Document the bindings for STM32MP25 PCIe Controller configured in
root complex mode with one root port.
Supports 4 INTx and MSI interrupts from the ARM GICv2m controller.
STM32 PCIe may be in a power domain which is the case for the STM32MP25
based boards.
Supports WAKE# from wake-gpios
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250820075411.1178729-4-christian.bruel@foss.st.com
If a platform requires an initial pinctrl state during probing, this
helper function provides the client with access to the same initial
state.
eg:
xxx_suspend_noirq
...
pinctrl_pm_select_sleep_state
xxx resume_noirq
pinctrl_pm_select_init_state
...
pinctrl_pm_select_default_state
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250820075411.1178729-3-christian.bruel@foss.st.com
Clarify documentation for predefined standard state names 'default',
'init', 'sleep', 'idle' and their associated PM API.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250820075411.1178729-2-christian.bruel@foss.st.com
The pci_endpoint_test tests the entire MSI/MSI-X range, which generates
false errors on platforms that do not support the whole range.
Skip the test in such cases and report accordingly.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250804170916.3212221-4-christian.bruel@foss.st.com
The pci_endpoint_test tests the 32-bit MSI range. However, the device might
not have all vectors configured. For example, if msi_interrupts is 8 in the
ep function space or if the MSI Multiple Message Capable value is
configured as 4 (maximum 16 vectors).
In this case, do not attempt to run the test to avoid timeouts and directly
return the error value.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250804170916.3212221-2-christian.bruel@foss.st.com
A bug reported by one of my customers that EFI name beginning with 0
instead of 1.
Fixes: 4fe2385134 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250827043404.644-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DTS example in the bindings should be indented with 2- or 4-spaces, so
correct a mixture of different styles to keep consistent 4-spaces.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250818142138.129327-2-krzysztof.kozlowski@linaro.org
This is slightly tricky, since the VFS uses non-zeroing allocation to
preserve some fields that are left in a consistent state.
Reported-by: Chunsheng Luo <luochunsheng@ustc.edu>
Closes: https://lore.kernel.org/all/20250818083224.229-1-luochunsheng@ustc.edu/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The 'inode' parameter in fuse_passthrough_open() is never referenced
in the function implementation.
Signed-off-by: Chunsheng Luo <luochunsheng@ustc.edu>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The original commit be2ff42c5d ("fuse: Use hash table to link
processing request") converted fuse_pqueue->processing to a hash table,
but virtio_fs_enqueue_req() was not updated to use it correctly.
So use fuse_pqueue->processing as a hash table, this make the code
more coherent
Co-developed-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There are no users of BDI_CAP_WRITEBACK_ACCT now that fuse doesn't do
its own writeback accounting. This commit removes
BDI_CAP_WRITEBACK_ACCT.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
commit 0c58a97f91 ("fuse: remove tmp folio for writebacks and internal
rb tree") removed temp folios for dirty page writeback. Consequently,
fuse can now use the default writeback accounting.
With switching fuse to use default writeback accounting, there are some
added benefits. This updates wb->writeback_inodes tracking as well now
and updates writeback throughput estimates after writeback completion.
This commit also removes inc_wb_stat() and dec_wb_stat(). These have no
callers anymore now that fuse does not call them.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Since clear_bit is an atomic operation, the spinlock is redundant and
can be removed, reducing lock contention is good for performance.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With the change in aee03ea7ff98 ("fuse: support large folios for
writethrough writes"), this old line for setting ap->descs[0].offset is
now obsolete and unneeded. This should have been removed as part of
aee03ea7ff98.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Fixes: aee03ea7ff98 ("fuse: support large folios for writethrough writes")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use freezable wait in fuse_get_req() so that it won't block
the system from entering suspend:
Freezing user space processes failed after 20.009 seconds
Call trace:
__switch_to+0xcc/0x168
schedule+0x57c/0x1138
fuse_get_req+0xd0/0x2b0
fuse_simple_request+0x120/0x620
fuse_getxattr+0xe4/0x158
fuse_xattr_get+0x2c/0x48
__vfs_getxattr+0x160/0x1d8
get_vfs_caps_from_disk+0x74/0x1a8
__audit_inode+0x244/0x4d8
user_path_at_empty+0x2e0/0x390
__arm64_sys_faccessat+0xdc/0x260
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
All four FUSE docs are currently in upper-level
Documentation/filesystems/ directory, but these are distinct as a group
of its own. Move them into Documentation/filesystems/fuse/ subdirectory.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch add a simple functional test for the "abort" file
in fusectlfs (/sys/fs/fuse/connections/ID/abort).
A simple fuse daemon is added for testing.
Related discussion can be found in the link below.
Link: https://lore.kernel.org/all/CAOQ4uxjKFXOKQxPpxtS6G_nR0tpw95w0GiO68UcWg_OBhmSY=Q@mail.gmail.com/
Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
As I preparing patches adding selftests for fusectl,
I notice that documentation of max_background and congestion_threshold
is missing.
This patch add some descriptions about these two files.
Cc: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The FUSE protocol uses struct fuse_write_out to convey the return value of
copy_file_range, which is restricted to uint32_t. But the COPY_FILE_RANGE
interface supports a 64-bit size copies and there's no reason why copies
should be limited to 32-bit.
Introduce a new op COPY_FILE_RANGE_64, which is identical, except the
number of bytes copied is returned in a 64-bit value.
If the fuse server does not support COPY_FILE_RANGE_64, fall back to
COPY_FILE_RANGE.
Reported-by: Florian Weimer <fweimer@redhat.com>
Closes: https://lore.kernel.org/all/lhuh5ynl8z5.fsf@oldenburg.str.redhat.com/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Starting with commit f99508074e ("PM: domains: Detach on
device_unbind_cleanup()"), there is no longer a need to call
dev_pm_domain_detach() in the bus remove function. The
device_unbind_cleanup() function now handles this to avoid
invoking devres cleanup handlers while the PM domain is
powered off, which could otherwise lead to failures as
described in the above-mentioned commit.
Drop the explicit dev_pm_domain_detach() call and rely instead
on the flags passed to dev_pm_domain_attach() to power off the
domain.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250827101236.927313-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The helper registration return value is passed-through by module_init
callbacks which modprobe confuses with the harmless -EEXIST returned
when trying to load an already loaded module.
Make sure modprobe fails so users notice their helper has not been
registered and won't work.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Fixes: 12f7a50533 ("netfilter: add user-space connection tracking helper infrastructure")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
When send a broadcast packet to a tap device, which was added to a bridge,
br_nf_local_in() is called to confirm the conntrack. If another conntrack
with the same hash value is added to the hash table, which can be
triggered by a normal packet to a non-bridge device, the below warning
may happen.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 96 at net/bridge/br_netfilter_hooks.c:632 br_nf_local_in+0x168/0x200
CPU: 1 UID: 0 PID: 96 Comm: tap_send Not tainted 6.17.0-rc2-dirty #44 PREEMPT(voluntary)
RIP: 0010:br_nf_local_in+0x168/0x200
Call Trace:
<TASK>
nf_hook_slow+0x3e/0xf0
br_pass_frame_up+0x103/0x180
br_handle_frame_finish+0x2de/0x5b0
br_nf_hook_thresh+0xc0/0x120
br_nf_pre_routing_finish+0x168/0x3a0
br_nf_pre_routing+0x237/0x5e0
br_handle_frame+0x1ec/0x3c0
__netif_receive_skb_core+0x225/0x1210
__netif_receive_skb_one_core+0x37/0xa0
netif_receive_skb+0x36/0x160
tun_get_user+0xa54/0x10c0
tun_chr_write_iter+0x65/0xb0
vfs_write+0x305/0x410
ksys_write+0x60/0xd0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
---[ end trace 0000000000000000 ]---
To solve the hash conflict, nf_ct_resolve_clash() try to merge the
conntracks, and update skb->_nfct. However, br_nf_local_in() still use the
old ct from local variable 'nfct' after confirm(), which leads to this
warning.
If confirm() does not insert the conntrack entry and return NF_DROP, the
warning may also occur. There is no need to reserve the WARN_ON_ONCE, just
remove it.
Link: https://lore.kernel.org/netdev/20250820043329.2902014-1-wangliang74@huawei.com/
Fixes: 62e7151ae3 ("netfilter: bridge: confirm multicast packets before passing them up the stack")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Prior to the topology parsing rewrite and the switchover to the new parsing
logic for AMD processors in
c749ce393b ("x86/cpu: Use common topology code for AMD"),
the initial_apicid on these platforms was:
- First initialized to the LocalApicId from CPUID leaf 0x1 EBX[31:24].
- Then overwritten by the ExtendedLocalApicId in CPUID leaf 0xb
EDX[31:0] on processors that supported topoext.
With the new parsing flow introduced in
f7fb3b2dd9 ("x86/cpu: Provide an AMD/HYGON specific topology parser"),
parse_8000_001e() now unconditionally overwrites the initial_apicid already
parsed during cpu_parse_topology_ext().
Although this has not been a problem on baremetal platforms, on virtualized AMD
guests that feature more than 255 cores, QEMU zeros out the CPUID leaf
0x8000001e on CPUs with CoreID > 255 to prevent collision of these IDs in
EBX[7:0] which can only represent a maximum of 255 cores [1].
This results in the following FW_BUG being logged when booting a guest
with more than 255 cores:
[Firmware Bug]: CPU 512: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0200
AMD64 Architecture Programmer's Manual Volume 2: System Programming Pub.
24593 Rev. 3.42 [2] Section 16.12 "x2APIC_ID" mentions the Extended
Enumeration leaf 0xb (Fn0000_000B_EDX[31:0])(which was later superseded by the
extended leaf 0x80000026) provides the full x2APIC ID under all circumstances
unlike the one reported by CPUID leaf 0x8000001e EAX which depends on the mode
in which APIC is configured.
Rely on the APIC ID parsed during cpu_parse_topology_ext() from CPUID leaf
0x80000026 or 0xb and only use the APIC ID from leaf 0x8000001e if
cpu_parse_topology_ext() failed (has_topoext is false).
On platforms that support the 0xb leaf (Zen2 or later, AMD guests on
QEMU) or the extended leaf 0x80000026 (Zen4 or later), the
initial_apicid is now set to the value parsed from EDX[31:0].
On older AMD/Hygon platforms that do not support the 0xb leaf but support the
TOPOEXT extension (families 0x15, 0x16, 0x17[Zen1], and Hygon), retain current
behavior where the initial_apicid is set using the 0x8000001e leaf.
Issue debugged by Naveen N Rao (AMD) <naveen@kernel.org> and Sairaj Kodilkar
<sarunkod@amd.com>.
[ bp: Massage commit message. ]
Fixes: c749ce393b ("x86/cpu: Use common topology code for AMD")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Naveen N Rao (AMD) <naveen@kernel.org>
Cc: stable@vger.kernel.org
Link: 35ac5dfbca [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 [2]
Link: https://lore.kernel.org/20250825075732.10694-2-kprateek.nayak@amd.com
Since stations are recreated from scratch, all lists that wcids are added
to must be cleared before calling ieee80211_restart_hw.
Set wcid->sta = 0 for each wcid entry in order to ensure that they are
not added again before they are ready.
Fixes: 8a55712d12 ("wifi: mt76: mt7915: enable full system reset support")
Link: https://patch.msgid.link/20250827085352.51636-4-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Non-station wcid entries must not be passed to the rx functions.
In case of the global wcid entry, it could even lead to corruption in the wcid
array due to pointer being casted to struct mt7996_sta_link using container_of.
Fixes: 7464b12b7d ("wifi: mt76: mt7996: rework mt7996_rx_get_wcid to support MLO")
Link: https://patch.msgid.link/20250827085352.51636-3-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When a wcid can't be found, link_sta can be stale from a previous batch.
The code currently assumes that if link_sta is set, wcid is also non-zero.
Fix wcid NULL pointer dereference by resetting link_sta when a wcid entry
can't be found.
Fixes: 62da647a2b ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()")
Link: https://patch.msgid.link/20250827085352.51636-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Avoid leaking beacons on unrelated channels during scanning/roc
Fixes: c56d6edebc ("wifi: mt76: mt7996: use emulated hardware scan support")
Reported-by: Chad Monroe <chad.monroe@adtran.com>
Link: https://patch.msgid.link/20250813121106.81559-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Only put probe request packets in the offchannel queue if
IEEE80211_TX_CTRL_DONT_USE_RATE_MASK is set and IEEE80211_TX_CTL_TX_OFFCHAN
is unset.
Fixes: 0b3be9d1d3 ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Reported-by: Chad Monroe <chad.monroe@adtran.com>
Link: https://patch.msgid.link/20250813121106.81559-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Return early in mt7925_mcu_sta_eht_mld_tlv() for non-MLD vifs to avoid bogus
MLD TLVs, and pass the proper connection state to sta_basic TLV.
Cc: stable@vger.kernel.org
Fixes: cb1353ef34 ("wifi: mt76: mt7925: integrate *mlo_sta_cmd and *sta_cmd")
Reported-by: Tal Inbar <inbartdev@gmail.com>
Tested-by: Tal Inbar <inbartdev@gmail.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250818030201.997940-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
MT7925 is a connac3 device; using the connac2 helper mis-parses
TXWI and breaks AMPDU/BA accounting. Use the connac3-specific
helper mt7925_tx_check_aggr() instead,
Cc: stable@vger.kernel.org
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Reported-by: Nick Morrow <morrownr@gmail.com>
Tested-by: Nick Morrow <morrownr@gmail.com>
Tested-on: Netgear A9000 USB WiFi adapter
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250818020203.992338-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When station mode, don't disconnect when we get
channel switch from AP to DFS channel. Most APs
send CSA request after pass background CAC. In other
case we should disconnect after detect beacon miss.
Without patch when we get CSA to DFS channel get:
"kernel: wlo1: preparing for channel switch failed, disconnecting"
Fixes: 8aa2f59260 ("wifi: mt76: mt7921: introduce CSA support")
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Link: https://patch.msgid.link/20250716165443.28354-1-janusz.dziedzic@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
A new warning in clang [1] points out a couple of places where a hdr
variable is not initialized then passed along to skb_put_data().
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:1894:21: warning: variable 'hdr' is uninitialized when passed as a const pointer argument here [-Wuninitialized-const-pointer]
1894 | skb_put_data(skb, &hdr, sizeof(hdr));
| ^~~
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:3386:21: warning: variable 'hdr' is uninitialized when passed as a const pointer argument here [-Wuninitialized-const-pointer]
3386 | skb_put_data(skb, &hdr, sizeof(hdr));
| ^~~
Zero initialize these headers as done in other places in the driver when
there is nothing stored in the header.
Cc: stable@vger.kernel.org
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Link: 00dacf8c22 [1]
Closes: https://github.com/ClangBuiltLinux/linux/issues/2104
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20250715-mt7996-fix-uninit-const-pointer-v1-1-b5d8d11d7b78@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add support for host userspace mapping of guest_memfd-backed memory for VM
types that do NOT use support KVM_MEMORY_ATTRIBUTE_PRIVATE (which isn't
precisely the same thing as CoCo VMs, since x86's SEV-MEM and SEV-ES have
no way to detect private vs. shared).
mmap() support paves the way for several evolving KVM use cases:
* Allows VMMs like Firecracker to run guests entirely backed by
guest_memfd [1]. This provides a unified memory management model for
both confidential and non-confidential guests, simplifying VMM design.
* Enhanced Security via direct map removal: When combined with Patrick's
series for direct map removal [2], this provides additional hardening
against Spectre-like transient execution attacks by eliminating the
need for host kernel direct maps of guest memory.
* Lays the groundwork for *restricted* mmap() support for guest_memfd-backed
memory on CoCo platforms [3] that permit in-place sharing of guest memory
with the host.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a guest_memfd testcase to verify that a vCPU can fault-in guest_memfd
memory that supports mmap(), but that is not currently mapped into host
userspace and/or has a userspace address (in the memslot) that points at
something other than the target guest_memfd range. Mapping guest_memfd
memory into the guest is supposed to operate completely independently from
any userspace mappings.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-25-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expand the guest_memfd selftests to comprehensively test host userspace
mmap functionality for guest_memfd-backed memory when supported by the
VM type.
Introduce new test cases to verify the following:
* Successful mmap operations: Ensure that MAP_SHARED mappings succeed
when guest_memfd mmap is enabled.
* Data integrity: Validate that data written to the mmap'd region is
correctly persistent and readable.
* fallocate interaction: Test that fallocate(FALLOC_FL_PUNCH_HOLE)
correctly zeros out mapped pages.
* Out-of-bounds access: Verify that accessing memory beyond the
guest_memfd's size correctly triggers a SIGBUS signal.
* Unsupported mmap: Confirm that mmap attempts fail as expected when
guest_memfd mmap support is not enabled for the specific guest_memfd
instance or VM type.
* Flag validity: Introduce test_vm_type_gmem_flag_validity() to
systematically test that only allowed guest_memfd creation flags are
accepted for different VM types (e.g., GUEST_MEMFD_FLAG_MMAP for
default VMs, no flags for CoCo VMs).
The existing tests for guest_memfd creation (multiple instances, invalid
sizes), file read/write, file size, and invalid punch hole operations
are integrated into the new test_with_type() framework to allow testing
across different VM types.
Cc: James Houghton <jthoughton@google.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Shivank Garg <shivankg@amd.com>
Co-developed-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-24-seanjc@google.com>
[Fix default vm_types to use BIT() - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update the guest_memfd_test selftest to use getpagesize() instead of
hardcoded 4KB page size values.
Using hardcoded page sizes can cause test failures on architectures or
systems configured with larger page sizes, such as arm64 with 64KB
pages. By dynamically querying the system's page size, the test becomes
more portable and robust across different environments.
Additionally, build the guest_memfd_test selftest for arm64.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Suggested-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-23-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all the x86 and arm64 plumbing for mmap() on guest_memfd is in
place, allow userspace to set GUEST_MEMFD_FLAG_MMAP and advertise support
via a new capability, KVM_CAP_GUEST_MEMFD_MMAP.
The availability of this capability is determined per architecture, and
its enablement for a specific guest_memfd instance is controlled by the
GUEST_MEMFD_FLAG_MMAP flag at creation time.
Update the KVM API documentation to detail the KVM_CAP_GUEST_MEMFD_MMAP
capability, the associated GUEST_MEMFD_FLAG_MMAP, and provide essential
information regarding support for mmap in guest_memfd.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-22-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
