Move cached EDID that takes 512 bytes to the bottom of struct
snps_hdmirx_dev to improve CPU's cache locality of the struct.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
HDMI audio CODEC is unsupported in the current version of the driver.
Support may come later. Remove HDMI CODEC bits that were left out
by accident to keep code consistent.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Depending on IOMMU_DMA is suspicious, since the low-level DMA ops
internals and MSI helpers is provides are not of interest to general
drivers. In practice it mostly seems to be serving as a dependency on
ARM64 here, so do that properly. The venus driver looks like it won't
actually be useful at runtime without the IOMMU API, so add that too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The datasheet recommends 55MHz frequency sampling, with a max of 69 MHz.
(Kudos to Kosta Stefanov for the calculations).
Replace z with a 32 bit uint, and make the range of the variable
explicit.
Found by cocci:
drivers/media/dvb-frontends/tda10048.c:345:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_u64 instead.
Reviewed-by: Kosta Stefanov <costa.stephanoff@gmail.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add check for the return value of clk_enable() to gurantee the success.
Fixes: 002e8f0d59 ("media: stm32-dma2d: STM32 DMA2D driver")
Cc: stable@vger.kernel.org
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
This loop was recently converted to use for_each_of_graph_port() which
automatically does __cleanup__ on the "port" iterator variable. Delete
the calls to of_node_put(port) to avoid a double put bug.
Fixes: 393194cdf1 ("media: xilinx-tpg: use new of_graph functions")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The smsdvb_module_init() returns without checking the retval from
smscore_register_hotplug().
If the smscore_register_hotplug() failed, the module failed to install,
leaving the smsdvb_debugfs not unregistered.
Fixes: 3f6b87cff6 ("[media] siano: allow showing the complete statistics via debugfs")
Cc: stable@vger.kernel.org
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
An of_node_put(i2c_bus) call was immediately used after a pointer check
for an of_find_i2c_adapter_by_node() call in this function implementation.
Thus call such a function only once instead directly before the check.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
An of_node_put(ep) call was immediately used after a return value check
for a v4l2_fwnode_endpoint_parse() call in this function implementation.
Thus call such a function only once instead directly before the check.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Revise the description of MediaTek video decoder to improve wording, fix
typos, simplify diagram, and extend the pipeline architecture used in
newer MediaTek SoCs (MT8186 and MT8188).
Signed-off-by: Fei Shao <fshao@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
On MediaTek platforms with Multimedia MMU (M4U), a multimedia hardware
can be assigned with a local arbiter (LARB) which has a maximum of 32
ports for MediaTek's IOMMU infrastructure. That means there can be at
most 32 items in the iommus property in theory.
Instead of relaxing the max item count every time a newly introduced
device tree hits the limit, bump the number to 32 as an one-time effort.
On the other hand, all existing and foreseeable JPEG decoder nodes at
this point have at least 2 IOMMUs, so set minItems to 2 accordingly.
Signed-off-by: Fei Shao <fshao@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In v4l2_detect_gtf(), it seems safer to cast the 32-bit image_width
variable to the 64-bit type u64 before multiplying to avoid
a possible overflow. The resulting object code even seems to
look better, at least on x86_64.
Found by Linux Verification Center (linuxtesting.org) with Svace.
[Sergey: rewrote the patch subject/descripition]
Fixes: c9bc9f5075 ("[media] v4l2-dv-timings: fix overflow in gtf timings calculation")
Cc: stable@vger.kernel.org
Signed-off-by: Karina Yankevich <k.yankevich@omp.ru>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The arguments to rga_lookup_draw_pos() are passed in the wrong order,
rotate mode should be before mirror mode.
Fixes: 558c248f93 ("media: rockchip: rga: split src and dst buffer setup")
Cc: stable@vger.kernel.org
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Returned buffers shouldn't contain V4L2_FIELD_ANY as field. Set the
field to V4L2_FIELD_NONE, if it isn't set.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Fix checkpatch error "ERROR: that open brace { should be on the previous
line" in ia_css_sdis.host.c:253 and :258.
Signed-off-by: Santiago Ruano Rincón <santiagorr@riseup.net>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Fix checkpatch error "ERROR: open brace '{' following function
definitions go on the next line" in sdis_1.0/ia_css_sdis.host.c:239.
Signed-off-by: Santiago Ruano Rincón <santiagorr@riseup.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Many functions operate on data structures that are read only, both in
the implementation and by design. Mark them as const to increase
readability and avoid future mistakes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[Why]
There are several ns_to_ktime() calls that require using nanoseconds. It is
better to replace them with us_to_ktime() to make code clear, getting rid
of multiplication by 1000.
Also the timer function code may have an integer wrap-around issue. Since
both tx_custom_low_usecs and tx_custom_high_usecs can be set to up to
9999999 from the user space via cec_pin_error_inj_parse_line(), this may
cause usecs to be overflowed when adap->monitor_pin_cnt is zero and usecs
is multiplied by 1000.
[How]
Take advantage of using an appropriate helper func us_to_ktime() instead of
ns_to_ktime() to improve readability and to make the code clearer. And this
also mitigates possible integer wrap-arounds when usecs value is too large
and it is multiplied by 1000.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Lontium LT9611UXE is a HDMI to MIPI CSI-2 bridge. The device supports
modes up to 4k@60fps, obtains the video information and switches the
current mode once the video signal changes.
Signed-off-by: Dongcheng Yan <dongcheng.yan@intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fix smatch warning: missing error code 'ret']
[hverkuil: fix coccinelle IRQF_ONESHOT warning]
This adds entries for new and missing SoCs in the MediaTek SoCInfo
driver (MT8370AV/AZA, MT8390AV/AZA) and an extra entry for a new
revision of the MT8395AV/ZA SoC.
The MediaTek SoCInfo driver also gets its SoC attribute information
restructured: now the family, machine and soc_id fields are correctly
populated.
MT8188 gains support for the secondary Display Parallel Interface
used for HDMI, and for the Display Stream Compression component
routing through mmsys and mutex tables.
All of the MMSYS drivers get an important overhaul: it was found that,
in multiple cases, the tables contained wrong mask/value pairs, hence
those were doing either nothing or breaking routings.
The mmsys tables were converted to use a newly introduced macro that
will perform a compile time check, making sure that each table entry's
value fits in the declared register mask.
Thanks to the new macro, multiple MediaTek SoCs got multiple fixes in
their MMSYS tables, addressing issues that were severely impacting the
functionality of the display controller pipelines.
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZ8mA2CgcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4Vg4A/RwP
qv6tZhnc0Y9fSygMAoSNhNcD62WBvxGI3VmmomS7AP9YmfRWBoiawv5PzT7x9myN
9dauqi3lC7AjUhZejNjvBQ==
=YKqm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmfJy68ACgkQYKtH/8kJ
Uiey7w/+Pu25ynRxg3F6GLUwsBl6gQk5nxsuRsoVUcU80RtAIE6A8mmjLrTbrY4R
wyaNN9JnVE7qN+MXN6hZZ6uYktr3TYGPTR/V9gO4Uc4RmPxxDJltypf4nMfr6q1Q
e4qCScDpgT3728vzEhQxL1vGjOOZPx2CImVlt0q4RM0dDkLolsOW5L1MXGGt0Vb+
OX6QWVeeacIXcMFKYsXI9y52B3akv6bERkPMgnojT9FSoANT2A4R8H5RgtDyY85x
c5nVqWBqylGYzGAcaUSWc4xTS6eTaGj7ua3rd1X3DLeeHhkXbLbrdQQrkRNNPWiY
hzNdHi19Pz8u8T2bGHaJ1nLJDepLHh13hx3OtJ2h2uxcjUQ7GSKvkOCILVv0E0y2
upd6TLXqyQTpk8JwmWt3jQ91m7sfCqSzwq2X9xATFs7Fp+jVGpTA6cQgLWwxKa9+
r9FbKpxToiPAYvc/v6CYC8IlXIy+NWn2UjSBlltB2mQURHnWk2TuTvsCcllFrG+S
tDQN9+auNDMLDP+TIbWNXM172bVhH3YEP5ogbXlnHX00FA11fkLl46RzfltvNcOO
5F3kWv5NnIvfG5wjHpftBCFp6Ox6dmJgkmUOJ6l8IoYrHTcrNUxMWBqi+cP/4gRc
yVUBxqOg5C54JTd6R5yhTFSLRa3fmpeR7Q+WyIAKtCTHB701ETk=
=Uz0f
-----END PGP SIGNATURE-----
Merge tag 'mtk-soc-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek driver updates for v6.15
This adds entries for new and missing SoCs in the MediaTek SoCInfo
driver (MT8370AV/AZA, MT8390AV/AZA) and an extra entry for a new
revision of the MT8395AV/ZA SoC.
The MediaTek SoCInfo driver also gets its SoC attribute information
restructured: now the family, machine and soc_id fields are correctly
populated.
MT8188 gains support for the secondary Display Parallel Interface
used for HDMI, and for the Display Stream Compression component
routing through mmsys and mutex tables.
All of the MMSYS drivers get an important overhaul: it was found that,
in multiple cases, the tables contained wrong mask/value pairs, hence
those were doing either nothing or breaking routings.
The mmsys tables were converted to use a newly introduced macro that
will perform a compile time check, making sure that each table entry's
value fits in the declared register mask.
Thanks to the new macro, multiple MediaTek SoCs got multiple fixes in
their MMSYS tables, addressing issues that were severely impacting the
functionality of the display controller pipelines.
* tag 'mtk-soc-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
soc: mediatek: mt8167-mmsys: Fix missing regval in all entries
soc: mediatek: mt8188-mmsys: Migrate to MMSYS_ROUTE() macro
soc: mediatek: mtk-mmsys: Add compile time check for mmsys routes
soc: mediatek: mtk-mmsys: Fix MT8188 VDO1 DPI1 output selection
soc: mediatek: mtk-mutex: Add DPI1 SOF/EOF to MT8188 mutex tables
soc: mediatek: mtk-socinfo: Avoid using machine attribute in SoC detection log
soc: mediatek: mtk-socinfo: Add entry for MT8390AV/AZA Genio 700
soc: mediatek: mtk-socinfo: Add entry for MT8370AV/AZA Genio 510
soc: mediatek: mtk-socinfo: Restructure SoC attribute information
Link: https://lore.kernel.org/r/20250306113540.148342-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The scmi_common_fastchannel_db_ring() function calls either ioread64()
or ioread64_hi_lo() depending on whether it is compiler for 32-bit
or 64-bit architectures.
The same logic is used to define ioread64() itself in the
linux/io-64-nonatomic-hi-lo.h header file, so the special case
is not really needed.
The behavior here should not change at all.
Fixes: 6f9ea4dabd ("firmware: arm_scmi: Generalize the fast channel support")
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250304144346.1025658-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This update primarily focuses on FF-A framework notification support
along with other improvements, including UUID handling enhancements
and various fixes.
1. FF-A framework notification upport
- Adds support for multiple UUIDs per partition to register individual
SRI callbacks.
- Handles Rx buffer full framework notifications and provides a general
interface for future extensions.
2. Improved multiple UUID/services per-partition handling
- Adds support for UUID passing in FFA_MSG_SEND2, improving multiple
UUID/service support in the driver.
- Introduces a helper function to check whether a partition can
receive REQUEST2 messages.
3. Partition handling generic improvements
- Implements device unregistration for better partition cleanup.
- Improves handling of the host partition presence in partition info.
4. FF-A version updates
- Upgrades the driver version to FF-A v1.2.
- Rejects major versions higher than the driver version as incompatible.
5. Big-Endian support fixes
- Fixes big-endian issues in:
__ffa_partition_info_regs_get()
__ffa_partition_info_get()
- Big-endian support is still incomplete, and only these changes can
be verified without additional application/testing updates at the
moment. We can discover all the partitions correctly with big-endian
kernel now.
6. Miscellaneous fixes
- Fixes function prototype misalignments in: sync_send_receive{,2}
- Adds explicit type casting for return values from: FFA_VERSION
and NOTIFICATION_INFO_GET
- Corrects vCPU list parsing in ffa_notification_info_get().
7. UUID management in the driver and DMA mask updates
- Replaces UUID buffer with the standard UUID format in ffa_partition_info
structure.
- Fixes a typo in some FF-A bus macros.
- Sets dma_mask for FF-A devices.
In short, this update enhances notification handling, UUID support, and
overall robustness of the FF-A driver while addressing multiple fixes
and cleanups.
-----BEGIN PGP SIGNATURE-----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=qX1J
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmfJyysACgkQYKtH/8kJ
UifldBAAmSmOhxSHMSW9D5vtJW33XPsHf3zjcDjHHVNoF4AHZDWpvN2xTbBRhe1c
iPf4R1A+Otfa0BfxTFyG5gMIMfyRGjSmkveDVlnnrn+dLafc2AyiHZsOAaz6PvSN
zG3FFbMSPKBqNVy2CEbDDb/HfOtodzIpiqcHDO/kBSlrMz7hNn81TsOQ+BqvMjNE
d7yddFvdEZZYGphHD6Q/cOcrFfuWNhfYkn130sORg8eolIhp+SsXXBKlOxgjBtRX
TbRW6FUCE+aEZtyrzOpsopI9zqXsgPy7h6BgnlDc3INB+1N1re7zQlvh4Jsqn4wh
DmhAhrPLf8NzkUuIIRUDPBoNRwIP+1MvGAvKWq8FyMh2hvZ+ARW87FxiABEiwCbc
/N1waQrapdLB695cKAEDCaBrgN+opxWOx7P6X3tCRAirIRpEtNaLJ/Awd4lfDoyK
qacIjsw+KQy9TGi1k/TPslVZ5E2wiVqmlEJjyC3KchVK7AIDDFQ480C7IC9gnJPZ
TVlyUGWN0iHK8Aer0AvO0lV4z5E0fL6ovJhPX/8/3uLaPNFKXs5+m5+0i0RJPYw9
0phlX7CyXSlm9IMmPQv2BgPI/+dKifRA0mtoDvtfQe6gbpihnXYcm0+90jVaa/bE
DxaLozWLoQqWc22nQCDFJ6XUK5WC11bRr5KYFg07FqSYFEE/JA0=
=Phyc
-----END PGP SIGNATURE-----
Merge tag 'ffa-updates-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A updates for v6.15
This update primarily focuses on FF-A framework notification support
along with other improvements, including UUID handling enhancements
and various fixes.
1. FF-A framework notification upport
- Adds support for multiple UUIDs per partition to register individual
SRI callbacks.
- Handles Rx buffer full framework notifications and provides a general
interface for future extensions.
2. Improved multiple UUID/services per-partition handling
- Adds support for UUID passing in FFA_MSG_SEND2, improving multiple
UUID/service support in the driver.
- Introduces a helper function to check whether a partition can
receive REQUEST2 messages.
3. Partition handling generic improvements
- Implements device unregistration for better partition cleanup.
- Improves handling of the host partition presence in partition info.
4. FF-A version updates
- Upgrades the driver version to FF-A v1.2.
- Rejects major versions higher than the driver version as incompatible.
5. Big-Endian support fixes
- Fixes big-endian issues in:
__ffa_partition_info_regs_get()
__ffa_partition_info_get()
- Big-endian support is still incomplete, and only these changes can
be verified without additional application/testing updates at the
moment. We can discover all the partitions correctly with big-endian
kernel now.
6. Miscellaneous fixes
- Fixes function prototype misalignments in: sync_send_receive{,2}
- Adds explicit type casting for return values from: FFA_VERSION
and NOTIFICATION_INFO_GET
- Corrects vCPU list parsing in ffa_notification_info_get().
7. UUID management in the driver and DMA mask updates
- Replaces UUID buffer with the standard UUID format in ffa_partition_info
structure.
- Fixes a typo in some FF-A bus macros.
- Sets dma_mask for FF-A devices.
In short, this update enhances notification handling, UUID support, and
overall robustness of the FF-A driver while addressing multiple fixes
and cleanups.
* tag 'ffa-updates-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (23 commits)
firmware: arm_ffa: Set dma_mask for ffa devices
firmware: arm_ffa: Skip the first/partition ID when parsing vCPU list
firmware: arm_ffa: Explicitly cast return value from NOTIFICATION_INFO_GET
firmware: arm_ffa: Explicitly cast return value from FFA_VERSION before comparison
firmware: arm_ffa: Handle ffa_notification_get correctly at virtual FF-A instance
firmware: arm_ffa: Allow multiple UUIDs per partition to register SRI callback
firmware: arm_ffa: Add support for handling framework notifications
firmware: arm_ffa: Add support for {un,}registration of framework notifications
firmware: arm_ffa: Stash ffa_device instead of notify_type in notifier_cb_info
firmware: arm_ffa: Refactoring to prepare for framework notification support
firmware: arm_ffa: Remove unnecessary declaration of ffa_partitions_cleanup()
firmware: arm_ffa: Reject higher major version as incompatible
firmware: arm_ffa: Upgrade FF-A version to v1.2 in the driver
firmware: arm_ffa: Add support for passing UUID in FFA_MSG_SEND2
firmware: arm_ffa: Helper to check if a partition can receive REQUEST2 messages
firmware: arm_ffa: Unregister the FF-A devices when cleaning up the partitions
firmware: arm_ffa: Handle the presence of host partition in the partition info
firmware: arm_ffa: Refactor addition of partition information into XArray
firmware: arm_ffa: Fix big-endian support in __ffa_partition_info_regs_get()
firmware: arm_ffa: Fix big-endian support in __ffa_partition_info_get()
...
Link: https://lore.kernel.org/r/20250304105928.432997-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Couple of updates around the flexibility in SCMI device names and
addition of name, protocol id attributes and modalias for SCMI
devices in the sysfs.
Currently, in the scmi_protocol_device_request() function, SCMI device
names ust be unique across all protocols. However, this constraint is
being relaxed, allowing devices in different protocols to share the
same name. The change aims to provide more flexibility in naming devices
across various protocols.
Two attributes: name and protocol ID is being added to the SCMI device
in the sysfs along with the support for the modalias. These attributes
aim to enhance device identification and management.
-----BEGIN PGP SIGNATURE-----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=DMuT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=cVvD
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.15
Couple of updates around the flexibility in SCMI device names and
addition of name, protocol id attributes and modalias for SCMI
devices in the sysfs.
Currently, in the scmi_protocol_device_request() function, SCMI device
names ust be unique across all protocols. However, this constraint is
being relaxed, allowing devices in different protocols to share the
same name. The change aims to provide more flexibility in naming devices
across various protocols.
Two attributes: name and protocol ID is being added to the SCMI device
in the sysfs along with the support for the modalias. These attributes
aim to enhance device identification and management.
* tag 'scmi-updates-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Emit modalias for SCMI devices
firmware: arm_scmi: Add name and protocol id attributes
firmware: arm_scmi: Relax duplicate name constraint across protocol ids
Link: https://lore.kernel.org/r/20250304105915.432967-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Just a single update introducing the support for the optional SOC_ID
name string from the Arm SMCCC v1.6 specification.
If the SOC_ID name string is implemented, the machine field of the SoC
Device Attributes will reflect it.
The original intent of SOC_ID was to provide a JEP-106 code for the SiP
and the SoC revision to uniquely identify the SoC. However, there has
been a request to add this optional name so that SoC firmware can
directly provide the SoC name to the OS.
This change avoids the need for frequent updates to various tools that
would otherwise require maintaining hardcoded model/machine name tables
for new SoCs.
-----BEGIN PGP SIGNATURE-----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=/iKV
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=tny0
-----END PGP SIGNATURE-----
Merge tag 'smccc-update-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SMCCC update for v6.15
Just a single update introducing the support for the optional SOC_ID
name string from the Arm SMCCC v1.6 specification.
If the SOC_ID name string is implemented, the machine field of the SoC
Device Attributes will reflect it.
The original intent of SOC_ID was to provide a JEP-106 code for the SiP
and the SoC revision to uniquely identify the SoC. However, there has
been a request to add this optional name so that SoC firmware can
directly provide the SoC name to the OS.
This change avoids the need for frequent updates to various tools that
would otherwise require maintaining hardcoded model/machine name tables
for new SoCs.
* tag 'smccc-update-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: smccc: Support optional Arm SMCCC SOC_ID name
Link: https://lore.kernel.org/r/20250304105845.432813-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Additional logging for errors
- A few minor improvements and bugfixes required for drivers that are
yet to be upstreamed
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS3vz815OHsEaWy0u9EEX0kKnUe6QUCZ8RBIAAKCRBEEX0kKnUe
6emXAQCKv1KH1fh1U3mUmqKFj6GNd3Ezq5uQqSwQi5gU+AgiHwD6A+vgMJ322tZ2
aHxf2QfdO+RRiJulac1kcvhkBDnp2AI=
=05ee
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QUAr
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-rtkit-6.15' of https://github.com/AsahiLinux/linux into soc/drivers
Apple SoC RTKit IPC library updates for 6.15:
- Additional logging for errors
- A few minor improvements and bugfixes required for drivers that are
yet to be upstreamed
* tag 'asahi-soc-rtkit-6.15' of https://github.com/AsahiLinux/linux:
soc: apple: rtkit: Cut syslog messages after the first '\0'
soc: apple: rtkit: Use high prio work queue
soc: apple: rtkit: Implement OSLog buffers properly
soc: apple: rtkit: Add and use PWR_STATE_INIT instead of _ON
soc: apple: rtkit: Fix use-after-free in apple_rtkit_crashlog_rx()
soc: apple: rtkit: Pass the crashlog to the crashed() callback
soc: apple: rtkit: Check & log more failures
Link: https://lore.kernel.org/r/20250302113842.58092-1-sven@svenpeter.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add a driver for the System Controller on RZ/G3S, RZ/G3E, and
RZ/V2H.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ7ilRQAKCRCKwlD9ZEnx
cLmpAP0ZQtRGAQkXR7ne3GpIXEuJ3petf+SnNlzZEQIpoeTyRgEAm7NcDY6B/5hI
HFlAQnHnpHOirRiCnmBobrRJDlZIDQU=
=P4me
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=aT8E
-----END PGP SIGNATURE-----
Merge tag 'renesas-drivers-for-v6.15-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers
Renesas driver updates for v6.15
- Add a driver for the System Controller on RZ/G3S, RZ/G3E, and
RZ/V2H.
* tag 'renesas-drivers-for-v6.15-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: r9a09g057-sys: Add a callback to print SoC-specific extra features
soc: renesas: rz-sysc: Move RZ/V2H SoC detection to the SYS driver
soc: renesas: rz-sysc: Add support for RZ/G3E family
soc: renesas: rz-sysc: Move RZ/G3S SoC detection to the SYSC driver
soc: renesas: Add SYSC driver for Renesas RZ family
Link: https://lore.kernel.org/r/cover.1740156741.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Resources should be released only after all threads that utilize them
have been destroyed.
This commit ensures that resources are not released prematurely by waiting
for the associated workqueue to complete before deallocating them.
Cc: stable <stable@kernel.org>
Fixes: b9aa02ca39 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250305111739.1489003-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When used on Huawei hisi platforms, Prolific Mass Storage Card Reader
which the VID:PID is in 067b:2731 might fail to enumerate at boot time
and doesn't work well with LPM enabled, combination quirks:
USB_QUIRK_DELAY_INIT + USB_QUIRK_NO_LPM
fixed the problems.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250304070757.139473-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Test the fences in the private dma_resv object instead of the pointer to
a potentially shared dma_resv object.
This only matters for imported BOs with an SG table since those don't
get their dma_resv pointer replaced on release.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129152849.15777-1-christian.koenig@amd.com
This adds new SoCs and new machines, other than improving support for
currently supported ones.
In particular, for SoCs:
- Airoha EN7581 gets support for its SCU clock controller, SPI NAND,
hardware RNG, pinctrl, and i2c controllers;
- MediaTek MT8365 SoC gets support for all of its Display Controller
components;
- MediaTek Genio 510 MT8370 - a lower binned variant of Genio 700
MT8390 (which, in turn, is the same as MT8188) - is introduced;
- MT8188 gets support for more Display Controller components (DSC
and MERGE), for the tertiary MSDC (eMMC/SD/SDIO) controller, and
for the MTU3 USB DRD controllers;
- MT8195 and MT8188 both get migrated to the new OF Graph used for
defining a pipeline for the Display Controller components (as
this was previously hardcoded per-board in the drm driver, ugh!);
..and for boards:
- Google Kukui (MT8183) is switched to Elan touchscreen driver
instead of hid-over-i2c to fix probe failures in some cases;
- Google Cherry (MT8195) and Geralt (MT8188) Chromebooks get
migrated to using OF Graph for defining their board specific
part of the display pipeline;
- MediaTek Genio 350 (mt8365) EVK board adds support for HDMI output
through the iTE IT66121 chip, and for DSI output to the Startek
KD070FHFID015 display;
- MediaTek Genio 510 EVK board is introduced with a common devicetree
between mt8390 and mt8370 (Genio 700 and Genio 510) EVKs;
- MediaTek Genio 700 (and 510) EVKs get support for their integrated
dual Digital Microphones, for their RichTek RT1715 USB Type-C
Controller with USB-PD capability, the iTE IT5205 Alternate Mode
Passive MUX (USB3.1/DP1.4), and for USB Gadget/Host switching
through the MTU3 DRD Controller, other than for USB in general;
- MediaTek Genio 1200 EVK gets support for its MediaTek MT6360 PMIC
integrated Type-C Controller, and the IT5205 MUX;
- Radxa NIO-12L gets its DSI display pipeline preconfigured and also
the introduction of a devicetree overlay for the official Radxa
8HD DSI panel, enabling display output over DSI.
And fixes/cleanups:
- MT8173 gets fixes for bindings validation: PMIC node drops the
unnecessary address/size cells, disp-pwm gets its compatibles
list fixed (as mt6595 was not expected there), and some nodes
got the right name (clock controllers were disguides as power
controllers, and intpol was changed to interrupt-controller);
- MT8188-based (MT8390) Genio boards get a fix for duplicated
regulator name;
- MT6359 PMIC gets fixes for audio-codec node validation.
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZ8l9IigcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4dPUA/jkq
/5zwPLVsoZ77s+N1CI3uwnp4AonPfmhKtLXjHYC9AP9wcpnYdpG74W+RLEdtsnpx
SJhoWFWu6h3byujvuQwkAQ==
=zQ+t
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7ufM
-----END PGP SIGNATURE-----
Merge tag 'mtk-dts64-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DTS updates for v6.15
This adds new SoCs and new machines, other than improving support for
currently supported ones.
In particular, for SoCs:
- Airoha EN7581 gets support for its SCU clock controller, SPI NAND,
hardware RNG, pinctrl, and i2c controllers;
- MediaTek MT8365 SoC gets support for all of its Display Controller
components;
- MediaTek Genio 510 MT8370 - a lower binned variant of Genio 700
MT8390 (which, in turn, is the same as MT8188) - is introduced;
- MT8188 gets support for more Display Controller components (DSC
and MERGE), for the tertiary MSDC (eMMC/SD/SDIO) controller, and
for the MTU3 USB DRD controllers;
- MT8195 and MT8188 both get migrated to the new OF Graph used for
defining a pipeline for the Display Controller components (as
this was previously hardcoded per-board in the drm driver, ugh!);
..and for boards:
- Google Kukui (MT8183) is switched to Elan touchscreen driver
instead of hid-over-i2c to fix probe failures in some cases;
- Google Cherry (MT8195) and Geralt (MT8188) Chromebooks get
migrated to using OF Graph for defining their board specific
part of the display pipeline;
- MediaTek Genio 350 (mt8365) EVK board adds support for HDMI output
through the iTE IT66121 chip, and for DSI output to the Startek
KD070FHFID015 display;
- MediaTek Genio 510 EVK board is introduced with a common devicetree
between mt8390 and mt8370 (Genio 700 and Genio 510) EVKs;
- MediaTek Genio 700 (and 510) EVKs get support for their integrated
dual Digital Microphones, for their RichTek RT1715 USB Type-C
Controller with USB-PD capability, the iTE IT5205 Alternate Mode
Passive MUX (USB3.1/DP1.4), and for USB Gadget/Host switching
through the MTU3 DRD Controller, other than for USB in general;
- MediaTek Genio 1200 EVK gets support for its MediaTek MT6360 PMIC
integrated Type-C Controller, and the IT5205 MUX;
- Radxa NIO-12L gets its DSI display pipeline preconfigured and also
the introduction of a devicetree overlay for the official Radxa
8HD DSI panel, enabling display output over DSI.
And fixes/cleanups:
- MT8173 gets fixes for bindings validation: PMIC node drops the
unnecessary address/size cells, disp-pwm gets its compatibles
list fixed (as mt6595 was not expected there), and some nodes
got the right name (clock controllers were disguides as power
controllers, and intpol was changed to interrupt-controller);
- MT8188-based (MT8390) Genio boards get a fix for duplicated
regulator name;
- MT6359 PMIC gets fixes for audio-codec node validation.
* tag 'mtk-dts64-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (35 commits)
arm64: dts: mediatek: mt8395-radxa-nio-12l: Add Radxa 8 HD panel
arm64: dts: mediatek: mt8395-nio-12l: Prepare MIPI DSI port
arm64: dts: mediatek: mt8390-genio-common: Add delay codec for DMIC
arm64: dts: mediatek: mt8390-genio-common: Add routes for DMIC
arm64: dts: mediatek: mt8395-nio-12l: Preconfigure DSI0 pipeline
arm64: mediatek: mt8195-cherry: Add graph for eDP and DP displays
arm64: dts: mediatek: mt8195: Add base display controller graph
arm64: dts: airoha: en7581: Fix clock-controller address
arm64: dts: airoha: en7581: Add more nodes to EN7581 SoC evaluation board
arm64: dts: mediatek: mt8390-genio-common: Configure touch vreg pins
arm64: dts: mediatek: mt8188-geralt: Add graph for DSI and DP displays
arm64: dts: mediatek: mt8188: Add base display controller graph
arm64: dts: mediatek: mt8390-genio-700: Add USB, TypeC Controller, MUX
arm64: dts: mediatek: mt8188: Add MTU3 nodes and correctly describe USB
dt-bindings: usb: mediatek,mtk-xhci: Add port for SuperSpeed EP
arm64: dts: mediatek: mt8395-genio-1200-evk: add support for TCPC port
dt-bindings: usb: mtu3: Add ports property
arm64: dts: mediatek: mt8390-genio-common: Fix duplicated regulator name
arm64: dts: mediatek: mt8183: Switch to Elan touchscreen driver
arm64: dts: mediatek: mt6359: fix dtbs_check error for audio-codec
...
Link: https://lore.kernel.org/r/20250306113540.148342-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove "regulator-ramp-delay-scale" property which is both unused in the
kernel and undocumented. Most likely they are leftovers from downstream.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250305224952.2995841-2-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Unplugging a USB3.0 webcam from Etron hosts while streaming results
in errors like this:
[ 2.646387] xhci_hcd 0000:03:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 18 comp_code 13
[ 2.646446] xhci_hcd 0000:03:00.0: Looking for event-dma 000000002fdf8630 trb-start 000000002fdf8640 trb-end 000000002fdf8650
[ 2.646560] xhci_hcd 0000:03:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 18 comp_code 13
[ 2.646568] xhci_hcd 0000:03:00.0: Looking for event-dma 000000002fdf8660 trb-start 000000002fdf8670 trb-end 000000002fdf8670
Etron xHC generates two transfer events for the TRB if an error is
detected while processing the last TRB of an isoc TD.
The first event can be any sort of error (like USB Transaction or
Babble Detected, etc), and the final event is Success.
The xHCI driver will handle the TD after the first event and remove it
from its internal list, and then print an "Transfer event TRB DMA ptr
not part of current TD" error message after the final event.
Commit 5372c65e13 ("xhci: process isoc TD properly when there was a
transaction error mid TD.") is designed to address isoc transaction
errors, but unfortunately it doesn't account for this scenario.
This issue is similar to the XHCI_SPURIOUS_SUCCESS case where a success
event follows a 'short transfer' event, but the TD the event points to
is already given back.
Expand the spurious success 'short transfer' event handling to cover
the spurious success after error on Etron hosts.
Kuangyi Chiang reported this issue and submitted a different solution
based on using error_mid_td. This commit message is mostly taken
from that patch.
Reported-by: Kuangyi Chiang <ki.chiang65@gmail.com>
Closes: https://lore.kernel.org/linux-usb/20241028025337.6372-6-ki.chiang65@gmail.com/
Tested-by: Kuangyi Chiang <ki.chiang65@gmail.com>
Tested-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-16-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extract a block of code copied from inc_enq() into a separate function
and call it from inc_enq() and the other function which used this code.
Remove the pointless 'next' variable which only aliases ring->enqueue.
Note: I don't know if any 0.95 xHC ever reached series production, but
"AMD 0.96 host" appears to be the "Llano" family APU. Example dmesg at
https://linux-hardware.org/?probe=79d5cfd4fd&log=dmesg
pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
hcc params 0x014042c3 hci version 0x96 quirks 0x0000000000000608
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-15-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two clearly different specimens of NEC uPD720200 (one with start/stop
bug, one without) were seen to cause IOMMU faults after some Missed
Service Errors. Faulting address is immediately after a transfer ring
segment and patched dynamic debug messages revealed that the MSE was
received when waiting for a TD near the end of that segment:
[ 1.041954] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ffa08fe0
[ 1.042120] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09000 flags=0x0000]
[ 1.042146] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09040 flags=0x0000]
It gets even funnier if the next page is a ring segment accessible to
the HC. Below, it reports MSE in segment at ff1e8000, plows through a
zero-filled page at ff1e9000 and starts reporting events for TRBs in
page at ff1ea000 every microframe, instead of jumping to seg ff1e6000.
[ 7.041671] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.041999] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.042011] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042028] xhci_hcd: All TDs skipped for slot 1 ep 2. Clear skip flag.
[ 7.042134] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042138] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042144] xhci_hcd: Looking for event-dma 00000000ff1ea040 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.042259] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042262] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042266] xhci_hcd: Looking for event-dma 00000000ff1ea050 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
At some point completion events change from Isoch Buffer Overrun to
Short Packet and the HC finally finds cycle bit mismatch in ff1ec000.
[ 7.098130] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098132] xhci_hcd: Looking for event-dma 00000000ff1ecc50 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098254] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098256] xhci_hcd: Looking for event-dma 00000000ff1ecc60 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098379] xhci_hcd: Overrun event on slot 1 ep 2
It's possible that data from the isochronous device were written to
random buffers of pending TDs on other endpoints (either IN or OUT),
other devices or even other HCs in the same IOMMU domain.
Lastly, an error from a different USB device on another HC. Was it
caused by the above? I don't know, but it may have been. The disk
was working without any other issues and generated PCIe traffic to
starve the NEC of upstream BW and trigger those MSEs. The two HCs
shared one x1 slot by means of a commercial "PCIe splitter" board.
[ 7.162604] usb 10-2: reset SuperSpeed USB device number 3 using xhci_hcd
[ 7.178990] sd 9:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s
[ 7.179001] sd 9:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 04 02 ae 00 00 02 00 00
[ 7.179004] I/O error, dev sdb, sector 67284480 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0
Fortunately, it appears that this ridiculous bug is avoided by setting
the chain bit of Link TRBs on isochronous rings. Other ancient HCs are
known which also expect the bit to be set and they ignore Link TRBs if
it's not. Reportedly, 0.95 spec guaranteed that the bit is set.
The bandwidth-starved NEC HC running a 32KB/uframe UVC endpoint reports
tens of MSEs per second and runs into the bug within seconds. Chaining
Link TRBs allows the same workload to run for many minutes, many times.
No negative side effects seen in UVC recording and UAC playback with a
few devices at full speed, high speed and SuperSpeed.
The problem doesn't reproduce on the newer Renesas uPD720201/uPD720202
and on old Etron EJ168 and VIA VL805 (but the VL805 has other bug).
[shorten line length of log snippets in commit messge -Mathias]
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-14-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ensure that an endpoint halted due to device STALL is not
restarted before a Clear_Feature(ENDPOINT_HALT) request is sent to
the device.
The host side of the endpoint may otherwise be started early by the
'Set TR Deq' command completion handler which is called if dequeue
is moved past a cancelled or halted TD.
Prevent this with a new flag set for bulk and interrupt endpoints
when a Stall Error is received. Clear it in hcd->endpoint_reset()
which is called after Clear_Feature(ENDPOINT_HALT) is sent.
Also add a debug message if a class driver queues a new URB after the
STALL. Note that class driver might not be aware of the STALL
yet when it submits the URB as URBs are given back in BH.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-13-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function trb_in_td() currently includes debug capabilities that are
triggered when its debug argument is set to true. The only consumer of
these debug capabilities is handle_tx_event(), which calls trb_in_td()
twice, once for its primary functionality and a second time solely for
debugging purposes if the first call returns 'NULL'.
This approach is inefficient and can lead to confusion, as trb_in_td()
executes the same code with identical arguments twice, differing only in
the debug output during the second execution.
To enhance clarity and efficiency, move the debug capabilities out of
trb_in_td() and integrates them directly into handle_tx_event().
This change reduces the argument count of trb_in_td() and ensures that
debug steps are executed only when necessary, streamlining the function's
operation.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-12-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Relocate trb_in_td() and marks it as static, as it's exclusively utilized
in xhci-ring.c. This adjustment lays the groundwork for future rework of
the function.
The function's logic remains unchanged; only its access specifier is
altered to static and a redundant "else" is removed on line 325
(due to checkpatch.pl complaining).
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-11-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current xHCI driver does not validate whether a page size of 4096
bytes is supported. Address the issue by setting the page size to the
value supported by the xHCI controller, as read from the Page Size
register. In the event of an unexpected value; default to a 4K page size.
Additionally, this commit removes unnecessary debug messages and instead
prints the supported and used page size once.
The xHCI controller supports page sizes of (2^{(n+12)}) bytes, where 'n'
is the Page Size Bit. Only one page size is supported, with a maximum
page size of 128 KB.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ffs() function returns the index of the first set bit, starting from 1.
If no bits are set, it returns zero. This behavior causes an off-by-one
page size in the debug message, as the page size calculation [1]
is zero-based, while ffs() is one-based.
Fix this by subtracting one from the result of ffs(). Note that since
variable 'val' is unsigned, subtracting one from zero will result in the
maximum unsigned integer value. Consequently, the condition 'if (val < 16)'
will still function correctly.
[1], Page size: (2^(n+12)), where 'n' is the set page size bit.
Fixes: 81720ec532 ("usb: host: xhci: use ffs() in xhci_mem_init()")
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If skipping is deferred to events other than Missed Service Error itsef,
it means we are running on an xHCI 1.0 host and don't know how many TDs
were missed until we reach some ordinary transfer completion event.
And in case of ring xrun, we can't know where the xrun happened either.
If we skip all pending TDs, we may prematurely give back TDs added after
the xrun had occurred, risking data loss or buffer UAF by the xHC.
If we skip none, a driver may become confused and stop working when all
its URBs are missed and appear to be "in flight" forever.
Skip exactly one TD on each xrun event - the first one that was missed,
as we can now be sure that the HC has finished processing it. Provided
that one more TD is queued before any subsequent doorbell ring, it will
become safe to skip another TD by the time we get an xrun again.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xHCI spec rev. 1.0 allowed the TRB pointer of Missed Service events
to be NULL. Having no idea which of the queued TDs were missed and
which are waiting, we can only set a flag to skip missed TDs later.
But HCs are also allowed to give us pointer to the last missed TRB,
and this became mandatory in spec rev. 1.1 and later.
Use this pointer, if available, to immediately skip all missed TDs.
This reduces latency and risk of skipping-related bugs, because we
can now leave the skip flag cleared for future events.
Handle Missed Service Error events as 'error mid TD', if applicable,
because rev. 1.0 spec excplicitly says so in notes to 4.10.3.2 and
later revs in 4.10.3.2 and 4.11.2.5.2. Notes to 4.9.1 seem to apply.
Tested on ASM1142 and ASM3142 v1.1 xHCs which provide TRB pointers.
Tested on AMD, Etron, Renesas v1.0 xHCs which provide TRB pointers.
Tested on NEC v0.96 and VIA v1.0 xHCs which send a NULL pointer.
Change inspired by a discussion about realtime USB audio.
Link: https://lore.kernel.org/linux-usb/76e1a191-020d-4a76-97f6-237f9bd0ede0@gmx.net/T/
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TRB pointer of these events points at enqueue at the time of error
occurrence on xHCI 1.1+ HCs or it's NULL on older ones. By the time we
are handling the event, a new TD may be queued at this ring position.
I can trigger this race by rising interrupt moderation to increase IRQ
handling delay. Similar delay may occur naturally due to system load.
If this ever happens after a Missed Service Error, missed TDs will be
skipped and the new TD processed as if it matched the event. It could
be given back prematurely, risking data loss or buffer UAF by the xHC.
Don't complete TDs on xrun events and don't warn if queued TDs don't
match the event's TRB pointer, which can be NULL or a link/no-op TRB.
Don't warn if there are no queued TDs at all.
Now that it's safe, also handle xrun events if the skip flag is clear.
This ensures completion of any TD stuck in 'error mid TD' state right
before the xrun event, which could happen if a driver submits a finite
number of URBs to a buggy HC and then an error occurs on the last TD.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Missed Service Error after an error mid TD means that the failed TD has
already been passed by the xHC without acknowledgment of the final TRB,
a known hardware bug. So don't wait any more and give back the TD.
Reproduced on NEC uPD720200 under conditions of ludicrously bad USB link
quality, confirmed to behave as expected using dynamic debug.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Up until commit d56b0b2ab1 ("usb: xhci: ensure skipped isoc TDs are
returned when isoc ring is stopped") in v6.11, the driver didn't skip
missed isochronous TDs when handling Stoppend and Stopped - Length
Invalid events. Instead, it erroneously cleared the skip flag, which
would cause the ring to get stuck, as future events won't match the
missed TD which is never removed from the queue until it's cancelled.
This buggy logic seems to have been in place substantially unchanged
since the 3.x series over 10 years ago, which probably speaks first
and foremost about relative rarity of this case in normal usage, but
by the spec I see no reason why it shouldn't be possible.
After d56b0b2ab1, TDs are immediately skipped when handling those
Stopped events. This poses a potential problem in case of Stopped -
Length Invalid, which occurs either on completed TDs (likely already
given back) or Link and No-Op TRBs. Such event won't be recognized
as matching any TD (unless it's the rare Link TRB inside a TD) and
will result in skipping all pending TDs, giving them back possibly
before they are done, risking isoc data loss and maybe UAF by HW.
As a compromise, don't skip and don't clear the skip flag on this
kind of event. Then the next event will skip missed TDs. A downside
of not handling Stopped - Length Invalid on a Link inside a TD is
that if the TD is cancelled, its actual length will not be updated
to account for TRBs (silently) completed before the TD was stopped.
I had no luck producing this sequence of completion events so there
is no compelling demonstration of any resulting disaster. It may be
a very rare, obscure condition. The sole motivation for this patch
is that if such unlikely event does occur, I'd rather risk reporting
a cancelled partially done isoc frame as empty than gamble with UAF.
This will be fixed more properly by looking at Stopped event's TRB
pointer when making skipping decisions, but such rework is unlikely
to be backported to v6.12, which will stay around for a few years.
Fixes: d56b0b2ab1 ("usb: xhci: ensure skipped isoc TDs are returned when isoc ring is stopped")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function is a remnant from a previous implementation and is now
redundant. There is no longer a need to search for the dequeue pointer,
as both the TRB and segment dequeue pointers are saved within
'queued_deq_seg' and 'queued_deq_ptr'.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
U2 value is encoded in 256 microsecond intervals, show in microseconds.
U1 value is in microseconds. debug message incorrectly showed "ms"
Unwrap debug messages while we anyway modify them.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The main and bulk of the addition this time is the support for the Arm
reference Morello System Development Platform (SDP).
The Morello architecture is an experimental extension to Armv8.2-A,
enhancing the AArch64 execution state with capabilities for fine-grained
memory protection and scalable software compartmentalization. However
these changes doesn't add any of the support for security enhancements.
This is mainly adding device tree support for Morello SDP.
The platform iteslf is shipped with ACPI firmware. However, since the
ACPI bindings for GPU, DPU, I2C, I2S,..etc are not well defined or not
provided in the shipped ACPI firmware, there is a need for the device
tree as alternative for the developers focusing on those features.
The CPU is called rainier, the architecture is Morello and the platform
is Morello SDP board. There is FVP equivalent of the same though they
are not completely in feature parity with the real hardware.
These changes provide the initial support for Morello SDP and FVP
platforms.
Apart from this, we have an update to add support for secondary cores
on Corstone1000 FVP platform.
-----BEGIN PGP SIGNATURE-----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=QVaZ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Pf5p
-----END PGP SIGNATURE-----
Merge tag 'juno-updates-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt
Armv8 FVP/Vexpress/Juno updates for v6.15
The main and bulk of the addition this time is the support for the Arm
reference Morello System Development Platform (SDP).
The Morello architecture is an experimental extension to Armv8.2-A,
enhancing the AArch64 execution state with capabilities for fine-grained
memory protection and scalable software compartmentalization. However
these changes doesn't add any of the support for security enhancements.
This is mainly adding device tree support for Morello SDP.
The platform iteslf is shipped with ACPI firmware. However, since the
ACPI bindings for GPU, DPU, I2C, I2S,..etc are not well defined or not
provided in the shipped ACPI firmware, there is a need for the device
tree as alternative for the developers focusing on those features.
The CPU is called rainier, the architecture is Morello and the platform
is Morello SDP board. There is FVP equivalent of the same though they
are not completely in feature parity with the real hardware.
These changes provide the initial support for Morello SDP and FVP
platforms.
Apart from this, we have an update to add support for secondary cores
on Corstone1000 FVP platform.
* tag 'juno-updates-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: corstone1000: Add definitions for secondary CPU cores
MAINTAINERS: Add Vincenzo Frascino as Arm Morello Maintainer
arm64: dts: morello: Add support for fvp dts
arm64: dts: morello: Add support for soc dts
arm64: dts: morello: Add support for common functionalities
dt-bindings: arm-pmu: Add support for ARM Rainier PMU
dt-bindings: arm: Add Rainier compatibility
dt-bindings: arm: Add Morello fvp compatibility
dt-bindings: arm: Add Morello compatibility
arm64: Kconfig: Update description for CONFIG_ARCH_VEXPRESS
Link: https://lore.kernel.org/r/20250304105856.432848-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>