-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declarations to the end of the corresponding
structures. Notice that `struct dev_pagemap` is a flexible structure,
this is a structure that contains a flexible-array member.
struct dev_pagemap always has room for at least one range. amdgpu only
uses a single range. Therefore no change are needed to the allocation
of struct amdgpu_device.
Fix 283 of the following type of warnings:
283 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h:111:28: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
strncpy is deprecated for use on NUL-terminated strings, as indicated in
Documentation/process/deprecated.rst. strncpy NUL-pads the destination
buffer and doesn't guarantee the destination buffer will be NUL
terminated.
Signed-off-by: James Flowers <bold.zone2373@fastmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20250901030512.80099-1-bold.zone2373@fastmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add PCS inband capabilities for XLG in the Marvell PP2 driver, so
phylink knows that 5G and 10G speeds have no inband capabilities.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/E1uslR9-00000001OxL-44CD@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add quirk for a copper SFP that identifies itself as "FLYPRO"
"SFP-10GT-CS-30M". It uses RollBall protocol to talk to the PHY.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250831105910.3174-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the implementation of use_carrier, the link monitoring
method that utilizes ethtool or ioctl to determine the link state of an
interface in a bond. Bonding will always behaves as if use_carrier=1,
which relies on netif_carrier_ok() to determine the link state of
interfaces.
To avoid acquiring RTNL many times per second, bonding inspects
link state under RCU, but not under RTNL. However, ethtool
implementations in drivers may sleep, and therefore this strategy is
unsuitable for use with calls into driver ethtool functions.
The use_carrier option was introduced in 2003, to provide
backwards compatibility for network device drivers that did not support
the then-new netif_carrier_ok/on/off system. Device drivers are now
expected to support netif_carrier_*, and the use_carrier backwards
compatibility logic is no longer necessary.
The option itself remains, but when queried always returns 1,
and may only be set to 1.
Link: https://lore.kernel.org/000000000000eb54bf061cfd666a@google.com
Link: https://lore.kernel.org/20240718122017.d2e33aaac43a.I10ab9c9ded97163aef4e4de10985cd8f7de60d28@changeid
Signed-off-by: Jay Vosburgh <jv@jvosburgh.net>
Reported-by: syzbot+b8c48ea38ca27d150063@syzkaller.appspotmail.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/2029487.1756512517@famine
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are platforms already have a maximum dump size of 12KB, to avoid
data truncating, increase GuC crash dump buffer size to 16KB.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250829160427.1245732-1-zhanjun.dong@intel.com
A collection of small changes including a few regression fixes.
- Regression fix for Intel SKL/KBL HD-audio bindings
- Regression fix for missing Nvidia HDMI codec entries after the
recent code reorganization
- A few TAS2781 codec regression fixes
- Fix for ASoC component lookup breakage
- Usual HD-audio, USB-audio and SOF quirk entries
-----BEGIN PGP SIGNATURE-----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=5tbZ
-----END PGP SIGNATURE-----
Merge tag 'sound-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small changes including a few regression fixes:
- Regression fix for Intel SKL/KBL HD-audio bindings
- Regression fix for missing Nvidia HDMI codec entries after the
recent code reorganization
- A few TAS2781 codec regression fixes
- Fix for ASoC component lookup breakage
- Usual HD-audio, USB-audio and SOF quirk entries"
* tag 'sound-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Add pin fix for another HP EliteDesk 800 G4 model
ALSA: usb-audio: Allow Focusrite devices to use low samplerates
ALSA: hda: tas2781: reorder tas2563 calibration variables
ALSA: hda: tas2781: fix tas2563 EFI data endianness
ALSA: firewire-motu: drop EPOLLOUT from poll return values as write is not supported
ALSA: docs: Add documents for recently changes in snd-usb-audio
ALSA: usb-audio: Add mute TLV for playback volumes on more devices
ASoC: SOF: Intel: WCL: Add the sdw_process_wakeen op
ALSA: hda: Avoid binding with SOF for SKL/KBL platforms
ASoC: rsnd: tidyup direction name on rsnd_dai_connect()
ALSA: hda/tas2781: Fix EFI name for calibration beginning with 1 instead of 0
ALSA: usb-audio: move mixer_quirks' min_mute into common quirk
ALSA: hda/realtek: Fix headset mic for TongFang X6[AF]R5xxY
ALSA: hda/hdmi: Restore missing HDMI codec entries
ASoC: codecs: idt821034: fix wrong log in idt821034_chip_direction_output()
ASoC: soc-core: tidyup snd_soc_lookup_component_nolocked()
ASoC: soc-core: care NULL dirver name on snd_soc_lookup_component_nolocked()
ALSA: hda: intel-dsp-config: Select SOF driver on MTL Chromebooks
ALSA: usb-audio: Add mute TLV for playback volumes on some devices
or aren't considered necessary for -stable kernels. 11 of these fixes are
for MM.
This includes a three-patch series from Harry Yoo which fixes an
intermittent boot failure which can occur on x86 systems. And a two-patch
series from Alexander Gordeev which fixes a KASAN crash on S390 systems.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaLY4WAAKCRDdBJ7gKXxA
jp2qAP92JCCzscR87um+YSc4u6a/X6ucYWkzh9BGhM8bMT8p7wD/UhIuGbYRFLPw
XbSDkAD6lKpujQkRAudRFQTcZcU7gwg=
=mPUd
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-09-01-17-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes. 13 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 11 of these
fixes are for MM.
This includes a three-patch series from Harry Yoo which fixes an
intermittent boot failure which can occur on x86 systems. And a
two-patch series from Alexander Gordeev which fixes a KASAN crash on
S390 systems"
* tag 'mm-hotfixes-stable-2025-09-01-17-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: fix possible deadlock in kmemleak
x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings()
mm: introduce and use {pgd,p4d}_populate_kernel()
mm: move page table sync declarations to linux/pgtable.h
proc: fix missing pde_set_flags() for net proc files
mm: fix accounting of memmap pages
mm/damon/core: prevent unnecessary overflow in damos_set_effective_quota()
kexec: add KEXEC_FILE_NO_CMA as a legal flag
kasan: fix GCC mem-intrinsic prefix with sw tags
mm/kasan: avoid lazy MMU mode hazards
mm/kasan: fix vmalloc shadow memory (de-)population races
kunit: kasan_test: disable fortify string checker on kasan_strings() test
selftests/mm: fix FORCE_READ to read input value correctly
mm/userfaultfd: fix kmap_local LIFO ordering for CONFIG_HIGHPTE
ocfs2: prevent release journal inode after journal shutdown
rust: mm: mark VmaNew as transparent
of_numa: fix uninitialized memory nodes causing kernel panic
Let's split IPU writes in hot data area to improve the GC efficiency.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It can slowdown annotation browser if objdump is processing large DWARF
data. Let's add a hashmap to save the data type info for each line.
Note that this is needed for TUI only because stdio only processes each
line once. TUI will display the same line whenever it refreshes the
screen.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250816031635.25318-13-namhyung@kernel.org
[ Add lines around an if block and use zfree() in one case, acked by Namhyung ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=fL6z
-----END PGP SIGNATURE-----
Merge tag 'for-6.17-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix a few races related to inode link count
- fix inode leak on failure to add link to inode
- move transaction aborts closer to where they happen
* tag 'for-6.17-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: avoid load/store tearing races when checking if an inode was logged
btrfs: fix race between setting last_dir_index_offset and inode logging
btrfs: fix race between logging inode and checking if it was logged before
btrfs: simplify error handling logic for btrfs_link()
btrfs: fix inode leak on failure to add link to inode
btrfs: abort transaction on failure to add link to inode
Currently the kzalloc failure check just sets reports the failure
and sets the variable ret to -ENOMEM, which is not checked later
for this specific error. Fix this by just returning -ENOMEM rather
than setting ret.
Fixes: 4fb9307154 ("drm/amd/amdgpu: remove redundant host to psp cmd buf allocations")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They are part of a power state too and should be printed
alongside the rest of the data from the power state.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These fields were only used by si_dpm and are not necessary
anymore. They also may have been incorrect because:
- wm_high was set to the LOW_WATERMARK field of watermark A.
- wm_low was not set on DCE 6 and was always zero.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port of commit 227545b9a0 ("drm/radeon/dpm: Disable sclk
switching on Oland when two 4K 60Hz monitors are connected")
This is an ad-hoc DPM fix, necessary because we don't have
proper bandwidth calculation for DCE 6.
We define "high pixelclock" for SI as higher than necessary
for 4K 30Hz. For example, 4K 60Hz and 1080p 144Hz fall into
this category.
When two high pixel clock displays are connected to Oland,
additionally disable shader clock switching, which results in
a higher voltage, thereby addressing some visible flickering.
v2:
Add more comments.
v3:
Split into two commits for easier review.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
According to pp_pm_compute_clocks the non-DC display code
has "issues with mclk switching with refresh rates over 120 hz".
The workaround is to disable MCLK switching in this case.
Do the same for legacy DPM.
Fixes: 6ddbd37f10 ("drm/amd/pm: optimize the amdgpu_pm_compute_clocks() implementations")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some parts of the code base expect that MCLK switching is turned
off when the vblank time is set to zero.
According to pp_pm_compute_clocks the non-DC code has issues
with MCLK switching with refresh rates over 120 Hz.
v3:
Add code comment to explain this better.
Add an if statement instead of changing the switch_limit.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Based on some comments in dm_pp_display_configuration
above the crtc_index and line_time fields, these values
are programmed to the SMC to work around an SMC hang
when it switches MCLK.
According to Alex, the Windows driver programs them to:
mclk_change_block_cp_min = 200 / line_time
mclk_change_block_cp_max = 100 / line_time
Let's use the same for the sake of consistency.
Previously we used the watermark values, but it seemed buggy
as the code was mixing up low/high and A/B watermarks, and
was not saving a low watermark value on DCE 6, so
mclk_change_block_cp_max would be always zero previously.
Split this change off from the previous si_upload_smc_data
to make it easier to bisect, in case it causes any issues.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The si_upload_smc_data function uses si_write_smc_soft_register
to set some register values in the SMC, and expects the result
to be PPSMC_Result_OK which is 1.
The PPSMC_Result_OK / PPSMC_Result_Failed values are used for
checking the result of a command sent to the SMC.
However, the si_write_smc_soft_register actually doesn't send
any commands to the SMC and returns zero on success,
so this check was incorrect.
Fix that by not checking the return value, just like other
calls to si_write_smc_soft_register.
v3:
Additionally, when no display is plugged in, there is no need
to restrict MCLK switching, so program the registers to zero.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SMC can take an excessive amount of time to process some
messages under some conditions.
Background:
Sending a message to the SMC works by writing the message into
the mmSMC_MESSAGE_0 register and its optional parameter into
the mmSMC_SCRATCH0, and then polling mmSMC_RESP_0. Previously
the timeout was AMDGPU_MAX_USEC_TIMEOUT, ie. 100 ms.
Increase the timeout to 200 ms for all messages and to 1 sec for
a few messages which I've observed to be especially slow:
PPSMC_MSG_NoForcedLevel
PPSMC_MSG_SetEnabledLevels
PPSMC_MSG_SetForcedLevels
PPSMC_MSG_DisableULV
PPSMC_MSG_SwitchToSwState
This fixes the following problems on Tahiti when switching
from a lower clock power state to a higher clock state, such
as when DC turns on a display which was previously turned off.
* si_restrict_performance_levels_before_switch would fail
(if the user previously forced high clocks using sysfs)
* si_set_sw_state would fail (always)
It turns out that both of those failures were SMC timeouts and
that the SMC actually didn't fail or hang, just needs more time
to process those.
Add a warning when there is an SMC timeout to make it easier to
identify this type of problem in the future.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always send PPSMC_MSG_DisableULV to the SMC, even if ULV mode
is unsupported, to make sure it is properly turned off.
v3:
Simplify si_disable_ulv further.
Always check the return value of amdgpu_si_send_msg_to_smc.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unlike later versions, UVD 3 has firmware validation.
For this to work, the UVD should be powered up correctly.
When DPM is enabled and the display clock is off,
the SMU may choose a power state which doesn't power
the UVD, which can result in failure to initialize UVD.
v2:
Add code comments to explain about the UVD power state
and how UVD clock is turned on/off.
Fixes: b38f3e80ec ("drm amdgpu: SI UVD v3_1 (v2)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The kfd CRIU checkpoint ioctl would return an error if trying
to checkpoint a process with no kfd buffer objects.
This is a normal case and should not be an error.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new GEM_OP_IOCTL option GET_MAPPING_INFO, which
returns a list of mappings associated with a given bo, along with
their positions and offsets.
Userspace for this and the previous change can be found at:
https://github.com/checkpoint-restore/criu/pull/2613
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new ioctl DRM_IOCTL_AMDGPU_GEM_LIST_HANDLES.
This ioctl returns a list of bos with their handles, sizes,
and flags and domains.
This ioctl is meant to be used during CRIU checkpoint and
provide information needed to reconstruct the bos
in CRIU restore.
Userspace for this and the next change can be found at
https://github.com/checkpoint-restore/criu/pull/2613
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GEM create flag AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE
specifies that gem memory contains sensitive information and
should be cleared to prevent snooping.
The COHERENT and UNCACHED gem create flags enable memory
features related to sharing memory across devices.
For CRIU we need to re-create KFD BOs through the
GEM_CREATE IOCTL, so allow those KFD specific flags here as well.
This will also aid us in the future and allows to move
the KFD components over using the render node for allocations.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I recently ran into an issue where the PI generated using the block layer
integrity code differs from that from a kernel using the PRACT fallback
when the block layer integrity code is disabled, and I tracked this down
to us using PRACT incorrectly.
The NVM Command Set Specification (section 5.33 in 1.2, similar in older
versions) specifies the PRACT insert behavior as:
Inserted protection information consists of the computed CRC for the
protection information format (refer to section 5.3.1) in the Guard
field, the LBAT field value in the Application Tag field, the LBST
field value in the Storage Tag field, if defined, and the computed
reference tag in the Logical Block Reference Tag.
Where the computed reference tag is defined as following for type 1 and
type 2 using the text below that is duplicated in the respective bullet
points:
the value of the computed reference tag for the first logical block of
the command is the value contained in the Initial Logical Block
Reference Tag (ILBRT) or Expected Initial Logical Block Reference Tag
(EILBRT) field in the command, and the computed reference tag is
incremented for each subsequent logical block.
So we need to set ILBRT field, but we currently don't. Interestingly
this works fine on my older type 1 formatted SSD, but Qemu trips up on
this. We already set ILBRT for Write Same since commit aeb7bb061be5
("nvme: set the PRACT bit when using Write Zeroes with T10 PI").
To ease this, move the PI type check into nvme_set_ref_tag.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
There is a race condition between inode eviction and inode caching that
can cause a live struct btrfs_inode to be missing from the root->inodes
xarray. Specifically, there is a window during evict() between the inode
being unhashed and deleted from the xarray. If btrfs_iget() is called
for the same inode in that window, it will be recreated and inserted
into the xarray, but then eviction will delete the new entry, leaving
nothing in the xarray:
Thread 1 Thread 2
---------------------------------------------------------------
evict()
remove_inode_hash()
btrfs_iget_path()
btrfs_iget_locked()
btrfs_read_locked_inode()
btrfs_add_inode_to_root()
destroy_inode()
btrfs_destroy_inode()
btrfs_del_inode_from_root()
__xa_erase
In turn, this can cause issues for subvolume deletion. Specifically, if
an inode is in this lost state, and all other inodes are evicted, then
btrfs_del_inode_from_root() will call btrfs_add_dead_root() prematurely.
If the lost inode has a delayed_node attached to it, then when
btrfs_clean_one_deleted_snapshot() calls btrfs_kill_all_delayed_nodes(),
it will loop forever because the delayed_nodes xarray will never become
empty (unless memory pressure forces the inode out). We saw this
manifest as soft lockups in production.
Fix it by only deleting the xarray entry if it matches the given inode
(using __xa_cmpxchg()).
Fixes: 310b2f5d5a ("btrfs: use an xarray to track open inodes in a root")
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Co-authored-by: Leo Martins <loemra.dev@gmail.com>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With 64K page size (aarch64 with 64K page size config) and 4K btrfs
block size, the following workload can easily lead to a corrupted read:
mkfs.btrfs -f -s 4k $dev > /dev/null
mount -o compress $dev $mnt
xfs_io -f -c "pwrite -S 0xff 0 64k" $mnt/base > /dev/null
echo "correct result:"
od -Ad -t x1 $mnt/base
xfs_io -f -c "reflink $mnt/base 32k 0 32k" \
-c "reflink $mnt/base 0 32k 32k" \
-c "pwrite -S 0xff 60k 4k" $mnt/new > /dev/null
echo "incorrect result:"
od -Ad -t x1 $mnt/new
umount $mnt
This shows the following result:
correct result:
0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0065536
incorrect result:
0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0032768 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0061440 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0065536
Notice the zero in the range [32K, 60K), which is incorrect.
[CAUSE]
With extra trace printk, it shows the following events during od:
(some unrelated info removed like CPU and context)
od-3457 btrfs_do_readpage: enter r/i=5/258 folio=0(65536) prev_em_start=0000000000000000
The "r/i" is indicating the root and inode number. In our case the file
"new" is using ino 258 from fs tree (root 5).
Here notice the @prev_em_start pointer is NULL. This means the
btrfs_do_readpage() is called from btrfs_read_folio(), not from
btrfs_readahead().
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=0 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=4096 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=8192 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=12288 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=16384 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=20480 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=24576 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=28672 got em start=0 len=32768
These above 32K blocks will be read from the first half of the
compressed data extent.
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=32768 got em start=32768 len=32768
Note here there is no btrfs_submit_compressed_read() call. Which is
incorrect now.
Although both extent maps at 0 and 32K are pointing to the same compressed
data, their offsets are different thus can not be merged into the same
read.
So this means the compressed data read merge check is doing something
wrong.
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=36864 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=40960 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=45056 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=49152 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=53248 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=57344 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=61440 skip uptodate
od-3457 btrfs_submit_compressed_read: cb orig_bio: file off=0 len=61440
The function btrfs_submit_compressed_read() is only called at the end of
folio read. The compressed bio will only have an extent map of range [0,
32K), but the original bio passed in is for the whole 64K folio.
This will cause the decompression part to only fill the first 32K,
leaving the rest untouched (aka, filled with zero).
This incorrect compressed read merge leads to the above data corruption.
There were similar problems that happened in the past, commit 808f80b467
("Btrfs: update fix for read corruption of compressed and shared
extents") is doing pretty much the same fix for readahead.
But that's back to 2015, where btrfs still only supports bs (block size)
== ps (page size) cases.
This means btrfs_do_readpage() only needs to handle a folio which
contains exactly one block.
Only btrfs_readahead() can lead to a read covering multiple blocks.
Thus only btrfs_readahead() passes a non-NULL @prev_em_start pointer.
With v5.15 kernel btrfs introduced bs < ps support. This breaks the above
assumption that a folio can only contain one block.
Now btrfs_read_folio() can also read multiple blocks in one go.
But btrfs_read_folio() doesn't pass a @prev_em_start pointer, thus the
existing bio force submission check will never be triggered.
In theory, this can also happen for btrfs with large folios, but since
large folio is still experimental, we don't need to bother it, thus only
bs < ps support is affected for now.
[FIX]
Instead of passing @prev_em_start to do the proper compressed extent
check, introduce one new member, btrfs_bio_ctrl::last_em_start, so that
the existing bio force submission logic will always be triggered.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The compression level is meaningless for lzo, but before commit
3f093ccb95 ("btrfs: harden parsing of compression mount options"),
it was silently ignored if passed.
After that commit, passing a level with lzo fails to mount:
BTRFS error: unrecognized compression value lzo:1
It seems reasonable for users to expect that lzo would permit a numeric
level option, as all the other algos do, even though the kernel's
implementation of LZO currently only supports a single level. Because it
has always worked to pass a level, it seems likely to me that users in
the real world are relying on doing so.
This patch restores the old behavior, giving "lzo:N" the same semantics
as all of the other compression algos.
To be clear, silly variants like "lzo:one", "lzo:the_first_option", or
"lzo:armageddon" also used to work. This isn't meant to suggest that
any possible mis-interpretation of mount options that once worked must
continue to work forever. This is an exceptional case where it makes
sense to preserve compatibility, both because the mis-interpretation is
reasonable, and because nothing tangible is sacrificed.
Finally update btrfs_show_options() to ignore the level of LZO, as it
is only the default level without any extra meaning.
Fixes: 3f093ccb95 ("btrfs: harden parsing of compression mount options")
Reviewed-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following workload on a squota enabled fs:
btrfs subvol create mnt/subvol
# ensure subvol extents get accounted
sync
btrfs qgroup create 1/1 mnt
btrfs qgroup assign mnt/subvol 1/1 mnt
btrfs qgroup delete mnt/subvol
# make the cleaner thread run
btrfs filesystem sync mnt
sleep 1
btrfs filesystem sync mnt
btrfs qgroup destroy 1/1 mnt
will fail with EBUSY. The reason is that 1/1 does the quick accounting
when we assign subvol to it, gaining its exclusive usage as excl and
excl_cmpr. But then when we delete subvol, the decrement happens via
record_squota_delta() which does not update excl_cmpr, as squotas does
not make any distinction between compressed and normal extents. Thus,
we increment excl_cmpr but never decrement it, and are unable to delete
1/1. The two possible fixes are to make squota always mirror excl and
excl_cmpr or to make the fast accounting separately track the plain and
cmpr numbers. The latter felt cleaner to me so that is what I opted for.
Fixes: 1e0e9d5771 ("btrfs: add helper for recording simple quota deltas")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix a possible heap overflow in e1000_set_eeprom function by adding
input validation for the requested length of the change in the EEPROM.
In addition, change the variable type from int to size_t for better
code practices and rearrange declarations to RCT.
Cc: stable@vger.kernel.org
Fixes: bc7f75fa97 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Co-developed-by: Mikael Wessel <post@mikaelkw.online>
Signed-off-by: Mikael Wessel <post@mikaelkw.online>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
incorrectly used ixgbe_lp_map in loops intended to populate the
supported and advertised EEE linkmode bitmaps based on ixgbe_ls_map.
This results in incorrect bit setting and potential out-of-bounds
access, since ixgbe_lp_map and ixgbe_ls_map have different sizes
and purposes.
ixgbe_lp_map[i] -> ixgbe_ls_map[i]
Use ixgbe_ls_map for supported and advertised linkmodes, and keep
ixgbe_lp_map usage only for link partner (lp_advertised) mapping.
Fixes: 9356b6db9d ("net: ethernet: ixgbe: Convert EEE to use linkmodes")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
list_first_entry() never returns NULL - if the list is empty, it still
returns a pointer to an invalid object, leading to potential invalid
memory access when dereferenced.
Fix this by using list_first_entry_or_null instead of list_first_entry.
Fixes: e3219ce6a7 ("i40e: Add support for client interface for IWARP driver")
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The 'command' and 'netdev_ops' debugfs files are a legacy debugging
interface supported by the i40e driver since its early days by commit
02e9c29081 ("i40e: debugfs interface").
Both of these debugfs files provide a read handler which is mostly useless,
and which is implemented with questionable logic. They both use a static
256 byte buffer which is initialized to the empty string. In the case of
the 'command' file this buffer is literally never used and simply wastes
space. In the case of the 'netdev_ops' file, the last command written is
saved here.
On read, the files contents are presented as the name of the device
followed by a colon and then the contents of their respective static
buffer. For 'command' this will always be "<device>: ". For 'netdev_ops',
this will be "<device>: <last command written>". But note the buffer is
shared between all devices operated by this module. At best, it is mostly
meaningless information, and at worse it could be accessed simultaneously
as there doesn't appear to be any locking mechanism.
We have also recently received multiple reports for both read functions
about their use of snprintf and potential overflow that could result in
reading arbitrary kernel memory. For the 'command' file, this is definitely
impossible, since the static buffer is always zero and never written to.
For the 'netdev_ops' file, it does appear to be possible, if the user
carefully crafts the command input, it will be copied into the buffer,
which could be large enough to cause snprintf to truncate, which then
causes the copy_to_user to read beyond the length of the buffer allocated
by kzalloc.
A minimal fix would be to replace snprintf() with scnprintf() which would
cap the return to the number of bytes written, preventing an overflow. A
more involved fix would be to drop the mostly useless static buffers,
saving 512 bytes and modifying the read functions to stop needing those as
input.
Instead, lets just completely drop the read access to these files. These
are debug interfaces exposed as part of debugfs, and I don't believe that
dropping read access will break any script, as the provided output is
pretty useless. You can find the netdev name through other more standard
interfaces, and the 'netdev_ops' interface can easily result in garbage if
you issue simultaneous writes to multiple devices at once.
In order to properly remove the i40e_dbg_netdev_ops_buf, we need to
refactor its write function to avoid using the static buffer. Instead, use
the same logic as the i40e_dbg_command_write, with an allocated buffer.
Update the code to use this instead of the static buffer, and ensure we
free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on
multiple devices, and allows us to remove the now unused static buffer
along with removing the read access.
Fixes: 02e9c29081 ("i40e: debugfs interface")
Reported-by: Kunwu Chan <chentao@kylinos.cn>
Closes: https://lore.kernel.org/intel-wired-lan/20231208031950.47410-1-chentao@kylinos.cn/
Reported-by: Wang Haoran <haoranwangsec@gmail.com>
Closes: https://lore.kernel.org/all/CANZ3JQRRiOdtfQJoP9QM=6LS1Jto8PGBGw6y7-TL=BcnzHQn1Q@mail.gmail.com/
Reported-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com>
Closes: https://lore.kernel.org/all/20250722115017.206969-1-a.jahangirzad@gmail.com/
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kunwu Chan <kunwu.chan@linux.dev>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
On control planes that allow changing the MAC address of the interface,
the driver must provide a MAC type to avoid errors such as:
idpf 0000:0a:00.0: Transaction failed (op 535)
idpf 0000:0a:00.0: Received invalid MAC filter payload (op 535) (len 0)
idpf 0000:0a:00.0: Transaction failed (op 536)
These errors occur during driver load or when changing the MAC via:
ip link set <iface> address <mac>
Add logic to set the MAC type when sending ADD/DEL (opcodes 535/536) to
the control plane. Since only one primary MAC is supported per vport, the
driver only needs to send an ADD opcode when setting it. Remove the old
address by calling __idpf_del_mac_filter(), which skips the message and
just clears the entry from the internal list. This avoids an error on DEL
as it attempts to remove an address already cleared by the preceding ADD
opcode.
Fixes: ce1b75d063 ("idpf: add ptypes and MAC filter support")
Reported-by: Jian Liu <jianliu@redhat.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Recent versions of the E810 firmware have support for an extra interrupt to
handle report of the "low latency" Tx timestamps coming from the
specialized low latency firmware interface. Instead of polling the
registers, software can wait until the low latency interrupt is fired.
This logic makes use of the Tx timestamp tracking structure, ice_ptp_tx, as
it uses the same "ready" bitmap to track which Tx timestamps complete.
Unfortunately, the ice_ll_ts_intr() function does not check if the
tracker is initialized before its first access. This results in NULL
dereference or use-after-free bugs similar to the issues fixed in the
ice_ptp_ts_irq() function.
Fix this by only checking the in_use bitmap (and other fields) if the
tracker is marked as initialized. The reset flow will clear the init field
under lock before it tears the tracker down, thus preventing any
use-after-free or NULL access.
Fixes: 82e71b226e ("ice: Enable SW interrupt from FW for LL TS")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The E810 device has support for a "low latency" firmware interface to
access and read the Tx timestamps. This interface does not use the standard
Tx timestamp logic, due to the latency overhead of proxying sideband
command requests over the firmware AdminQ.
The logic still makes use of the Tx timestamp tracking structure,
ice_ptp_tx, as it uses the same "ready" bitmap to track which Tx
timestamps complete.
Unfortunately, the ice_ptp_ts_irq() function does not check if the tracker
is initialized before its first access. This results in NULL dereference or
use-after-free bugs similar to the following:
[245977.278756] BUG: kernel NULL pointer dereference, address: 0000000000000000
[245977.278774] RIP: 0010:_find_first_bit+0x19/0x40
[245977.278796] Call Trace:
[245977.278809] ? ice_misc_intr+0x364/0x380 [ice]
This can occur if a Tx timestamp interrupt races with the driver reset
logic.
Fix this by only checking the in_use bitmap (and other fields) if the
tracker is marked as initialized. The reset flow will clear the init field
under lock before it tears the tracker down, thus preventing any
use-after-free or NULL access.
Fixes: f9472aaabd ("ice: Process TSYN IRQ in a separate function")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
CCS save/restore is supported starting with GuC 70.48.0 (compatibility
version 1.23.0). Gate the feature on the GuC firmware version and keep it
disabled on older or unsupported versions.
Fixes: f3009272ff ("drm/xe/vf: Create contexts for CCS read write")
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250902103256.21658-2-satyanarayana.k.v.p@intel.com
The bridge has three bootstrap pins which are sampled to determine the
frequency of the external reference clock. The driver will also
(over)write that setting. But it seems this is racy after the bridge is
enabled. It was observed that although the driver write the correct
value (by sniffing on the I2C bus), the register has the wrong value.
The datasheet states that the GPIO lines have to be stable for at least
5us after asserting the EN signal. Thus, there seems to be some logic
which samples the GPIO lines and this logic appears to overwrite the
register value which was set by the driver. Waiting 20us after
asserting the EN line resolves this issue.
Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250821122341.1257286-1-mwalle@kernel.org
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Minor bug fixes for a couple of older devices reported by some users.
Mostly this centers around the automatic PLL configuration getting the
wrong values due to rounding.
Both tracing_mark_write and tracing_mark_raw_write call
__copy_from_user_inatomic during preempt_disable. But in some case,
__copy_from_user_inatomic may trigger page fault, and will call schedule()
subtly. And if a task is migrated to other cpu, the following warning will
be trigger:
if (RB_WARN_ON(cpu_buffer,
!local_read(&cpu_buffer->committing)))
An example can illustrate this issue:
process flow CPU
---------------------------------------------------------------------
tracing_mark_raw_write(): cpu:0
...
ring_buffer_lock_reserve(): cpu:0
...
cpu = raw_smp_processor_id() cpu:0
cpu_buffer = buffer->buffers[cpu] cpu:0
...
...
__copy_from_user_inatomic(): cpu:0
...
# page fault
do_mem_abort(): cpu:0
...
# Call schedule
schedule() cpu:0
...
# the task schedule to cpu1
__buffer_unlock_commit(): cpu:1
...
ring_buffer_unlock_commit(): cpu:1
...
cpu = raw_smp_processor_id() cpu:1
cpu_buffer = buffer->buffers[cpu] cpu:1
As shown above, the process will acquire cpuid twice and the return values
are not the same.
To fix this problem using copy_from_user_nofault instead of
__copy_from_user_inatomic, as the former performs 'access_ok' before
copying.
Link: https://lore.kernel.org/20250819105152.2766363-1-luogengkun@huaweicloud.com
Fixes: 656c7f0d2d ("tracing: Replace kmap with copy_from_user() in trace_marker writing")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit 16f5dfbc85 ("gfp: include __GFP_NOWARN in GFP_NOWAIT")
made GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT
(e.g., `GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean
up these redundant flags across subsystems.
No functional changes.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250805023630.335719-1-rongqianfeng@vivo.com
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Adjust symbol matching logic to account for Control-flow Enforcement
Technology (CET) on x86_64 systems. CET prefixes functions with
a 4-byte 'endbr' instruction, shifting the actual hook entry point to
symbol + 4.
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <qmo@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250829061107.23905-3-chenyuan_fl@163.com
Extract the kernel configuration file parsing logic from feature.c into
a new read_kernel_config() function in common.c. This includes:
1. Moving the config file handling and option parsing code
2. Adding required headers and struct definition
3. Keeping all existing functionality
The refactoring enables sharing this logic with other components while
maintaining current behavior. This will be used by subsequent patches
that need to check kernel config options.
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <qmo@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250829061107.23905-2-chenyuan_fl@163.com
Instead of using static variable flat_state_cnt to pass data between
functions involved in the _LPI information processing, pass the current
number of "flattened" idle states to flatten_lpi_states() and make it
return the updated number of those states. At the same time, use a
local variable called state_count to store the number of "flattened"
idle states found so far in acpi_processor_get_lpi_info().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: lihuisong@huawei.com
Link: https://patch.msgid.link/10715991.nUPlyArG6x@rafael.j.wysocki
Add a new module import namespace called ACPI_PROCESSOR_IDLE for
functions exported from the non-modular part of the ACPI processor
driver to the modular part of it.
Export acpi_processor_claim_cst_control() and acpi_processor_evaluate_cst()
in that namespace to hide them from unrelated modules.
They are also used by the intel_idle driver, but it is non-modular,
so it can call them regardless of the way the symbols are exported.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3376499.aeNJFYEL58@rafael.j.wysocki
