Make filter control also available through filter_type attributes which are
now standardized in main IIO ABI documentation.
Suggested-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/61a87b288552cad9e925a9af4eb33022d14a4617.1738680728.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad4130 driver exports in_voltageY-voltageZ_filter_mode and
in_voltage-voltage_filter_mode_available attributes to user space. A
previous patch merged the documentation for those attributes with the
documentation for filter_type/filter_type_available into sysfs-bus-iio.
Filter mode and filter type refer to the same feature which is the digital
filter applied over ADC samples. However, since datasheets use the term
`filter type` and ad4130 driver is the only one using filter_mode,
deprecate the filter_mode ABI in favor of filter_type and keep the docs
separate to avoid confusion and intricate attribute descriptions.
Fixes: 01bb12922b ("Documentation: ABI: added filter mode doc in sysfs-bus-iio")
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/c77b2d65f1115c1c394582f55944d6f685058f9c.1738680728.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
A previous patch added documentation for filter_type_available attributes.
However, the description for the value attribute (filter_type) was missing.
Add documentation for filter_type sysfs ABI.
Fixes: 01bb12922b ("Documentation: ABI: added filter mode doc in sysfs-bus-iio")
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/a8dbccac909e8d11e7d47561935a5575b1354d3a.1738680728.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If one or more of the 16 channels are enabled and the driver is not
aware of that, unexpected things happen because different channels are
used than intended. To prevent that, all channels should be disabled at
probe time. In Commit 4be339af33 ("iio: adc: ad7124: Disable all
channels at probe time") I intended do that, however only the channels
that are potentially used by the driver and not all channels are
disabled since then. So disable all 16 channels and not only the used
ones.
Also fix the same issue in the .disable_all() callback.
Fixes: 4be339af33 ("iio: adc: ad7124: Disable all channels at probe time")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250204115023.265813-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
REGCACHE_NONE is the default type of the cache when not provided.
Drop unneeded explicit assignment to it.
Note, it's defined to 0, and if ever be redefined, it will break
literally a lot of the drivers, so it very unlikely to happen.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250129152546.1798306-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
REGCACHE_NONE is the default type of the cache when not provided.
Drop unneeded explicit assignment to it.
Note, it's defined to 0, and if ever be redefined, it will break
literally a lot of the drivers, so it very unlikely to happen.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250129152546.1798306-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
REGCACHE_NONE is the default type of the cache when not provided.
Drop unneeded explicit assignment to it.
Note, it's defined to 0, and if ever be redefined, it will break
literally a lot of the drivers, so it very unlikely to happen.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250129152546.1798306-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some chips of the ad7173 family supports open wire detection.
Generate a level fault event whenever an external source is disconnected
from the system input on single conversions.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250127-ad4111_openwire-v5-2-ef2db05c384f@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a new event type to describe an hardware failure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250127-ad4111_openwire-v5-1-ef2db05c384f@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for selecting between single-ended and differential
reference input.
Input frequency boundaries are change based on the mode selected
(single-ended/differential).
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250127101026.5320-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The current scale is not ABI-compliant as it is just the sensor gain
instead of the value that acts as a multiplier to be applied to the raw
value (there is no offset).
Use the iio-gts helpers to obtain the proper scale values according to
the gain and integration time to match the resolution tables from the
datasheet and drop dedicated variables to store the current values of
the integration time, gain and resolution. When at it, use 'scale'
instead of 'gain' consistently for the get/set functions to avoid
misunderstandings.
Fixes: 7b779f573c ("iio: light: add driver for veml6030 ambient light sensor")
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20250127-veml6030-scale-v3-2-4f32ba03df94@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Export this function in preparation for the fix in veml6030.c, where the
total gain can be used to ease the calculation of the processed value of
the IIO_LIGHT channel compared to acquiring the scale in NANO.
Suggested-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20250127-veml6030-scale-v3-1-4f32ba03df94@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
APDS9160 is a combination of ALS and proximity sensors.
This patch add supports for:
- Intensity clear data and illuminance data
- Proximity data
- Gain control, rate control
- Event thresholds
Signed-off-by: Mikael Gonella-Bolduc <mgonellabolduc@dimonoff.com>
Link: https://patch.msgid.link/20250122-apds9160-driver-v5-2-5393be10279a@dimonoff.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add device tree bindings for APDS9160
Note: Using alternate email for maintainer
Signed-off-by: Mikael Gonella-Bolduc <mgonellabolduc@dimonoff.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250122-apds9160-driver-v5-1-5393be10279a@dimonoff.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Silicon Labs Si7210 is an I2C Hall effect magnetic position and
temperature sensor. The driver supports the following functionalities:
* reading the temperature measurements
* reading the magnetic field measurements in a single-shot mode
* choosing the magnetic field measurement scale (20 or 200 mT)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Link: https://patch.msgid.link/20250120215620.39766-3-apokusinski01@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Silicon Labs Si7210 is an I2C Hall effect magnetic position
and temperature sensor.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Link: https://patch.msgid.link/20250120215620.39766-2-apokusinski01@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The configuration registers are not volatile and are not affected
by read operations (i.e. not precious), making them suitable to be
cached in order to reduce the number of accesses to the device.
Add support for caching (RBTREE type).
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20250119-veml6030-scale-v2-2-6bfc4062a371@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for regfields as well to simplify register operations,
taking into account the different fields for the veml6030/veml7700 and
veml6035.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20250119-veml6030-scale-v2-1-6bfc4062a371@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The key objective in ad7124_disable_one() is clearing the
AD7124_CHANNEL_EN_MSK bit in the channel register. However there is no
advantage to keep the other bits in that register because when the
channel is used next time, all fields are rewritten anyhow. So instead
of using ad7124_spi_write_mask() (which is a register read plus a
register write) use a simple register write clearing the complete
register.
Also do the same in the .disable_all() callback by using the
.disable_one() callback there.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250120140708.1093655-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
IIO uses "natural" alignment so storagebits should always be a power of
2. Change storagebits to 32 since that is the natural size to store 24
bits of data.
The ad5791 driver currently doesn't use this field anywhere and doesn't
support buffered writes, so this does not change anything. We just don't
want anyone to think that it is OK to have storagebits = 24 in other
drivers.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250122-iio-dac-ad5791-fix-storagebits-v1-1-53746e0f25cd@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
For debugging, add tracing for EC_CMD_MOTION_SENSE_CMD command:
- decode the name of the subcommand
- provide internal information for the most common sub-commands:
setting range, frequency, EC probing frequency, ...
- display return status.
When enabled, the tracing output is similar to:
/sys/kernel/debug/tracing # echo 1 > events/cros_ec/enable ; echo 1 > tracing_on ; cat trace_pipe | grep MOTIONSENSE_CMD_SENSOR_ODR
SensorDeviceImp-814 [003] ..... 686.176782: cros_ec_motion_host_cmd: MOTIONSENSE_CMD_SENSOR_ODR, id: 1, data: 200000, result: 4, return: 12500
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20250121232007.1020666-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
A new FPGA HDL has been developed from ADI to support ad354xr
devices.
Add support for ad3541r and ad3542r with following additions:
- use common device_info structures for hs and non hs drivers,
- DMA buffering, use DSPI mode for ad354xr and QSPI for ad355xr,
- change sample rate to respect number of lanes.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250114-wip-bl-ad3552r-axi-v0-iio-testing-carlos-v4-8-979402e33545@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Preparing for new parts to be added also in the hs driver,
set model data structures in ad3552r-common.c, to be accessible
from both -hs and non hs driver.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250114-wip-bl-ad3552r-axi-v0-iio-testing-carlos-v4-7-979402e33545@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use "instruction" mode over initial configuration and all other
non-streaming operations.
DAC boots in streaming mode as default, and the driver is not
changing this mode.
Instruction r/w is still working because instruction is processed
from the DAC after chip select is deasserted, this works until
loop mode is 0 or greater than the instruction size.
All initial operations should be more safely done in instruction
mode, a mode provided for this.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250114-wip-bl-ad3552r-axi-v0-iio-testing-carlos-v4-6-979402e33545@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad354xr requires DSPI mode (2 data lanes) to work in buffering
mode, so, depending on the DAC type, target TRANSFER_REGISTER
"MULTI_IO_MODE" bitfield can be set between:
SPI (configuration, entire ad35xxr family),
DSPI (ad354xr),
QSPI (ad355xr).
Also bus IO_MODE must be set accordingly.
About removal of AXI_DAC_CUSTOM_CTRL_SYNCED_TRANSFER, according to
the HDL history the flag has never been used. So looks like the driver
was including it by mistake or in anticipation for something that was
never implemented on HDL side.
Current HDL updated documentation confirm it is actually not in use
anymore and replaced by the IO_MODE bits.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250114-wip-bl-ad3552r-axi-v0-iio-testing-carlos-v4-4-979402e33545@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Explicitly clear DEBUGCTL.LBR when a CPU is starting, prior to purging the
LBR MSRs themselves, as at least one system has been found to transfer
control to the kernel with LBRs enabled (it's unclear whether it's a BIOS
flaw or a CPU goof). Because the kernel preserves the original DEBUGCTL,
even when toggling LBRs, leaving DEBUGCTL.LBR as is results in running
with LBRs enabled at all times.
Closes: https://lore.kernel.org/all/c9d8269bff69f6359731d758e3b1135dedd7cc61.camel@redhat.com
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250131010721.470503-1-seanjc@google.com
The EAX of the CPUID Leaf 023H enumerates the mask of valid sub-leaves.
To tell the availability of the sub-leaf 1 (enumerate the counter mask),
perf should check the bit 1 (0x2) of EAS, rather than bit 0 (0x1).
The error is not user-visible on bare metal. Because the sub-leaf 0 and
the sub-leaf 1 are always available. However, it may bring issues in a
virtualization environment when a VMM only enumerates the sub-leaf 0.
Introduce the cpuid35_e?x to replace the macros, which makes the
implementation style consistent.
Fixes: eb467aaac2 ("perf/x86/intel: Support Architectural PerfMon Extension leaf")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250129154820.3755948-3-kan.liang@linux.intel.com
The PEBS-via-PT feature is exposed for the e-core of some hybrid
platforms, e.g., ADL and MTL. But it never works.
$ dmesg | grep PEBS
[ 1.793888] core: cpu_atom PMU driver: PEBS-via-PT
$ perf record -c 1000 -e '{intel_pt/branch=0/,
cpu_atom/cpu-cycles,aux-output/pp}' -C8
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (cpu_atom/cpu-cycles,aux-output/pp).
"dmesg | grep -i perf" may provide additional information.
The "PEBS-via-PT" is printed if the corresponding bit of per-PMU
capabilities is set. Since the feature is supported by the e-core HW,
perf sets the bit for e-core. However, for Intel PT, if a feature is not
supported on all CPUs, it is not supported at all. The PEBS-via-PT event
cannot be created successfully.
The PEBS-via-PT is no longer enumerated on the latest hybrid platform. It
will be deprecated on future platforms with Arch PEBS. Let's remove it
from the existing hybrid platforms.
Fixes: d9977c43bf ("perf/x86: Register hybrid PMUs")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250129154820.3755948-2-kan.liang@linux.intel.com
After the commit b4943b8bfc ("perf/x86/rapl: Add core energy counter
support for AMD CPUs"), the default "perf record"/"perf top" command is
broken in systems where there isn't a PMU registered for type
PERF_TYPE_RAW.
This is due to the change in order of error checks in rapl_pmu_event_init()
Due to which we return -EINVAL instead of -ENOENT, when we reach here from
the fallback loop in perf_init_event().
Move the "PMU and event type match" back to the beginning of the function
so that we return -ENOENT early on.
Closes: https://lore.kernel.org/all/uv7mz6vew2bzgre5jdpmwldxljp5djzmuiksqdcdwipfm4zm7w@ribobcretidk/
Fixes: b4943b8bfc ("perf/x86/rapl: Add core energy counter support for AMD CPUs")
Reported-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250129080513.30353-1-dhananjay.ugwekar@amd.com
Clarify that wake_up_q() does an atomic write to task->wake_q.next, after
which a concurrent __wake_q_add() can immediately overwrite
task->wake_q.next again.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250129-sched-wakeup-prettier-v1-1-2f51f5f663fa@google.com
The lld.ld borkage is fixed in the latest llvm release (?) but will
not be backported, meaning we're stuck with broken linker for a fair
while.
Lets not spam all clang build logs and move warning to verbose.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
The code was restructured where the function graph notrace code, that
would not trace a function and all its children is done by setting a
NOTRACE flag when the function that is not to be traced is hit.
There's a TRACE_GRAPH_NOTRACE_BIT which defines the bit in the flags and a
TRACE_GRAPH_NOTRACE which is the mask with that bit set. But the
restructuring used TRACE_GRAPH_NOTRACE_BIT when it should have used
TRACE_GRAPH_NOTRACE.
For example:
# cd /sys/kernel/tracing
# echo set_track_prepare stack_trace_save > set_graph_notrace
# echo function_graph > current_tracer
# cat trace
[..]
0) | __slab_free() {
0) | free_to_partial_list() {
0) | arch_stack_walk() {
0) | __unwind_start() {
0) 0.501 us | get_stack_info();
Where a non filter trace looks like:
# echo > set_graph_notrace
# cat trace
0) | free_to_partial_list() {
0) | set_track_prepare() {
0) | stack_trace_save() {
0) | arch_stack_walk() {
0) | __unwind_start() {
Where the filter should look like:
# cat trace
0) | free_to_partial_list() {
0) | _raw_spin_lock_irqsave() {
0) 0.350 us | preempt_count_add();
0) 0.351 us | do_raw_spin_lock();
0) 2.440 us | }
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250208001511.535be150@batman.local.home
Fixes: b84214890a ("function_graph: Move graph notrace bit to shadow stack global var")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When a weak pull-up is present on the SDO line, regmap_update_bits fails
to write both the SOFTRESET and SDOACTIVE bits because it incorrectly
reads them as already set.
Since the soft reset disables the SDO line, performing a
read-modify-write operation on ADI_SPI_CONFIG_A to enable the SDO line
doesn't make sense. This change directly writes to the register instead
of using regmap_update_bits.
Fixes: f34fe888ad ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/SA1P110MB106904C961B0F3FAFFED74C0BCF5A@SA1P110MB1069.NAMP110.PROD.OUTLOOK.COM
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Runtime PM is enabled as one of the last steps of probe(), so all
earlier gotos to "exit_free_device" label were not correct and were
leading to unbalanced runtime PM disable depth.
Fixes: 6e2fe01dd6 ("can: c_can: move runtime PM enable/disable to c_can_platform")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250112-syscon-phandle-args-can-v1-1-314d9549906f@linaro.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If skb allocation fails, the pointer to struct can_frame is NULL. This
is actually handled everywhere inside ctucan_err_interrupt() except for
the only place.
Add the missed NULL check.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Fixes: 2dcb8e8782 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250114152138.139580-1-pchelkin@ispras.ru
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The J1939 standard requires the transmission of messages of length 0.
For example proprietary messages are specified with a data length of 0
to 1785. The transmission of such messages is not possible. Sending
results in no error being returned but no corresponding can frame
being generated.
Enable the transmission of zero length J1939 messages. In order to
facilitate this two changes are necessary:
1) If the transmission of a new message is requested from user space
the message is segmented in j1939_sk_send_loop(). Let the segmentation
take into account zero length messages, do not terminate immediately,
queue the corresponding skb.
2) j1939_session_skb_get_by_offset() selects the next skb to transmit
for a session. Take into account that there might be zero length skbs
in the queue.
Signed-off-by: Alexander Hölzl <alexander.hoelzl@gmx.net>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250205174651.103238-1-alexander.hoelzl@gmx.net
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Cc: stable@vger.kernel.org
[mkl: commit message rephrased]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In the current struct sockaddr_can tp is member of can_addr. tp is not
member of struct sockaddr_can.
Signed-off-by: Reyders Morales <reyders1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20250203224720.42530-1-reyders1@gmail.com
Fixes: 67711e0425 ("Documentation: networking: document ISO 15765-2")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When a clock-controller lists multiple power-domains we need make each GDSC a
subdomain of each of the clock-controller's listed power-domains.
GDSCs without an explicitly defined parent should be a subdomain of each of
the clock-controller's listed power-domains.
GDSCs with an explicitly defined parent should attach only to the parent
GDSC and not the listed power-domains. Any votes will trickle through the
hierarchy up to the external power-domains.
========================================
:: arch/arm64/boot/dts/example.dtsi ::
========================================
clockcc: clock-controller@0 {
compat ="qcom,example-clockcc";
power-domains = <&pd_a, &pd_b>;
}
========================================
:: drivers/clk/qcom/example-clockcc.c ::
========================================
static struct gdsc parent_gdsc = {
.pd = {
.name = "parent_gdsc",
},
};
static struct gdsc child0_gdsc = {
.pd = {
.name = "child0_gdsc",
},
.parent = &parent_gdsc.pd,
};
static struct gdsc child1_gdsc = {
.pd = {
.name = "child1_gdsc",
},
.parent = &parent_gdsc.pd,
};
========================================
:: power-subdomains ::
========================================
pm-domain::pd_a
└── pm-subdomain::clockcc::parent_gdsc
├── pm-subdomain::clockcc::child0_gdsc
└── pm-subdomain::clockcc::child1_gdsc
pm-domain::pd_b
└── pm-subdomain::clockcc::parent_gdsc
├── pm-subdomain::clockcc::child1_gdsc
└── pm-subdomain::clockcc::child2_gdsc
The performance states will percolate through the pm-domain hierarchy to
the domains that handle the relevant states.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250117-b4-linux-next-24-11-18-clock-multiple-power-domains-v10-4-13f2bb656dad@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Right now we support one power-domain per clock controller.
These single power-domains are switched on by the driver platform logic.
However when we have multiple power-domains attached to a clock-controller
that list of power-domains must be handled outside of driver platform
logic.
Use devm_pm_domain_attach_list() to automatically hook the list of given
power-domains in the dtsi for the clock-controller driver.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20250117-b4-linux-next-24-11-18-clock-multiple-power-domains-v10-3-13f2bb656dad@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Adding a new clause to this if/else I noticed the existing usage of
pm_genpd_add_subdomain() wasn't capturing and returning the result code.
pm_genpd_add_subdomain() returns an int and can fail. Capture that result
code and throw it up the call stack if something goes wrong.
Fixes: 1b771839de ("clk: qcom: gdsc: enable optional power domain support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250117-b4-linux-next-24-11-18-clock-multiple-power-domains-v10-2-13f2bb656dad@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Update some RCGs on the sm8250 camera clock controller to use
clk_rcg2_shared_ops. The shared_ops ensure the RCGs get parked
to the XO during clock disable to prevent the clocks from locking up
when the GDSC is enabled. These mirror similar fixes for other controllers
such as commit e5c359f70e ("clk: qcom: camcc: Update the clock ops for
the SC7180").
Signed-off-by: Jordan Crouse <jorcrous@amazon.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250122222612.32351-1-jorcrous@amazon.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>