xsk_build_skb() has gone wild with its size and one of the things we can
do about it is to pull out a branch that takes care of metadata handling
and make it a separate function.
While at it, let us add metadata SW support for devices supporting
IFF_TX_SKB_NO_LINEAR flag, that happen to have separate logic for
building skb in xsk's generic xmit path.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250925160009.2474816-4-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of using auxiliary boolean that tracks if we are at first frag
when gathering all elements of skb, same functionality can be achieved
with checking if skb_shared_info::nr_frags is 0.
Remove @first_frag but be careful around xsk_build_skb_zerocopy() and
NULL the skb pointer when it failed so that common error path does not
incorrectly interpret it during decision whether to call kfree_skb().
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250925160009.2474816-3-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We are unnecessarily setting a bunch of skb fields per each processed
descriptor, which is redundant for fragmented frames.
Let us set these respective members for first fragment only. To address
both paths that we have within xsk_build_skb(), move assignments onto
xsk_set_destructor_arg() and rename it to xsk_skb_init_misc().
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250925160009.2474816-2-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
of certain boot command line options, and re-enable CONFIG_PTDUMP
on i386 that was mistakenly turned off in the Kconfig.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=qhdq
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix a CPU topology code regression that caused the mishandling of
certain boot command line options, and re-enable CONFIG_PTDUMP on i386
that was mistakenly turned off in the Kconfig"
* tag 'x86-urgent-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology: Implement topology_is_core_online() to address SMT regression
x86/Kconfig: Reenable PTDUMP on i386
When a module registers a struct_ops, the struct_ops type and its
corresponding map_value type ("bpf_struct_ops_") may reside in different
btf objects, here are four possible case:
+--------+---------------+-------------+---------------------------------+
| |bpf_struct_ops_| xxx_ops | |
+--------+---------------+-------------+---------------------------------+
| case 0 | btf_vmlinux | btf_vmlinux | be used and reg only in vmlinux |
+--------+---------------+-------------+---------------------------------+
| case 1 | btf_vmlinux | mod_btf | INVALID |
+--------+---------------+-------------+---------------------------------+
| case 2 | mod_btf | btf_vmlinux | reg in mod but be used both in |
| | | | vmlinux and mod. |
+--------+---------------+-------------+---------------------------------+
| case 3 | mod_btf | mod_btf | be used and reg only in mod |
+--------+---------------+-------------+---------------------------------+
Currently we figure out the mod_btf by searching with the struct_ops type,
which makes it impossible to figure out the mod_btf when the struct_ops
type is in btf_vmlinux while it's corresponding map_value type is in
mod_btf (case 2).
The fix is to use the corresponding map_value type ("bpf_struct_ops_")
as the lookup anchor instead of the struct_ops type to figure out the
`btf` and `mod_btf` via find_ksym_btf_id(), and then we can locate
the kern_type_id via btf__find_by_name_kind() with the `btf` we just
obtained from find_ksym_btf_id().
With this change the lookup obtains the correct btf and mod_btf for case 2,
preserves correct behavior for other valid cases, and still fails as
expected for the invalid scenario (case 1).
Fixes: 590a008882 ("bpf: libbpf: Add STRUCT_OPS support")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20250926071751.108293-1-alibuda@linux.alibaba.com
Kohli)
- Support fallback trimming values when the fuse is empty in the R-Car
driver (Marek Vasut)
- Remove unneeded semicolon in the Mediatek LVTS driver (Jiapeng
Chong)
- Fix the LMH Kconfig option by selecting QCOM_SCM and take the
opportunity to add the COMPILE_TEST option for the QCom's LMH
feature (Dmitry Baryshkov)
- Fix the missing includes and incorrect error message in the Qcom's
LMH driver (Dmitry Baryshkov)
- Fix comment typo and add the documentation in the Kconfig for the
R-Car Gen3 and Gen4 (Marek Vasut)
- Add Tegra114 SOCTHERM support (Svyatoslav Ryhel)
- Rename the functions name in the driver to be consistent and generic
with the different R-Car platform variants (Wolfram Sang)
- Register the TI K3 J72xx bandgap sensor as a hwmon sensor too
(Michael Walle)
- Add and document the thermal sensor unit reporting the junction
temperature of the RZ/G3S SoC (Claudiu Beznea)
- Support the GRF in the Rockchip driver (Sebastian Reichel)
- Add a temperature IIO sensor channel in the generic thermal ADC
driver (Svyatoslav Ryhel)
- Document the temperature sensor on the QCOM's Glymur platform (Manaf
Meethalavalappu)
- Add and document the thermal sensor unit reporting the junction
temperature of the RZ/G3E SoC (John Madieu)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmjWocMACgkQqDIjiipP
6E9OQQf8CvJJ+iVwvUAghkmO/5lRg+iNbm6sJNrWK3Iu1GQBp+fBOVFVuvW/ZCfk
HY9ko/oj560WeRSJYLjMcH6J29lDDmRXV2Yiw9G4fO4hAO/WnowYbTrXEMXmX9z/
9wwL6BJAVJLnnVgIlSyctiDJJkL9mpKqBrOwnNosGelqcnBUCXIa18oSwOd4Ikcq
64LCkOfEiP7t47hCJyXwlAaJ8eLDRcolz1MQgfJOaw/eEhI43S7oeYQdhqynmEv8
k0SEnI5O6Bjt/0qAqp7J4/yDp6z81eQW1LLgoduY/EOdAgZZo+3FOBAwi09M/+o4
KGJq85qXgXmlMkBA4qSRG1OeMFP1TA==
=AkVV
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge updates of thermal drivers for 6.18-rc1 from Daniel Lezcano:
"- Add the QCS615 compatible DT bindings for QCom platforms (Gaurav
Kohli)
- Support fallback trimming values when the fuse is empty in the R-Car
driver (Marek Vasut)
- Remove unneeded semicolon in the Mediatek LVTS driver (Jiapeng
Chong)
- Fix the LMH Kconfig option by selecting QCOM_SCM and take the
opportunity to add the COMPILE_TEST option for the QCom's LMH
feature (Dmitry Baryshkov)
- Fix the missing includes and incorrect error message in the Qcom's
LMH driver (Dmitry Baryshkov)
- Fix comment typo and add the documentation in the Kconfig for the
R-Car Gen3 and Gen4 (Marek Vasut)
- Add Tegra114 SOCTHERM support (Svyatoslav Ryhel)
- Rename the functions name in the driver to be consistent and generic
with the different R-Car platform variants (Wolfram Sang)
- Register the TI K3 J72xx bandgap sensor as a hwmon sensor too
(Michael Walle)
- Add and document the thermal sensor unit reporting the junction
temperature of the RZ/G3S SoC (Claudiu Beznea)
- Support the GRF in the Rockchip driver (Sebastian Reichel)
- Add a temperature IIO sensor channel in the generic thermal ADC
driver (Svyatoslav Ryhel)
- Document the temperature sensor on the QCOM's Glymur platform (Manaf
Meethalavalappu)
- Add and document the thermal sensor unit reporting the junction
temperature of the RZ/G3E SoC (John Madieu)"
* tag 'thermal-v6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (24 commits)
dt-bindings: thermal: qcom-tsens: Document the Glymur temperature Sensor
thermal/drivers/renesas/rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit
thermal/drivers/thermal-generic-adc: Add temperature sensor channel
dt-bindings: thermal: rockchip: Tighten grf requirements
thermal/drivers/rockchip: Shut up GRF warning
thermal/drivers/rockchip: Unify struct rockchip_tsadc_chip format
thermal/drivers/renesas/rzg3s: Add thermal driver for the Renesas RZ/G3S SoC
dt-bindings: thermal: r9a08g045-tsu: Document the TSU unit
thermal/drivers/k3_j72xx_bandgap: Register sensors with hwmon
thermal/drivers/rcar_gen3: Fix mapping SoCs to generic Gen4 entry
thermal/drivers/tegra: Add Tegra114 specific SOCTHERM driver
dt-bindings: thermal: add Tegra114 soctherm header
thermal/drivers/tegra/soctherm-fuse: Prepare calibration for Tegra114 support
dt-bindings: thermal: Document Tegra114 SOCTHERM Thermal Management System
thermal/drivers/rcar_gen3: Document Gen4 support in Kconfig entry
thermal/drivers/rcar_gen3: Fix comment typo
drivers/thermal/qcom/lmh: Fix incorrect error message
thermal/drivers/qcom/lmh: Add missing IRQ includes
thermal/drivers/qcom: Make LMH select QCOM_SCM
...
1fcc67e3a3 ("of: base: Add for_each_child_of_node_with_prefix()") added
of_get_next_child_with_prefix() but did not add a stub for the !CONFIG_OF
case.
Add a of_get_next_child_with_prefix() stub so users of
for_each_child_of_node_with_prefix() can be built for compile testing even
when !CONFIG_OF.
Fixes: 1fcc67e3a3 ("of: base: Add for_each_child_of_node_with_prefix()")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add compatible string synaptics,synaptics_i2c for synaptics touch pad. It
match existed driver drivers/input/mouse/synaptics_i2c.c.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Currently, the DT bindings for Mediatek PMIC Wrapper is missing the
power-domains property, which is used in the MT8173 E1 evaluation board as
it needs USB power domain.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Current, the DT bindings for MediaTek's MT65xx Pin controller is missing
the gpio-line-names property, add it to the associated schema.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the existing text-based DT bindings for Mediatek MT8173 Video
Processor Unit to a DT schema.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[robh: update MAINTAINERS and mediatek-mdp.txt references]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Update the mediatek,audsys binding to support the mt8183-audiosys
compatible, which uses a different audio controller
(mediatek,mt8183-audio.yaml) compared to the legacy mt2701-audio
controller.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The GCE Mailbox needs only one clock and the clock-names can be
used only by the driver (which, for instance, does not use it),
and this is true for all of the currently supported MediaTek SoCs.
Stop requiring to specify clock-names on all non-MT8195 GCEs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This binding had no compatible and for this reason would not be
applied to anything: add the missing "mediatek,mt6331-regulator"
comaptible.
Fixes: 6385e21692 ("regulator: Add bindings for MT6331 regulator")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This binding was never applied to anything because it misses the
compatible, hence any mistake in it got unnoticed.
Before adding the compatible to let it apply, fix the names and
the node names of various regulators.
Fixes: 6385e21692 ("regulator: Add bindings for MT6331 regulator")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This binding had no compatible and for this reason would not be
applied to anything: add the missing "mediatek,mt6332-regulator"
compatible.
Fixes: e22943e32e regulator: ("Add bindings for MT6332 regulator")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The pin controller for both MT7622 and MT7629 need both a "base"
and an "eint" MMIO like the ones found on other MediaTek SoCs:
while devicetrees have always been correct, the binding is not,
as it only allows an "eint" reg.
Add "base" to reg-names and increment maxItems for reg to two.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The MT7622 SoC has a PWM channel 7-2 group for the pwm7 IP: add
the missing pwm_ch7_2 group.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add a compatible for the General Purpose Timer (GPT) found on the
MediaTek Helio X10 MT6795 SoC which is fully compatible with the
one found in MT6577.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Even though the DPI IP has a reset bit on all MediaTek SoCs, it
is optional, and has always been unused until MT8195; specifically:
on older SoCs, like MT8173, the reset bit is located in MMSYS, and
on newer SoCs, like MT8195, it is located in VDOSYS.
For this reason, allow specifying the resets and reset-names on
all MediaTek SoCs.
Those properties are optional because there are multiple ways to
reset this IP and the reset lines in MM/VDO are used only if the
IP cannot perform warm-reset.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document compatible for the Power Domain Controller(PDC)
block on Glymur.PDC acts as interrupt controller in
SoC states where GIC is non-operational.
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add nvidia,tegra264-agic to the arm,gic binding for tegra264 audio
interrupt controller support.
Signed-off-by: sheetal <sheetal@nvidia.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add innolux,n133hse-ea1 13.3" TFT LCD panel and nlt,nl12880bc20-spwg-24
12.1" WXGA (1280 x 800) LVDS TFT LCD panel.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6q-novena.dtb: /panel: failed to match any schema with compatible: ['innolux,n133hse-ea1']
arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dtb: /lvds0-panel: failed to match any schema with compatible: ['nlt,nl12880bc20-spwg-24']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The exynos8890 uses the ARM Mali T880 GPU, document its compatible
string with the appropriate fallback.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the ASpeed SDRAM EDAC binding to DT schema. It's a
straight-forward conversion.
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Stefan Schaeckeler <sschaeck@cisco.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Merge an adjustment of the new Power Slider interface in the int340x
thermal driver.
* thermal-intel:
thermal: intel: int340x: Power Slider: Validate slider_balance range
Updates lseg creation path to parse and add striped layouts. Enable
support for striped layouts.
Limitations:
1. All mirrors must have the same number of stripes.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Updates the layout stats logic to be stripe aware. Read and write
stats are accumulated on a per DS stripe basis. Also updates error
paths to use dss_id where appropraite.
Limitations:
1. The layout stats structure is still statically sized to 4 and there
is no deduplication logic for deviceids that may appear more than once
in a striped layout.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Updates write path to calculate and use dss_id to direct IO to the
appropriate stripe DS.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Updates the commit path to be stripe aware. This required updating
the ds_commit_idx to be stripe aware.
ds_commit_idx == mirror_idx * dss_count + dss_id.
Updates code paths to utilize the new ds_commit_idx and derive dss_id
& mirror_idx where appropriate to contact the correct DS using the
corresponding parameters.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Updates read path to calculate and use dss_id to direct IO to the
appropriate stripe DS.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Updates common helper functions to be dss_id aware. Most cases simply
add a dss_id parameter. The has_available functions have been updated
with a loop.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Adds a new struct nfs4_ff_layout_ds_stripe that represents a data
server stripe within a layout. A new dynamically allocated array of
this type has been added to nfs4_ff_layout_mirror and per stripe
configuration information has been moved from the mirror type to the
stripe based on the RFC.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
leaving the dl_server stuck, and a dl_server throttling
bug causing lag to fair tasks.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9ZgA
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix two dl_server regressions: a race that can end up leaving the
dl_server stuck, and a dl_server throttling bug causing lag to fair
tasks"
* tag 'sched-urgent-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix dl_server behaviour
sched/deadline: Fix dl_server getting stuck
Correct this path to use ds_commit_idx. Another noop preparation
change. In current code commit_idx == mirror_idx but when striping is
enabled that will not be true.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
No-op preparation change to remove dependency on cred local
variable. Subsequent striping diff has a cred per stripe so this local
variable can't be trusted to be the same.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Tariq Toukan says:
====================
scripts/coccinelle: Symbolic error names script
This small series by Gal adds a new coccinelle script that spots
potential transitions to symbolic error names in print functions, and
then uses it in mlx5 driver.
====================
Link: https://patch.msgid.link/1758192227-701925-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using the coccinelle test introduced in previous commit
(scripts/coccinelle/misc/ptr_err_to_pe.cocci), convert error logging
throughout the mlx5 driver to use the %pe format specifier instead of
PTR_ERR() with integer format specifiers.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Alexei Lazar <alazar@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1758192227-701925-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new Coccinelle script to identify places where PTR_ERR() is used
in print functions and suggest using the %pe format specifier instead.
For printing error pointers (i.e., a pointer for which IS_ERR() is true)
%pe will print a symbolic error name (e.g,. -EINVAL), opposed to the raw
errno (e.g,. -22) produced by PTR_ERR().
It also makes the code cleaner by saving a redundant call to PTR_ERR().
The script supports context, report, and org modes.
Example transformation:
printk("Error: %ld\n", PTR_ERR(ptr)); // Before
printk("Error: %pe\n", ptr); // After
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Alexei Lazar <alazar@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1758192227-701925-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To avoid code duplication and improve clarity, combine the code
paths in power_down() leading to a return from that function.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/3571055.QJadu78ljV@rafael.j.wysocki
[ rjw: Changed the new label name to "exit" ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----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=cYD6
-----END PGP SIGNATURE-----
Merge tag 'v6.17rc7-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix unlink bug
- Fix potential out of bounds access in processing compound requests
* tag 'v6.17rc7-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix wrong index reference in smb2_compound_op()
smb: client: handle unlink(2) of files open by different clients
bpf_xdp_pull_data() is the first kfunc that changes packet data. Make
sure the verifier clear all packet pointers after calling packet data
changing kfunc.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250926164142.1850176-1-ameryhung@gmail.com
- mediatek: Make sure MT8195 AUDIO power domain isn't left powered-on
-----BEGIN PGP SIGNATURE-----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=c/ev
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- mediatek: Make sure MT8195 AUDIO power domain isn't left powered-on
* tag 'pmdomain-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: mediatek: set default off flag for MT8195 AUDIO power domain
Fixes and New HW Supoort
- amd/pmc: Use 8042 quirk for Stellaris Slim Gen6 AMD
- dell: Set USTT mode according to BIOS after reboot
- dell-lis3lv02d: Add Latitude E6530
- lg-laptop: Fix setting the fan mode
The following is an automated shortlog grouped by driver:
amd/pmc:
- Add Stellaris Slim Gen6 AMD to spurious 8042 quirks list
dell-lis3lv02d:
- Add Latitude E6530
dell:
- Set USTT mode according to BIOS after reboot
lg-laptop:
- Fix WMAB call in fan_mode_store()
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaNaJCgAKCRBZrE9hU+XO
MdkhAQDsxiGH0G0bCEzmluHOyBJCGYAU9N2FXr2q4JO2ykzFCAD/e/62TuD6lQuP
75aQV+h2eBn7oOOG576ROTYZ2g8M1gc=
=U7jd
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and New HW Supoort
- amd/pmc: Use 8042 quirk for Stellaris Slim Gen6 AMD
- dell: Set USTT mode according to BIOS after reboot
- dell-lis3lv02d: Add Latitude E6530
- lg-laptop: Fix setting the fan mode"
* tag 'platform-drivers-x86-v6.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lg-laptop: Fix WMAB call in fan_mode_store()
platform/x86: dell-lis3lv02d: Add Latitude E6530
platform/x86/dell: Set USTT mode according to BIOS after reboot
platform/x86/amd/pmc: Add Stellaris Slim Gen6 AMD to spurious 8042 quirks list
