Nouveau driver is the only user of the drm_encoder_slave API. Rework
necessary bits of drm_encoder_slave into the nouveau_i2c_encoder API and
drop drm_encoder_slave.c from the DRM KMS helper.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250106-nouveau-encoder-slave-v3-2-1d37d2f2c67f@linaro.org
Chrontel CH7006 and Silicon Image sil164 drivers use drm_encoder_slave
interface which is being used only by the nouveau driver. It doesn't
make sense to keep this interface inside the DRM subsystem. In
preparation to moving this set of helpers to the nouveau driver, move
the only two I2C driver that use that interface to the nouveau driver
too.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250106-nouveau-encoder-slave-v3-1-1d37d2f2c67f@linaro.org
Add ACTLR data table for qcom_smmu_500 including corresponding data
entry and set prefetch value by way of a list of compatible strings.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Link: https://lore.kernel.org/r/20241212151402.159102-6-quic_bibekkum@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently in Qualcomm SoCs the default prefetch is set to 1 which allows
the TLB to fetch just the next page table. MMU-500 features ACTLR
register which is implementation defined and is used for Qualcomm SoCs
to have a custom prefetch setting enabling TLB to prefetch the next set
of page tables accordingly allowing for faster translations.
ACTLR value is unique for each SMR (Stream matching register) and stored
in a pre-populated table. This value is set to the register during
context bank initialisation.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Link: https://lore.kernel.org/r/20241212151402.159102-5-quic_bibekkum@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Add an adreno-smmu-priv interface for drm/msm to call into arm-smmu-qcom
and initiate the "Partially Resident Region" (PRR) bit setup or reset
sequence as per request.
This will be used by GPU to setup the PRR bit and related configuration
registers through adreno-smmu private interface instead of directly
poking the smmu hardware.
Suggested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Link: https://lore.kernel.org/r/20241212151402.159102-4-quic_bibekkum@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
qcom_smmu_match_data is static and constant so refactor qcom_smmu to
store single pointer to qcom_smmu_match_data instead of replicating
multiple child members of the same and handle the further dereferences
in the places that want them.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Link: https://lore.kernel.org/r/20241212151402.159102-3-quic_bibekkum@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Default MMU-500 reset operation disables context caching in prefetch
buffer. It is however expected for context banks using the ACTLR
register to retain their prefetch value during reset and runtime
suspend.
Add config 'ARM_SMMU_MMU_500_CPRE_ERRATA' to gate this errata workaround
in default MMU-500 reset operation which defaults to 'Y' and provide
option to disable workaround for context caching in prefetch buffer as
and when needed.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Link: https://lore.kernel.org/r/20241212151402.159102-2-quic_bibekkum@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Kuniyuki Iwashima says:
====================
dev: Hold per-netns RTNL in register_netdev().
Patch 1 adds rtnl_net_lock_killable() and Patch 2 uses it in
register_netdev() and converts it and unregister_netdev() to
per-netns RTNL.
With this and the netdev notifier series [0], ASSERT_RTNL_NET()
for NETDEV_REGISTER [1] wasn't fired on a simplest QEMU setup
like e1000 + x86_64_defconfig + CONFIG_DEBUG_NET_SMALL_RTNL.
[0]: https://lore.kernel.org/netdev/20250104063735.36945-1-kuniyu@amazon.com/
[1]:
---8<---
diff --git a/net/core/rtnl_net_debug.c b/net/core/rtnl_net_debug.c
index f406045cbd0e..c0c30929002e 100644
--- a/net/core/rtnl_net_debug.c
+++ b/net/core/rtnl_net_debug.c
@@ -21,7 +21,6 @@ static int rtnl_net_debug_event(struct notifier_block *nb,
case NETDEV_DOWN:
case NETDEV_REBOOT:
case NETDEV_CHANGE:
- case NETDEV_REGISTER:
case NETDEV_UNREGISTER:
case NETDEV_CHANGEMTU:
case NETDEV_CHANGEADDR:
@@ -60,19 +59,10 @@ static int rtnl_net_debug_event(struct notifier_block *nb,
ASSERT_RTNL();
break;
- /* Once an event fully supports RTNL_NET, move it here
- * and remove "if (0)" below.
- *
- * case NETDEV_XXX:
- * ASSERT_RTNL_NET(net);
- * break;
- */
- }
-
- /* Just to avoid unused-variable error for dev and net. */
- if (0)
+ case NETDEV_REGISTER:
ASSERT_RTNL_NET(net);
+ break;
+ }
return NOTIFY_DONE;
}
---8<---
====================
Link: https://patch.msgid.link/20250104082149.48493-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Let's hold per-netns RTNL of dev_net(dev) in register_netdev()
and unregister_netdev().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
rtnl_lock_killable() is used only in register_netdev()
and will be converted to per-netns RTNL.
Let's unexport it and add the corresponding helper.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In cases where the work done is less than the budget, `fbnic_poll` is
returning 0. This affects the tracing of `napi_poll`. Following is a
snippet of before and after result from `napi_poll` tracepoint. Instead,
returning the work done improves the manual tracing.
Before:
@[10]: 1
...
@[64]: 208175
@[0]: 2128008
After:
@[56]: 86
@[48]: 222
...
@[5]: 1885756
@[6]: 1933841
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250104015316.3192946-1-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Error paths of mtk_devapc_probe() should unmap the memory. Reported by
Smatch:
drivers/soc/mediatek/mtk-devapc.c:292 mtk_devapc_probe() warn: 'ctx->infra_base' from of_iomap() not released on lines: 277,281,286.
Fixes: 0890beb226 ("soc: mediatek: add mt6779 devapc driver")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250104142012.115974-1-krzysztof.kozlowski@linaro.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
ESN context must be synced between software and hardware for both RX
and TX. As the call to xfrm_dev_state_advance_esn() is added for TX,
this patch add the missing logic for TX. So the update is also checked
on every packet sent, to see if need to trigger ESN update worker.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Previously xfrm_dev_state_advance_esn() was added for RX only. But
it's possible that ESN context also need to be synced to hardware for
TX, so call it for outbound in this patch.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add a keypad matrix node for the MT8516/MT8167 SoC.
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241225192631.25017-4-val@packett.cool
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The mt6779-keypad binding specifies using a compatible for the
actual SoC before the generic MT6779 one.
Fixes: a8013418d3 ("arm64: dts: mediatek: mt8183: add keyboard node")
Fixes: 6ff9453765 ("arm64: dts: mediatek: Initial mt8365-evk support")
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241225192631.25017-3-val@packett.cool
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add compatibles for SoCs using this device (mt8183, mt8365, mt8516).
Signed-off-by: Val Packett <val@packett.cool>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241225192631.25017-2-val@packett.cool
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Configure an the ethernet alias to match the ethernet controller (even
if it's off by default). This allows e.g. u-boot to configure the mac
address on boot properly
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250106085737.227622-1-sjoerd@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The OVL hardware capabilities have changed starting from MT8195,
making the MT8183 compatible no longer applicable.
Therefore, it is necessary to remove the MT8183 compatible for OVL.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Fixes: b852ee68fd ("arm64: dts: mt8195: Add display node for vdosys0")
Link: https://lore.kernel.org/r/20241219181531.4282-5-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The OVL hardware capabilities have changed starting from MT8195,
making the MT8183 compatible no longer applicable.
Therefore, it is necessary to update the OVL compatible from MT8183 to
MT8195.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Fixes: 7075b21d1a ("arm64: dts: mediatek: mt8188: Add display nodes for vdosys0")
Link: https://lore.kernel.org/r/20241219181531.4282-4-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Modify rules for both MT8195 and MT8188.
Hardware capabilities include color formats and AFBC are
changed since MT8195, stop using the settings of MT8183.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20241219181531.4282-3-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add compatible strings for the MDP3 OVL hardware components in
MediaTek's MT8188 SoC and it is compatible with the existing
MT8195 MDP OVL components.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241219181531.4282-2-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The Hayato rev5 sku2 and Spherion rev4 variants were designed in
anticipation of shortages of the headphone codec. This never happened.
As far as our records show: the variants were never produced or
shipped, and no such devices were deployed to any lab.
Drop them.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241224084839.2904335-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The Hayato rev5 sku2 and Spherion rev4 variants were designed in
anticipation of shortages of the headphone codec. This never happened.
As far as our records show: the variants were never produced or
shipped, and no such devices were deployed to any lab.
Drop them.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241224084839.2904335-2-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add proc-supply property to cpus on Bananapi R4 board.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241220163838.114786-3-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Bananapi R4 Board contains a MT6682A pmic which is compatible to rt5190a.
Add its node to the i2 controller.
The BananaPi R4 board has a MediaTek MT6682A PMIC, a rebrand of the
Richtek RT5190A chip, connected to the I2C0 bus.
Add the relevant node and, while at it, also configure the regulators
from this PMIC that are used on this board.
Only Buck2/Buck3 voltage can be controlled by software.
BUCK4 input is 5V from BUCK1 output, and the resistor (mapped to RP30/RP31
on BPI-R4) configures BUCK4 output to 1.8V.
LDO input is 3.3V from 3.3VD, and the resistor (mapped to RP38/RP40 on
BPI-R4) configures LDO output to 1.8V.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241220163838.114786-2-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Enable the pci controllers on BPI-R4.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-23-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Enable pwm on Bananapi R4 board.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-22-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Enable usb on Bananapi R4 board.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-21-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Bananapi R4 uses t-phy for usb. Enable its node at board level.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-20-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Bananapi R4 uses an i2c multiplexer for SFP slots, rtc and eeprom.
Add its node to the right i2c controller.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-19-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Enable the I2C0, I2C2 controllers found on the BananaPi R4 board.
Both controllers are not accessible from user and having fixed spare
devices. I2C0 have a pmic connected, I2C2 is used with I2C-multiplexer
for e.g. SFP cages.
The missing I2C1 is connected to GPIO header which can have either GPIO
mode or I2C mode.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-18-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add chosen node on Bananapi R4 board with stdout and default bootargs.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-17-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Enable the debug uart on Bananapi R4 board.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-16-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add additional thermal trips to Bananapi R4 board.
SoC only contains the critical trip.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-15-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Bananapi R4 can use the mmc controller either with sd card or the onboard
emmc. The used device is selected through hardware-switches and probed in
bootloader.
Add devicetree overlays for both mmc configurations.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-14-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add regulator nodes used for mmc to Bananapi R4 board.
This board has 1 MMC controller used for SDMMC and eMMC where only one can
be used at one time, selected by hardware switches. SD uses 3v3 for both
supplies and emmc uses both regulators.
So defining both regulators in board dts and referencing them in the dt
overlay.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-13-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Enable the watchdog on Bananapi R4 board.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-12-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add pcie controllers for mt7988. Reuse mt7986 compatible.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-11-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
USB controller needs phys for working properly.
On mt7988 ssusb0 uses a xs-phy, ssusb uses t-phy.
For now add the t-phy for ssusb1. We can reuse the mt7986 compatible
here.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-10-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The controllers should be enabled at board level if used.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-9-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add operating points defining frequency/voltages of cpu cores.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-8-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
In preparation for adding support for CPU DVFS and clock tables for it,
add the MCUSYS clock controller node.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-7-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add basic thermal-zone node.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-5-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add Low Voltage Thermal Sensor (LVTS) node for mt7988 SoC.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-4-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add devicetree node for MMC controller.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-3-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add memory range handled by ATF to not be touched by linux kernel.
ATF is SoC specific and not board-specific so add it to mt7988.dtsi.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-2-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>