Commit graph

1,403,262 commits

Author SHA1 Message Date
Christoph Hellwig
2167eaabe2 xfs: define the zoned on-disk format
Zone file systems reuse the basic RT group enabled XFS file system
structure to support a mode where each RT group is always written from
start to end and then reset for reuse (after moving out any remaining
data).  There are few minor but important changes, which are indicated
by a new incompat flag:

1) there are no bitmap and summary inodes, thus the
   /rtgroups/{rgno}.{bitmap,summary} metadir files do not exist and the
   sb_rbmblocks superblock field must be cleared to zero.

2) there is a new superblock field that specifies the start of an
   internal RT section.  This allows supporting SMR HDDs that have random
   writable space at the beginning which is used for the XFS data device
   (which really is the metadata device for this configuration), directly
   followed by a RT device on the same block device.  While something
   similar could be achieved using dm-linear just having a single device
   directly consumed by XFS makes handling the file systems a lot easier.

3) Another superblock field that tracks the amount of reserved space (or
   overprovisioning) that is never used for user capacity, but allows GC
   to run more smoothly.

4) an overlay of the cowextsize field for the rtrmap inode so that we
   can persistently track the total amount of rtblocks currently used in
   a RT group.  There is no data structure other than the rmap that
   tracks used space in an RT group, and this counter is used to decide
   when a RT group has been entirely emptied, and to select one that
   is relatively empty if garbage collection needs to be performed.
   While this counter could be tracked entirely in memory and rebuilt
   from the rmap at mount time, that would lead to very long mount times
   with the large number of RT groups implied by the number of hardware
   zones especially on SMR hard drives with 256MB zone sizes.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
2025-03-03 08:16:45 -07:00
Christoph Hellwig
aacde95a37 xfs: add a xfs_rtrmap_highest_rgbno helper
Add a helper to find the last offset mapped in the rtrmap.  This will be
used by the zoned code to find out where to start writing again on
conventional devices without hardware zone support.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
2025-03-03 08:16:45 -07:00
Christoph Hellwig
f42c652434 xfs: support XFS_BMAPI_REMAP in xfs_bmap_del_extent_delay
The zone allocator wants to be able to remove a delalloc mapping in the
COW fork while keeping the block reservation.  To support that pass the
flags argument down to xfs_bmap_del_extent_delay and support the
XFS_BMAPI_REMAP flag to keep the reservation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
2025-03-03 08:16:44 -07:00
Christoph Hellwig
6fff175279 xfs: refine the unaligned check for always COW inodes in xfs_file_dio_write
For always COW inodes we also must check the alignment of each individual
iovec segment, as they could end up with different I/Os due to the way
bio_iov_iter_get_pages works, and we'd then overwrite an already written
block.  The existing always_cow sysctl based code doesn't catch this
because nothing enforces that blocks aren't rewritten, but for zoned XFS
on sequential write required zones this is a hard error.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
2025-03-03 08:16:44 -07:00
Christoph Hellwig
8ae4c8cec0 xfs: skip always_cow inodes in xfs_reflink_trim_around_shared
xfs_reflink_trim_around_shared tries to find shared blocks in the
refcount btree.  Always_cow inodes don't have that tree, so don't
bother.

For the existing always_cow code this is a minor optimization.  For
the upcoming zoned code that can do COW without the rtreflink code it
avoids triggering a NULL pointer dereference.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
2025-03-03 08:16:44 -07:00
Christoph Hellwig
7c879c8275 xfs: move xfs_bmapi_reserve_delalloc to xfs_iomap.c
Delalloc reservations are not supported in userspace, and thus it doesn't
make sense to share this helper with xfsprogs.c.  Move it to xfs_iomap.c
toward the two callers.

Note that there rest of the delalloc handling should probably eventually
also move out of xfs_bmap.c, but that will require a bit more surgery.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
2025-03-03 08:16:44 -07:00
Christoph Hellwig
012482b330 xfs: add a rtg_blocks helper
Shortcut dereferencing the xg_block_count field in the generic group
structure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
2025-03-03 08:16:44 -07:00
Christoph Hellwig
a581de0d61 xfs: factor out a xfs_rt_check_size helper
Add a helper to check that the last block of a RT device is readable
to share the code between mount and growfs.  This also adds the mount
time overflow check to growfs and improves the error messages.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
2025-03-03 08:16:44 -07:00
Christoph Hellwig
272e20bb24 xfs: reduce metafile reservations
There is no point in reserving more space than actually available
on the data device for the worst case scenario that is unlikely to
happen.  Reserve at most 1/4th of the data device blocks, which is
still a heuristic.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
2025-03-03 08:16:43 -07:00
Christoph Hellwig
1df8d75030 xfs: make metabtree reservations global
Currently each metabtree inode has it's own space reservation to ensure
it can be expanded to the maximum size, mirroring what is done for the
AG-based btrees.  But unlike the AG-based btrees the metabtree inodes
aren't restricted to allocate from a single AG but can use free space
form the entire file system.  And unlike AG-based btrees where the
required reservation shrinks with the available free space due to this,
the metabtree reservations for the rtrmap and rtfreflink trees are not
bound in any way by the data device free space as they track RT extent
allocations.  This is not very efficient as it requires a large number
of blocks to be set aside that can't be used at all by other btrees.

Switch to a model that uses a global pool instead in preparation for
reducing the amount of reserved space, which now also removes the
overloading of the i_nblocks field for metabtree inodes, which would
create problems if metabtree inodes ever had a big enough xattr fork
to require xattr blocks outside the inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
2025-03-03 08:16:43 -07:00
Christoph Hellwig
c0bd736d33 xfs: fixup the metabtree reservation in xrep_reap_metadir_fsblocks
All callers of xrep_reap_metadir_fsblocks need to fix up the metabtree
reservation, otherwise they'd leave the reservations in an incoherent
state.  Move the call to xrep_reset_metafile_resv into
xrep_reap_metadir_fsblocks so it always is taken care of, and remove
now superfluous helper functions in the callers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
2025-03-03 08:16:43 -07:00
Christoph Hellwig
a0760cca8e xfs: trace in-memory freecounter reservations
Add two tracepoints when the freecounter dips into the reserved pool
and when it is entirely out of space.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
2025-03-03 08:16:43 -07:00
Christoph Hellwig
c8c4e8bc69 xfs: support reserved blocks for the rt extent counter
The zoned space allocator will need reserved RT extents for garbage
collection and zeroing of partial blocks.  Move the resblks related
fields into the freecounter array so that they can be used for all
counters.

Co-developed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
2025-03-03 08:16:43 -07:00
Christoph Hellwig
712bae9663 xfs: generalize the freespace and reserved blocks handling
xfs_{add,dec}_freecounter already handles the block and RT extent
percpu counters, but it currently hardcodes the passed in counter.

Add a freecounter abstraction that uses an enum to designate the counter
and add wrappers that hide the actual percpu_counters.  This will allow
expanding the reserved block handling to the RT extent counter in the
next step, and also prepares for adding yet another such counter that
can share the code.  Both these additions will be needed for the zoned
allocator.

Also switch the flooring of the frextents counter to 0 in statfs for the
rthinherit case to a manual min_t call to match the handling of the
fdblocks counter for normal file systems.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
2025-03-03 08:16:37 -07:00
Christoph Hellwig
cc3d2f55c4 xfs: reflow xfs_dec_freecounter
Let the successful allocation be the main path through the function
with exception handling in branches to make the code easier to
follow.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
2025-03-03 08:15:48 -07:00
Kerem Karabay
0670c2f56e drm/tiny: add driver for Apple Touch Bars in x86 Macs
The Touch Bars found on x86 Macs support two USB configurations: one
where the device presents itself as a HID keyboard and can display
predefined sets of keys, and one where the operating system has full
control over what is displayed.

This commit adds support for the display functionality of the second
configuration. Functionality for the first configuration has been
merged in the HID tree.

Note that this driver has only been tested on T2 Macs, and only includes
the USB device ID for these devices. Testing on T1 Macs would be
appreciated.

Credit goes to Ben (Bingxing) Wang on GitHub for reverse engineering
most of the protocol.

Also, as requested by Andy, I would like to clarify the use of __packed
structs in this driver:

- All the packed structs are aligned except for appletbdrm_msg_information.
- We have to pack appletbdrm_msg_information since it is requirement of
  the protocol.
- We compared binaries compiled by keeping the rest structs __packed and
  not __packed using bloat-o-meter, and __packed was not affecting code
  generation.
- To maintain consistency, rest structs have been kept __packed.

I would also like to point out that since the driver was reverse-engineered
the actual data types of the protocol might be different, including, but
not limited to, endianness.

Link: https://github.com/imbushuo/DFRDisplayKm
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Co-developed-by: Atharva Tiwari <evepolonium@gmail.com>
Signed-off-by: Atharva Tiwari <evepolonium@gmail.com>
Co-developed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aun-Ali Zaidi <admin@kodeit.net>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/FCAC702C-F84A-47F9-8C78-BBBB34D08500@live.com
2025-03-03 16:13:33 +01:00
Kerem Karabay
c9043706cb drm/format-helper: Add conversion from XRGB8888 to BGR888
Add XRGB8888 emulation helper for devices that only support BGR888.

Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/9A67EA95-9BC7-4D56-8F87-05EAC1C166AD@live.com
2025-03-03 16:13:33 +01:00
Philipp Stanner
23e0832d6d drm/sched: Fix preprocessor guard
When writing the header guard for gpu_scheduler_trace.h, a typo,
apparently, occurred.

Fix the typo and document the scope of the guard.

Fixes: 353da3c520 ("drm/amdgpu: add tracepoint for scheduler (v2)")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218124149.118002-2-phasta@kernel.org
2025-03-03 16:03:48 +01:00
Paul Benoit
5f9c23abc4 firmware: smccc: Support optional Arm SMCCC SOC_ID name
Issue Number 1.6 of the Arm SMC Calling Convention introduces an optional
SOC_ID name string.  If implemented, point the 'machine' field of the SoC
Device Attributes at this string so that it will appear under
/sys/bus/soc/devices/soc0/machine.

On Arm SMC compliant SoCs, this will allow things like 'lscpu' to
eventually get a SoC provider model name from there rather than each
tool/utility needing to get a possibly inconsistent, obsolete, or incorrect
model/machine name from its own hardcoded model/machine name table.

Signed-off-by: Paul Benoit <paul@os.amperecomputing.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Message-Id: <20250219005932.3466-1-paul@os.amperecomputing.com>
(sudeep.holla: Dropped regsize variable and used 8 instead as Mark suggested)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2025-03-03 14:53:46 +00:00
Raag Jadav
0ee2261d08 pinctrl: intel: drop repeated config dependency
We already have ACPI dependency for Intel pinctrl menu. No need to
repeat it.

Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2025-03-03 16:20:51 +02:00
Xinghuo Chen
10fce7ebe8 hwmon: fix a NULL vs IS_ERR_OR_NULL() check in xgene_hwmon_probe()
The devm_memremap() function returns error pointers on error,
it doesn't return NULL.

Fixes: c7cefce03e ("hwmon: (xgene) access mailbox as RAM")
Signed-off-by: Xinghuo Chen <xinghuo.chen@foxmail.com>
Link: https://lore.kernel.org/r/tencent_9AD8E7683EC29CAC97496B44F3F865BA070A@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-03 06:04:34 -08:00
Dr. David Alan Gilbert
2318fa87f8 libnvdimm: Remove unused nd_attach_ndns
nd_attach_ndns() hasn't been used since 2017's
commit 452bae0aed ("libnvdimm: fix nvdimm_bus_lock() vs device_lock()
ordering")

Remove it.

Note the __ version is still used and has been left.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250220004538.84585-3-linux@treblig.org
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
2025-03-03 08:03:43 -06:00
Dr. David Alan Gilbert
878a8e1ecb libnvdimm: Remove unused nd_region_conflict
nd_region_conflict() has been unused since 2019's
commit a3619190d6 ("libnvdimm/pfn: stop padding pmem namespaces to
section alignment")

Remove it, and the region_confict() helper it uses, and the associated
struct conflict_context.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250220004538.84585-2-linux@treblig.org
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
2025-03-03 08:03:43 -06:00
Murad Masimov
2ff0e408db acpi: nfit: fix narrowing conversion in acpi_nfit_ctl
Syzkaller has reported a warning in to_nfit_bus_uuid(): "only secondary
bus families can be translated". This warning is emited if the argument
is equal to NVDIMM_BUS_FAMILY_NFIT == 0. Function acpi_nfit_ctl() first
verifies that a user-provided value call_pkg->nd_family of type u64 is
not equal to 0. Then the value is converted to int, and only after that
is compared to NVDIMM_BUS_FAMILY_MAX. This can lead to passing an invalid
argument to acpi_nfit_ctl(), if call_pkg->nd_family is non-zero, while
the lower 32 bits are zero.

Furthermore, it is best to return EINVAL immediately upon seeing the
invalid user input.  The WARNING is insufficient to prevent further
undefined behavior based on other invalid user input.

All checks of the input value should be applied to the original variable
call_pkg->nd_family.

[iweiny: update commit message]

Fixes: 6450ddbd5d ("ACPI: NFIT: Define runtime firmware activation commands")
Cc: stable@vger.kernel.org
Reported-by: syzbot+c80d8dc0d9fa81a3cd8c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c80d8dc0d9fa81a3cd8c
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250123163945.251-1-m.masimov@mt-integration.ru
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
2025-03-03 08:03:43 -06:00
Eric Dumazet
64e6a754d3 llc: do not use skb_get() before dev_queue_xmit()
syzbot is able to crash hosts [1], using llc and devices
not supporting IFF_TX_SKB_SHARING.

In this case, e1000 driver calls eth_skb_pad(), while
the skb is shared.

Simply replace skb_get() by skb_clone() in net/llc/llc_s_ac.c

Note that e1000 driver might have an issue with pktgen,
because it does not clear IFF_TX_SKB_SHARING, this is an
orthogonal change.

We need to audit other skb_get() uses in net/llc.

[1]

kernel BUG at net/core/skbuff.c:2178 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 16371 Comm: syz.2.2764 Not tainted 6.14.0-rc4-syzkaller-00052-gac9c34d1e45a #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
 RIP: 0010:pskb_expand_head+0x6ce/0x1240 net/core/skbuff.c:2178
Call Trace:
 <TASK>
  __skb_pad+0x18a/0x610 net/core/skbuff.c:2466
  __skb_put_padto include/linux/skbuff.h:3843 [inline]
  skb_put_padto include/linux/skbuff.h:3862 [inline]
  eth_skb_pad include/linux/etherdevice.h:656 [inline]
  e1000_xmit_frame+0x2d99/0x5800 drivers/net/ethernet/intel/e1000/e1000_main.c:3128
  __netdev_start_xmit include/linux/netdevice.h:5151 [inline]
  netdev_start_xmit include/linux/netdevice.h:5160 [inline]
  xmit_one net/core/dev.c:3806 [inline]
  dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3822
  sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343
  __dev_xmit_skb net/core/dev.c:4045 [inline]
  __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4621
  dev_queue_xmit include/linux/netdevice.h:3313 [inline]
  llc_sap_action_send_test_c+0x268/0x320 net/llc/llc_s_ac.c:144
  llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline]
  llc_sap_next_state net/llc/llc_sap.c:182 [inline]
  llc_sap_state_process+0x239/0x510 net/llc/llc_sap.c:209
  llc_ui_sendmsg+0xd0d/0x14e0 net/llc/af_llc.c:993
  sock_sendmsg_nosec net/socket.c:718 [inline]

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+da65c993ae113742a25f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67c020c0.050a0220.222324.0011.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-03 14:00:04 +00:00
Jackie Dong
61250669ea
platform/x86:lenovo-wmi-hotkey-utilities.c: Support for mic and audio mute LEDs
Implement Lenovo utility data WMI calls needed to make LEDs
work on Ideapads that support this GUID.
This enables the mic and audio LEDs to be updated correctly.

Tested on below samples.
ThinkBook 13X Gen4 IMH
ThinkBook 14 G6 ABP
ThinkBook 16p Gen4-21J8
ThinkBook 16 G8 IRL
ThinkBook 16 G7+ ASP

Signed-off-by: Jackie Dong <xy-jackie@139.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250222114532.4105-1-xy-jackie@139.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-03-03 15:52:25 +02:00
Shengjiu Wang
294a60e5e9
ASoC: fsl_audmix: register card device depends on 'dais' property
In order to make the audmix device linked by audio graph card, make
'dais' property to be optional.

If 'dais' property exists, then register the imx-audmix card driver.
otherwise, it should be linked by audio graph card.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250226100508.2352568-5-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03 13:48:38 +00:00
Shengjiu Wang
597acf1a04
ASoC: dt-bindings: fsl,audmix: make 'dais' property to be optional
Make 'dais' property to be optional. When there is no 'dais' property,
driver won't register the card, dts should have audio graph card node
for linking this device.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250226100508.2352568-4-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03 13:48:37 +00:00
Shengjiu Wang
5fee78e517
ASoC: dt-bindings: fsl,audmix: Document audio graph port
This device can be used in conjunction with audio-graph-card to provide
an endpoint for binding with the other side of the audio link.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250226100508.2352568-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03 13:48:36 +00:00
Shengjiu Wang
abcb9a1fd8
ASoC: dt-bindings: fsl,sai: Document audio graph port
This device can be used in conjunction with audio-graph-card to provide
an endpoint for binding with the other side of the audio link.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250226100508.2352568-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03 13:48:35 +00:00
Rafael J. Wysocki
7226386965 PM: runtime: Unify error handling during suspend and resume
There is a confusing difference in error handling between rpm_suspend()
and rpm_resume() related to the special way in which -EAGAIN and -EBUSY
error values are treated by the former.  Also, converting -EACCES coming
from the callback to I/O error, which it quite likely is not, may
confuse runtime PM users.

To address the above, modify rpm_callback() to convert -EACCES coming
from the driver to -EAGAIN and to set power.runtime_error only if the
return value is not -EAGAIN or -EBUSY.

This will cause the error handling in rpm_resume() and rpm_suspend() to
work consistently, so drop the no longer needed -EAGAIN or -EBUSY
special case from the latter and make it retry autosuspend if
power.runtime_error is unset.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12620037.O9o76ZdvQC@rjwysocki.net
2025-03-03 14:46:19 +01:00
Colin Ian King
f6e221e666 thermal: core: Fix spelling mistake "Occurences" -> "Occurrences"
There is a spelling mistake in a seq_puts string. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250227224006.660164-1-colin.i.king@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-03-03 14:43:27 +01:00
Rafael J. Wysocki
628ccd8052 PM: sleep: Rearrange dpm_async_fn() and async state clearing
In preparation for subsequent changes, move the power.completion
reinitialization along with clearing power.work_in_progress into a
separate function called dpm_clear_async_state() and rearrange
dpm_async_fn() to get rid of unnecessary indentation.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/8494650.T7Z3S40VBb@rjwysocki.net
2025-03-03 14:38:51 +01:00
Frieder Schrempf
c8c1ab2c5c
regulator: pca9450: Handle hardware with fixed SD_VSEL for LDO5
There are two ways to set the output voltage of the LD05
regulator. First by writing to the voltage selection registers
and second by toggling the SD_VSEL signal.

Usually board designers connect SD_VSEL to the VSELECT signal
controlled by the USDHC controller, but in some cases the
signal is hardwired to a fixed low level (therefore selecting
3.3V as initial value for allowing to boot from the SD card).

In these cases, the voltage is only determined by the value
of the LDO5CTRL_L register. Introduce a property
nxp,sd-vsel-fixed-low to let the driver know that SD_VSEL
is low and there is no GPIO to actually get that
information from dynamically.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://patch.msgid.link/20250303132258.50204-1-frieder@fris.de
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03 13:38:23 +00:00
Rafael J. Wysocki
3038b22bc0 PM: sleep: Rename power.async_in_progress to power.work_in_progress
Rename the async_in_progress field in struct dev_pm_info to
work_in_progress as after subsequent changes it will mean work in
general rather than just async work.

No functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3338693.aeNJFYEL58@rjwysocki.net
2025-03-03 14:38:02 +01:00
Rafael J. Wysocki
a84c2a885b PM: core: Tweak pm_runtime_block_if_disabled() return value
Modify pm_runtime_block_if_disabled() to return true when runtime PM
is disabled for the device, regardless of the power.last_status value.

This effectively prevents "smart suspend" from being enabled for
devices with runtime PM disabled in device_prepare(), even transiently,
so update the related comment in that function accordingly.

If a device has runtime PM disabled in device_prepare(), it is not
actually known whether or not runtime PM will be enabled for that
device going forward, so it is more appropriate to postpone the
"smart suspend" optimization for the device in the given system
suspend-resume cycle than to enable it and get confused going
forward.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/13718674.uLZWGnKmhe@rjwysocki.net
2025-03-03 14:35:07 +01:00
Rafael J. Wysocki
1476bb20ee PM: runtime: Convert pm_runtime_blocked() to static inline
The comment in pm_runtime_blocked() is acutally wrong: power.last_status
is not a bit field.  Its data type is an enum and so one can reasonably
assume that partial updates of it will not be observed.

Accordingly, pm_runtime_blocked() can be converted to a static inline
function and the related locking overhead can be eliminated, so long
as it is only used in system suspend/resume code paths because
power.last_status is not expected to be updated concurrently while
that code is running.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/1923449.tdWV9SEqCh@rjwysocki.net
2025-03-03 14:35:07 +01:00
Rafael J. Wysocki
cb88c229fe PM: sleep: Update power.smart_suspend under PM spinlock
Put the update of the power.smart_suspend device flag under the PM
spinlock of the device in case multiple bit fields in struct dev_pm_info
occupy one memory location which needs to be updated via RMW every time
any of these bit fields is updated.

The lock in question is already held around the power.direct_complete
flag update in device_prepare() for the same reason, so this change does
not add locking-related overhead to the code.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2368159.ElGaqSPkdT@rjwysocki.net
2025-03-03 14:35:07 +01:00
Rafael J. Wysocki
eeb87d17ac PM: sleep: Adjust check before setting power.must_resume
The check before setting power.must_resume in device_suspend_noirq()
does not take power.child_count into account, but it should do that, so
use pm_runtime_need_not_resume() in it for this purpose and adjust the
comment next to it accordingly.

Fixes: 107d47b2b9 ("PM: sleep: core: Simplify the SMART_SUSPEND flag handling")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3353728.44csPzL39Z@rjwysocki.net
2025-03-03 14:31:47 +01:00
Dan Carpenter
16e57a7278
drm/vc4: hdmi: Fix some NULL vs IS_ERR() bugs
The devm_platform_ioremap_resource_byname() function doesn't return NULL,
it returns error pointers.  Update the checking to match.

Fixes: b93f07cf09 ("drm/vc4: move to devm_platform_ioremap_resource() usage")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/a952e2b4-d4b8-49ac-abd9-9967c50f4a80@stanley.mountain
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-03-03 14:25:14 +01:00
Maxime Ripard
30188df0c3
drm/tests: Drop drm_kunit_helper_acquire_ctx_alloc()
lockdep complains when a lock is released in a separate thread the
lock is taken in, and it turns out that kunit does run its actions in a
separate thread than the test ran in.

This means that drm_kunit_helper_acquire_ctx_alloc() just cannot work as
it's supposed to, so let's just get rid of it.

Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220132537.2834168-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-03-03 14:21:58 +01:00
Thorsten Blum
3d6c9dd4cb
ASoC: tegra: Fix ADX S24_LE audio format
Commit 4204eccc7b ("ASoC: tegra: Add support for S24_LE audio format")
added support for the S24_LE audio format, but duplicated S16_LE in
OUT_DAI() for ADX instead.

Fix this by adding support for the S24_LE audio format.

Compile-tested only.

Cc: stable@vger.kernel.org
Fixes: 4204eccc7b ("ASoC: tegra: Add support for S24_LE audio format")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250222225700.539673-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03 13:03:10 +00:00
Alexey Klimov
d776f016d2
ASoC: codecs: wsa884x: report temps to hwmon in millidegree of Celsius
Temperatures are reported in units of Celsius however hwmon expects
values to be in millidegree of Celsius. Userspace tools observe values
close to zero and report it as "Not available" or incorrect values like
0C or 1C. Add a simple conversion to fix that.

Before the change:

wsa884x-virtual-0
Adapter: Virtual device
temp1:         +0.0°C
--
wsa884x-virtual-0
Adapter: Virtual device
temp1:         +0.0°C

Also reported as N/A before first amplifier power on.

After this change and initial wsa884x power on:

wsa884x-virtual-0
Adapter: Virtual device
temp1:        +39.0°C
--
wsa884x-virtual-0
Adapter: Virtual device
temp1:        +37.0°C

Tested on sm8550 only.

Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20250221044024.1207921-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03 13:03:09 +00:00
Peter Ujfalusi
4363f02a39
ASoC: Intel: sof_sdw: Fix unlikely uninitialized variable use in create_sdw_dailinks()
Initialize current_be_id to 0 to handle the unlikely case when there are
no devices connected to a DAI.
In this case create_sdw_dailink() would return without touching the passed
pointer to current_be_id.

Found by gcc -fanalyzer

Fixes: 59bf457d80 ("ASoC: intel: sof_sdw: Factor out SoundWire DAI creation")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250303065552.78328-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03 13:03:08 +00:00
Md Sadre Alam
7304d19090
spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
This driver implements support for the SPI-NAND mode of QCOM NAND Flash
Interface as a SPI-MEM controller with pipelined ECC capability.

Co-developed-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://patch.msgid.link/20250224111414.2809669-3-quic_mdalam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03 13:00:21 +00:00
Md Sadre Alam
fd6bc2ba41
spi: dt-bindings: Introduce qcom,spi-qpic-snand
Document the QPIC-SPI-NAND flash controller present in the IPQ SoCs.
It can work both in serial and parallel mode and supports typical
SPI-NAND page cache operations.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://patch.msgid.link/20250224111414.2809669-2-quic_mdalam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03 13:00:20 +00:00
Patrice Chotard
79b8a705e2
spi: stm32: Add OSPI driver
Add STM32 OSPI driver, it supports :
  - support sNOR / sNAND devices.
  - Three functional modes: indirect, automatic-status polling,
    memory-mapped.
  - Single-, dual-, quad-, and octal-SPI communication.
  - Dual-quad communication.
  - Single data rate (SDR).
  - DMA channel for indirect mode.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/20250219080059.367045-3-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03 13:00:14 +00:00
Patrice Chotard
bed97e3578
dt-bindings: spi: Add STM32 OSPI controller
Add device tree bindings for the STM32 OSPI controller.

Main features of the Octo-SPI controller :
  - support sNOR / sNAND / HyperRAM™ and HyperFlash™ devices.
  - Three functional modes: indirect, automatic-status polling,
    memory-mapped.
  - Up to 4 Gbytes of external memory can be addressed in indirect
    mode (per physical port and per CS), and up to 256 Mbytes in
    memory-mapped mode (combined for both physical ports and per CS).
  - Single-, dual-, quad-, and octal-SPI communication.
  - Dual-quad communication.
  - Single data rate (SDR) and double transfer rate (DTR).
  - Maximum target frequency is 133 MHz for SDR and 133 MHz for DTR.
  - Data strobe support.
  - DMA channel for indirect mode.
  - Double CS mapping that allows two external flash devices to be
    addressed with a single OCTOSPI controller mapped on a single
    OCTOSPI port.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250219080059.367045-2-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03 13:00:14 +00:00
Alexey Klimov
a02c42d41a
ASoC: codecs: wsa883x: Implement temperature reading and hwmon
Read temperature of the amplifier and expose it via hwmon interface, which
will be later used during calibration of speaker protection algorithms.
The method is the same as for wsa884x and therefore this is based on
Krzysztof Kozlowski's approach implemented in commit 6b99dc62d9 ("ASoC:
codecs: wsa884x: Implement temperature reading and hwmon").

Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s
Link: https://patch.msgid.link/20250221032141.1206902-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03 13:00:04 +00:00
Thorsten Blum
feb849404a
ASoC: SOF: Intel: hda-dai: Remove unnecessary bool conversion
Remove the unnecessary bool conversion and simplify the code.

Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250223202547.1795-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03 13:00:03 +00:00