Add a test case for bug resolved with:
'netfilter: nft_set_pipapo_avx2: fix skip of expired entries'.
It passes on nf.git (it uses the generic/C version for insertion
duplicate check) but fails on unpatched nf-next if AVX2 is supported:
cannot create same element twice 0s [FAIL]
Could create element twice in same transaction
table inet filter { # handle 8
[..]
elements = { 1.2.3.4 . 1.2.4.1 counter packets 0 bytes 0,
1.2.4.1 . 1.2.3.4 counter packets 0 bytes 0,
1.2.3.4 . 1.2.4.1 counter packets 0 bytes 0,
1.2.4.1 . 1.2.3.4 counter packets 0 bytes 0 }
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
KASAN reports following splat:
BUG: KASAN: slab-out-of-bounds in pipapo_get_avx2+0x941/0x25d0
Read of size 1 at addr ffff88814c561be0 by task nft/3944
Call Trace:
pipapo_get_avx2+0x941/0x25d0
nft_pipapo_insert+0x440/0x11b0
nf_tables_newsetelem+0x220a/0x3a00
..
This bisects to commit 84c1da7b38 ("netfilter: nft_set_pipapo: use AVX2
algorithm for insertions too").
However, that change merely uncovers this bug.
When we find a match but that match has expired or timed out, the AVX2
implementation restarts the full match loop.
At that point, the pointer to the key data has already been changed and
points to the keys last field.
This will then result in out-of-bounds read once its incremented again
for the next field.
The restart logic in AVX2 is different compared to the plain C
implementation, but both should follow the same logic.
The C implementation just calls pipapo_refill() again do check the next
entry. Do the same in the AVX2 implementation.
Note that with this change, due to implementation differences of
pipapo_refill vs. nft_pipapo_avx2_refill, the refill call will return
the same element again. Then, on the next call, it will move to the next
entry as expected. This is because avx2_refill doesn't clear the bitmap
in the 'last' conditional. This is harmless. Expired/timed out elements
are also not expected to be frequent.
selftest is added in a followup commit.
Fixes: 7400b06396 ("nft_set_pipapo: Introduce AVX2-based lookup implementation")
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
In commit c4eaca2e10 ("netfilter: nft_set_pipapo: don't check genbit from
packetpath lookups") I replaced genmask_cur() with NFT_GENMASK_ANY, but
this change has no effect in the pipapo set type.
New entries are unreachable from the active copy, so NFT_GENMASK_ANY has
same result as genmask_cur():
current-gen elements are disabled and the new-generation
elements cannot be found.
Tests did not catch this incomplete fix because the change also dropped
the genmask test from the AVX2 version of the algorithm, so test only
fails if host cpu lacks AVX2 support.
Use genmask test only from the control plane (inserts, deletions, ..).
Packet path has to skip the check, use of 0 is enough for this because
ext->genmask has a the relevant bit set when the element is INACTIVE
in that generation: using a 0 genmask thus makes nft_set_elem_active()
always return true.
Fix the comment and replace NFT_GENMASK_ANY with 0.
Fixes: c4eaca2e10 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
Signed-off-by: Florian Westphal <fw@strlen.de>
During a batch replay, the nlh pointer is not reset until the parsing of
the commands. Since commit bf2ac490d2 ("netfilter: nfnetlink: Handle
ACK flags for batch messages") that is problematic as the condition to
add an ACK for batch begin will evaluate to true even if NLM_F_ACK
wasn't used for batch begin message.
If there is an error during the command processing, netlink is sending
an ACK despite that. This misleads userspace tools which think that the
return code was 0. Reset the nlh pointer to the original one when a
replay is triggered.
Fixes: bf2ac490d2 ("netfilter: nfnetlink: Handle ACK flags for batch messages")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
On the netns cleanup path, __ip_vs_ftp_exit() may unregister ip_vs_ftp
before connections with valid cp->app pointers are flushed, leading to a
use-after-free.
Fix this by introducing a global `exiting_module` flag, set to true in
ip_vs_ftp_exit() before unregistering the pernet subsystem. In
__ip_vs_ftp_exit(), skip ip_vs_ftp unregister if called during netns
cleanup (when exiting_module is false) and defer it to
__ip_vs_cleanup_batch(), which unregisters all apps after all connections
are flushed. If called during module exit, unregister ip_vs_ftp
immediately.
Fixes: 61b1ab4583 ("IPVS: netns, add basic init per netns.")
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Slavin Liu <slavin452@gmail.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Some distributions (e.g., CachyOS) support building the kernel with -O3,
but doing so may break kfuncs, resulting in their symbols not being
properly exported.
In fact, with gcc -O3, some kfuncs may be optimized away despite being
annotated as noinline. This happens because gcc can still clone the
function during IPA optimizations, e.g., by duplicating or inlining it
into callers, and then dropping the standalone symbol. This breaks BTF
ID resolution since resolve_btfids relies on the presence of a global
symbol for each kfunc.
Currently, this is not an issue for upstream, because we don't allow
building the kernel with -O3, but it may be safer to address it anyway,
to prevent potential issues in the future if compilers become more
aggressive with optimizations.
Therefore, add __noclone to __bpf_kfunc to ensure kfuncs are never
cloned and remain distinct, globally visible symbols, regardless of
the optimization level.
Fixes: 57e7c169cd ("bpf: Add __bpf_kfunc tag for marking kernel functions as kfuncs")
Acked-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Link: https://lore.kernel.org/r/20250924081426.156934-1-arighi@nvidia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiri Olsa says:
====================
we recently had several requests for tetragon to be able to change
user application function return value or divert its execution through
instruction pointer change.
This patchset adds support for uprobe program to change app's registers
including instruction pointer.
v4 changes:
- rebased on bpf-next/master, we will handle the future simple conflict
with tip/perf/core
- changed condition in kprobe_prog_is_valid_access [Andrii]
- added acks
====================
Link: https://patch.msgid.link/20250916215301.664963-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test to check we can't attach kprobe multi program
that writes to the context.
It's x86_64 specific test.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-7-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test to check we can't attach standard kprobe program that
writes to the context.
It's x86_64 specific test.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test to check we can change the application execution
through instruction pointer change through uprobe program.
It's x86_64 specific test.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test to check we can change common register values through
uprobe program.
It's x86_64 specific test.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If uprobe handler changes instruction pointer we still execute single
step) or emulate the original instruction and increment the (new) ip
with its length.
This makes the new instruction pointer bogus and application will
likely crash on illegal instruction execution.
If user decided to take execution elsewhere, it makes little sense
to execute the original instruction, so let's skip it.
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently uprobe (BPF_PROG_TYPE_KPROBE) program can't write to the
context registers data. While this makes sense for kprobe attachments,
for uprobe attachment it might make sense to be able to change user
space registers to alter application execution.
Since uprobe and kprobe programs share the same type (BPF_PROG_TYPE_KPROBE),
we can't deny write access to context during the program load. We need
to check on it during program attachment to see if it's going to be
kprobe or uprobe.
Storing the program's write attempt to context and checking on it
during the attachment.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert the existing text-based DT binding for MT8183 sound cards using
MT6358 and various other codecs to a DT schema.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Link: https://patch.msgid.link/20250826-mtk-dtb-warnings-v3-6-20e89886a20e@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Device Tree binding for MT8183-based boards using the
DA7219 headset codec and optional MAX98357, RT1015 or RT1015P speaker
amplifiers from the legacy .txt format to DT schema.
This improves binding validation and removes DT schema warnings
for boards using these audio components.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Link: https://patch.msgid.link/20250826-mtk-dtb-warnings-v3-5-20e89886a20e@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the MediaTek MT8183 AFE PCM Device Tree binding from the old
.txt format to dt-schema format to improve validation.
While converting, also document all clock inputs and memory-region
used by the AFE block.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Link: https://patch.msgid.link/20250826-mtk-dtb-warnings-v3-2-20e89886a20e@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() uses
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
Explicitly add the WQ_UNBOUND flag to alloc_workqueue() users, marking
the workqueue unbound.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250923145905.327269-2-marco.crivellari@suse.com
[use imperative voice in subject, fix typos]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit 1e06a13751 ("wifi: libertas: WQ_PERCPU added
to alloc_workqueue users") since there's really no reason to use
per-CPU here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20250924020540.234560-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
clang < 17 fails to use scope local labels with CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y:
{
__label__ local_lbl;
...
unsafe_get_user(uval, uaddr, local_lbl);
...
return 0;
local_lbl:
return -EFAULT;
}
when two such scopes exist in the same function:
error: cannot jump from this asm goto statement to one of its possible targets
There are other failure scenarios. Shuffling code around slightly makes it
worse and fail even with one instance.
That issue prevents using local labels for a cleanup based user access
mechanism.
After failed attempts to provide a simple enough test case for the 'depends
on' test in Kconfig, the initial cure was to mark ASM goto broken on clang
versions < 17 to get this road block out of the way.
But Nathan pointed out that this is a known clang issue and indeed affects
clang < version 17 in combination with cleanup(). It's not even required to
use local labels for that.
The clang issue tracker has a small enough test case, which can be used as
a test in the 'depends on' section of CC_HAS_ASM_GOTO_OUTPUT:
void bar(void **);
void* baz(void);
int foo (void) {
{
asm goto("jmp %l0"::::l0);
return 0;
l0:
return 1;
}
void *x __attribute__((cleanup(bar))) = baz();
{
asm goto("jmp %l0"::::l1);
return 42;
l1:
return 0xff;
}
}
Add another dependency to config CC_HAS_ASM_GOTO_OUTPUT for it and use the
clang issue tracker test case for detection by condensing it to obfuscated
C-code contest format. This reliably catches the problem on clang < 17 and
did not show any issues on the non broken GCC versions.
That test might be sufficient to catch all issues and therefore could
replace the existing test, but keeping that around does no harm either.
Thanks to Nathan for pointing to the relevant clang issue!
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1886
Link: f023f5cdb2
copy_process() uses the wrong error exit path from futex_hash_allocate_default().
After exiting from futex_hash_allocate_default(), neither tasklist_lock
nor siglock has been acquired. The exit label bad_fork_core_free unlocks
both of these locks which is wrong.
The next exit label, bad_fork_cancel_cgroup, is the correct exit.
sched_cgroup_fork() did not allocate any resources that need to freed.
Use bad_fork_cancel_cgroup on error exit from futex_hash_allocate_default().
Fixes: 7c4f75a21f ("futex: Allow automatic allocation of process wide futex hash")
Reported-by: syzbot+80cb3cc5c14fad191a10@syzkaller.appspotmail.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Closes: https://lore.kernel.org/all/68cb1cbd.050a0220.2ff435.0599.GAE@google.com
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
-----BEGIN PGP SIGNATURE-----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=PsS2
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.18-2025-09-23' of git://git.infradead.org/nvme into for-6.18/block
Pull NVMe updates from Keith:
" - FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)"
* tag 'nvme-6.18-2025-09-23' of git://git.infradead.org/nvme:
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
nvme-pci: Add TUXEDO IBS Gen8 to Samsung sleep quirk
nvme-auth: use hkdf_expand_label()
nvme-auth: add hkdf_expand_label()
nvme-tcp: send only permitted commands for secure concat
nvme-fc: use lock accessing port_state and rport state
nvmet-fcloop: call done callback even when remote port is gone
nvmet-fc: avoid scheduling association deletion twice
nvmet-fc: move lsop put work to nvmet_fc_ls_req_op
nvme-auth: update bi_directional flag
Add device tree bindings for the common RISC-V Platform Management
Interface (RPMI) shared memory transport as a mailbox controller.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Link: https://lore.kernel.org/r/20250818040920.272664-2-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
My experiment with using corporate Gmail for Linux kernel list
interaction has come to an end. For my MAINTAINERS entries that
use that E-mail address, let's switch those to use the k.org E-mail
forwarding.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The listener -> child locking no longer exists in the fast path
since commit e994b2f0fb ("tcp: do not lock listener to process
SYN packets").
Let's remove the stale comment for reqsk_fastopen_remove().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250923005441.4131554-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sure we return the right pud value and not a value that could
have been overwritten in between by a different core.
Fixes: c3cc2a4a3a ("riscv: Add support for PUD THP")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250814-dev-alex-thp_pud_xchg-v1-1-b4704dfae206@rivosinc.com
[pjw@kernel.org: use xchg rather than atomic_long_xchg; avoid atomic op for !CONFIG_SMP like x86]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Include MLX5E_FEC_RS_544_514_INTERLEAVED_QUAD in the FEC RS stats
handling. This addresses a gap introduced when adding support for
200G/lane link modes.
Fixes: 4e343c11ef ("net/mlx5e: Support FEC settings for 200G per lane link modes")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758525094-816583-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When HWS creates multi-dest FW table and adds rules to
forward to other tables, ignore the flow level enforcement
in FW, because HWS is responsible for table levels.
This fixes the following error:
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:818:(pid 192306):
SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed,
status bad parameter(0x3), syndrome (0x6ae84c), err(-22)
Fixes: 504e536d90 ("net/mlx5: HWS, added actions handling")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758525094-816583-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a kernel trace [1] caused by releasing an HWS action of a local flow
counter in mlx5_cmd_hws_delete_fte(), where the HWS action refcount and
mutex were not initialized and the counter struct could already be freed
when deleting the rule.
Fix it by adding the missing initializations and adding refcount for the
local flow counter struct.
[1] Kernel log:
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x48
mlx5_fs_put_hws_action.part.0.cold+0x21/0x94 [mlx5_core]
mlx5_fc_put_hws_action+0x96/0xad [mlx5_core]
mlx5_fs_destroy_fs_actions+0x8b/0x152 [mlx5_core]
mlx5_cmd_hws_delete_fte+0x5a/0xa0 [mlx5_core]
del_hw_fte+0x1ce/0x260 [mlx5_core]
mlx5_del_flow_rules+0x12d/0x240 [mlx5_core]
? ttwu_queue_wakelist+0xf4/0x110
mlx5_ib_destroy_flow+0x103/0x1b0 [mlx5_ib]
uverbs_free_flow+0x20/0x50 [ib_uverbs]
destroy_hw_idr_uobject+0x1b/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x34/0x1a0 [ib_uverbs]
uobj_destroy+0x3c/0x80 [ib_uverbs]
ib_uverbs_run_method+0x23e/0x360 [ib_uverbs]
? uverbs_finalize_object+0x60/0x60 [ib_uverbs]
ib_uverbs_cmd_verbs+0x14f/0x2c0 [ib_uverbs]
? do_tty_write+0x1a9/0x270
? file_tty_write.constprop.0+0x98/0xc0
? new_sync_write+0xfc/0x190
ib_uverbs_ioctl+0xd7/0x160 [ib_uverbs]
__x64_sys_ioctl+0x87/0xc0
do_syscall_64+0x59/0x90
Fixes: b581f42669 ("net/mlx5: fs, manage flow counters HWS action sharing by refcount")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758525094-816583-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Timestamping configuration through ethtool has inconsistent behavior of
skipping the reply for set command if configuration was not changed. Fix
it be providing reply in any case.
Fixes: 6e9e2eed4f ("net: ethtool: Add support for tsconfig command to get/set hwtstamp config")
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250922231924.2769571-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous patch fixed an issue whereby no FDB entry would be created for
the bridge itself on VLAN 0 under some circumstances. This could break
forwarding. Add a test for the fix.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/137cc25396f5a4f407267af895a14bc45552ba5f.1758550408.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, after the bridge is created, the FDB does not hold an FDB entry
for the bridge MAC on VLAN 0:
# ip link add name br up type bridge
# ip -br link show dev br
br UNKNOWN 92:19:8c:4e:01:ed <BROADCAST,MULTICAST,UP,LOWER_UP>
# bridge fdb show | grep 92:19:8c:4e:01:ed
92:19:8c:4e:01:ed dev br vlan 1 master br permanent
Later when the bridge MAC is changed, or in fact when the address is given
during netdevice creation, the entry appears:
# ip link add name br up address 00:11:22:33:44:55 type bridge
# bridge fdb show | grep 00:11:22:33:44:55
00:11:22:33:44:55 dev br vlan 1 master br permanent
00:11:22:33:44:55 dev br master br permanent
However when the bridge address is set by the user to the current bridge
address before the first port is enslaved, none of the address handlers
gets invoked, because the address is not actually changed. The address is
however marked as NET_ADDR_SET. Then when a port is enslaved, the address
is not changed, because it is NET_ADDR_SET. Thus the VLAN 0 entry is not
added, and it has not been added previously either:
# ip link add name br up type bridge
# ip -br link show dev br
br UNKNOWN 7e:f0:a8:1a:be:c2 <BROADCAST,MULTICAST,UP,LOWER_UP>
# ip link set dev br addr 7e:f0:a8:1a:be:c2
# ip link add name v up type veth
# ip link set dev v master br
# ip -br link show dev br
br UNKNOWN 7e:f0:a8:1a:be:c2 <BROADCAST,MULTICAST,UP,LOWER_UP>
# bridge fdb | grep 7e:f0:a8:1a:be:c2
7e:f0:a8:1a:be:c2 dev br vlan 1 master br permanent
Then when the bridge MAC is used as DMAC, and br_handle_frame_finish()
looks up an FDB entry with VLAN=0, it doesn't find any, and floods the
traffic instead of passing it up.
Fix this by simply adding the VLAN 0 FDB entry for the bridge itself always
on netdevice creation. This also makes the behavior consistent with how
ports are treated: ports always have an FDB entry for each member VLAN as
well as VLAN 0.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/415202b2d1b9b0899479a502bbe2ba188678f192.1758550408.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
nexthop: Various fixes
Patch #1 fixes a NPD that was recently reported by syzbot.
Patch #2 fixes an issue in the existing FIB nexthop selftest.
Patch #3 extends the selftest with test cases for the bug that was fixed
in the first patch.
====================
Link: https://patch.msgid.link/20250921150824.149157-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the following test cases for both IPv4 and IPv6:
* Can change from FDB nexthop to non-FDB nexthop and vice versa.
* Can change FDB nexthop address while in a group.
* Cannot change from FDB nexthop to non-FDB nexthop and vice versa while
in a group.
Output without "nexthop: Forbid FDB status change while nexthop is in a
group":
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal"
IPv6 fdb groups functional
--------------------------
[...]
TEST: Replace FDB nexthop to non-FDB nexthop [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop [ OK ]
TEST: Replace FDB nexthop address while in a group [ OK ]
TEST: Replace FDB nexthop to non-FDB nexthop while in a group [FAIL]
TEST: Replace non-FDB nexthop to FDB nexthop while in a group [FAIL]
[...]
IPv4 fdb groups functional
--------------------------
[...]
TEST: Replace FDB nexthop to non-FDB nexthop [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop [ OK ]
TEST: Replace FDB nexthop address while in a group [ OK ]
TEST: Replace FDB nexthop to non-FDB nexthop while in a group [FAIL]
TEST: Replace non-FDB nexthop to FDB nexthop while in a group [FAIL]
[...]
Tests passed: 36
Tests failed: 4
Tests skipped: 0
Output with "nexthop: Forbid FDB status change while nexthop is in a
group":
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal"
IPv6 fdb groups functional
--------------------------
[...]
TEST: Replace FDB nexthop to non-FDB nexthop [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop [ OK ]
TEST: Replace FDB nexthop address while in a group [ OK ]
TEST: Replace FDB nexthop to non-FDB nexthop while in a group [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop while in a group [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
TEST: Replace FDB nexthop to non-FDB nexthop [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop [ OK ]
TEST: Replace FDB nexthop address while in a group [ OK ]
TEST: Replace FDB nexthop to non-FDB nexthop while in a group [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop while in a group [ OK ]
[...]
Tests passed: 40
Tests failed: 0
Tests skipped: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250921150824.149157-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test creates non-FDB nexthops without a nexthop device which leads
to the expected failure, but for the wrong reason:
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal" -v
IPv6 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-nRsN3E nexthop add id 63 via 2001:db8:91::4
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 64 via 2001:db8:91::5
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 103 group 63/64 fdb
Error: Invalid nexthop id.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-nRsN3E nexthop add id 14 via 172.16.1.2
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 15 via 172.16.1.3
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 103 group 14/15 fdb
Error: Invalid nexthop id.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
COMMAND: ip -netns me-nRsN3E nexthop add id 16 via 172.16.1.2 fdb
COMMAND: ip -netns me-nRsN3E nexthop add id 17 via 172.16.1.3 fdb
COMMAND: ip -netns me-nRsN3E nexthop add id 104 group 14/15
Error: Invalid nexthop id.
TEST: Non-Fdb Nexthop group with fdb nexthops [ OK ]
[...]
COMMAND: ip -netns me-0dlhyd ro add 172.16.0.0/22 nhid 15
Error: Nexthop id does not exist.
TEST: Route add with fdb nexthop [ OK ]
In addition, as can be seen in the above output, a couple of IPv4 test
cases used the non-FDB nexthops (14 and 15) when they intended to use
the FDB nexthops (16 and 17). These test cases only passed because
failure was expected, but they failed for the wrong reason.
Fix the test to create the non-FDB nexthops with a nexthop device and
adjust the IPv4 test cases to use the FDB nexthops instead of the
non-FDB nexthops.
Output after the fix:
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal" -v
IPv6 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-lNzfHP nexthop add id 63 via 2001:db8:91::4 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 64 via 2001:db8:91::5 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 103 group 63/64 fdb
Error: FDB nexthop group can only have fdb nexthops.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-lNzfHP nexthop add id 14 via 172.16.1.2 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 15 via 172.16.1.3 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 103 group 14/15 fdb
Error: FDB nexthop group can only have fdb nexthops.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
COMMAND: ip -netns me-lNzfHP nexthop add id 16 via 172.16.1.2 fdb
COMMAND: ip -netns me-lNzfHP nexthop add id 17 via 172.16.1.3 fdb
COMMAND: ip -netns me-lNzfHP nexthop add id 104 group 16/17
Error: Non FDB nexthop group cannot have fdb nexthops.
TEST: Non-Fdb Nexthop group with fdb nexthops [ OK ]
[...]
COMMAND: ip -netns me-lNzfHP ro add 172.16.0.0/22 nhid 16
Error: Route cannot point to a fdb nexthop.
TEST: Route add with fdb nexthop [ OK ]
[...]
Tests passed: 30
Tests failed: 0
Tests skipped: 0
Fixes: 0534c5489c ("selftests: net: add fdb nexthop tests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250921150824.149157-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kernel forbids the creation of non-FDB nexthop groups with FDB
nexthops:
# ip nexthop add id 1 via 192.0.2.1 fdb
# ip nexthop add id 2 group 1
Error: Non FDB nexthop group cannot have fdb nexthops.
And vice versa:
# ip nexthop add id 3 via 192.0.2.2 dev dummy1
# ip nexthop add id 4 group 3 fdb
Error: FDB nexthop group can only have fdb nexthops.
However, as long as no routes are pointing to a non-FDB nexthop group,
the kernel allows changing the type of a nexthop from FDB to non-FDB and
vice versa:
# ip nexthop add id 5 via 192.0.2.2 dev dummy1
# ip nexthop add id 6 group 5
# ip nexthop replace id 5 via 192.0.2.2 fdb
# echo $?
0
This configuration is invalid and can result in a NPD [1] since FDB
nexthops are not associated with a nexthop device:
# ip route add 198.51.100.1/32 nhid 6
# ping 198.51.100.1
Fix by preventing nexthop FDB status change while the nexthop is in a
group:
# ip nexthop add id 7 via 192.0.2.2 dev dummy1
# ip nexthop add id 8 group 7
# ip nexthop replace id 7 via 192.0.2.2 fdb
Error: Cannot change nexthop FDB status while in a group.
[1]
BUG: kernel NULL pointer dereference, address: 00000000000003c0
[...]
Oops: Oops: 0000 [#1] SMP
CPU: 6 UID: 0 PID: 367 Comm: ping Not tainted 6.17.0-rc6-virtme-gb65678cacc03 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:fib_lookup_good_nhc+0x1e/0x80
[...]
Call Trace:
<TASK>
fib_table_lookup+0x541/0x650
ip_route_output_key_hash_rcu+0x2ea/0x970
ip_route_output_key_hash+0x55/0x80
__ip4_datagram_connect+0x250/0x330
udp_connect+0x2b/0x60
__sys_connect+0x9c/0xd0
__x64_sys_connect+0x18/0x20
do_syscall_64+0xa4/0x2a0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 38428d6871 ("nexthop: support for fdb ecmp nexthops")
Reported-by: syzbot+6596516dd2b635ba2350@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68c9a4d2.050a0220.3c6139.0e63.GAE@google.com/
Tested-by: syzbot+6596516dd2b635ba2350@syzkaller.appspotmail.com
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250921150824.149157-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit says:
====================
net: phy: stop exporting phy_driver_register
Once the last user of a clock in dp83640 has been removed, the clock should
be removed. So far orphaned clocks are cleaned up in dp83640_free_clocks()
only. Add the logic to remove orphaned clocks in dp83640_remove().
This allows to simplify the code, and use standard macro
module_phy_driver(). dp83640 was the last external user of
phy_driver_register(), so we can stop exporting this function afterwards.
====================
Link: https://patch.msgid.link/b86c2ecc-41f6-4f7f-85db-b7fa684d1fb7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once the last user of a clock has been removed, the clock should be
removed. So far orphaned clocks are cleaned up in dp83640_free_clocks()
only. Add the logic to remove orphaned clocks in dp83640_remove().
This allows to simplify the code, and use standard macro
module_phy_driver(). dp83640 was the last external user of
phy_driver_register(), so we can stop exporting this function afterwards.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/6d4e80e7-c684-4d95-abbd-ea62b79a9a8a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Config symbol MDIO_BUS isn't used in drivers/net/mdio. It's only used
in drivers/net/phy. So move it there.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/164ff1c6-2cf9-4e30-80fb-da4cc7165dc8@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rtnetlink FOU selftest prints an incorrect string:
"FAIL: fou"s. Change it to the intended "FAIL: fou" by
removing a stray character in the end_test string of the test.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250921192111.1567498-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the corresponding
structure. Notice that `struct airoha_foe_entry` is a flexible
structure, this is a structure that contains a flexible-array
member.
Fix the following warning:
drivers/net/ethernet/airoha/airoha_eth.h:474:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/aNFYVYLXQDqm4yxb@kspp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, alloc_skb_with_frags() will only fill (MAX_SKB_FRAGS - 1)
slots. I think it should use all MAX_SKB_FRAGS slots, as callers of
alloc_skb_with_frags() will size their allocation of frags based
on MAX_SKB_FRAGS.
This issue was discovered via a test patch that sets 'order' to 0
in alloc_skb_with_frags(), which effectively tests/simulates high
fragmentation. In this case sendmsg() on unix sockets will fail every
time for large allocations. If the PAGE_SIZE is 4K, then data_len will
request 68K or 17 pages, but alloc_skb_with_frags() can only allocate
64K in this case or 16 pages.
Fixes: 09c2c90705 ("net: allow alloc_skb_with_frags() to allocate bigger packets")
Signed-off-by: Jason Baron <jbaron@akamai.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250922191957.2855612-1-jbaron@akamai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmjSTPsTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnDOfB/4id/Fio0JP6Uw0otlL8E/QlRh6L92N
tkdkrOtDO/cvxqBviiCHQjvjfqmTn/PMglpfRxfwBO7FHhrXBXiWB889/ojqvRGP
+KT0v/+z/sGsXmHjXvvax9QHbO7lH2E9GUtObaUYtDjI8ID3hnCIYJ5m33yclLJP
araLAhVQaVuwqgE8THkntKkHn3K8I/jDGaJyA+erPL4S725hcZv5bAY3p7plS1jc
tuvdXNmumc31KVK2l04zHG5iTxSh8Qzx6n0yrYyfJ7kp2iwl+ahuIRvst8ZeOPl4
4ic6rMTIR1ylvy+e+CRIdSI/hkgT8JC3G3cHwl1bzSAXnwOUV43TXMBF
=czyt
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.17-20250923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-09-23
The 1st patch is by Chen Yufeng and fixes a potential NULL pointer
deref in the hi311x driver.
Duy Nguyen contributes a patch for the rcar_canfd driver to fix the
controller mode setting.
The next 4 patches are by Vincent Mailhol and populate the
ndo_change_mtu(( callback in the etas_es58x, hi311x, sun4i_can and
mcba_usb driver to prevent buffer overflows.
Stéphane Grosjean's patch for the peak_usb driver fixes a
shift-out-of-bounds issue.
* tag 'linux-can-fixes-for-6.17-20250923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: peak_usb: fix shift-out-of-bounds issue
can: mcba_usb: populate ndo_change_mtu() to prevent buffer overflow
can: sun4i_can: populate ndo_change_mtu() to prevent buffer overflow
can: hi311x: populate ndo_change_mtu() to prevent buffer overflow
can: etas_es58x: populate ndo_change_mtu() to prevent buffer overflow
can: rcar_canfd: Fix controller mode setting
can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled
====================
Link: https://patch.msgid.link/20250923073427.493034-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
busylock was protecting UDP sockets against packet floods,
but unfortunately was not protecting the host itself.
Under stress, many cpus could spin while acquiring the busylock,
and NIC had to drop packets. Or packets would be dropped
in cpu backlog if RPS/RFS were in place.
This patch replaces the busylock by intermediate
lockless queues. (One queue per NUMA node).
This means that fewer number of cpus have to acquire
the UDP receive queue lock.
Most of the cpus can either:
- immediately drop the packet.
- or queue it in their NUMA aware lockless queue.
Then one of the cpu is chosen to process this lockless queue
in a batch.
The batch only contains packets that were cooked on the same
NUMA node, thus with very limited latency impact.
Tested:
DDOS targeting a victim UDP socket, on a platform with 6 NUMA nodes
(Intel(R) Xeon(R) 6985P-C)
Before:
nstat -n ; sleep 1 ; nstat | grep Udp
Udp6InDatagrams 1004179 0.0
Udp6InErrors 3117 0.0
Udp6RcvbufErrors 3117 0.0
After:
nstat -n ; sleep 1 ; nstat | grep Udp
Udp6InDatagrams 1116633 0.0
Udp6InErrors 14197275 0.0
Udp6RcvbufErrors 14197275 0.0
We can see this host can now proces 14.2 M more packets per second
while under attack, and the victim socket can receive 11 % more
packets.
I used a small bpftrace program measuring time (in us) spent in
__udp_enqueue_schedule_skb().
Before:
@udp_enqueue_us[398]:
[0] 24901 |@@@ |
[1] 63512 |@@@@@@@@@ |
[2, 4) 344827 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[4, 8) 244673 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[8, 16) 54022 |@@@@@@@@ |
[16, 32) 222134 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[32, 64) 232042 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[64, 128) 4219 | |
[128, 256) 188 | |
After:
@udp_enqueue_us[398]:
[0] 5608855 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[1] 1111277 |@@@@@@@@@@ |
[2, 4) 501439 |@@@@ |
[4, 8) 102921 | |
[8, 16) 29895 | |
[16, 32) 43500 | |
[32, 64) 31552 | |
[64, 128) 979 | |
[128, 256) 13 | |
Note that the remaining bottleneck for this platform is in
udp_drops_inc() because we limited struct numa_drop_counters
to only two nodes so far.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250922104240.2182559-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
