When a SYN containing the 'C' flag (deny join id0) was received, this
piece of information was not propagated to the path-manager.
Even if this flag is mainly set on the server side, a client can also
tell the server it cannot try to establish new subflows to the client's
initial IP address and port. The server's PM should then record such
info when received, and before sending events about the new connection.
Fixes: df377be387 ("mptcp: add deny_join_id0 in mptcp_options_received")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-1-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dead since 2005, time to bury the body...
Reviewed-by: Michal Simek <michal.simek@amd.com> # microblaze
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add DFLL support on Tegra114. This is quite similar to the existing
Tegra124 support and most of the code can be reused, except for the
CVB frequency tables.
-----BEGIN PGP SIGNATURE-----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=Tlrh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PzHP
-----END PGP SIGNATURE-----
Merge tag 'for-6.18-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-tegra
Pull Tegra clk driver updates from Thierry Reding:
- Add DFLL support on Tegra114
This is quite similar to the existing Tegra124 support and most
of the code can be reused, except for the CVB frequency tables.
* tag 'for-6.18-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
clk: tegra: dfll: Add CVB tables for Tegra114
clk: tegra: Add DFLL DVCO reset control for Tegra114
dt-bindings: arm: tegra: Add ASUS TF101G and SL101
dt-bindings: reset: Add Tegra114 CAR header
dt-bindings: arm: tegra: Add Xiaomi Mi Pad (A0101)
dt-bindings: clock: tegra30: Add IDs for CSI pad clocks
dt-bindings: display: tegra: Move avdd-dsi-csi-supply from VI to CSI
dt-bindings: i2c: nvidia,tegra20-i2c: Document Tegra264 I2C
Matthieu Baerts says:
====================
selftests: mptcp: avoid spurious errors on TCP disconnect
This series should fix the recent instabilities seen by MPTCP and NIPA
CIs where the 'mptcp_connect.sh' tests fail regularly when running the
'disconnect' subtests with "plain" TCP sockets, e.g.
# INFO: disconnect
# 63 ns1 MPTCP -> ns1 (10.0.1.1:20001 ) MPTCP (duration 996ms) [ OK ]
# 64 ns1 MPTCP -> ns1 (10.0.1.1:20002 ) TCP (duration 851ms) [ OK ]
# 65 ns1 TCP -> ns1 (10.0.1.1:20003 ) MPTCP Unexpected revents: POLLERR/POLLNVAL(19)
# (duration 896ms) [FAIL] file received by server does not match (in, out):
# -rw-r--r-- 1 root root 11112852 Aug 19 09:16 /tmp/tmp.hlJe5DoMoq.disconnect
# Trailing bytes are:
# /{ga 6@=#.8:-rw------- 1 root root 10085368 Aug 19 09:16 /tmp/tmp.blClunilxx
# Trailing bytes are:
# /{ga 6@=#.8:66 ns1 MPTCP -> ns1 (dead:beef:1::1:20004) MPTCP (duration 987ms) [ OK ]
# 67 ns1 MPTCP -> ns1 (dead:beef:1::1:20005) TCP (duration 911ms) [ OK ]
# 68 ns1 TCP -> ns1 (dead:beef:1::1:20006) MPTCP (duration 980ms) [ OK ]
# [FAIL] Tests of the full disconnection have failed
These issues started to be visible after some behavioural changes in
TCP, where too quick re-connections after a shutdown() can now be more
easily rejected. Patch 3 modifies the selftests to wait, but this
resolution revealed an issue in MPTCP which is fixed by patch 1 (a fix
for v5.9 kernel).
Patches 2 and 4 improve some errors reported by the selftests, and patch
5 helps with the debugging of such issues.
====================
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-0-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To be able to find which capture files have been produced after several
runs.
This prefix was not printed anywhere before.
While at it, always use the same prefix by taking info from ns1, instead
of "$connector_ns", which is sometimes ns1, sometimes ns2 in the
subtests.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-5-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is better than printing random bytes in the terminal.
Note that Jakub suggested 'hexdump', but Mat found out this tool is not
often installed by default. 'od' can do a similar job, and it is in the
POSIX specs and available in coreutils, so it should be on more systems.
While at it, display a few more bytes, just to fill in the two lines.
And no need to display the 3rd only line showing the next number of
bytes: 0000040.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-4-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The disconnect test-case, with 'plain' TCP sockets generates spurious
errors, e.g.
07 ns1 TCP -> ns1 (dead:beef:1::1:10006) MPTCP
read: Connection reset by peer
read: Connection reset by peer
(duration 155ms) [FAIL] client exit code 3, server 3
netns ns1-FloSdv (listener) socket stat for 10006:
TcpActiveOpens 2 0.0
TcpPassiveOpens 2 0.0
TcpEstabResets 2 0.0
TcpInSegs 274 0.0
TcpOutSegs 276 0.0
TcpOutRsts 3 0.0
TcpExtPruneCalled 2 0.0
TcpExtRcvPruned 1 0.0
TcpExtTCPPureAcks 104 0.0
TcpExtTCPRcvCollapsed 2 0.0
TcpExtTCPBacklogCoalesce 42 0.0
TcpExtTCPRcvCoalesce 43 0.0
TcpExtTCPChallengeACK 1 0.0
TcpExtTCPFromZeroWindowAdv 42 0.0
TcpExtTCPToZeroWindowAdv 41 0.0
TcpExtTCPWantZeroWindowAdv 13 0.0
TcpExtTCPOrigDataSent 164 0.0
TcpExtTCPDelivered 165 0.0
TcpExtTCPRcvQDrop 1 0.0
In the failing scenarios (TCP -> MPTCP), the involved sockets are
actually plain TCP ones, as fallbacks for passive sockets at 2WHS time
cause the MPTCP listeners to actually create 'plain' TCP sockets.
Similar to commit 218cc16632 ("selftests: mptcp: avoid spurious errors
on disconnect"), the root cause is in the user-space bits: the test
program tries to disconnect as soon as all the pending data has been
spooled, generating an RST. If such option reaches the peer before the
connection has reached the closed status, the TCP socket will report an
error to the user-space, as per protocol specification, causing the
above failure. Note that it looks like this issue got more visible since
the "tcp: receiver changes" series from commit 06baf9bfa6 ("Merge
branch 'tcp-receiver-changes'").
Address the issue by explicitly waiting for the TCP sockets (-t) to
reach a closed status before performing the disconnect. More precisely,
the test program now waits for plain TCP sockets or TCP subflows in
addition to the MPTCP sockets that were already monitored.
While at it, use 'ss' with '-n' to avoid resolving service names, which
is not needed here.
Fixes: 218cc16632 ("selftests: mptcp: avoid spurious errors on disconnect")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-3-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IO errors were correctly printed to stderr, and propagated up to the
main loop for the server side, but the returned value was ignored. As a
consequence, the program for the listener side was no longer exiting
with an error code in case of IO issues.
Because of that, some issues might not have been seen. But very likely,
most issues either had an effect on the client side, or the file
transfer was not the expected one, e.g. the connection got reset before
the end. Still, it is better to fix this.
The main consequence of this issue is the error that was reported by the
selftests: the received and sent files were different, and the MIB
counters were not printed. Also, when such errors happened during the
'disconnect' tests, the program tried to continue until the timeout.
Now when an IO error is detected, the program exits directly with an
error.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-2-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the MPTCP DATA FIN have been ACKed, there is no more MPTCP related
metadata to exchange, and all subflows can be safely shutdown.
Before this patch, the subflows were actually terminated at 'close()'
time. That's certainly fine most of the time, but not when the userspace
'shutdown()' a connection, without close()ing it. When doing so, the
subflows were staying in LAST_ACK state on one side -- and consequently
in FIN_WAIT2 on the other side -- until the 'close()' of the MPTCP
socket.
Now, when the DATA FIN have been ACKed, all subflows are shutdown. A
consequence of this is that the TCP 'FIN' flag can be set earlier now,
but the end result is the same. This affects the packetdrill tests
looking at the end of the MPTCP connections, but for a good reason.
Note that tcp_shutdown() will check the subflow state, so no need to do
that again before calling it.
Fixes: 3721b9b646 ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Cc: stable@vger.kernel.org
Fixes: 16a9a9da17 ("mptcp: Add helper to process acks of DATA_FIN")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-1-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Turn d_name into an anon union of const struct qstr d_name with
struct qstr __d_name. Very few places need to modify it (all
in fs/dcache.c); those are switched to use of ->__d_name.
Note that ->d_name can actually change under you unless you have
the right locking environment; this const just prohibits accidentally
doing stores without being easily spotted.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Nothing outside of fs/dcache.c has any business modifying
dentry names; passing &dentry->d_name as an argument should
have that argument declared as a const pointer.
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Nothing outside of fs/dcache.c has any business modifying
dentry names; passing &dentry->d_name as an argument should
have that argument declared as a const pointer.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Nothing outside of fs/dcache.c has any business modifying
dentry names; passing &dentry->d_name as an argument should
have that argument declared as a const pointer.
Acked-by: Casey Schaufler <casey@schaufler-ca.com> # smack part
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
After commit 5c3bf6cba7 ("bonding: assign random address if device
address is same as bond"), bonding will erroneously randomize the MAC
address of the first interface added to the bond if fail_over_mac =
follow.
Correct this by additionally testing for the bond being empty before
randomizing the MAC.
Fixes: 5c3bf6cba7 ("bonding: assign random address if device address is same as bond")
Reported-by: Qiuling Ren <qren@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250910024336.400253-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lad Prabhakar says:
====================
Add PCS support for Renesas RZ/{T2H,N2H} SoCs
This series aims to add PCS support for the Renesas RZ/T2H and RZ/N2H SoCs
These SoCs include a MII converter (MIIC) that converts MII to RMII/RGMII
or can be set in pass-through mode for MII similar to the RZ/N1 SoC. The
MIIC is used in conjunction with the Ethernet switch (ETHSW) available on
these SoCs.
====================
Link: https://patch.msgid.link/20250910204132.319975-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for the Renesas RZ/T2H MIIC by defining SoC-specific
modctrl match tables, register map, and string representations
for converters and ports.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250910204132.319975-10-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make MIIC accessory register unlock/lock behaviour selectable via SoC/OF
data. Add init_unlock_lock_regs and miic_write to struct miic_of_data so
the driver can either perform the traditional global unlock sequence (as
used on RZ/N1) or use a different policy for other SoCs (for example
RZ/T2H, which does not require leaving registers unlocked).
miic_reg_writel() now calls the per-SoC miic_write callback to perform
register writes. Provide miic_reg_writel_unlocked() as the default writer
and set it for the RZ/N1 OF data so existing platforms keep the same
behaviour. Add a miic_unlock_regs() helper that implements the accessory
register unlock sequence so the unlock/lock sequence can be reused where
needed (for example when a SoC requires explicit unlock/lock around
individual accesses).
This change is preparatory work for supporting RZ/T2H.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250910204132.319975-9-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add reset-line handling to the RZN1 MIIC driver and move reset
configuration into the SoC/OF data. Introduce MIIC_MAX_NUM_RSTS (= 2),
add storage for reset_control_bulk_data in struct miic and add
reset_ids and reset_count fields to miic_of_data.
When reset_ids are present in the OF data, the driver obtains the reset
lines with devm_reset_control_bulk_get_exclusive(), deasserts them during
probe and registers a devres action to assert them on remove or on error.
This change is preparatory work to support the RZ/T2H SoC, which exposes
two reset lines for the ETHSS IP. The driver remains backward compatible
for platforms that do not provide reset lines.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250910204132.319975-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the hardcoded switch mode mask definition into the SoC-specific
miic_of_data structure. This allows each SoC to define its own mask
value rather than relying on a single fixed constant. For RZ/N1 the
mask remains GENMASK(4, 0).
This is in preparation for adding support for RZ/T2H, where the
switch mode mask is GENMASK(2, 0).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250910204132.319975-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define per-SoC miic_port_start and miic_port_max fields in struct
miic_of_data and use them to validate the device-tree "reg" port number
and to compute the driver's internal zero-based port index as
(port - miic_port_start). Replace uses of the hard-coded MIIC_MAX_NR_PORTS
with the SoC-provided miic_port_max when iterating over ports.
On RZ/N1 the MIIC ports are numbered 1..5, whereas RZ/T2H numbers its MIIC
ports 0..3. By making the port base and range part of the OF data the
driver no longer assumes a fixed numbering scheme and can support SoCs that
enumerate ports from either zero or one and that expose different numbers
of ports.
This change is preparatory work for adding RZ/T2H support.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250910204132.319975-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move configuration data such as the modctrl matching table, converter
count, and string lookup tables into the SoC-specific miic_of_data
structure. Update the helper functions to use the per-SoC configuration
instead of relying on fixed-size arrays or global tables, and allocate
DT configuration memory dynamically.
This refactoring keeps the existing RZ/N1 support intact while preparing
the driver to handle the different configuration requirements of the
RZ/T2H SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250910204132.319975-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pcs-rzn1-miic driver makes use of ARRAY_SIZE(), BIT() and GENMASK()
macros but does not explicitly include the headers where they are
defined. Add the missing <linux/array_size.h> and <linux/bits.h>
includes.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250910204132.319975-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the trailing comma after the sentinel entry in the
of_device_id match table.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250910204132.319975-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add device tree binding support for RZ/T2H and RZ/N2H SoCs to the
existing RZ/N1 MIIC converter binding. These SoCs share similar MIIC
functionality but have architectural differences that require schema
updates.
Add new compatible strings "renesas,r9a09g077-miic" for RZ/T2H and
"renesas,r9a09g087-miic" for RZ/N2H, with the latter falling back to
the RZ/T2H variant. The new SoCs require reset support with two reset
lines for converter register reset and converter reset, which are not
present on RZ/N1.
Update port configurations to accommodate the different architectures.
RZ/N1 supports 5 ports numbered 1-5 with complex input mappings
covering indices 0-13, while RZ/T2H and RZ/N2H support 4 ports
numbered 0-3 with simplified input mappings covering indices 0-8.
Extend the switch port configuration property to support value 0 for
the new SoCs.
Add a new dt-bindings header file with media interface connection
matrix constants that map GMAC, ESC, and ETHSW ports to numeric
identifiers for use with RZ/T2H and RZ/N2H device trees.
Update DT schema validation to ensure proper port numbering and input
mappings per SoC variant.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250910204132.319975-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add glue layer support for Exynos7870 DSIM in Exynos DSI driver
. Introduces Exynos7870 DSIM bridge integration at Exynos DRM DSI layer.
Bug fixups for exynos7_drm_decon.c module
- Remove redundant ctx->suspended state handling
. Cleans up unused state check logic as call flow is now correctly managed.
. Fixes an issue where decon_commit() was blocked from decon_atomic_enable() due to incorrect state setting.
-----BEGIN PGP SIGNATURE-----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=EMj+
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
New feature
- Add glue layer support for Exynos7870 DSIM in Exynos DSI driver
. Introduces Exynos7870 DSIM bridge integration at Exynos DRM DSI layer.
Bug fixups for exynos7_drm_decon.c module
- Remove redundant ctx->suspended state handling
. Cleans up unused state check logic as call flow is now correctly managed.
. Fixes an issue where decon_commit() was blocked from decon_atomic_enable() due to incorrect state setting.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://lore.kernel.org/r/20250915113543.51294-1-inki.dae@samsung.com
- Add DSIM bridge driver support for Exynos7870
. Introduces Exynos7870 DSIM IP block support in the samsung-dsim bridge driver.
- Document Exynos7870 DSIM compatible in dt-bindings
. Adds exynos7870 compatible string and required clocks in device tree schema.
-----BEGIN PGP SIGNATURE-----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=Bl4w
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-misc-next-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
New feature
- Add DSIM bridge driver support for Exynos7870
. Introduces Exynos7870 DSIM IP block support in the samsung-dsim bridge driver.
- Document Exynos7870 DSIM compatible in dt-bindings
. Adds exynos7870 compatible string and required clocks in device tree schema.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://lore.kernel.org/r/20250915111802.28177-1-inki.dae@samsung.com
Changes for v6.18
GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a663 speedbins
- a623 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- various fixes
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
- DSI PHY fixes, correcting programming glitches
- misc small fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://lore.kernel.org/r/CACSVV01FgXN+fD6U1Hi6Tj4WCf=V-+NO8BXi+80iS4qOZwpaGg@mail.gmail.com
The function, fw_destroy_nodes(), is used widely within firewire-core
module. It has a prerequisite condition that struct fw_card.lock must
be hold in advance.
This commit adds annotation for it.
Link: https://lore.kernel.org/r/20250915234747.915922-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
At present the parameters to compute timeout time for split transaction is
protected by card-wide spin lock, while it is not necessarily convenient
in a point to narrower critical section.
This commit adds and uses another spin lock specific for the purpose.
Link: https://lore.kernel.org/r/20250915234747.915922-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The list of instance for asynchronous transaction to wait for response
subaction is maintained as a member of fw_card structure. The card-wide
spinlock is used at present for any operation over the list, however it
is not necessarily suited for the purpose.
This commit adds and uses the spin lock specific to maintain the list.
Link: https://lore.kernel.org/r/20250915234747.915922-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
At present, the operation for read transaction to topology map register is
not protected by any kind of lock primitives. This causes a potential
problem to result in the mixed content of topology map.
This commit adds and uses spin lock specific to topology map.
Link: https://lore.kernel.org/r/20250915234747.915922-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The list of receivers for phy packet is used only by cdev layer, while it
is maintained as a member of fw_card structure.
This commit maintains the list locally in cdev layer.
Link: https://lore.kernel.org/r/20250915234747.915922-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
At present, guard() macro is used for the critical section to update
topology. It is inconvenient to add the other critical sections into
the function.
This commit uses scoped_guard() macro instead.
Link: https://lore.kernel.org/r/20250915234747.915922-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
We need to increment i_fastreg_wrs before we bail out from
rds_ib_post_reg_frmr().
We have a fixed budget of how many FRWR operations that can be
outstanding using the dedicated QP used for memory registrations and
de-registrations. This budget is enforced by the atomic_t
i_fastreg_wrs. If we bail out early in rds_ib_post_reg_frmr(), we will
"leak" the possibility of posting an FRWR operation, and if that
accumulates, no FRWR operation can be carried out.
Fixes: 1659185fb4 ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode")
Fixes: 3a2886cca7 ("net/rds: Keep track of and wait for FRWR segments in use upon shutdown")
Cc: stable@vger.kernel.org
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250911133336.451212-1-haakon.bugge@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When generating keying material during an authentication transaction
(secure channel concatenation), the HKDF-Expand-Label function is part
of the specified key derivation process.
The current open-coded implementation misses the length prefix
requirements on the HkdfLabel label and context variable-length vectors
(RFC 8446 Section 3.4).
Instead, use the hkdf_expand_label() function.
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Provide an implementation of RFC 8446 (TLS 1.3) HKDF-Expand-Label
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The following patches will modify ECN helpers and add AccECN herlpers,
and this patch moves the existing ones into a separated include file.
No functional changes.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250911110642.87529-5-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following patch will use tcp_ecn_mode_accecn(),
TCP_ACCECN_CEP_INIT_OFFSET, TCP_ACCECN_CEP_ACE_MASK in
__tcp_fast_path_on() to make new flag for AccECN.
No functional changes.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250911110642.87529-3-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for AccECN that needs to have access here on IP ECN
field value which is only available after INET_ECN_xmit().
No functional changes.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250911110642.87529-2-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ErrorString() and SafeString() docutils functions were helpers meant to
ease the handling of encodings during the Python 3 transition. There is no
real need for them after Python 3.6, and docutils 0.22 removes them,
breaking the docs build
Handle this by just injecting our own one-liner version of ErrorString(),
and removing the sole SafeString() call entirely.
Reported-by: Zhixu Liu <zhixu.liu@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <87ldmnv2pi.fsf@trenco.lwn.net>
As stated definitively by Linus, the use of Link: tags should be limited to
situations where there is additional useful information to be found at the
far end of the link. Update our documentation to reflect that policy, and
to remove the suggestion for a Git hook to add those tags automatically.
Link: https://lore.kernel.org/all/CAHk-=wh5AyuvEhNY9a57v-vwyr7EkPVRUKMPwj92yF_K0dJHVg@mail.gmail.com/
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <87segwyc3p.fsf@trenco.lwn.net>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
The change to virt_prcm_set_ops had to be made manually.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-arm32-clk-round-rate-v1-2-a9146b77aca9@redhat.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Acked-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20250710-arm32-clk-round-rate-v1-1-a9146b77aca9@redhat.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Clear EEE runtime flags when the PHY transitions to HALTED or ERROR
and the state machine drops the link. This avoids stale EEE state being
reported via ethtool after the PHY is stopped or hits an error.
This change intentionally only clears software runtime flags and avoids
MDIO accesses in HALTED/ERROR. A follow-up patch will address other
link state variables.
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250912132000.1598234-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For the tc police action, iproute2 rounds up mtu and burst sizes to a
higher order representation. For example, if the user specifies the default
mtu for a police action instance (4294967295 bytes), iproute2 will output
it as 4096Mb when this action instance is dumped. After Jay's changes [1],
iproute2 will round up to Gb, so 4096Mb becomes 4Gb. With that in mind,
fix police's tc test output so that it works both with the current
iproute2 version and Jay's.
[1] https://lore.kernel.org/netdev/20250907014216.2691844-1-jay.vosburgh@canonical.com/
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Cong Wang <cwang@multikernel.io>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://patch.msgid.link/20250912154616.67489-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
