Populate the PCS supported_interfaces bitmap with the interfaces that
this PCS supports. This makes the manual checking in miic_validate()
redundant, so remove that.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tfhYq-003aTm-Nx@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A call to rtnl_nets_destroy() is needed to release references taken on
netns put in rtnl_nets.
CC: stable@vger.kernel.org
Fixes: 636af13f21 ("rtnetlink: Register rtnl_dellink() and rtnl_setlink() with RTNL_FLAG_DOIT_PERNET_WIP.")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205221037.2474426-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
John Daley says:
====================
enic: Use Page Pool API for receiving packets
Use the Page Pool API for RX. The Page Pool API improves bandwidth and
CPU overhead by recycling pages instead of allocating new buffers in the
driver. Also, page pool fragment allocation for smaller MTUs is used
allow multiple packets to share pages.
RX code was moved to its own file and some refactoring was done
beforehand to make the page pool changes more trasparent and to simplify
the resulting code.
====================
Link: https://patch.msgid.link/20250205235416.25410-1-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the move to using the Page Pool API for RX, rx copybreak was not
showing any improvement in host CPU overhead, latency or bandwidth so
the driver no longer makes use of the rx_copybreak setting. This patch
removes the ethtool tuneable hooks to set and get the rx copybreak since
they and now no-ops. Rx copybreak was the only tunable supported, so
remove the set and get tunable callbacks all together.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250205235416.25410-5-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Page Pool API improves bandwidth and CPU overhead by recycling pages
instead of allocating new buffers in the driver. Make use of page pool
fragment allocation for smaller MTUs so that multiple packets can share
a page. For MTUs larger than PAGE_SIZE, adjust the 'order' page
parameter so that contiguous pages can be used to receive the larger
packets.
The RQ descriptor field 'os_buf' is repurposed to hold page pointers
allocated from page_pool instead of SKBs. When packets arrive, SKBs are
allocated and the page pointers are attached instead of preallocating SKBs.
'alloc_fail' netdev statistic is incremented when page_pool_dev_alloc()
fails.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250205235416.25410-4-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Split up RX handler functions in preparation for moving
to a page pool based implementation.
No functional changes.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250205235416.25410-3-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move RX handler code into its own file in preparation for further
changes. Some formatting changes were necessary in order to satisfy
checkpatch but there were no functional changes.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250205235416.25410-2-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If an AX25 device is bound to a socket by setting the SO_BINDTODEVICE
socket option, a refcount leak will occur in ax25_release().
Commit 9fd75b66b8 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
added decrement of device refcounts in ax25_release(). In order for that
to work correctly the refcounts must already be incremented when the
device is bound to the socket. An AX25 device can be bound to a socket
by either calling ax25_bind() or setting SO_BINDTODEVICE socket option.
In both cases the refcounts should be incremented, but in fact it is done
only in ax25_bind().
This bug leads to the following issue reported by Syzkaller:
================================================================
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 1 PID: 5932 at lib/refcount.c:31 refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31
Modules linked in:
CPU: 1 UID: 0 PID: 5932 Comm: syz-executor424 Not tainted 6.13.0-rc4-syzkaller-00110-g4099a71718b0 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:336 [inline]
refcount_dec include/linux/refcount.h:351 [inline]
ref_tracker_free+0x710/0x820 lib/ref_tracker.c:236
netdev_tracker_free include/linux/netdevice.h:4156 [inline]
netdev_put include/linux/netdevice.h:4173 [inline]
netdev_put include/linux/netdevice.h:4169 [inline]
ax25_release+0x33f/0xa10 net/ax25/af_ax25.c:1069
__sock_release+0xb0/0x270 net/socket.c:640
sock_close+0x1c/0x30 net/socket.c:1408
...
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
================================================================
Fix the implementation of ax25_setsockopt() by adding increment of
refcounts for the new device bound, and decrement of refcounts for
the old unbound device.
Fixes: 9fd75b66b8 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
Reported-by: syzbot+33841dc6aa3e1d86b78a@syzkaller.appspotmail.com
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250203091203.1744-1-m.masimov@mt-integration.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are at least two cases where napi_id may not present and the
napi_id should be elided:
1. Queues could be created, but napi_enable may not have been called
yet. In this case, there may be a NAPI but it may not have an ID and
output of a napi_id should be elided.
2. TX-only NAPIs currently do not have NAPI IDs. If a TX queue happens
to be linked with a TX-only NAPI, elide the NAPI ID from the netlink
output as a NAPI ID of 0 is not useful for users.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250205193751.297211-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the netlink type for hardware timestamp flags, which are represented
as a bitset of flags. Although only one flag is supported currently, the
correct netlink bitset type should be used instead of u32 to keep
consistency with other fields. Address this by adding a new named string
set description for the hwtstamp flag structure.
The code has been introduced in the current release so the uAPI change is
still okay.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Fixes: 6e9e2eed4f ("net: ethtool: Add support for tsconfig command to get/set hwtstamp config")
Link: https://patch.msgid.link/20250205110304.375086-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Wei says:
====================
io_uring zero copy rx
This patchset contains net/ patches needed by a new io_uring request
implementing zero copy rx into userspace pages, eliminating a kernel
to user copy.
We configure a page pool that a driver uses to fill a hw rx queue to
hand out user pages instead of kernel pages. Any data that ends up
hitting this hw rx queue will thus be dma'd into userspace memory
directly, without needing to be bounced through kernel memory. 'Reading'
data out of a socket instead becomes a _notification_ mechanism, where
the kernel tells userspace where the data is. The overall approach is
similar to the devmem TCP proposal.
This relies on hw header/data split, flow steering and RSS to ensure
packet headers remain in kernel memory and only desired flows hit a hw
rx queue configured for zero copy. Configuring this is outside of the
scope of this patchset.
We share netdev core infra with devmem TCP. The main difference is that
io_uring is used for the uAPI and the lifetime of all objects are bound
to an io_uring instance. Data is 'read' using a new io_uring request
type. When done, data is returned via a new shared refill queue. A zero
copy page pool refills a hw rx queue from this refill queue directly. Of
course, the lifetime of these data buffers are managed by io_uring
rather than the networking stack, with different refcounting rules.
This patchset is the first step adding basic zero copy support. We will
extend this iteratively with new features e.g. dynamically allocated
zero copy areas, THP support, dmabuf support, improved copy fallback,
general optimisations and more.
In terms of netdev support, we're first targeting Broadcom bnxt. Patches
aren't included since Taehee Yoo has already sent a more comprehensive
patchset adding support in [1]. Google gve should already support this,
and Mellanox mlx5 support is WIP pending driver changes.
===========
Performance
===========
Note: Comparison with epoll + TCP_ZEROCOPY_RECEIVE isn't done yet.
Test setup:
* AMD EPYC 9454
* Broadcom BCM957508 200G
* Kernel v6.11 base [2]
* liburing fork [3]
* kperf fork [4]
* 4K MTU
* Single TCP flow
With application thread + net rx softirq pinned to _different_ cores:
+-------------------------------+
| epoll | io_uring |
|-----------|-------------------|
| 82.2 Gbps | 116.2 Gbps (+41%) |
+-------------------------------+
Pinned to _same_ core:
+-------------------------------+
| epoll | io_uring |
|-----------|-------------------|
| 62.6 Gbps | 80.9 Gbps (+29%) |
+-------------------------------+
=====
Links
=====
Broadcom bnxt support:
[1]: https://lore.kernel.org/20241003160620.1521626-8-ap420073@gmail.com
Linux kernel branch including io_uring bits:
[2]: https://github.com/isilence/linux.git zcrx/v13
liburing for testing:
[3]: https://github.com/isilence/liburing.git zcrx/next
kperf for testing:
[4]: https://git.kernel.dk/kperf.git
====================
Link: https://patch.msgid.link/20250204215622.695511-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add helpers that properly prep or remove a memory provider for an rx
queue then restart the queue.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-11-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add helpers for memory providers to interact with page pools.
net_mp_niov_{set,clear}_page_pool() serve to [dis]associate a net_iov
with a page pool. If used, the memory provider is responsible to match
"set" calls with "clear" once a net_iov is not going to be used by a page
pool anymore, changing a page pool, etc.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-10-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a good bunch of places in generic paths assuming that the only
page pool memory provider is devmem TCP. As we want to reuse the net_iov
and provider infrastructure, we need to patch it up and explicitly check
the provider type when we branch into devmem TCP code.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-9-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devmem TCP needs a hook in unregister_netdevice_many_notify() to upkeep
the set tracking queues it's bound to, i.e. ->bound_rxqs. Instead of
devmem sticking directly out of the genetic path, add a mp function.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-8-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a mandatory callback that prints information about the memory
provider to netlink.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-7-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A spin off from the original page pool memory providers patch by Jakub,
which allows extending page pools with custom allocators. One of such
providers is devmem TCP, and the other is io_uring zerocopy added in
following patches.
Link: https://lore.kernel.org/netdev/20230707183935.997267-7-kuba@kernel.org/
Co-developed-by: Jakub Kicinski <kuba@kernel.org> # initial mp proposal
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-5-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently net_iov stores a pointer to struct dmabuf_genpool_chunk_owner,
which serves as a useful abstraction to share data and provide a
context. However, it's too devmem specific, and we want to reuse it for
other memory providers, and for that we need to decouple net_iov from
devmem. Make net_iov to point to a new base structure called
net_iov_area, which dmabuf_genpool_chunk_owner extends.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add prefixes to all helpers that are specific to devmem TCP, i.e.
net_iov_binding[_id].
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-3-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
page_pool_check_memory_provider() is a generic path and shouldn't assume
anything about the actual type of the memory provider argument. It's
fine while devmem is the only provider, but cast away the devmem
specific binding types to avoid confusion.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of grabbing rcu_read_lock() from ip6_input_finish(),
do it earlier in is caller, so that ip6_input() access
to dev_net() can be validated by LOCKDEP.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250205155120.1676781-13-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
icmp6_send() must acquire rcu_read_lock() sooner to ensure
the dev_net() call done from a safe context.
Other ICMPv6 uses of dev_net() seem safe, change them to
dev_net_rcu() to get LOCKDEP support to catch bugs.
Fixes: 9a43b709a2 ("[NETNS][IPV6] icmp6 - make icmpv6_socket per namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250205155120.1676781-12-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_default_advmss() needs rcu protection to make
sure the net structure it reads does not disappear.
Fixes: 5578689a4e ("[NETNS][IPV6] route6 - make route6 per namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__skb_flow_dissect() can be called from arbitrary contexts.
It must extend its RCU protection section to include
the call to dev_net(), which can become dev_net_rcu().
This makes sure the net structure can not disappear under us.
Fixes: 9b52e3f267 ("flow_dissector: handle no-skb use case")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__ip_rt_update_pmtu() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: 2fbc6e89b2 ("ipv4: Update exception handling for multipath routes via same device")
Fixes: 1de6b15a43 ("Namespaceify min_pmtu sysctl")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250205155120.1676781-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
inet_select_addr() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: c4544c7243 ("[NETNS]: Process inet_select_addr inside a namespace.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250205155120.1676781-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rt_is_expired() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: e84f84f276 ("netns: place rt_genid into struct net")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv4_default_advmss() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: 2e9589ff80 ("ipv4: Namespaceify min_adv_mss sysctl knob")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip_dst_mtu_maybe_forward() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: f87c10a8aa ("ipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu spoofing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip4_dst_hoplimit() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: fa50d974d1 ("ipv4: Namespaceify ip_default_ttl sysctl knob")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev->nd_net can change, readers should either
use rcu_read_lock() or RTNL.
We currently use a generic helper, dev_net() with
no debugging support. We probably have many hidden bugs.
Add dev_net_rcu() helper for callers using rcu_read_lock()
protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using Rust on the x86 architecture, we are currently using the
unstable target.json feature to specify the compilation target. Rustc is
going to change how softfloat is specified in the target.json file on
x86, thus update generate_rust_target.rs to specify softfloat using the
new option.
Note that if you enable this parameter with a compiler that does not
recognize it, then that triggers a warning but it does not break the
build.
[ For future reference, this solves the following error:
RUSTC L rust/core.o
error: Error loading target specification: target feature
`soft-float` is incompatible with the ABI but gets enabled in
target spec. Run `rustc --print target-list` for a list of
built-in targets
- Miguel ]
Cc: <stable@vger.kernel.org> # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/136146
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Link: https://lore.kernel.org/r/20250203-rustc-1-86-x86-softfloat-v1-1-220a72a5003e@google.com
[ Added 6.13.y too to Cc: stable tag and added reasoning to avoid
over-backporting. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The Makefile.deps lists uAPI headers to make the build work when
system headers are older than in-tree headers. The problem doesn't
occur for new headers, because system headers are not there at all.
But out-of-tree YNL clone on GH also uses this header to identify
header dependencies, and one day the system headers will exist,
and will get out of date. So let's add the headers we missed.
I don't think this is a fix, but FWIW the commits which added
the missing headers are:
commit 04e65df94b ("netlink: spec: add shaper YAML spec")
commit 49922401c2 ("ethtool: separate definitions that are gonna be generated")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250205173352.446704-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The uretprobe syscall is implemented as a performance enhancement on
x86_64 by having the kernel inject a call to it on function exit; User
programs cannot call this system call explicitly.
As such, this syscall is considered a kernel implementation detail and
should not be filtered by seccomp.
Enhance the seccomp bpf test suite to check that uretprobes can be
attached to processes without the killing the process regardless of
seccomp policy.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20250202162921.335813-3-eyal.birger@gmail.com
[kees: Skip archs without __NR_uretprobe]
Signed-off-by: Kees Cook <kees@kernel.org>
Currently there are two ways of how we represent all bits set, i.e.
UINT_MAX and GENMASK(31, 0). Use the former as the single way of
doing that, which is crystal clear on how we fill the unsigned int
value.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250206191644.1132869-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Introduce new wrapper to present spcm related debug and error prints in
a unified way and provide additional details to help to understand the
reasons and configuration used when the log was captured.
Change the way we print information about the ipc4 copier module to
use type specific prints, again to provide better information for
debugging.
Merge series from Mohammad Rafi Shaik <quic_mohs@quicinc.com>:
Add static channel map support between soundwire master and slave.
Currently, the channel value for each soundwire port is hardcoded in the
wcd937x-sdw driver and the same channel value is configured in the
soundwire master.
The Qualcomm board like the QCM6490-IDP require static channel map
settings for the soundwire master and slave ports.
If another boards which are using enable wcd937x, the channel mapping
index values between master and slave may be different depending on the
board hw design and requirements. If the above properties are not used
in a SoC specific device tree, the channel mapping index values are set
to default.
With the introduction of the following channel mapping properties, it is
now possible to configure the master channel mapping directly from the
device tree.
Added qcom_swrm_set_channel_map api to set the master channel values
which allows more flexible to configure channel values in runtime for
specific active soundwire ports.
Add get and set channel maps support from codec to cpu dais in common
Qualcomm sdw driver.
Merge series from Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>:
cpcap audio codec found on cpcap PMIC supports headset detection
and PTT button through its 3.5 mm jack. This series implements
support for those capabilities.
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Each ASoC framwark is using own snd_xxx_ret() function, but we can share
these. This patch-set adds new snd_soc_ret() and use it.
checkpatch indicates that ENOTSUPP is not a SUSV4 error code, prefer to
use EOPNOTSUPP. So this patch-set adds it, but not remove existing ENOTSUPP.
Link: https://lore.kernel.org/r/8734gvsg5i.wl-kuninori.morimoto.gx@renesas.com
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The avs-driver is the go-to driver for Intel Automotive. MalibouLake
(MBL) and RedondoLake (RDL) are representatives of the project. These
inherit majority of the featureset from RaptorLake-M (RPL-M) and
AlderLake-N (ADL-N) respectively. The onboard codec for these is TI's
pcm3168a.
In summary, the patchset:
- modifies existing pcm3168a.c to be x86/ACPI friendly
- updates the DSP firmware booting sequence for cAVS 2.5 platforms to
improve its behaviour on some specific revisions/steppings of the
hardware
- adds new machine board driver, avs_pcm3168a
- adds selector entry for RPL-M devices in intel-dspcfg
While there 'ALSA: hda:' patch within the list, I'd prefer the patchset
to go through Mark's tree to avoid conflicts with follow ups to this
one.
Longer version:
Currently the pcm3168a is supported on ARM/DT (ti/j721e-evm.c being the
only user). To make it x86/ACPI friendly, add relevant ACPI-match table
and relax driver's probing conditions.
The default format is 2ch, 24-bits, 48000kHz. As per specification,
24-bits are supported by the chip and it works in production in contrary
to what the existing code suggests. A fix is provided to align the code
with the spec.
Now, a single DSP firmware binary covers a wide range of platforms - a
single one covers AlderLake, RaptorLake and all their derevatires except
for AlderLake-N based due to MEU differences. While most of the hardware
capabilities are read by the firmware during runtime, some information is
not accessible from the DSP level. Provide the HDAudio controller
revision/stepping information to the firmware to address that.
With that done, expand number of modules supported with WovHostModule
(WHM). WHM is a processing module which is tailored for ultra-low-power
scenarios. From software perspective, as most of its config is similar
to the Copier module, code reuse is advised. To make the reuse possible,
existing gateway configuration code is refactor - not only to add
support for WHM but also make it easier to understand. Multiple smaller
functions instead of all-in-one one.
-----BEGIN PGP SIGNATURE-----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=Nh1D
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- When saving a device's state, always save the upstream bridge's PM L1
Substates configuration as well because the bridge never saves its
own state, and restoring a device needs the state for both ends; this
was a regression that caused link and power management errors after
suspend/resume (Ilpo Järvinen)
- Correct TPH Control Register write, where we wrote the ST Mode where
the THP Requester Enable value was intended (Robin Murphy)
* tag 'pci-v6.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/TPH: Restore TPH Requester Enable correctly
PCI/ASPM: Fix L1SS saving
I'm stepping down as ath10k, ath11k and ath12k maintainer so remove me from
MAINTAINERS file and Device Tree bindings. Jeff continues as the maintainer.
As my quicinc.com email will not work anymore so add an entry to .mailmap file
to direct the mail to my kernel.org address.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jeff Johnson <jjohnson@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250203180445.1429640-1-kvalo@kernel.org