Commit graph

1,403,262 commits

Author SHA1 Message Date
Nikita Zhandarovich
2d52de55f9 drm/radeon: fix uninitialized size issue in radeon_vce_cs_parse()
On the off chance that command stream passed from userspace via
ioctl() call to radeon_vce_cs_parse() is weirdly crafted and
first command to execute is to encode (case 0x03000001), the function
in question will attempt to call radeon_vce_cs_reloc() with size
argument that has not been properly initialized. Specifically, 'size'
will point to 'tmp' variable before the latter had a chance to be
assigned any value.

Play it safe and init 'tmp' with 0, thus ensuring that
radeon_vce_cs_reloc() will catch an early error in cases like these.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 2fc5703abd ("drm/radeon: check VCE relocation buffer range v3")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-13 23:07:07 -04:00
Mark Brown
e0afd7d370
ASoC: Merge up fixes
Merge the for-6.14 to resolve conflicts with simple-card-utils.c due to
parallel delveopment.
2025-03-14 02:31:06 +00:00
Dave Airlie
c8a74954cd - Do cdclk post plane programming later (Ville)
- Bump MMAP_GTT_VERSION: missing indication of partial mmaps support (Jose)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmfTBkIACgkQ+mJfZA7r
 E8rW1ggAhGlmBcj/QQnJYkha5l5OuRsF+O9n/pae6m8LkGeGMCEUY2mt7scxCQXw
 RJ2AYfV+kyZYFsY5GkrQWUSXhYUBfaLAgZmyd3VuSihvf/jU7Dk7X7xxTlHOC+vT
 tESLkoy8j4kPB6IbtN8sVo+TugQOJZix+ok7zLZK/l2lvU66Cd7VY8nZL8EuhGeP
 GeNXGL5xtdpx9+F0dhNu7+0spAEBjlJSW5mhT8/mYg5G397/GTUoi6hFKt+MjBwR
 XcRNy5VLMZHc1J8dexylTZ/MdPVqqSKpIfthAesGVSu2b7v/lljhFeFGOrnYuc1T
 MLrnS+MqH5Q3DFbJAM8ljD3IXt7aKA==
 =kAbt
 -----END PGP SIGNATURE-----

Merge tag 'drm-intel-fixes-2025-03-13' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes

- Do cdclk post plane programming later (Ville)
- Bump MMAP_GTT_VERSION: missing indication of partial mmaps support (Jose)

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z9MG4fH-6Q8dTHE1@intel.com
2025-03-14 12:30:49 +10:00
Linus Torvalds
e3a854b577 A few clk driver fixes for Samsung and Qualcomm clk drivers
- Suspend on Google GS101 crashes when trying to save some clk
    registers that we shouldn't be saving so we don't do that anymore
 
  - The PLL lock time was wrong on the Tesla FSD which could lead to the
    PLL never locking
 
  - Qualcomm's display clk controller on SM8750 was trying to change the
    frequency of a parent clk for the DSI device when it should have
    stopped and adjusted the divider. The failure is that the clk
    frequency was half what was expected, leading to broken display.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmfTfQYRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSW2YBAArHpBcdJKRhm+8QO1KDSR0wB09t/nxbTY
 MUsGh1hnPKaPXHWgQO6uwb6jM/Zw+bNabhmo2DhGn4tT9dRHH9CD3JQ2KNYybC0R
 /VCxd0M8Smr4DZAWd0F0VQPIbRO72eGI9jBT8mg59RJGmslNkThkBBBDXB5FNoyN
 X0FZCOY4qbNtI+kJL28CdTFTIgESGBWJKjYVX3GUbKyZGL2z8RwY9OziqQQIeSqV
 AAypiMgLw9gTPz+wlDx0z04ulehe0xJcyV9+69pIpdGlio4SgL+kfSvgcVttAPqY
 /h4ZXBL/FWUNhOhyo4CmU+kWyxD81sqvHmBqCksSVuH+Y0w3SQ9KDREiv2nuIc5K
 TVOkjNJk0Ts6XtIrm8E8r9WNed9tWZfOZPLAfUt1PUVzXWQR9Hnat+jiETKXWbor
 pEQR8vNxFq7z5i4vlytMu1FN1/3N9G+ppB+c/GhImV33IWnybzVaep/+wjj0Pdw+
 bxSRhcHsjBJfEp+PCzzJbXj5AY0ozWy5hoENtX1uJCesrE/JLMErFx2hQkIXD7WI
 9d20Nf23OngietozL77NCQ46KkqGij2TyhtHm3apiPK7wEjNmQbBFwU6i0Yjfyf7
 BtdMGbxQ6s5ny54GbOrXte+jol47njOQGL2BBUp0v6lAIXzLY2E8pStNYU1D8Icw
 o5WH0PPlyt8=
 =bKlG
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "A few clk driver fixes for Samsung and Qualcomm clk drivers:

   - Suspend on Google GS101 crashes when trying to save some clk
     registers that we shouldn't be saving so we don't do that anymore

   - The PLL lock time was wrong on the Tesla FSD which could lead to
     the PLL never locking

   - Qualcomm's display clk controller on SM8750 was trying to change
     the frequency of a parent clk for the DSI device when it should
     have stopped and adjusted the divider. The failure is that the clk
     frequency was half what was expected, leading to broken display"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: samsung: update PLL locktime for PLL142XX used on FSD platform
  clk: samsung: gs101: fix synchronous external abort in samsung_clk_save()
  clk: qcom: dispcc-sm8750: Drop incorrect CLK_SET_RATE_PARENT on byte intf parent
2025-03-13 15:34:26 -10:00
Linus Torvalds
131c040bbb bcachefs fixes for 6.14-rc7
Roxana caught an unitialized value that might explain some of the
 rebalance weirdness we're still tracking down - cool.
 
 Otherwise pretty minor.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEKnAFLkS8Qha+jvQrE6szbY3KbnYFAmfTX2wACgkQE6szbY3K
 bna/lQ//V6zmWnPTDXt46ztAeOTucFgfIivevH1fznSEMqkxFYJVdjtHscYcO8SJ
 GRYeNaz4ioKxMIcz5OU32uES/hXeOgwc43wxkWud3O8P0IkRIsLDYth9ejbOn1lf
 U0jPC0DMNLqeVi8PrmnQM6QdV6BwUHAay6v8HB830QGhMq7S+ajl5F2F0irk4Fpn
 YLE+m1CG14G+8ckxNcfkwjV1uh/0kt/aWX9Oii2MH0pH81ycug8B/Ld2RCs/31SN
 9kopfcTsPx4oVJ8D3WrhnPl5R79l7qTa5h1ahiBu2Y/V3wfmTf5GAxESZrXInOgd
 bU1Q+LQfq9semgiztXUESkcsFVkk5UEflAlm/zf0DauCjJUwZ18e/nogz6gRLfA7
 HXZJvSWkTFnKoddJySSXeZFUXLqS2uGykJJS+Fl7NQCvUM2WztaGkNc8Aw4engfZ
 l3/6iaT3mSYHJkNWdtQuFo0tm+YAAF5yYXmho2oH/CX8uH8t4fSSqUL7sy876p52
 BOj+RMX8ErviwBUwt0cfz40AGtPiCQcuvv5TSvRoiYas1ItIo5fjlX+RCK4Z7/GI
 MdHMC8tFbMQkGvHdFyaRe3nP72Jp4+zpU7jsx+hqs/wYgKD8S1j3uBgq9LD8qMLV
 Ikt08CWtVUIR93dKbqlK8pFkkLNj6rwn+CQFCxm34W03Y3LctRc=
 =Li6S
 -----END PGP SIGNATURE-----

Merge tag 'bcachefs-2025-03-13' of git://evilpiepirate.org/bcachefs

Pull bcachefs fixes from Kent Overstreet:
 "Roxana caught an unitialized value that might explain some of the
  rebalance weirdness we're still tracking down - cool.

  Otherwise pretty minor"

* tag 'bcachefs-2025-03-13' of git://evilpiepirate.org/bcachefs:
  bcachefs: bch2_get_random_u64_below()
  bcachefs: target_congested -> get_random_u32_below()
  bcachefs: fix tiny leak in bch2_dev_add()
  bcachefs: Make sure trans is unlocked when submitting read IO
  bcachefs: Initialize from_inode members for bch_io_opts
  bcachefs: Fix b->written overflow
2025-03-13 15:10:59 -10:00
Dave Airlie
d703575ade A null pointer check for gma500, two clippy fixes for panic, a fix for
an interaction between DPMS and atomic leading to dropped frames, and
 a locking fix  for dp_mst
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZ9KK6QAKCRDj7w1vZxhR
 xf6AAQCH0DwU7ymzHStkJRP7HbBWG9vibLkWzWQ4QDZTv+v7mwD+Mvl3n0C1DqWc
 FDimBS+tYU0p6ltZ8vnyjHksFyKxXQA=
 =aytA
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2025-03-13' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

A null pointer check for gma500, two clippy fixes for panic, a fix for
an interaction between DPMS and atomic leading to dropped frames, and
a locking fix  for dp_mst

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-holistic-clay-moose-fead28@houat
2025-03-14 11:09:40 +10:00
Wolfram Sang
86484e08d8 dt-bindings: clocks: atmel,at91rm9200-pmc: add missing compatibles
The driver support more SoCs. Add the missing ones.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250213092728.11659-2-wsa+renesas@sang-engineering.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-03-13 18:01:58 -07:00
Heiko Stuebner
9d484eac1e dt-bindings: reset: fix double id on rk3562-cru reset ids
Id 173 was accidentially used two times for SRST_P_DDR_HWLP and
SRST_P_DDR_PHY. This makes both resets ambiguous and also causes build
warnings like:

drivers/clk/rockchip/rst-rk3562.c:21:57: error: initialized field overwritten [-Werror=override-init]
   21 | #define RK3562_DDRCRU_RESET_OFFSET(id, reg, bit) [id] = (0x20000*4 + reg * 16 + bit)
      |                                                         ^
drivers/clk/rockchip/rst-rk3562.c:266:9: note: in expansion of macro 'RK3562_DDRCRU_RESET_OFFSET'
  266 |         RK3562_DDRCRU_RESET_OFFSET(SRST_P_DDR_PHY, 0, 8),
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/clk/rockchip/rst-rk3562.c:21:57: note: (near initialization for 'rk3562_register_offset[173]')
   21 | #define RK3562_DDRCRU_RESET_OFFSET(id, reg, bit) [id] = (0x20000*4 + reg * 16 + bit)
      |                                                         ^
drivers/clk/rockchip/rst-rk3562.c:266:9: note: in expansion of macro 'RK3562_DDRCRU_RESET_OFFSET'
  266 |         RK3562_DDRCRU_RESET_OFFSET(SRST_P_DDR_PHY, 0, 8),
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~

To fix that issue give SRST_P_DDR_PHY a new and now unique id.

Reported-by: Stephen Boyd <sboyd@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503121743.0zcDf6nE-lkp@intel.com/
Fixes: dd113c4fef ("dt-bindings: clock: Add RK3562 cru")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250312215923.275625-1-heiko@sntech.de
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-03-13 17:54:29 -07:00
Dave Airlie
385b64321c amd-drm-fixes-6.14-2025-03-12:
amdgpu:
 - GC 12.x DCC fix
 - DC DCE 6.x fix
 - Hibernation fix
 - HPD fix
 - Backlight fixes
 - Color depth fix
 - UAF fix in hdcp_work
 - VCE 2.x fix
 - GC 12.x PTE fix
 
 amdkfd:
 - Queue eviction fix
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZ9HbLgAKCRC93/aFa7yZ
 2ANhAQC/WwKW84Me4z7ctLZgxpu+bLsMAVGelvf7BxFbKxEm4gD+INlGbaxDTcKM
 zwoXQ1fPTa2kkalWbK48kpDtg1M2xQ4=
 =+yFd
 -----END PGP SIGNATURE-----

Merge tag 'amd-drm-fixes-6.14-2025-03-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.14-2025-03-12:

amdgpu:
- GC 12.x DCC fix
- DC DCE 6.x fix
- Hibernation fix
- HPD fix
- Backlight fixes
- Color depth fix
- UAF fix in hdcp_work
- VCE 2.x fix
- GC 12.x PTE fix

amdkfd:
- Queue eviction fix

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250312190931.216506-1-alexander.deucher@amd.com
2025-03-14 09:17:33 +10:00
Frank Wunderlich
3b2e1b87ad
dt-bindings: spi: add compatibles for mt7988
MT7988 has 2 different spi controllers. Add their compatibles.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241109105029.52748-1-linux@fw-web.de
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-13 22:55:22 +00:00
Krzysztof Kozlowski
6174206a4b remoteproc: qcom: pas: Add SM8750 MPSS
Add remote processor PAS loaders for SM8750 MPSS (modem), which differs
from SM8650 by lack of fifth memory region for Qlink Logging.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250221160300.160404-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 15:50:55 -07:00
Krzysztof Kozlowski
89f95f2108 dt-bindings: remoteproc: Add SM8750 MPSS
Add remote processor PAS loader for SM8750 MPSS (modem).  Device looks
fully compatible with SM8650, however it lacks fifth memory region for
Qlink Logging, according to downstream sources.  This is a bit tricky,
because updated downstream sources for newer downstream release dropped
that fifth memory region as well.

There might be other differences against SM8650, because the modem
currently crashes after starting.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250221160300.160404-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 15:50:55 -07:00
Ryan Walklin
d389719fb4
ASoC: sun4i-codec: add h616 card long_name
Adding jack detection requires sound servers to act on the emitted
events, which are described by ALSA Use Case Manager configurations in
userspace. These configurations include the long card name in the file
path (falling back to card->name if this is not present), so add a long
card name for the H616 without spaces, making UCM referencing easier.

The corresponding ALSA UCM patch is here (now merged):
https://github.com/alsa-project/alsa-ucm-conf/pull/491

Signed-off-by: Ryan Walklin <ryan@testtoast.com>

--
Changelog v1..v2:
- Separate patch for card->long_name
- Note UCM patch link

Changelog v2..v3:
- Add card->long_name rather than change existing card->name

Link: https://patch.msgid.link/20250214220247.10810-6-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-13 22:50:07 +00:00
Ryan Walklin
a149377c03
ASoC: sun4i-codec: support hp-det-gpios property
Add support for GPIO headphone detection with the hp-det-gpios
property. In order for this to properly disable the path upon
removal of headphones, the output must be labelled Headphone which
is a common sink in the driver.

Describe a headphone jack and detection GPIO in the driver, check for
a corresponding device tree node, and enable jack detection in a new
machine init function if described.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>

--
Changelog v1..v2:
- Separate DAPM changes into separate patch and add rationale.

Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20250214220247.10810-4-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-13 22:50:06 +00:00
Ryan Walklin
ae5f76d404
ASoC: sun4i-codec: correct dapm widgets and controls for h616
The previous H616 support patch added a single LINEOUT DAPM pin switch
to the card controls. As the codec in this SoC only has a single route,
this seemed reasonable at the time, however is redundant given the
existing DAPM codec widget definitions controlling the digital and
analog sides of the codec.

It is also insufficient to describe the scenario where separate
components (muxes, jack detection etc) are used to modify the audio
route external to the SoC. For example the Anbernic RG(##)XX series of
devices uses a headphone jack detection switch, GPIO-controlled speaker
amplifier and a passive external mux chip to route audio.

Remove the redundant LINEOUT card control, and add a Speaker pin switch
control and Headphone DAPM widget to allow control of the above
hardware.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20250214220247.10810-3-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-13 22:50:05 +00:00
Rayyan Ansari
65f330ade7 dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
Add compatible for "qcom,msm8916-acc", used in msm8916.dtsi, to the dt
schema.

Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240710155226.130086-1-rayyan.ansari@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 17:50:04 -05:00
Chris Morgan
7bda89a248
ASoC: dt-bindings: sun4i-a10-codec: add hp-det-gpios
Devices integrating Allwinner SoCs may use line-out or headphone jacks
with jack detection circuits attached to a GPIO. Support defining these
in DTs.

A number of Anbernic devices featuring the H700 SoC use this mechanism
to switch between a headphone jack and an internal speaker, so add these
to the allowed routing items.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

--

Changelog v1..v2:
- Remove vendor prefix from hp-det-gpios

Changelog v2..v3:
- Add Reviewed-by tag

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20250214220247.10810-2-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-13 22:50:04 +00:00
Manikanta Mylavarapu
e9ed0ac3cc drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock
The divider values in the sdcc1_apps frequency table were incorrectly
updated, assuming the frequency of gpll2_out_main to be 1152MHz.
However, the frequency of the gpll2_out_main clock is actually 576MHz
(gpll2/2).

Due to these incorrect divider values, the sdcc1_apps clock is running
at half of the expected frequency.

Fixing the frequency table of sdcc1_apps allows the sdcc1_apps clock to
run according to the frequency plan.

Fixes: 21b5d5a4a3 ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5424 SoC")
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250306112900.3319330-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 17:43:35 -05:00
Maud Spierings
10254a6c60
spi: spidev: Add an entry for the gocontroll moduline module slot
The main point of the Moduline series of embedded controllers is its
ecosystem of IO modules, these are currently operated through the spidev
interface. Ideally there will be a full dedicated driver in the future.

Add the gocontroll moduline-module-slot device to enable the required
spidev interface.

Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-12-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-13 22:43:18 +00:00
Maud Spierings
8f1cc52425
MAINTAINERS: add maintainer for the GOcontroll Moduline module slot
Add a maintainer for the GOcontroll Moduline module slot bindings and
future driver.

Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-6-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-13 22:43:17 +00:00
Maud Spierings
43fd4d2f4f
dt-bindings: connector: Add the GOcontroll Moduline module slot bindings
Add the bindings that describe a GOcontroll Moduline module slot. This
slot provides all the interfaces to interface with a Moduline compatible
IO module. The actual module is not reasonable to describe as it can be
swapped at will, with this connector the driver will be able to probe
for a module on boot.

The connector consists of 2 parts, one part for interfacing with the SoC
and main board, the other part has 13 IO channels for the module to
interact with the outside world. The functions of these IO channels are
determined by the type of module in the slot. The IO on the SoC side is
as follows:

 - a 3v3 supply, this tends to be the logic level of the module and its
   microcontroller
 - a 5v0 supply, this can be used to power low power peripherals on the
   module
 - a 6v-8v supply, this can be used for high power peripherals on the
   module
 - a 6v-30v supply, this tends to be a dirty supply that comes from the
   controller supply after some circuit protection, or is the same as
   the 6v-8v supply.
 - an SPI bus which carries the communication between the SoC and the
   microcontroller on the module.
 - an I2C bus shared between the SoC and all module slots which can
   carry direct module-to-module communication.
 - a reset line
 - an interrupt line that indicates a clear to transmit signal
 - a sync line shared between the SoC and all module slots which could
   be used to synchronize modules for time sensitive IO spread across
   modules.
 - a SMBus alert line that is shared between the modules but is not
   connected to the SoC so that is ignored.

A slot-number property is used to identify the physical location of a
module slot. Without it, it would be impossible to identify which module
to control if there are multiple of one type, to address the desired IO.

Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-3-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-13 22:43:16 +00:00
Maud Spierings
5f0d2de417
dt-bindings: vendor-prefixes: add GOcontroll
GOcontroll produces embedded linux systems and IO modules to use in
these systems, add its prefix.

Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-2-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-13 22:43:15 +00:00
Martin Povišer
f0066c8d1d
ASoC: tas2770: Fix and redo I/V sense TDM slot setting logic
The former code sets the V slot from inside set_bitwidth according to
the bitwidth of the PCM format. That's wrong, since:

 * It overrides the V slot parsed from DT binding.

 * The V slot is set shifted behind the I slot by the length of the PCM
   bitwidth, but the PCM bitwidth has no assured relation to the TDM
   slot width.

Replace the former logic by setting up the I/V sense transmission only
in case of both I/V slots being specified in devicetree, and never
override those values. In case the slots are left unspecified, disable
the transmission completely.

There's an improbable case someone is relying on the old behavior, but
if so, that's a setup that only works by accident, and cannot be sanely
supported going forward. There's no indication anyone is consuming the
I/V sense data up to today, so break the former behavior.

Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-6-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-13 22:39:04 +00:00
Martin Povišer
6553ee024b
ASoC: tas2770: Factor out set_ivsense_slots
Add a new explicit function for the setting of I/V sense TDM slots.

Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-5-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-13 22:39:03 +00:00
Martin Povišer
f8d5f28e3f
ASoC: tas2764: Add control concerning overcurrent events
Add control to expose the option of autoretry behavior on overcurrent
events in the codec.

Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-4-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-13 22:39:02 +00:00
Martin Povišer
ad18392962
ASoC: tas2764: Extend driver to SN012776
SN012776 is a speaker amp chip found in Apple's 2021 laptops. It appears
similar and more-or-less compatible to TAS2764. Extend the TAS2764
driver with some SN012776 specifics and configure the chip assuming
it's in one of the Apple machines.

Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-3-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-13 22:39:01 +00:00
James Calligeros
ce9233937f
ASoC: dt-bindings: tas2770: add compatible for TAS5770L
A variant of TAS2770 known as TAS5770L is found in Apple Silicon Macs.

Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-2-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-13 22:39:00 +00:00
James Calligeros
25a83f870b
ASoC: dt-bindings: tas27xx: add compatible for SN012776
The TI SN012776 is a variant of TAS2764 found in Apple Silicon Macs.
It continues Apple's long-standing policy of getting vendors to
spin out subtly incompatible and Apple-exclusive variants of their
publicly available parts.

Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-1-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-13 22:38:59 +00:00
Kuninori Morimoto
de74ec718e
ASoC: simple-card-utils: Don't use __free(device_node) at graph_util_parse_dai()
commit 419d191810 ("ASoC: simple-card-utils: use __free(device_node) for
device node") uses __free(device_node) for dlc->of_node, but we need to
keep it while driver is in use.

Don't use __free(device_node) in graph_util_parse_dai().

Fixes: 419d191810 ("ASoC: simple-card-utils: use __free(device_node) for device node")
Reported-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn>
Reported-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn>
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://patch.msgid.link/87eczisyhh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-13 22:33:02 +00:00
Gabriel Gonzales
9b1a6c925c arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo
Add support for the Xiaomi Redmi Note 8 based on the SM6125 SoC.

Defined features:
- dmesg output to bootloader preconfigured display
- USB
- eMMC
- SD card
- SMD RPM regulators
- Volume Up, Down and Power buttons

Signed-off-by: Gabriel Gonzales <semfault@disroot.org>
Link: https://lore.kernel.org/r/20250311003353.8250-3-semfault@disroot.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 17:27:07 -05:00
Gabriel Gonzales
4ca8d6f898 dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8
Document the Xiaomi Redmi Note 8 (codenamed ginkgo),
which is based off the SM6125 SoC.

Signed-off-by: Gabriel Gonzales <semfault@disroot.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250311003353.8250-2-semfault@disroot.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 17:27:06 -05:00
Vikash Garodia
37bd695c16 arm64: dts: qcom: sc7280: drop video decoder and encoder nodes
Decoder and encoder nodes are already deprecated from bindings. Update
the venus node to align with bindings. The nodes were deprecated with
commit 459997e899 ("media: dt-bindings: qcom-venus: Deprecate
video-decoder and video-encoder where applicable") and is part of
v6.14-rc1 and onwards.

Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250303-b4-media-v2-1-893651a4b1c7@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 17:12:47 -05:00
Jie Gan
05ed68070d arm64: dts: qcom: sa8775p: Add CTCU and ETR nodes
Add CTCU and ETR nodes in DT to enable related functionalities.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-11-quic_jiegan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 17:12:32 -05:00
Christophe JAILLET
f41658cd08 bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
If qcom_ssc_block_bus_pds_enable() fails, the previous call to
qcom_ssc_block_bus_pds_attach() must be undone, as already done in the
remove function.

In order to do that, move the code related to the power domains management
to the end of the function, in order to avoid many changes in all the error
handling path that would need to go through the new error handling path.

Fixes: 97d485edc1 ("bus: add driver for initializing the SSC bus on (some) qcom SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/1b89ec7438c9a893c09083e8591772c8ad3cb599.1740932040.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 17:11:56 -05:00
Christophe JAILLET
a9ac4ba7dc bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
reg_mpm_sscaon_config[01] are allocated with devm_ioremap_resource(). So,
they will be unmapped automatically by the manage resource framework.

Remove the incorrect explicit iounmap() calls from the remove function.

Fixes: 97d485edc1 ("bus: add driver for initializing the SSC bus on (some) qcom SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/efd06711b126e761a06eb5ef82daf9ad4e116a10.1740932040.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 17:11:56 -05:00
Alexey Klimov
e03ed4ee41 arm64: dts: qcom: qrb5165-rb5: add compressed playback support
Audio DSP supports compressed playback on this SoC. It is required
to add compressed DAI and separate MultimeMedia DAI link to enable this.

Fcplay or cplay tools from tinycompress can playback, say, mp3 files:
fcplay -c 0 -d 3 test.mp3

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lore.kernel.org/r/20250228162308.388818-1-alexey.klimov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 17:10:35 -05:00
Neil Armstrong
2c06e0797c arm64: dts: qcom: sm8650: add PPI interrupt partitions for the ARM PMUs
The PMUs shares the same per-cpu (PPI) interrupt, so declare the proper
interrupt partition maps and use the 4th interrupt cell to pass the
partition phandle for each ARM PMU node.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250228-topic-sm8650-pmu-ppi-partition-v4-2-78cffd35c73d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 17:10:26 -05:00
Neil Armstrong
9ce52e908b arm64: dts: qcom: sm8650: switch to interrupt-cells 4 to add PPI partitions
The ARM PMUs shares the same per-cpu (PPI) interrupt, so we need to switch
to interrupt-cells = <4> in the GIC node to allow adding an interrupt
partition map phandle as the 4th cell value for GIC_PPI interrupts.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250228-topic-sm8650-pmu-ppi-partition-v4-1-78cffd35c73d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 17:10:26 -05:00
Jianfeng Liu
1f04a24175 arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7
HDMI audio is available on the ArmSoM Sige7 HDMI TX port.
Enable it for HDMI0 port.

Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Link: https://lore.kernel.org/r/20250312164056.3998224-1-liujianfeng1994@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-13 23:10:23 +01:00
Jonas Karlman
3a01b5f14a arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C
The Radxa E20C may come with an onboard eMMC (8GB / 16GB / 32GB / 64GB).

Enable support for the onboard eMMC on Radxa E20C.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250305214108.1327208-4-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-13 23:09:34 +01:00
Jonas Karlman
a98cc47f79 arm64: dts: rockchip: Add SDHCI controller for RK3528
The SDHCI controller in Rockchip RK3528 is similar to the one included
in RK3588.

Add device tree node for the SDHCI controller in RK3528.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250305214108.1327208-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-13 23:08:45 +01:00
Rudraksha Gupta
4712dbd5fa ARM: dts: qcom: msm8960: Add thermal sensor (tsens)
Add support for the thermal sensor (tsens) on the MSM8960 by copying and
modifying the relevant nodes from the APQ8064 dtsi. These changes enable
thermal management.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250227-expressatt-tsens-v4-2-d70afa5a1fd0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 17:08:37 -05:00
Paolo Abeni
941defcea7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.14-rc6).

Conflicts:

tools/testing/selftests/drivers/net/ping.py
  75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
  de94e86974 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/

net/core/devmem.c
  a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
  1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/

Adjacent changes:

tools/testing/selftests/net/Makefile
  6f50175cca ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
  2e5584e0f9 ("selftests/net: expand cmsg_ipv6.sh with ipv4")

drivers/net/ethernet/broadcom/bnxt/bnxt.c
  661958552e ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
  fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 23:08:11 +01:00
Abhinaba Rakshit
a3daa844ed arm64: dts: qcom: qcs615: add TRNG node
The qcs615 SoC has a True Random Number Generator, add the node
with the correct compatible set.

Signed-off-by: Abhinaba Rakshit <quic_arakshit@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250228-enable-trng-for-qcs615-v2-2-017aa858576e@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 17:08:04 -05:00
Chen-Yu Tsai
6b68387cf5 arm64: dts: rockchip: Remove bluetooth node from rock-3a
The Bluetooth node described in the device tree is actually on an M.2
slot. What module is present depends on what the end user installed,
and should be left to an overlay.

Remove the existing bluetooth node. This gets rid of bogus timeout
errors.

Fixes: 8cf890aabd ("arm64: dts: rockchip: Add nodes for SDIO/UART Wi-Fi/Bluetooth modules to Radxa Rock 3A")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250220165051.1889055-1-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-13 23:07:46 +01:00
Chukun Pan
8fbb9376f0 arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory
0x0 to 0xf0000000 are SDRAM memory areas where 0x10f000 is located.
So move the SHMEM memory of arm_scmi to the reserved memory node.

Fixes: a3adc0b907 ("arm64: dts: rockchip: add core dtsi for RK3568 SoC")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250308100001.572657-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-13 23:07:46 +01:00
Maulik Shah
778dc0f876 arm64: dts: qcom: sm8750: Fix cluster hierarchy for idle states
SM8750 have two different clusters. cluster0 have CPU 0-5 as child and
cluster1 have CPU 6-7 as child. Each cluster requires its own idle state
and power domain in order to achieve complete domain sleep state.

However only single cluster idle state is added mapping CPU 0-7 to the
same power domain. Fix this by correctly mapping each CPU to respective
cluster power domain and make cluster1 power domain use same domain idle
state as cluster0 since both use same idle state parameters.

Fixes: 068c3d3c83 ("arm64: dts: qcom: Add base SM8750 dtsi")
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250226-sm8750_cluster_idle-v2-1-ef0ac81e242f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 17:05:21 -05:00
Dmitry Baryshkov
bffe01a9b4 arm64: dts: qcom: sm8450: add PCIe EP device nodes
On the Qualcomm SM8450 platform the second PCIe host can be used
either as an RC or as an EP device. Add device node for the PCIe EP.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250221-sar2130p-pci-v3-8-61a0fdfb75b4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 16:45:56 -05:00
Dmitry Baryshkov
84247db00a arm64: dts: qcom: sar2130p: add PCIe EP device nodes
On the Qualcomm AR2 Gen1 platform the second PCIe host can be used
either as an RC or as an EP device. Add device node for the PCIe EP.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250221-sar2130p-pci-v3-7-61a0fdfb75b4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 16:45:56 -05:00
Taniya Das
cdbbc480f4 clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
On the QCM6490 boards, the LPASS firmware controls the complete clock
controller functionalities and associated power domains. However, only
the LPASS resets required to be controlled by the high level OS. Thus,
add support for the resets in the clock driver to enable the Audio SW
driver to assert/deassert the audio resets as needed.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250221-lpass_qcm6490_resets-v5-2-6be0c0949a83@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-13 16:45:22 -05:00