By using a _free() macro multiple duplicated snippets of code to free
the sink can be dropped. The sink will be released when leaving scope.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A scoped guard will release the mutex when it goes out of scope.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using a _free(kfree) macro drops the need for a goto statement
as it will be freed when it goes out of scope.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_dm_irq_resume_early() and amdgpu_dm_irq_resume_late() don't
have any error flows. Change the return type from integer to void.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_dbg() is helpful to show which device had the debug statement.
Adjust to using this instead for debug messages.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Scoped guards will release the mutex when they go out of scope.
Adjust the code to use these instead.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_err() is helpful to show which device had the error. Adjust to
using this instead for error messages.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All cases except a failure to create a copy of the current context will
call dc_state_release() on the copied context.
Use a _free() macro to free the context and then adjust the error handling
flow to drop the unnecessary use of goto statements.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_dm_commit_zero_streams() returns a DC error code that isn't
checked. Add an explicit check to this and fail dm_suspend() if it
is not DC_OK.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `ret` variable in dm_suspend() doesn't get set and is just used
to return 0. Drop the needless declaration.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_dm_irq_suspend() doesn't have any error flows and always
returns zero.
Change the function to void.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
USB4 DP BW Allocation uses DP_TUNNELING_IRQ to indicate the status update.
The DP_TUNNELING_IRQ is defined in LINK_SERVICE_IRQ_VECTOR_ESI0. When
receiving DP HPD IRQ in USB4, read the LINK_SERVICE_IRQ_VECTOR_ESI0.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We want to add a visual confirm mode for DCC and MCache for
debugging purpose.
[HOW]
color pipes based on whether DCC is enabled and what MCache id
is used.
black - DCC disabled
red - DCC enabled
grey - 2 different MCaches used
other colors - 1 MCache used
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Leo Zeng <Leo.Zeng@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If we soft reset before halt finishes and there are outstanding
memory transactions then the memory interface may produce unexpected
results, such as out of order transactions when the firmware next runs.
These can manifest as random or unexpected load/store violations.
[How]
Increase the timeout before soft reset to ensure the DMCUB has quiesced.
This is effectively 1s maximum based on experimentation.
Use the enable bit check on DCN31 like we're doing on DCN35 and reorder
the reset writes to follow the HW programming guide.
Ensure we're reading SCRATCH7 instead of SCRATCH8 for the HALT code.
No current versions of DMCUB firmware use the SCRATCH8 boot bit to
dynamically switch where the HALT code goes to maintain backwards
compatibility with PSP.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 50f040c53e ("drm/amd/display: Increase halt
timeout for DMCUB to 1s")
There's two issues here:
1. Each poll is closer to 10us than 1us so it stalls for 15s on PNP.
2. We're reading the wrong scratch register to check for the HALT code.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
amdgpu_dm_find_first_crtc_matching_connector can return NULL.
It is necessary to the returned connector before passing it
drm_atomic_get_new_connector_state which always assumes connector is
not NULL.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
The struct is not and will not be used, as it is no longer relevant nor
supported.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Certain PCON will clear the FRL_MODE bit despite supporting the link BW
indicated in the other bits.
Thus, skip checking the FRL_MODE bit when interpreting the
hdmi_encoded_link_bw struct.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
These are left required changes for dio encoder refactor.
[HOW]
1. original logic is separated by config option
2. new link encoder dp enable/disable code for dcn35
3. process fec only for DP 8b10b encoding
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Read if panel support multi-sst links
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It should no longer use DMCUB_SOFT_RESET as it can result
in the memory request path becoming desynchronized.
[HOW]
To ensure robustness in the reset sequence:
1) Extend timeout on the "halt" command sent via gpint, and check for
controller to enter "wait" as a stronger guarantee that there are no
requests to memory still in flight.
2) Remove usage of DMCUB_SOFT_RESET
3) Rely on PSP to reset the controller safely
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
P-state type would remain on previously used when unsupported which
causes confusion in logging and visual confirm, so set back to zero
when unsupported.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When SubVP is active the HW cursor size is limited to 64x64, and
anything larger will force composition which is bad for gaming on
DCN3.2 if the game uses a larger cursor.
[how]
If HW cursor is requested, typically by a fullscreen game, do not
enable SubVP so that up to 256x256 cursor sizes are available for
DCN3.2.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a type mismatch between what CalculateDynamicMetadataParameters()
takes and what is passed to it. Currently this function accepts several
args as signed long but it's called with unsigned integers and integer. On
some systems where long is 32 bits and one of these unsigned int params is
greater than INT_MAX it may cause passing input params as negative values.
Fix this by changing these argument types from long to unsigned int and to
int respectively. Also this will align the function's definition with
similar functions in other dcn* drivers.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 6725a88f88 ("drm/amd/display: Add DCN3 DML")
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to JPEG v4.0.3, HDP flush shouldn't be performed by JPEG engine.
Keep it empty.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates the SDMA scheduler mask handling to include the page queue
if it exists. The scheduler mask is calculated based on the number of SDMA
instances and the presence of the page queue. The mask is updated to reflect
the state of both the SDMA gfx ring and the page queue.
Changes:
- Add handling for the SDMA page queue in `amdgpu_debugfs_sdma_sched_mask_set`.
- Update scheduler mask calculations to include the page queue.
- Modify `amdgpu_debugfs_sdma_sched_mask_get` to return the correct mask value.
This change is necessary to verify multiple queues (SDMA gfx queue + page queue)
and ensure proper scheduling and state management for SDMA instances.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN v5.0.1 also will need register offset normalization. Reuse the logic
from VCN v4.0.3. Also, avoid HDP flush similar to VCN v4.0.3
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Free CPER entry when it's committed to CPER ring to avoid memory leak.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found some typos while exploring radeon code.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found some typos while exploring amdgpu code.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Whilst an interesting part, no one has done significant work on this
driver since 2019. The recent changes are all as a result of adis library
improvements having to incorporate this device.
https://www.analog.com/en/products/adis16240.html now lists this part
as obsolete so the chances of anyone working on it are likely to be greatly
reduced.
So drop it. We can always bring it back if anyone does have interest in
this device and is willing to invest the time to make it suitable for a
staging graduation. How to handle the hardware triggered short bursts
of capture has never been resolved and is a somewhat challenging ABI design
problem.
Cc: Nuno Sa <nuno.sa@analog.com>
Cc: Rodrigo Carvalho <rodrigorsdc@gmail.com>
Link: https://patch.msgid.link/20250222152021.1039675-1-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Merge the pmdomain fixes for v6.14-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.15.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
ISP and MIPI_ISP, these two have a parent-child relationship,
ISP depends on MIPI_ISP.
Fixes: ca75e4b214 ("pmdomain: amlogic: Add support for T7 power domains controller")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250303-fix-t7-pwrc-v1-1-b563612bcd86@amlogic.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The utf16_le_to_7bit function claims to, naively, convert a UTF-16
string to a 7-bit ASCII string. By naively, we mean that it:
* drops the first byte of every character in the original UTF-16 string
* checks if all characters are printable, and otherwise replaces them
by exclamation mark "!".
This means that theoretically, all characters outside the 7-bit ASCII
range should be replaced by another character. Examples:
* lower-case alpha (ɒ) 0x0252 becomes 0x52 (R)
* ligature OE (œ) 0x0153 becomes 0x53 (S)
* hangul letter pieup (ㅂ) 0x3142 becomes 0x42 (B)
* upper-case gamma (Ɣ) 0x0194 becomes 0x94 (not printable) so gets
replaced by "!"
The result of this conversion for the GPT partition name is passed to
user-space as PARTNAME via udev, which is confusing and feels questionable.
However, there is a flaw in the conversion function itself. By dropping
one byte of each character and using isprint() to check if the remaining
byte corresponds to a printable character, we do not actually guarantee
that the resulting character is 7-bit ASCII.
This happens because we pass 8-bit characters to isprint(), which
in the kernel returns 1 for many values > 0x7f - as defined in ctype.c.
This results in many values which should be replaced by "!" to be kept
as-is, despite not being valid 7-bit ASCII. Examples:
* e with acute accent (é) 0x00E9 becomes 0xE9 - kept as-is because
isprint(0xE9) returns 1.
* euro sign (€) 0x20AC becomes 0xAC - kept as-is because isprint(0xAC)
returns 1.
This way has broken pyudev utility[1], fixes it by using a mask of 7 bits
instead of 8 bits before calling isprint.
Link: https://github.com/pyudev/pyudev/issues/490#issuecomment-2685794648 [1]
Link: https://lore.kernel.org/linux-block/4cac90c2-e414-4ebb-ae62-2a4589d9dc6e@canonical.com/
Cc: Mulhern <amulhern@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: stable@vger.kernel.org
Signed-off-by: Olivier Gayot <olivier.gayot@canonical.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250305022154.3903128-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper function io_cache_free() that returns an allocation to a
io_alloc_cache, falling back on kfree() if the io_alloc_cache is full.
This is the inverse of io_cache_alloc(), which takes an allocation from
an io_alloc_cache and falls back on kmalloc() if the cache is empty.
Convert 4 callers to use the helper.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Suggested-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20250304194814.2346705-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The parameters set by the set_params call are only applied to the block
device in the start_dev call. So if a device has already been started, a
subsequently issued set_params on that device will not have the desired
effect, and should return an error. There is an existing check for this
- set_params fails on devices in the LIVE state. But this check is not
sufficient to cover the recovery case. In this case, the device will be
in the QUIESCED or FAIL_IO states, so set_params will succeed. But this
success is misleading, because the parameters will not be applied, since
the device has already been started (by a previous ublk server). The bit
UB_STATE_USED is set on completion of the start_dev; use it to detect
and fail set_params commands which arrive too late to be applied (after
start_dev).
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Fixes: 0aa73170eb ("ublk_drv: add SET_PARAMS/GET_PARAMS control command")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250304-set_params-v1-1-17b5e0887606@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The checkpoint is the top priority thread which can stop all the filesystem
operations. Let's make it RT priority.
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Assigning a string to an array which is too small to include the NUL
byte at the end causes a warning on some compilers. But this function
also has some other oddities like the 'header' array which is only ever
used within sizeof().
Tidy up the function by removing the 'header' array, allow the NUL byte
to be present in git_sha_header, and calculate the length directly from
git_sha_header.
Reported-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/all/20250213154237.GA11897@willie-the-truck/
Fixes: 9d443deb04 ("drm/panthor: Display FW version information")
Signed-off-by: Steven Price <steven.price@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213161248.1642392-1-steven.price@arm.com
Commit 434e5ca5b5 ("drm/panthor: Expose size of driver internal BO's over
fdinfo") locks the VMS xarray, to avoid UAF errors when the same VM is
being concurrently destroyed by another thread. However, that puts the
current thread in atomic context, which means taking the VMS' heap locks
will trigger a warning as the thread is no longer allowed to sleep.
Because in this case replacing the heap mutex with a spinlock isn't
feasible, the fdinfo handler no longer traverses the list of heaps for
every single VM associated with an open DRM file. Instead, when a new heap
chunk is allocated, its size is accumulated into a pool-wide tally, which
also makes the atomic context code path somewhat faster.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: 434e5ca5b5 ("drm/panthor: Expose size of driver internal BO's over fdinfo")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303190923.1639985-2-adrian.larumbe@collabora.com
This add a match for cs42l43 on sdw link 2, 3 cs35l56 on sdw link 1 and
3. All speakers are aggregated.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20250305135443.201884-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This add a match for cs42l43 on sdw link 2, 3 cs35l56 on sdw link 1 and
3. All speakers are aggregated.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20250305135443.201884-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a SoundWire multi function mockup codec support.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250305135443.201884-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a SoundWire multi function mockup codec support.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250305135443.201884-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SoundWire multi function codecs are common used in recent platforms.
Add a multi function mockup codec to test without real codec.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250305135443.201884-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
part id 0xaaaa codec is a mockup codec. Make it be a multi function
codec. So that we can test multi function with a mockup codec.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250305135443.201884-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add rt713_vb on SDW link 3 and 2 rt1320 on SDW link 1 and 2 configuration
support.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250305135443.201884-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>