Marking ufence as signalled after copy_to_user() is too late.
Worker thread which signals ufence by memory write might be raced
with another userspace vm-bind call. In map/unmap scenario unmap
may still see ufence is not signalled causing -EBUSY. Change the
order of marking / write to user-fence fixes this issue.
Fixes: 977e5b82e0 ("drm/xe: Expose user fence from xe_sync_entry")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5536
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250820083903.2109891-2-zbigniew.kempczynski@intel.com
(cherry picked from commit 8ae04fe9ff)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add a debugfs fault handler to trigger csc error handler that
wedges the device and enables runtime survivability mode.
v2: add debugfs only for bmg (Umesh)
v3: do not use csc_fault attribute if debugfs is not enabled
v4: rebase
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250826063419.3022216-11-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add support to handle CSC firmware reported errors. When CSC firmware
errors are encoutered, a error interrupt is received by the GFX device as
a MSI interrupt.
Device Source control registers indicates the source of the error as CSC
The HEC error status register indicates that the error is firmware reported
Depending on the type of error, the error cause is written to the HEC
Firmware error register.
On encountering such CSC firmware errors, the graphics device is
non-recoverable from driver context. The only way to recover from these
errors is firmware flash.
System admin/userspace is notified of the necessity of firmware flash
with a combination of vendor-specific drm device edged uevent, dmesg logs
and runtime survivability sysfs. It is the responsiblity of the consumer
to verify all the actions and then trigger a firmware flash using tools
like fwupd.
$ udevadm monitor --property --kernel
monitor will print the received events for:
KERNEL - the kernel uevent
KERNEL[754.709341] change /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:01.0/0000:03:00.0/drm/card0 (drm)
ACTION=change
DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:01.0/0000:03:00.0/drm/card0
SUBSYSTEM=drm
WEDGED=vendor-specific
DEVNAME=/dev/dri/card0
DEVTYPE=drm_minor
SEQNUM=5973
MAJOR=226
MINOR=0
Logs
xe 0000:03:00.0: [drm] *ERROR* [Hardware Error]: Tile0 reported NONFATAL error 0x20000
xe 0000:03:00.0: [drm] *ERROR* [Hardware Error]: NONFATAL: HEC Uncorrected FW FD Corruption error reported, bit[2] is set
xe 0000:03:00.0: Runtime Survivability mode enabled
xe 0000:03:00.0: [drm] *ERROR* CRITICAL: Xe has declared device 0000:03:00.0 as wedged.
IOCTLs and executions are blocked. Only a rebind may clear the failure
Please file a _new_ bug report at https://gitlab.freedesktop.org/drm/xe/kernel/issues/new
xe 0000:03:00.0: [drm] device wedged, needs recovery
xe 0000:03:00.0: Firmware flash required, Please refer to the userspace documentation for more details!
Runtime survivability Sysfs:
/sys/bus/pci/devices/<device>/survivability_mode
v2: use vendor recovery method with
runtime survivability (Christian, Rodrigo, Raag)
v3: move declare wedged to runtime survivability mode (Rodrigo)
v4: update commit message
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/r/20250826063419.3022216-10-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Gfx device reports two classes of errors: uncorrectable and
correctable. Depending on the severity uncorrectable errors are further
classified Non-Fatal and Fatal.
Correctable and Non-Fatal errors: These errors are reported as MSI. Bits in
the Master Interrupt Register indicate the class of the error.
The source of the error is then read from the Device Error Source
Register.
Fatal errors: These are reported as PCIe errors
When a PCIe error is asserted, the OS will perform a SBR (Secondary
Bus reset) which causes the driver to reload. The error registers are
sticky and the values are maintained through SBR.
Add basic support to handle these errors.
Bspec: 50875, 53073, 53074, 53075, 53076
v2: Format commit message (Umesh)
v3: fix documentation (Stuart)
Cc: Stuart Summers <stuart.summers@intel.com>
Co-developed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/r/20250826063419.3022216-9-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Certain runtime firmware errors can cause the device to be in a unusable
state requiring a firmware flash to restore normal operation.
Runtime Survivability Mode indicates firmware flash is necessary by
wedging the device and exposing survivability mode sysfs.
The below sysfs is an indication that device is in survivability mode
/sys/bus/pci/devices/<device>/survivability_mode
v2: Fix kernel-doc (Umesh)
v3: Add user friendly dmesg (Frank)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250826063419.3022216-7-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add a helper function to set recovery method. The recovery
method can be set before declaring the device wedged and sending the
drm wedged uevent. If no method is set, default unbind/re-bind method
will be set.
v2: fix documentation (Raag)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250826063419.3022216-5-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Userspace should be notified after setting the device as wedged.
Re-order function calls to set gt wedged before sending uevent.
Cc: Matthew Brost <matthew.brost@intel.com>
Suggested-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826063419.3022216-4-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Address the need for a recovery method (firmware flash on Firmware errors)
introduced in the later patches of Xe KMD.
Whenever XE KMD detects a firmware error, a firmware flash is required to
recover the device to normal operation.
The initial proposal to use 'firmware-flash' as a recovery method was
not applicable to other drivers and could cause multiple recovery
methods specific to vendors to be added.
To address this a more generic 'vendor-specific' method is introduced,
guiding users to refer to vendor specific documentation and system logs
for detailed vendor specific recovery procedure.
Add a recovery method 'WEDGED=vendor-specific' for such errors.
Vendors must provide additional recovery documentation if this method
is used.
It is the responsibility of the consumer to refer to the correct vendor
specific documentation and usecase before attempting a recovery.
For example: If driver is XE KMD, the consumer must refer
to the documentation of 'Device Wedging' under 'Documentation/gpu/xe/'.
v2: fix documentation (Raag)
v3: add more details to commit message (Sima, Rodrigo, Raag)
add an example script to the documentation (Raag)
v4: use consistent naming (Raag)
v5: fix commit message
v6: add more documentation
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250826063419.3022216-3-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add documentation for Xe Device Wedging so that
file can be referenced in following patches.
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250826063419.3022216-2-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The DTS code coding style expects exactly one space around '='
character.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250821083213.46642-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Introduce documentation regarding use of software nodes to describe
GPIOs on legacy boards that have not been converted to device tree.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/tnaaz2qlk5jpbonfle7uy7pb54qx6ixwuczfbkwtxxwpj7hwas@y7a2rwko3k6c
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The API documenation of setup_mm_hdr does not mention that dptr can be
NULL, this is a local function, and no caller passes NULL. So drop the
unneeded check.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
No caller ever evaluates what we return in 'ret'. They only use the
return code of the function.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When we are low on memory or when the internal API is violated, we
cannot return EFI_OUT_OF_RESOURCES. According to the UEFI standard, that
error code is either related to persistent storage used for the variable
or even not foreseen as possible error (GetVariable e.g.). Use the not
fully accurate but compliant error code EFI_DEVICE_ERROR in those cases.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The communication buffer allocated by setup_mm_hdr() is later on passed
to tee_shm_register_kernel_buf(). The latter expects those buffers to be
contiguous pages, but setup_mm_hdr() just uses kmalloc(). That can cause
various corruptions or BUGs, specifically since commit 9aec2fb0fd
("slab: allocate frozen pages"), though it was broken before as well.
Fix this by using alloc_pages_exact() instead of kmalloc().
Fixes: c44b6be62e ("efi: Add tee-based EFI variable driver")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Currently the S1G capability element is not taken into account
for the scan_ies_len, which leads to a buffer length validation
failure in ieee80211_prep_hw_scan() and subsequent WARN in
__ieee80211_start_scan(). This prevents hw scanning from functioning.
To fix ensure we accommodate for the S1G capability length.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250826085437.3493-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
`config.{arch}` had entries already present in `config`.
When generating the config used by vmtest, concatenate the `config` file
with the `config.{arch}` one, making those entries duplicated, so remove
those duplications.
Use the following command to get the differences:
$ comm -1 -2 <(sort tools/testing/selftests/bpf/config.x86_64) <(sort tools/testing/selftests/bpf/config)
$ comm -1 -2 <(sort tools/testing/selftests/bpf/config.aarch64) <(sort tools/testing/selftests/bpf/config)
$ comm -1 -2 <(sort tools/testing/selftests/bpf/config.riscv64) <(sort tools/testing/selftests/bpf/config)
$ comm -1 -2 <(sort tools/testing/selftests/bpf/config.ppc64el) <(sort tools/testing/selftests/bpf/config)
$ comm -1 -2 <(sort tools/testing/selftests/bpf/config.s390x) <(sort tools/testing/selftests/bpf/config)
This is similar with commit 7a42af4b94 ("selftests/bpf: Remove entries
from config.s390x already present in config").
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250826065057.11415-1-yangtiezhu@loongson.cn
The variable ret is declared as a u32 type, but it is assigned a value
of -EOPNOTSUPP. Since unsigned types cannot correctly represent negative
values, the type of ret should be changed to int.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://patch.msgid.link/20250825022911.139377-1-liaoyuanhong@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The brcmf_btcoex_detach() only shuts down the btcoex timer, if the
flag timer_on is false. However, the brcmf_btcoex_timerfunc(), which
runs as timer handler, sets timer_on to false. This creates critical
race conditions:
1.If brcmf_btcoex_detach() is called while brcmf_btcoex_timerfunc()
is executing, it may observe timer_on as false and skip the call to
timer_shutdown_sync().
2.The brcmf_btcoex_timerfunc() may then reschedule the brcmf_btcoex_info
worker after the cancel_work_sync() has been executed, resulting in
use-after-free bugs.
The use-after-free bugs occur in two distinct scenarios, depending on
the timing of when the brcmf_btcoex_info struct is freed relative to
the execution of its worker thread.
Scenario 1: Freed before the worker is scheduled
The brcmf_btcoex_info is deallocated before the worker is scheduled.
A race condition can occur when schedule_work(&bt_local->work) is
called after the target memory has been freed. The sequence of events
is detailed below:
CPU0 | CPU1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... |
kfree(cfg->btcoex); // FREE |
| schedule_work(&bt_local->work); // USE
Scenario 2: Freed after the worker is scheduled
The brcmf_btcoex_info is freed after the worker has been scheduled
but before or during its execution. In this case, statements within
the brcmf_btcoex_handler() — such as the container_of macro and
subsequent dereferences of the brcmf_btcoex_info object will cause
a use-after-free access. The following timeline illustrates this
scenario:
CPU0 | CPU1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... | schedule_work(); // Reschedule
|
kfree(cfg->btcoex); // FREE | brcmf_btcoex_handler() // Worker
/* | btci = container_of(....); // USE
The kfree() above could | ...
also occur at any point | btci-> // USE
during the worker's execution|
*/ |
To resolve the race conditions, drop the conditional check and call
timer_shutdown_sync() directly. It can deactivate the timer reliably,
regardless of its current state. Once stopped, the timer_on state is
then set to false.
Fixes: 61730d4dff ("brcmfmac: support critical protocol API for DHCP")
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/20250822050839.4413-1-duoming@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Compile-testing this driver on Arm platforms shows a link failure
when the CRC functions are not part of the kernel:
x86_64-linux-ld: drivers/net/wireless/ralink/rt2x00/rt2800lib.o: in function `rt2800_check_firmware':
rt2800lib.c:(.text+0x20e5): undefined reference to `crc_ccitt'
Move the select statement to the correct Kconfig symbol to match
the call site.
Fixes: 311b05e235 ("wifi: rt2x00: add COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20250731075837.1969136-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Device can be unbound, so driver must also release memory for the wakeup
source. Do not use devm interface, because it would change the order of
cleanup.
Link: https://lore.kernel.org/lkml/20250501-device-wakeup-leak-extcon-v2-1-7af77802cbea@linaro.org/
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The Legion Go features detachable controllers which support a dual
dinput mode. In this mode, the controllers appear under a single HID
device with two applications.
Currently, both controllers appear under the same event device, causing
their controls to be mixed up. This patch separates the two so that
they can be used independently.
In addition, the latest firmware update for the Legion Go swaps the IDs
to the ones used by the Legion Go 2, so add those IDs as well.
[jkosina@suse.com: improved shortlog]
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
On regular fuse filesystems, i_blkbits is set to PAGE_SHIFT which means
any iomap partial writes will mark the entire folio as uptodate. However
fuseblk filesystems work differently and allow the blocksize to be less
than the page size. As such, this may lead to data corruption if fuseblk
sets its blocksize to less than the page size, uses the writeback cache,
and does a partial write, then a read and the read happens before the
write has undergone writeback, since the folio will not be marked
uptodate from the partial write so the read will read in the entire
folio from disk, which will overwrite the partial write.
The long-term solution for this, which will also be needed for fuse to
enable large folios with the writeback cache on, is to have fuse also
use iomap for folio reads, but until that is done, the cleanest
workaround is to use the page size for fuseblk's internal kernel inode
blksize/blkbits values while maintaining current behavior for stat().
This was verified using ntfs-3g:
$ sudo mkfs.ntfs -f -c 512 /dev/vdd1
$ sudo ntfs-3g /dev/vdd1 ~/fuseblk
$ stat ~/fuseblk/hi.txt
IO Block: 512
Fixes: a4c9ab1d49 ("fuse: use iomap for buffered writes")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
As pointed out by Miklos[1], in the fuse_update_get_attr() path, the
attributes returned to stat may be cached values instead of fresh ones
fetched from the server. In the case where the server returned a
modified blocksize value, we need to cache it and reflect it back to
stat if values are not re-fetched since we now no longer directly change
inode->i_blkbits.
Link: https://lore.kernel.org/linux-fsdevel/CAJfpeguCOxeVX88_zPd1hqziB_C+tmfuDhZP5qO2nKmnb-dTUA@mail.gmail.com/ [1]
Fixes: 542ede096e ("fuse: keep inode->i_blkbits constant")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The FUSE protocol uses struct fuse_write_out to convey the return value of
copy_file_range, which is restricted to uint32_t. But the COPY_FILE_RANGE
interface supports a 64-bit size copies.
Currently the number of bytes copied is silently truncated to 32-bit, which
may result in poor performance or even failure to copy in case of
truncation to zero.
Reported-by: Florian Weimer <fweimer@redhat.com>
Closes: https://lore.kernel.org/all/lhuh5ynl8z5.fsf@oldenburg.str.redhat.com/
Fixes: 88bc7d5097 ("fuse: add support for copy_file_range()")
Cc: <stable@vger.kernel.org> # v4.20
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Just like write(), copy_file_range() should check if the return value is
less or equal to the requested number of bytes.
Reported-by: Chunsheng Luo <luochunsheng@ustc.edu>
Closes: https://lore.kernel.org/all/20250807062425.694-1-luochunsheng@ustc.edu/
Fixes: 88bc7d5097 ("fuse: add support for copy_file_range()")
Cc: <stable@vger.kernel.org> # v4.20
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We do not support passthrough operations other than read/write on
regular file, so allowing non-regular backing files makes no sense.
Fixes: efad7153bf ("fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN")
Cc: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The DT2DRBK trackball has 8 buttons, but the report descriptor only
specifies 5. This patch adds the device ID and performs a similar fixup as
for other ELECOM devices to enable the remaining 3 buttons.
Signed-off-by: Martin Hilgendorf <martin.hilgendorf@posteo.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Update Altera-PIO Driver maintainer from <mun.yew.tham@intel.com> to
<adrianhoyin.ng@altera.com> as Mun Yew is no longer with Altera.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Acked-by: Mun Yew Tham <mun.yew.tham@intel.com>
Link: https://lore.kernel.org/r/20250825071637.40441-1-adrianhoyin.ng@altera.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is a redundant semicolon after a comment, remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
timbgpio_irq_type() currently accepts offset == ngpio, violating
gpiolib's [0..ngpio-1] contract. This can lead to undefined behavior
when computing '1 << offset', and it is also inconsistent with users
that iterate with for_each_set_bit(..., ngpio).
Tighten the upper bound to reject offset == ngpio. No functional change
for in-range offsets.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Link: https://lore.kernel.org/r/20250825090850.127163-1-junjie.cao@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Move mxs-pinctrl part into gpio-mxs.yaml and add pinctrl examples to fix
below CHECK_DTB warning:
arch/arm/boot/dts/nxp/mxs/imx28-xea.dtb: pinctrl@80018000 (fsl,imx28-pinctrl):
'auart0-2pins@0', 'auart0@0', ... 'usb1@1' do not match any of the regexes: 'gpio@[0-9]+$', 'pinctrl-[0-9]+'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250820164946.3782702-1-Frank.Li@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The s390 implementation of ptep_modify_prot_start() currently does
preempt_disable(), and the preempt_enable() is done later in
ptep_modify_prot_commit(). This logic is not really required, because the
PTE lock must be held over the complete prot_start/commit transaction,
as described in the comment of the generic implementation of
ptep_modify_prot_start().
That comment also mentions that this interface should be batchable,
and modify_prot_start_ptes() might start a transaction over a batch of
PTEs, implemented as a simple loop over ptep_modify_prot_start().
In this case, the preempt_disable() in ptep_modify_prot_start() would
be called multiple times, before the corresponding preempt_enable()
calls happen, and this can lead to a preempt_count overflow.
To fix this, simply remove the preempt_disable/enable() calls in
ptep_modify_prot_start/commit(), and rely on the PTE lock being held.
Commit cac1db8c3a ("mm: optimize mprotect() by PTE batching") made use
of this PTE batching for the first time, and triggers warnings like this:
DEBUG_LOCKS_WARN_ON((preempt_count() & PREEMPT_MASK) >= PREEMPT_MASK - 10)
BUG: sleeping function called from invalid context at mm/mprotect.c:576
Hence, add a Fixes tag on that commit. Not because it is broken, but to
make sure that it won't get backported w/o also this fix for s390.
Fixes: cac1db8c3a ("mm: optimize mprotect() by PTE batching")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
ENODATA (aka ENOATTR) has a very specific meaning in the xfs xattr code;
namely, that the requested attribute name could not be found.
However, a medium error from disk may also return ENODATA. At best,
this medium error may escape to userspace as "attribute not found"
when in fact it's an IO (disk) error.
At worst, we may oops in xfs_attr_leaf_get() when we do:
error = xfs_attr_leaf_hasname(args, &bp);
if (error == -ENOATTR) {
xfs_trans_brelse(args->trans, bp);
return error;
}
because an ENODATA/ENOATTR error from disk leaves us with a null bp,
and the xfs_trans_brelse will then null-deref it.
As discussed on the list, we really need to modify the lower level
IO functions to trap all disk errors and ensure that we don't let
unique errors like this leak up into higher xfs functions - many
like this should be remapped to EIO.
However, this patch directly addresses a reported bug in the xattr
code, and should be safe to backport to stable kernels. A larger-scope
patch to handle more unique errors at lower levels can follow later.
(Note, prior to 07120f1abd we did not oops, but we did return the
wrong error code to userspace.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Fixes: 07120f1abd ("xfs: Add xfs_has_attr and subroutines")
Cc: stable@vger.kernel.org # v5.9+
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add a handshake value of 0x32, which is required when the device
was previously used by another OS with the official drivers.
Correct the last byte of the MIDI output protocol to 0xe0.
Also, remove the unused DRIVER_VERSION macro.
Signed-off-by: Šerif Rami <ramiserifpersia@gmail.com>
Link: https://patch.msgid.link/20250825072557.7670-1-ramiserifpersia@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On CPU offline the kernel stalled with below call trace:
INFO: task kworker/0:1:11 blocked for more than 120 seconds.
cpuhp hold the cpu hotplug lock endless and stalled vmstat_shepherd.
This is because we count nr_running twice on cpuhp enqueuing and failed
the wait condition of cpuhp:
enqueue_task_fair() // pick cpuhp from idle, rq->nr_running = 0
dl_server_start()
[...]
add_nr_running() // rq->nr_running = 1
add_nr_running() // rq->nr_running = 2
[switch to cpuhp, waiting on balance_hotplug_wait()]
rcuwait_wait_event(rq->nr_running == 1 && ...) // failed, rq->nr_running=2
schedule() // wait again
It doesn't make sense to count the dl_server towards runnable tasks,
since it runs other tasks.
Fixes: 63ba8422f8 ("sched/deadline: Introduce deadline servers")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250627035420.37712-1-yangyicong@huawei.com
[Symptom]
The fair server mechanism, which is intended to prevent fair starvation
when higher-priority tasks monopolize the CPU.
Specifically, RT tasks on the runqueue may not be scheduled as expected.
[Analysis]
The log "sched: DL replenish lagged too much" triggered.
By memory dump of dl_server:
curr = 0xFFFFFF80D6A0AC00 (
dl_server = 0xFFFFFF83CD5B1470(
dl_runtime = 0x02FAF080,
dl_deadline = 0x3B9ACA00,
dl_period = 0x3B9ACA00,
dl_bw = 0xCCCC,
dl_density = 0xCCCC,
runtime = 0x02FAF080,
deadline = 0x0000082031EB0E80,
flags = 0x0,
dl_throttled = 0x0,
dl_yielded = 0x0,
dl_non_contending = 0x0,
dl_overrun = 0x0,
dl_server = 0x1,
dl_server_active = 0x1,
dl_defer = 0x1,
dl_defer_armed = 0x0,
dl_defer_running = 0x1,
dl_timer = (
node = (
expires = 0x000008199756E700),
_softexpires = 0x000008199756E700,
function = 0xFFFFFFDB9AF44D30 = dl_task_timer,
base = 0xFFFFFF83CD5A12C0,
state = 0x0,
is_rel = 0x0,
is_soft = 0x0,
clock_update_flags = 0x4,
clock = 0x000008204A496900,
- The timer expiration time (rq->curr->dl_server->dl_timer->expires)
is already in the past, indicating the timer has expired.
- The timer state (rq->curr->dl_server->dl_timer->state) is 0.
[Suspected Root Cause]
The relevant code flow in the throttle path of
update_curr_dl_se() as follows:
dequeue_dl_entity(dl_se, 0); // the DL entity is dequeued
if (unlikely(is_dl_boosted(dl_se) || !start_dl_timer(dl_se))) {
if (dl_server(dl_se)) // timer registration fails
enqueue_dl_entity(dl_se, ENQUEUE_REPLENISH);//enqueue immediately
...
}
The failure of `start_dl_timer` is caused by attempting to register a
timer with an expiration time that is already in the past. When this
situation persists, the code repeatedly re-enqueues the DL entity
without properly replenishing or restarting the timer, resulting in RT
task may not be scheduled as expected.
[Proposed Solution]:
Instead of immediately re-enqueuing the DL entity on timer registration
failure, this change ensures the DL entity is properly replenished and
the timer is restarted, preventing RT potential starvation.
Fixes: 63ba8422f8 ("sched/deadline: Introduce deadline servers")
Signed-off-by: kuyo chang <kuyo.chang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Closes: https://lore.kernel.org/CAMuHMdXn4z1pioTtBGMfQM0jsLviqS2jwysaWXpoLxWYoGa82w@mail.gmail.com
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lkml.kernel.org/r/20250615131129.954975-1-kuyo.chang@mediatek.com
Commit cccb45d7c4 ("sched/deadline: Less agressive dl_server
handling") reduced dl-server overhead by delaying disabling servers only
after there are no fair task around for a whole period, which means that
deadline entities are not dequeued right away on a server stop event.
However, the delay opens up a window in which a request for changing
server parameters can break per-runqueue running_bw tracking, as
reported by Yuri.
Close the problematic window by unconditionally calling dl_server_stop()
before applying the new parameters (ensuring deadline entities go
through an actual dequeue).
Fixes: cccb45d7c4 ("sched/deadline: Less agressive dl_server handling")
Reported-by: Yuri Andriaccio <yurand2000@gmail.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20250721-upstream-fix-dlserver-lessaggressive-b4-v1-1-4ebc10c87e40@redhat.com
Commit cccb45d7c4 ("sched/deadline: Less agressive dl_server handling")
introduces dl_server_stopped(). But it is obvious that dl_server_stopped()
should return true if dl_se->dl_server_active is 0.
Fixes: cccb45d7c4 ("sched/deadline: Less agressive dl_server handling")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250809130419.1980742-1-chenhuacai@loongson.cn
This reverts commit 482c7e296e.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc7 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250715084549.41473-1-tzimmermann@suse.de
