All xe_sriov_vf_ccs() functions but init() expect to be called
when initialization was successful and CCS handling is ready.
Update IS_VF_CCS_READY macro and use it as single entry guard.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250908123025.747-5-michal.wajdeczko@intel.com
We only use this macro once and we can open-code it to explicitly
show relevant conditions and avoid duplications.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250908123025.747-4-michal.wajdeczko@intel.com
In H2G action context type is specified in flags dword in bits 2:1.
Use generic FIELD_PREP macro instead of misleading BIT logic.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250908123025.747-3-michal.wajdeczko@intel.com
This function is dedicated for use by the VFs, we shouldn't use
name that might suggests it's general purpose. While there, update
asserts to better reflect intended usage.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250908123025.747-2-michal.wajdeczko@intel.com
Unlike VLAN devices, HSR changes the lower device’s rx_handler, which
prevents the lower device from being attached to another master.
Switch to using netdev_master_upper_dev_link() when setting up the lower
device.
This could improves user experience, since ip link will now display the
HSR device as the master for its ports.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902065558.360927-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It was planed that iwlmld will be loaded also for HR and GF, which has
versions < 6. But eventually it was decided to keep use iwlmvm for those
devices, so iwlmld doesn't need to support those versions.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.42501c7b0baa.I207ff53d259cc90781a0082320e2646b35925e5f@changeid
Add per key status indication in the WOWLAN status notification.
This update is required for fips. Each key entry now
includes a status field.
Keys are now processed as follows:
0: no key, ignore entry
1: old, use only metadata
2: new, use key material and metadata
While at it, fix tid_offloaded_tx error message to print the
actual variable being validated in iwl_mld_handle_wowlan_info_notif.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.0a2e7a62504c.Id195c9c83f9f767d1e3e458468af2d933774daa1@changeid
Currently it is under iwl_trans, which is the bus agnostic part of the
transport. But really it is relevant for pcie only, so move it to the
iwl_trans_pcie and export it via an API to the opmode.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.9f9dc80ab06c.I3eeca8b17abeba6ed30f0d681518c81ede0acf30@changeid
Currently it is under iwl_trans, which is the bus agnostic part of the
transport. But really it is relevant for pcie only, so move it to the
iwl_trans_pcie and export it via an API to the opmode.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.997193cabd04.Ic6648f040430c94150d0fa11601f50a6a630b862@changeid
The function is called so because for older devices it sets a bit called
"init_done". But for the latest devices it sets a different bit,
"mac_init". Since this name is not clear anyway, rename it such that it
indicates the logic of the newer devices.
Also add the 'trans' prefix so iw will be clear from the name that this
is a transport API.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.a1de688e574b.Ibd41b0c8f7fbae77026e76dbbc085df3eecec538@changeid
Add iwl_trans_notify_fw_error() and iwl_trans_is_fw_error() for use by
op modes. These helpers provide a clean interface for marking and
checking firmware error state. This hides the trans internal
implementation details from callers.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.23f5160b3265.Iba325ffa4c6c6f7fc3a702fb6c1827b0857d0db3@changeid
vdso_test_abi provides the exact same functionality, properly uses
kselftest.h and explicitly calls into the vDSO without relying on the libc.
Drop the pointless testcase.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-8-90f499dd35f8@linutronix.de
To be y2038-safe, 32-bit userspace needs to explicitly call the 64-bit safe
time APIs. For this the 32-bit vDSOs contains a clock_gettime() variant
which always uses 64-bit time types.
Also test this vDSO function.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-7-90f499dd35f8@linutronix.de
The array relies on the numeric values of the clock IDs.
When reading the code it is not obvious that the order is correct.
Make the code easier to read by using explicit indices.
While at it make the array static.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-5-90f499dd35f8@linutronix.de
The test uses the kselftest.h framework and declares in its testplan to
always execute 16 testcases. If any of the clockids were not available,
the testplan would not be satisfied anymore and the test would fail.
Apparently that never happened, so the clockids are always available.
Remove the pointless checks.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-4-90f499dd35f8@linutronix.de
If AT_SYSINFO_EHDR is missing the whole test needs to be skipped.
Currently this results in the following output:
TAP version 13
1..16
# AT_SYSINFO_EHDR is not present!
This output is incorrect, as "1..16" still requires the subtest lines to
be printed, which isn't done however.
Switch to the correct skipping functions, so the output now correctly
indicates that no subtests are being run:
TAP version 13
1..0 # SKIP AT_SYSINFO_EHDR is not present!
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-2-90f499dd35f8@linutronix.de
The _rval register variable is meant to be an output operand of the asm
statement but is instead used as input operand.
clang 20.1 notices this and triggers -Wuninitialized warnings:
tools/testing/selftests/timers/auxclock.c:154:10: error: variable '_rval' is uninitialized when used here [-Werror,-Wuninitialized]
154 | return VDSO_CALL(self->vdso_clock_gettime64, 2, clockid, ts);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/testing/selftests/timers/../vDSO/vdso_call.h:59:10: note: expanded from macro 'VDSO_CALL'
59 | : "r" (_rval) \
| ^~~~~
tools/testing/selftests/timers/auxclock.c:154:10: note: variable '_rval' is declared here
tools/testing/selftests/timers/../vDSO/vdso_call.h:47:2: note: expanded from macro 'VDSO_CALL'
47 | register long _rval asm ("r3"); \
| ^
It seems the list of input and output operands have been switched around.
However as the argument registers are not always initialized they can not
be marked as pure inputs as that would trigger -Wuninitialized warnings.
Adding _rval as another input and output operand does also not work as it
would collide with the existing _r3 variable.
Instead reuse _r3 for both the argument and the return value.
Fixes: 6eda706a53 ("selftests: vDSO: fix the way vDSO functions are called for powerpc")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-1-90f499dd35f8@linutronix.de
Closes: https://lore.kernel.org/oe-kbuild-all/202506180223.BOOk5jDK-lkp@intel.com/
Hangbin Liu says:
====================
bonding: support aggregator selection based on port priority
This patchset introduces a new per-port bonding option: `ad_actor_port_prio`.
It allows users to configure the actor's port priority, which can then be used
by the bonding driver for aggregator selection based on port priority.
This provides finer control over LACP aggregator choice, especially in setups
with multiple eligible aggregators over 2 switches.
====================
Link: https://patch.msgid.link/20250902064501.360822-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add comprehensive selftest to verify:
- Per-port actor priority setting via ad_actor_port_prio
- Aggregator selection behavior with port_priority ad_select policy
Also move cmd_jq helper from forwarding/lib.sh to net/lib.sh for
broader reusability across network selftests.
Here is the result output
# ./bond_lacp_prio.sh
TEST: bond 802.3ad (ad_actor_port_prio setting) [ OK ]
TEST: bond 802.3ad (ad_actor_port_prio select) [ OK ]
TEST: bond 802.3ad (ad_actor_port_prio switch) [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-4-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a new ad_select policy 'port_priority' that uses the per-port
actor priority values (set via ad_actor_port_prio) to determine
aggregator selection.
This allows administrators to influence which ports are preferred
for aggregation by assigning different priority values, providing
more flexible load balancing control in LACP configurations.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-3-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce a new netlink attribute 'actor_port_prio' to allow setting
the LACP actor port priority on a per-slave basis. This extends the
existing bonding infrastructure to support more granular control over
LACP negotiations.
The priority value is embedded in LACPDU packets and will be used by
subsequent patches to influence aggregator selection policies.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
LAN969x uses the Atmel crypto, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
LAN969x uses the Atmel HWRNG, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
LAN969x uses the Atmel TWI I2C, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
LAN969x uses the Atmel SPI, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
LAN969x uses the Atmel USART serial, so make it selectable for
ARCH_MICROCHIP to avoid needing to update depends in future if other
Microchip SoC-s use it as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
LAN969x uses the Atmel USART, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Gma500 unnecessarily clears the framebuffer's GEM-object pointer
before calling drm_framebuffer_cleanup(). Remove this code to make
gma500 consistent with the rest of the drivers.
The change is cosmetic, as drm_framebuffer_cleanup() does not
touch the object pointer on gma500.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250904121157.395128-1-tzimmermann@suse.de
Define the Ports Phy Histogram Configuration Register (PPHCR) to expose
RS-FEC histogram bin ranges, and expose a new counter group in the Ports
Performance Counters Register (PPCNT) to report the corresponding
histogram values.
Co-developed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1756884600-520195-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Pass the right type of flag to vcpu_dat_fault_handler(); it expects a
FOLL_* flag (in particular FOLL_WRITE), but FAULT_FLAG_WRITE is passed
instead.
This still works because they happen to have the same integer value,
but it's a mistake, thus the fix.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: 05066cafa9 ("s390/mm/fault: Handle guest-related program interrupts in KVM")
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
If mmu_notifier_register() fails, for example because a signal was
pending, the mmu_notifier will not be registered. But when the VM gets
destroyed, it will get unregistered anyway and that will cause one
extra mmdrop(), which will eventually cause the mm of the process to
be freed too early, and cause a use-after free.
This bug happens rarely, and only when secure guests are involved.
The solution is to check the return value of mmu_notifier_register()
and return it to the caller (ultimately it will be propagated all the
way to userspace). In case of -EINTR, userspace will try again.
Fixes: ca2fd0609b ("KVM: s390: pv: add mmu_notifier")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
When you run a KVM guest with vhost-net and migrate that guest to
another host, and you immediately enable postcopy after starting the
migration, there is a big chance that the network connection of the
guest won't work anymore on the destination side after the migration.
With a debug kernel v6.16.0, there is also a call trace that looks
like this:
FAULT_FLAG_ALLOW_RETRY missing 881
CPU: 6 UID: 0 PID: 549 Comm: kworker/6:2 Kdump: loaded Not tainted 6.16.0 #56 NONE
Hardware name: IBM 3931 LA1 400 (LPAR)
Workqueue: events irqfd_inject [kvm]
Call Trace:
[<00003173cbecc634>] dump_stack_lvl+0x104/0x168
[<00003173cca69588>] handle_userfault+0xde8/0x1310
[<00003173cc756f0c>] handle_pte_fault+0x4fc/0x760
[<00003173cc759212>] __handle_mm_fault+0x452/0xa00
[<00003173cc7599ba>] handle_mm_fault+0x1fa/0x6a0
[<00003173cc73409a>] __get_user_pages+0x4aa/0xba0
[<00003173cc7349e8>] get_user_pages_remote+0x258/0x770
[<000031734be6f052>] get_map_page+0xe2/0x190 [kvm]
[<000031734be6f910>] adapter_indicators_set+0x50/0x4a0 [kvm]
[<000031734be7f674>] set_adapter_int+0xc4/0x170 [kvm]
[<000031734be2f268>] kvm_set_irq+0x228/0x3f0 [kvm]
[<000031734be27000>] irqfd_inject+0xd0/0x150 [kvm]
[<00003173cc00c9ec>] process_one_work+0x87c/0x1490
[<00003173cc00dda6>] worker_thread+0x7a6/0x1010
[<00003173cc02dc36>] kthread+0x3b6/0x710
[<00003173cbed2f0c>] __ret_from_fork+0xdc/0x7f0
[<00003173cdd737ca>] ret_from_fork+0xa/0x30
3 locks held by kworker/6:2/549:
#0: 00000000800bc958 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x7ee/0x1490
#1: 000030f3d527fbd0 ((work_completion)(&irqfd->inject)){+.+.}-{0:0}, at: process_one_work+0x81c/0x1490
#2: 00000000f99862b0 (&mm->mmap_lock){++++}-{3:3}, at: get_map_page+0xa8/0x190 [kvm]
The "FAULT_FLAG_ALLOW_RETRY missing" indicates that handle_userfaultfd()
saw a page fault request without ALLOW_RETRY flag set, hence userfaultfd
cannot remotely resolve it (because the caller was asking for an immediate
resolution, aka, FAULT_FLAG_NOWAIT, while remote faults can take time).
With that, get_map_page() failed and the irq was lost.
We should not be strictly in an atomic environment here and the worker
should be sleepable (the call is done during an ioctl from userspace),
so we can allow adapter_indicators_set() to just sleep waiting for the
remote fault instead.
Link: https://issues.redhat.com/browse/RHEL-42486
Signed-off-by: Peter Xu <peterx@redhat.com>
[thuth: Assembled patch description and fixed some cosmetical issues]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: f65470661f ("KVM: s390/interrupt: do not pin adapter interrupt pages")
[frankja: Added fixes tag]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
for_each_set_bit() expects size to be in bits, not bytes. The abox mask
iteration uses bytes, but it works by coincidence, because the local
variable holding the mask is unsigned long, and the mask only ever has
bit 2 as the highest bit. Using a smaller type could lead to subtle and
very hard to track bugs.
Fixes: 62afef2811 ("drm/i915/rkl: RKL uses ABOX0 for pixel transfers")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org # v5.9+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250905104149.1144751-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 7ea3baa6ef)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Tariq Toukan says:
====================
Support exposing raw cycle counters in PTP and mlx5
This series by Carolina adds support in ptp and usage in mlx5 for
exposing the raw free-running cycle counter of PTP hardware clocks.
This is V2. Find previous one here:
https://lore.kernel.org/all/1752556533-39218-1-git-send-email-tariqt@nvidia.com/
Find detailed description by Carolina below [1].
[1]
This patch series introduces support for exposing the raw free-running
cycle counter of PTP hardware clocks. When the device is in free-running
mode, it emits timestamps as raw cycle values instead of nanoseconds.
These values may be passed directly to user space through:
- fwctl: exposes internal device event records that include raw
cycle-based timestamps.
- DPDK: retrieves CQEs that contain raw cycle counters, which are passed
to user space unmodified.
To address this, the series introduces two new ioctl commands that allow
userspace to query the device's raw cycle counter together with host
time:
- PTP_SYS_OFFSET_PRECISE_CYCLES
- PTP_SYS_OFFSET_EXTENDED_CYCLES
These commands work like their existing counterparts but return the
device timestamp in cycle units instead of real-time nanoseconds. This
allows user space to collect (cycle, time) pairs and build a mapping
between the device’s free-running clock and host time.
This can also be useful in the XDP fast path: if a driver inserts the
raw cycle value into metadata instead of a real-time timestamp, it can
avoid the overhead of converting cycles to time in the kernel. Then
userspace can resolve the cycle-to-time mapping using this ioctl when
needed.
The ioctl enables user space to correlate those with host time, without
requiring the PHC to be synchronized, so long as the drift remains
stable during collection.
Adds the new PTP ioctls and integrates support in ptp_ioctl():
- ptp: Add ioctl commands to expose raw cycle counter values
Support for exposing raw cycles in mlx5:
- net/mlx5: Extract MTCTR register read logic into helper function
- net/mlx5: Support getcyclesx and getcrosscycles
====================
Link: https://patch.msgid.link/1755008228-88881-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement the getcyclesx64 and getcrosscycles callbacks in ptp_info to
expose the device’s raw free-running counter.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1755008228-88881-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor the MTCTR register reading logic into a dedicated helper to
lay the groundwork for the next patch.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1755008228-88881-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce two new ioctl commands, PTP_SYS_OFFSET_PRECISE_CYCLES and
PTP_SYS_OFFSET_EXTENDED_CYCLES, to allow user space to access the
raw free-running cycle counter from PTP devices.
These ioctls are variants of the existing PRECISE and EXTENDED
offset queries, but instead of returning device time in realtime,
they return the raw cycle counter value.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/1755008228-88881-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The device power management API has the following asymmetry:
* dpm_suspend_start() does not clean up on failure
(it requires a call to dpm_resume_end())
* dpm_suspend_end() does clean up on failure
(it does not require a call to dpm_resume_start())
The asymmetry was introduced by commit d8f3de0d24 ("Suspend-related
patches for 2.6.27") in June 2008: It removed a call to device_resume()
from device_suspend() (which was later renamed to dpm_suspend_start()).
When Xen began using the device power management API in May 2008 with
commit 0e91398f2a ("xen: implement save/restore"), the asymmetry did
not yet exist. But since it was introduced, a call to dpm_resume_end()
is missing in the error path of dpm_suspend_start(). Fix it.
Fixes: d8f3de0d24 ("Suspend-related patches for 2.6.27")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v2.6.27
Reviewed-by: "Rafael J. Wysocki (Intel)" <rafael@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <22453676d1ddcebbe81641bb68ddf587fee7e21e.1756990799.git.lukas@wunner.de>
VIRQs come in 3 flavors, per-VPU, per-domain, and global, and the VIRQs
are tracked in per-cpu virq_to_irq arrays.
Per-domain and global VIRQs must be bound on CPU 0, and
bind_virq_to_irq() sets the per_cpu virq_to_irq at registration time
Later, the interrupt can migrate, and info->cpu is updated. When
calling __unbind_from_irq(), the per-cpu virq_to_irq is cleared for a
different cpu. If bind_virq_to_irq() is called again with CPU 0, the
stale irq is returned. There won't be any irq_info for the irq, so
things break.
Make xen_rebind_evtchn_to_cpu() update the per_cpu virq_to_irq mappings
to keep them update to date with the current cpu. This ensures the
correct virq_to_irq is cleared in __unbind_from_irq().
Fixes: e46cdb66c8 ("xen: event channels")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250828003604.8949-4-jason.andryuk@amd.com>
