The MIPS architecture's source files do not require <linux/fb.h>.
Remove the include statement.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Probe for & boot CPUs (cores & VPs) in secondary clusters (ie. not the
cluster that began booting Linux) when they are present in systems with
CM 3.5 or higher.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Chao-ying Fu <cfu@wavecomp.com>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In preparation for supporting multi-cluster systems, introduce a struct
cluster_boot_config as an extra layer in the boot configuration
maintained by the MIPS Coherent Processing System (CPS) SMP
implementation. For now only one struct cluster_boot_config will be
allocated & we'll simply defererence its core_config field to find the
struct core_boot_config array which can be used to boot as usual.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The pm-cps code has up until now used per-CPU variables indexed by core,
rather than CPU number, in order to share data amongst sibling CPUs (ie.
VPs/threads in a core). This works fine for single cluster systems, but
with multi-cluster systems a core number is no longer unique in the
system, leading to sharing between CPUs that are not actually siblings.
Avoid this issue by using per-CPU variables as they are more generally
used - ie. access them using CPU numbers rather than core numbers.
Sharing between siblings is then accomplished by:
- Assigning the same pointer to entries for each sibling CPU for the
nc_asm_enter & ready_count variables, which allow this by virtue of
being per-CPU pointers.
- Indexing by the first CPU set in a CPUs cpu_sibling_map in the case
of pm_barrier, for which we can't use the previous approach because
the per-CPU variable is not a pointer.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In multi-cluster MIPS I6500 systems there is a GIC in each cluster,
each with its own counter. When a cluster powers up the counter will
be stopped, with the COUNTSTOP bit set in the GIC_CONFIG register.
In single cluster systems, it has been fine to clear COUNTSTOP once
in gic_clocksource_of_init() to start the counter. In multi-cluster
systems, this will only have started the counter in the boot cluster,
and any CPUs in other clusters will find their counter stopped which
will break the GIC clock_event_device.
Resolve this by having CPUs clear the COUNTSTOP bit when they come
online, using the existing gic_starting_cpu() CPU hotplug callback. This
will allow CPUs in secondary clusters to ensure that the cluster's GIC
counter is running as expected.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Chao-ying Fu <cfu@wavecomp.com>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Rockchip 356x device-tree now supports GIC ITS. Move PCIe controller's
MSI to use ITS instead of MBI. This removes extra CPU overhead of handling
PCIe MBIs by letting GIC's ITS to serve the PCIe MSIs.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250216221634.364158-4-dmitry.osipenko@collabora.com
Rockchip 356x SoC's GIC has two hardware integration issues that
affect MSI functionality of the GIC. Previously, both these GIC
issues were worked around by using MBI for MSI instead of ITS
because kernel GIC driver didn't have necessary quirks.
First issue is about RK356x GIC not supporting programmable
shareability, while reporting it as supported in a GIC's feature
register. Rockchip assigned Erratum ID #3568001 for this issue. This
patch adds dma-noncoherent property to the GIC node, denoting that a SW
workaround is required for mitigating the issue.
Second issue is about GIC AXI master interface addressing limited to
the first 4GB of physical address space. Rockchip assigned Erratum
ID #3568002 for this issue.
Now that kernel supports quirks for both of the erratums, add
MSI controller node to RK356x device-tree.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250216221634.364158-3-dmitry.osipenko@collabora.com
Rockchip RK3566/RK3568 GIC600 integration has DDR addressing
limited to the first 32bit of physical address space. Rockchip
assigned Erratum ID #3568002 for this issue. Add driver quirk for
this Rockchip GIC Erratum.
Note, that the 0x0201743b GIC600 ID is not Rockchip-specific and is
common for many ARM GICv3 implementations. Hence, there is an extra
of_machine_is_compatible() check.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250216221634.364158-2-dmitry.osipenko@collabora.com
All users of the time releated parts of the vDSO are now using the generic
storage implementation. Remove the therefore unnecessary compatibility
accessor functions and symbols.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-18-13a4669dfc8c@linutronix.de
All users of the random vDSO are using the generic storage
implementation. Remove the now unnecessary compatibility accessor
functions and symbols.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-17-13a4669dfc8c@linutronix.de
The values are not used anymore.
Also the sanity checks performed by vdso2c can never trigger as they
only validate invariants already enforced by the linker script.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-16-13a4669dfc8c@linutronix.de
The generic storage implementation provides the same features as the
custom one. However it can be shared between architectures, making
maintenance easier.
This switch also moves the random state data out of the time data page.
The currently used hardcoded __VDSO_RND_DATA_OFFSET does not take into
account changes to the time data page layout.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-15-13a4669dfc8c@linutronix.de
The generic storage implementation provides the same features as the
custom one. However it can be shared between architectures, making
maintenance easier.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-14-13a4669dfc8c@linutronix.de
The generic storage implementation provides the same features as the
custom one. However it can be shared between architectures, making
maintenance easier.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-13-13a4669dfc8c@linutronix.de
The generic storage implementation provides the same features as the
custom one. However it can be shared between architectures, making
maintenance easier.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-12-13a4669dfc8c@linutronix.de
The generic storage implementation provides the same features as the
custom one. However it can be shared between architectures, making
maintenance easier.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-11-13a4669dfc8c@linutronix.de
The generic storage implementation provides the same features as the
custom one. However it can be shared between architectures, making
maintenance easier.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-10-13a4669dfc8c@linutronix.de
The generic storage implementation provides the same features as the
custom one. However it can be shared between architectures, making
maintenance easier.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-9-13a4669dfc8c@linutronix.de
The generic storage implementation provides the same features as the
custom one. However it can be shared between architectures, making
maintenance easier.
This switch also moves the random state data out of the time data page.
The currently used hardcoded __VDSO_RND_DATA_OFFSET does not take into
account changes to the time data page layout.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-8-13a4669dfc8c@linutronix.de
Some architectures need to expose architecture-specific data to the vDSO.
Enable the generic vDSO storage mechanism to both store and map this
data. Some architectures require more than a single page, like LoongArch,
so prepare for that usecase, too.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-7-13a4669dfc8c@linutronix.de
Extend the generic vDSO data storage with a page for the random state data.
The random state data is stored in a dedicated page, as the existing
storage page is only meant for time-related, time-namespace-aware data.
This simplifies to access logic to not need to handle time namespaces
anymore and also frees up more space in the time-related page.
In case further generic vDSO data store is required it can be added to
the random state page.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-6-13a4669dfc8c@linutronix.de
Historically each architecture defined their own way to store the vDSO
data page. Add a generic mechanism to provide storage for that page.
Furthermore this generic storage will be extended to also provide
uniform storage for *non*-time-related data, like the random state or
architecture-specific data. These will have their own pages and data
structures, so rename 'vdso_data' into 'vdso_time_data' to make that
split clear from the name.
Also introduce a new consistent naming scheme for the symbols related to
the vDSO, which makes it clear if the symbol is accessible from
userspace or kernel space and the type of data behind the symbol.
The generic fault handler contains an optimization to prefault the vvar
page when the timens page is accessed. This was lifted from s390 and x86.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-5-13a4669dfc8c@linutronix.de
As the Makefile is included into other Makefiles it can not be used to
define objects to be built from the current source directory.
However the generic datastore will introduce such a local source file.
Rename the included Makefile so it is clear how it is to be used and to
make room for a regular Makefile in lib/vdso/.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-4-13a4669dfc8c@linutronix.de
The vDSO implementation can only include headers from the vdso/
namespace. To enable the usage of the ALIGN() macro from the vDSO, move
linux/align.h to vdso/align.h wholly.
As the only dependency linux/const.h is only a wrapper around
vdso/const.h anyways adapt that dependency.
Also provide a compatibility wrapper linux/align.h.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-3-13a4669dfc8c@linutronix.de
The vclock pages are *after* the non-vclock pages. Currently there are both
two vclock and two non-vclock pages so the existing logic works by
accident. As soon as the number of pages changes it will break however.
This will be the case with the introduction of the generic vDSO data
storage.
Use a macro to keep the calculation understandable and in sync between
the linker script and mapping code.
Fixes: e93d2521b2 ("x86/vdso: Split virtual clock pages into dedicated mapping")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-1-13a4669dfc8c@linutronix.de
On X1E80100, there is a hardware bug in the register logic of the
IRQ_ENABLE_BANK register: While read accesses work on the normal address,
all write accesses must be made to a shifted address. Without a workaround
for this, the wrong interrupt gets enabled in the PDC and it is impossible
to wakeup from deep suspend (CX collapse). This has not caused problems so
far, because the deep suspend state was not enabled. A workaround is
required now since work is ongoing to fix this.
The PDC has multiple "DRV" regions, each one has a size of 0x10000 and
provides the same set of registers for a particular client in the system.
Linux is one the clients and uses DRV region 2 on X1E. Each "bank" inside
the DRV region consists of 32 interrupt pins that can be enabled using the
IRQ_ENABLE_BANK register:
IRQ_ENABLE_BANK[bank] = base + IRQ_ENABLE_BANK + bank * sizeof(u32)
On X1E, this works as intended for read access. However, write access to
most banks is shifted by 2:
IRQ_ENABLE_BANK_X1E[0] = IRQ_ENABLE_BANK[-2]
IRQ_ENABLE_BANK_X1E[1] = IRQ_ENABLE_BANK[-1]
IRQ_ENABLE_BANK_X1E[2] = IRQ_ENABLE_BANK[0] = IRQ_ENABLE_BANK[2 - 2]
IRQ_ENABLE_BANK_X1E[3] = IRQ_ENABLE_BANK[1] = IRQ_ENABLE_BANK[3 - 2]
IRQ_ENABLE_BANK_X1E[4] = IRQ_ENABLE_BANK[2] = IRQ_ENABLE_BANK[4 - 2]
IRQ_ENABLE_BANK_X1E[5] = IRQ_ENABLE_BANK[5] (this one works as intended)
The negative indexes underflow to banks of the previous DRV/client region:
IRQ_ENABLE_BANK_X1E[drv 2][bank 0] = IRQ_ENABLE_BANK[drv 2][bank -2]
= IRQ_ENABLE_BANK[drv 1][bank 5-2]
= IRQ_ENABLE_BANK[drv 1][bank 3]
= IRQ_ENABLE_BANK[drv 1][bank 0 + 3]
IRQ_ENABLE_BANK_X1E[drv 2][bank 1] = IRQ_ENABLE_BANK[drv 2][bank -1]
= IRQ_ENABLE_BANK[drv 1][bank 5-1]
= IRQ_ENABLE_BANK[drv 1][bank 4]
= IRQ_ENABLE_BANK[drv 1][bank 1 + 3]
Introduce a workaround for the bug by matching the qcom,x1e80100-pdc
compatible and apply the offsets as shown above:
- Bank 0...1: previous DRV region, bank += 3
- Bank 1...4: our DRV region, bank -= 2
- Bank 5: our DRV region, no fixup required
The PDC node in the device tree only describes the DRV region for the Linux
client, but the workaround also requires to map parts of the previous DRV
region to issue writes there. To maintain compatibility with old device
trees, obtain the base address of the preceeding region by applying the
-0x10000 offset. Note that this is also more correct from a conceptual
point of view:
It does not really make use of the other region; it just issues shifted
writes that end up in the registers of the Linux associated DRV region 2.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/all/20250218-x1e80100-pdc-hw-wa-v2-1-29be4c98e355@linaro.org
GPIOLIB supports the case when number of supported GPIOs can be read
from the device property. Enable this for drivers that are using
GPIO regmap layer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250213195621.3133406-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Move optional assignments down in the code, so they may use some values
from the (updated) struct gpio_chip later on.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250213195621.3133406-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Group ngpio_per_reg, reg_stride, and reg_mask_xlate assignments together
with the respective conditional for better understanding what's going on
in the code.
While at it, mark ngpio_per_reg as (Optional) in the kernel-doc
in accordance with what code actually does.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250213195621.3133406-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpiochip_get_ngpios() can be used in the cases where passed device
is not a provider of the certain property. Use fwnode instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250213195621.3133406-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
[BUG]
When running generic/418 with a btrfs whose block size < page size
(subpage cases), it always fails.
And the following minimal reproducer is more than enough to trigger it
reliably:
workload()
{
mkfs.btrfs -s 4k -f $dev > /dev/null
dmesg -C
mount $dev $mnt
$fsstree_dir/src/dio-invalidate-cache -r -b 4096 -n 3 -i 1 -f $mnt/diotest
ret=$?
umount $mnt
stop_trace
if [ $ret -ne 0 ]; then
fail
fi
}
for (( i = 0; i < 1024; i++)); do
echo "=== $i/$runtime ==="
workload
done
[CAUSE]
With extra trace printk added to the following functions:
- btrfs_buffered_write()
* Which folio is touched
* The file offset (start) where the buffered write is at
* How many bytes are copied
* The content of the write (the first 2 bytes)
- submit_one_sector()
* Which folio is touched
* The position inside the folio
* The content of the page cache (the first 2 bytes)
- pagecache_isize_extended()
* The parameters of the function itself
* The parameters of the folio_zero_range()
Which are enough to show the problem:
22.158114: btrfs_buffered_write: folio pos=0 start=0 copied=4096 content=0x0101
22.158161: submit_one_sector: r/i=5/257 folio=0 pos=0 content=0x0101
22.158609: btrfs_buffered_write: folio pos=0 start=4096 copied=4096 content=0x0101
22.158634: btrfs_buffered_write: folio pos=0 start=8192 copied=4096 content=0x0101
22.158650: pagecache_isize_extended: folio=0 from=4096 to=8192 bsize=4096 zero off=4096 len=8192
22.158682: submit_one_sector: r/i=5/257 folio=0 pos=4096 content=0x0000
22.158686: submit_one_sector: r/i=5/257 folio=0 pos=8192 content=0x0101
The tool dio-invalidate-cache will start 3 threads, each doing a buffered
write with 0x01 at offset 0, 4096 and 8192, do a fsync, then do a direct read,
and compare the read buffer with the write buffer.
Note that all 3 btrfs_buffered_write() are writing the correct 0x01 into
the page cache.
But at submit_one_sector(), at file offset 4096, the content is zeroed
out, by pagecache_isize_extended().
The race happens like this:
Thread A is writing into range [4K, 8K).
Thread B is writing into range [8K, 12k).
Thread A | Thread B
-------------------------------------+------------------------------------
btrfs_buffered_write() | btrfs_buffered_write()
|- old_isize = 4K; | |- old_isize = 4096;
|- btrfs_inode_lock() | |
|- write into folio range [4K, 8K) | |
|- pagecache_isize_extended() | |
| extend isize from 4096 to 8192 | |
| no folio_zero_range() called | |
|- btrfs_inode_lock() | |
| |- btrfs_inode_lock()
| |- write into folio range [8K, 12K)
| |- pagecache_isize_extended()
| | calling folio_zero_range(4K, 8K)
| | This is caused by the old_isize is
| | grabbed too early, without any
| | inode lock.
| |- btrfs_inode_unlock()
The @old_isize is grabbed without inode lock, causing race between two
buffered write threads and making pagecache_isize_extended() to zero
range which is still containing cached data.
And this is only affecting subpage btrfs, because for regular blocksize
== page size case, the function pagecache_isize_extended() will do
nothing if the block size >= page size.
[FIX]
Grab the old i_size while holding the inode lock.
This means each buffered write thread will have a stable view of the
old inode size, thus avoid the above race.
CC: stable@vger.kernel.org # 5.15+
Fixes: 5e8b9ef303 ("btrfs: move pos increment and pagecache extension to btrfs_buffered_write")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
If btrfs failed to locate the seed device for whatever reason, mounting
the sprouted device will fail without any meaning error message:
# mkfs.btrfs -f /dev/test/scratch1
# btrfstune -S1 /dev/test/scratch1
# mount /dev/test/scratch1 /mnt/btrfs
# btrfs dev add -f /dev/test/scratch2 /mnt/btrfs
# umount /mnt/btrfs
# btrfs dev scan -u
# btrfs mount /dev/test/scratch2 /mnt/btrfs
mount: /mnt/btrfs: fsconfig system call failed: No such file or directory.
dmesg(1) may have more information after failed mount system call.
# dmesg -t | tail -n6
BTRFS info (device dm-5): first mount of filesystem 64252ded-5953-4868-b962-cea48f7ac4ea
BTRFS info (device dm-5): using crc32c (crc32c-generic) checksum algorithm
BTRFS info (device dm-5): using free-space-tree
BTRFS error (device dm-5): failed to read chunk tree: -2
BTRFS error (device dm-5): open_ctree failed: -2
[CAUSE]
The failure to mount is pretty straight forward, just unable to find the
seed device and its fsid, caused by `btrfs dev scan -u`.
But the lack of any useful info is a problem.
[FIX]
Just add an extra error message in open_seed_devices() to indicate the
error.
Now the error message would look like this:
BTRFS info (device dm-4): first mount of filesystem 7769223d-4db1-4e4c-ac29-0a96f53576ab
BTRFS info (device dm-4): using crc32c (crc32c-generic) checksum algorithm
BTRFS info (device dm-4): using free-space-tree
BTRFS error (device dm-4): failed to find fsid e87c12e6-584b-4e98-8b88-962c33a619ff when attempting to open seed devices
BTRFS error (device dm-4): failed to read chunk tree: -2
BTRFS error (device dm-4): open_ctree failed: -2
Link: https://github.com/kdave/btrfs-progs/issues/959
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent map shrinker now runs in the system unbound workqueue and no
longer in kswapd context so it can directly do an iput() on inodes even
if that blocks or needs to acquire any lock (we aren't holding any locks
when requesting the delayed iput from the shrinker). So we don't need to
add a delayed iput, wake up the cleaner and delegate the iput() to the
cleaner, which also adds extra contention on the spinlock that protects
the delayed iputs list.
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Tested-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/0414d690ac5680d0d77dfc930606cdc36e42e12f.camel@intelfx.name/
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If there are inodes that don't have any loaded extent maps, we end up
grabbing a reference on them and later adding a delayed iput, which wakes
up the cleaner and makes it do unnecessary work. This is common when for
example the inodes were open only to run stat(2) or all their extent maps
were already released through the folio release callback
(btrfs_release_folio()) or released by a previous run of the shrinker, or
directories which never have extent maps.
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Tested-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/0414d690ac5680d0d77dfc930606cdc36e42e12f.camel@intelfx.name/
CC: stable@vger.kernel.org # 6.13+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_scan_root() we are accessing the inode's root (and fs_info) in a
call to btrfs_fs_closing() after we have scheduled the inode for a delayed
iput, and that can result in a use-after-free on the inode in case the
cleaner kthread does the iput before we dereference the inode in the call
to btrfs_fs_closing().
Fix this by using the fs_info stored already in a local variable instead
of doing inode->root->fs_info.
Fixes: 1020443840 ("btrfs: make the extent map shrinker run asynchronously as a work queue job")
CC: stable@vger.kernel.org # 6.13+
Tested-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/0414d690ac5680d0d77dfc930606cdc36e42e12f.camel@intelfx.name/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix the grammatical/spelling errors in sysctl/sysctl.sh.
This fixes all errors pointed out by codespell in the file.
Signed-off-by: Chandra Pratap <chandrapratap3519@gmail.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-rapidio-v1-1-0f47f4719683@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20250114-sysfs-const-bin_attr-qemu_fw_cfg-v1-1-76f525a3ee72@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-powerpc-v1-5-bbed8906f476@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-powerpc-v1-4-bbed8906f476@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-powerpc-v1-3-bbed8906f476@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-powerpc-v1-2-bbed8906f476@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241215-sysfs-const-bin_attr-pcmcia-v1-1-ebb82e47d834@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241222-sysfs-const-bin_attr-input-v1-1-1229dbe5ae71@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-habanalabs-v1-1-b35463197efb@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>