Enable 160MHz beamformee support on mt7922 by updating HE capability
element configuration. Previously, only 160MHz channel width was set,
but beamformee for 160MHz was not properly advertised. This patch
adds BEAMFORMEE_MAX_STS_ABOVE_80MHZ_4 capability to allow devices
to utilize 160MHz BW for beamforming.
Tested by connecting to 160MHz-bandwidth beamforming AP and verified
HE capability.
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Link: https://patch.msgid.link/ae637afaffed387018fdc43709470ef65898ff0b.1756383627.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Due to hibernation causing a power off and power on,
this modification adds mt7925_pci_restore callback function for kernel.
When hibernation resumes, it calls mt7925_pci_restore to reset the device,
allowing it to return to the state it was in before the power off.
Signed-off-by: Jack Kao <jack.kao@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250901073200.230033-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In order to avoid a possible NULL pointer dereference in
mt7996_mac_sta_init_link routine, move the phy pointer check before
running mt7996_mac_sta_init_link() in mt7996_mac_sta_add_links routine.
Fixes: dd82a9e02c ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250830-mt7996_mac_sta_add_links-fix-v1-1-4219fb8755ee@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Packets belonging to the same TID can be sent over multiple links.
AMPDU rx reordering must be performed over all active links. Fix the
problem always using default link for AMPDU rx reordering.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250823-mt7996-mlo-aggr-fix-v1-1-f35cf0ea4c8a@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In mt76_wmac_probe(), when the mt76_alloc_device() call succeeds, memory
is allocated for both struct ieee80211_hw and a workqueue. However, on
the error path, the workqueue is not freed. Fix that by calling
mt76_free_device() on the error path.
Fixes: c8846e1015 ("mt76: add driver for MT7603E and MT7628/7688")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20250709145532.41246-1-abdun.nihaal@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Overwrite 802.11 destination address with in-use link address for MLD
capable VIFs in mt7996_tx routine.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://patch.msgid.link/20250731-mt7996-mlo-devel-v1-2-7ff4094285d0@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In order to get the ieee80211_sta pointer from wcid struct for a MLO
client, set def_wcid pointer in mt7996_mac_sta_init_link routine.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://patch.msgid.link/20250731-mt7996-mlo-devel-v1-1-7ff4094285d0@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When the destroy CM ID timeout kicks in, you typically get a storm of
them which creates a log flooding. Hence, change pr_err() to
pr_err_ratelimited() in cm_destroy_id_wait_timeout().
Fixes: 96d9cbe2f2 ("RDMA/cm: add timeout to cm_destroy_id wait")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Link: https://patch.msgid.link/20250912100525.531102-1-haakon.bugge@oracle.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When doing load balance and the target cfs_rq is in throttled hierarchy,
whether to allow balancing there is a question.
The good side to allow balancing is: if the target CPU is idle or less
loaded and the being balanced task is holding some kernel resources,
then it seems a good idea to balance the task there and let the task get
the CPU earlier and release kernel resources sooner. The bad part is, if
the task is not holding any kernel resources, then the balance seems not
that useful.
While theoretically it's debatable, a performance test[0] which involves
200 cgroups and each cgroup runs hackbench(20 sender, 20 receiver) in
pipe mode showed a performance degradation on AMD Genoa when allowing
load balance to throttled cfs_rq. Analysis[1] showed hackbench doesn't
like task migration across LLC boundary. For this reason, add a check in
can_migrate_task() to forbid balancing to a cfs_rq that is in throttled
hierarchy. This reduced task migration a lot and performance restored.
[0]: https://lore.kernel.org/lkml/20250822110701.GB289@bytedance/
[1]: https://lore.kernel.org/lkml/20250903101102.GB42@bytedance/
Signed-off-by: Aaron Lu <ziqianlu@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
With the introduction of task based throttle model, task in a throttled
hierarchy is allowed to continue to run till it gets throttled on its
ret2user path.
For this reason, remove those throttled_hierarchy() checks in the
following functions so that those tasks can get their turn as normal
tasks: dequeue_entities(), check_preempt_wakeup_fair() and
yield_to_task_fair().
The benefit of doing it this way is: if those tasks gets the chance to
run earlier and if they hold any kernel resources, they can release
those resources earlier. The downside is, if they don't hold any kernel
resouces, all they can do is to throttle themselves on their way back to
user space so the favor to let them run seems not that useful and for
check_preempt_wakeup_fair(), that favor may be bad for curr.
K Prateek Nayak pointed out prio_changed_fair() can send a throttled
task to check_preempt_wakeup_fair(), further tests showed the affinity
change path from move_queued_task() can also send a throttled task to
check_preempt_wakeup_fair(), that's why the check of task_is_throttled()
in that function.
Signed-off-by: Aaron Lu <ziqianlu@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
With task based throttle model, tasks in a throttled hierarchy are
allowed to continue to run if they are running in kernel mode. For this
reason, PELT clock is not stopped for these cfs_rqs in throttled
hierarchy when they still have tasks running or queued.
Since PELT clock is not stopped, whether to allow update_cfs_group()
doing its job for cfs_rqs which are in throttled hierarchy but still
have tasks running/queued is a question.
The good side is, continue to run update_cfs_group() can get these
cfs_rq entities with an up2date weight and that up2date weight can be
useful to derive an accurate load for the CPU as well as ensure fairness
if multiple tasks of different cgroups are running on the same CPU.
OTOH, as Benjamin Segall pointed: when unthrottle comes around the most
likely correct distribution is the distribution we had at the time of
throttle.
In reality, either way may not matter that much if tasks in throttled
hierarchy don't run in kernel mode for too long. But in case that
happens, let these cfs_rq entities have an up2date weight seems a good
thing to do.
Signed-off-by: Aaron Lu <ziqianlu@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Before task based throttle model, propagating load will stop at a
throttled cfs_rq and that propagate will happen on unthrottle time by
update_load_avg().
Now that there is no update_load_avg() on unthrottle for throttled
cfs_rq and all load tracking is done by task related operations, let the
propagate happen immediately.
While at it, add a comment to explain why cfs_rqs that are not affected
by throttle have to be added to leaf cfs_rq list in
propagate_entity_cfs_rq() per my understanding of commit 0258bdfaff
("sched/fair: Fix unfairness caused by missing load decay").
Signed-off-by: Aaron Lu <ziqianlu@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
I would like to help review atomic related patches, especially Rust
related ones, hence add myself as an reviewer.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250723233312.3304339-6-gary@kernel.org
Currently there's a custom reference counting in `block::mq`, which uses
`AtomicU64` Rust atomics, and this type doesn't exist on some 32-bit
architectures. We cannot just change it to use 32-bit atomics, because
doing so will make it vulnerable to refcount overflow. So switch it to
use the kernel refcount `kernel::sync::Refcount` instead.
There is an operation needed by `block::mq`, atomically decreasing
refcount from 2 to 0, which is not available through refcount.h, so
I exposed `Refcount::as_atomic` which allows accessing the refcount
directly.
[boqun: Adopt the LKMM atomic API]
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20250723233312.3304339-5-gary@kernel.org
With `Refcount` type created, `Arc` can use `Refcount` instead of
calling into FFI directly.
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Link: https://lore.kernel.org/r/20250723233312.3304339-4-gary@kernel.org
Make `Arc::into_unique_or_drop` to become a mere associated function
instead of a method (i.e. removing the `self` receiver).
It's a general convention for Rust smart pointers to avoid having
methods defined on them, because if the pointee type has a method of the
same name, then it is shadowed. This is normally for avoiding semver
breakage, which isn't an issue for kernel codebase, but it's still
generally a good practice to follow this rule, so that `ptr.foo()` would
always be calling a method on the pointee type.
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Link: https://lore.kernel.org/r/20250723233312.3304339-3-gary@kernel.org
This is a wrapping layer of `include/linux/refcount.h`. Currently the
kernel refcount has already been used in `Arc`, however it calls into
FFI directly.
[boqun: Add the missing <> for the link in comment]
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Link: https://lore.kernel.org/r/20250723233312.3304339-2-gary@kernel.org
Memory barriers are building blocks for concurrent code, hence provide
a minimal set of them.
The compiler barrier, barrier(), is implemented in inline asm instead of
using core::sync::atomic::compiler_fence() because memory models are
different: kernel's atomics are implemented in inline asm therefore the
compiler barrier should be implemented in inline asm as well. Also it's
currently only public to the kernel crate until there's a reasonable
driver usage.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Link: https://lore.kernel.org/all/20250719030827.61357-10-boqun.feng@gmail.com/
Add generic atomic support for `usize` and `isize`. Note that instead of
mapping directly to `atomic_long_t`, the represention type
(`AtomicType::Repr`) is selected based on CONFIG_64BIT. This reduces
the necessity of creating `atomic_long_*` helpers, which could save
the binary size of kernel if inline helpers are not available. To do so,
an internal type `isize_atomic_repr` is defined, it's `i32` in 32bit
kernel and `i64` in 64bit kernel.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Link: https://lore.kernel.org/all/20250719030827.61357-9-boqun.feng@gmail.com/
Add generic atomic support for basic unsigned types that have an
`AtomicImpl` with the same size and alignment.
Unit tests are added including Atomic<i32> and Atomic<i64>.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Link: https://lore.kernel.org/all/20250719030827.61357-8-boqun.feng@gmail.com/
One important set of atomic operations is the arithmetic operations,
i.e. add(), sub(), fetch_add(), add_return(), etc. However it may not
make senses for all the types that `AtomicType` to have arithmetic
operations, for example a `Foo(u32)` may not have a reasonable add() or
sub(), plus subword types (`u8` and `u16`) currently don't have
atomic arithmetic operations even on C side and might not have them in
the future in Rust (because they are usually suboptimal on a few
architecures). Therefore the plan is to add a few subtraits of
`AtomicType` describing which types have and can do atomic arithemtic
operations.
One trait `AtomicAdd` is added, and only add() and fetch_add() are
added. The rest will be added in the future.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Link: https://lore.kernel.org/all/20250719030827.61357-7-boqun.feng@gmail.com/
xchg() and cmpxchg() are basic operations on atomic. Provide these based
on C APIs.
Note that cmpxchg() use the similar function signature as
compare_exchange() in Rust std: returning a `Result`, `Ok(old)` means
the operation succeeds and `Err(old)` means the operation fails.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Link: https://lore.kernel.org/all/20250719030827.61357-6-boqun.feng@gmail.com/
To provide using LKMM atomics for Rust code, a generic `Atomic<T>` is
added, currently `T` needs to be Send + Copy because these are the
straightforward usages and all basic types support this.
Implement `AtomicType` for `i32` and `i64`, and so far only basic
operations load() and store() are introduced.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Link: https://lore.kernel.org/all/20250719030827.61357-5-boqun.feng@gmail.com/
Preparation for atomic primitives. Instead of a suffix like _acquire, a
method parameter along with the corresponding generic parameter will be
used to specify the ordering of an atomic operations. For example,
atomic load() can be defined as:
impl<T: ...> Atomic<T> {
pub fn load<O: AcquireOrRelaxed>(&self, _o: O) -> T { ... }
}
and acquire users would do:
let r = x.load(Acquire);
relaxed users:
let r = x.load(Relaxed);
doing the following:
let r = x.load(Release);
will cause a compiler error.
Compared to suffixes, it's easier to tell what ordering variants an
operation has, and it also make it easier to unify the implementation of
all ordering variants in one method via generic. The `TYPE` associate
const is for generic function to pick up the particular implementation
specified by an ordering annotation.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Link: https://lore.kernel.org/all/20250719030827.61357-4-boqun.feng@gmail.com/
Preparation for generic atomic implementation. To unify the
implementation of a generic method over `i32` and `i64`, the C side
atomic methods need to be grouped so that in a generic method, they can
be referred as <type>::<method>, otherwise their parameters and return
value are different between `i32` and `i64`, which would require using
`transmute()` to unify the type into a `T`.
Introduce `AtomicImpl` to represent a basic type in Rust that has the
direct mapping to an atomic implementation from C. Use a sealed trait to
restrict `AtomicImpl` to only support `i32` and `i64` for now.
Further, different methods are put into different `*Ops` trait groups,
and this is for the future when smaller types like `i8`/`i16` are
supported but only with a limited set of API (e.g. only set(), load(),
xchg() and cmpxchg(), no add() or sub() etc).
While the atomic mod is introduced, documentation is also added for
memory models and data races.
Also bump my role to the maintainer of ATOMIC INFRASTRUCTURE to reflect
my responsibility on the Rust atomic mod.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Link: https://lore.kernel.org/all/20250719030827.61357-3-boqun.feng@gmail.com/
In order to support LKMM atomics in Rust, add rust_helper_* for atomic
APIs. These helpers ensure the implementation of LKMM atomics in Rust is
the same as in C. This could save the maintenance burden of having two
similar atomic implementations in asm.
Originally-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/all/20250719030827.61357-2-boqun.feng@gmail.com/
Refactor error handling in the PCM substream setup to combine redundant
checks and improve code readability. Free the dpcm structure and return
appropriate error codes (-EBUSY for HPI_ERROR_OBJ_ALREADY_OPEN, -EIO
for other errors) in a single block.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The issue was caused by incorrect configuration in the driver,
which prevented proper volume control on certain systems.
Signed-off-by: Bou-Saan Che <yungmeat@inboxia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The laptop does not contain valid _DSD for these amps, so requires
entries into the CS35L41 configuration table to function correctly.
Signed-off-by: Bou-Saan Che <yungmeat@inboxia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This laptop does not contain _DSD so needs to be supported using the
configuration table.
Signed-off-by: Bou-Saan Che <yungmeat@inboxia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since commit 7c010d4633 ("gpiolib: acpi: Make sure we fill struct
acpi_gpio_info"), uninitialized acpi_gpio_info struct are passed to
__acpi_find_gpio() and later in the call stack info->quirks is used in
acpi_populate_gpio_lookup. This breaks the i2c_hid_cpi driver:
[ 58.122916] i2c_hid_acpi i2c-UNIW0001:00: HID over i2c has not been provided an Int IRQ
[ 58.123097] i2c_hid_acpi i2c-UNIW0001:00: probe with driver i2c_hid_acpi failed with error -22
Fix this by initializing the acpi_gpio_info pass to __acpi_find_gpio()
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220388
Fixes: 7c010d4633 ("gpiolib: acpi: Make sure we fill struct acpi_gpio_info")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Tested-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-By: Calvin Owens <calvin@wbinvd.org>
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
If create_monitor_dir() fails, the function returns directly without
releasing rv_interface_lock. This leaves the mutex locked and causes
subsequent monitor registration attempts to deadlock.
Fix it by making the error path jump to out_unlock, ensuring that the
mutex is always released before returning.
Fixes: 24cbfe18d5 ("rv: Merge struct rv_monitor_def into struct rv_monitor")
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20250903065112.1878330-1-zhen.ni@easystack.cn
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Remove redundant include <linux/types.h> to clean up the code.
Move all unique include files inside CONFIG_RV as they are only needed
when CONFIG_RV is enabled. Arrange include files alphabetically.
Fixes: 24cbfe18d5 ("rv: Merge struct rv_monitor_def into struct rv_monitor") [1]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202507312017.oyD08TL5-lkp@intel.com/
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/aJneRbHGlNFg7lr9@bhairav-test.ee.iitb.ac.in
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Argument 'p' of enabled_monitors_next() is not a pointer to struct
rv_monitor, it is actually a pointer to the list_head inside struct
rv_monitor. Therefore it is wrong to cast 'p' to struct rv_monitor *.
This wrong type cast has been there since the beginning. But it still
worked because the list_head was the first field in struct rv_monitor_def.
This is no longer true since commit 24cbfe18d5 ("rv: Merge struct
rv_monitor_def into struct rv_monitor") moved the list_head, and this wrong
type cast became a functional problem.
Properly use container_of() instead.
Fixes: 24cbfe18d5 ("rv: Merge struct rv_monitor_def into struct rv_monitor")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20250806120911.989365-1-namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
When sorting the block group list for reclaim we are using a block group's
used bytes counter without taking the block group's spinlock, so we can
race with a concurrent task updating it (at btrfs_update_block_group()),
which makes tools like KCSAN unhappy and report a race.
Since the sorting is not strictly needed from a functional perspective
and such races should rarely cause any ordering changes (only load/store
tearing could cause them), not to mention that after the sorting the
ordering may no longer be accurate due to concurrent allocations and
deallocations of extents in a block group, annotate the accesses to the
used counter with data_race() to silence KCSAN and similar tools.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_init_file_extent_tree() uses S_ISREG() to determine if the file is
a regular file. In the beginning of btrfs_read_locked_inode(), the i_mode
hasn't been read from inode item, then file_extent_tree won't be used at
all in volumes without NO_HOLES.
Fix this by calling btrfs_init_file_extent_tree() after i_mode is
initialized in btrfs_read_locked_inode().
Fixes: 3d7db6e8bd ("btrfs: don't allocate file extent tree for non regular files")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: austinchang <austinchang@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When moving a block-group to the dedicated data relocation space-info in
btrfs_zoned_reserve_data_reloc_bg() it is asserted that the newly
created block group for data relocation does not contain any
zone_unusable bytes.
But on disks with zone_capacity < zone_size, the difference between
zone_size and zone_capacity is accounted as zone_unusable.
Instead of asserting that the block-group does not contain any
zone_unusable bytes, remove them from the block-groups total size.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Link: https://lore.kernel.org/linux-block/CAHj4cs8-cS2E+-xQ-d2Bj6vMJZ+CwT_cbdWBTju4BV35LsvEYw@mail.gmail.com/
Fixes: daa0fde322 ("btrfs: zoned: fix data relocation block group reservation")
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
