Tariq Toukan says:
====================
mlx5 misc fixes 2025-01-15
This patchset provides misc bug fixes from the team to the mlx5 core and
Eth drivers.
====================
Link: https://patch.msgid.link/20250115113910.1990174-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
According to RFC4303, section "3.3.3. Sequence Number Generation",
the first packet sent using a given SA will contain a sequence
number of 1.
This is applicable to both ESN and non-ESN mode, which was not covered
in commit mentioned in Fixes line.
Fixes: 3d42c8cc67 ("net/mlx5e: Ensure that IPsec sequence packet number starts from 1")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All packet offloads SAs have reqid in it to make sure they have
corresponding policy. While it is not strictly needed for transparent
mode, it is extremely important in tunnel mode. In that mode, policy and
SAs have different match criteria.
Policy catches the whole subnet addresses, and SA catches the tunnel gateways
addresses. The source address of such tunnel is not known during egress packet
traversal in flow steering as it is added only after successful encryption.
As reqid is required for packet offload and it is unique for every SA,
we can safely rely on it only.
The output below shows the configured egress policy and SA by strongswan:
[leonro@vm ~]$ sudo ip x s
src 192.169.101.2 dst 192.169.101.1
proto esp spi 0xc88b7652 reqid 1 mode tunnel
replay-window 0 flag af-unspec esn
aead rfc4106(gcm(aes)) 0xe406a01083986e14d116488549094710e9c57bc6 128
anti-replay esn context:
seq-hi 0x0, seq 0x0, oseq-hi 0x0, oseq 0x0
replay_window 1, bitmap-length 1
00000000
crypto offload parameters: dev eth2 dir out mode packet
[leonro@064 ~]$ sudo ip x p
src 192.170.0.0/16 dst 192.170.0.0/16
dir out priority 383615 ptype main
tmpl src 192.169.101.2 dst 192.169.101.1
proto esp spi 0xc88b7652 reqid 1 mode tunnel
crypto offload parameters: dev eth2 mode packet
Fixes: b3beba1fb4 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If failed to add SF, error handling doesn't delete the SF from the
SF table. But the hw resources are deleted. So when unload driver,
hw resources will be deleted again. Firmware will report syndrome
0x68def3 which means "SF is not allocated can not deallocate".
Fix it by delete SF from SF table if failed to add SF.
Fixes: 2597ee190b ("net/mlx5: Call mlx5_sf_id_erase() once in mlx5_sf_dealloc()")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
User added steering rules at RDMA_TX were being added to the first prio,
which is the counters prio.
Fix that so that they are correctly added to the BYPASS_PRIO instead.
Fixes: 24670b1a31 ("net/mlx5: Add support for RDMA TX steering")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Furong Xu says:
====================
net: stmmac: RX performance improvement
This series improves RX performance a lot, ~40% TCP RX throughput boost
has been observed with DWXGMAC CORE 3.20a running on Cortex-A65 CPUs:
from 2.18 Gbits/sec increased to 3.06 Gbits/sec.
====================
Link: https://patch.msgid.link/cover.1736910454.git.0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The size of DMA descriptors is 32 bytes at most.
net_prefetch() for received frames, and keep prefetch() for descriptors.
This patch brings ~4.8% driver performance improvement in a TCP RX
throughput test with iPerf tool on a single isolated Cortex-A65 CPU
core, 2.92 Gbits/sec increased to 3.06 Gbits/sec.
Suggested-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Current code prefetches cache lines for the received frame first, and
then dma_sync_single_for_cpu() against this frame, this is wrong.
Cache prefetch should be triggered after dma_sync_single_for_cpu().
This patch brings ~2.8% driver performance improvement in a TCP RX
throughput test with iPerf tool on a single isolated Cortex-A65 CPU
core, 2.84 Gbits/sec increased to 2.92 Gbits/sec.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
DMA engine will always write no more than dma_buf_sz bytes of a received
frame into a page buffer, the remaining spaces are unused or used by CPU
exclusively.
Setting page_pool_params.max_len to almost the full size of page(s) helps
nothing more, but wastes more CPU cycles on cache maintenance.
For a standard MTU of 1500, then dma_buf_sz is assigned to 1536, and this
patch brings ~16.9% driver performance improvement in a TCP RX
throughput test with iPerf tool on a single isolated Cortex-A65 CPU
core, from 2.43 Gbits/sec increased to 2.84 Gbits/sec.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Avoid memcpy in non-XDP RX path by marking all allocated SKBs to
be recycled in the upper network stack.
This patch brings ~11.5% driver performance improvement in a TCP RX
throughput test with iPerf tool on a single isolated Cortex-A65 CPU
core, from 2.18 Gbits/sec increased to 2.43 Gbits/sec.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Christoph Hellwig <hch@lst.de> says:
This series has a bunch of cosmetic cleanups for the lockref code I came up
with when reading the code in preparation of adding a new user of it.
* patches from https://lore.kernel.org/r/20250115094702.504610-1-hch@lst.de:
gfs2: use lockref_init for qd_lockref
erofs: use lockref_init for pcl->lockref
dcache: use lockref_init for d_lockref
lockref: add a lockref_init helper
lockref: drop superfluous externs
lockref: use bool for false/true returns
lockref: improve the lockref_get_not_zero description
lockref: remove lockref_put_not_zero
Link: https://lore.kernel.org/r/20250115094702.504610-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a helper to initialize the lockdep, that is initialize the spinlock
and set a value. Having to open code them isn't a big deal, but having
an initializer feels right for a proper primitive.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250115094702.504610-6-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Replace int used as bool with the actual bool type for return values that
can only be true or false.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250115094702.504610-4-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
lockref_put_return returns exactly -1 and not "an error" when the lockref
is dead or locked.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250115094702.504610-3-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
lockref_put_not_zero is not used anywhere, and unless I'm missing
something didn't end up being used used at all. Remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250115094702.504610-2-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix the return type of do_mount() function from long to int to match its ac
tual behavior. The function only returns int values, and all callers, inclu
ding those in fs/namespace.c and arch/alpha/kernel/osf_sys.c, already treat
the return value as int. This change improves type consistency across the
filesystem code and aligns the function signature with its existing impleme
ntation and usage.
Signed-off-by: Sentaro Onizuka <sentaro@amazon.com>
Link: https://lore.kernel.org/r/20250113151400.55512-1-sentaro@amazon.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stephen reports that 'make htmldocs' spits out a warning
("Documentation/virt/kvm/devices/vcpu.rst:147: WARNING: Definition
list ends without a blank line; unexpected unindent.").
Fix it by keeping all the timer attributes on a single line.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marc Zyngier <maz@kernel.org>
There is no need to check the boolean in the work item's prologues since
the boolean can be set at any later time anyway.
The helper which pauses submission sets it and synchronously cancels the
work and helpers which queue the work check for the flag so all should be
good.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250114105942.64832-1-tvrtko.ursulin@igalia.com
The new ASUS ProArt 16" laptop series come with their keyboards stuck in
an Out-Of-Box-Experience mode. While in this mode most functions will
not work such as LED control or Fn key combos. The correct init sequence
is now done to disable this OOBE.
This patch addresses only the ProArt series so far and it is unknown if
there may be others, in which case a new quirk may be required.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Co-developed-by: Connor Belli <connorbelli2003@gmail.com>
Signed-off-by: Connor Belli <connorbelli2003@gmail.com>
Tested-by: Jan Schmidt <jan@centricular.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The property_present() method expects a &CString currently and will work
only with heap allocated C strings.
In order to make it work with compile-time string constants too, change
the argument type to &CStr.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/e97dcbe0418cc1053fb4bcfac65cc02a0afcdf78.1737005078.git.viresh.kumar@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Export model and manufacturer with the power supply properties.
This helps identifing the device in the battery overview.
In the case of the Arctis 9 headset, the manufacturer is prefixed twice in
the device name.
Signed-off-by: Christian Mayer <git@mayer-bgk.de>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Arctis 9 headset provides the information if
the power cable is plugged in and charging via the battery report.
This information can be exported.
Signed-off-by: Christian Mayer <git@mayer-bgk.de>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add support for the SteelSeries Arctis 9 headset. This driver
will export the battery information like it already does for
the Arcits 1 headset.
Signed-off-by: Christian Mayer <git@mayer-bgk.de>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Refactor code and add calls to hid_hw_open/hid_hw_closed in preparation
for adding support for the SteelSeries Arctis 9 headset.
Signed-off-by: Christian Mayer <git@mayer-bgk.de>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The bounding rectangle is adjusted to ensure it aligns to
SSD132X_SEGMENT_WIDTH, which may adjust the pitch. Calculate the pitch
after aligning the left and right edge.
Fixes: fdd591e00a ("drm/ssd130x: Add support for the SSD132x OLED controller family")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115110139.1672488-3-jkeeping@inmusicbrands.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The ssd132x buffer is encoded one pixel per nibble, with two pixels in
each byte. When encoding an 8-bit greyscale input, take the top 4-bits
as the value and ensure the two pixels are distinct and do not overwrite
each other.
Fixes: fdd591e00a ("drm/ssd130x: Add support for the SSD132x OLED controller family")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115110139.1672488-2-jkeeping@inmusicbrands.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Since commit 298f342245 ("xfs: lockless buffer lookup") the buffer
lookup fastpath is done without a hash-wide lock (then pag_buf_lock, now
bc_lock) and only under RCU protection. But this means that nothing
serializes lookups against the temporary 0 reference count for buffers
that are added to the LRU after dropping the last regular reference,
and a concurrent lookup would fail to find them.
Fix this by doing all b_hold modifications under b_lock. We're already
doing this for release so this "only" ~ doubles the b_lock round trips.
We'll later look into the lockref infrastructure to optimize the number
of lock round trips again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Commit 32dd4f9c50 ("xfs: remove a superflous hash lookup when inserting
new buffers") converted xfs_buf_find_insert to use
rhashtable_lookup_get_insert_fast and thus an operation that returns the
existing buffer when an insert would duplicate the hash key. But this
code path misses the check for a buffer with a reference count of zero,
which could lead to reusing an about to be freed buffer. Fix this by
using the same atomic_inc_not_zero pattern as xfs_buf_insert.
Fixes: 32dd4f9c50 ("xfs: remove a superflous hash lookup when inserting new buffers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: stable@vger.kernel.org # v6.0
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The recent conversion of brcmstb_l2_mask_and_ack() to
irq_gc_mask_disable_and_ack_set() missed that the driver can be built as a
module, but the generic function is not exported.
Add the missing export.
[ tglx: Converted it to a fix ]
Fixes: dd1f17a9fa ("irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function")
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250116005920.626822-1-linux@treblig.org
If a timer is deferrable and NO_HZ_COMMON is enabled, get_timer_cpu_base()
and get_timer_this_cpu_base() invoke per_cpu_ptr() and this_cpu_ptr()
twice.
While this seems to be cheap, get_timer_cpu_base() can be called in a loop
in lock_timer_base().
Optimize the functions by updating the base index for deferrable timers and
retrieving the actual base pointer once.
In both cases the resulting assembly code of those helpers becomes smaller,
which results in a ~30% execution time reduction for a lock_timer_base()
micro bench mark.
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241231150115.1978342-1-quic_zhonhan@quicinc.com
On 32bit systems the addition operations in ipc_msg_alloc() can
potentially overflow leading to memory corruption.
Add bounds checking using KSMBD_IPC_MAX_PAYLOAD to avoid overflow.
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd.mount will give each interfaces list and bind_interfaces_only flags
to ksmbd server. Previously, the interfaces list was sent only
when bind_interfaces_only was enabled.
ksmbd server browse only interfaces list given from ksmbd.conf on
FSCTL_QUERY_INTERFACE_INFO IOCTL.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd_rpc_rap() was added in 2021 as part of
commit 0626e6641f ("cifsd: add server handler for central processing and
tranport layers")
ksmbd_vfs_posix_lock_wait_timeout() was added in 2021 as part of
commit f441584858 ("cifsd: add file operations")
both have remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In zswap_cpu_comp_prepare(), allocations are made and assigned to various
members of acomp_ctx under acomp_ctx->mutex. However, allocations may
recurse into zswap through reclaim, trying to acquire the same mutex and
deadlocking.
Move the allocations before the mutex critical section. Only the
initialization of acomp_ctx needs to be done with the mutex held.
Link: https://lkml.kernel.org/r/20250113214458.2123410-1-yosryahmed@google.com
Fixes: 12dcb0ef54 ("mm: zswap: properly synchronize freeing resources during CPU hotunplug")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
syzkaller reported such a BUG_ON():
------------[ cut here ]------------
kernel BUG at mm/khugepaged.c:1835!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
...
CPU: 6 UID: 0 PID: 8009 Comm: syz.15.106 Kdump: loaded Tainted: G W 6.13.0-rc6 #22
Tainted: [W]=WARN
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : collapse_file+0xa44/0x1400
lr : collapse_file+0x88/0x1400
sp : ffff80008afe3a60
...
Call trace:
collapse_file+0xa44/0x1400 (P)
hpage_collapse_scan_file+0x278/0x400
madvise_collapse+0x1bc/0x678
madvise_vma_behavior+0x32c/0x448
madvise_walk_vmas.constprop.0+0xbc/0x140
do_madvise.part.0+0xdc/0x2c8
__arm64_sys_madvise+0x68/0x88
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0x128
el0t_64_sync_handler+0xc8/0xd0
el0t_64_sync+0x190/0x198
This indicates that the pgoff is unaligned. After analysis, I confirm the
vma is mapped to /dev/zero. Such a vma certainly has vm_file, but it is
set to anonymous by mmap_zero(). So even if it's mmapped by 2m-unaligned,
it can pass the check in thp_vma_allowable_order() as it is an
anonymous-mmap, but then be collapsed as a file-mmap.
It seems the problem has existed for a long time, but actually, since we
have khugepaged_max_ptes_none check before, we will skip collapse it as it
is /dev/zero and so has no present page. But commit d8ea7cc854 limit
the check for only khugepaged, so the BUG_ON() can be triggered by
madvise_collapse().
Add vma_is_anonymous() check to make such vma be processed by
hpage_collapse_scan_pmd().
Link: https://lkml.kernel.org/r/20250111034511.2223353-1-liushixin2@huawei.com
Fixes: d8ea7cc854 ("mm/khugepaged: add flag to predicate khugepaged-only behavior")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mattew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fixes an issue where the use of an unsigned data type in
`shmem_parse_opt_casefold()` caused incorrect evaluation of negative
conditions.
Link: https://lkml.kernel.org/r/20250111-unsignedcompare1601569-v3-1-c861b4221831@gmail.com
Fixes: 58e55efd6c ("tmpfs: Add casefold lookup support")
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hugh Dickens <hughd@google.com>
Cc: Shuah khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>