Uprev mesa to adapt to the latest changes in mesa ci
which includes new container jobs and stages. Also update
lava-submit script to adapt to the recent changes in mesa
to use LAVA rootfs overlays.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250205081652.1928927-2-vignesh.raman@collabora.com
Convert devicetree binding atmel-ssc.txt to YAML format.
Update the documentation supported file for MICROCHIP SSC DRIVER.
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250203091111.21667-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rt722 supports multi-lane and the driver doesn't call sdw_slave_read_prop()
to get all properties. Add sdw_slave_read_lane_mapping() to get the
required lane mapping property.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20250204075224.162661-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd driver supports Synchronous SRC Mode, but HW allow to update
rate only within 1% from current rate. Adjust to it.
Becially, this feature is used to fine-tune subtle difference that occur
during sampling rate conversion in SRC. So, it should be called within 1%
margin of rate difference.
If there was difference over 1%, it will apply with 1% increments by using
loop without indicating error message.
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://patch.msgid.link/871pwd2qe8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_kctrl_accept_runtime() (1) is used for runtime convert rate
(= Synchronous SRC Mode). Now, rsnd driver has 2 kctrls for it
(A): "SRC Out Rate Switch"
(B): "SRC Out Rate" // it calls (1)
(A): can be called anytime
(B): can be called only runtime, and will indicate warning if it was used
at non-runtime.
To use runtime convert rate (= Synchronous SRC Mode), user might uses
command in below order.
(X): > amixer set "SRC Out Rate" on
> aplay xxx.wav &
(Y): > amixer set "SRC Out Rate" 48010 // convert rate to 48010Hz
(Y): calls B
(X): calls both A and B.
In this case, when user calls (X), it calls both (A) and (B), but it is not
yet start running. So, (B) will indicate warning.
This warning was added by commit b5c0886898 ("ASoC: rsnd: add warning
message to rsnd_kctrl_accept_runtime()"), but the message sounds like the
operation was not correct. Let's update warning message.
The message is very SRC specific, implement it in src.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://patch.msgid.link/8734gt2qed.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It will indicate "unsupported clock rate" when setup clock failed.
But it is unclear what kind of rate was failed. Indicate it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://patch.msgid.link/874j192qej.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use freshly added API and add eld#n files to procfs for the ASoC cards
utilizing HDMI codec. This simplifies debugging of the possible ASoC /
HDMI / DisplayPort audio issues.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250124-alsa-hdmi-codec-eld-v1-2-bad045cfaeac@linaro.org
lola_restore_mixer() and lola_save_mixer() were added in 2011 by
commit d43f3010b8 ("ALSA: Add the driver for Digigram Lola
PCI-e boards")
but have remain unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250122022059.456068-1-linux@treblig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The internal mic boost on the Positivo ARN50 is too high.
Fix this by applying the ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine
to limit the gain.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20250201143930.25089-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
commit 90de551c1b ("ASoC: simple-card-utils.c: enable multi Component
support") added muiti Component support, but was missing to add
dlc->of_node. Because of it, Sound device list will indicates strange
name if it was DPCM connection and driver supports dai->driver->dai_args,
like below
> aplay -l
card X: sndulcbmix [xxxx], device 0: fe.(null).rsnd-dai.0 (*) []
... ^^^^^^
It will be fixed by this patch
> aplay -l
card X: sndulcbmix [xxxx], device 0: fe.sound@ec500000.rsnd-dai.0 (*) []
... ^^^^^^^^^^^^^^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/87ikpp2rtb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use string choices helpers to simplify the code.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501190707.qQS8PGHW-lkp@intel.com/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
kvfree_rcu() is batched for better performance except on TINY_RCU, which
is a simple implementation for small UP systems. Similarly SLUB_TINY is
an option intended for small systems, whether or not used together with
TINY_RCU. In case SLUB_TINY is used with !TINY_RCU, it makes arguably
sense to not do the batching and limit the memory footprint. It's also
suboptimal to have RCU-specific #ifdefs in slab code.
With that, add CONFIG_KVFREE_RCU_BATCHED to determine whether batching
kvfree_rcu() implementation is used. It is not set by a user prompt, but
enabled by default and disabled in case TINY_RCU or SLUB_TINY are
enabled.
Use the new config for #ifdef's in slab code and extend their scope to
cover all code used by the batched kvfree_rcu(). For example there's no
need to perform kvfree_rcu_init() if the batching is disabled.
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
RCU has been special-casing callback function pointers that are integers
lower than 4096 as offsets of rcu_head for kvfree() instead. The tree
RCU implementation no longer does that as the batched kvfree_rcu() is
not a simple call_rcu(). The tiny RCU still does, and the plan is also
to make tree RCU use call_rcu() for SLUB_TINY configurations.
Instead of teaching tree RCU again to special case the offsets, let's
remove the special casing completely. Since there's no SLOB anymore, it
is possible to create a callback function that can take a pointer to a
middle of slab object with unknown offset and determine the object's
pointer before freeing it, so implement that as kvfree_rcu_cb().
Large kmalloc and vmalloc allocations are handled simply by aligning
down to page size. For that we retain the requirement that the offset is
smaller than 4096. But we can remove __is_kvfree_rcu_offset() completely
and instead just opencode the condition in the BUILD_BUG_ON() check.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tree RCU does not handle kvfree_rcu() by queueing individual objects by
call_rcu() anymore, thus the tracepoint and associated
__is_kvfree_rcu_offset() check is dead code now. Remove it.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Following the move of TREE_RCU implementation, let's move also the
TINY_RCU one for consistency and subsequent refactoring.
For simplicity, remove the separate inline __kvfree_call_rcu() as
TINY_RCU is not meant for high-performance hardware anyway.
Declare kvfree_call_rcu() in rcupdate.h to avoid header dependency
issues.
Also move the kvfree_rcu_barrier() declaration to slab.h
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The counters snapshotting is a new adaptive PEBS extension, which can
capture programmable counters, fixed-function counters, and performance
metrics in a PEBS record. The feature is available in the PEBS format
V6.
The target counters can be configured in the new fields of MSR_PEBS_CFG.
Then the PEBS HW will generate the bit mask of counters (Counters Group
Header) followed by the content of all the requested counters into a
PEBS record.
The current Linux perf sample read feature can read all events in the
group when any event in the group is overflowed. But the rdpmc in the
NMI/overflow handler has a small gap from overflow. Also, there is some
overhead for each rdpmc read. The counters snapshotting feature can be
used as an accurate and low-overhead replacement.
Extend intel_update_topdown_event() to accept the value from PEBS
records.
Add a new PEBS_CNTR flag to indicate a sample read group that utilizes
the counters snapshotting feature. When the group is scheduled, the
PEBS configure can be updated accordingly.
To prevent the case that a PEBS record value might be in the past
relative to what is already in the event, perf always stops the PMU and
drains the PEBS buffer before updating the corresponding event->count.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250121152303.3128733-4-kan.liang@linux.intel.com
The event may have been updated in the PMU-specific implementation,
e.g., Intel PEBS counters snapshotting. The common code should not
read and overwrite the value.
The PERF_SAMPLE_READ in the data->sample_type can be used to detect
whether the PMU-specific value is available. If yes, avoid the
pmu->read() in the common code. Add a new flag, skip_read, to track the
case.
Factor out a perf_pmu_read() to clean up the code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250121152303.3128733-3-kan.liang@linux.intel.com
The WARN_ON(this_cpu_read(cpu_hw_events.enabled)) in the
intel_pmu_save_and_restart_reload() is triggered, when sampling read
topdown events.
In a NMI handler, the cpu_hw_events.enabled is set and used to indicate
the status of core PMU. The generic pmu->pmu_disable_count, updated in
the perf_pmu_disable/enable pair, is not touched.
However, the perf_pmu_disable/enable pair is invoked when sampling read
in a NMI handler. The cpuc->enabled is mistakenly set by the
perf_pmu_enable().
Avoid disabling PMU if the core PMU is already disabled.
Merge the logic together.
Fixes: 7b2c05a15d ("perf/x86/intel: Generic support for hardware TopDown metrics")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250121152303.3128733-2-kan.liang@linux.intel.com
The x86_pmu_drain_pebs static call was introduced in commit 7c9903c9bf
("x86/perf, static_call: Optimize x86_pmu methods"), but it's not really
used to replace the old method.
Apply the static call for drain_pebs.
Fixes: 7c9903c9bf ("x86/perf, static_call: Optimize x86_pmu methods")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250121152303.3128733-1-kan.liang@linux.intel.com
We need
4ba4f1afb6 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Having to synchronize the number of ctl_table array elements with the
size in the declaration can lead to discrepancies between the two
values. Since commit d7a76ec871 ("sysctl: Remove check for sentinel
element in ctl_table arrays"), the calculation of the ctl_table array
size is done solely by the ARRAY_SIZE macro removing the need for the
size in the declaration.
Remove the size for the aligment_tbl declaration and const qualify the
array for good measure.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Add the compatible for another 128Kb EEPROM from Giantec.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250203111429.22062-4-danila@jiaxyga.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add the compatible for another 64Kb EEPROM from Puya.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250203111429.22062-3-danila@jiaxyga.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Intel MID record is not listed all related files. Add to there
pin control and GPIO drivers along with HSU (High Speed UART)
and HSU DMA.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Mandate a minimum Hblank symbol cycle count between BlankingStart and
BlankingEnd in 8b/10b MST and 128b/132b mode.
v2: Affine calculation/updation of min HBlank to dp_mst (Jani)
v3: moved min_hblank from struct intel_dp to intel_crtc_state (Jani)
v4: use max/min functions, change intel_xx *intel_xx to intel_xx *xx
(Jani)
Limit hblank to 511 and accommodate BS/BE in calculated value
(Srikanth)
v5: Some spelling corrections (Suraj)
v6: Removed DP2.1 in comment as this is applicable for both DP2.1 and
DP1.4 (Suraj)
v7: crtc_state holds the logical values and the register value
computation is moved to mst_enable() (Jani)
v8: Limit max hblank to 0x10, disable min_hblank on mst_disable (Jani)
Bspec: 74379
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122-hblank-v9-1-90afda006685@intel.com
There is one access to the per-CPU rdp->gpwrap field in the
__note_gp_changes() function that does not use READ_ONCE(), but all other
accesses do use READ_ONCE(). When using the 8*TREE03 and CONFIG_NR_CPUS=8
configuration, KCSAN found no data races at that point. This is because
all calls to __note_gp_changes() hold rnp->lock, which excludes writes
to the rdp->gpwrap fields for all CPUs associated with that same leaf
rcu_node structure.
This commit therefore removes READ_ONCE() from rdp->gpwrap accesses
within the __note_gp_changes() function.
Signed-off-by: Zilin Guan <zilinguan811@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
This commit renames the rcu_report_exp_cpu_mult() function from "mask"
to "mask_in" and introduced a "mask" local variable to better support
upcoming event-tracing additions.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
The rcu_barrier_sched(), synchronize_sched(), and synchronize_rcu_bh()
RCU API members have been gone for many years. This commit therefore
removes non-historical instances of them.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
This commit wordsmiths the RCU_LAZY and RCU_LAZY_DEFAULT_OFF Kconfig
options' help text.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
This commit adds a description of the energy-efficiency delays that
call_rcu() can impose, along with a pointer to call_rcu_hurry() for
latency-sensitive kernel code.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
This commit causes the call_srcu() kernel-doc header to reference that
of call_rcu() for detailed memory-ordering guarantees.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
This commit documents the fact that a given RCU callback function can
repost itself.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Most of the this_cpu_*() operations may be used in preemptible code,
but not this_cpu_ptr(), and for good reasons. Therefore, better explain
the reasons and call out raw_cpu_ptr() as an alternative in certain very
special cases.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: <linux-doc@vger.kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Currently, stallwarn.rst does not mention the fact that timer bugs can
result in false-positive RCU CPU stall warnings. This commit therefore
adds this to the list.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
The existing logic would disable uniquification on an evlist or enable
it per evsel, this is unfortunate as uniquification is most needed
when events have the same name and so the whole evlist must be
considered. Change the initial disable uniquify on an evlist
processing to also set a needs_uniquify flag, for cases like the
matching event names. This must be done as an initial pass as
uniquification of an event name will change the behavior of the
check. Keep the per counter uniquification but now only uniquify event
names when the needs_uniquify flag is set.
Before this change a hwmon like temp1 wouldn't be uniquified and
afterwards it will (ie the PMU is added to the temp1 event's name).
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250201074320.746259-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Counter merging was added in commit 942c559339 ("perf stat: Add
perf_stat_merge_counters()"), however, it merges events with the same
name on different PMUs regardless of whether the different PMUs are
actually of the same type (ie they differ only in the suffix on the
PMU). For hwmon events there may be a temp1 event on every PMU, but
the PMU names are all unique and don't differ just by a suffix. The
merging is over eager and will merge all the hwmon counters together
meaning an aggregated and very large temp1 value is shown. The same
would be true for say cache events and memory controller events where
the PMUs differ but the event names are the same.
Fix the problem by correctly saying two PMUs alias when they differ
only by suffix.
Note, there is an overlap with evsel's merged_stat with aggregation
and the evsel's metric_leader where aggregation happens for metrics.
Fixes: 942c559339 ("perf stat: Add perf_stat_merge_counters()")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250201074320.746259-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Wildcard PMU naming will match a name like pmu_1 to a PMU name like
pmu_10 but not to a PMU name like pmu_2 as the suffix forms part of
the match. No suffix matching will match pmu_10 to either pmu_1 or
pmu_2. Add or rename matching functions on PMU to make it clearer what
kind of matching is being performed.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250201074320.746259-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>