- Fix a memory leak in the cht-wcove driver by using devm_led_classdev_register().
- Fix an OF node reference leak in the netxbig driver.
- Ensure PWM is disabled properly in pwm-multicolor suspend.
- Add support for Texas Instruments LP8864, LP8864S, LP8866 LED-backlight drivers.
- Add support for STMicroelectronics's LED1202 12-channel LED driver.
- Convert LP8860 bindings to YAML format.
- Add bindings for the TI LP8864/LP8866 LED drivers.
- Add LED1202 LED controller bindings.
- Fix path to color definitions in leds-class-multicolor.yaml.
- Add pm660l compatible to qcom,spmi-flash-led bindings.
- Extend cznic,turris-omnia-leds binding with interrupts property.
- Add documentation for the STMicroelectronics LED1202 driver.
- Add entry for AAEON UP board FPGA drivers in MAINTAINERS.
- Fix a wrong format specifier in the ledtrig-activity driver.
- Fix a bug in the lp8860 driver where only half of the EEPROM was written.
-----BEGIN PGP SIGNATURE-----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=7V05
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
- Allow struct bin_attribute instances to be placed in read-only memory
for enhanced protection
- Fix a memory leak in the cht-wcove driver by using
devm_led_classdev_register()
- Fix an OF node reference leak in the netxbig driver
- Ensure PWM is disabled properly in pwm-multicolor suspend
- Add support for Texas Instruments LP8864, LP8864S, LP8866
LED-backlight drivers
- Add support for STMicroelectronics's LED1202 12-channel LED driver
- Convert LP8860 bindings to YAML format
- Add bindings for the TI LP8864/LP8866 LED drivers
- Add LED1202 LED controller bindings
- Fix path to color definitions in leds-class-multicolor.yaml
- Add pm660l compatible to qcom,spmi-flash-led bindings
- Extend cznic,turris-omnia-leds binding with interrupts property
- Add documentation for the STMicroelectronics LED1202 driver
- Add entry for AAEON UP board FPGA drivers in MAINTAINERS
- Fix a wrong format specifier in the ledtrig-activity driver
- Fix a bug in the lp8860 driver where only half of the EEPROM was
written
* tag 'leds-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
leds: triggers: Constify 'struct bin_attribute'
leds: cht-wcove: Use devm_led_classdev_register() to avoid memory leak
leds: lp8864: Add support for Texas Instruments LP8864, LP8864S, LP8866 LED-backlights
dt-bindings: leds: Convert LP8860 into YAML format
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
leds: pwm-multicolor: Disable PWM when going to suspend
leds: netxbig: Fix an OF node reference leak in netxbig_leds_get_of_pdata()
turris-omnia-mcu-interface.h: Move macro definitions outside of enums
MAINTAINERS: Add entry for AAEON UP board FPGA drivers
leds: Add AAEON UP board LED driver
leds: trigger: netdev: Check offload ability on interface up
leds: turris-omnia: Use uppercase first letter in all comments
leds: turris-omnia: Use dev_err_probe() where appropriate
leds: turris-omnia: Inform about missing LED gamma correction feature in the MCU driver
platform: cznic: turris-omnia-mcu: Inform about missing LED panel brightness change interrupt feature
leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change
leds: turris-omnia: Document driver private structures
dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property
...
Simplify getting a drm_device pointer when using to_i915() in
intel_dp_mst.c from the already available intel_display object, instead
of getting it from a DRM KMS object.
While at it rename dev_priv to i915, following the driver's standard
terminology.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108151916.491113-5-imre.deak@intel.com
Simplify the use of to_intel_display() in intel_dp_mst.c passing it the
already available intel_connector pointer, instead of looking up a
drm_device pointer for the same purpose.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108151916.491113-4-imre.deak@intel.com
Follow the canonical way in intel_dp_mst.c, referencing a connector only
via a struct intel_connector pointer and naming this pointer 'connector'
instead of 'intel_connector', the only exception being the casting of
a drm_connector function parameter pointer to intel_connector, calling
the drm_connector pointer _connector.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108151916.491113-3-imre.deak@intel.com
- Remove unused platform driver support for syscon.
- Allow syscon nodes to be registered without a "syscon" compatible string.
- Make `platform_data` pointer const in struct mfd_cell.
- Revert support for multiple AXP PMICs to avoid regressions.
- Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO operation.
- Store the result from fault_log() for use by other sub-components.
- Fix an invalid regmap-config max_register value.
- Add another Gemini Lake ISA bridge PCI device ID.
- Use devm_register_power_off_handler() to simplify code.
- Add support for QNAP microcontroller units, including LEDs, input, and hwmon.
- Use MFD_CELL macros and remove unused code.
- Add support for AAEON UP board FPGA.
- Remove unused includes.
- Fix various typos and compatibility issues in multiple bindings.
- Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424.
- Convert several bindings to YAML schema.
- Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings directly.
- Fix rohm,bd71815 bindings by correcting resistor values and typos.
- Documentation improvements:
- Add documentation for LED1202 and qnap-mcu-hwmon.
- Adjust the file entry for the qnap-mcu header in MAINTAINERS.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmePbHkACgkQUa+KL4f8
d2HQNw//fM3+JpyTUKjUtBl8YH0ilgZ2iKiXLHyJ6vMIqv+RfLlPAliM8f1bkEj8
x/9kKp6ytdyAhQ/oAJW/vxRhWZVsfh9T7WSy/Q/WNChcGJ0KtUwtjWWuezdDJoyr
6Ju4PhKHVz46cBW56u3OCbcogN8AHi1gZiAh8APwVhldUO6swaisPBvxw/4u4WMs
HGviTLueXEptF4/actnArQ1YJ6tctY7C5tV06f6Irxn6hSz8EpGBRQ47S7Hom+mx
aIyRLkERqhZ1FNBDfk2YERqaOyxzQRYy+PMNr6AtQ/TE+7pVBOz7xoSI3VH3k7mM
k4u8Gau9qbnVi/pUkabgcdKOCGUYeZzXZgJT/Ttq5O9ddPE8sHMcLrxKMtUP2CBE
6Zf0EljscGFOWise/ocNUblpy0rfXPl+wMiibxY5C+X56QkluDn2Q8ObGODt0bbR
ACgPFL2S8m2MLEOTzBKDlSgeqoMZFKVWkqAry+yNUgIKbtM6pIdaM5ZCUhgdJ5GL
CxGP6uw68oAUnr1lRCytgGR5XtmcIXS/Jo2u/T7cmucD3inuxQyt5TrZxma48QbL
2+P2vmymn6ZWQb82OptrnKCMsBEXnNbWv+2BiRYoKXQt48BxIocVrsyEQIh4qGcP
KPUB1aCxP/zJ2H7rTaK4QqM+fgOloShs5nI21v5EWSCQKvTN5ko=
=3HQm
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
- Fix race in device_node_get_regmap() using more extensive locking
- Remove unused platform driver support for syscon
- Allow syscon nodes to be registered without a "syscon" compatible
string
- Make `platform_data` pointer const in struct mfd_cell
- Revert support for multiple AXP PMICs to avoid regressions
- Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO
operation
- Store the result from fault_log() for use by other sub-components
- Fix an invalid regmap-config max_register value
- Add another Gemini Lake ISA bridge PCI device ID
- Use devm_register_power_off_handler() to simplify code
- Add support for QNAP microcontroller units, including LEDs, input,
and hwmon
- Use MFD_CELL macros and remove unused code
- Add support for AAEON UP board FPGA
- Remove unused includes
- Fix various typos and compatibility issues in multiple bindings
- Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424
- Convert several bindings to YAML schema
- Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings
directly
- Fix rohm,bd71815 bindings by correcting resistor values and typos
- Documentation improvements:
- Add documentation for LED1202 and qnap-mcu-hwmon
- Adjust the file entry for the qnap-mcu header in MAINTAINERS
* tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (35 commits)
MAINTAINERS: Adjust the file entry for the qnap-mcu header
dt-bindings: mfd: syscon: Fix ti,j784s4-acspcie-proxy-ctrl compatible
dt-bindings: mfd: syscon: Fix al,alpine-sysfabric-service compatible
Revert "mfd: axp20x: Allow multiple regulators"
dt-bindings: mfd: syscon: Add rk3562 QoS register compatible
mfd: syscon: Allow syscon nodes without a "syscon" compatible
mfd: syscon: Remove the platform driver support
mfd: syscon: Fix race in device_node_get_regmap()
dt-bindings: mfd: atmel: Convert to YAML schema
dt-bindings: mfd: atmel,at91sam9260: Convert to YAML schema
dt-bindings: mfd: sprd,sc2731: Reference sprd,sc2731-efuse bindings
mfd: tps65219: Remove unused macros & add regmap.h
mfd: tps65219: Use MFD_CELL macros
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
mfd: Add support for AAEON UP board FPGA
mfd: da9052: Store result from fault_log
mfd: intel_soc_pmic_chtdc_ti: Fix invalid regmap-config max_register value
mfd: cs42l43: Use devres for remove as well
...
This is a fairly quiet release for the most part, though we do have one
really nice improvement in the spi-mem framework which will improve
performance for flash devices especially when built on by changes in the
MTD subsystem which are also due to be sent this merge window. There's
also been some substantial work on some of the drivers, highlights
include:
- Support for per-operation bus frequency in the spi-mem framework,
meaning speeds are no longer limited by the slowest operation.
- ACPI support and improved power management for Rockchip SFC
controllers.
- Support for Atmel SAM7G5 QuadSPI and KEBA SPI controllers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmeOY7sACgkQJNaLcl1U
h9AA2gf/Zb0B7R5aVlW46OWTYNklvO/yu/3JmVFnd+BdRjr+0/UpnUQ8SAnsFuiK
uX1Mw241SpngI4naqhLdR28SP6dMFyi+/5Orl2/kIzx6RSmCMbNDiw56x71KcXFl
pPjDHRdWOTdRiOwa37/wniaP6wDoWsF4F6sI1jazZP0tc7u+QwT9Hgu+jkzUIQfS
8eSS1W7zOHxqKVohsOb4V8ddVHGbS7EyTbm5RuMOtWP08pTIgzMdQo76WUTkRjLe
8N0PNIbDZSSFLF//DMhTZgeD63cjPN4y7UsM1Z8jrKBtLrEzKSPy/bI/IpnLYyd2
Wdpp2mSCGtRvBO0zU59/HOMv8jYkXw==
=mFrM
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is a fairly quiet release for the most part, though we do have
one really nice improvement in the spi-mem framework which will
improve performance for flash devices especially when built on by
changes in the MTD subsystem which are also due to be sent this merge
window.
There's also been some substantial work on some of the drivers,
highlights include:
- Support for per-operation bus frequency in the spi-mem framework,
meaning speeds are no longer limited by the slowest operation
- ACPI support and improved power management for Rockchip SFC
controllers
- Support for Atmel SAM7G5 QuadSPI and KEBA SPI controllers"
* tag 'spi-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (49 commits)
spi: pxa2xx: Introduce __lpss_ssp_update_priv() helper
spi: ti-qspi: Use syscon_regmap_lookup_by_phandle_args
spi: amd: Fix -Wuninitialized in amd_spi_exec_mem_op()
spi: spi-mem: Estimate the time taken by operations
spi: spi-mem: Create macros for DTR operation
spi: spi-mem: Reorder spi-mem macro assignments
spi: zynqmp-gqspi: Support per spi-mem operation frequency switches
spi: zynq-qspi: Support per spi-mem operation frequency switches
spi: spi-ti-qspi: Support per spi-mem operation frequency switches
spi: spi-sn-f-ospi: Support per spi-mem operation frequency switches
spi: rockchip-sfc: Support per spi-mem operation frequency switches
spi: nxp-fspi: Support per spi-mem operation frequency switches
spi: mxic: Support per spi-mem operation frequency switches
spi: mt65xx: Support per spi-mem operation frequency switches
spi: microchip-core-qspi: Support per spi-mem operation frequency switches
spi: fsl-qspi: Support per spi-mem operation frequency switches
spi: dw: Support per spi-mem operation frequency switches
spi: cadence-qspi: Support per spi-mem operation frequency switches
spi: amlogic-spifc-a1: Support per spi-mem operation frequency switches
spi: amd: Drop redundant check
...
The new revision for 8M Plus has wm8962 codec instead of wm8960.
Therefore add new entry in sof_imx8mp_machs, an array of snd_sof_of_mach,
where we describe topology name and driver name.
For the new revision we have new compatible value and based on this,
we select the new topology file, for wm8962 codec.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://patch.msgid.link/20250122163544.1392869-5-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The new revisions for 8QM and 8QXP have wm8962 codec instead of wm8960.
Therefore add new entries in sof_imx8_machs, an array of snd_sof_of_mach,
where we describe topology name and driver name.
For the new revisions we have new compatible values and based on these,
we select the new topology file, for wm8962 codec.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250122163544.1392869-4-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 2b9cdef136 ("ASoC: SOF: imx: Add devicetree support
to select topologies") we select topology to be used by the board
compatible string in the dts.
Now that we have a way to know when the baseboard is installed, use
the board compatible and select proper topology files when the cs42888
Audio IO card is used.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250122163544.1392869-3-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
wm8960 codec is EOL so we have i.MX8MP EVK Rev B4,
i.MX8QM MEK Rev D and i.MX8QXP MEK WCPU boards with
wm8962 codec.
Therefore, add compatibles for them.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250122163544.1392869-2-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This was a very quiet release, aside from some smaller improvements we
have:
- Support for power budgeting on regulators, initially targeted at some
still in review support for PSE controllers but generally useful.
- Support for error interrupts from ROHM BD96801 devices.
- Support for NXP PCA9452.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmeOYVoACgkQJNaLcl1U
h9D5tAf/RHg2j8OHQlTIjx8nebxIr8RRVmI5ltIlOA6biHsRzIHxOt7HjBaGTl78
qnpOJ8X+JUP5BP0F1n792e5f1HJykyIJA6nQnZfLIeUnLU2KsRPf1hJzDXgIvIoU
1cWuMe0j7oI0+DZYYY5G1AHw1n1J4M3HfXQyuWhfz1hlZTqBAWQSdkRyBp6Yyyth
m6XoAf72ADaKHB0GU6jbdNJJyO8D7rlwk0j6nlm0qoAIi52Se2ZeeJH707Wd/zGI
G3RF4MLkNUzOmzi3hJkhLILG5XwEQiu4pZGgOnYK6AdbxV8fWwq8PNzMqq/lb4Sl
A17Ib8eAPUPfVfUctAvx9DnGnaJKBw==
=Ttps
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This was a very quiet release, aside from some smaller improvements we
have:
- Support for power budgeting on regulators, initially targeted at
some still in review support for PSE controllers but generally
useful
- Support for error interrupts from ROHM BD96801 devices
- Support for NXP PCA9452"
* tag 'regulator-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: Add regulator-power-budget-milliwatt property
regulator: Add support for power budget
regulator: core: Resolve supply using of_node from regulator_config
regulator: of: Implement the unwind path of of_regulator_match()
regulator: tps65219: Remove debugging helper function
regulator: tps65219: Remove MODULE_ALIAS
regulator: tps65219: Update driver name
regulator: tps65219: Use dev_err_probe() instead of dev_err()
regulator: dt-bindings: mt6315: Drop regulator-compatible property
regulator: pca9450: Add PMIC pca9452 support
regulator: dt-bindings: pca9450: Add pca9452 support
regulator: pca9450: Use dev_err_probe() to simplify code
regulator: pca9450: add enable_value for all bucks
regulator: bd96801: Add ERRB IRQ
There's one big bit of work this time around, the addition of support for
a greater range of MBQ access sizes to SoundWire devices together with
support for deferred read/write. The MBQ register maps generally have
variable register sizes, the variable regiseter size support allows them
to be handled much more naturally within regmap with less open coding in
drivers. The deferred read/write support avoids spurious errors when
devices make use of a bus feature allowing them to indicate they're
busy. These changes pull in a supporting SoundWire change, and there's
an ASoC change building off the new code.
The remainder of the changes are code cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmeOXxIACgkQJNaLcl1U
h9Bktwf/ZG6r01FNIw7PTDFQoZ2YipaFffqyJZco7zj2kyK1SqPt9jRQuPD5K8CE
gXwxhIDu/Z7XXhTBOQ42shtOAyhw6FQDXdfULYvVl0kZ6JIUtz/J7JCuh3v/UBMo
PWvFCIutDsgte0ru7jdQCTxgGgc39sobEQQOyznlNP+If7+aRpWW6B95YqakTzCc
zDy8aDE4YxpFy6Wgg+t4xuO1KGdltHBoNFgtUNuaQtfkQP38JlMo9Ma/BEVu8INK
WlGYPjo3eo/oRCohN+MByq15qvbVheAFg0B9h3mNcTOGFGhvNLBkqc4DE85UBk6g
JH/QY1LEqTqHKEpi3oRAgwUUgy3Tog==
=6vTg
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"There's one big bit of work this time around, the addition of support
for a greater range of MBQ access sizes to SoundWire devices together
with support for deferred read/write.
The MBQ register maps generally have variable register sizes, the
variable regiseter size support allows them to be handled much more
naturally within regmap with less open coding in drivers.
The deferred read/write support avoids spurious errors when devices
make use of a bus feature allowing them to indicate they're busy.
These changes pull in a supporting SoundWire change, and there's an
ASoC change building off the new code.
The remainder of the changes are code cleanups"
* tag 'regmap-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: sdw-mbq: Add support for SDCA deferred controls
regmap: sdw-mbq: Add support for further MBQ register sizes
ASoC: SDCA: Update list of entity_0 controls
soundwire: SDCA: Add additional SDCA address macros
regmap: regmap_multi_reg_read(): make register list const
regmap: cache: rbtree: use krealloc_array() to replace krealloc()
regmap: cache: mapple: use kmalloc_array() to replace kmalloc()
regmap: place foo / 8 and foo % 8 closer to each other
regmap: Use BITS_TO_BYTES()
regmap: cache: Use BITS_TO_BYTES()
- support a new model in the qcom-wcn pwrseq driver
- explain the need to keep the WLAN_EN GPIO workaround for now with
a FIXME comment
-----BEGIN PGP SIGNATURE-----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=VK8V
-----END PGP SIGNATURE-----
Merge tag 'pwrseq-updates-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"We added support for another Qualcomm WCN model and a FIXME comment
that explains why we still need to keep a GPIO workaround for now
despite having merged a set of changes to the PCI code that seemingly
fixed the underlying problem:
- support a new model in the qcom-wcn pwrseq driver
- explain the need to keep the WLAN_EN GPIO workaround for now with a
FIXME comment"
* tag 'pwrseq-updates-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: explain why we need the WLAN_EN GPIO hack
power: sequencing: qcom-wcn: add support for the WCN6750 PMU
Driver improvements:
- support a new model in gpio-mpc8xxx
- refactor gpio-tqmx86 and add support for direction setting
- allow building gpio-omap with COMPILE_TEST=y
- use gpiochip_get_data() instead of dev_get_drvdata() in gpio-twl6040
- drop unued field from driver data in gpio-altera
- use generic request/free callbacks in gpio-regmap for better integration
with pinctrl
- use dev_err_probe() where applicable in gpio-pca953x
- use existing dedicated GPIO defines in gpio-tps65219 instead of custom
ones
DT bindings:
- document a new model in fsl,qoriq-gpio
- explain the chip's latch clock pin and how it works like chip-select
in fairchild,74hc595
- enable the gpio-line-names property for gpio-brcmstb
-----BEGIN PGP SIGNATURE-----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=iXkF
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Thanks to little activity in December, this is really tiny. Just a few
updates to drivers and device-tree bindings.
Driver improvements:
- support a new model in gpio-mpc8xxx
- refactor gpio-tqmx86 and add support for direction setting
- allow building gpio-omap with COMPILE_TEST=y
- use gpiochip_get_data() instead of dev_get_drvdata() in
gpio-twl6040
- drop unued field from driver data in gpio-altera
- use generic request/free callbacks in gpio-regmap for better
integration with pinctrl
- use dev_err_probe() where applicable in gpio-pca953x
- use existing dedicated GPIO defines in gpio-tps65219 instead of
custom ones
DT bindings:
- document a new model in fsl,qoriq-gpio
- explain the chip's latch clock pin and how it works like
chip-select in fairchild,74hc595
- enable the gpio-line-names property for gpio-brcmstb"
* tag 'gpio-updates-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: regmap: Use generic request/free ops
gpio: altera: Drop .mapped_irq from driver data
gpio: mpc8xxx: Add MPC8314 support
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,mpc8314-gpio
dt-bindings: gpio: fairchild,74hc595: Document chip select vs. latch clock
gpio: tps65219: Use existing kernel gpio macros
gpio: pca953x: log an error when failing to get the reset GPIO
dt-bindings: gpio: brcmstb: permit gpio-line-names property
gpio: tqmx86: add support for changing GPIO directions
gpio: tqmx86: introduce tqmx86_gpio_clrsetbits() helper
gpio: tqmx86: use cleanup guards for spinlock
gpio: tqmx86: consistently refer to IRQs by hwirq numbers
gpio: tqmx86: add macros for interrupt configuration
gpio: omap: allow building the module with COMPILE_TEST=y
gpio: twl4030: use gpiochip_get_data
Core
----
- More core refactoring to reduce the RTNL lock contention,
including preparatory work for the per-network namespace RTNL lock,
replacing RTNL lock with a per device-one to protect NAPI-related
net device data and moving synchronize_net() calls outside such
lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge and
more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter
---------
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on
each restart.
Protocols
---------
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets,
to avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel
TLS (for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API
----------
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling
-----------------
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec,
to ease maintenance and future development.
- Add YNL support for decoding the link types used in net
self-tests, allowing a single build to run both net and
drivers/net.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues, affecting
both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station mode
support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hrsp
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
cxl_find_regblock_instance() counts the number of instances of a register
block as a side effect of searching through all available register blocks.
cxl_count_regblock() throws away that work and recounts all the register
blocks by asking cxl_find_regblock_instance() to redo work it has
already done until it finally returns an error, that is needlessly
wasteful.
Let cxl_count_regblock() leverage the counting that
cxl_find_regblock_instance() already does by passing in a sentinel value
(CXL_INSTANCES_COUNT) that triggers the count to be returned.
[ davej: Updated to more concise commit log supplied by djbw ]
[ davej: Fix up checkpatch formatting warnings ]
Signed-off-by: Huaisheng Ye <huaisheng.ye@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250115152600.26482-2-huaisheng.ye@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
While currently there are no in-tree callers of these functions, it is
best to keep them up-to-date with the latest network API.
In addition, add the missing EXPORT_SYMBOL_GPL to the functions listed
in pvcalls-front.h.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <alpine.DEB.2.22.394.2501201537560.11086@ubuntu-linux-20-04-desktop>
Signed-off-by: Juergen Gross <jgross@suse.com>
Randconfig builds without dmabuf result in this link error from
the fasl-asrc driver:
ERROR: modpost: "dma_buf_put" [sound/core/snd-compress.ko] undefined!
ERROR: modpost: "dma_buf_export" [sound/soc/fsl/snd-soc-fsl-asrc.ko] undefined!
Add the missing 'select' statement.
Fixes: 24a01710f6 ("ASoC: fsl_asrc_m2m: Add memory to memory function")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250122065330.1423248-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When link DT nodes are parsed, most functions get port as a parameter,
which results in port endpoint@0 always being used. However, each endpoint
might have different settings, but those are currently ignored.
Fix that by passing endpoint instead of port when parsing link parameters.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20250121064815.741820-1-ivo.g.dimitrov.75@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Added the remaining SAIs in addition to SAI1 and SAI3. There is no SAI4.
Signed-off-by: Alexander Boehm <aboehm@eurofunk.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://patch.msgid.link/20250122082928.1321536-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
LiteX updates for next
Remaining LiteX updates from 2024, reviewed and
successfully tested against v6.13-rc1.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
* tag 'litex-6.13-rc1' of https://github.com/litex-hub/linux:
drivers/soc/litex: Use devm_register_restart_handler()
Link: https://lore.kernel.org/r/Z41PgCffqPUTyxkE@errol.ini.cmu.edu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Gen7 only supports ASTDP. Gens 4 to 6 support various TX chips,
except ASTDP. These boards detect the TX chips by reading the SoC
scratch register as VGACRD1.
Gens 1 to 3 only support SIL164. These boards read the DVO bit from
VGACRA3. Hence move this test behind a branch, so that it does not
run on later generations.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-6-tzimmermann@suse.de
Remove the call to ast_dp_launch() from ast_detect_tx_chip() and
perform it unconditionally in ast_post_gpu().
Also add error handling: the detection code apparently used
ast_dp_launch() to test for a working ASTDP, falling back to VGA on
errors. As the VBIOS reports ASTDP, silently ignoring errors is
questionable behavior. With the refactoring, failing to initialize
the ASTDP will also fail probing the driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-5-tzimmermann@suse.de
Reorganize ast_post_gpu() so that it first branches by Gen and then
by config mode and TX chip. This will later make it possible to split
up the function by Gen.
The helper ast_init_3rdtx() only handles Gen4 and Gen5, so leave it
out from the other Gens.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-4-tzimmermann@suse.de
Move DRAM detection before TX-chip detection. Both steps are independent
from each other. Detection of the TX-chip is now next to posting those
chips, which can be done in a single step.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-3-tzimmermann@suse.de
Wide-screen support is relevant for mode validation. Do not detect it
before setting up the mode-setting pipeline. Gets the function call out
of the way of other initialization code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-2-tzimmermann@suse.de
Hibernation allows other OSs to boot and thus the variable state might
be altered by the time the hibernation image is resumed. Resync the
variable state by looping over all the dentries and update the size
(in case of alteration) delete any which no-longer exist. Finally,
loop over all efi variables creating any which don't have
corresponding dentries.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[ardb: - apply error pointer fixup from Dan Carpenter
- rebase onto latest version of James's efivarfs rework]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reuse later for variable creation after hibernation
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
GCC 15 changed the default C standard version to C23, which should not
have impacted the kernel because it requests the gnu11 standard via
'-std=' in the main Makefile. However, the EFI libstub Makefile uses its
own set of KBUILD_CFLAGS for x86 without a '-std=' value (i.e., using
the default), resulting in errors from the kernel's definitions of bool,
true, and false in stddef.h, which are reserved keywords under C23.
./include/linux/stddef.h:11:9: error: expected identifier before ‘false’
11 | false = 0,
./include/linux/types.h:35:33: error: two or more data types in declaration specifiers
35 | typedef _Bool bool;
Set '-std=gnu11' in the x86 cflags to resolve the error and consistently
use the same C standard version for the entire kernel. All other
architectures reuse KBUILD_CFLAGS from the rest of the kernel, so this
issue is not visible for them.
Cc: stable@vger.kernel.org
Reported-by: Kostadin Shishmanov <kostadinshishmanov@protonmail.com>
Closes: https://lore.kernel.org/4OAhbllK7x4QJGpZjkYjtBYNLd_2whHx9oFiuZcGwtVR4hIzvduultkgfAIRZI3vQpZylu7Gl929HaYFRGeMEalWCpeMzCIIhLxxRhq4U-Y=@protonmail.com/
Reported-by: Jakub Jelinek <jakub@redhat.com>
Closes: https://lore.kernel.org/Z4467umXR2PZ0M1H@tucnak/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In the combination of DRM_KMS_HELPER=m, DRM_GEM_SHMEM_HELPER=y, DRM_FBDEV_EMULATION=y,
The shmem code fails to link against the KMS helpers:
x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_driver_fbdev_probe':
(.text+0xeec601): undefined reference to `drm_fb_helper_alloc_info'
x86_64-linux-ld: (.text+0xeec633): undefined reference to `drm_fb_helper_fill_info'
x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_get_page':
drm_fbdev_shmem.c:(.text+0xeec7d2): undefined reference to `drm_gem_fb_get_obj'
x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_fb_mmap':
drm_fbdev_shmem.c:(.text+0xeec9f6): undefined reference to `drm_gem_fb_get_obj'
x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_defio_imageblit':
(.rodata+0x5b2288): undefined reference to `drm_fb_helper_check_var'
x86_64-linux-ld: (.rodata+0x5b2290): undefined reference to `drm_fb_helper_set_par'
This can happen for a number of device drivers that select DRM_GEM_SHMEM_HELPER
without also selecting DRM_KMS_HELPER. To work around this, add another select
that forces DRM_KMS_HELPER to be built-in rather than a loadable module, but
only if FBDEV emulation is also enabled. DRM_TTM_HELPER and DRM_GEM_DMA_HELPER
look like they have the same problem in theory even if there is no possible
configuration that shows it. For consistency, do the same change to those.
Closes: https://lore.kernel.org/all/20250121-greedy-flounder-of-abundance-4d2ee8-mkl@pengutronix.de
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122090211.3161186-1-arnd@kernel.org
The error handling in tas2781_hda_spi_probe() has quite a few
problems, as reported by Dan Carpenter. The code jumps to err label
and calls tas2781_hda_remove(), but this call would rather crash.
In some places, no error code is set properly, and the runtime PM
setup is doubly done.
This patch tries to address those bogus error handling. Basically we
can return immediately at each error before adding the component.
Also, the error code should be set properly for the unmatched SPI
device name. And finally, component_add() should be added before
enabling the runtime PM.
Fixes: bb5f86ea50 ("ALSA: hda/tas2781: Add tas2781 hda SPI driver")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/ae5fcd48-58ac-49a8-a434-5f779bad0fb7@stanley.mountain
Link: https://patch.msgid.link/20250122084756.23876-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The scnprintf() function never returns negatives. And it won't return
zero here either, plus if it did we'd need to fix the error code.
Delete this dead code.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/d57ded9e-9969-4922-8347-67b758499483@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While setting the bounds for compressed bpp, we ensure that the
compressed bpp is less than the pipe bpp.
This causes an issue with the 420 output format, where the effective
link bpp (or output bpp) is half that of the pipe bpp. Therefore instead
of using pipe bpp, use the output bpp to set the bounds for the
compressed bpp.
v2: Use identifier output_bpp instead of link_bpp (Imre)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117050713.152012-1-ankit.k.nautiyal@intel.com
When the 'cachestat()' system call was added in commit cf264e1329
("cachestat: implement cachestat syscall"), it was meant to be a much
more convenient (and performant) version of mincore() that didn't need
mapping things into the user virtual address space in order to work.
But it ended up missing the "check for writability or ownership" fix for
mincore(), done in commit 134fca9063 ("mm/mincore.c: make mincore()
more conservative").
This just adds equivalent logic to 'cachestat()', modified for the file
context (rather than vma).
Reported-by: Sudheendra Raghav Neela <sneela@tugraz.at>
Fixes: cf264e1329 ("cachestat: implement cachestat syscall")
Tested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=9M+E
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit update from Paul Moore:
"A single audit patch that fixes a problem when collecting pathnames
for audit PATH records that was caused by some faulty pathname
matching logic"
* tag 'audit-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix suffixed '/' filename matching
-----BEGIN PGP SIGNATURE-----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=UJsr
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Extended permissions supported in conditional policy
The SELinux extended permissions, aka "xperms", allow security admins
to target individuals ioctls, and recently netlink messages, with
their SELinux policy. Adding support for conditional policies allows
admins to toggle the granular xperms using SELinux booleans, helping
pave the way for greater use of xperms in general purpose SELinux
policies. This change bumps the maximum SELinux policy version to 34.
- Fix a SCTP/SELinux error return code inconsistency
Depending on the loaded SELinux policy, specifically it's
EXTSOCKCLASS support, the bind(2) LSM/SELinux hook could return
different error codes due to the SELinux code checking the socket's
SELinux object class (which can vary depending on EXTSOCKCLASS) and
not the socket's sk_protocol field. We fix this by doing the obvious,
and looking at the sock->sk_protocol field instead of the object
class.
- Makefile fixes to properly cleanup av_permissions.h
Add av_permissions.h to "targets" so that it is properly cleaned up
using the kbuild infrastructure.
- A number of smaller improvements by Christian Göttsche
A variety of straightforward changes to reduce code duplication,
reduce pointer lookups, migrate void pointers to defined types,
simplify code, constify function parameters, and correct iterator
types.
* tag 'selinux-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: make more use of str_read() when loading the policy
selinux: avoid unnecessary indirection in struct level_datum
selinux: use known type instead of void pointer
selinux: rename comparison functions for clarity
selinux: rework match_ipv6_addrmask()
selinux: constify and reconcile function parameter names
selinux: avoid using types indicating user space interaction
selinux: supply missing field initializers
selinux: add netlink nlmsg_type audit message
selinux: add support for xperms in conditional policies
selinux: Fix SCTP error inconsistency in selinux_socket_bind()
selinux: use native iterator types
selinux: add generated av_permissions.h to targets
-----BEGIN PGP SIGNATURE-----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=fgyr
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Improved handling of LSM "secctx" strings through lsm_context struct
The LSM secctx string interface is from an older time when only one
LSM was supported, migrate over to the lsm_context struct to better
support the different LSMs we now have and make it easier to support
new LSMs in the future.
These changes explain the Rust, VFS, and networking changes in the
diffstat.
- Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are
enabled
Small tweak to be a bit smarter about when we build the LSM's common
audit helpers.
- Check for absurdly large policies from userspace in SafeSetID
SafeSetID policies rules are fairly small, basically just "UID:UID",
it easy to impose a limit of KMALLOC_MAX_SIZE on policy writes which
helps quiet a number of syzbot related issues. While work is being
done to address the syzbot issues through other mechanisms, this is a
trivial and relatively safe fix that we can do now.
- Various minor improvements and cleanups
A collection of improvements to the kernel selftests, constification
of some function parameters, removing redundant assignments, and
local variable renames to improve readability.
* tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lockdown: initialize local array before use to quiet static analysis
safesetid: check size of policy writes
net: corrections for security_secid_to_secctx returns
lsm: rename variable to avoid shadowing
lsm: constify function parameters
security: remove redundant assignment to return variable
lsm: Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are set
selftests: refactor the lsm `flags_overset_lsm_set_self_attr` test
binder: initialize lsm_context structure
rust: replace lsm context+len with lsm_context
lsm: secctx provider check on release
lsm: lsm_context in security_dentry_init_security
lsm: use lsm_context in security_inode_getsecctx
lsm: replace context+len with lsm_context
lsm: ensure the correct LSM context releaser
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCZ4rmvxQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5avvAP4tzjNdVp3tFeq9bA8gQZEJ74E6q/6a
Qb18xTn54hxGXAEAuotzwJiandLBk/3hkHIE0BbyzmULiVMpos4qVuUmTwI=
=ZvaD
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"There's just a couple of changes: two kernel messages addressed, a
measurement policy collision addressed, and one policy cleanup.
Please note that the contents of the IMA measurement list is
potentially affected. The builtin tmpfs IMA policy rule change might
introduce additional measurements, while detecting a reboot might
eliminate some measurements"
* tag 'integrity-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: ignore suffixed policy rule comments
ima: limit the builtin 'tcb' dont_measure tmpfs policy rule
ima: kexec: silence RCU list traversal warning
ima: Suspend PCR extends and log appends when rebooting