Command DB is a database in the shared memory of QCOM SoCs, that
provides a mapping between resource key and the resource address for a
system resource managed by a remote processor. The data is stored in a
shared memory region and is loaded by the remote processor. Therefore,
enabling Command DB ensures that those resources function properly.
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/r/20250221-add_command_db_support-v1-1-d60acbf913aa@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath11k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-13-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath11k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-12-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath11k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-11-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath11k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-10-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-9-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-8-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-7-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-6-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-5-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-4-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-3-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-2-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-1-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When no link frequencies are set, msm/dp driver defaults to HBR2 speed.
Explicitly list supported frequencies including HBR3/8.1Gbps for all
external DisplayPort(s).
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250226231436.16138-5-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When no link frequencies are set, msm/dp driver defaults to HBR2 speed.
Explicitly list supported frequencies including HBR3/8.1Gbps for all
external DisplayPort(s).
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250226231436.16138-4-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When no link frequencies are set, msm/dp driver defaults to HBR2 speed.
Explicitly list supported frequencies including HBR3/8.1Gbps for all
external DisplayPort(s).
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250226231436.16138-3-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Particular laptops comes with two USB Type-C ports, both supporting DP
alt mode. Enable output on both of them. Explicitly list supported
frequencies including HBR3/8.1Gbps for all external DisplayPort(s).
Due to support missing in the USB/DisplayPort combo PHY driver,
the external DisplayPort is limited to 2 lanes.
Derived from:
arm64: dts: qcom: x1e80100-t14s: Add external DP support
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250226231436.16138-2-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Initially added, the cma heap was supposed to help with libcamera swisp,
however a mistake was made such that the node was never applied as part
of the overlay since the change was added to the overlay root ("/") and
not with a reference to the target dtb root ("&{/}"). Moveover libcamera
doesn't require CMA heap on Qualcomm platforms anymore as it can now use
UDMA buffers instead.
Drop the CMA heap node. This change has no effect on the final dtb.
This reverts commit d40fd02c1f.
Fixes: d40fd02c1f ("arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add cma heap for libcamera softisp support")
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250227-qcom-nonroot-overlays-v2-2-bde44f708cbe@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Initially added, the cma heap was supposed to help with libcamera swisp,
however a mistake was made such that the node was never applied as part
of the overlay since the change was added to the overlay root ("/") and
not with a reference to the target dtb root ("&{/}"). Moveover libcamera
doesn't require CMA heap on Qualcomm platforms anymore as it can now use
UDMA buffers instead.
Drop the CMA heap node. This change has no effect on the final dtb.
This reverts commit 99d557cfe4.
Fixes: 99d557cfe4 ("arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add cma heap for libcamera softisp support")
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250227-qcom-nonroot-overlays-v2-1-bde44f708cbe@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250228-clk-qcom-const-v1-4-611ab80d45e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250228-clk-qcom-const-v1-3-611ab80d45e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250228-clk-qcom-const-v1-2-611ab80d45e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250228-clk-qcom-const-v1-1-611ab80d45e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm x1e80100-camcc was moved to its own dt bindings description
file, however a small leftover was left, remove it.
Fixes: 7ec95ff9ab ("dt-bindings: clock: move qcom,x1e80100-camcc to its own file")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20250303223936.1780441-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are currently two passive trip points defined for the CPU, but no
cooling devices are attached to the thermal zones. We don't have support
for cpufreq upstream yet, but actually this is redundant anyway because the
CPU is throttled automatically when reaching high temperatures.
Drop the passive trip points and keep just the critical shutdown as safety
measure in case the throttling fails.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250219-x1e80100-thermal-fixes-v1-4-d110e44ac3f9@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Unlike the CPU, the GPU does not throttle its speed automatically when it
reaches high temperatures. With certain high GPU loads it is possible to
reach the critical hardware shutdown temperature of 120°C, endangering the
hardware and making it impossible to run certain applications.
Set up GPU cooling similar to the ACPI tables, by throttling the GPU speed
when reaching 95°C and polling every 200ms.
Cc: stable@vger.kernel.org
Fixes: 721e38301b ("arm64: dts: qcom: x1e80100: Add gpu support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250219-x1e80100-thermal-fixes-v1-3-d110e44ac3f9@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The firmware configures the TSENS controller with a maximum temperature of
120°C. When reaching that temperature, the hardware automatically triggers
a reset of the entire platform. Some of the thermal zones in x1e80100.dtsi
use a critical trip point of 125°C. It's impossible to reach those.
It's preferable to shut down the system cleanly before reaching the
hardware trip point. Make the critical temperature trip points consistent
by setting all of them to 115°C and apply a consistent hysteresis.
The ACPI tables also specify 115°C as critical shutdown temperature.
Cc: stable@vger.kernel.org
Fixes: 4e915987ff ("arm64: dts: qcom: x1e80100: Enable tsens and thermal zone nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250219-x1e80100-thermal-fixes-v1-2-d110e44ac3f9@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
A passive trip point at 125°C is pretty high, this is usually the
temperature for the critical shutdown trip point. Also, we don't have any
passive cooling devices attached to the video thermal zone.
Change this to be a critical trip point, and add a "hot" trip point at
90°C for consistency with the other thermal zones.
Cc: stable@vger.kernel.org
Fixes: 4e915987ff ("arm64: dts: qcom: x1e80100: Enable tsens and thermal zone nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250219-x1e80100-thermal-fixes-v1-1-d110e44ac3f9@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The bindings requires the mdp0-mem and the cpu-cfg interconnect path,
add the missing cpu-cfg path to fix the dtbs check error and also to ensure
that MDSS has enough bandwidth to let HLOS write config registers.
Fixes: 9fa33cbca3 ("arm64: dts: qcom: sm8650: correct MDSS interconnects")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250227-topic-sm8x50-mdss-interconnect-bindings-fix-v5-2-bf6233c6ebe5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The bindings requires the mdp0-mem and the cpu-cfg interconnect path,
add the missing cpu-cfg path to fix the dtbs check error and also to ensure
that MDSS has enough bandwidth to let HLOS write config registers.
Fixes: b8591df49c ("arm64: dts: qcom: sm8550: correct MDSS interconnects")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250227-topic-sm8x50-mdss-interconnect-bindings-fix-v5-1-bf6233c6ebe5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Remove unnecessary locking and unlocking of spinlock in
fdls_schedule_oxid_free_retry_work(). This will shorten the time in the
critical section.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: a63e78eb2b ("scsi: fnic: Add support for fabric based solicited requests and responses")
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Reviewed-by: Arun Easi <aeasi@cisco.com>
Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20250301013712.3115-2-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace fnic->lock_flags with local variable for usage with spinlocks in
fdls_schedule_oxid_free_retry_work().
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: a63e78eb2b ("scsi: fnic: Add support for fabric based solicited requests and responses")
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Reviewed-by: Arun Easi <aeasi@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20250301013712.3115-1-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove cast and replace use of sizeof(struct) with standard usage of
sizeof.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: a63e78eb2b ("scsi: fnic: Add support for fabric based solicited requests and responses")
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Reviewed-by: Arun Easi <aeasi@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20250225215056.4899-1-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove unnecessary debug print from fdls_schedule_oxid_free_retry_work. As
suggested by Dan, this information is already present in stack traces, and
the kernel is not expected to fail small allocations.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: a63e78eb2b ("scsi: fnic: Add support for fabric based solicited requests and responses")
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Reviewed-by: Arun Easi <aeasi@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20250225214909.4853-1-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
strncpy() is deprecated for NUL-terminated destination buffers; use
strscpy() instead. The destination buffer db_root is only used with "%s"
format strings and must therefore be NUL-terminated, but not NUL-padded.
Use scnprintf() because snprintf() could return a value >= DB_ROOT_LEN
and lead to an out-of-bounds access. This doesn't happen because count
is explicitly checked against DB_ROOT_LEN before. However, scnprintf()
always returns the number of characters actually written to the string
buffer, which is always within the bounds of db_root_stage, and should
be preferred over snprintf().
The size parameter of strscpy() is optional and since DB_ROOT_LEN is the
size of the destination buffer, it can be removed. Remove it to simplify
the code.
Compile-tested only.
Link: https://github.com/KSPP/linux/issues/90
Link: https://github.com/KSPP/linux/issues/105
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250302225641.245127-2-thorsten.blum@linux.dev
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bound scsi_logging_level sysctl writings between SYSCTL_ZERO and
SYSCTL_INT_MAX.
The proc_handler has thus been updated to proc_dointvec_minmax.
Signed-off-by: Nicolas Bouchinet <nicolas.bouchinet@ssi.gouv.fr>
Link: https://lore.kernel.org/r/20250224095826.16458-5-nicolas.bouchinet@clip-os.org
Reviewed-by: Joel Granados <joel.granados@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a comment block describing the COMPLETED case with ASC/ASCQ 0x55/0xA
to mention that it relates to command duration limits very special
policy 0xD command completion.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250228031751.12083-1-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The "sz" argument in mpt3sas_check_cmd_timeout() is the number of u32, not
the number of bytes. We dump that many u32 values to dmesg. Passing the
number of bytes will lead to a read overflow. Divide by 4 to get the
correct value.
Fixes: c72be4b5bb ("scsi: mpt3sas: Add support for MCTP Passthrough commands")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/02b0d4ff-961c-49ae-921a-5cc469edf93c@stanley.mountain
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a spelling mistake in a lpfc_printf_log message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250227225046.660865-1-colin.i.king@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies(E * 1000)
+secs_to_jiffies(E)
-msecs_to_jiffies(E * MSEC_PER_SEC)
+secs_to_jiffies(E)
While here, convert some timeouts that are denominated in seconds
manually.
[mkp: Fix compilation error]
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-2-a43967e36c88@linux.microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Building with W=1 shows a warning about sas_v2_acpi_match being unused when
CONFIG_OF is disabled:
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c:3635:36: error: unused variable 'sas_v2_acpi_match' [-Werror,-Wunused-const-variable]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225163637.4169300-1-arnd@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250225101142.161474-1-colin.i.king@gmail.com
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add quirk for a copper SFP that identifies itself as "FS" "SFP-10GM-T".
It uses RollBall protocol to talk to the PHY and needs 4 sec wait before
probing the PHY.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://patch.msgid.link/20250227071058.1520027-1-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang says:
====================
add sock_kmemdup helper
While developing MPTCP BPF path manager [1], I found it's useful to
add a new sock_kmemdup() helper.
My use case is this:
In mptcp_userspace_pm_append_new_local_addr() function (see patch 3
in this patchset), it uses sock_kmalloc() to allocate an address
entry "e", then immediately duplicate the input "entry" to it:
'''
e = sock_kmalloc(sk, sizeof(*e), GFP_ATOMIC);
if (!e) {
ret = -ENOMEM;
goto append_err;
}
*e = *entry;
'''
When I implemented MPTCP BPF path manager, I needed to implement a
code similar to this in BPF.
The kfunc sock_kmalloc() can be easily invoked in BPF to allocate
an entry "e", but the code "*e = *entry;" that assigns "entry" to
"e" is not easy to implemented.
I had to implement such a "copy entry" helper in BPF:
'''
static void mptcp_pm_copy_addr(struct mptcp_addr_info *dst,
struct mptcp_addr_info *src)
{
dst->id = src->id;
dst->family = src->family;
dst->port = src->port;
if (src->family == AF_INET) {
dst->addr.s_addr = src->addr.s_addr;
} else if (src->family == AF_INET6) {
dst->addr6.s6_addr32[0] = src->addr6.s6_addr32[0];
dst->addr6.s6_addr32[1] = src->addr6.s6_addr32[1];
dst->addr6.s6_addr32[2] = src->addr6.s6_addr32[2];
dst->addr6.s6_addr32[3] = src->addr6.s6_addr32[3];
}
}
static void mptcp_pm_copy_entry(struct mptcp_pm_addr_entry *dst,
struct mptcp_pm_addr_entry *src)
{
mptcp_pm_copy_addr(&dst->addr, &src->addr);
dst->flags = src->flags;
dst->ifindex = src->ifindex;
}
'''
And add "write permission" for BPF to each field of mptcp_pm_addr_entry:
'''
@@ static int bpf_mptcp_pm_btf_struct_access(struct bpf_verifier_log *log,
case offsetof(struct mptcp_pm_addr_entry, addr.port):
end = offsetofend(struct mptcp_pm_addr_entry, addr.port);
break;
#if IS_ENABLED(CONFIG_MPTCP_IPV6)
case offsetof(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[0]):
end = offsetofend(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[0]);
break;
case offsetof(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[1]):
end = offsetofend(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[1]);
break;
case offsetof(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[2]):
end = offsetofend(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[2]);
break;
case offsetof(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[3]):
end = offsetofend(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[3]);
break;
#else
case offsetof(struct mptcp_pm_addr_entry, addr.addr.s_addr):
end = offsetofend(struct mptcp_pm_addr_entry, addr.addr.s_addr);
break;
#endif
'''
But if there's a sock_kmemdup() helper, it will become much simpler,
only need to call kfunc sock_kmemdup() instead in BPF.
So this patchset adds this new helper and uses it in several places.
[1]
https://lore.kernel.org/mptcp/cover.1738924875.git.tanggeliang@kylinos.cn/
====================
Link: https://patch.msgid.link/cover.1740735165.git.tanggeliang@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>