On some systems, the same CPU (with the same APIC ID) is assigned a
different logical CPU id after commit ec9aedb2aa ("x86/acpi: Ignore
invalid x2APIC entries").
This means that Linux enumerates the CPUs in a different order, which
violates ACPI specification[1] that states:
"OSPM should initialize processors in the order that they appear in
the MADT"
The problematic commit parses all LAPIC entries before any x2APIC
entries, aiming to ignore x2APIC entries with APIC ID < 255 when valid
LAPIC entries exist. However, it disrupts the CPU enumeration order on
systems where x2APIC entries precede LAPIC entries in the MADT.
Fix this problem by:
1) Parsing LAPIC entries first without registering them in the
topology to evaluate whether valid LAPIC entries exist.
2) Restoring the MADT in order parser which invokes either the LAPIC
or the X2APIC parser function depending on the entry type.
The X2APIC parser still ignores entries < 0xff in case that #1 found
valid LAPIC entries independent of their position in the MADT table.
Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#madt-processor-local-apic-sapic-structure-entry-order
Cc: All applicable <stable@vger.kernel.org>
Reported-by: Jim Mattson <jmattson@google.com>
Closes: https://lore.kernel.org/all/20241010213136.668672-1-jmattson@google.com/
Fixes: ec9aedb2aa ("x86/acpi: Ignore invalid x2APIC entries")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Tested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20250117081420.4046737-1-rui.zhang@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
for 6.14, please pull the following:
- Stefan enables the pinctrl-based I2C mux driver which is used on
Raspberry Pi 4 based systems since we switched the Device Tree files
to use the i2c mux representation
-----BEGIN PGP SIGNATURE-----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=GSiU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=mQPW
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.14/defconfig-arm64' of https://github.com/Broadcom/stblinux into soc/defconfig
This pull request contains Broadcom ARM64-based SoCs defconfig updates
for 6.14, please pull the following:
- Stefan enables the pinctrl-based I2C mux driver which is used on
Raspberry Pi 4 based systems since we switched the Device Tree files
to use the i2c mux representation
* tag 'arm-soc/for-6.14/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Enable pinctrl-based I2C mux
Link: https://lore.kernel.org/r/20250123203302.1491843-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MediaTek (MTK) uses some unique tiled memory formats
for video decoding. Add these to the uapi drm_fourcc.h
so that we can use them in Mesa, GStreamer, and other
tools/libraries.
v2:
- Classify the modifier bits into categories and provide
room for expansion (Daniel S.)
Signed-off-by: Eric R. Smith <eric.smith@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219174929.126205-1-eric.smith@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
The XFS_IOC_EXCHANGE_RANGE ioctl with the XFS_EXCHANGE_RANGE_TO_EOF flag
operates on a range bounded by the end of the file. This means the
actual amount of blocks exchanged is derived from the inode size, which
is only stable with the IOLOCK (i_rwsem) held. Do that, it currently
calls remap_verify_area from inside the sb write protection which nests
outside the IOLOCK. But this makes fsnotify_file_area_perm which is
called from remap_verify_area unhappy when the kernel is built with
lockdep and the recently added CONFIG_FANOTIFY_ACCESS_PERMISSIONS
option.
Fix this by always calling remap_verify_area before taking the write
protection, and passing a 0 size to remap_verify_area similar to
the FICLONE/FICLONERANGE ioctls when they are asked to clone until
the file end.
(Note: the size argument gets passed to fsnotify_file_area_perm, but
then isn't actually used there).
Fixes: 9a64d9b310 ("xfs: introduce new file range exchange ioctl")
Cc: <stable@vger.kernel.org> # v6.10
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
There hasn't been anything like an io_length for a long time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When we call create(), lseek() and write() sequentially, offset != 0
cannot be used as a judgment condition for whether the file already
has extents.
Furthermore, when xfs_bmap_adjacent() has not given a better blkno,
it is not necessary to use exact EOF block allocation.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
fuse-over-io-uring uses existing functions to find requests based
on their unique id - make these functions non-static.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move 'struct fuse_copy_state' and fuse_copy_* functions
to fuse_dev_i.h to make it available for fuse-io-uring.
'copy_out_args()' is renamed to 'fuse_copy_out_args'.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD).
For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue
entries.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This change sets up FUSE operations to always have headers in
args.in_args[0], even for opcodes without an actual header.
This step prepares for a clean separation of payload from headers,
initially it is used by fuse-over-io-uring.
For opcodes without a header, we use a zero-sized struct as a
placeholder. This approach:
- Keeps things consistent across all FUSE operations
- Will help with payload alignment later
- Avoids future issues when header sizes change
Op codes that already have an op code specific header do not
need modification.
Op codes that have neither payload nor op code headers
are not modified either (FUSE_READLINK and FUSE_DESTROY).
FUSE_BATCH_FORGET already has the header in the right place,
but is not using fuse_copy_args - as -over-uring is currently
not handling forgets it does not matter for now, but header
separation will later need special attention for that op code.
Correct the struct fuse_args->in_args array max size.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
[Add several documentation updates I had missed after
renaming functions and also fixes 'make htmldocs'.]
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
These are needed by fuse-over-io-uring.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Another preparation patch, as this function will be needed by
fuse/dev.c and fuse/dev_uring.c.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This function is needed by fuse_uring.c to clean ring queues,
so make it non static. Especially in non-static mode the function
name 'end_requests' should be prefixed with fuse_
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A new controller driver, from Nuvoton, has been merged.
Bastien Curutchet has contributed a series improving the Davinci
controller driver, both on the organization of the code, but also on the
performance side. The binding has also been converted to yaml, received
a new OOB layout and now supports on-die ECC engines.
The Qualcomm controller driver has been deeply cleaned to extract some
parts of the code into a shared file with the Qualcomm SPI memory
controller.
Aside from these main changes, the Cadence binding has been converted to
yaml, the brcmnand controller driver has received a small fix, otherwise
some more minor changes have also made their way in.
* SPI NAND changes
The SPI NAND subsystem has seen a great improvement, with the advent of
DTR operations (DDR operations, which may be extended to the address
cycles). The first vendor driver to benefit from these improvements is
the Winbond driver.
A new manufacturer driver is added SkyHigh, with a new constraint for
the core, it is impossible to disable the on-die ECC engine.
A Foresee device is also now supported.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmeSyFIACgkQJWrqGEe9
VoQqiwgAvsHzKruJpqBDNvQpNnZ0itNh9jUqP2PJ0eQ7toj1vXZ2FUPMH7s4M3/E
KB5TJBIwLoSk59Un8DeTga1SuaHW37j3rWJeQUCR4jgNJ0OuYvFODfXO+4ZOXdS4
qm0prqALQsMBwrYJF8K19EoqUixraQ7WiEVhXmVN965ddYvAsW0E4VMLYg4qrnbB
dvGWe5phg+UEHhmcGXola/JX5yVIC7SeBPEao267ZuRAnLH1zZS1TdllrBF0Cpeg
vac1++i2E1xOkRCqaNipH2oRMiuM1L3BMPukK6pUy4InanXVT6WWm3ekqUEJARIs
JHD4N//Sl7snWpIUhjkVHy9F/7r4yA==
=m1w2
-----END PGP SIGNATURE-----
Merge tag 'nand/for-6.14' into mtd/next
* Raw NAND changes
A new controller driver, from Nuvoton, has been merged.
Bastien Curutchet has contributed a series improving the Davinci
controller driver, both on the organization of the code, but also on the
performance side. The binding has also been converted to yaml, received
a new OOB layout and now supports on-die ECC engines.
The Qualcomm controller driver has been deeply cleaned to extract some
parts of the code into a shared file with the Qualcomm SPI memory
controller.
Aside from these main changes, the Cadence binding has been converted to
yaml, the brcmnand controller driver has received a small fix, otherwise
some more minor changes have also made their way in.
* SPI NAND changes
The SPI NAND subsystem has seen a great improvement, with the advent of
DTR operations (DDR operations, which may be extended to the address
cycles). The first vendor driver to benefit from these improvements is
the Winbond driver.
A new manufacturer driver is added SkyHigh, with a new constraint for
the core, it is impossible to disable the on-die ECC engine.
A Foresee device is also now supported.
Notable changes:
- Add flash entries for Atmel AT25SF321, Spansion S28HL256T, S28HL02GT.
- Add support for vcc-supply regulators and their DT bindings.
- Drop mx25u25635f entry. The flash shares its ID with mx25u25645g and
both parts have an SFDP table. Removing their entry lets them be
driven by the generic SFDP-based driver.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQTlUWNzXGEo3bFmyIR4drqP028CQUCZ4VXbBQccHJhdHl1c2hA
a2VybmVsLm9yZwAKCRAR4drqP028Cb9+AQDDUObpSbXfSXCkk5pgGjPOocrKLjLc
gH8+426T1qO4/gEA0tgKfCSxqX6kL7gRGdyxbWRmilfqLDsi5jnn1z3Xtgc=
=ibVz
-----END PGP SIGNATURE-----
Merge tag 'spi-nor/for-6.14' into mtd/next
SPI NOR changes for 6.14
Notable changes:
- Add flash entries for Atmel AT25SF321, Spansion S28HL256T, S28HL02GT.
- Add support for vcc-supply regulators and their DT bindings.
- Drop mx25u25635f entry. The flash shares its ID with mx25u25645g and
both parts have an SFDP table. Removing their entry lets them be
driven by the generic SFDP-based driver.
futex_queue() -> __futex_queue() uses 'current' as the task to store in
the struct futex_q->task field. This is fine for synchronous usage of
the futex infrastructure, but it's not always correct when used by
io_uring where the task doing the initial futex_queue() might not be
available later on. This doesn't lead to any issues currently, as the
io_uring side doesn't support PI futexes, but it does leave a
potentially dangling pointer which is never a good idea.
Have futex_queue() take a task_struct argument, and have the regular
callers pass in 'current' for that. Meanwhile io_uring can just pass in
NULL, as the task should never be used off that path. In theory
req->tctx->task could be used here, but there's no point populating it
with a task field that will never be used anyway.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/22484a23-542c-4003-b721-400688a0d055@kernel.dk
hdmi5_core_handle_irqs() is a function that was copied from omapdss by
commit f76ee892a9 ("omapfb: copy omapdss & displays for omapfb")
but it wasn't used in the original anyway.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218020124.278925-1-linux@treblig.org
We added some locking to this function, but accidentally forgot to unlock
if zynqmp_dp_mode_configure() failed. Use a guard lock to fix it.
Fixes: a7d5eeaa57 ("drm: zynqmp_dp: Add locking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b4042bd9-c943-4738-a2e1-8647259137c6@stanley.mountain
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument. Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.
There is also no real benefit in printing errors on missing syscon
argument, because this is done just too late: runtime check on
static/build-time data. Dtschema and Devicetree bindings offer the
static/build-time check for this already.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250114145840.505459-2-krzysztof.kozlowski@linaro.org
For the state cache lookup xfrm_input_state_lookup() first disables
preemption, to remain on the CPU and then retrieves a per-CPU pointer.
Within the preempt-disable section it also acquires
netns_xfrm::xfrm_state_lock, a spinlock_t. This lock must not be
acquired with explicit disabled preemption (such as by get_cpu())
because this lock becomes a sleeping lock on PREEMPT_RT.
To remain on the same CPU is just an optimisation for the CPU local
lookup. The actual modification of the per-CPU variable happens with
netns_xfrm::xfrm_state_lock acquired.
Remove get_cpu() and use the state_cache_input on the current CPU.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Closes: https://lore.kernel.org/all/CAADnVQKkCLaj=roayH=Mjiiqz_svdf1tsC3OE4EC0E=mAD+L1A@mail.gmail.com/
Fixes: 81a331a0e7 ("xfrm: Add an inbound percpu state cache.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
It was observed that the first write to DKL PHY DP Mode
register was not taking effect, hence rewrite this register.
v2: Rename function [Mitul]
v3: Rename function [Jani]
v4: Add check for display ver 13 [Matt]
Co-developed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241226060632.213790-1-nemesa.garg@intel.com
- scx_bpf_now() added so that BPF scheduler can access the cached timestamp
in struct rq to avoid reading TSC multiple times within a locked
scheduling operation.
- Minor updates to the built-in idle CPU selection logic.
- tool/sched_ext updates and other misc changes.
Pulling sched_ext/for-6.14 into master causes a merge conflict between the
following two commits (first commit in master, second in for-6.14):
a2a3374c47 sched_ext: idle: Refresh idle masks during idle-to-idle transitions
9cf9aceed2 sched_ext: idle: use assign_cpu() to update the idle cpumask
static void update_builtin_idle(int cpu, bool idle)
{
<<<<<<< HEAD
if (idle)
cpumask_set_cpu(cpu, idle_masks.cpu);
else
cpumask_clear_cpu(cpu, idle_masks.cpu);
=======
int cpu = cpu_of(rq);
if (SCX_HAS_OP(update_idle) && !scx_rq_bypassing(rq)) {
SCX_CALL_OP(SCX_KF_REST, update_idle, cpu_of(rq), idle);
if (!static_branch_unlikely(&scx_builtin_idle_enabled))
return;
}
assign_cpu(cpu, idle_masks.cpu, idle);
>>>>>>> 987ce79b52
The first commit factored out update_builtin_idle() and the second replaced
cpumask_set/clear_cpu() calls with assign_cpu(). The conflict can be
resolved by taking the code from the first and then replacing the
cpumask_set/clear_cpu() calls with assign_cpu():
static void update_builtin_idle(int cpu, bool idle)
{
assign_cpu(cpu, idle_masks.cpu, idle);
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZ4/yjw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGc/3AQChJ2zxBLMtQOfNVWgqhAyatCnFquMncl/IeGAs
Sf4eawD/QHNWYBPx0nOFQS8RZNmUcXuEDeHMy+1MvTUaIDL5MQM=
=6t0t
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- scx_bpf_now() added so that BPF scheduler can access the cached
timestamp in struct rq to avoid reading TSC multiple times within a
locked scheduling operation.
- Minor updates to the built-in idle CPU selection logic.
- tool/sched_ext updates and other misc changes.
* tag 'sched_ext-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: fix kernel-doc warnings
sched_ext: Use time helpers in BPF schedulers
sched_ext: Replace bpf_ktime_get_ns() to scx_bpf_now()
sched_ext: Add time helpers for BPF schedulers
sched_ext: Add scx_bpf_now() for BPF scheduler
sched_ext: Implement scx_bpf_now()
sched_ext: Relocate scx_enabled() related code
sched_ext: Add option -l in selftest runner to list all available tests
sched_ext: Include remaining task time slice in error state dump
sched_ext: update scx_bpf_dsq_insert() doc for SCX_DSQ_LOCAL_ON
sched_ext: idle: small CPU iteration refactoring
sched_ext: idle: introduce check_builtin_idle_enabled() helper
sched_ext: idle: clarify comments
sched_ext: idle: use assign_cpu() to update the idle cpumask
sched_ext: Use str_enabled_disabled() helper in update_selcpu_topology()
sched_ext: Use sizeof_field for key_len in dsq_hash_params
tools/sched_ext: Receive updates from SCX repo
sched_ext: Use the NUMA scheduling domain for NUMA optimizations
High refresh rate panels which may have small line times
and vblank sizes, Check if vblank size is sufficient for
dsc prefill latency.
--v2:
- Consider chroma downscaling factor in latency calculation. [Ankit]
- Replace with appropriate function name.
--v3:
- Remove FIXME tag.[Ankit]
- Replace Ycbcr444 to Ycbcr420.[Ankit]
- Correct precision. [Ankit]
- Use some local valiables like linetime_factor and latency to
adjust precision.
- Declare latency to 0 initially to avoid returning any garbage values.
- Account for second scaler downscaling factor as well. [Ankit]
--v4:
- Improvise hscale and vscale calculation. [Ankit]
- Use appropriate name for number of scaler users. [Ankit]
- Update commit message and rebase.
- Add linetime and cdclk prefill adjustment calculation. [Ankit]
--v5:
- Update bspec link in trailer. [Ankit]
- Correct hscale, vscale datatype. [Ankit]
- Use intel_crtc_compute_min_cdclk. [Ankit]
--v6:
- Use cdclk_state->logical.cdclk instead of
intel_crtc_compute_min_cdclk. [Ankit]
--v7:
- Fix linetime calculation. [Ankit]
- Reduce redandancy use of variables. [Ankit]
- Fix typos. [Ankit]
- Update calculation for precision. [Ankit]
--v8:
- Initialise variable to return garbage later. [Ankit]
- Initialise few variables to use at local loop, where
it is used. [Ankit]
Bspec: 70151
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120172209.188488-8-mitulkumar.ajitkumar.golani@intel.com
High refresh rate panels which may have small line times
and vblank sizes, Check if vblank size is sufficient for
enabled scaler users.
--v2:
- Use hweight* family of functions for counting bits. [Jani]
- Update precision handling for hscale and vscale. [Ankit]
- Consider chroma downscaling factor during latency
calculation. [Ankit]
- Replace function name from scaler_prefill_time to
scaler_prefill_latency.
--v3:
- hscale_k and vscale_k values are already left shifted
by 16, after multiplying by 1000, those need to be right
shifted to 16. [Ankit]
- Replace YCBCR444 to YCBCR420. [Ankit]
- Divide by 1000 * 1000 in end to get correct precision. [Ankit]
- Initialise latency to 0 to avoid any garbage.
--v4:
- Elaborate commit message and add Bspec number. [Ankit]
- Improvise latency calculation. [Ankit]
- Use ceiling value for down scaling factor when less than 1
as per bspec. [Ankit]
- Correct linetime calculation. [Ankit]
- Consider cdclk prefill adjustment while prefill
computation.[Ankit]
--v5:
- Add Bspec link in commit message trailer. [Ankit]
- Correct hscale, vscale data type.
- Use intel_crtc_compute_min_cdclk. [Ankit]
--v6:
- Update FIXME comment.
- Use cdclk_state->logical.cdclk instead of
intel_crtc_compute_min_cdclk. [Ankit]
--v7:
- Handle error return from cdclk_prefill_adjustment. [Ankit]
- Avoid incorrect round off for linetime. [Ankit]
- Correct precision. [Ankit]
--v8:
- Remove redundancy calculation added from previous patch. [Ankit]
Bspec: 70151
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120172209.188488-7-mitulkumar.ajitkumar.golani@intel.com
Limit downscaling to less than 1.5 (source/destination) in
the horizontal direction and 1.0 in the vertical direction,
When configured for Pipe YUV 420 encoding for port output.
Bspec: 50441, 7490, 69901
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120172209.188488-6-mitulkumar.ajitkumar.golani@intel.com
Compute scaling factors and scaler user for pipe scaler if
particular scaler user is pipe scaler.
--v2:
- Fix typos. [Ankit]
- Remove FIXME tag. [Ankit]
- Should be common hscale, vscale instead of local one to
avoid garbage overwritten.
--v3:
- Separate out max_scaling information. [Ankit]
- Use max_hscale and max_vscale info instead of INT_MAX. [Ankit]
--v4:
- Add Suggested changes reported by Dan Carpenter.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121175856.447245-1-mitulkumar.ajitkumar.golani@intel.com
Pass crtc_state to intel_atomic_setup_scaler, this will help to
check if pch_pfit enabled or not and also will be useful to pass
scaler_state with the same which will be used later to store
hscale and vscale values.
-- v2:
- Fix typos. (Ankit)
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120172209.188488-3-mitulkumar.ajitkumar.golani@intel.com
Add scaling factors to scaler_state for a particular scaler user.
These factors will be used later to compute scaler prefill latency.
Currently, only plane scaling factors are stored, but the same members
can later be extended to store pipe scaling factors as well.
--v2:
- Rephrase commit message. [Ankit]
- Corrects typos. [Ankit]
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120172209.188488-2-mitulkumar.ajitkumar.golani@intel.com
We rely on stream->pollin to decide whether or not to block during
poll/read calls. However, currently there are blocking read code paths
which don't even set stream->pollin. The best place to consistently set
stream->pollin for all code paths is therefore to set it in
xe_oa_buffer_check_unlocked.
Fixes: e936f885f1 ("drm/xe/oa/uapi: Expose OA stream fd")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115222029.3002103-1-ashutosh.dixit@intel.com
- Have emulating atomic64 use arch_spin_locks instead of raw_spin_locks
The tracing ring buffer events have a small timestamp that holds the
delta between itself and the event before it. But this can be tricky
to update when interrupts come in. It originally just set the deltas
to zero for events that interrupted the adding of another event which
made all the events in the interrupt have the same timestamp as the
event it interrupted. This was not suitable for many tools, so it
was eventually fixed. But that fix required adding an atomic64 cmpxchg
on the timestamp in cases where an event was added while another
event was in the process of being added.
Originally, for 32 bit architectures, the manipulation of the 64 bit
timestamp was done by a structure that held multiple 32bit words to hold
parts of the timestamp and a counter. But as updates to the ring buffer
were done, maintaining this became too complex and was replaced by the
atomic64 generic operations which are now used by both 64bit and 32bit
architectures. Shortly after that, it was reported that riscv32 and
other 32 bit architectures that just used the generic atomic64 were
locking up. This was because the generic atomic64 operations defined in
lib/atomic64.c uses a raw_spin_lock() to emulate an atomic64 operation.
The problem here was that raw_spin_lock() can also be traced by the
function tracer (which is commonly used for debugging raw spin locks).
Since the function tracer uses the tracing ring buffer, which now is being
traced internally, this was triggering a recursion and setting off a
warning that the spin locks were recusing.
There's no reason for the code that emulates atomic64 operations to be
using raw_spin_locks which have a lot of debugging infrastructure attached
to them (depending on the config options). Instead it should be using
the arch_spin_lock() which does not have any infrastructure attached to
them and is used by low level infrastructure like RCU locks, lockdep
and of course tracing. Using arch_spin_lock()s fixes this issue.
- Do not trace in NMI if the architecture uses emulated atomic64 operations
Another issue with using the emulated atomic64 operations that uses
spin locks to emulate the atomic64 operations is that they cannot be
used in NMI context. As an NMI can trigger while holding the atomic64
spin locks it can try to take the same lock and cause a deadlock.
Have the ring buffer fail recording events if in NMI context and the
architecture uses the emulated atomic64 operations.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ5Jr7RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qg7cAPoD/H4BRsFa3UUDnxofTlBuj4A7neJd
rk9ddD9HXH8KywEAhBn1Oujiw81Ayjx7E6s4ednAQX4rldTXBXDyFNuuGgU=
=b13F
-----END PGP SIGNATURE-----
Merge tag 'trace-ringbuffer-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull trace fing buffer fix from Steven Rostedt:
"Fix atomic64 operations on some architectures for the tracing ring
buffer:
- Have emulating atomic64 use arch_spin_locks instead of
raw_spin_locks
The tracing ring buffer events have a small timestamp that holds
the delta between itself and the event before it. But this can be
tricky to update when interrupts come in. It originally just set
the deltas to zero for events that interrupted the adding of
another event which made all the events in the interrupt have the
same timestamp as the event it interrupted. This was not suitable
for many tools, so it was eventually fixed. But that fix required
adding an atomic64 cmpxchg on the timestamp in cases where an event
was added while another event was in the process of being added.
Originally, for 32 bit architectures, the manipulation of the 64
bit timestamp was done by a structure that held multiple 32bit
words to hold parts of the timestamp and a counter. But as updates
to the ring buffer were done, maintaining this became too complex
and was replaced by the atomic64 generic operations which are now
used by both 64bit and 32bit architectures. Shortly after that, it
was reported that riscv32 and other 32 bit architectures that just
used the generic atomic64 were locking up. This was because the
generic atomic64 operations defined in lib/atomic64.c uses a
raw_spin_lock() to emulate an atomic64 operation. The problem here
was that raw_spin_lock() can also be traced by the function tracer
(which is commonly used for debugging raw spin locks). Since the
function tracer uses the tracing ring buffer, which now is being
traced internally, this was triggering a recursion and setting off
a warning that the spin locks were recusing.
There's no reason for the code that emulates atomic64 operations to
be using raw_spin_locks which have a lot of debugging
infrastructure attached to them (depending on the config options).
Instead it should be using the arch_spin_lock() which does not have
any infrastructure attached to them and is used by low level
infrastructure like RCU locks, lockdep and of course tracing. Using
arch_spin_lock()s fixes this issue.
- Do not trace in NMI if the architecture uses emulated atomic64
operations
Another issue with using the emulated atomic64 operations that uses
spin locks to emulate the atomic64 operations is that they cannot
be used in NMI context. As an NMI can trigger while holding the
atomic64 spin locks it can try to take the same lock and cause a
deadlock.
Have the ring buffer fail recording events if in NMI context and
the architecture uses the emulated atomic64 operations"
* tag 'trace-ringbuffer-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
atomic64: Use arch_spin_locks instead of raw_spin_locks
ring-buffer: Do not allow events in NMI with generic atomic64 cmpxchg()
The calltime and rettime were used by the function graph tracer to
calculate the timings of functions where it traced their entry and exit.
The calltime and rettime were stored in the generic structures that
were used for the mechanisms to add an entry and exit callback.
Now that function graph infrastructure is used by other subsystems than
just the tracer, the calltime and rettime are not needed for them.
Remove the calltime and rettime from the generic fgraph infrastructure
and have the callers that require them handle them.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ5Jk2BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qr3GAQCtzSX6PYTliZKm/Wa5zhebopwhGKEb
Mv0VZejaxYu0hgEA5O57J676FAOaQ7BLzoMojKFhR8RZ6LadKR5r7A0Qzgc=
=Bb/r
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull fgraph updates from Steven Rostedt:
"Remove calltime and rettime from fgraph infrastructure
The calltime and rettime were used by the function graph tracer to
calculate the timings of functions where it traced their entry and
exit. The calltime and rettime were stored in the generic structures
that were used for the mechanisms to add an entry and exit callback.
Now that function graph infrastructure is used by other subsystems
than just the tracer, the calltime and rettime are not needed for
them. Remove the calltime and rettime from the generic fgraph
infrastructure and have the callers that require them handle them"
* tag 'ftrace-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Remove calltime and rettime from generic operations
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in the
error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Update the Rust tracepoint code to use the C code too
There was some duplication of the tracepoint code for Rust that did the
same logic as the C code. Add a helper that makes it possible for both
algorithms to use the same logic in one place.
- Add poll to trace event hist files
It is useful to know when an event is triggered, or even with some
filtering. Since hist files of events get updated when active and the
event is triggered, allow applications to poll the hist file and wake up
when an event is triggered. This will let the application know that the
event it is waiting for happened.
- Add :mod: command to enable events for current or future modules
The function tracer already has a way to enable functions to be traced in
modules by writing ":mod:<module>" into set_ftrace_filter. That will
enable either all the functions for the module if it is loaded, or if it
is not, it will cache that command, and when the module is loaded that
matches <module>, its functions will be enabled. This also allows init
functions to be traced. But currently events do not have that feature.
Add the command where if ':mod:<module>' is written into set_event, then
either all the modules events are enabled if it is loaded, or cache it so
that the module's events are enabled when it is loaded. This also works
from the kernel command line, where "trace_event=:mod:<module>", when the
module is loaded at boot up, its events will be enabled then.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ5EbMxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qkZsAP9Amgx9frSbR1pn1t0I3wVnQx7khgOu
s/b8Ro+vjTx1/QD/RN2AA7f+HK4F27w3Aqfrs0nKXAPtXWsJ9Epp8raG5w8=
=Pg+4
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Update the Rust tracepoint code to use the C code too
There was some duplication of the tracepoint code for Rust that did
the same logic as the C code. Add a helper that makes it possible for
both algorithms to use the same logic in one place.
- Add poll to trace event hist files
It is useful to know when an event is triggered, or even with some
filtering. Since hist files of events get updated when active and the
event is triggered, allow applications to poll the hist file and wake
up when an event is triggered. This will let the application know
that the event it is waiting for happened.
- Add :mod: command to enable events for current or future modules
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Add the command where if ':mod:<module>' is written into set_event,
then either all the modules events are enabled if it is loaded, or
cache it so that the module's events are enabled when it is loaded.
This also works from the kernel command line, where
"trace_event=:mod:<module>", when the module is loaded at boot up,
its events will be enabled then.
* tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
tracing: Fix output of set_event for some cached module events
tracing: Fix allocation of printing set_event file content
tracing: Rename update_cache() to update_mod_cache()
tracing: Fix #if CONFIG_MODULES to #ifdef CONFIG_MODULES
selftests/ftrace: Add test that tests event :mod: commands
tracing: Cache ":mod:" events for modules not loaded yet
tracing: Add :mod: command to enabled module events
selftests/tracing: Add hist poll() support test
tracing/hist: Support POLLPRI event for poll on histogram
tracing/hist: Add poll(POLLIN) support on hist file
tracing: Fix using ret variable in tracing_set_tracer()
tracepoint: Reduce duplication of __DO_TRACE_CALL
tracing/string: Create and use __free(argv_free) in trace_dynevent.c
tracing: Switch trace_stat.c code over to use guard()
tracing: Switch trace_stack.c code over to use guard()
tracing: Switch trace_osnoise.c code over to use guard() and __free()
tracing: Switch trace_events_synth.c code over to use guard()
tracing: Switch trace_events_filter.c code over to use guard()
tracing: Switch trace_events_trigger.c code over to use guard()
tracing: Switch trace_events_hist.c code over to use guard()
...
- Fix use of KERNEL_VERSION in newly created output directory
If a new output directory is created (O=/dir), and one of the options uses
KERNEL_VERSION which will run a "make kernelversion" in the output
directory, it will fail because there is no config file yet. In this case,
have it do a "make allnoconfig" which is the minimal needed to run the
"make kernelversion".
- Remove unused variables
- Fix some typos
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ5AsqBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlfJAQCmRlwC8x+AVy2lij2sTqM8nfB7DfTF
QMavz/I1xn0f3wD/bxVfN8SebrCBBiICW09bvnWzqzyzgFsjjxRRq+Zzvwc=
=qfZn
-----END PGP SIGNATURE-----
Merge tag 'ktest-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Fix use of KERNEL_VERSION in newly created output directory
If a new output directory is created (O=/dir), and one of the options
uses KERNEL_VERSION which will run a "make kernelversion" in the
output directory, it will fail because there is no config file yet.
In this case, have it do a "make allnoconfig" which is the minimal
needed to run the "make kernelversion".
- Remove unused variables
- Fix some typos
* tag 'ktest-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Fix typo "accesing"
ktest.pl: Fix typo in comment
ktest.pl: Remove unused declarations in run_bisect_test function
ktest.pl: Check kernelrelease return in get_version
- kprobes: Cleanups using guard() and __free(): Use cleanup.h macros
to cleanup code and remove all gotos from kprobes code. This work
includes below changes.
. kprobes: Adopt guard() and scoped_guard()
. jump_label: Define guard() for jump_label_lock
. kprobes: Use guard() for external locks
. kprobes: Use guard for rcu_read_lock
. kprobes: Remove unneeded goto
. kprobes: Remove remaining gotos
- tracing/probes: Also cleanups tracing/*probe events code with guard()
and __free(). These patches are just to simplify the parser codes.
This work includes below changes.
. tracing/kprobe: Adopt guard() and scoped_guard()
. tracing/uprobe: Adopt guard() and scoped_guard()
. tracing/eprobe: Adopt guard() and scoped_guard()
. tracing: Use __free() in trace_probe for cleanup
. tracing: Use __free() for kprobe events to cleanup
. tracing/kprobes: Simplify __trace_kprobe_create() by removing gotos
- kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
This reduces preempt disable time only when getting the module
refcount in check_kprobe_access_safe(). Previously it disabled
preempt needlessly for other checks including
jump_label_text_reserved(), but it took long time because of
the linear search.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmeNy8kbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b/UoIAMYX8pYtLMZjokKSlsnN
Y3rMZecFJNKfXeA62YazpESO9n+BYyqj/Zj25Ws4YzdfnoT4kGtMuoUCS7d5U3lo
RZO/a7i3TgrzQdWbRwBz7l75h+FnCAsrSoLGoH/sQxXUP+p/2C6GJG3O3A/0qMaS
TPp7/nsR78P7MSf6Yr/ODZj0UWMSX6a6QNrzwloiMUjY6aPxz7K1on9cdzMF2QPE
fgtJk+JbCn9nLOJi/SVlO+wu4EfdKrfT7sqz9taNX/eQYmx2O9fE3R92Qvhxh79r
MrqcrMfcwfWtX+yD1kb9mf+jMNYy8Dhcf595B0TGSzCZq64ir9UukntR6YD3raAO
Wm0=
=qmrY
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- kprobes: Cleanups using guard() and __free(): Use cleanup.h macros to
cleanup code and remove all gotos from kprobes code.
- tracing/probes: Also cleanups tracing/*probe events code with guard()
and __free(). These patches are just to simplify the parser codes.
- kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
This reduces preempt disable time to only when getting the module
refcount in check_kprobe_access_safe().
Previously it disabled preempt needlessly for other checks including
jump_label_text_reserved(), which took a long time because of the
linear search.
* tag 'probes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Simplify __trace_kprobe_create() by removing gotos
tracing: Use __free() for kprobe events to cleanup
tracing: Use __free() in trace_probe for cleanup
kprobes: Remove remaining gotos
kprobes: Remove unneeded goto
kprobes: Use guard for rcu_read_lock
kprobes: Use guard() for external locks
jump_label: Define guard() for jump_label_lock
tracing/eprobe: Adopt guard() and scoped_guard()
tracing/uprobe: Adopt guard() and scoped_guard()
tracing/kprobe: Adopt guard() and scoped_guard()
kprobes: Adopt guard() and scoped_guard()
kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
-----BEGIN PGP SIGNATURE-----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=lTCw
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc-smb3-client-fixes-part' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Fix oops in DebugData when link speed 0
- Two reparse point fixes
- Ten DFS (global namespace) fixes
- Symlink error handling fix
- Two SMB1 fixes
- Four cleanup fixes
- Improved debugging of status codes
- Fix incorrect output of tracepoints for compounding, and add missing
compounding tracepoint
* tag 'v6.14-rc-smb3-client-fixes-part' of git://git.samba.org/sfrench/cifs-2.6: (23 commits)
smb: client: handle lack of EA support in smb2_query_path_info()
smb: client: don't check for @leaf_fullpath in match_server()
smb: client: get rid of TCP_Server_Info::refpath_lock
cifs: Remove duplicate struct reparse_symlink_data and SYMLINK_FLAG_RELATIVE
cifs: Do not attempt to call CIFSGetSrvInodeNumber() without CAP_INFOLEVEL_PASSTHRU
cifs: Do not attempt to call CIFSSMBRenameOpenFile() without CAP_INFOLEVEL_PASSTHRU
cifs: Remove declaration of dead CIFSSMBQuerySymLink function
cifs: Fix printing Status code into dmesg
cifs: Add missing NT_STATUS_* codes from nterr.h to nterr.c
cifs: Fix endian types in struct rfc1002_session_packet
cifs: Use cifs_autodisable_serverino() for disabling CIFS_MOUNT_SERVER_INUM in readdir.c
smb3: add missing tracepoint for querying wsl EAs
smb: client: fix order of arguments of tracepoints
smb: client: fix oops due to unset link speed
smb: client: correctly handle ErrorContextData as a flexible array
smb: client: don't retry DFS targets on server shutdown
smb: client: fix return value of parse_dfs_referrals()
smb: client: optimize referral walk on failed link targets
smb: client: provide dns_resolve_{unc,name} helpers
smb: client: parse DNS domain name from domain= option
...
-----BEGIN PGP SIGNATURE-----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=v8+6
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server updates from Steve French:
"Three ksmbd server fixes:
- Fix potential memory corruption in IPC calls
- Support FSCTL_QUERY_INTERFACE_INFO for more configurations
- Remove some unused functions"
* tag 'v6.14-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix integer overflows on 32 bit systems
ksmbd: browse interfaces list on FSCTL_QUERY_INTERFACE_INFO IOCTL
ksmbd: Remove unused functions
As reported by Namhyung Kim and acknowledged by Qiao Zhao (link:
https://lore.kernel.org/linux-perf-users/20241206001436.1947528-1-namhyung@kernel.org/),
on certain machines, perf trace failed to load the BPF program into the
kernel. The verifier runs perf trace's BPF program for up to 1 million
instructions, returning an E2BIG error, whereas the perf trace BPF
program should be much less complex than that. This patch aims to fix
the issue described above.
The E2BIG problem from clang-15 to clang-16 is cause by this line:
} else if (size < 0 && size >= -6) { /* buffer */
Specifically this check: size < 0. seems like clang generates a cool
optimization to this sign check that breaks things.
Making 'size' s64, and use
} else if ((int)size < 0 && size >= -6) { /* buffer */
Solves the problem. This is some Hogwarts magic.
And the unbounded access of clang-12 and clang-14 (clang-13 works this
time) is fixed by making variable 'aug_size' s64.
As for this:
-if (aug_size > TRACE_AUG_MAX_BUF)
- aug_size = TRACE_AUG_MAX_BUF;
+aug_size = args->args[index] > TRACE_AUG_MAX_BUF ? TRACE_AUG_MAX_BUF : args->args[index];
This makes the BPF skel generated by clang-18 work. Yes, new clangs
introduce problems too.
Sorry, I only know that it works, but I don't know how it works. I'm not
an expert in the BPF verifier. I really hope this is not a kernel
version issue, as that would make the test case (kernel_nr) *
(clang_nr), a true horror story. I will test it on more kernel versions
in the future.
Fixes: 395d38419f: ("perf trace augmented_raw_syscalls: Add more check s to pass the verifier")
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241213023047.541218-1-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
There are some patches with long lines as a result of checkpatch
enforcing 100, not 80, but checkpatch is only a tool not a coding style.
The Linux Kernel Coding Style is still clear here on preferred limit.
Mentioned preferred style of wrapping long lines in DTS, based on Linux
Kernel Coding Style.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250118102247.18257-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmePs7oACgkQnJ2qBz9k
QNmHuAf9GkLnY5u1/81xP5V9ukZ4N2yeMW0dydLS5cjWj/St5ELeMAza3jeqtJtD
j36vbnmy2c5pPaGLAK8BJpMXT/R2TkmmKD004zcfqF2S3SgbGzdgO1zMZzq9KJpM
woRKZtLuglDajedsDEBBcKotBhlN2+C/sQlFuL1mX4zitk9ajr0qYUB1+JqOeg5f
qwPsDLT077ADpxd7lVIMcm+OqbduP5KWkBKYHpn7lJcLe1eqVMMzceJroW42zhVG
Dq8Iln26bbU9Wx6FSPFCUcHEzHRHUfXmu07HN9U0X++0QgWjrmBQQLooGFB/bR4a
edBrPpVas6xE4/brjgFX3gOKtv8xYg==
=ewDV
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_hsm_for_v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify pre-content notification support from Jan Kara:
"This introduces a new fsnotify event (FS_PRE_ACCESS) that gets
generated before a file contents is accessed.
The event is synchronous so if there is listener for this event, the
kernel waits for reply. On success the execution continues as usual,
on failure we propagate the error to userspace. This allows userspace
to fill in file content on demand from slow storage. The context in
which the events are generated has been picked so that we don't hold
any locks and thus there's no risk of a deadlock for the userspace
handler.
The new pre-content event is available only for users with global
CAP_SYS_ADMIN capability (similarly to other parts of fanotify
functionality) and it is an administrator responsibility to make sure
the userspace event handler doesn't do stupid stuff that can DoS the
system.
Based on your feedback from the last submission, fsnotify code has
been improved and now file->f_mode encodes whether pre-content event
needs to be generated for the file so the fast path when nobody wants
pre-content event for the file just grows the additional file->f_mode
check. As a bonus this also removes the checks whether the old
FS_ACCESS event needs to be generated from the fast path. Also the
place where the event is generated during page fault has been moved so
now filemap_fault() generates the event if and only if there is no
uptodate folio in the page cache.
Also we have dropped FS_PRE_MODIFY event as current real-world users
of the pre-content functionality don't really use it so let's start
with the minimal useful feature set"
* tag 'fsnotify_hsm_for_v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (21 commits)
fanotify: Fix crash in fanotify_init(2)
fs: don't block write during exec on pre-content watched files
fs: enable pre-content events on supported file systems
ext4: add pre-content fsnotify hook for DAX faults
btrfs: disable defrag on pre-content watched files
xfs: add pre-content fsnotify hook for DAX faults
fsnotify: generate pre-content permission event on page fault
mm: don't allow huge faults for files with pre content watches
fanotify: disable readahead if we have pre-content watches
fanotify: allow to set errno in FAN_DENY permission response
fanotify: report file range info with pre-content events
fanotify: introduce FAN_PRE_ACCESS permission event
fsnotify: generate pre-content permission event on truncate
fsnotify: pass optional file access range in pre-content event
fsnotify: introduce pre-content permission events
fanotify: reserve event bit of deprecated FAN_DIR_MODIFY
fanotify: rename a misnamed constant
fanotify: don't skip extra event info if no info_mode is set
fsnotify: check if file is actually being watched for pre-content events on open
fsnotify: opt-in for permission events at file open time
...
At btrfs_qgroup_cleanup_dropped_subvolume() all we want to commit the
current transaction in order to have all the qgroup rfer/excl numbers up
to date. However we are using btrfs_start_transaction(), which joins the
current transaction if there is one that is not yet committing, but also
starts a new one if there is none or if the current one is already
committing (its state is >= TRANS_STATE_COMMIT_START). This later case
results in unnecessary IO, wasting time and a pointless rotation of the
backup roots in the super block.
So instead of using btrfs_start_transaction() followed by a
btrfs_commit_transaction(), use btrfs_commit_current_transaction() which
achieves our purpose and avoids starting and committing new transactions.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a bug report that btrfs outputs the following error message:
BTRFS info (device nvme0n1p2): qgroup scan completed (inconsistency flag cleared)
BTRFS warning (device nvme0n1p2): failed to cleanup qgroup 0/1179: -2
[CAUSE]
The error itself is pretty harmless, and the end user should ignore it.
When a subvolume is fully dropped, btrfs will call
btrfs_qgroup_cleanup_dropped_subvolume() to delete the qgroup.
However if a qgroup rescan happened before a subvolume fully dropped,
qgroup for that subvolume will not be re-created, as rescan will only
create new qgroup if there is a BTRFS_ROOT_REF_KEY found.
But before we drop a subvolume, the subvolume is unlinked thus there is no
BTRFS_ROOT_REF_KEY.
In that case, btrfs_remove_qgroup() will fail with -ENOENT and trigger
the above error message.
[FIX]
Just ignore -ENOENT error from btrfs_remove_qgroup() inside
btrfs_qgroup_cleanup_dropped_subvolume().
Reported-by: John Shand <jshand2013@gmail.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1236056
Fixes: 839d6ea4f8 ("btrfs: automatically remove the subvolume qgroup")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>