Commit graph

1,403,262 commits

Author SHA1 Message Date
Guangguan Wang
bfc6c67ec2 net/smc: use the correct ndev to find pnetid by pnetid table
When using smc_pnet in SMC, it will only search the pnetid in the
base_ndev of the netdev hierarchy(both HW PNETID and User-defined
sw pnetid). This may not work for some scenarios when using SMC in
container on cloud environment.
In container, there have choices of different container network,
such as directly using host network, virtual network IPVLAN, veth,
etc. Different choices of container network have different netdev
hierarchy. Examples of netdev hierarchy show below. (eth0 and eth1
in host below is the netdev directly related to the physical device).
            _______________________________
           |   _________________           |
           |  |POD              |          |
           |  |                 |          |
           |  | eth0_________   |          |
           |  |____|         |__|          |
           |       |         |             |
           |       |         |             |
           |   eth1|base_ndev| eth0_______ |
           |       |         |    | RDMA  ||
           | host  |_________|    |_______||
           ---------------------------------
     netdev hierarchy if directly using host network
           ________________________________
           |   _________________           |
           |  |POD  __________  |          |
           |  |    |upper_ndev| |          |
           |  |eth0|__________| |          |
           |  |_______|_________|          |
           |          |lower netdev        |
           |        __|______              |
           |   eth1|         | eth0_______ |
           |       |base_ndev|    | RDMA  ||
           | host  |_________|    |_______||
           ---------------------------------
            netdev hierarchy if using IPVLAN
            _______________________________
           |   _____________________       |
           |  |POD        _________ |      |
           |  |          |base_ndev||      |
           |  |eth0(veth)|_________||      |
           |  |____________|________|      |
           |               |pairs          |
           |        _______|_              |
           |       |         | eth0_______ |
           |   veth|base_ndev|    | RDMA  ||
           |       |_________|    |_______||
           |        _________              |
           |   eth1|base_ndev|             |
           | host  |_________|             |
           ---------------------------------
             netdev hierarchy if using veth
Due to some reasons, the eth1 in host is not RDMA attached netdevice,
pnetid is needed to map the eth1(in host) with RDMA device so that POD
can do SMC-R. Because the eth1(in host) is managed by CNI plugin(such
as Terway, network management plugin in container environment), and in
cloud environment the eth(in host) can dynamically be inserted by CNI
when POD create and dynamically be removed by CNI when POD destroy and
no POD related to the eth(in host) anymore. It is hard to config the
pnetid to the eth1(in host). But it is easy to config the pnetid to the
netdevice which can be seen in POD. When do SMC-R, both the container
directly using host network and the container using veth network can
successfully match the RDMA device, because the configured pnetid netdev
is a base_ndev. But the container using IPVLAN can not successfully
match the RDMA device and 0x03030000 fallback happens, because the
configured pnetid netdev is not a base_ndev. Additionally, if config
pnetid to the eth1(in host) also can not work for matching RDMA device
when using veth network and doing SMC-R in POD.

To resolve the problems list above, this patch extends to search user
-defined sw pnetid in the clc handshake ndev when no pnetid can be found
in the base_ndev, and the base_ndev take precedence over ndev for backward
compatibility. This patch also can unify the pnetid setup of different
network choices list above in container(Config user-defined sw pnetid in
the netdevice can be seen in POD).

Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-14 12:54:40 +00:00
Dan Carpenter
5442d22da7 Coresight: Fix a NULL vs IS_ERR() bug in probe
The devm_platform_get_and_ioremap_resource() function doesn't
return NULL, it returns error pointers.  Update the checking to
match.

Fixes: f78d206f3d ("Coresight: Add Coresight TMC Control Unit driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/dab039b9-d58a-41be-92f0-ff209cfabfe2@stanley.mountain
2025-03-14 12:43:53 +00:00
Matthew Wilcox (Oracle)
ca3ac4bf4d xfs: Use abs_diff instead of XFS_ABSDIFF
We have a central definition for this function since 2023, used by
a number of different parts of the kernel.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-03-14 13:40:17 +01:00
Tengda Wu
0b4ffbe488 tracing: Correct the refcount if the hist/hist_debug file fails to open
The function event_{hist,hist_debug}_open() maintains the refcount of
'file->tr' and 'file' through tracing_open_file_tr(). However, it does
not roll back these counts on subsequent failure paths, resulting in a
refcount leak.

A very obvious case is that if the hist/hist_debug file belongs to a
specific instance, the refcount leak will prevent the deletion of that
instance, as it relies on the condition 'tr->ref == 1' within
__remove_instance().

Fix this by calling tracing_release_file_tr() on all failure paths in
event_{hist,hist_debug}_open() to correct the refcount.

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Link: https://lore.kernel.org/20250314065335.1202817-1-wutengda@huaweicloud.com
Fixes: 1cc111b9cd ("tracing: Fix uaf issue when open the hist or hist_debug file")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-03-14 08:29:12 -04:00
Davide Caratti
6bffe88452 can: add protocol counter for AF_CAN sockets
The third column in the output of the following command:

| # grep CAN /proc/net/protocols

is systematically '0': use sock_prot_inuse_add() to account for the number
of sockets for each protocol on top of AF_CAN family.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/9db5d0e6c11b232ad895885616f1258882a32f61.1741952160.git.dcaratti@redhat.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-03-14 13:27:33 +01:00
Marc Kleine-Budde
52d48a3d67 Merge patch series "can: flexcan: only change CAN state when link up in system PM"
In this series Haibo Chen fixes several shortcomings of the suspend
and resume functions of the flexcan driver.

Link: https://patch.msgid.link/20250314110145.899179-1-haibo.chen@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-03-14 13:26:04 +01:00
Haibo Chen
5a19143124 can: flexcan: disable transceiver during system PM
During system PM, if no wakeup requirement, disable transceiver to
save power.

Fixes: 4de349e786 ("can: flexcan: fix resume function")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20250314110145.899179-2-haibo.chen@nxp.com
[mkl: add newlines]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-03-14 13:25:43 +01:00
Haibo Chen
fd99d6ed20 can: flexcan: only change CAN state when link up in system PM
After a suspend/resume cycle on a down interface, it will come up as
ERROR-ACTIVE.

$ ip -details -s -s a s dev flexcan0
3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10
    link/can  promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
    can state STOPPED (berr-counter tx 0 rx 0) restart-ms 1000

$ sudo systemctl suspend

$ ip -details -s -s a s dev flexcan0
3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10
    link/can  promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
    can state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 1000

And only set CAN state to CAN_STATE_ERROR_ACTIVE when resume process
has no issue, otherwise keep in CAN_STATE_SLEEPING as suspend did.

Fixes: 4de349e786 ("can: flexcan: fix resume function")
Cc: stable@vger.kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20250314110145.899179-1-haibo.chen@nxp.com
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Closes: https://lore.kernel.org/all/20250314-married-polar-elephant-b15594-mkl@pengutronix.de
[mkl: add newlines]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-03-14 13:25:12 +01:00
Lorenzo Bianconi
b904243247 dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
Introduce pbus-csr document bindings in syscon.yaml for EN7581 SoC.
The airoha pbus-csr block provides a configuration interface for the PBUS
controller used to detect if a given address is accessible on PCIe
controller.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250312-en7581-pbus_csr-binding-v3-1-7bd9f00a25a4@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
2025-03-14 11:48:35 +00:00
Dan Carpenter
3ce71a0893 mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
This doesn't affect how the code works because there are some implicit
casts, but the "ret" variable is used to hold negative error codes so
it should be type int.

Declare it as "int" instead of "unsigned int".

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/9e812dfa-e216-4e40-bbf0-d0b63b110bb0@stanley.mountain
Signed-off-by: Lee Jones <lee@kernel.org>
2025-03-14 11:48:03 +00:00
Dr. David Alan Gilbert
44356090d5 mfd: pcf50633: Remove remaining PCF50633 support
Remove the remaining parts of the 50633, the core, headers and glue.

The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b ("ARM: s3c: remove all s3c24xx support")

See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/

Remove it.

Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250311014959.743322-10-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
2025-03-14 11:42:51 +00:00
Dr. David Alan Gilbert
786ad21f43 mfd: pcf50633: Remove unused platform IRQ code
As part of the pcf50633 removal, take out it's irq code
(which includes one bit still called from the core, but it'll
go soon).

Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250311014959.743322-9-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
2025-03-14 11:42:40 +00:00
Dr. David Alan Gilbert
8559602247 mfd: pcF50633-gpio: Remove unused driver
The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b ("ARM: s3c: remove all s3c24xx support")

See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/

Remove it.

Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250311014959.743322-4-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
2025-03-14 11:42:35 +00:00
Dr. David Alan Gilbert
0d0e549538 mfd: pcf50633-adc: Remove unused driver
The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b ("ARM: s3c: remove all s3c24xx support")

See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/

Remove it.

Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250311014959.743322-2-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
2025-03-14 11:42:26 +00:00
Dr. David Alan Gilbert
dfc034a049 backlight: pcf50633-backlight: Remove unused driver
The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b ("ARM: s3c: remove all s3c24xx support")

See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/

Remove it.

Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250311014959.743322-8-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
2025-03-14 11:36:33 +00:00
Ard Biesheuvel
0dc1754e16 efi/libstub: Avoid legacy decompressor zlib/zstd wrappers
Remove EFI zboot's dependency on the decompression wrappers used by the
legacy decompressor boot code, which can only process the input in one
go, and this will not work for upcoming support for embedded ELF images.
They also do some odd things like providing a barebones malloc()
implementation, which is not needed in a hosted environment such as the
EFI boot services.

So instead, implement GZIP deflate and ZSTD decompression in terms of
the underlying libraries. Support for other compression algoritms has
already been dropped.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2025-03-14 12:36:11 +01:00
Ard Biesheuvel
cb16dfed00 efi/libstub: Avoid physical address 0x0 when doing random allocation
Ben reports spurious EFI zboot failures on a system where physical RAM
starts at 0x0. When doing random memory allocation from the EFI stub on
such a platform, a random seed of 0x0 (which means no entropy source is
available) will result in the allocation to be placed at address 0x0 if
sufficient space is available.

When this allocation is subsequently passed on to the decompression
code, the 0x0 address is mistaken for NULL and the code complains and
gives up.

So avoid address 0x0 when doing random allocation, and set the minimum
address to the minimum alignment.

Cc: <stable@vger.kernel.org>
Reported-by: Ben Schneider <ben@bens.haus>
Tested-by: Ben Schneider <ben@bens.haus>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2025-03-14 12:21:29 +01:00
Chen Ni
f82718251e mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
Replace comma between expressions with semicolons.

Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.

Found by inspection.
No functional change intended.
Compile tested only.

Fixes: 998f70d180 ("mfd: Add base driver for qnap-mcu devices")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250310031145.650950-1-nichen@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
2025-03-14 10:55:15 +00:00
WangYuli
c9fe785857 backlight: tdo24m: Eliminate redundant whitespace
The description for CONFIG_LCD_TDO24M has redundant whitespace.
Trim it to keep the code tidy.

Signed-off-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/r/8FC39A4DC2529591+20250310045636.14329-1-wangyuli@uniontech.com
Signed-off-by: Lee Jones <lee@kernel.org>
2025-03-14 10:53:54 +00:00
NeilBrown
64a56f635a
exportfs: remove locking around ->get_parent() call.
The locking around the ->get_parent() call brings no value.
We are locking a child which is only used to find an inode and thence the
parent inode number.  All further activity involves the parent inode
which may have several children so locking one child cannot protect the
parent in any useful way.

The filesystem must already ensure that only one 'struct inode' exists
for a given inode, and will call d_obtain_alias() which contains the
required locking to ensure only one dentry will be attached to that
inode.

So remove the unnecessary locking.

Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/r/174190497326.9342.9313518146512158587@noble.neil.brown.name
Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-03-14 11:39:59 +01:00
Dr. David Alan Gilbert
421d62f47b xen/pciback: Remove unused pcistub_get_pci_dev
pcistub_get_pci_dev() was added in 2009 as part of:
commit 30edc14bf3 ("xen/pciback: xen pci backend driver.")

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250307004736.291229-1-linux@treblig.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
2025-03-14 11:19:49 +01:00
Jan Beulich
5c4e79e29a xenfs/xensyms: respect hypervisor's "next" indication
The interface specifies the symnum field as an input and output; the
hypervisor sets it to the next sequential symbol's index. xensyms_next()
incrementing the position explicitly (and xensyms_next_sym()
decrementing it to "rewind") is only correct as long as the sequence of
symbol indexes is non-sparse. Use the hypervisor-supplied value instead
to update the position in xensyms_next(), and use the saved incoming
index in xensyms_next_sym().

Cc: stable@kernel.org
Fixes: a11f4f0a4e ("xen: xensyms support")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <15d5e7fa-ec5d-422f-9319-d28bed916349@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2025-03-14 11:18:59 +01:00
Ricard Wanderlof
c2820405ba ALSA: usb-audio: Fix CME quirk for UF series keyboards
Fix quirk for CME master keyboards so it not only handles
sysex but also song position pointer, MIDI timing clock, start
and stop messages, and active sensing. All of these can be
output by the CME UF series master keyboards.

Tested with a CME UF6 in a desktop Linux environment as
well as on the Zynthian Raspberry Pi based platform.

Signed-off-by: Ricard Wanderlof <ricard2013@butoba.net>
Link: https://patch.msgid.link/20250313-cme-fix-v1-1-d404889e4de8@butoba.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-03-14 11:18:14 +01:00
Kees Cook
1c3dfc7c6b xen/mcelog: Add __nonstring annotations for unterminated strings
When a character array without a terminating NUL character has a static
initializer, GCC 15's -Wunterminated-string-initialization will only
warn if the array lacks the "nonstring" attribute[1]. Mark the arrays
with __nonstring to and correctly identify the char array as "not a C
string" and thereby eliminate the warning.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1]
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250310222234.work.473-kees@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
2025-03-14 11:15:16 +01:00
Takashi Iwai
9335a36faa ALSA: intel-hdmi-audio: Convert to SYSTEM_SLEEP_PM_OPS()
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us
dropping ugly __maybe_unused attributes.

This optimizes slightly	when CONFIG_PM is disabled, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-10-tiwai@suse.de
2025-03-14 11:07:14 +01:00
Takashi Iwai
f3f9dfde4c ALSA: vx222: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
Use the newer DEFINE_SIMPLE_DEV_PM_OPS() macro instead of
SIMPLE_DEV_PM_OPS() together with pm_ptr(), which makes
CONFIG_PM_SLEEP ifdefs superfluous.

Merely a cleanup, there should be no actual code change.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-9-tiwai@suse.de
2025-03-14 11:07:13 +01:00
Takashi Iwai
5ea0a2206b ALSA: oxygen: Convert to EXPORT_SIMPLE_DEV_PM_OPS()
Use the newer EXPORT_SIMPLE_DEV_PM_OPS() macro instead of
SIPLE_DEV_PM_OPS() and manual export, together with pm_ptr() macro,
which makes CONFIG_PM_SLEEP ifdefs superfluous.

Merely a cleanup, there should be no actual code change.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-8-tiwai@suse.de
2025-03-14 11:07:13 +01:00
Takashi Iwai
f923335da9 ALSA: hda/tegra: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS()
together with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.

This optimizes slightly	when CONFIG_PM is disabled, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-7-tiwai@suse.de
2025-03-14 11:07:13 +01:00
Takashi Iwai
dd69342a04 ALSA: hda-intel: Convert to RUNTIME_PM_OPS()
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.

This optimizes slightly	when CONFIG_PM is disabled, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-6-tiwai@suse.de
2025-03-14 11:07:13 +01:00
Takashi Iwai
3f38aa32c5 ALSA: hda: Use RUNTIME_PM_OPS() and pm_ptr()
Clean up the code with the helper macros, and also assure that no PM
ops is assigned without CONFIG_PM via pm_ptr().

Merely a cleanup, there should be no actual code change.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-5-tiwai@suse.de
2025-03-14 11:07:13 +01:00
Takashi Iwai
0d8dfeba4b ALSA: pcm: Convert to SYSTEM_SLEEP_PM_OPS()
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS(), which makes CONFIG_PM_SLEEP ifdefs
superfluous.

Merely a cleanup, there should be no actual code change.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-4-tiwai@suse.de
2025-03-14 11:07:13 +01:00
Takashi Iwai
4c60cf85e2 ALSA: atmel: Convert to DEFINE_SIMPLE_DEV_PM_OPS() macro
Use the newer DEFINE_SIMPLE_DEV_PM_OPS() macro instead of
SIMPLE_DEV_PM_OPS() together with pm_ptr(), which makes
CONFIG_PM_SLEEP ifdefs superfluous.

Merely a cleanup, there should be no actual code change.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-3-tiwai@suse.de
2025-03-14 11:07:13 +01:00
Takashi Iwai
3954382bb5 ALSA: ac97: Convert to RUNTIME_PM_OPS() macro
Use a newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr(), which makes CONFIG_PM ifdefs superfluous.

This optimizes slightly when CONFIG_PM is disabled, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-2-tiwai@suse.de
2025-03-14 11:07:13 +01:00
Frediano Ziglio
2356f15cae xen: Add support for XenServer 6.1 platform device
On XenServer on Windows machine a platform device with ID 2 instead of
1 is used.

This device is mainly identical to device 1 but due to some Windows
update behaviour it was decided to use a device with a different ID.

This causes compatibility issues with Linux which expects, if Xen
is detected, to find a Xen platform device (5853:0001) otherwise code
will crash due to some missing initialization (specifically grant
tables). Specifically from dmesg

    RIP: 0010:gnttab_expand+0x29/0x210
    Code: 90 0f 1f 44 00 00 55 31 d2 48 89 e5 41 57 41 56 41 55 41 89 fd
          41 54 53 48 83 ec 10 48 8b 05 7e 9a 49 02 44 8b 35 a7 9a 49 02
          <8b> 48 04 8d 44 39 ff f7 f1 45 8d 24 06 89 c3 e8 43 fe ff ff
          44 39
    RSP: 0000:ffffba34c01fbc88 EFLAGS: 00010086
    ...

The device 2 is presented by Xapi adding device specification to
Qemu command line.

Signed-off-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Acked-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250227145016.25350-1-frediano.ziglio@cloud.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2025-03-14 11:04:25 +01:00
Prathamesh Shete
c12bfa0fee pinctrl-tegra: Restore SFSEL bit when freeing pins
Each pin can be configured as a Special Function IO (SFIO) or GPIO,
where the SFIO enables the pin to operate in alternative modes such as
I2C, SPI, etc.

The current implementation sets all the pins back to SFIO mode
even if they were initially in GPIO mode. This can cause glitches
on the pins when pinctrl_gpio_free() is called.

Avoid these undesired glitches by storing the pin's SFIO/GPIO
state on GPIO request and restoring it on GPIO free.

Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Link: https://lore.kernel.org/20250305104939.15168-2-pshete@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-14 11:03:49 +01:00
Prathamesh Shete
4fd41e74bd pinctrl: tegra: Add descriptions for SoC data fields
Add detailed descriptions for the remaining fields in the
tegra_pinctrl_soc_data structure. This improves code documentation
and clarifies the purpose of each field, particularly for the
pin-specific configuration options.

Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Link: https://lore.kernel.org/20250305104939.15168-1-pshete@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-14 11:03:49 +01:00
Bartosz Golaszewski
597b3627d5 pinctrl: spacemit: destroy mutex at driver detach
The mutex initialized in probe() is never cleaned up. Use
devm_mutex_init() to destroy it automatically.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/20250305102710.52762-1-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-14 11:02:08 +01:00
David Woodhouse
b25eb5f5e4 x86/kexec: Add relocate_kernel() debugging support: Load a GDT
There are some failure modes which lead to triple-faults in the
relocate_kernel() function, which is fairly much undebuggable
for normal mortals.

Adding a GDT in the relocate_kernel() environment is step 1 towards
being able to catch faults and do something more useful.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250312144257.2348250-2-dwmw2@infradead.org
2025-03-14 11:01:53 +01:00
H. Nikolaus Schaller
8171e7b929 pinctrl: ingenic: jz4730: add pinmux for I2S interface
I2S is used for the sound codec of the Alpha400.

Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/7e79b16be569fb0f501032b2b6ec726e4a09411f.1740823241.git.hns@goldelico.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-14 10:51:23 +01:00
H. Nikolaus Schaller
4b490ccbc3 pinctrl: ingenic: jz4730: add pinmux for MII
The MII interface is used for the Ethernet connection of the Alpha400.

Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/972b31e1fce03808745e53df17315b29e2bcf696.1740823241.git.hns@goldelico.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-14 10:51:23 +01:00
Paul Boddie
4da56f9c6f pinctrl: ingenic: add x1600 support
Add support for the Lumissil/Ingenic X1600 SoC.

It uses shadow registers to commit changes to multiple pinctrl
registers in parallel.

Define specific Chip ID, register offsets, pin tables etc.

Handling the unique X1600_GPIO_PU only for the x1600 but
not for x1830 and above must be carefully taken into account.

Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Co-authored-by: Andreas Kemnade <andreas@kemnade.info>
Co-authored-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Paul Boddie <paul@boddie.org.uk>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/84477ec9cb9ed13bf4f6f87d5fb3b55542d31097.1740823241.git.hns@goldelico.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-14 10:51:22 +01:00
H. Nikolaus Schaller
33d6b8ca05 bindings: pinctrl: ingenic: add x1600
Add bindings for the Lumissil/Ingenic X1600 SoC.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/a9865c817d5aa9046dcbb251d834c1dbcc4e9219.1740823241.git.hns@goldelico.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-14 10:51:22 +01:00
Matthieu Baerts (NGI0)
a1e36ec363 selftests: drv-net: fix merge conflicts resolution
After the recent merge between net-next and net, I got some conflicts on
my side because the merge resolution was different from Stephen's one
[1] I applied on my side in the MPTCP tree.

It looks like the code that is now in net-next is using the old way to
retrieve the local and remote addresses. This patch is now using the new
way, like what was in Stephen's email [1].

Also, in get_interface_info(), there were no conflicts in this area,
because that was new code from 'net', but a small adaptation was needed
there as well to get the remote address.

Fixes: 941defcea7 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Link: https://lore.kernel.org/20250311115758.17a1d414@canb.auug.org.au [1]
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250314-net-next-drv-net-ping-fix-merge-v1-1-0d5c19daf707@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-14 10:24:14 +01:00
Philipp Stanner
f09d3937d4
PCI: Fix wrong length of devres array
The array for the iomapping cookie addresses has a length of
PCI_STD_NUM_BARS. This constant, however, only describes standard BARs;
while PCI can allow for additional, special BARs.

The total number of PCI resources is described by constant
PCI_NUM_RESOURCES, which is also used in, e.g., pci_select_bars().

Thus, the devres array has so far been too small.

Change the length of the devres array to PCI_NUM_RESOURCES.

Link: https://lore.kernel.org/r/20250312080634.13731-3-phasta@kernel.org
Fixes: bbaff68bf4 ("PCI: Add managed partial-BAR request and map infrastructure")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: stable@vger.kernel.org	# v6.11+
2025-03-14 09:22:24 +00:00
Ankit Nautiyal
ff568d622b drm/i915/display: Maintain asciibetical order for HAS_* macros
Move HAS_* macros to maintain asciibetical order.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250312054424.1628358-1-ankit.k.nautiyal@intel.com
2025-03-14 14:47:15 +05:30
Philipp Stanner
9df13c356d drm/sched: Clarify docu concerning drm_sched_job_arm()
The documentation for drm_sched_job_arm() and especially
drm_sched_job_cleanup() does not make it very clear why
drm_sched_job_arm() is a point of no return, which it indeed is.

Make the nature of drm_sched_job_arm() in the docu as clear as possible.

Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313093053.65001-2-phasta@kernel.org
2025-03-14 10:02:49 +01:00
Andrew Perepech
be23147462 mfd: mt6397-core: Add mfd_cell for mt6359-accdet
Add an mfd_cell for mt6359-accdet and describe its IRQ resources to
allow the mt6359-accdet driver to probe.

Signed-off-by: Andrew Perepech <andrew.perepech@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20250305-mt6359-accdet-dts-v4-2-e5ffa5ee9991@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
2025-03-14 08:59:07 +00:00
Chukun Pan
7f3e3e7228 dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
Document rk3528 compatible for QoS registers.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250306123809.273655-2-amadeus@jmu.edu.cn
Signed-off-by: Lee Jones <lee@kernel.org>
2025-03-14 08:59:07 +00:00
Dharma Balasubiramani
4eb2b722c0 dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
Add flexcom binding documentation for sama7d65.

Consolidated entries into one enum to match proper coding style.

Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/9656d46ee0255b9aba404d77d2d204376a9cb248.1736522006.git.Ryan.Wanner@microchip.com
Signed-off-by: Lee Jones <lee@kernel.org>
2025-03-14 08:59:07 +00:00
Dr. David Alan Gilbert
0d1217ab7f mfd: ezx-pcap: Remove unused pcap_adc_sync
pcap_adc_sync() was added in 2009 by commit 13a09f93d2 ("mfd: add PCAP
driver") but has remained unused; the async version is still used.

Remove it.

Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250306011027.257021-1-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
2025-03-14 08:59:07 +00:00