Although the previous patch can avoid ps and ps UAF for _do_serial, it
can not avoid potential UAF issue for reorder_work. This issue can
happen just as below:
crypto_request crypto_request crypto_del_alg
padata_do_serial
...
padata_reorder
// processes all remaining
// requests then breaks
while (1) {
if (!padata)
break;
...
}
padata_do_serial
// new request added
list_add
// sees the new request
queue_work(reorder_work)
padata_reorder
queue_work_on(squeue->work)
...
<kworker context>
padata_serial_worker
// completes new request,
// no more outstanding
// requests
crypto_del_alg
// free pd
<kworker context>
invoke_padata_reorder
// UAF of pd
To avoid UAF for 'reorder_work', get 'pd' ref before put 'reorder_work'
into the 'serial_wq' and put 'pd' ref until the 'serial_wq' finish.
Fixes: bbefa1dd6a ("crypto: pcrypt - Avoid deadlock by using per-instance padata queues")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A bug was found when run ltp test:
BUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0
Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206
CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+
Workqueue: pdecrypt_parallel padata_parallel_worker
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
print_address_description.constprop.0+0x6b/0x3d0
print_report+0xdd/0x2c0
kasan_report+0xa5/0xd0
padata_find_next+0x29/0x1a0
padata_reorder+0x131/0x220
padata_parallel_worker+0x3d/0xc0
process_one_work+0x2ec/0x5a0
If 'mdelay(10)' is added before calling 'padata_find_next' in the
'padata_reorder' function, this issue could be reproduced easily with
ltp test (pcrypt_aead01).
This can be explained as bellow:
pcrypt_aead_encrypt
...
padata_do_parallel
refcount_inc(&pd->refcnt); // add refcnt
...
padata_do_serial
padata_reorder // pd
while (1) {
padata_find_next(pd, true); // using pd
queue_work_on
...
padata_serial_worker crypto_del_alg
padata_put_pd_cnt // sub refcnt
padata_free_shell
padata_put_pd(ps->pd);
// pd is freed
// loop again, but pd is freed
// call padata_find_next, UAF
}
In the padata_reorder function, when it loops in 'while', if the alg is
deleted, the refcnt may be decreased to 0 before entering
'padata_find_next', which leads to UAF.
As mentioned in [1], do_serial is supposed to be called with BHs disabled
and always happen under RCU protection, to address this issue, add
synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls
to finish.
[1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/
[2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/
Fixes: b128a30409 ("padata: allocate workqueue internally")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Qu Zicheng <quzicheng@huawei.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add helpers for pd to get/put refcnt to make code consice.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- bump version strings, by Simon Wunderlich
- Reorder includes for distributed-arp-table.c, by Sven Eckelmann
- Fix translation table change handling, by Remi Pommarel (2 patches)
- Map VID 0 to untagged TT VLAN, by Sven Eckelmann
- Update MAINTAINERS/mailmap e-mail addresses, by the respective authors
(4 patches)
- netlink: reduce duplicate code by returning interfaces,
by Linus Lüssing
-----BEGIN PGP SIGNATURE-----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=cv/9
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20250117' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Reorder includes for distributed-arp-table.c, by Sven Eckelmann
- Fix translation table change handling, by Remi Pommarel (2 patches)
- Map VID 0 to untagged TT VLAN, by Sven Eckelmann
- Update MAINTAINERS/mailmap e-mail addresses, by the respective authors
(4 patches)
- netlink: reduce duplicate code by returning interfaces,
by Linus Lüssing
* tag 'batadv-next-pullrequest-20250117' of git://git.open-mesh.org/linux-merge:
batman-adv: netlink: reduce duplicate code by returning interfaces
MAINTAINERS: mailmap: add entries for Antonio Quartulli
mailmap: add entries for Sven Eckelmann
mailmap: add entries for Simon Wunderlich
MAINTAINERS: update email address of Marek Linder
batman-adv: Map VID 0 to untagged TT VLAN
batman-adv: Don't keep redundant TT change events
batman-adv: Remove atomic usage for tt.local_changes
batman-adv: Reorder includes for distributed-arp-table.c
batman-adv: Start new development cycle
====================
Link: https://patch.msgid.link/20250117123910.219278-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmeKvq8RHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtJ3wf/bMRrED1k1xtC117yxBthXOZj7Ae0MG3s
cqIDBZ2MSmi596jfmc/FRFTN6Rie7+WQg8MGhpWpJt4WyvCd+IqmluLwuJGg3oHz
KdDQHN766cPb50mykTBY0m+Uh9eqyhaoozzK+KbrJZNLUt/Ri3DOdPInWP/ODKuT
uo9xv25zmOMQuUJlhOlFpOW68y6isuMsnPpgTvbtjndw3nPe+tVIfGPdg3xeQnq1
SG05wmOeJ8obmO1VsnmHPN20F5PfS5t2asu12UafR7KTiJOdP2QXKGNTy+ag7fQ/
9Sq6SzuPpbHHJJ93f0aJOkTUKdQVmk2xfCYNOyPNu1ewLqiVlvnkew==
=Vu+D
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.14
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
* tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits)
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
wifi: wilc1000: unregister wiphy only after netdev registration
wifi: cfg80211: adjust allocation of colocated AP data
wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf()
wifi: ath12k: fix key cache handling
wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function
wifi: ath12k: Remove ath12k_get_num_hw() helper function
wifi: ath12k: Refactor the ath12k_hw get helper function argument
wifi: ath12k: Refactor ath12k_hw set helper function argument
wifi: mt76: mt7996: add implicit beamforming support for mt7992
wifi: mt76: mt7996: fix beacon command during disabling
wifi: mt76: mt7996: fix ldpc setting
wifi: mt76: mt7996: fix definition of tx descriptor
wifi: mt76: connac: adjust phy capabilities based on band constraints
wifi: mt76: mt7996: fix incorrect indexing of MIB FW event
wifi: mt76: mt7996: fix HE Phy capability
wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU
wifi: mt76: mt7996: add max mpdu len capability
wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain
...
====================
Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After 1b23cdbd2b ("net: protect netdev->napi_list with netdev_lock()")
it makes sense to iterate through dev->napi_list while holding
the device lock.
Also call synchronize_net() at most one time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250117232113.1612899-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have some leftovers from the switch to linkmode bitmaps which
- have never been used
- are not used any longer
- have no user outside phy_device.c
So remove them.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/5493b96e-88bb-4230-a911-322659ec5167@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lion Ackermann was able to create a UAF which can be abused for privilege
escalation with the following script
Step 1. create root qdisc
tc qdisc add dev lo root handle 1:0 drr
step2. a class for packet aggregation do demonstrate uaf
tc class add dev lo classid 1:1 drr
step3. a class for nesting
tc class add dev lo classid 1:2 drr
step4. a class to graft qdisc to
tc class add dev lo classid 1:3 drr
step5.
tc qdisc add dev lo parent 1:1 handle 2:0 plug limit 1024
step6.
tc qdisc add dev lo parent 1:2 handle 3:0 drr
step7.
tc class add dev lo classid 3:1 drr
step 8.
tc qdisc add dev lo parent 3:1 handle 4:0 pfifo
step 9. Display the class/qdisc layout
tc class ls dev lo
class drr 1:1 root leaf 2: quantum 64Kb
class drr 1:2 root leaf 3: quantum 64Kb
class drr 3:1 root leaf 4: quantum 64Kb
tc qdisc ls
qdisc drr 1: dev lo root refcnt 2
qdisc plug 2: dev lo parent 1:1
qdisc pfifo 4: dev lo parent 3:1 limit 1000p
qdisc drr 3: dev lo parent 1:2
step10. trigger the bug <=== prevented by this patch
tc qdisc replace dev lo parent 1:3 handle 4:0
step 11. Redisplay again the qdiscs/classes
tc class ls dev lo
class drr 1:1 root leaf 2: quantum 64Kb
class drr 1:2 root leaf 3: quantum 64Kb
class drr 1:3 root leaf 4: quantum 64Kb
class drr 3:1 root leaf 4: quantum 64Kb
tc qdisc ls
qdisc drr 1: dev lo root refcnt 2
qdisc plug 2: dev lo parent 1:1
qdisc pfifo 4: dev lo parent 3:1 refcnt 2 limit 1000p
qdisc drr 3: dev lo parent 1:2
Observe that a) parent for 4:0 does not change despite the replace request.
There can only be one parent. b) refcount has gone up by two for 4:0 and
c) both class 1:3 and 3:1 are pointing to it.
Step 12. send one packet to plug
echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10001))
step13. send one packet to the grafted fifo
echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10003))
step14. lets trigger the uaf
tc class delete dev lo classid 1:3
tc class delete dev lo classid 1:1
The semantics of "replace" is for a del/add _on the same node_ and not
a delete from one node(3:1) and add to another node (1:3) as in step10.
While we could "fix" with a more complex approach there could be
consequences to expectations so the patch takes the preventive approach of
"disallow such config".
Joint work with Lion Ackermann <nnamrec@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250116013713.900000-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following trace can be seen if a device is being unregistered while
its number of channels are being modified.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 3754 at kernel/locking/mutex.c:564 __mutex_lock+0xc8a/0x1120
CPU: 3 UID: 0 PID: 3754 Comm: ethtool Not tainted 6.13.0-rc6+ #771
RIP: 0010:__mutex_lock+0xc8a/0x1120
Call Trace:
<TASK>
ethtool_check_max_channel+0x1ea/0x880
ethnl_set_channels+0x3c3/0xb10
ethnl_default_set_doit+0x306/0x650
genl_family_rcv_msg_doit+0x1e3/0x2c0
genl_rcv_msg+0x432/0x6f0
netlink_rcv_skb+0x13d/0x3b0
genl_rcv+0x28/0x40
netlink_unicast+0x42e/0x720
netlink_sendmsg+0x765/0xc20
__sys_sendto+0x3ac/0x420
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
This is because unregister_netdevice_many_notify might run before the
rtnl lock section of ethnl operations, eg. set_channels in the above
example. In this example the rss lock would be destroyed by the device
unregistration path before being used again, but in general running
ethnl operations while dismantle has started is not a good idea.
Fix this by denying any operation on devices being unregistered. A check
was already there in ethnl_ops_begin, but not wide enough.
Note that the same issue cannot be seen on the ioctl version
(__dev_ethtool) because the device reference is retrieved from within
the rtnl lock section there. Once dismantle started, the net device is
unlisted and no reference will be found.
Fixes: dde91ccfa2 ("ethtool: do not perform operations on net devices being unregistered")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250116092159.50890-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds with gcc 14.2.1 report:
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:4193:32: error: ‘%s’ directive output may be truncated writing up to 31 bytes into a region of size 27 [-Werror=format-truncation=]
4193 | "/pkg %s", buf);
It's upset that we let buf be full length but then we use 5
characters for "/pkg ".
The builds is also clear with clang version 19.1.5 now.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250117183726.1481524-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of SYN + MPC retransmissions before falling back to TCP was
fixed to 2. This is certainly a good default value, but having a fixed
number can be a problem in some environments.
The current behaviour means that if all packets are dropped, there will
be:
- The initial SYN + MPC
- 2 retransmissions with MPC
- The next ones will be without MPTCP.
So typically ~3 seconds before falling back to TCP. In some networks
where some temporally blackholes are unfortunately frequent, or when a
client tries to initiate connections while the network is not ready yet,
this can cause new connections not to have MPTCP connections.
In such environments, it is now possible to increase the number of SYN
retransmissions with MPTCP options to make sure MPTCP is used.
Interesting values are:
- 0: the first retransmission will be done without MPTCP options: quite
aggressive, but also a higher risk of detecting false-positive
MPTCP blackholes.
- >= 128: all SYN retransmissions will keep the MPTCP options: back to
the < 6.12 behaviour.
The default behaviour is not changed here.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250117-net-next-mptcp-syn_retrans_before_tcp_fallback-v1-1-ab4b187099b0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shinas Rasheed says:
====================
Fix race conditions in ndo_get_stats64
Fix race conditions in ndo_get_stats64 by storing tx/rx stats
locally and not availing per queue resources which could be torn
down during interface stop. Also remove stats fetch from
firmware which is currently unnecessary
====================
Link: https://patch.msgid.link/20250117094653.2588578-1-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update tx/rx stats locally, so that ndo_get_stats64()
can use that and not rely on per queue resources to obtain statistics.
The latter used to cause race conditions when the device stopped.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://patch.msgid.link/20250117094653.2588578-5-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update tx/rx stats locally, so that ndo_get_stats64()
can use that and not rely on per queue resources to obtain statistics.
The latter used to cause race conditions when the device stopped.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://patch.msgid.link/20250117094653.2588578-3-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of silently ignoring invalid/unsupported settings, report an
error. Additionally, relax the check for non-zero usecs to apply only
when it will be used (i.e. when frames != 1).
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20250116232954.2696930-3-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of using literals, add some symbolic constants for the IRQ delay
timer calculation.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20250116232954.2696930-2-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update header inclusions to follow IWYU (Include What You Use)
principle.
In this case replace of_gpio.h, which is subject to remove by the GPIOLIB
subsystem, with the respective headers that are being used by the driver.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250116153119.148097-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
of_gpio.h is deprecated and subject to remove. The drivers in question
don't use it, simply remove the unused header.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The xe_sriov_probe_early() function prints the sriov pf/vf mode on
driver probe. When running in non-sriov mode, the below debug message
is seen.
"Running in none mode".
This print does not convey any information. This commit suppresses this
debug message and shows only when running in PF/VF mode.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michał Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116055617.20611-1-satyanarayana.k.v.p@intel.com
The purpose of the GuC Buffer Cache is to maintain a set ofreusable
buffers that could be used while sending some of the CTB H2G actions
that require separate buffer with indirect data. Currently only few
PF actions need this so initialize it only when running as a PF.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-9-michal.wajdeczko@intel.com
Drop unused struct xe_bo forward declaration and, while around,
fix unnecessary line split in xe_sa_bo_free() declaration.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-8-michal.wajdeczko@intel.com
Actual xe_sa_manager implementation uses hardcoded 4K to exclude
it from making suballocations but in upcoming patch we want to
reuse the xe_sa_manager where such 4K guard is not needed. Add
another variant of the xe_sa_bo_manager_init() function that
accepts arbitrary guard size.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-7-michal.wajdeczko@intel.com
Actual xe_sa_manager implementation uses hardcoded GFP_KERNEL flag
during creation of suballocations but in upcoming patch we want to
reuse the xe_sa_manager in places where GFP_KERNEL is not allowed.
Add another variant of the xe_sa_bo_new() function that accepts
arbitrary gfp flags.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-6-michal.wajdeczko@intel.com
There is no need to use tile_to_xe() since we already got the xe.
And we should keep all variable declarations together, no need for
separate sa_manager declaration.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-5-michal.wajdeczko@intel.com
Instead of raw errno value we can print friendly error code and
also print size of the buffer object that we fail to prepare.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-4-michal.wajdeczko@intel.com
The sa_manager is drmm_kzalloc'ed so all members are already zero.
And in case of kvzalloc() failure we are not returning pointer to
the sa_manager at all, so no point in resetting .bo member.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-3-michal.wajdeczko@intel.com
After successful call to drm_suballoc_manager_init() we should
make sure to call drm_suballoc_manager_fini() as it may include
some cleanup code even if we didn't start using it for real.
As we can abort init() early due to kvzalloc() failure, we should
either explicitly call drm_suballoc_manager_fini() or, even better,
postpone drm_suballoc_manager_init() once we finish all other
preparation steps, so we can rely on fini() that will do cleanup.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-2-michal.wajdeczko@intel.com
The functions th1520_mbox_suspend_noirq and th1520_mbox_resume_noirq are
intended to save and restore the interrupt mask registers in the MBOX
ICU0. However, the array used to store these registers was incorrectly
sized, leading to memory corruption when accessing all four registers.
This commit corrects the array size to accommodate all four interrupt
mask registers, preventing memory corruption during suspend and resume
operations.
Fixes: 5d4d263e1c ("mailbox: Introduce support for T-head TH1520 Mailbox driver")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/a99e72be-8490-4960-ad26-cbfef6af238f@stanley.mountain/
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
struct zynqmp_ipi_pdata __percpu *pdata is not a per-cpu variable,
so it should not be annotated with __percpu annotation.
Remove invalid __percpu annotation to fix several
zynqmp-ipi-mailbox.c:920:15: warning: incorrect type in assignment (different address spaces)
zynqmp-ipi-mailbox.c:920:15: expected struct zynqmp_ipi_pdata [noderef] __percpu *pdata
zynqmp-ipi-mailbox.c:920:15: got void *
zynqmp-ipi-mailbox.c:927:56: warning: incorrect type in argument 3 (different address spaces)
zynqmp-ipi-mailbox.c:927:56: expected unsigned int [usertype] *out_value
zynqmp-ipi-mailbox.c:927:56: got unsigned int [noderef] __percpu *
...
and several
drivers/mailbox/zynqmp-ipi-mailbox.c:924:9: warning: dereference of noderef expression
...
sparse warnings.
There were no changes in the resulting object file.
Cc: stable@vger.kernel.org
Fixes: 6ffb163534 ("mailbox: zynqmp: handle SGI for shared IPI")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The Samsung Exynos mailbox controller, used on Google GS101 SoC, has 16
flag bits for hardware interrupt generation and a shared register for
passing mailbox messages. When the controller is used by the
ACPM interface the shared register is ignored and the mailbox controller
acts as a doorbell. The controller just raises the interrupt to APM
after the ACPM interface has written the message to SRAM.
Add support for the Samsung Exynos mailbox controller.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
IPQ5424 mailbox do not have clock support and reuses msm8994_apcs_data.
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
For some SoCs, boot firmware is using the same IPCC instance used
by Linux and it has kept CLEAR_ON_RECV_RD set which basically means
interrupt pending registers are cleared when RECV_ID is read and the
register automatically updates to the next pending interrupt/client
status based on priority.
Clear the CLEAR_ON_RECV_RD if it is set from the boot firmware.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Add a mailbox controller driver for the Microchip Inter-processor
Communication (IPC), which is used to send and receive data between
processors.
The driver uses the RISC-V Supervisor Binary Interface (SBI) to
communicate with software running in machine mode (M-mode) to access
the IPC hardware block.
Additional details on the Microchip vendor extension and the IPC
function IDs described in the driver can be found in the following
documentation:
https://github.com/linux4microchip/microchip-sbi-ecall-extension
This SBI interface in this driver is compatible with the Mi-V Inter-hart
Communication (IHC) IP.
Transmitting and receiving data through the mailbox framework is done
through struct mchp_ipc_msg.
Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Add a dt-binding for the Microchip Inter-Processor Communication (IPC)
mailbox controller.
Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The Tegra RCE (Camera) driver expects the mailbox to be empty before
processing the IVC messages. On RT kernel, the threads processing the
IVC messages (which are invoked after `mbox_chan_received_data()` is
called) may be on a different CPU or running with a higher priority
than the HSP interrupt handler thread. This can cause it to act on the
message before the mailbox gets cleared in the HSP interrupt handler
resulting in a loss of IVC notification.
Fix this by clearing the mailbox data register before calling
`mbox_chan_received_data()`.
Fixes: 8f585d1403 ("mailbox: tegra-hsp: Add tegra_hsp_sm_ops")
Fixes: 74c20dd0f8 ("mailbox: tegra-hsp: Add 128-bit shared mailbox support")
Cc: stable@vger.kernel.org
Signed-off-by: Pekka Pessi <ppessi@nvidia.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
This code accidentally checks ->ctrl_base instead of ->mbox_base so the
error handling can never be triggered.
Fixes: a4123ffab9 ("mailbox: mpfs: support new, syscon based, devicetree configuration")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The devm_ioremap() function doesn't return error pointers, it returns
NULL. Update the error checking to match.
Fixes: 5d4d263e1c ("mailbox: Introduce support for T-head TH1520 Mailbox driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
When the kernel displays "Unable to handle kernel paging request at
virtual address", we would like to confirm the status of the virtual
address in the page table. So add show_pte() before die().
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240723021820.87718-1-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
It was reported that the GFP flags in trace events went from human
readable to just their hex values:
gfp_flags=GFP_HIGHUSER_MOVABLE|__GFP_COMP to gfp_flags=0x140cca
This was caused by a change that added the use of enums in calculating
the GFP flags. As defines get translated into their values in the
trace event format files, the user space tooling could easily convert
the GFP flags into their symbols via the __print_flags() helper macro.
The problem is that enums do not get converted, and the names of the
enums show up in the format files and user space tooling cannot translate
them.
Add TRACE_DEFINE_ENUM() around the enums used for GFP flags which is the
tracing infrastructure macro that informs the tracing subsystem what
the values for enums and it can then expose that to user space.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ4u7AxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgIkAP0VVW80Ck5K9hpDJ3SvSgaGDntSegY7
lI0ExVqGsJz8GQEAzkaRjgGXuXfzGzA9K7ZUe9X4R8W0Xkl9GisvqqEU1Ak=
=rzFM
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.13-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix regression in GFP output in trace events
It was reported that the GFP flags in trace events went from human
readable to just their hex values:
gfp_flags=GFP_HIGHUSER_MOVABLE|__GFP_COMP to gfp_flags=0x140cca
This was caused by a change that added the use of enums in calculating
the GFP flags.
As defines get translated into their values in the trace event format
files, the user space tooling could easily convert the GFP flags into
their symbols via the __print_flags() helper macro.
The problem is that enums do not get converted, and the names of the
enums show up in the format files and user space tooling cannot
translate them.
Add TRACE_DEFINE_ENUM() around the enums used for GFP flags which is
the tracing infrastructure macro that informs the tracing subsystem
what the values for enums and it can then expose that to user space"
* tag 'trace-v6.13-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: gfp: Fix the GFP enum values shown for user space tracing tools