Commit graph

1,403,262 commits

Author SHA1 Message Date
Kumar Gala
e58712111f [POWERPC] 85xx: Added needed MPC85xx PCI device IDs
Added the MPC85xx PCI device IDs that we need for the quirks we have.

Also, fixed the MPC8567E, MPC8567 device IDs which had the wrong value.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24 10:32:05 -05:00
Jon Loeliger
c26c372cdb [POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs
Also add 8641/8641D device IDs as well.
All of which already exist or have been submitted to
The Linux PCI ID Repository at:
    http://pci-ids.ucw.cz/

CC-to: pci-ids@ucw.cz
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24 10:31:58 -05:00
Randy Vinson
6af0125742 [POWERPC] 85xxCDS: MPC8548 DTS cleanup.
Added the P2P bridge present on the Arcadia base board and moved the VIA
Southbridge behind the bridge to reflect its actual position in the bus
organization. Added the RTC that's in the VIA Southbridge and expanded
the ranges array for the SOC node to allow proper address translation of
the RTC registers.

Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24 10:31:55 -05:00
Randy Vinson
8d7bc8f9d1 [POWERPC] 85xxCDS: Misc 8548 PCI Corrections.
Setting the host bridge @8000 as primary. Also fixing a bug in
setting the USB interrupt numbers.

Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24 10:31:49 -05:00
Randy Vinson
bca03c6bdd [POWERPC] 85xxCDS: Delay 8259 cascade hookup.
The interrupts of an E100 card inserted in PCI slot 4 may be on at bootup.
The resulting interrupt flood interacts with the 8259 cascade handler and
prevents proper boot up. There is a quirk for the E100 that will disable
the E100's interrupts but to use it, the 8259 cascade hookup must be
delayed until after the quirk has run. This patch delays the 8259 cascade
hookup by registering a device_initcall() which runs after the PCI quirk
for the E100.

Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24 10:31:34 -05:00
Rafael J. Wysocki
50ad147aa0 ACPI: Remove references to ACPI_STATE_S2 from acpi_pm_enter
Remove references to ACPI_STATE_S2, introduced by
acpi-implement-the-set_target-callback-from-pm_ops.patch, from acpi_pm_enter().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-24 11:23:50 -04:00
Atsushi Nemoto
cdcc9eb5e0 [MIPS] Fix marge error due to conflict in arch/mips/kernel/head.S
__INIT directive just before kernel_entry was ignored for most platforms.
This patch fixes it and get rid of this warning:

WARNING: vmlinux.o(.text+0x478): Section mismatch: reference to .init.text:start_kernel (between '_stext' and 'run_init_process')

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-24 16:02:48 +01:00
Yoichi Yuasa
18d0e9b479 [MIPS] ARC: Remove unused arch/mips/arc/console.c
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-24 16:02:48 +01:00
Thomas Bogendoerfer
cbe7b45c1d [MIPS] SNI: sniprom
- fix compile error due to missing #include
- fix section mismatch warning

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-24 16:02:48 +01:00
Yoichi Yuasa
34ec6e76a6 [MIPS] Jazz: remove unneeded reset functions
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-24 16:02:48 +01:00
Ralf Baechle
eeea55163d [MIPS] Whitespace cleanup.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-24 16:02:47 +01:00
Atsushi Nemoto
4614c32645 [MIPS] Make resources for ds1742 "static __initdata"
We can make resources for platform_device_register_simple() "static
__initdata".

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-24 16:02:47 +01:00
David Rientjes
f5dbeaf5ed [MIPS] Replace __attribute_used__ with __used
Replaces the deprecated __attribute_used__ with __used.  Also makes some
style adjustments to abide by the kernel coding conventions.

Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-24 16:02:47 +01:00
Yoichi Yuasa
fce2303166 [MIPS] Jazz: Remove unused arch/mips/jazz/io.c
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-24 16:02:47 +01:00
Atsushi Nemoto
fb4bb133ad [MIPS] Mark prom_free_prom_memory as __init_refok
> WARNING: vmlinux.o(.text+0xbf20): Section mismatch: reference to
> .init.text:prom_free_prom_memory (between 'free_initmem' and 'copy_from_user_page')

prom_free_prom_memory() is called _before_ freeing init sections, so
it is false positive.  __init_refok can be used for such cases.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-24 16:02:47 +01:00
Yoichi Yuasa
9a0f3b7360 [MIPS] MIPSsim: Fix cflags
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-24 16:02:47 +01:00
Michael Hennerich
314c98d589 Blackfin arch: add missing gpio error handling to make sure we roll back requests in case one fails
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-24 18:03:45 +08:00
Michael Hennerich
06039e90b9 Blackfin arch: Fix define - SPORT0_DTPRI is first function
Sigend-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-27 16:57:55 +08:00
Bryan Wu
7c100f3b90 Blackfin arch: fix bugs report by Andy Liu <yjhsou@gmail.com>, AD1836 can't be probed in BF561-EZ
Cc: Andy Liu <yjhsou@gmail.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05 15:43:03 +08:00
Bryan Wu
214cccbbb2 Blackfin arch: bug fixing, add missing BF533_FAMILY GPIO_PFx definition
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25 14:42:03 +08:00
Eric Miao
981d0f3952 [ARM] 4526/1: pxa: make ARCH_PXA select GENERIC_CLOCKEVENTS
make ARCH_PXA select GENERIC_CLOCKEVENTS to fix the
building issue due to merge of clockevents based PXA
timer

Signed-off-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-24 09:47:16 +01:00
Jens Axboe
71f65e6bd7 [BLOCK] Add request_queue_t and mark it deprecated
Andrew thinks I should be nice and allow outside code to at least just
compile, so add the request_queue_t typedef back and mark it deprecated.
It'll warn people that this type is going away soonish.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-24 10:29:42 +02:00
Michael Hennerich
31430ba58a Blackfin arch: Add PORT_J.High (needed for BF548-EZkit Touchscreen interrupts) - remove PORT_C.H
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-24 16:27:25 +08:00
Michael Hennerich
27b92bdbd5 Input Serio: Blackfin doesnt support I8042 - make sure it doesnt get selected
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-24 15:56:17 +08:00
Bryan Wu
d8e715428f Blackfin arch: add BF54x I2C/TWI TWI0 driver support
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25 16:58:03 +08:00
Jens Axboe
165125e1e4 [BLOCK] Get rid of request_queue_t typedef
Some of the code has been gradually transitioned to using the proper
struct request_queue, but there's lots left. So do a full sweet of
the kernel and get rid of this typedef and replace its uses with
the proper type.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-24 09:28:11 +02:00
Michael Hennerich
6782ea9ae8 Blackfin arch: Add label to call new GPIO API
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-24 15:16:59 +08:00
Michael Hennerich
40d63406a0 Blackfin arch: store labels so we later know who allocated GPIO/Peripheral resources
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10 22:55:30 +08:00
Michael Hennerich
b2d1583f8e Blackfin arch: Advertise GENERIC_GPIO and remove duplicated GENERIC_CALIBRATE_DELAY
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-24 15:46:36 +08:00
Michael Hennerich
301af2952b Blackfin arch: Finalize the generic gpio support - add gpio_to_irq and irq_to_gpio
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-24 15:35:53 +08:00
Mike Frysinger
bc8c84c947 Blackfin arch: update to latest anomaly sheets
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05 17:32:25 +08:00
Robin Getz
fb51d56680 Blackfin arch: Fix Anomaly hanlding, as pointed out by Mike
Signed-off-by: Robin Getz <robin.getz@analog.com>
Cc: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-03 17:56:29 +08:00
Mike Frysinger
35c724f310 Blackfin arch: fix typo... we want csync in CSYNC(), not ssync
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-03 16:48:13 +08:00
Mike Frysinger
e208f83a7a Blackfin arch: use HI/LO macros rather than masking the bit ranges ourselves
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25 10:11:42 +08:00
Mike Frysinger
36a1548f99 Blackfin arch: reorganize headers slightly so we can be sure things are defined early enough
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25 12:01:19 +08:00
Mike Frysinger
d5148ffa60 Blackfin arch: use the [CS]SYNC() macros which include anomaly workarounds rather than __builtin_bfin_[cs]sync()
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25 11:57:42 +08:00
Mike Frysinger
60e9356d77 Blackfin arch: update BF54x anomaly list
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Roy Huang <roy.huang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25 11:56:01 +08:00
Mike Frysinger
1aafd90912 Blackfin arch: revise anomaly handling by basing things on the compiler not the kconfig defines
revise anomaly handling by basing things on the compiler not the kconfig defines,
so the header is stable and usable outside of the kernel. This also allows us to
move some code from preprocessing to compiling (gcc culls dead code)
which should help with code quality (readability, catch minor bugs, etc...).

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25 11:19:14 +08:00
Mike Frysinger
287050fe13 Blackfin arch: cleanup and standardize anomaly.h file format -- no functional changes
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-24 15:23:20 +08:00
Bryan Wu
c6c4d7bbbb Blackfin arch: update platform driver resource information to all board files
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-11 01:20:06 +08:00
Len Brown
7c5aa6642f ACPI: Kconfig: always enable CONFIG_ACPI_SLEEP on X86
The SMP dependency on HOTPLUG_CPU and SUSPEND_SMP
caused more harm than good -- making ACPI sleep
support vanish for configs missing those options.
So simply select them on the (ACPI && SMP && X86) systems
that need them.

Also, remove the prompt for ACPI_SLEEP,
virtually nobody (intentionally) enables ACPI without it.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-24 02:25:03 -04:00
Len Brown
43532c8a46 ACPI: Kconfig: fold /proc/acpi/sleep under CONFIG_ACPI_PROCFS
/proc/acpi/sleep has had its own "default n" option,
ACPI_SLEEP_PROC_SLEEP, for many months.
Time to delete ACPI_SLEEP_PROC_SLEEP.

Users that still need /proc/acpi/sleep can still get it
along with the other deprecated /proc/acpi files
by enabling CONFIG_ACPI_PROCFS.

Also delete ACPI_SLEEP_PROC_FS, which was an umbrella
for /proc/acpi/sleep, wakeup, alarm, because it was
effectively just a synonym for ACPI_SLEEP.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-24 02:16:50 -04:00
Len Brown
fb80471456 ACPI: Kconfig: CONFIG_ACPI_PROCFS now defaults to N
delete "default y" from CONFIG_ACPI_PROCFS
(effectively making the default 'N')

List exactly what /proc files this option controls,
and clarify that it doesn't change non-deprecated files.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-24 01:50:46 -04:00
Adrian McMenamin
eb695dbf00 sh: Fix Dreamcast DMA issues.
The current SH DMA API is somewhat broken, not correctly matching
virtual channel to the correct SH DMAC. This wasn't noticeable when
using g2 DMA for the sound driver - one channel 0 is as good as any
other! - but caused the pvr2 driver to fail.

This patch fixes the pvr2 problem and consequently fixes the sound
driver to ensure it continues to function.

Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-24 13:30:55 +09:00
Paul Mundt
8cf1a74305 sh: Add kmap_coherent()/kunmap_coherent() interface for SH-4.
This wires up kmap_coherent() and kunmap_coherent() on SH-4, and
moves away from the p3map_mutex and reserved P3 space, opting to
use fixmaps for colouring instead.

The copy_user_page()/clear_user_page() implementations are moved
to this, which fixes the nasty blowups with spinlock debugging
as a result of having some of these calls nested under the page
table lock.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-24 13:28:26 +09:00
Randy Vinson
637e9e13a1 [POWERPC] 85xxCDS: Make sure restart resets the PCI bus.
The current 85xxCDS restart code fails to reset the PCI bus which can
lead to odd behavior after the restart. This patch uses the VIA Super
Southbridge to perform a PCI reset which will reset the entire system.
NOTE: Since the VIA chip is behind a PCI-to-PCI bridge which can be
disabled with a switch setting, it may not be possible to perform the
PCI bus reset. In this case, the code defaults to the previous restart
mechanism.

Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 22:35:12 -05:00
Randy Vinson
3620fc1da2 [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line.
The Freescale MPC8555CDS and MPC8548CDS reference hardware has a legacy
8259 interrupt controller pair contained within a VIA VT82C686B Southbridge
on the main carrier board. The processor complex plugs into the carrier
card using a PCI slot which limits the available interrupts to the
INTA-INTD PCI interrupts. The output of the 8259 cascade pair is routed
through a gate array and connected to the PCI INTA interrupt line.
The normal interrupt chaining hook (set_irq_chained_handler) does
not allow sharing of the chained interrupt which prevents the
use of PCI INTA by PCI devices. This patch allows the 8259 cascade
pair to share their interrupt line with PCI devices.

NOTE: The addition of the .end routine for the MPIC is not strictly
necessary for this patch. It's there so this code will run from within
the threaded interrupt context used by the Real Time patch.

Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 22:34:40 -05:00
Kumar Gala
eb12af4333 [POWERPC] FSL: Add support for PCI-X controllers
Some set of 85xx platforms have PCI-X controllers.  The old arch/ppc
code setup these controllers and we haven't moved it over to arch/powerpc.

We use the PCI-X Capabilties to know if we are in PCI-X mode instead
of the Global Utilities PORDEVSR.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 22:30:14 -05:00
Kumar Gala
7391ff35b2 [POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHB
For the Freescale PCIe PHBs Not all firmwares setup the virtual P2P
bridge registers properly.  Make sure they get setup based on what
the struct pci_controller got from the device tree.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 22:30:11 -05:00
Kumar Gala
f64fddbeac [POWERPC] Provide ability to setup P2P bridge registers from struct resource
We need the ability to set P2P bridge registers to properly setup the virtual
P2P bridges that exist in PCIe controllers for some of the embedded setups.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 22:30:08 -05:00