- Enable the 3.3V Vaux supply if available so devices can request wakeup
with either Beacon or WAKE# (Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Enable the Vaux supply if available
- Verify that if DT specifies a single IRQ for all eDMA channels, it is
named 'dma' (Niklas Cassel)
- Remove qcom edma.nr_irqs initialization, which is redundant since
dw_pcie_edma_irq_verify() initializes it based on whether the DT contains
'dma' (single IRQ) or 'dmaX' (multiple IRQs) (Niklas Cassel)
* pci/controller/dwc-edma:
PCI: qcom-ep: Remove redundant edma.nr_irqs initialization
PCI: dwc: Verify the single eDMA IRQ in dw_pcie_edma_irq_verify()
- Update DT binding example to separate PERST# to a Root Port stanza to
make multiple Root Ports possible in the future (Sai Krishna Musham)
- Add driver support for Root Port PERST# (Sai Krishna Musham)
* pci/controller/amd-mdb:
PCI: amd-mdb: Add support for PCIe RP PERST# signal handling
dt-bindings: PCI: amd-mdb: Add example usage of reset-gpios for PCIe RP PERST#
- Check for errors returned from pci_epc_get(), which returns IS_ERR(), not
NULL on error (Dan Carpenter)
- Fix pci_endpoint_test_ioctl() array underflow (Dan Carpenter)
- Document sysfs interface for BAR assignment of vNTB endpoint functions
(Jerome Brunet)
- Drop superfluous pci_epc_features initialization for unsupported
features; we only have to mention features that *are* supported (Niklas
Cassel)
- Skip IRQ tests if the IRQ is out of range (Christian Bruel)
- Fix pci-epf-test for controllers with fixed-size BARs smaller than
requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the doorbell test
case can be run more than once (Niklas Cassel)
- Check for NULL before releasing DMA channels to avoid a NULL pointer
dereference (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint Kselftest
MSI_TEST test case (Niklas Cassel)
- Set tegra_pcie_epc_features.msi_capable so the pci_endpoint_test can use
the optimal IRQ type (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests don't
overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly skip
future PERST# assertion (Vidya Sagar)
* pci/endpoint:
PCI: tegra194: Handle errors in BPMP response
PCI: tegra194: Reset BARs when running in PCIe endpoint mode
PCI: tegra194: Set pci_epc_features::msi_capable to true
PCI: tegra194: Fix broken tegra_pcie_ep_raise_msi_irq()
PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release
PCI: endpoint: pci-epf-test: Fix doorbell test support
PCI: endpoint: pci-epf-test: Limit PCIe BAR size for fixed BARs
selftests: pci_endpoint: Skip IRQ test if IRQ is out of range.
misc: pci_endpoint_test: Cleanup extra 0 initialization
misc: pci_endpoint_test: Skip IRQ tests if irq is out of range
PCI: endpoint: Drop superfluous pci_epc_features initialization
Documentation: PCI: endpoint: Document BAR assignment
misc: pci_endpoint_test: Fix array underflow in pci_endpoint_test_ioctl()
PCI: endpoint: pci-ep-msi: Fix NULL vs IS_ERR() check in pci_epf_write_msi_msg()
- Correct indentation in qcom,pcie-sa8255p.yaml and
amd,versal2-mdb-host.yaml so they indent with four spaces consistently
(Krzysztof Kozlowski)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from PCIe
devices to specific regions of host memory, to the ti,am65 binding (Jan
Kiszka)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
* pci/dt-binding:
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
dt-bindings: PCI: ti,am65: Extend for use with PVU
dt-bindings: PCI: qcom,pcie-sm8550: Add SM8750 compatible
dt-bindings: PCI: Correct example indentation
- Simplify __pci_find_next_cap_ttl() by replacing magic numbers with
#defines, extracting fields with FIELD_GET(), etc (Hans Zhang)
- Convert __pci_find_next_cap_ttl() to a PCI_FIND_NEXT_CAP() macro that
takes a config space accessor function so we can also use it in cases
where the usual config accessors aren't available (Hans Zhang)
- Similarly convert pci_find_next_ext_capability() to a
PCI_FIND_NEXT_EXT_CAP() macro (Hans Zhang)
- Implement dwc, dwc endpoint, and cadence capability search interfaces on
top of PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP(), replacing the
previous duplicated code (Hans Zhang)
- Search for capabilities in the cadence core instead of hard-coding their
offsets, which are subject to change (Hans Zhang)
* pci/capability-search:
PCI: cadence: Use cdns_pcie_find_*capability() to avoid hardcoding offsets
PCI: cadence: Implement capability search using PCI core APIs
PCI: dwc: ep: Implement capability search using PCI core APIs
PCI: dwc: Implement capability search using PCI core APIs
PCI: Refactor extended capability search into PCI_FIND_NEXT_EXT_CAP()
PCI: Refactor capability search into PCI_FIND_NEXT_CAP()
PCI: Clean up __pci_find_next_cap_ttl() readability
- Add rescan/remove locking when enabling/disabling SR-IOV, which solves
list corruption on s390, where disabling SR-IOV also generates hotplug
events (Niklas Schnelle)
- Add lockdep assertion in pci_stop_and_remove_bus_device() to catch
device removal without appropriate locking (Niklas Schnelle)
* pci/virtualization:
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
- Ensure relaxed tail alignment does not increase min_align when computing
bridge window size, to fix a regression (Ilpo Järvinen)
- Fix bridge window size computation to fix a regression for devices with
undefined PCI class, e.g., Samsung [144d:a5a5] (Ilpo Järvinen)
- Fix error handling during resource resize to fix a regression in amdgpu
(Ilpo Järvinen)
- Align m68k pcibios_enable_device() with other arches (Ilpo Järvinen)
- Remove several sparc pcibios_enable_device() implementations that don't
do anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use pci_enable_resources()
instead (Ilpo Järvinen)
- Refactor and simplify find_bus_resource_of_type() (Ilpo Järvinen)
- Claim bridge windows before setting them up (Ilpo Järvinen)
- Disable non-claimed bridge windows so the kernel's view matches the
hardware configuration (Ilpo Järvinen)
- Use pci_release_resource() instead of release_resource() to reduce code
duplication and increase consistency (Ilpo Järvinen)
- Enable bridges even if bridge window assignment fails (Ilpo Järvinen)
- Preserve bridge window resource type flags when assignment fails because
we may need it later (Ilpo Järvinen)
- Add bridge window selection functions to make the selection consistent
across the several places that do this (Ilpo Järvinen)
- Warn if bridge window cannot be released when resizing BAR (Ilpo
Järvinen)
- Set up bridge resources before enumerating children so we can check
whether child resources are inside bridge windows (Ilpo Järvinen)
* pci/resource:
PCI: Set up bridge resources earlier
PCI: Don't print stale information about resource
PCI: Alter misleading recursion to pci_bus_release_bridge_resources()
PCI: Pass bridge window to pci_bus_release_bridge_resources()
PCI: Add pci_setup_one_bridge_window()
PCI: Refactor remove_dev_resources() to use pbus_select_window()
PCI: Refactor distributing available memory to use loops
PCI: Use pbus_select_window_for_type() during mem window sizing
PCI: Use pbus_select_window() in space available checker
PCI: Rename resource variable from r to res
PCI: Use pbus_select_window_for_type() during IO window sizing
PCI: Use pbus_select_window() during BAR resize
PCI: Warn if bridge window cannot be released when resizing BAR
PCI: Fix finding bridge window in pci_reassign_bridge_resources()
PCI: Add bridge window selection functions
PCI: Add defines for bridge window indexing
PCI: Preserve bridge window resource type flags
PCI: Enable bridge even if bridge window fails to assign
PCI: Use pci_release_resource() instead of release_resource()
PCI: Disable non-claimed bridge window
PCI: Always claim bridge window before its setup
PCI: Refactor find_bus_resource_of_type() logic checks
PCI: Move find_bus_resource_of_type() earlier
MIPS: PCI: Use pci_enable_resources()
sparc/PCI: Remove pcibios_enable_device() as they do nothing extra
m68k/PCI: Use pci_enable_resources() in pcibios_enable_device()
PCI: Fix failure detection during resource resize
PCI: Fix pdev_resources_assignable() disparity
PCI: Ensure relaxed tail alignment does not increase min_align
- Fix a double cleanup of regulators if devm_add_action_or_reset() fails
(Geert Uytterhoeven)
* pci/pwrctrl:
PCI/pwrctrl: Fix device leak at device stop
PCI/pwrctrl: Fix device and OF node leak at bus scan
PCI/pwrctrl: Fix device leak at registration
PCI/pwrctrl: Fix double cleanup on devm_add_action_or_reset() failure
- If a device has already been disconnected, e.g., by a hotplug removal,
don't bother trying to resume it to D0 when detaching the driver (Mario
Limonciello)
- Ensure devices are powered up before config reads for 'max_link_width',
'current_link_speed', 'current_link_width', 'secondary_bus_number', and
'subordinate_bus_number' sysfs files (Brian Norris)
* pci/pm:
PCI/sysfs: Ensure devices are powered for config reads
PCI/PM: Skip resuming to D0 if device is disconnected
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
- Make pci_has_p2pmem() static (Leon Romanovsky)
* pci/p2pdma:
PCI/P2PDMA: Reduce scope of pci_has_p2pmem()
PCI/P2PDMA: Fix incorrect pointer usage in devm_kfree() call
- Leave parent unit address 0 in 'interrupt-map' so we can build this
property even when interrupt controllers lack 'reg' properties (Lorenzo
Pieralisi)
* pci/of:
PCI: of: Update parent unit address generation in of_pci_prop_intr_map()
- Use PCI_HEADER_TYPE_* defines, not hard-coded values (Ilpo Järvinen)
- Clean up early_dump_pci_device() to avoid hard-coded values (Ilpo
Järvinen)
- Clean up pci_scan_child_bus_extend() loop to avoid hard-coded values
(Ilpo Järvinen)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read Request
Size to 128B to avoid a performance issue (Ilpo Järvinen)
* pci/enumeration:
PCI: Add Extended Tag + MRRS quirk for Xeon 6
PCI: Clean up pci_scan_child_bus_extend() loop
PCI: Clean up early_dump_pci_device()
PCI: Use header type defines in pci_setup_device()
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM (Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
* pci/aspm:
PCI: qcom: Remove custom ASPM enablement code
PCI/ASPM: Enable all ClockPM and ASPM states for devicetree platforms
- Allow drivers to request a Bus Reset on Non-Fatal Errors (Lukas Wunner)
- Send uevents for subordinate devices (not the bridge) on failure to
recover from errors on the subordinate devices (Lukas Wunner)
- Notify drivers by calling their err_handler.error_detected() callback on
failure to recover (Lukas Wunner)
- Update device error_state earlier after reset to align AER and EEH error
recovery (Lukas Wunner)
- Remove obsolete comments about .link_reset(), which was removed long ago
(Lukas Wunner)
- Emit a uevent for the beginning of error recovery if driver requests a
reset (Niklas Schnelle)
- Emit error recover uevents on s390 as is done by EEH and AER (Niklas
Schnelle)
- Include error_detected() result in AER uevent to align with corresponding
uevents from EEH and s390 (Niklas Schnelle)
- Decode new errors added in PCIe r6.0 (Lukas Wunner)
- Print TLP Log for errors introduced since PCIe spec r1.1 (Lukas Wunner)
- Check for allocation failure in pci_aer_init() (Vernon Yang)
- Update error recovery documentation to match the current code and use
consistent nomenclature (Lukas Wunner)
- Avoid NULL pointer dereference in aer_ratelimit() when GHES error info
points to a device with no AER Capability (Breno Leitao)
* pci/aer:
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
Documentation: PCI: Fix typos
Documentation: PCI: Tidy error recovery doc's PCIe nomenclature
Documentation: PCI: Amend error recovery doc with DPC/AER specifics
Documentation: PCI: Sync error recovery doc with code
Documentation: PCI: Sync AER doc with code
PCI/AER: Fix NULL pointer access by aer_info
PCI/AER: Print TLP Log for errors introduced since PCIe r1.1
PCI/AER: Support errors introduced by PCIe r6.0
powerpc/eeh: Use result of error_detected() in uevent
s390/pci: Use pci_uevent_ers() in PCI recovery
PCI/AER: Fix missing uevent on recovery when a reset is requested
PCI/ERR: Remove remnants of .link_reset() callback
PCI/ERR: Update device error_state already after reset
PCI/ERR: Notify drivers on failure to recover
PCI/ERR: Fix uevent on failure to recover
PCI/AER: Allow drivers to opt in to Bus Reset on Non-Fatal Errors
When s_start() fails to allocate memory for set_event_iter, it returns NULL
before acquiring event_mutex. However, the corresponding s_stop() function
always tries to unlock the mutex, causing a lock imbalance warning:
WARNING: bad unlock balance detected!
6.17.0-rc7-00175-g2b2e0c04f78c #7 Not tainted
-------------------------------------
syz.0.85611/376514 is trying to release lock (event_mutex) at:
[<ffffffff8dafc7a4>] traverse.part.0.constprop.0+0x2c4/0x650 fs/seq_file.c:131
but there are no more locks to release!
The issue was introduced by commit b355247df1 ("tracing: Cache ':mod:'
events for modules not loaded yet") which added the kzalloc() allocation before
the mutex lock, creating a path where s_start() could return without locking
the mutex while s_stop() would still try to unlock it.
Fix this by unconditionally acquiring the mutex immediately after allocation,
regardless of whether the allocation succeeded.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250929113238.3722055-1-sashal@kernel.org
Fixes: b355247df1 ("tracing: Cache ":mod:" events for modules not loaded yet")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The devm_kzalloc() function returns NULL on error so check for that
instead of error pointers.
Fixes: d952bba3fb ("mfd: ls2kbmc: Add Loongson-2K BMC reset function support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <df80c6d61229eb8f877c3694525c0f97e64a43e8.1759478975.git.dan.carpenter@linaro.org>
Signed-off-by: Corey Minyard <corey@minyard.net>
- Add support for Loongson-2K1000 and Loongson-2K0500 NAND controllers,
including extra features, such as chip select and 6-byte NAND ID
reading support.
- Drop the s3c2410 driver.
* SPI NAND:
- Important SPI NAND continuous read improvements and fixes.
- Add support for FudanMicro FM25S01A.
- Add support for continuous reads in Gigadevice vendor driver.
* ECC:
- Add support for the Realtek ECC engine.
This PR comes with the usual amount of various miscellaneous fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmjf6VUACgkQJWrqGEe9
VoT9Ugf9GBzlUARxF8xp5cpEKS3D5Qq/QYg/Xil/shoMfkCSw7MJfLG/tNayCXzx
hSuE8LjVpNV+7lek7UVqSJxbIBBWm7lzu8Jp7ZUCLkDHqdeJ56hUq6HozLfCjsp1
2cIq7Turwhr/YpMTr0if1gxXccOyIuAJcYqmFhfePFBAkT+ek86SY7R5FoJLtMg4
FdbSBr5eC/rRkW2p2xgraf2/A2VRfZwl+DsoJmsqsbB3hreNbUaL7tXI/fE3yePL
rd0vHEPmOshZdgmlCxZDIl7LFRr6T7OCkgCY7tptWeOywCdjBHtiY1o5CInUAvIB
QMh5FYf3jSuGBZYMwLbcBnWJvsd6pQ==
=ulBm
-----END PGP SIGNATURE-----
Merge tag 'nand/for-6.18' into mtd/next
* Raw NAND:
- Add support for Loongson-2K1000 and Loongson-2K0500 NAND controllers,
including extra features, such as chip select and 6-byte NAND ID
reading support.
- Drop the s3c2410 driver.
* SPI NAND:
- Important SPI NAND continuous read improvements and fixes.
- Add support for FudanMicro FM25S01A.
- Add support for continuous reads in Gigadevice vendor driver.
* ECC:
- Add support for the Realtek ECC engine.
This PR comes with the usual amount of various miscellaneous fixes.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Notable changes:
- Some flashes can't perform reads or writes with start or end being an
odd number in Octal DTR mode. File systems like UBIFS can request such
reads or writes, causing the transaction to error out. Pad the read or
write transactions with extra bytes to avoid this problem.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQTlUWNzXGEo3bFmyIR4drqP028CQUCaMQgyAAKCRAR4drqP028
CaVmAQDQiYikIbtSPEQbd4GN/mVtSnDdEt7J3SxwI4oRpJv4WwD/WYe0RU6OnAOn
peuZbNC9JaZrztj+JZLcLeHve9aUYQ0=
=K8Yr
-----END PGP SIGNATURE-----
Merge tag 'spi-nor/for-6.18' into mtd/next
SPI NOR changes for 6.18
Notable changes:
- Some flashes can't perform reads or writes with start or end being an
odd number in Octal DTR mode. File systems like UBIFS can request such
reads or writes, causing the transaction to error out. Pad the read or
write transactions with extra bytes to avoid this problem.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The commit afa3701c0e ("cgroup: cgroup.stat.local time accounting")
introduced a seqcount to track freeze timing but initialized it as a
plain seqcount_t using seqcount_init().
However, the write-side critical section in cgroup_do_freeze() holds
the css_set_lock spinlock while calling write_seqcount_begin(). On
PREEMPT_RT kernels, spinlocks do not disable preemption, causing the
lockdep assertion for a plain seqcount_t, which checks for preemption
being disabled, to fail.
This triggers the following warning:
WARNING: CPU: 0 PID: 9692 at include/linux/seqlock.h:221
Fix this by changing the type to seqcount_spinlock_t and initializing
it with seqcount_spinlock_init() to associate css_set_lock with the
seqcount. This allows lockdep to correctly validate that the spinlock
is held during write operations, resolving the assertion failure on all
kernel configurations.
Reported-by: syzbot+27a2519eb4dad86d0156@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=27a2519eb4dad86d0156
Fixes: afa3701c0e ("cgroup: cgroup.stat.local time accounting")
Signed-off-by: Nirbhay Sharma <nirbhay.lkd@gmail.com>
Link: https://lore.kernel.org/r/20251002165510.KtY3IT--@linutronix.de/
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit 68d54ceeec ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the
zero page") attempted to fix ptrace() reading of tags from the zero page
by marking it as PG_mte_tagged during cpu_enable_mte(). The same commit
also changed the ptrace() tag access permission check to the VM_MTE vma
flag while turning the page flag test into a WARN_ON_ONCE().
Attempting to set the PG_mte_tagged flag early with
CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled may either hang (after commit
d77e59a8fc "arm64: mte: Lock a page for MTE tag initialisation") or
have the flags cleared later during page_alloc_init_late(). In addition,
pages_identical() -> memcmp_pages() will reject any comparison with the
zero page as it is marked as tagged.
Partially revert the above commit to avoid setting PG_mte_tagged on the
zero page. Update the __access_remote_tags() warning on untagged pages
to ignore the zero page since it is known to have the tags initialised.
Note that all user mapping of the zero page are marked as pte_special().
The arm64 set_pte_at() will not call mte_sync_tags() on such pages, so
PG_mte_tagged will remain cleared.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 68d54ceeec ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the zero page")
Reported-by: Gergely Kovacs <Gergely.Kovacs2@arm.com>
Cc: stable@vger.kernel.org # 5.10.x
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lance Yang <lance.yang@linux.dev>
Acked-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Lance Yang <lance.yang@linux.dev>
Signed-off-by: Will Deacon <will@kernel.org>
Change the liburing git URL to point to the git.kernel.org servers,
rather than my private git.kernel.dk server. Due to continued AI
scraping of cgit etc, it's becoming quite the chore to maintain a
private git server.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently when both IMA and EVM are in fix mode, the IMA signature will
be reset to IMA hash if a program first stores IMA signature in
security.ima and then writes/removes some other security xattr for the
file.
For example, on Fedora, after booting the kernel with "ima_appraise=fix
evm=fix ima_policy=appraise_tcb" and installing rpm-plugin-ima,
installing/reinstalling a package will not make good reference IMA
signature generated. Instead IMA hash is generated,
# getfattr -m - -d -e hex /usr/bin/bash
# file: usr/bin/bash
security.ima=0x0404...
This happens because when setting security.selinux, the IMA_DIGSIG flag
that had been set early was cleared. As a result, IMA hash is generated
when the file is closed.
Similarly, IMA signature can be cleared on file close after removing
security xattr like security.evm or setting/removing ACL.
Prevent replacing the IMA file signature with a file hash, by preventing
the IMA_DIGSIG flag from being reset.
Here's a minimal C reproducer which sets security.selinux as the last
step which can also replaced by removing security.evm or setting ACL,
#include <stdio.h>
#include <sys/xattr.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
#include <stdlib.h>
int main() {
const char* file_path = "/usr/sbin/test_binary";
const char* hex_string = "030204d33204490066306402304";
int length = strlen(hex_string);
char* ima_attr_value;
int fd;
fd = open(file_path, O_WRONLY|O_CREAT|O_EXCL, 0644);
if (fd == -1) {
perror("Error opening file");
return 1;
}
ima_attr_value = (char*)malloc(length / 2 );
for (int i = 0, j = 0; i < length; i += 2, j++) {
sscanf(hex_string + i, "%2hhx", &ima_attr_value[j]);
}
if (fsetxattr(fd, "security.ima", ima_attr_value, length/2, 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
const char* selinux_value= "system_u:object_r:bin_t:s0";
if (fsetxattr(fd, "security.selinux", selinux_value, strlen(selinux_value), 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
close(fd);
return 0;
}
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Now that a SHA-1 library API is available, use it instead of
crypto_shash. This is simpler and faster.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Select CRYPTO from INTEGRITY_ASYMMETRIC_KEYS, since
INTEGRITY_ASYMMETRIC_KEYS selects several options that depend on CRYPTO.
This unblocks the removal of the CRYPTO selection from SIGNATURE.
SIGNATURE (lib/digsig.c) itself will no longer need CRYPTO, but
INTEGRITY_ASYMMETRIC_KEYS was depending on it indirectly via the chain
SIGNATURE => INTEGRITY_SIGNATURE => INTEGRITY_ASYMMETRIC_KEYS.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
It is allowed to mix Link and Host DMA channels in a way that their index
is different. In this case we would read the LLP from a channel which is
not used or used for other operation.
Such case can be reproduced on cAVS2.5 or ACE1 platforms with soundwire
configuration:
playback to SDW would take Host channel 0 (stream_tag 1) and no Link DMA
used
Second playback to HDMI (HDA) would use Host channel 1 (stream_tag 2) and
Link channel 0 (stream_tag 1).
In this case reading the LLP from channel 2 is incorrect as that is not the
Link channel used for the HDMI playback.
To correct this, we should look up the BE and get the channel used on the
Link side.
Fixes: 67b182bea0 ("ASoC: SOF: Intel: hda: Implement get_stream_position (Linear Link Position)")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a sanity check for the calculated delay value before reporting it to
the application. If the value is clearly invalid, emit a rate limited
warning to kernel log and return a zero delay. This can occur e.g if the
host or link DMA hits a buffer over/underrun condition.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dev_dbg_ratelimited() wrapper for snd_sof_pcm specific debug prints
that needs rate limited.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In slab_post_alloc_hook(), kmemleak check is skipped when
gfpflags_allow_spinning() returns false since commit af92793e52
("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Therefore, unconditionally calling kmemleak_not_leak() in
alloc_slab_obj_exts() would trigger the following warning:
kmemleak: Trying to color unknown object at 0xffff8881057f5000 as Grey
Call Trace:
alloc_slab_obj_exts+0x1b5/0x370
__alloc_tagging_slab_alloc_hook+0x9f/0x2d0
__kmalloc_cache_noprof+0x1c4/0x5c0
__set_page_owner+0x10d/0x1c0
post_alloc_hook+0x84/0xf0
get_page_from_freelist+0x73b/0x1380
__alloc_frozen_pages_noprof+0x110/0x2c0
alloc_pages_mpol+0x44/0x140
alloc_slab_page+0xac/0x150
allocate_slab+0x78/0x3a0
___slab_alloc+0x76b/0xed0
__slab_alloc.constprop.0+0x5a/0xb0
Add the allow_spin check in alloc_slab_obj_exts() to eliminate the above
warning.
Fixes: af92793e52 ("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20250930063831.782815-1-ranxiaokai627@163.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Set __entry->dir to the actual "dir" parameter of all trace events
in dma_alloc_class. This struct member was left uninitialized by
mistake.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Fixes: 3afff779a7 ("dma-mapping: trace dma_alloc/free direction")
Cc: stable@vger.kernel.org
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251001061028.412258-1-ptesarik@suse.com
KMSAN reports an uninitialized value issue in dma_map_phys()[1]. This
is a false positive caused by the way the virtual address is handled
in kmsan_handle_dma(). Fix it by translating the physical address to
a virtual address using phys_to_virt().
[1]
BUG: KMSAN: uninit-value in dma_map_phys+0xdc5/0x1060
dma_map_phys+0xdc5/0x1060
dma_map_page_attrs+0xcf/0x130
e1000_xmit_frame+0x3c51/0x78f0
dev_hard_start_xmit+0x22f/0xa30
sch_direct_xmit+0x3b2/0xcf0
__dev_queue_xmit+0x3588/0x5e60
neigh_resolve_output+0x9c5/0xaf0
ip6_finish_output2+0x24e0/0x2d30
ip6_finish_output+0x903/0x10d0
ip6_output+0x331/0x600
mld_sendpack+0xb4a/0x1770
mld_ifc_work+0x1328/0x19b0
process_scheduled_works+0xb91/0x1d80
worker_thread+0xedf/0x1590
kthread+0xd5c/0xf00
ret_from_fork+0x1f5/0x4c0
ret_from_fork_asm+0x1a/0x30
Uninit was created at:
__kmalloc_cache_noprof+0x8f5/0x16b0
syslog_print+0x9a/0xef0
do_syslog+0x849/0xfe0
__x64_sys_syslog+0x97/0x100
x64_sys_call+0x3cf8/0x3e30
do_syscall_64+0xd9/0xfa0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Bytes 0-89 of 90 are uninitialized
Memory access of size 90 starts at ffff8880367ed000
CPU: 1 UID: 0 PID: 1552 Comm: kworker/1:2 Not tainted 6.17.0-next-20250929 #26 PREEMPT(none)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-5.fc42 04/01/2014
Workqueue: mld mld_ifc_work
Fixes: 6eb1e769b2 ("kmsan: convert kmsan_handle_dma to use physical addresses")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251002051024.3096061-1-syoshida@redhat.com
Initialize the uval variable to 0 in xe_late_bind_fw_num_fans() to fix
a potential use of uninitialized variable warning and ensure predictable
behavior.
The variable is passed by reference to xe_pcode_read() which should
populate it on success, but initializing it to 0 provides a safe
default value and follows kernel coding best practices.
v2:
- uval = 0 which serves as both a safe default and the fallback
value when the pcode read operation fails.
v3:
- Handle MMIO failure (Rodrigo)
- The function should probably return the error and make the uval as
pointer-argument, like the pcode_read.
- Change the caller of this function to propagate the error
upwards if mmio failed.
Fixes: 45832bf9c1 ("drm/xe/xe_late_bind_fw: Initialize late binding firmware")
Signed-off-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://lore.kernel.org/r/20251002005648.3185636-1-mallesh.koujalagi@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 07abc16c14)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
When userptr is used on SVM-enabled VMs, a non-NULL
hmm_range::dev_private_owner value might mean that
hmm_range_fault() attempts to return device private pages.
Either that will fail, or the userptr code will not know
how to handle those.
Use NULL for hmm_range::dev_private_owner to migrate
such pages to system. In order to do that, move the
struct drm_gpusvm::device_private_page_owner field to
struct drm_gpusvm_ctx::device_private_page_owner so that
it doesn't remain immutable over the drm_gpusvm lifetime.
v2:
- Don't conditionally compile xe_svm_devm_owner().
- Kerneldoc xe_svm_devm_owner().
Fixes: 9e97874148 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20250930122752.96034-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit ad298d9ec9)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The variable offset is not being initialized, and it is only set inside
a for-loop if entry->name is the same as manifest_entry. In the case
where it is not initialized a non-zero check on offset is potentialy checking
a bogus uninitalized value. Fix this by initializing offset to zero.
Fixes: efa29317a5 ("drm/xe/xe_late_bind_fw: Extract and print version info")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250924102208.9216-1-colin.i.king@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 20f3b28e2e)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
In general, the VFs can't load firmwares so attempt to initialize
the firmware late-bind component leads to errors like:
[] xe 0000:03:00.1: [drm] *ERROR* Late bind component not bound
Fixes: 918bd789d6 ("drm/xe/xe_late_bind_fw: Introduce xe_late_bind_fw")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6190
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://lore.kernel.org/r/20250928174811.198933-3-michal.wajdeczko@intel.com
(cherry picked from commit e35e288090)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This is a VF only function and its name should reflect that to
avoid any confusion. Move the VF check to the caller side.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250928174811.198933-2-michal.wajdeczko@intel.com
(cherry picked from commit b88bb1eefa)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Spell out the syntax instead of only using examples. Particularly
important the <engine-class> part since that's different than
engines_allowed and may confuse users. The same batch buffer is used for
all engines of a certain class.
Cc: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Fixes: e2a9854d80 ("drm/xe/configfs: Allow to select by class only")
Link: https://lore.kernel.org/r/20250924152709.659483-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 47ca7acff4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The following error was reported when building with clang 16.0.6:
In file included from drivers/gpu/drm/xe/xe_pci.c:1104:
>> drivers/gpu/drm/xe/tests/xe_pci.c:214:2: error: initializer \
element is not a compile-time constant
graphics_ip_xelp,
^~~~~~~~~~~~~~~~
drivers/gpu/drm/xe/tests/xe_pci.c:221:2: error: initializer \
element is not a compile-time constant
media_ip_xem,
^~~~~~~~~~~~
2 errors generated.
Fix that by explicit re-definition of pre-GMDID IPs, as there are
not so many of them.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509192041.tQwdE4DS-lkp@intel.com/
Fixes: 5bb5258e35 ("drm/xe/tests: Add pre-GMDID IP descriptors to param generators")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250922101207.192028-1-michal.wajdeczko@intel.com
(cherry picked from commit 2de80e2da7)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
We missed to call dput() on the grabbed dentry.
Fixes: f1a49c1b11 ("f2fs: show the list of donation files")
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- The 3 patch series "ida: Remove the ida_simple_xxx() API" from
Christophe Jaillet completes the removal of this legacy IDR API.
- The 9 patch series "panic: introduce panic status function family"
from Jinchao Wang provides a number of cleanups to the panic code and
its various helpers, which were rather ad-hoc and scattered all over the
place.
- The 5 patch series "tools/delaytop: implement real-time keyboard
interaction support" from Fan Yu adds a few nice user-facing usability
changes to the delaytop monitoring tool.
- The 3 patch series "efi: Fix EFI boot with kexec handover (KHO)" from
Evangelos Petrongonas fixes a panic which was happening with the
combination of EFI and KHO.
- The 2 patch series "Squashfs: performance improvement and a sanity
check" from Phillip Lougher teaches squashfs's lseek() about
SEEK_DATA/SEEK_HOLE. A mere 150x speedup was measured for a well-chosen
microbenchmark.
- Plus another 50-odd singleton patches all over the place.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaN78zwAKCRDdBJ7gKXxA
jhLeAQCddTv0XtSUTrvBvmrJVUBrQQeJc+LtNopMIjfAF/WAWAEAogSVKxg+HHEB
GaVixx4zDriNzEqrqiCx9rm4l+YooQA=
=XRe0
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ida: Remove the ida_simple_xxx() API" from Christophe Jaillet
completes the removal of this legacy IDR API
- "panic: introduce panic status function family" from Jinchao Wang
provides a number of cleanups to the panic code and its various
helpers, which were rather ad-hoc and scattered all over the place
- "tools/delaytop: implement real-time keyboard interaction support"
from Fan Yu adds a few nice user-facing usability changes to the
delaytop monitoring tool
- "efi: Fix EFI boot with kexec handover (KHO)" from Evangelos
Petrongonas fixes a panic which was happening with the combination of
EFI and KHO
- "Squashfs: performance improvement and a sanity check" from Phillip
Lougher teaches squashfs's lseek() about SEEK_DATA/SEEK_HOLE. A mere
150x speedup was measured for a well-chosen microbenchmark
- plus another 50-odd singleton patches all over the place
* tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (75 commits)
Squashfs: reject negative file sizes in squashfs_read_inode()
kallsyms: use kmalloc_array() instead of kmalloc()
MAINTAINERS: update Sibi Sankar's email address
Squashfs: add SEEK_DATA/SEEK_HOLE support
Squashfs: add additional inode sanity checking
lib/genalloc: fix device leak in of_gen_pool_get()
panic: remove CONFIG_PANIC_ON_OOPS_VALUE
ocfs2: fix double free in user_cluster_connect()
checkpatch: suppress strscpy warnings for userspace tools
cramfs: fix incorrect physical page address calculation
kernel: prevent prctl(PR_SET_PDEATHSIG) from racing with parent process exit
Squashfs: fix uninit-value in squashfs_get_parent
kho: only fill kimage if KHO is finalized
ocfs2: avoid extra calls to strlen() after ocfs2_sprintf_system_inode_name()
kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths
sched/task.h: fix the wrong comment on task_lock() nesting with tasklist_lock
coccinelle: platform_no_drv_owner: handle also built-in drivers
coccinelle: of_table: handle SPI device ID tables
lib/decompress: use designated initializers for struct compress_format
efi: support booting with kexec handover (KHO)
...
- The 3 patch series "mm, swap: improve cluster scan strategy" from
Kairui Song improves performance and reduces the failure rate of swap
cluster allocation.
- The 4 patch series "support large align and nid in Rust allocators"
from Vitaly Wool permits Rust allocators to set NUMA node and large
alignment when perforning slub and vmalloc reallocs.
- The 2 patch series "mm/damon/vaddr: support stat-purpose DAMOS" from
Yueyang Pan extend DAMOS_STAT's handling of the DAMON operations sets
for virtual address spaces for ops-level DAMOS filters.
- The 3 patch series "execute PROCMAP_QUERY ioctl under per-vma lock"
from Suren Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps.
- The 2 patch series "mm/mincore: minor clean up for swap cache
checking" from Kairui Song performs some cleanup in the swap code.
- The 11 patch series "mm: vm_normal_page*() improvements" from David
Hildenbrand provides code cleanup in the pagemap code.
- The 5 patch series "add persistent huge zero folio support" from
Pankaj Raghav provides a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero.
- The 3 patch series "kho: fixes and cleanups" from Mike Rapoport adds a
few touchups to the recently added Kexec Handover feature.
- The 10 patch series "mm: make mm->flags a bitmap and 64-bit on all
arches" from Lorenzo Stoakes turns mm_struct.flags into a bitmap. To
end the constant struggle with space shortage on 32-bit conflicting with
64-bit's needs.
- The 2 patch series "mm/swapfile.c and swap.h cleanup" from Chris Li
cleans up some swap code.
- The 7 patch series "selftests/mm: Fix false positives and skip
unsupported tests" from Donet Tom fixes a few things in our selftests
code.
- The 7 patch series "prctl: extend PR_SET_THP_DISABLE to only provide
THPs when advised" from David Hildenbrand "allows individual processes
to opt-out of THP=always into THP=madvise, without affecting other
workloads on the system".
It's a long story - the [1/N] changelog spells out the considerations.
- The 11 patch series "Add and use memdesc_flags_t" from Matthew Wilcox
gets us started on the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc.
- The 3 patch series "Tiny optimization for large read operations" from
Chi Zhiling improves the efficiency of the pagecache read path.
- The 5 patch series "Better split_huge_page_test result check" from Zi
Yan improves our folio splitting selftest code.
- The 2 patch series "test that rmap behaves as expected" from Wei Yang
adds some rmap selftests.
- The 3 patch series "remove write_cache_pages()" from Christoph Hellwig
removes that function and converts its two remaining callers.
- The 2 patch series "selftests/mm: uffd-stress fixes" from Dev Jain
fixes some UFFD selftests issues.
- The 3 patch series "introduce kernel file mapped folios" from Boris
Burkov introduces the concept of "kernel file pages". Using these
permits btrfs to account its metadata pages to the root cgroup, rather
than to the cgroups of random inappropriate tasks.
- The 2 patch series "mm/pageblock: improve readability of some
pageblock handling" from Wei Yang provides some readability improvements
to the page allocator code.
- The 11 patch series "mm/damon: support ARM32 with LPAE" from SeongJae
Park teaches DAMON to understand arm32 highmem.
- The 4 patch series "tools: testing: Use existing atomic.h for
vma/maple tests" from Brendan Jackman performs some code cleanups and
deduplication under tools/testing/.
- The 2 patch series "maple_tree: Fix testing for 32bit compiles" from
Liam Howlett fixes a couple of 32-bit issues in
tools/testing/radix-tree.c.
- The 2 patch series "kasan: unify kasan_enabled() and remove
arch-specific implementations" from Sabyrzhan Tasbolatov moves KASAN
arch-specific initialization code into a common arch-neutral
implementation.
- The 3 patch series "mm: remove zpool" from Johannes Weiner removes
zspool - an indirection layer which now only redirects to a single thing
(zsmalloc).
- The 2 patch series "mm: task_stack: Stack handling cleanups" from
Pasha Tatashin makes a couple of cleanups in the fork code.
- The 37 patch series "mm: remove nth_page()" from David Hildenbrand
makes rather a lot of adjustments at various nth_page() callsites,
eventually permitting the removal of that undesirable helper function.
- The 2 patch series "introduce kasan.write_only option in hw-tags" from
Yeoreum Yun creates a KASAN read-only mode for ARM, using that
architecture's memory tagging feature. It is felt that a read-only mode
KASAN is suitable for use in production systems rather than debug-only.
- The 3 patch series "mm: hugetlb: cleanup hugetlb folio allocation"
from Kefeng Wang does some tidying in the hugetlb folio allocation code.
- The 12 patch series "mm: establish const-correctness for pointer
parameters" from Max Kellermann makes quite a number of the MM API
functions more accurate about the constness of their arguments. This
was getting in the way of subsystems (in this case CEPH) when they
attempt to improving their own const/non-const accuracy.
- The 7 patch series "Cleanup free_pages() misuse" from Vishal Moola
fixes a number of code sites which were confused over when to use
free_pages() vs __free_pages().
- The 3 patch series "Add Rust abstraction for Maple Trees" from Alice
Ryhl makes the mapletree code accessible to Rust. Required by nouveau
and by its forthcoming successor: the new Rust Nova driver.
- The 2 patch series "selftests/mm: split_huge_page_test:
split_pte_mapped_thp improvements" from David Hildenbrand adds a fix and
some cleanups to the thp selftesting code.
- The 14 patch series "mm, swap: introduce swap table as swap cache
(phase I)" from Chris Li and Kairui Song is the first step along the
path to implementing "swap tables" - a new approach to swap allocation
and state tracking which is expected to yield speed and space
improvements. This patchset itself yields a 5-20% performance benefit
in some situations.
- The 3 patch series "Some ptdesc cleanups" from Matthew Wilcox utilizes
the new memdesc layer to clean up the ptdesc code a little.
- The 3 patch series "Fix va_high_addr_switch.sh test failure" from
Chunyu Hu fixes some issues in our 5-level pagetable selftesting code.
- The 2 patch series "Minor fixes for memory allocation profiling" from
Suren Baghdasaryan addresses a couple of minor issues in relatively new
memory allocation profiling feature.
- The 3 patch series "Small cleanups" from Matthew Wilcox has a few
cleanups in preparation for more memdesc work.
- The 2 patch series "mm/damon: add addr_unit for DAMON_LRU_SORT and
DAMON_RECLAIM" from Quanmin Yan makes some changes to DAMON in
furtherance of supporting arm highmem.
- The 2 patch series "selftests/mm: Add -Wunreachable-code and fix
warnings" from Muhammad Anjum adds that compiler check to selftests code
and fixes the fallout, by removing dead code.
- The 10 patch series "Improvements to Victim Process Thawing and OOM
Reaper Traversal Order" from zhongjinji makes a number of improvements
in the OOM killer: mainly thawing a more appropriate group of victim
threads so they can release resources.
- The 5 patch series "mm/damon: misc fixups and improvements for 6.18"
from SeongJae Park is a bunch of small and unrelated fixups for DAMON.
- The 7 patch series "mm/damon: define and use DAMON initialization
check function" from SeongJae Park implement reliability and
maintainability improvements to a recently-added bug fix.
- The 2 patch series "mm/damon/stat: expose auto-tuned intervals and
non-idle ages" from SeongJae Park provides additional transparency to
userspace clients of the DAMON_STAT information.
- The 2 patch series "Expand scope of khugepaged anonymous collapse"
from Dev Jain removes some constraints on khubepaged's collapsing of
anon VMAs. It also increases the success rate of MADV_COLLAPSE against
an anon vma.
- The 2 patch series "mm: do not assume file == vma->vm_file in
compat_vma_mmap_prepare()" from Lorenzo Stoakes moves us further towards
removal of file_operations.mmap(). This patchset concentrates upon
clearing up the treatment of stacked filesystems.
- The 6 patch series "mm: Improve mlock tracking for large folios" from
Kiryl Shutsemau provides some fixes and improvements to mlock's tracking
of large folios. /proc/meminfo's "Mlocked" field became more accurate.
- The 2 patch series "mm/ksm: Fix incorrect accounting of KSM counters
during fork" from Donet Tom fixes several user-visible KSM stats
inaccuracies across forks and adds selftest code to verify these
counters.
- The 2 patch series "mm_slot: fix the usage of mm_slot_entry" from Wei
Yang addresses some potential but presently benign issues in KSM's
mm_slot handling.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaN3cywAKCRDdBJ7gKXxA
jtaPAQDmIuIu7+XnVUK5V11hsQ/5QtsUeLHV3OsAn4yW5/3dEQD/UddRU08ePN+1
2VRB0EwkLAdfMWW7TfiNZ+yhuoiL/AA=
=4mhY
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
-----BEGIN PGP SIGNATURE-----
iQFPBAABCAA5FiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmja74IbFIAAAAAABAAO
bWFudTIsMi41KzEuMTEsMiwyAAoJELvgsHXSRYiacR4H/04aBsr7LZnTJVeZLQwK
HKoOwXBqiQyqPdjKXGKnp7Mh9gRp2W3V11VsYTuDJNUS+Vz5YXW0z8cRnUfZ3SYs
l+GZC3vZeAy2EVJE1U6Mb673hU8vziI80IO2q/tGzaj9a+wC3L0lemc+YFQTwG+u
pMtt8zU2vHRjgkx8TNNqJBBOLLDV+RzIl8pqXVnh4eju6x6ZdreGnjXaePYMdjG0
fXLf9XwIeWREqbfeOCEOB50Ts71kkdiOeskwnJyfCTDT8WTu3zC/dICqfh66e3Gg
8hQKvMsuKpm/FwbtgdB0WvaDjENH6PmY+ubLYVxwvNpcsTSqfe0IYGm+HpUP+TPf
m+Y=
=w+JL
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- A new layer for caching objects for allocation and free via percpu
arrays called sheaves.
The aim is to combine the good parts of SLAB (lower-overhead and
simpler percpu caching, compared to SLUB) without the past issues
with arrays for freeing remote NUMA node objects and their flushing.
It also allows more efficient kfree_rcu(), and cheaper object
preallocations for cases where the exact number of objects is
unknown, but an upper bound is.
Currently VMAs and maple nodes are using this new caching, with a
plan to enable it for all caches and remove the complex SLUB fastpath
based on cpu (partial) slabs and this_cpu_cmpxchg_double().
(Vlastimil Babka, with Liam Howlett and Pedro Falcato for the maple
tree changes)
- Re-entrant kmalloc_nolock(), which allows opportunistic allocations
from NMI and tracing/kprobe contexts.
Building on prior page allocator and memcg changes, it will result in
removing BPF-specific caches on top of slab (Alexei Starovoitov)
- Various fixes and cleanups. (Kuan-Wei Chiu, Matthew Wilcox, Suren
Baghdasaryan, Ye Liu)
* tag 'slab-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (40 commits)
slab: Introduce kmalloc_nolock() and kfree_nolock().
slab: Reuse first bit for OBJEXTS_ALLOC_FAIL
slab: Make slub local_(try)lock more precise for LOCKDEP
mm: Introduce alloc_frozen_pages_nolock()
mm: Allow GFP_ACCOUNT to be used in alloc_pages_nolock().
locking/local_lock: Introduce local_lock_is_locked().
maple_tree: Convert forking to use the sheaf interface
maple_tree: Add single node allocation support to maple state
maple_tree: Prefilled sheaf conversion and testing
tools/testing: Add support for prefilled slab sheafs
maple_tree: Replace mt_free_one() with kfree()
maple_tree: Use kfree_rcu in ma_free_rcu
testing/radix-tree/maple: Hack around kfree_rcu not existing
tools/testing: include maple-shim.c in maple.c
maple_tree: use percpu sheaves for maple_node_cache
mm, vma: use percpu sheaves for vm_area_struct cache
tools/testing: Add support for changes to slab for sheaves
slab: allow NUMA restricted allocations to use percpu sheaves
tools/testing/vma: Implement vm_refcnt reset
slab: skip percpu sheaves for remote object freeing
...
