Add the ACR register to all PLL settings and provide the correct
ACR value for each PLL used in different SoCs.
Suggested-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
[nicolas.ferre@microchip.com: add sama7d65 and review commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
A potential divider for the master clock is div/3. The register
configuration for div/3 is MASTER_PRES_MAX. The current bit shifting
method does not work for this case. Checking for MASTER_PRES_MAX will
ensure the correct decimal value is stored in the system.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
This register is important for sequencing the commands to PLLs, so
actually write the update bits with regmap_write_bits() instead of
relying on a read/modify/write regmap command that could skip the actual
hardware write if the value is identical to the one read.
It's changed when modification is needed to the PLL, when
read-only operation is done, we could keep the call to
regmap_update_bits().
Add a comment to the sam9x60_div_pll_set_div() function that uses this
PLL_UPDT register so that it's used consistently, according to the
product's datasheet.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Ryan Wanner <ryan.wanner@microchip.com> # on sama7d65 and sam9x75
Link: https://lore.kernel.org/r/20250827150811.82496-1-nicolas.ferre@microchip.com
[claudiu.beznea: fix "Alignment should match open parenthesis"
checkpatch.pl check]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add a new word in assembly to store ACR value during the calls
to at91_plla_disable/at91_plla_enable macros and use it.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[cristian.birsan@microchip.com: remove ACR_DEFAULT_PLLA loading]
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Link: https://lore.kernel.org/r/20250827145427.46819-4-nicolas.ferre@microchip.com
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
It is "preferred_mem_loc" instead of "atomic" for the ATTR_PREFERRED_LOC
path.
Also include 2 minor changes with no functional impact.
1. Remove the redundant "attr.atomic_access" assignment.
2. Replace down_read_interruptible() with
xe_svm_notifier_lock_interruptible() to pair with
xe_svm_notifier_unlock().
Fixes: ada7486c56 ("drm/xe: Implement madvise ioctl for xe")
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250911173139.1405878-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
These changes should have no functional impact.
1. Correct typo of "operation"in macro range_debug().
2. Combine 2 spin_lock() call in xe_svm_garbage_collector() into 1.
3. Drop redundant preferred_region_is_vram check in
xe_svm_range_needs_migrate_to_vram().
4. Combine the devmem_possible check in xe_svm_handle_pagefault().
need_vram includes the IS_DGFX() check, so there is no change for
.devmem_only.
v2: revert !ctx.devmem_only change (Matt)
v3: rebase code and refine commit message.
v4: rebase code and refine commit message.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250911031405.1371812-2-shuicheng.lin@intel.com
The presence of FEAT_GCIE_LEGACY is now handled as a CPU
feature. Therefore, drop the check and flag from the GIC driver and
gic_kvm_info as it is no longer required or used by KVM.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The previous implementation of the probing function had the flaw that
it wouldn't catch mismatched CPU features. Specifically, GICv5 legacy
support (support for GICv3 VMs on a GICv5 host) was being enabled as
long as the initial boot CPU had support for the feature. This allowed
the support to become enabled on mismatched configurations.
Move to using cpus_have_final_cap(ARM64_HAS_GICV5_LEGACY) instead,
which only returns true when all booted CPUs support
FEAT_GCIE_LEGACY. A byproduct of this is that it ensures that late
onlining of CPUs is blocked on feature mismatch.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Implement the GCIE_LEGACY capability as a system feature to be able to
check for support from KVM. The type is explicitly
ARM64_CPUCAP_EARLY_LOCAL_CPU_FEATURE, which means that the capability
is enabled early if all boot CPUs support it. Additionally, if this
capability is enabled during boot, it prevents late onlining of CPUs
that lack it, thereby avoiding potential mismatched configurations
which would break KVM.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Extend the NV check to pass for a GICv5 host that has
FEAT_GCIE_LEGACY. The has_gcie_v3_compat flag is only set on GICv5
hosts (that explicitly support FEAT_GCIE_LEGACY), and hence the
explicit check for a VGIC_V5 is omitted.
As of this change, vGICv3-based VMs can run with nested on a
compatible GICv5 host.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
We currently access ICC_SRE_EL2 at each load/put on VHE, and on each
entry/exit on nVHE. Both are quite onerous on NV, as this register
always traps.
We do this to make sure the EL1 guest doesn't flip between v2 and v3
behind our back. But all modern implementations have dropped v2,
and this is just overhead.
At the same time, the GICv5 spec has been fixed to allow access to
ICC_SRE_EL2 in legacy mode. Use this opportunity to replace the
GICv5 checks for v2 compat checks, with an ad-hoc static key.
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The user_mem_abort() function acquires a page reference via
__kvm_faultin_pfn() early in its execution. However, the subsequent
checks for mismatched attributes between stage 1 and stage 2 mappings
would return an error code directly, bypassing the corresponding page
release.
Fix this by storing the error and releasing the unused page before
returning the error.
Fixes: 6d674e28f6 ("KVM: arm/arm64: Properly handle faulting of device mappings")
Fixes: 2a8dfab266 ("KVM: arm64: Block cacheable PFNMAP mapping")
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
* kvm-arm64/dump-instr:
: .
: Dump the isntruction stream on panic, just like the rest of the kernel
: already does.
:
: Patches courtesy of Mostafa Saleh (20250909133631.3844423-1-smostafa@google.com)
: .
KVM: arm64: Map hyp text as RO and dump instr on panic
KVM: arm64: Dump instruction on hyp panic
Signed-off-by: Marc Zyngier <maz@kernel.org>
Currently, TRAILING_OVERLAP() token-pastes the FAM parameter into the
name of internal pdding member `__offset_to_##FAM`. This forces FAM to
be a single identifier, which prevents callers from using a FAM when
it's a nested member. For instance, see the following scenario:
| struct flex {
| size_t count;
| int data[];
| };
| struct foo {
| int hdr_foo;
| struct flex f;
| };
| struct composite {
| struct foo hdr;
| int data[100];
| };
In this case, it'd be useful if TRAILING_OVERLAP() could be used in
the following way:
| struct composite {
| TRAILING_OVERLAP(struct foo, hdr, f.data,
| int data[100];
| );
| };
However, this is not current possible due to the token concatenation
in `__offset_to_##FAM`, which fails when FAM contains a dot.
So, remove token-pasting and use the fixed internal name
`__offset_to_FAM` and, with this, expand the capabilities of
TRAILING_OVERLAP(). :)
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/13b3e0a69aad837b4e32ca8269b9d91bf1fbe9ef.1758115257.git.gustavoars@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Since the PXP start comes after __xe_exec_queue_init() has completed,
we need to cleanup what was done in that function in case of a PXP
start error.
__xe_exec_queue_init calls the submission backend init() function,
so we need to introduce an opposite for that. Unfortunately, while
we already have a fini() function pointer, it performs other
operations in addition to cleaning up what was done by the init().
Therefore, for clarity, the existing fini() has been renamed to
destroy(), while a new fini() has been added to only clean up what was
done by the init(), with the latter being called by the former (via
xe_exec_queue_fini).
Fixes: 72d479601d ("drm/xe/pxp/uapi: Add userspace and LRC support for PXP-using queues")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250909221240.3711023-3-daniele.ceraolospurio@intel.com
(cherry picked from commit 626667321d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On partial failure, some sysfs files created before the failure might
not be removed. Add common cleanup step to remove them all immediately,
as is should be harmless to attempt to remove non-existing files.
Fixes: 0e414bf7ad ("drm/xe: Expose PCIe link downgrade attributes")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Zongyao Bai <zongyao.bai@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250915214716.1327379-2-zongyao.bai@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 1a869168d9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Nobody really cares about BE, but KVM currently only deals with
SCTLR_EL1 when evaluating or setting the endianness in PSCI,
meaning that we evaluate whatever the L2 state has been at some point.
Teach these primitives about SCTLR_EL2, and forget about BE...
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Check in snd_intel_dsp_check_soundwire() that the pointer returned by
ACPI_HANDLE() is not NULL, before passing it on to other functions.
The original code assumed a non-NULL return, but if it was unexpectedly
NULL it would end up passed to acpi_walk_namespace() as the start
point, and would result in
[ 3.219028] BUG: kernel NULL pointer dereference, address:
0000000000000018
[ 3.219029] #PF: supervisor read access in kernel mode
[ 3.219030] #PF: error_code(0x0000) - not-present page
[ 3.219031] PGD 0 P4D 0
[ 3.219032] Oops: Oops: 0000 [#1] SMP NOPTI
[ 3.219035] CPU: 2 UID: 0 PID: 476 Comm: (udev-worker) Tainted: G S
AW E 6.17.0-rc5-test #1 PREEMPT(voluntary)
[ 3.219038] Tainted: [S]=CPU_OUT_OF_SPEC, [A]=OVERRIDDEN_ACPI_TABLE,
[W]=WARN, [E]=UNSIGNED_MODULE
[ 3.219040] RIP: 0010:acpi_ns_walk_namespace+0xb5/0x480
This problem was triggered by a bugged DSDT that the kernel couldn't parse.
But it shouldn't be possible to SEGFAULT the kernel just because of some
bugs in ACPI.
Fixes: 0650857570 ("ALSA: hda: add autodetection for SoundWire")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When we get wrong extent info data, and look up extent_node in rb tree,
it will cause infinite loop (CONFIG_F2FS_CHECK_FS=n). Avoiding this by
return NULL and print some kernel messages in that case.
Signed-off-by: wangzijie <wangzijie1@honor.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add a single sysfs read-only interface for reading PCI device serial
numbers from userspace in a programmatic way. This device attribute uses
the same hexadecimal 1-byte dashed formatting as lspci serial number
capability output. If a device doesn't support the serial number
capability, the serial_number sysfs attribute will not be visible.
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mario Limonciello <superm1@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://patch.msgid.link/20250917125815.722952-2-thepacketgeek@gmail.com
Add a cached copy of the hardware port-id list that is available at init
before all @dport objects have been instantiated. Change is in preparation
of delayed dport instantiation.
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Refactor the code in reap_dports() out to provide a helper function that
reaps a single dport. This will be used later in the cleanup path for
allocating a dport. Renaming to del_port() and del_dports() to mirror
devm_cxl_add_dport().
[dj] Fixed up subject per Robert
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add a helper to replace the open code detection of CXL device hierarchy
root, or the host bridge. The helper will be used for delayed downstream
port (dport) creation.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Tested-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add node to support the second UART node controller in IPQ5018.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20250917-ipq5018-uart2-v1-1-f8680bbf947f@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Flatten usb controller nodes and update to using latest bindings and
flattened driver approach. Enumeration of ADB has been tested on EVK
Platform.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250917123827.671966-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
basic-gcs has it's own make rule to handle the special compiler
invocation to build against nolibc. This rule does not respect the
$(CFLAGS) passed by the Makefile from the parent directory.
However these $(CFLAGS) set up the include path to include the UAPI
headers from the current kernel.
Due to this the asm/hwcap.h header is used from the toolchain instead of
the UAPI and the definition of HWCAP_GCS is not found.
Restructure the rule for basic-gcs to respect the $(CFLAGS).
Also drop those options which are already provided by $(CFLAGS).
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/lkml/CA+G9fYv77X+kKz2YT6xw7=9UrrotTbQ6fgNac7oohOg8BgGvtw@mail.gmail.com/
Fixes: a985fe6383 ("kselftest/arm64/gcs: Use nolibc's getauxval()")
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Use struct_size() to determine the memory needed for a new 'struct
descriptor_resource' and flex_array_size() to calculate the number of
bytes to copy from userspace. This removes the hardcoded size (4 bytes)
for the 'u32 data[]' entries.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250916122143.2459993-3-thorsten.blum@linux.dev
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
- limit tag size in dm-integrity to 255 bytes
- fix 'alignment inconsistency' warning in dm-raid
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRnH8MwLyZDhyYfesYTAyx9YGnhbQUCaMrAdRQcbXBhdG9ja2FA
cmVkaGF0LmNvbQAKCRATAyx9YGnhbYhtAQDsWJHG7dOVuvoY+kyM9SmC2My6l5u2
awYBsjVT//9KDAD/c6s+ffeseY6VpBuFmPx5i75ieCmUcuKTMUxgdIErPwM=
=FXwZ
-----END PGP SIGNATURE-----
Merge tag 'for-6.17/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- fix integer overflow in dm-stripe
- limit tag size in dm-integrity to 255 bytes
- fix 'alignment inconsistency' warning in dm-raid
* tag 'for-6.17/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-raid: don't set io_min and io_opt for raid1
dm-integrity: limit MAX_TAG_SIZE to 255
dm-stripe: fix a possible integer overflow
-----BEGIN PGP SIGNATURE-----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=0aOx
-----END PGP SIGNATURE-----
Merge tag 'for-6.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- in zoned mode, turn assertion to proper code when reserving space in
relocation block group
- fix search key of extended ref (hardlink) when replaying log
- fix initialization of file extent tree on filesystems without
no-holes feature
- add harmless data race annotation to block group comparator
* tag 'for-6.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: annotate block group access with data_race() when sorting for reclaim
btrfs: initialize inode::file_extent_tree after i_mode has been set
btrfs: zoned: fix incorrect ASSERT in btrfs_zoned_reserve_data_reloc_bg()
btrfs: fix invalid extref key setup when replaying dentry
These compile on x86_64 with =y and =m.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
appended to the "under-the-cut" portion of the patch.
Note that prior to running the Coccinelle,
airoha_cpu_pmdomain_clk_round() was renamed to
airoha_cpu_pmdomain_clk_round_rate().
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
softirqs are preemptible on PREEMPT_RT. There is synchronisation between
individual sections which disable bottom halves. This in turn means that
a forced threaded interrupt cannot preempt another forced threaded
interrupt. Instead it will PI-boost the other handler and wait for its
completion.
This is required because code within a softirq section is assumed to be
non-preemptible and may expect exclusive access to per-CPU resources
such as variables or pinned timers.
Code with such expectation has been identified and updated to use
local_lock_nested_bh() for locking of the per-CPU resource. This means the
softirq lock can be removed.
Disable the softirq synchronization, but add a new config switch
CONFIG_PREEMPT_RT_NEEDS_BH_LOCK which allows to re-enable the synchronized
behavior in case that there are issues, which haven't been detected yet.
The softirq_ctrl.cnt accounting remains to let the NOHZ code know if
softirqs are currently handled.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The tasklet_unlock_spin_wait() via tasklet_disable_in_atomic() is
provided for a few legacy tasklet users. The interface is used from
atomic context (which is either softirq or disabled preemption) on
non-PREEMPT_RT and relies on spinning until the tasklet callback
completes.
On PREEMPT_RT the context is never atomic but the busy polling logic
remains. It is possible that the thread invoking tasklet_unlock_spin_wait()
has higher priority than the tasklet. If both run on the same CPU the the
tasklet makes no progress and the thread trying to cancel the tasklet will
live-lock the system.
To avoid the lockup tasklet_unlock_spin_wait() uses local_bh_disable()/
enable() which utilizes the local_lock_t for synchronisation. This lock is
a central per-CPU BKL and about to be removed.
Solve this by acquire a lock in tasklet_action_common() which is held while
the tasklet's callback is invoked. This lock will be acquired from
tasklet_unlock_spin_wait() via tasklet_callback_cancel_wait_running().
After the tasklet completed tasklet_callback_sync_wait_running() drops the
lock and acquires it again. In order to avoid unlocking the lock even if
there is no cancel request, there is a cb_waiters counter which is
incremented during a cancel request. Blocking on the lock will PI-boost
the tasklet if needed, ensuring progress is made.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The parameter max_hw_wzeroes_unmap_sectors in queue_limits should be
equal to max_write_zeroes_sectors if it is set to a non-zero value.
However, when the backend bdev is specified, this parameter is
initialized to UINT_MAX during the call to blk_set_stacking_limits(),
while only max_write_zeroes_sectors is adjusted. Therefore, this
discrepancy triggers a value check failure in blk_validate_limits().
Since the drvd driver doesn't yet support unmap write zeroes, so fix
this failure by explicitly setting max_hw_wzeroes_unmap_sectors to
zero.
Fixes: 0c40d7cb5e ("block: introduce max_{hw|user}_wzeroes_unmap_sectors to queue limits")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds tests covering the various paddings in ctx structures.
In case of sk_lookup BPF programs, the behavior is a bit different
because accesses to the padding are explicitly allowed. Other cases
result in a clear reject from the verifier.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/3dc5f025e350aeb2bb1c257b87c577518e574aeb.1758094761.git.paul.chaignon@gmail.com
Move the sizeof_field and offsetofend macros from individual test files
to the common bpf_misc.h to avoid duplication.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/97a3f3788bd3aec309100bc073a5c77130e371fd.1758094761.git.paul.chaignon@gmail.com
Syzkaller found a kernel warning on the following sock_addr program:
0: r0 = 0
1: r2 = *(u32 *)(r1 +60)
2: exit
which triggers:
verifier bug: error during ctx access conversion (0)
This is happening because offset 60 in bpf_sock_addr corresponds to an
implicit padding of 4 bytes, right after msg_src_ip4. Access to this
padding isn't rejected in sock_addr_is_valid_access and it thus later
fails to convert the access.
This patch fixes it by explicitly checking the various fields of
bpf_sock_addr in sock_addr_is_valid_access.
I checked the other ctx structures and is_valid_access functions and
didn't find any other similar cases. Other cases of (properly handled)
padding are covered in new tests in a subsequent patch.
Fixes: 1cedee13d2 ("bpf: Hooks for sys_sendmsg")
Reported-by: syzbot+136ca59d411f92e821b7@syzkaller.appspotmail.com
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=136ca59d411f92e821b7
Link: https://lore.kernel.org/bpf/b58609d9490649e76e584b0361da0abd3c2c1779.1758094761.git.paul.chaignon@gmail.com
Marvell's PXA1908 SoC has a few power domains for its VPU, GPU, image
processor and DSI PHY. Add a driver to control these.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the immutable branch dt into next, to allow the DT bindings to be
tested together with changes that are targeted for v6.18.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add required syscon compatible and #power-domain-cells to the APMU
controller. This is required for the SoC's power domain controller as
the registers are shared.
Device tree bindings for said power domains are also added.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
These commands
modprobe brd rd_size=1048576
vgcreate vg /dev/ram*
lvcreate -m4 -L10 -n lv vg
trigger the following warnings:
device-mapper: table: 252:10: adding target device (start sect 0 len 24576) caused an alignment inconsistency
device-mapper: table: 252:10: adding target device (start sect 0 len 24576) caused an alignment inconsistency
The warnings are caused by the fact that io_min is 512 and physical block
size is 4096.
If there's chunk-less raid, such as raid1, io_min shouldn't be set to zero
because it would be raised to 512 and it would trigger the warning.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable@vger.kernel.org
Tightening the throttle activation check in blk_throtl_activated() to
require both q->td presence and policy bit set introduced a memory leak
during disk release:
blkg_destroy_all() clears the policy bit first during queue deactivation,
causing subsequent blk_throtl_exit() to skip throtl_data cleanup when
blk_throtl_activated() fails policy check.
Idealy we should avoid modifying blk_throtl_exit() activation check because
it's intuitive that blk-throtl start from blk_throtl_init() and end in
blk_throtl_exit(). However, call blk_throtl_exit() before
blkg_destroy_all() will make a long term deadlock problem easier to
trigger[1], hence fix this problem by checking if q->td is NULL from
blk_throtl_exit(), and remove policy deactivation as well since it's
useless.
[1] https://lore.kernel.org/all/CAHj4cs9p9H5yx+ywsb3CMUdbqGPhM+8tuBvhW=9ADiCjAqza9w@mail.gmail.com/#t
Fixes: bd9fd5be6b ("blk-throttle: fix access race during throttle policy activation")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs-p-ZwBEKigBj7T6hQCOo-H68-kVwCrV6ZvRovrr9Z+HA@mail.gmail.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 2dd6532e95 ("blk-mq: Drop 'reserved' arg of busy_tag_iter_fn")
removed the 'reserved' argument from tag iteration callback functions.
Bring the blk_mq_tagset_busy_iter() documentation in sync with that
change.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
