Fix a permanent ACPI table memory leak in early_amd_iommu_init() when
CMPXCHG16B feature is not supported
Fixes: 82582f85ed ("iommu/amd: Disable AMD IOMMU if CMPXCHG16B feature is not supported")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20250822024915.673427-1-zhen.ni@easystack.cn
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
It is not necessary to include the header for the struct definition for an
"extern " declaration. It can simply be dropped from the headers to reduce
the number of includes the preprocessor has to process. If needed, it can
be added to the actual C source file.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The batadv_skb_crc32() helper was shared between Bridge Loop Avoidance and
Network Coding. With the removal of the network coding feature, it is
possible to just move this helper directly to Bridge Loop Avoidance.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The Network Coding feature, introduced in 2013, is based on the master
thesis "Inter-Flow Network Coding for Wireless Mesh Networks". It relies on
the assumption that neighboring mesh nodes can reliably overhear each
other's transmissions in promiscuous mode, allowing packets to be combined
to reduce forwarding overhead.
This assumption no longer holds for modern wireless mesh networks, which
are heterogeneous and make overhearing increasingly unreliable. Factors
such as multiple spatial streams, varying data rates, beamforming, and
OFDMA all prevent nodes from consistently overhearing each other. The current
implementation in batman-adv is not able to detect these conditions and would
require a more complex layer beyond its neighbor discovery process to do so.
In addition, the feature has been unmaintained for years and is discouraged
for use. None of the current maintainers have the required test
setup to verify its functionality, and known issues remain in its data
structures (reference counting, RCU usage, and cleanup handling). Its
continued presence also blocks necessary refactoring of the core originator
infrastructure.
Remove this obsolete and unmaintained feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Martin Hundebøll <martin@hundeboll.net>
Acked-by: Marek Lindner <marek.lindner@mailbox.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
This version will contain all the (major or even only minor) changes for
Linux 6.18.
The version number isn't a semantic version number with major and minor
information. It is just encoding the year of the expected publishing as
Linux -rc1 and the number of published versions this year (starting at 0).
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
RISC-V IO Mapping Table (RIMT) provides the information about the IOMMU
to the OS in ACPI. Add support for ACPI in RISC-V IOMMU drivers by using
RIMT data.
The changes at high level are,
a) Register the IOMMU with RIMT data structures.
b) Enable probing of platform IOMMU in ACPI way using the ACPIID defined
for the RISC-V IOMMU in the BRS spec [1]. Configure the MSI domain if
the platform IOMMU uses MSIs.
[1] - https://github.com/riscv-non-isa/riscv-brs/blob/main/acpi-id.adoc
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250818045807.763922-4-sunilvl@ventanamicro.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
acpi_iommu_configure_id() currently supports only IORT (ARM) and VIOT.
Add support for RISC-V as well.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250818045807.763922-3-sunilvl@ventanamicro.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
RISC-V IO Mapping Table (RIMT) is a static ACPI table to communicate
IOMMU information to the OS. The spec is available at [1].
The changes at high level are,
a) Initialize data structures required for IOMMU/device
configuration using the data from RIMT. Provide APIs required
for device configuration.
b) Provide an API for IOMMU drivers to register the
fwnode with RIMT data structures. This API will create a
fwnode for PCIe IOMMU.
[1] - https://github.com/riscv-non-isa/riscv-acpi-rimt
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250818045807.763922-2-sunilvl@ventanamicro.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Change the 'ret' variable from u32 to int to store negative error codes
or zero;
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly. Additionally, assigning negative error codes to
unsigned type may trigger a GCC warning when the -Wsign-conversion flag
is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250829140219.121783-1-rongqianfeng@vivo.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Introduce a DRM driver for the Mayqueen Pixpaper e-ink display panel,
which is controlled via SPI. The driver supports a 122x250 resolution
display with XRGB8888 format.
Also, add a MAINTAINERS entry for the Pixpaper driver.
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250902-drm-v5-3-d77c678c4ae3@gmail.com
The binding is for the Mayqueen Pixpaper e-ink display panel,
controlled via an SPI interface.
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250902-drm-v5-2-d77c678c4ae3@gmail.com
Mayqueen is a Taiwan-based company primarily focused on the development
of arm64 development boards and e-paper displays.
Signed-off-by: Wig Cheng <onlywig@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250902-drm-v5-1-d77c678c4ae3@gmail.com
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250905073712.3791260-1-nichen@iscas.ac.cn
These registers exist and at least on the t602x variant the IRQ only
clears when theses are cleared.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250826-dart-t8110-stream-error-v1-1-e33395112014@jannau.net
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
After a panic if SNP is enabled in the previous kernel then the kdump
kernel boots with IOMMU SNP enforcement still enabled.
IOMMU command buffers and event buffer registers remain locked and
exclusive to the previous kernel. Attempts to enable command and event
buffers in the kdump kernel will fail, as hardware ignores writes to
the locked MMIO registers as per AMD IOMMU spec Section 2.12.2.1.
Skip enabling command buffers and event buffers for kdump boot as they
are already enabled in the previous kernel.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/576445eb4f168b467b0fc789079b650ca7c5b037.1756157913.git.ashish.kalra@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Since SEV or SNP may already be initialized in the previous kernel,
attempting to initialize them again in the kdump kernel can result
in SNP initialization failures, which in turn lead to IOMMU
initialization failures. Moreover, SNP/SEV guests are not run under a
kdump kernel, so there is no need to initialize SEV or SNP during
kdump boot.
Skip SNP and SEV INIT if doing kdump boot.
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/d884eff5f6180d8b8c6698a6168988118cf9cba1.1756157913.git.ashish.kalra@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
After a panic if SNP is enabled in the previous kernel then the kdump
kernel boots with IOMMU SNP enforcement still enabled.
IOMMU device table register is locked and exclusive to the previous
kernel. Attempts to copy old device table from the previous kernel
fails in kdump kernel as hardware ignores writes to the locked device
table base address register as per AMD IOMMU spec Section 2.12.2.1.
This causes the IOMMU driver (OS) and the hardware to reference
different memory locations. As a result, the IOMMU hardware cannot
process the command which results in repeated "Completion-Wait loop
timed out" errors and a second kernel panic: "Kernel panic - not
syncing: timer doesn't work through Interrupt-remapped IO-APIC".
Reuse device table instead of copying device table in case of kdump
boot and remove all copying device table code.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/3a31036fb2f7323e6b1a1a1921ac777e9f7bdddc.1756157913.git.ashish.kalra@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
After a panic if SNP is enabled in the previous kernel then the kdump
kernel boots with IOMMU SNP enforcement still enabled.
IOMMU completion wait buffers (CWBs), command buffers and event buffer
registers remain locked and exclusive to the previous kernel. Attempts
to allocate and use new buffers in the kdump kernel fail, as hardware
ignores writes to the locked MMIO registers as per AMD IOMMU spec
Section 2.12.2.1.
This results in repeated "Completion-Wait loop timed out" errors and a
second kernel panic: "Kernel panic - not syncing: timer doesn't work
through Interrupt-remapped IO-APIC"
The list of MMIO registers locked and which ignore writes after failed
SNP shutdown are mentioned in the AMD IOMMU specifications below:
Section 2.12.2.1.
https://docs.amd.com/v/u/en-US/48882_3.10_PUB
Reuse the pages of the previous kernel for completion wait buffers,
command buffers, event buffers and memremap them during kdump boot
and essentially work with an already enabled IOMMU configuration and
re-using the previous kernel’s data structures.
Reusing of command buffers and event buffers is now done for kdump boot
irrespective of SNP being enabled during kdump.
Re-use of completion wait buffers is only done when SNP is enabled as
the exclusion base register is used for the completion wait buffer
(CWB) address only when SNP is enabled.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/ff04b381a8fe774b175c23c1a336b28bc1396511.1756157913.git.ashish.kalra@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
In xe_migrate_copy(), when copy_only_ccs is true, we only need two
emit_pte() calls one for the BO and one for the raw CCS storage.
However, the current implementation issues three emit_pte() calls,
resulting in an unnecessary PTE programming job.
This fix removes the redundant emit_pte() call to avoid programming
the same PTEs twice and reducing overhead during CCS-only migration.
v2: Preserve correct behavior on DG2, which requires both CCS and
page copies.
Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250904161423.2448727-1-sanjay.kumar.yadav@intel.com
The T8110 variant DART implementation on T602x SoCs indicates an IAS of
42, which requires an extra page table level. The extra level is
optional, but let's implement it.
Later it might be useful to restrict this based on the actual attached
devices, since most won't need that much address space anyway.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250821-apple-dart-4levels-v2-3-e39af79daa37@jannau.net
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
DARTs on t602x SoCs are of the t8110 variant but have an IAS of 42,
which means optional support for an extra page table level.
Refactor the PTE management to support an arbitrary level count, and
then calculate how many levels we need for any given configuration.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250821-apple-dart-4levels-v2-2-e39af79daa37@jannau.net
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The registers are 32-bit and the offsets definitely don't need 64 bits
either, these should've been u32s.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250821-apple-dart-4levels-v2-1-e39af79daa37@jannau.net
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Use the string choice helper function str_plural() to simplify the code.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Ankit Soni <Ankit.Soni@amd.com>
Link: https://lore.kernel.org/r/20250818070556.458271-1-zhao.xichao@vivo.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
skl_crtc_allocate_plane_ddb allow iter.data_rate to be zero
which could cause divide by zero in skl_allocate_plane_ddb,
check against that.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250905104626.1274147-3-juhapekka.heikkila@gmail.com
if __waitfor timeout, ret will have -ETIMEDOUT. Then if condition
was met, and read_ret will have error that's handled.
Then if ret was zero, read_ret was zero ksv_ready must have value.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250905104626.1274147-1-juhapekka.heikkila@gmail.com
Print the memory details even if the detection failed in some way
but we continued the driver initialization anyway. It'll be easier
to debug issues if we at least know what the final results were.
And while at it also print the number of PSF GV points. Previously
we only printed the QGV points.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250902133113.18778-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently the icl codepaths first determine the memory type from the
memory controller registers (via skl_get_dram_info()->skl_get_dram_type())
and then overwrite the results with icl_pcode_read_mem_global_info().
Get rid of the pointless (and potentially incorrect) skl_get_dram_type()
stuff.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250902133113.18778-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use consistent spelling when talking about the 16Gb DIMM w/a.
Even currently language is a bit off as the w/a is actually
about DIMMs with 16Gb DRAM devices on them, not the total capacity
of the whole DIMM. But this language does more or less match how
Bspec talks about this stuff.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250902133113.18778-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We are incorrectly applying the 16Gb DIMM w/a (adding 1 extra
usec to WM0 latency) on MTL+ even though the w/a is only needed
for SKL/ICL.
The current way of setting this is up is a bit of a disaster:
1. always set has_16gb_dimms=true for all platforms except BXT/GLK
2. has_16gb_dimms potentially gets overwritten with something else
* BXT/GLK don't do anything since we never set has_16gb_dimms to
begin with
* skl_get_dram_info() overwrites has_16gb_dimms with the actual
detection results for SKL/ICL/derivatives
* gen12_get_dram_info() (correctly) resets has_16gb_dimms
for TGL/ADL/derivatives
* xelpdp_get_dram_info() doesn't do anything, leaving
has_16gb_dimms incorrectly set for MTL+
Clean up the whole mess by only setting has_16gb_dimms in the
SKL/ICL codepaths where we have the actual detection code for
it. This avois applying the w/a incorrectly on MTL+.
v2: Rewrite commit msg (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250902133113.18778-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Set the MTP TC hotplug bits in the correct register.
Shouldn't matter really as this only gets used for eDP
detection and there should be never eDP on TC ports on
current hw.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250902153915.4423-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use correct multi-line kernel-doc style if required.
Some members were described only in the commit message.
Some other members were described using wrong names.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250904144026.7222-1-michal.wajdeczko@intel.com
During system resume the display power state verification will print the
"power well x state mismatch (refcount 0/enabled 1)"
error message from the early resume sequence for a power well left
enabled by BIOS. This power well was probably left enabled by BIOS
inadvertently, since BIOS versions on current platforms do not leave any
display output enabled while resuming from an Sx power state, hence the
enabled display power well is unused. In theory however it is possible
that BIOS leaves a display output enabled, in that case the enabled
power well shouldn't be reported as an error.
According to the above, remove the display power state verification from
the early resume phase to avoid incorrectly reporting an enabled power
well without a power reference as an error.
Note: The refcount for any enabled and used power well (i.e. used for an
enabled display output) will be acquired following the early resume
sequence, after the HW state for display outputs (encoder/crtc etc.) is
read out. Any power well enabled but not used (hence not holding a
reference) will be disabled after the HW state readout. The display
power state will be verified afterwards in intel_power_domains_enable().
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6012
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250903122152.2526050-1-imre.deak@intel.com
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Acked-by: Raphaël Gallais-Pou <rgallaispou@gmail.com>
Link: https://lore.kernel.org/r/20250904112738.350652-1-liaoyuanhong@vivo.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Pull MD fixes from Yu:
"- fix data loss for writemostly in raid1, by Yu Kuai;
- fix potentional data lost by skipping recovery, by Li Nan;"
* tag 'md-6.17-20250905' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md: prevent incorrect update of resync/recovery offset
md/raid1: fix data lost for writemostly rdev
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
queue_work() / queue_delayed_work() / mod_delayed_work() will now use the
new unbound wq: whether the user still use the old wq a warn will be
printed along with a wq redirect to the new one.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Message-ID: <20250905091016.109428-2-marco.crivellari@suse.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add check for the return value of devm_kmemdup() to prevent
potential null pointer dereference.
Fixes: 7561177017 ("ASoC: codecs: Add FourSemi FS2104/5S audio amplifier driver")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Message-ID: <20250905091845.1559-1-hanchunchao@inspur.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove xe_wa_test_exit() as it could crach the KUnit kernel in
case of hitting some asserts in xe_wa_test_init() as test->priv
could not be pointing to expected data.
| # xe_wa_gt: ASSERTION FAILED at drivers/gpu/drm/xe/tests/xe_wa_test.c:34
| Expected ret == 0, but
| ret == -19 (0xffffffffffffffed)
|Bus error - the host /dev/shm or /tmp mount likely just ran out of space
|Kernel panic - not syncing: Kernel mode signal 7
Note that there is no need to call drm_kunit_helper_free_device()
since our fake device allocated by drm_kunit_helper_alloc_device()
will be cleaned up automatically.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250829171922.572-7-michal.wajdeczko@intel.com
The list of all known representative platforms defined in xe_wa
could be used in more places by other test suites.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250829171922.572-6-michal.wajdeczko@intel.com
Custom struct platform_test_case definition in xe_wa is now almost
identical to generic struct xe_pci_fake_data defintiion except the
.name member, which could be generated by xe_pci_fake_data_desc().
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250829171922.572-5-michal.wajdeczko@intel.com
We already use struct xe_pci_fake_data to provide custom config of
the fake PCI device and soon we will be using this struct also as
direct parameter for the parameterized Xe KUnit tests.
Add function to generate description based on that config data.
For platform or subplatform name lookup pciidlist which already
have definitions of all supported platforms.
Examples:
TIGERLAKE
TIGERLAKE A0
TIGERLAKE SR-IOV PF
...
PANTHERLAKE 30.00(Xe3_LPG) 30.00(Xe3_LPM)
PANTHERLAKE 30.00(Xe3_LPG) A0 30.00(Xe3_LPM) A0
PANTHERLAKE 30.00(Xe3_LPG) A0 30.00(Xe3_LPM) A0 SR-IOV VF
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250829171922.572-4-michal.wajdeczko@intel.com
The struct xe_pci_fake_data has fields that specify graphics and
media stepping of the fake PCI device used during KUnit testing.
Change definitions of those separate step fields and use existing
struct xe_step_info definition that already have required fields.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250829171922.572-3-michal.wajdeczko@intel.com
In upcoming patch we will want to replace lookup code during the
test to relax the strict match that we use in production.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250829171922.572-2-michal.wajdeczko@intel.com
Since the dma-resv is shared we don't need to reserve and add a fence
slot fence twice, plus no need to loop through the dependencies.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250829164715.720735-2-matthew.auld@intel.com
We now use the same notifier lock for SVM and userptr, with that we can
combine xe_pt_userptr_pre_commit and xe_pt_svm_pre_commit.
v2: (Matt B)
- Re-use xe_svm_notifier_lock/unlock for userptr.
- Combine svm/userptr handling further down into op_check_svm_userptr.
v3:
- Only hide the ops if we lack DRM_GPUSVM, since we also need them for
userptr.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250828142430.615826-18-matthew.auld@intel.com
