[ Upstream commit 56e230723e ]
Some systems have enabled ISH without any sensors. In this case sending
HOSTIF_DM_ENUM_DEVICES results in 0 sensors. This triggers ISH hardware
reset on subsequent enumeration after S3/S4 resume.
The enum_devices_done flag was not reset before sending the
HOSTIF_DM_ENUM_DEVICES command. On subsequent enumeration calls (such as
after S3/S4 resume), this flag retains its previous true value, causing the
wait loop to be skipped and returning prematurely to hid_ishtp_cl_init().
If 0 HID devices are found, hid_ishtp_cl_init() skips getting HID device
descriptors and sets init_done to true. When the delayed enumeration
response arrives with init_done already true, the driver treats it as a bad
packet and triggers an ISH hardware reset.
Set enum_devices_done to false before sending the enumeration command,
consistent with similar functions like ishtp_get_hid_descriptor() and
ishtp_get_report_descriptor() which reset their respective flags.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25fd7ee7bf ]
The syscall number is a user-controlled value used to index into the
syscall table. Use array_index_nospec() to clamp this value after the
bounds check to prevent speculative out-of-bounds access and subsequent
data leakage via cache side channels.
Signed-off-by: Lukas Gerlach <lukas.gerlach@cispa.de>
Link: https://patch.msgid.link/20251218191332.35849-3-lukas.gerlach@cispa.de
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1c050f92d ]
If we fail to allocate a path or join a transaction, we return from
__cow_file_range_inline() without freeing the reserved qgroup data,
resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data()
in such cases.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daeed86b68 ]
The ishtp_cl_bus_match() function previously only checked the first entry
in the driver's device ID table. Update it to iterate over the entire
table, allowing proper matching for drivers with multiple supported
protocol GUIDs.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8da41de0b ]
If we fail to create an inline extent due to -ENOSPC, we will attempt to
go through the normal COW path, reserve an extent, create an ordered
extent, etc. However we were always freeing the reserved qgroup data,
which is wrong since we will use data. Fix this by freeing the reserved
qgroup data in __cow_file_range_inline() only if we are not doing the
fallback (ret is <= 0).
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3296c3012a ]
When the command is a replay operation and -ENOEXEC is returned,
the refcount of ksmbd_file must be released.
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bdc1ab5e4 ]
This patch allows the LoongArch BPF JIT to handle recoverable memory
access errors generated by BPF_PROBE_MEM* instructions.
When a BPF program performs memory access operations, the instructions
it executes may trigger ADEM exceptions. The kernel’s built-in BPF
exception table mechanism (EX_TYPE_BPF) will generate corresponding
exception fixup entries in the JIT compilation phase; however, the
architecture-specific trap handling function needs to proactively call
the common fixup routine to achieve exception recovery.
do_ade(): fix EX_TYPE_BPF memory access exceptions for BPF programs,
ensure safe execution.
Relevant test cases: illegal address access tests in module_attach and
subprogs_extable of selftests/bpf.
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc5ff25009 ]
Allocate the overflowing CQE with GFP_NOWAIT instead of GFP_ATOMIC. This
changes causes allocations to fail earlier in out-of-memory situations,
rather than being deferred. Using GFP_ATOMIC allows a process to exceed
memory limits.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220794
Signed-off-by: Alexandre Negrel <alexandre@negrel.dev>
Link: https://lore.kernel.org/io-uring/20251229201933.515797-1-alexandre@negrel.dev/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cc583653b ]
In raid1_reshape(), freeze_array() is called before modifying the r1bio
memory pool (conf->r1bio_pool) and conf->raid_disks, and
unfreeze_array() is called after the update is completed.
However, freeze_array() only waits until nr_sync_pending and
(nr_pending - nr_queued) of all buckets reaches zero. When an I/O error
occurs, nr_queued is increased and the corresponding r1bio is queued to
either retry_list or bio_end_io_list. As a result, freeze_array() may
unblock before these r1bios are released.
This can lead to a situation where conf->raid_disks and the mempool have
already been updated while queued r1bios, allocated with the old
raid_disks value, are later released. Consequently, free_r1bio() may
access memory out of bounds in put_all_bios() and release r1bios of the
wrong size to the new mempool, potentially causing issues with the
mempool as well.
Since only normal I/O might increase nr_queued while an I/O error occurs,
suspending the array avoids this issue.
Note: Updating raid_disks via ioctl SET_ARRAY_INFO already suspends
the array. Therefore, we suspend the array when updating raid_disks
via sysfs to avoid this issue too.
Signed-off-by: FengWei Shih <dannyshih@synology.com>
Link: https://lore.kernel.org/linux-raid/20251226101816.4506-1-dannyshih@synology.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5be446948 ]
For 32BIT platform _PAGE_PROTNONE is 0, so set a VMA to be VM_NONE or
VM_SHARED will make pages non-present, then cause Oops with kernel page
fault.
Fix it by set correct protection_map[] for VM_NONE/VM_SHARED, replacing
_PAGE_PROTNONE with _PAGE_PRESENT.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04bdb1a04d ]
Route bfqg_stats_add_aux() time accumulation into the destination
stats object instead of the source, aligning with other stat fields.
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: shechenglong <shechenglong@xfusion.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81d90d93d2 ]
Since commit dfb073d32c ("ptp: Return -EINVAL on ptp_clock_register if
required ops are NULL"), PTP clock registered through ptp_clock_register
is required to have ptp_clock_info.settime64 set, however, neither MVM
nor MLD's PTP clock implementation sets it, resulting in warnings when
the interface starts up, like
WARNING: drivers/ptp/ptp_clock.c:325 at ptp_clock_register+0x2c8/0x6b8, CPU#1: wpa_supplicant/469
CPU: 1 UID: 0 PID: 469 Comm: wpa_supplicant Not tainted 6.18.0+ #101 PREEMPT(full)
ra: ffff800002732cd4 iwl_mvm_ptp_init+0x114/0x188 [iwlmvm]
ERA: 9000000002fdc468 ptp_clock_register+0x2c8/0x6b8
iwlwifi 0000:01:00.0: Failed to register PHC clock (-22)
I don't find an appropriate firmware interface to implement settime64()
for iwlwifi MLD/MVM, thus instead create a stub that returns
-EOPTNOTSUPP only, suppressing the warning and allowing the PTP clock to
be registered.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20251108044822.GA3262936@ax162/
Signed-off-by: Yao Zi <ziyao@disroot.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
tested-by: damian Tometzki damian@riscv-rocks.de
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251204123204.9316-1-ziyao@disroot.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99067b58a4 ]
It's not clear (to me) how exactly syzbot managed to hit this,
but it seems conceivable that e.g. regulatory changed and has
disabled a channel between scanning (channel is checked to be
usable by cfg80211_get_ies_channel_number) and connecting on
the channel later.
With one scenario that isn't covered elsewhere described above,
the warning isn't good, replace it with a (more informative)
error message.
Reported-by: syzbot+639af5aa411f2581ad38@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20251202102511.5a8fb5184fa3.I961ee41b8f10538a54b8565dbf03ec1696e80e03@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e75665dd09 ]
This avoids occasional skb_under_panic Oops from wl1271_tx_work. In this case, headroom is
less than needed (typically 110 - 94 = 16 bytes).
Signed-off-by: Peter Astrand <astrand@lysator.liu.se>
Link: https://patch.msgid.link/097bd417-e1d7-acd4-be05-47b199075013@lysator.liu.se
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 033c55fe2e ]
The fields of ftrace specific events (events used to save ftrace internal
events like function traces and trace_printk) are generated similarly to
how normal trace event fields are generated. That is, the fields are added
to a trace_events_fields array that saves the name, offset, size,
alignment and signness of the field. It is used to produce the output in
the format file in tracefs so that tooling knows how to parse the binary
data of the trace events.
The issue is that some of the ftrace event structures are packed. The
function graph exit event structures are one of them. The 64 bit calltime
and rettime fields end up 4 byte aligned, but the algorithm to show to
userspace shows them as 8 byte aligned.
The macros that create the ftrace events has one for embedded structure
fields. There's two macros for theses fields:
__field_desc() and __field_packed()
The difference of the latter macro is that it treats the field as packed.
Rename that field to __field_desc_packed() and create replace the
__field_packed() to be a normal field that is packed and have the calltime
and rettime use those.
This showed up on 32bit architectures for function graph time fields. It
had:
~# cat /sys/kernel/tracing/events/ftrace/funcgraph_exit/format
[..]
field:unsigned long func; offset:8; size:4; signed:0;
field:unsigned int depth; offset:12; size:4; signed:0;
field:unsigned int overrun; offset:16; size:4; signed:0;
field:unsigned long long calltime; offset:24; size:8; signed:0;
field:unsigned long long rettime; offset:32; size:8; signed:0;
Notice that overrun is at offset 16 with size 4, where in the structure
calltime is at offset 20 (16 + 4), but it shows the offset at 24. That's
because it used the alignment of unsigned long long when used as a
declaration and not as a member of a structure where it would be aligned
by word size (in this case 4).
By using the proper structure alignment, the format has it at the correct
offset:
~# cat /sys/kernel/tracing/events/ftrace/funcgraph_exit/format
[..]
field:unsigned long func; offset:8; size:4; signed:0;
field:unsigned int depth; offset:12; size:4; signed:0;
field:unsigned int overrun; offset:16; size:4; signed:0;
field:unsigned long long calltime; offset:20; size:8; signed:0;
field:unsigned long long rettime; offset:28; size:8; signed:0;
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: "jempty.liang" <imntjempty@163.com>
Link: https://patch.msgid.link/20260204113628.53faec78@gandalf.local.home
Fixes: 04ae87a520 ("ftrace: Rework event_create_dir()")
Closes: https://lore.kernel.org/all/20260130015740.212343-1-imntjempty@163.com/
Closes: https://lore.kernel.org/all/20260202123342.2544795-1-imntjempty@163.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
[ Different variable types and some renames ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec4ddc90d2 upstream.
The 'max' argument of ida_alloc_max() takes the maximum valid ID and not
the "count". Using an ID of BINDERFS_MAX_MINOR (1 << 20) for dev->minor
would exceed the limits of minor numbers (20-bits). Fix this off-by-one
error by subtracting 1 from the 'max'.
Cc: stable@vger.kernel.org
Fixes: 3ad20fe393 ("binder: implement binderfs")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260127235545.2307876-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1769f90e5b upstream.
The error logging for failed transactions is misleading as it always
reports "dead process or thread" even when the target is actually
frozen. Additionally, the pid and tid are reversed which can further
confuse debugging efforts. Fix both issues.
Cc: stable@kernel.org
Cc: Steven Moreland <smoreland@google.com>
Fixes: a15dac8b22 ("binder: additional transaction error logs")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260123175702.2154348-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e8a3d0154 upstream.
Oneway transactions sent to frozen targets via binder_proc_transaction()
return a BR_TRANSACTION_PENDING_FROZEN error but they are still treated
as successful since the target is expected to thaw at some point. It is
then not safe to access 't' after BR_TRANSACTION_PENDING_FROZEN errors
as the transaction could have been consumed by the now thawed target.
This is the case for binder_netlink_report() which derreferences 't'
after a pending frozen error, as pointed out by the following KASAN
report:
==================================================================
BUG: KASAN: slab-use-after-free in binder_netlink_report.isra.0+0x694/0x6c8
Read of size 8 at addr ffff00000f98ba38 by task binder-util/522
CPU: 4 UID: 0 PID: 522 Comm: binder-util Not tainted 6.19.0-rc6-00015-gc03e9c42ae8f #1 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
binder_netlink_report.isra.0+0x694/0x6c8
binder_transaction+0x66e4/0x79b8
binder_thread_write+0xab4/0x4440
binder_ioctl+0x1fd4/0x2940
[...]
Allocated by task 522:
__kmalloc_cache_noprof+0x17c/0x50c
binder_transaction+0x584/0x79b8
binder_thread_write+0xab4/0x4440
binder_ioctl+0x1fd4/0x2940
[...]
Freed by task 488:
kfree+0x1d0/0x420
binder_free_transaction+0x150/0x234
binder_thread_read+0x2d08/0x3ce4
binder_ioctl+0x488/0x2940
[...]
==================================================================
Instead, make a transaction copy so the data can be safely accessed by
binder_netlink_report() after a pending frozen error. While here, add a
comment about not using t->buffer in binder_netlink_report().
Cc: stable@vger.kernel.org
Fixes: 63740349eb ("binder: introduce transaction reports via netlink")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260122180203.1502637-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d6ba734814 upstream.
The 'max' argument of ida_alloc_max() takes the maximum valid ID and not
the "count". Using an ID of BINDERFS_MAX_MINOR (1 << 20) for dev->minor
would exceed the limits of minor numbers (20-bits). Fix this off-by-one
error by subtracting 1 from the 'max'.
Cc: stable@vger.kernel.org
Fixes: eafedbc7c0 ("rust_binder: add Rust Binder driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202512181203.IOv6IChH-lkp@intel.com/
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260127235545.2307876-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d047248190 upstream.
This adds some alignment checks to match C Binder more closely. This
causes the driver to reject more transactions. I don't think any of the
transactions in question are harmful, but it's still a bug because it's
the wrong uapi to accept them.
The cases where usize is changed for u64, it will affect only 32-bit
kernels.
Cc: stable@vger.kernel.org
Fixes: eafedbc7c0 ("rust_binder: add Rust Binder driver")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260123-binder-alignment-more-checks-v1-1-7e1cea77411d@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f589c9c3b upstream.
Fix a bug where an empty FDA (fd array) object with 0 fds would cause an
out-of-bounds error. The previous implementation used `skip == 0` to
mean "this is a pointer fixup", but 0 is also the correct skip length
for an empty FDA. If the FDA is at the end of the buffer, then this
results in an attempt to write 8-bytes out of bounds. This is caught and
results in an EINVAL error being returned to userspace.
The pattern of using `skip == 0` as a special value originates from the
C-implementation of Binder. As part of fixing this bug, this pattern is
replaced with a Rust enum.
I considered the alternate option of not pushing a fixup when the length
is zero, but I think it's cleaner to just get rid of the zero-is-special
stuff.
The root cause of this bug was diagnosed by Gemini CLI on first try. I
used the following prompt:
> There appears to be a bug in @drivers/android/binder/thread.rs where
> the Fixups oob bug is triggered with 316 304 316 324. This implies
> that we somehow ended up with a fixup where buffer A has a pointer to
> buffer B, but the pointer is located at an index in buffer A that is
> out of bounds. Please investigate the code to find the bug. You may
> compare with @drivers/android/binder.c that implements this correctly.
Cc: stable@vger.kernel.org
Reported-by: DeepChirp <DeepChirp@outlook.com>
Closes: https://github.com/waydroid/waydroid/issues/2157
Fixes: eafedbc7c0 ("rust_binder: add Rust Binder driver")
Tested-by: DeepChirp <DeepChirp@outlook.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20251229-fda-zero-v1-1-58a41cb0e7ec@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 522fb20fbd upstream.
Also serialize the possiblty much more frequent newidle balancing for
the 'expensive' domains that have SD_BALANCE set.
Initial benchmarking by K Prateek and Tim showed no negative effect.
Split out from the larger patch moving sched_balance_running around
for ease of bisect and such.
Suggested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Seconded-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/df068896-82f9-458d-8fff-5a2f654e8ffd@amd.com
Link: https://patch.msgid.link/6fed119b723c71552943bfe5798c93851b30a361.1762800251.git.tim.c.chen@linux.intel.com
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3324b2180c upstream.
The NUMA sched domain sets the SD_SERIALIZE flag by default, allowing
only one NUMA load balancing operation to run system-wide at a time.
Currently, each sched group leader directly under NUMA domain attempts
to acquire the global sched_balance_running flag via cmpxchg() before
checking whether load balancing is due or whether it is the designated
load balancer for that NUMA domain. On systems with a large number
of cores, this causes significant cache contention on the shared
sched_balance_running flag.
This patch reduces unnecessary cmpxchg() operations by first checking
that the balancer is the designated leader for a NUMA domain from
should_we_balance(), and the balance interval has expired before
trying to acquire sched_balance_running to load balance a NUMA
domain.
On a 2-socket Granite Rapids system with sub-NUMA clustering enabled,
running an OLTP workload, 7.8% of total CPU cycles were previously spent
in sched_balance_domain() contending on sched_balance_running before
this change.
: 104 static __always_inline int arch_atomic_cmpxchg(atomic_t *v, int old, int new)
: 105 {
: 106 return arch_cmpxchg(&v->counter, old, new);
0.00 : ffffffff81326e6c: xor %eax,%eax
0.00 : ffffffff81326e6e: mov $0x1,%ecx
0.00 : ffffffff81326e73: lock cmpxchg %ecx,0x2394195(%rip) # ffffffff836bb010 <sched_balance_running>
: 110 sched_balance_domains():
: 12234 if (atomic_cmpxchg_acquire(&sched_balance_running, 0, 1))
99.39 : ffffffff81326e7b: test %eax,%eax
0.00 : ffffffff81326e7d: jne ffffffff81326e99 <sched_balance_domains+0x209>
: 12238 if (time_after_eq(jiffies, sd->last_balance + interval)) {
0.00 : ffffffff81326e7f: mov 0x14e2b3a(%rip),%rax # ffffffff828099c0 <jiffies_64>
0.00 : ffffffff81326e86: sub 0x48(%r14),%rax
0.00 : ffffffff81326e8a: cmp %rdx,%rax
After applying this fix, sched_balance_domain() is gone from the profile
and there is a 5% throughput improvement.
[peterz: made it so that redo retains the 'lock' and split out the
CPU_NEWLY_IDLE change to a separate patch]
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Tested-by: Mohini Narkhede <mohini.narkhede@intel.com>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://patch.msgid.link/6fed119b723c71552943bfe5798c93851b30a361.1762800251.git.tim.c.chen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 383d89699c upstream.
In 2009, commit c82f63e411 ("PCI: check saved state before restore")
changed the behavior of pci_restore_state() such that it became necessary
to call pci_save_state() afterwards, lest recovery from subsequent PCI
errors fails.
The commit has just been reverted and so all the pci_save_state() after
pci_restore_state() calls that have accumulated in the tree are now
superfluous. Drop them.
Two drivers chose a different approach to achieve the same result:
drivers/scsi/ipr.c and drivers/net/ethernet/intel/e1000e/netdev.c set the
pci_dev's "state_saved" flag to true before calling pci_restore_state().
Drop this as well.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # qat
Link: https://patch.msgid.link/c2b28cc4defa1b743cf1dedee23c455be98b397a.1760274044.git.lukas@wunner.de
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2f1e22390 upstream.
When the PCI core gained power management support in 2002, it introduced
pci_save_state() and pci_restore_state() helpers to restore Config Space
after a D3hot or D3cold transition, which implies a Soft or Fundamental
Reset (PCIe r7.0 sec 5.8):
https://git.kernel.org/tglx/history/c/a5287abe398b
In 2006, EEH and AER were introduced to recover from errors by performing
a reset. Because errors can occur at any time, drivers began calling
pci_save_state() on probe to ensure recoverability.
In 2009, recoverability was foiled by commit c82f63e411 ("PCI: check
saved state before restore"): It amended pci_restore_state() to bail out
if the "state_saved" flag has been cleared. The flag is cleared by
pci_restore_state() itself, hence a saved state is now allowed to be
restored only once and is then invalidated. That doesn't seem to make
sense because the saved state should be good enough to be reused.
Soon after, drivers began to work around this behavior by calling
pci_save_state() immediately after pci_restore_state(), see e.g. commit
b94f2d775a ("igb: call pci_save_state after pci_restore_state").
Hilariously, two drivers even set the "saved_state" flag to true before
invoking pci_restore_state(), see ipr_reset_restore_cfg_space() and
e1000_io_slot_reset().
Despite these workarounds, recoverability at all times is not guaranteed:
E.g. when a PCIe port goes through a runtime suspend and resume cycle,
the "saved_state" flag is cleared by:
pci_pm_runtime_resume()
pci_pm_default_resume_early()
pci_restore_state()
... and hence on a subsequent AER event, the port's Config Space cannot be
restored. Riana reports a recovery failure of a GPU-integrated PCIe
switch and has root-caused it to the behavior of pci_restore_state().
Another workaround would be necessary, namely calling pci_save_state() in
pcie_port_device_runtime_resume().
The motivation of commit c82f63e411 was to prevent restoring state if
pci_save_state() hasn't been called before. But that can be achieved by
saving state already on device addition, after Config Space has been
initialized. A desirable side effect is that devices become recoverable
even if no driver gets bound. This renders the commit unnecessary, so
revert it.
Reported-by: Riana Tauro <riana.tauro@intel.com> # off-list
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/9e34ce61c5404e99ffdd29205122c6fb334b38aa.1763483367.git.lukas@wunner.de
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52fb36a5f9 upstream.
When CONFIG_PM is disabled, the GPIO controlled FANs can't be stopped by
using the sysfs attributes since commit 0d01110e63 ("hwmon: (gpio-fan)
Add regulator support").
Using either the 'pwm1' or the 'fan1_target' attribute fails the same way:
$ echo 0 > /sys/class/hwmon/hwmon1/pwm1
ash: write error: Function not implemented
$ echo 0 > /sys/class/hwmon/hwmon1/fan1_target
ash: write error: Function not implemented
Both commands were working flawlessly before the mentioned commit.
The issue happens because pm_runtime_put_sync() returns with -ENOSYS
when CONFIG_PM is disabled, and the set_fan_speed() function handles
this as an error.
In order to restore the previous behaviour, change the error check in
the set_fan_speed() function to ignore the -ENOSYS error code.
Cc: stable@vger.kernel.org
Fixes: 0d01110e63 ("hwmon: (gpio-fan) Add regulator support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20260202-gpio-fan-stop-fix-v1-1-c7853183d93d@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5c092787c upstream.
The set_rpm function is used as a 'store' callback of a device attribute,
and as such it should return with the number of bytes consumed. However
since commit 0d01110e63 ("hwmon: (gpio-fan) Add regulator support"),
the function returns with zero on success.
Due to this, the function gets called again and again whenever the user
tries to change the FAN speed by writing the desired RPM value into the
'fan1_target' sysfs attribute.
The broken behaviour can be reproduced easily. For example, the following
command never returns unless it gets terminated:
$ echo 500 > /sys/class/hwmon/hwmon1/fan1_target
^C
$
Change the code to return with the same value as the 'count' parameter
on success to indicate that all bytes from the input buffer are consumed.
The function behaved the same way prior to the offending change.
Cc: stable@vger.kernel.org
Fixes: 0d01110e63 ("hwmon: (gpio-fan) Add regulator support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20260201-gpio-fan-set_rpm-retval-fix-v1-1-dc39bc7693ca@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4d37cdb77 upstream.
When deassigning a KVM_IRQFD, don't clobber the irqfd's copy of the IRQ's
routing entry as doing so breaks kvm_arch_irq_bypass_del_producer() on x86
and arm64, which explicitly look for KVM_IRQ_ROUTING_MSI. Instead, to
handle a concurrent routing update, verify that the irqfd is still active
before consuming the routing information. As evidenced by the x86 and
arm64 bugs, and another bug in kvm_arch_update_irqfd_routing() (see below),
clobbering the entry type without notifying arch code is surprising and
error prone.
As a bonus, checking that the irqfd is active provides a convenient
location for documenting _why_ KVM must not consume the routing entry for
an irqfd that is in the process of being deassigned: once the irqfd is
deleted from the list (which happens *before* the eventfd is detached), it
will no longer receive updates via kvm_irq_routing_update(), and so KVM
could deliver an event using stale routing information (relative to
KVM_SET_GSI_ROUTING returning to userspace).
As an even better bonus, explicitly checking for the irqfd being active
fixes a similar bug to the one the clobbering is trying to prevent: if an
irqfd is deactivated, and then its routing is changed,
kvm_irq_routing_update() won't invoke kvm_arch_update_irqfd_routing()
(because the irqfd isn't in the list). And so if the irqfd is in bypass
mode, IRQs will continue to be posted using the old routing information.
As for kvm_arch_irq_bypass_del_producer(), clobbering the routing type
results in KVM incorrectly keeping the IRQ in bypass mode, which is
especially problematic on AMD as KVM tracks IRQs that are being posted to
a vCPU in a list whose lifetime is tied to the irqfd.
Without the help of KASAN to detect use-after-free, the most common
sympton on AMD is a NULL pointer deref in amd_iommu_update_ga() due to
the memory for irqfd structure being re-allocated and zeroed, resulting
in irqfd->irq_bypass_data being NULL when read by
avic_update_iommu_vcpu_affinity():
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 40cf2b9067 P4D 40cf2b9067 PUD 408362a067 PMD 0
Oops: Oops: 0000 [#1] SMP
CPU: 6 UID: 0 PID: 40383 Comm: vfio_irq_test
Tainted: G U W O 6.19.0-smp--5dddc257e6b2-irqfd #31 NONE
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025
RIP: 0010:amd_iommu_update_ga+0x19/0xe0
Call Trace:
<TASK>
avic_update_iommu_vcpu_affinity+0x3d/0x90 [kvm_amd]
__avic_vcpu_load+0xf4/0x130 [kvm_amd]
kvm_arch_vcpu_load+0x89/0x210 [kvm]
vcpu_load+0x30/0x40 [kvm]
kvm_arch_vcpu_ioctl_run+0x45/0x620 [kvm]
kvm_vcpu_ioctl+0x571/0x6a0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x6f/0x9d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x46893b
</TASK>
---[ end trace 0000000000000000 ]---
If AVIC is inhibited when the irfd is deassigned, the bug will manifest as
list corruption, e.g. on the next irqfd assignment.
list_add corruption. next->prev should be prev (ffff8d474d5cd588),
but was 0000000000000000. (next=ffff8d8658f86530).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:31!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 128 UID: 0 PID: 80818 Comm: vfio_irq_test
Tainted: G U W O 6.19.0-smp--f19dc4d680ba-irqfd #28 NONE
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025
RIP: 0010:__list_add_valid_or_report+0x97/0xc0
Call Trace:
<TASK>
avic_pi_update_irte+0x28e/0x2b0 [kvm_amd]
kvm_pi_update_irte+0xbf/0x190 [kvm]
kvm_arch_irq_bypass_add_producer+0x72/0x90 [kvm]
irq_bypass_register_consumer+0xcd/0x170 [irqbypass]
kvm_irqfd+0x4c6/0x540 [kvm]
kvm_vm_ioctl+0x118/0x5d0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x6f/0x9d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
On Intel and arm64, the bug is less noisy, as the end result is that the
device keeps posting IRQs to the vCPU even after it's been deassigned.
Note, the worst of the breakage can be traced back to commit cb21073767
("KVM: Pass new routing entries and irqfd when updating IRTEs"), as before
that commit KVM would pull the routing information from the per-VM routing
table. But as above, similar bugs have existed since support for IRQ
bypass was added. E.g. if a routing change finished before irq_shutdown()
invoked kvm_arch_irq_bypass_del_producer(), VMX and SVM would see stale
routing information and potentially leave the irqfd in bypass mode.
Alternatively, x86 could be fixed by explicitly checking irq_bypass_vcpu
instead of irq_entry.type in kvm_arch_irq_bypass_del_producer(), and arm64
could be modified to utilize irq_bypass_vcpu in a similar manner. But (a)
that wouldn't fix the routing updates bug, and (b) fixing core code doesn't
preclude x86 (or arm64) from adding such code as a sanity check (spoiler
alert).
Fixes: f70c20aaf1 ("KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd'")
Fixes: cb21073767 ("KVM: Pass new routing entries and irqfd when updating IRTEs")
Fixes: a0d7e2fc61 ("KVM: arm64: vgic-v4: Only attempt vLPI mapping for actual MSIs")
Cc: stable@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260113174606.104978-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e396a74222 upstream.
Some distributions (such as Ubuntu) configure GCC so that
_FORTIFY_SOURCE is automatically enabled at -O1 or above. This results
in some fortified version of definitions of standard library functions
are included. While linker resolves the symbols, the fortified versions
might override the definitions in lib/string_override.c and reference to
those PLT entries in GLIBC. This is not a problem for the code in host,
but it is a disaster for the guest code. E.g., if build and run
x86/nested_emulation_test on Ubuntu 24.04 will encounter a L1 #PF due to
memset() reference to __memset_chk@plt.
The option -fno-builtin-memset is not helpful here, because those
fortified versions are not built-in but some definitions which are
included by header, they are for different intentions.
In order to eliminate the unpredictable behaviors may vary depending on
the linker and platform, add the "-U_FORTIFY_SOURCE" into CFLAGS to
prevent from introducing the fortified definitions.
Signed-off-by: Zhiquan Li <zhiquan_li@163.com>
Link: https://patch.msgid.link/20260122053551.548229-1-zhiquan_li@163.com
Fixes: 6b6f71484b ("KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest use")
Cc: stable@vger.kernel.org
[sean: tag for stable]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3125fc1701 upstream.
The driver never programs the MAC frame size and jabber registers,
causing the hardware to reject frames larger than the default 1518
bytes even when larger DMA buffers are allocated.
Program MAC_MAXIMUM_FRAME_SIZE, MAC_TRANSMIT_JABBER_SIZE, and
MAC_RECEIVE_JABBER_SIZE based on the configured MTU. Also fix the
maximum buffer size from 4096 to 4095, since the descriptor buffer
size field is only 12 bits. Account for double VLAN tags in frame
size calculations.
Fixes: bfec6d7f20 ("net: spacemit: Add K1 Ethernet MAC")
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
Link: https://patch.msgid.link/20260130102301.477514-1-tmshlvck@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0b5dc73a3 upstream.
Commit 1767bb2d47 ("ipv6: mcast: Don't hold RTNL for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this
change triggered the following call trace on my BeagleBone Black board:
WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/496
RTNL: assertion failed at net/8021q/vlan_core.c (236)
Modules linked in:
CPU: 0 UID: 997 PID: 496 Comm: rpcbind Not tainted 6.19.0-rc6-next-20260122-yocto-standard+ #8 PREEMPT
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x28/0x2c
show_stack from dump_stack_lvl+0x30/0x38
dump_stack_lvl from __warn+0xb8/0x11c
__warn from warn_slowpath_fmt+0x130/0x194
warn_slowpath_fmt from vlan_for_each+0x120/0x124
vlan_for_each from cpsw_add_mc_addr+0x54/0xd8
cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec
__hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88
__dev_mc_add from igmp6_group_added+0x84/0xec
igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0
__ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4
__ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168
do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8
ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c
do_sock_setsockopt from __sys_setsockopt+0x84/0xac
__sys_setsockopt from ret_fast_syscall+0x0/0x5
This trace occurs because vlan_for_each() is called within
cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held.
Since modifying vlan_for_each() to operate without the RTNL lock is not
straightforward, and because ndo_set_rx_mode() is invoked both with and
without the RTNL lock across different code paths, simply adding
rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution.
To resolve this issue, we opt to execute the actual processing within
a work queue, following the approach used by the icssg-prueth driver.
Fixes: 1767bb2d47 ("ipv6: mcast: Don't hold RTNL for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260203-bbb-v5-1-ea0ea217a85c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b8c878d11 upstream.
Commit 1767bb2d47 ("ipv6: mcast: Don't hold RTNL for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this
change triggered the following call trace on my BeagleBone Black board:
WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/481
RTNL: assertion failed at net/8021q/vlan_core.c (236)
Modules linked in:
CPU: 0 UID: 997 PID: 481 Comm: rpcbind Not tainted 6.19.0-rc7-next-20260130-yocto-standard+ #35 PREEMPT
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x28/0x2c
show_stack from dump_stack_lvl+0x30/0x38
dump_stack_lvl from __warn+0xb8/0x11c
__warn from warn_slowpath_fmt+0x130/0x194
warn_slowpath_fmt from vlan_for_each+0x120/0x124
vlan_for_each from cpsw_add_mc_addr+0x54/0x98
cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec
__hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88
__dev_mc_add from igmp6_group_added+0x84/0xec
igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0
__ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4
__ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168
do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8
ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c
do_sock_setsockopt from __sys_setsockopt+0x84/0xac
__sys_setsockopt from ret_fast_syscall+0x0/0x54
This trace occurs because vlan_for_each() is called within
cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held.
Since modifying vlan_for_each() to operate without the RTNL lock is not
straightforward, and because ndo_set_rx_mode() is invoked both with and
without the RTNL lock across different code paths, simply adding
rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution.
To resolve this issue, we opt to execute the actual processing within
a work queue, following the approach used by the icssg-prueth driver.
Please note: To reproduce this issue, I manually reverted the changes to
am335x-bone-common.dtsi from commit c477358e66 ("ARM: dts: am335x-bone:
switch to new cpsw switch drv") in order to revert to the legacy cpsw
driver.
Fixes: 1767bb2d47 ("ipv6: mcast: Don't hold RTNL for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260203-bbb-v5-2-ea0ea217a85c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8302d0afea upstream.
The r570 firmware with certain GPUs (at least RTX6000) needs this
flag to reflect the suspend vs runtime PM state of the driver.
This uses that info to set the correct flags to the firmware.
This fixes a regression on RTX6000 and other GPUs since r570 firmware
was enabled.
Fixes: 53dac06238 ("drm/nouveau/gsp: add support for 570.144")
Cc: <stable@vger.kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260203052431.2219998-4-airlied@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90caca3b72 upstream.
There are two layers of sequence numbers, one at the msg level
and one at the rpc level.
570 firmware started asserting on the sequence numbers being
in the right order, and we would see nocat records with asserts
in them.
Add the rpc level sequence number support.
Fixes: 53dac06238 ("drm/nouveau/gsp: add support for 570.144")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260203052431.2219998-2-airlied@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f8a4dce64 upstream.
This is just refactoring to allow the lower layers to distinguish
between suspend and runtime suspend.
GSP 570 needs to set a flag with the GPU is going into GCOFF,
this flag taken from the opengpu driver is set whenever runtime
suspend is enterning GCOFF but not for normal suspend paths.
This just refactors the code, a subsequent patch use the information.
Fixes: 53dac06238 ("drm/nouveau/gsp: add support for 570.144")
Cc: <stable@vger.kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260203052431.2219998-3-airlied@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 243b467dea upstream.
This reverts commit 7294863a6f.
This commit was erroneously applied again after commit 0ab5d711ec
("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
removed it, leading to very hard to debug crashes, when used with a system with two
AMD GPUs of which only one supports ASPM.
Link: https://lore.kernel.org/linux-acpi/20251006120944.7880-1-spasswolf@web.de/
Link: https://github.com/acpica/acpica/issues/1060
Fixes: 0ab5d711ec ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 97a9689300)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2030dddf95 upstream.
When truncating a large swap entry, shmem_free_swap() returns 0 when the
entry's index doesn't match the given index due to lookup alignment. The
failure fallback path checks if the entry crosses the end border and
aborts when it happens, so truncate won't erase an unexpected entry or
range. But one scenario was ignored.
When `index` points to the middle of a large swap entry, and the large
swap entry doesn't go across the end border, find_get_entries() will
return that large swap entry as the first item in the batch with
`indices[0]` equal to `index`. The entry's base index will be smaller
than `indices[0]`, so shmem_free_swap() will fail and return 0 due to the
"base < index" check. The code will then call shmem_confirm_swap(), get
the order, check if it crosses the END boundary (which it doesn't), and
retry with the same index.
The next iteration will find the same entry again at the same index with
same indices, leading to an infinite loop.
Fix this by retrying with a round-down index, and abort if the index is
smaller than the truncate range.
Link: https://lkml.kernel.org/r/aXo6ltB5iqAKJzY8@KASONG-MC4
Fixes: 809bc86517 ("mm: shmem: support large folio swap out")
Fixes: 8a1968bd99 ("mm/shmem, swap: fix race of truncate and swap entry split")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reported-by: Chris Mason <clm@meta.com>
Closes: https://lore.kernel.org/linux-mm/20260128130336.727049-1-clm@meta.com/
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7db85d579 upstream.
The gve driver's "rx_dropped" statistic, exposed via `ethtool -S`,
incorrectly includes `rx_buf_alloc_fail` counts. These failures
represent an inability to allocate receive buffers, not true packet
drops where a received packet is discarded. This misrepresentation can
lead to inaccurate diagnostics.
This patch rectifies the ethtool "rx_dropped" calculation. It removes
`rx_buf_alloc_fail` from the total and adds `xdp_tx_errors` and
`xdp_redirect_errors`, which represent legitimate packet drops within
the XDP path.
Cc: stable@vger.kernel.org
Fixes: 433e274b8f ("gve: Add stats for gve.")
Signed-off-by: Max Yuan <maxyuan@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Matt Olson <maolson@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260202193925.3106272-3-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b9ebcce02 upstream.
The driver and the NIC share a region in memory for stats reporting.
The NIC calculates its offset into this region based on the total size
of the stats region and the size of the NIC's stats.
When the number of queues is changed, the driver's stats region is
resized. If the queue count is increased, the NIC can write past
the end of the allocated stats region, causing memory corruption.
If the queue count is decreased, there is a gap between the driver
and NIC stats, leading to incorrect stats reporting.
This change fixes the issue by allocating stats region with maximum
size, and the offset calculation for NIC stats is changed to match
with the calculation of the NIC.
Cc: stable@vger.kernel.org
Fixes: 24aeb56f2d ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.")
Signed-off-by: Debarghya Kundu <debarghyak@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260202193925.3106272-2-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1478a34470 upstream.
commit f81cd79311 ("drm/amd/amdgpu: Fix MES init sequence") caused
a dependency on new enough MES firmware to use amdgpu. This was fixed
on most gfx11 and gfx12 hardware with commit 0180e0a5dd
("drm/amdgpu/mes: add compatibility checks for set_hw_resource_1"), but
this left out that GC 11.0.4 had breakage at MES 0x51.
Bump the requirement to 0x52 instead.
Reported-by: danijel@nausys.com
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4576
Fixes: f81cd79311 ("drm/amd/amdgpu: Fix MES init sequence")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c2d2ccc85f)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99a2ef5009 upstream.
An UAF issue was observed:
BUG: KASAN: slab-use-after-free in page_counter_uncharge+0x65/0x150
Write of size 8 at addr ffff888106715440 by task insmod/527
CPU: 4 UID: 0 PID: 527 Comm: insmod 6.19.0-rc7-next-20260129+ #11
Tainted: [O]=OOT_MODULE
Call Trace:
<TASK>
dump_stack_lvl+0x82/0xd0
kasan_report+0xca/0x100
kasan_check_range+0x39/0x1c0
page_counter_uncharge+0x65/0x150
dmem_cgroup_uncharge+0x1f/0x260
Allocated by task 527:
Freed by task 0:
The buggy address belongs to the object at ffff888106715400
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 64 bytes inside of
freed 512-byte region [ffff888106715400, ffff888106715600)
The buggy address belongs to the physical page:
Memory state around the buggy address:
ffff888106715300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888106715380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888106715400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888106715480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888106715500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
The issue occurs because a pool can still be held by a caller after its
associated memory region is unregistered. The current implementation frees
the pool even if users still hold references to it (e.g., before uncharge
operations complete).
This patch adds a reference counter to each pool, ensuring that a pool is
only freed when its reference count drops to zero.
Fixes: b168ed458d ("kernel/cgroup: Add "dmem" memory accounting cgroup")
Cc: stable@vger.kernel.org # v6.14+
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 592a68212c upstream.
A warnning was detected:
WARNING: suspicious RCU usage
6.19.0-rc7-next-20260129+ #1101 Tainted: G O
kernel/cgroup/dmem.c:456 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by insmod/532:
#0: ffffffff85e78b38 (dmemcg_lock){+.+.}-dmem_cgroup_unregister_region+
stack backtrace:
CPU: 2 UID: 0 PID: 532 Comm: insmod Tainted: 6.19.0-rc7-next-
Tainted: [O]=OOT_MODULE
Call Trace:
<TASK>
dump_stack_lvl+0xb0/0xd0
lockdep_rcu_suspicious+0x151/0x1c0
dmem_cgroup_unregister_region+0x1e2/0x380
? __pfx_dmem_test_init+0x10/0x10 [dmem_uaf]
dmem_test_init+0x65/0xff0 [dmem_uaf]
do_one_initcall+0xbb/0x3a0
The macro list_for_each_rcu() must be used within an RCU read-side critical
section (between rcu_read_lock() and rcu_read_unlock()). Using it outside
that context, as seen in dmem_cgroup_unregister_region(), triggers the
lockdep warning because the RCU protection is not guaranteed.
Replace list_for_each_rcu() with list_for_each_entry_safe(), which is
appropriate for traversal under spinlock protection where nodes may be
deleted.
Fixes: b168ed458d ("kernel/cgroup: Add "dmem" memory accounting cgroup")
Cc: stable@vger.kernel.org # v6.14+
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
