commit 99a3e3a1cf upstream.
On PREEMPT_RT kernels, local_lock becomes a sleeping lock. The current
check in kmalloc_nolock() only verifies we're not in NMI or hard IRQ
context, but misses the case where preemption is disabled.
When a BPF program runs from a tracepoint with preemption disabled
(preempt_count > 0), kmalloc_nolock() proceeds to call
local_lock_irqsave() which attempts to acquire a sleeping lock,
triggering:
BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 6128
preempt_count: 2, expected: 0
Fix this by checking !preemptible() on PREEMPT_RT, which directly
expresses the constraint that we cannot take a sleeping lock when
preemption is disabled. This encompasses the previous checks for NMI
and hard IRQ contexts while also catching cases where preemption is
disabled.
Fixes: af92793e52 ("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Reported-by: syzbot+b1546ad4a95331b2101e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b1546ad4a95331b2101e
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20260113150639.48407-1-swarajgaikwad1925@gmail.co
Cc: <stable@vger.kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e4a81881c upstream.
NanoPi M5 derives its analog sound signal from SAI2 in M0 pin mode, so the
MCLK pin should be configured accordingly for the sound codec to get its
I2S signal from the SoC. Request the required pin config.
The clock itself should also be CLK_SAI2_MCLKOUT_TO_IO for the sound to
work (otherwise there is only silence out of the audio out jack).
Fixes: 96cbdfdd3a ("arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support")
Cc: stable@vger.kernel.org
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://patch.msgid.link/20251229-rk3576-sound-v1-2-2f59ef0d19b1@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd8967ea31 upstream.
The Device Tree specification specifies[1] that
"""
Each node in the devicetree is named according to the following
convention:
node-name@unit-address
[...]
The unit-address must match the first address specified in the reg
property of the node.
"""
The first address in the reg property is fdaXa000 and not fdaX9000. This
is likely a copy-paste error as the IOMMU for core0 has two entries in
the reg property, the first one being fdab9000 and the second fdaba000.
Let's fix this oversight to match what the spec is expecting.
[1] https://github.com/devicetree-org/devicetree-specification/releases/download/v0.4/devicetree-specification-v0.4.pdf 2.2.1 Node Names
Fixes: a31dfc060a ("arm64: dts: rockchip: Add nodes for NPU and its MMU to rk3588-base")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://patch.msgid.link/20251215-npu-dt-node-address-v1-1-840093e8a2bf@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5497ffe305 upstream.
Previously sometimes pressing the volume-down button would register as
a volume-up button. Match the thresholds as shown in the Pinephone Pro
schematic.
Tests:
~ $ evtest
// Mashed the volume down ~100 times with varying intensity
Event: time xxx, type 1 (EV_KEY), code 114 (KEY_VOLUMEDOWN), value 1
Event: time xxx, type 1 (EV_KEY), code 114 (KEY_VOLUMEDOWN), value 0
// Mashed the volume up ~100 times with varying intensity
Event: time xxx, type 1 (EV_KEY), code 115 (KEY_VOLUMEUP), value 1
Event: time xxx, type 1 (EV_KEY), code 115 (KEY_VOLUMEUP), value 0
Fixes: d3150ed535 ("arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Link: https://patch.msgid.link/20251124-ppp_light_accel_mag_vol-down-v5-4-f9a10a0a50eb@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0368e4afcf upstream.
Shawn Lin from Rockchip strongly discourages attempts to use their
RK3399 PCIe core at 5.0 GT/s speed, citing concerns about catastrophic
failures that may happen. Even if the odds are low, drop from last user
of this non-default property for the RK3399 platform, helios64 board
dts.
Fixes: 755fff528b ("arm64: dts: rockchip: add variables for pcie completion to helios64")
Link: https://lore.kernel.org/all/e8524bf8-a90c-423f-8a58-9ef05a3db1dd@rock-chips.com/
Cc: stable@vger.kernel.org
Reported-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/43bb639c120f599106fca2deee6c6599b2692c5c.1763415706.git.geraldogabriel@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aabc977aa4 upstream.
Update the ranges property for the flexcom9 as per the datasheet and
align with the reg property.
Fixes: b51e4aea3e ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC")
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20260102170135.70717-2-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e351836a54 upstream.
In commit aef30c8d56 ("genirq: Warn about using IRQF_ONESHOT without a
threaded handler")[1], it will check IRQF_ONESHOT flag in IRQ request,
and gives a warning if there is no threaded handler. Drop this flag to
fix this warning.
Link: https://lore.kernel.org/r/20260112134013.eQWyReHR@linutronix.de/ [1]
Fixes: 5ea558473f ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Yixun Lan <dlan@kernel.org>
Cc: <stable@vger.kernel.org> # v6.15+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260122-05-k1-i2c-irq-v1-1-9b8d94bbcd22@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 901a5f309d upstream.
Memory allocated for struct vscsiblk_info in scsiback_probe() is not
freed in scsiback_remove() leading to potential memory leaks on remove,
as well as in the scsiback_probe() error paths. Fix that by freeing it
in scsiback_remove().
Cc: stable@vger.kernel.org
Fixes: d9d660f6e5 ("xen-scsiback: Add Xen PV SCSI backend driver")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://patch.msgid.link/20251223063012.119035-1-nihaal@cse.iitm.ac.in
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9eacec5d18 upstream.
The Hyper-V host does not support MODE_SENSE_10 and MODE_SENSE. The
driver handles MODE_SENSE as unsupported command, but not for
MODE_SENSE_10. Add MODE_SENSE_10 to the same handling logic and return
correct code to SCSI layer.
Fixes: 89ae7d7093 ("Staging: hv: storvsc: Move the storage driver out of the staging area")
Cc: stable@kernel.org
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20260117010302.294068-1-longli@linux.microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2934325f56 upstream.
The ASUS Zenbook UX425QA_UM425QA fails to initialize the keyboard after
a cold boot.
A quirk already exists for "ZenBook UX425", but some Zenbooks report
"Zenbook" with a lowercase 'b'. Since DMI matching is case-sensitive,
the existing quirk is not applied to these "extra special" Zenbooks.
Testing confirms that this model needs the same quirks as the ZenBook
UX425 variants.
Signed-off-by: feng <alec.jiang@gmail.com>
Link: https://patch.msgid.link/20260122013957.11184-1-alec.jiang@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19a5d9ba62 upstream.
The MECHREVO Wujie 15X Pro requires several i8042 quirks to function
correctly. Specifically, NOMUX, RESET_ALWAYS, NOLOOP, and NOPNP are
needed to ensure the keyboard and touchpad work reliably.
Signed-off-by: gongqi <550230171hxy@gmail.com>
Link: https://patch.msgid.link/20260122155501.376199-3-550230171hxy@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f40ddcc0c0 upstream.
This reverts commit 068648aab7.
NFC packets may have NUL-bytes. Checking for string length is not a correct
assumption here. As long as there is a check for the length copied from
copy_from_user, all should be fine.
The fix only prevented the syzbot reproducer from triggering the bug
because the packet is not enqueued anymore and the code that triggers the
bug is not exercised.
The fix even broke
testing/selftests/nci/nci_dev, making all tests there fail. After the
revert, 6 out of 8 tests pass.
Fixes: 068648aab7 ("nfc/nci: Add the inconsistency check between the input data length and count")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/20260113202458.449455-1-cascardo@igalia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc8f92e41e upstream.
In w1_attach_slave_device(), if __w1_attach_slave_device() fails,
put_device() -> w1_slave_release() is called to do the cleanup job.
In w1_slave_release(), sl->family->refcnt and sl->master->slave_count
have already been decremented. There is no need to decrement twice
in w1_attach_slave_device().
Fixes: 2c927c0c73 ("w1: Fix slave count on 1-Wire bus (resend)")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Link: https://patch.msgid.link/20251218111414.564403-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 761fcf46a1 upstream.
The sysfs buffer passed to alarms_store() is allocated with 'size + 1'
bytes and a NUL terminator is appended. However, the 'size' argument
does not account for this extra byte. The original code then allocated
'size' bytes and used strcpy() to copy 'buf', which always writes one
byte past the allocated buffer since strcpy() copies until the NUL
terminator at index 'size'.
Fix this by parsing the 'buf' parameter directly using simple_strtoll()
without allocating any intermediate memory or string copying. This
removes the overflow while simplifying the code.
Cc: stable@vger.kernel.org
Fixes: e2c94d6f57 ("w1_therm: adding alarm sysfs entry")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251216145007.44328-2-thorsten.blum@linux.dev
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e03b29b55f upstream.
Some of the hardware registers of the DMM-32-AT board are multiplexed,
using the least significant two bits of the Miscellaneous Control
register to select the function of registers at offsets 12 to 15:
00 => 8254 timer/counter registers are accessible
01 => 8255 digital I/O registers are accessible
10 => Reserved
11 => Calibration registers are accessible
The interrupt service routine (`dmm32at_isr()`) clobbers the bottom two
bits of the register with value 00, which would interfere with access to
the 8255 registers by the `dm32at_8255_io()` function (used for Comedi
instruction handling on the digital I/O subdevice).
Make use of the generic Comedi device spin-lock `dev->spinlock` (which
is otherwise unused by this driver) to serialize access to the
miscellaneous control register and paged registers.
Fixes: 3c501880ac ("Staging: comedi: add dmm32at driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260112162835.91688-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32f37e5758 upstream.
Revert commit bfc467db60 ("serial: remove redundant
tty_port_link_device()") because the tty_port_link_device() is not
redundant: the tty->port has to be confured before we call
uart_configure_port(), otherwise user-space can open console without TTY
linked to the driver.
This tty_port_link_device() was added explicitly to avoid this exact
issue in commit fb2b90014d ("tty: link tty and port before configuring
it as console"), so offending commit basically reverted the fix saying
it is redundant without addressing the actual race condition presented
there.
Reproducible always as tty->port warning on Qualcomm SoC with most of
devices disabled, so with very fast boot, and one serial device being
the console:
printk: legacy console [ttyMSM0] enabled
printk: legacy console [ttyMSM0] enabled
printk: legacy bootconsole [qcom_geni0] disabled
printk: legacy bootconsole [qcom_geni0] disabled
------------[ cut here ]------------
tty_init_dev: ttyMSM driver does not set tty->port. This would crash the kernel. Fix the driver!
WARNING: drivers/tty/tty_io.c:1414 at tty_init_dev.part.0+0x228/0x25c, CPU#2: systemd/1
Modules linked in: socinfo tcsrcc_eliza gcc_eliza sm3_ce fuse ipv6
CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G S 6.19.0-rc4-next-20260108-00024-g2202f4d30aa8 #73 PREEMPT
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: Qualcomm Technologies, Inc. Eliza (DT)
...
tty_init_dev.part.0 (drivers/tty/tty_io.c:1414 (discriminator 11)) (P)
tty_open (arch/arm64/include/asm/atomic_ll_sc.h:95 (discriminator 3) drivers/tty/tty_io.c:2073 (discriminator 3) drivers/tty/tty_io.c:2120 (discriminator 3))
chrdev_open (fs/char_dev.c:411)
do_dentry_open (fs/open.c:962)
vfs_open (fs/open.c:1094)
do_open (fs/namei.c:4634)
path_openat (fs/namei.c:4793)
do_filp_open (fs/namei.c:4820)
do_sys_openat2 (fs/open.c:1391 (discriminator 3))
...
Starting Network Name Resolution...
Apparently the flow with this small Yocto-based ramdisk user-space is:
driver (qcom_geni_serial.c): user-space:
============================ ===========
qcom_geni_serial_probe()
uart_add_one_port()
serial_core_register_port()
serial_core_add_one_port()
uart_configure_port()
register_console()
|
| open console
| ...
| tty_init_dev()
| driver->ports[idx] is NULL
|
tty_port_register_device_attr_serdev()
tty_port_link_device() <- set driver->ports[idx]
Fixes: bfc467db60 ("serial: remove redundant tty_port_link_device()")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260123072139.53293-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27aff0a56b upstream.
Fintek F81504/508/512 can support both RTS_ON_SEND and RTS_AFTER_SEND,
but pci_fintek_rs485_supported only announces the former.
This makes it impossible to unset SER_RS485_RTS_ON_SEND from
userspace because of uart_sanitize_serial_rs485(). Some devices
with these chips need RTS low on TX, so they are effectively broken.
Fix this by announcing the support for SER_RS485_RTS_AFTER_SEND,
similar to commit 068d35a7be ("serial: sc16is7xx: announce support
for SER_RS485_RTS_ON_SEND").
Fixes: 4afeced55b ("serial: core: fix sanitizing check for RTS settings")
Cc: stable <stable@kernel.org>
Signed-off-by: Marnix Rijnart <marnix.rijnart@iwell.eu>
Link: https://patch.msgid.link/20260112000931.61703-1-marnix.rijnart@iwell.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5dc6975566 ]
S1G beacons don't contain the DA field as per IEEE80211-2024 9.3.4.3,
so the DA broadcast check reads the SA address of the S1G beacon which
will subsequently lead to the beacon being dropped. As a result, passive
scanning is not possible. Fix this by only performing the check on
non-S1G beacons to allow S1G long beacons to be processed during a
passive scan.
Fixes: ddf82e752f ("wifi: mac80211: Allow beacons to update BSS table regardless of scan")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260120031122.309942-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2397e92646 ]
authencesn assumes an ESP/ESN-formatted AAD. When assoclen is shorter than
the minimum expected length, crypto_authenc_esn_decrypt() can advance past
the end of the destination scatterlist and trigger a NULL pointer dereference
in scatterwalk_map_and_copy(), leading to a kernel panic (DoS).
Add a minimum AAD length check to fail fast on invalid inputs.
Fixes: 104880a6b4 ("crypto: authencesn - Convert to new AEAD interface")
Reported-By: Taeyang Lee <0wn@theori.io>
Signed-off-by: Taeyang Lee <0wn@theori.io>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d837fbee92 ]
This is more of a preventive patch to make the code more consistent and
to prevent possible exploits that employ child qlen manipulations on qfq.
use cl_is_active instead of relying on the child qdisc's qlen to determine
class activation.
Fixes: 462dbc9101 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260114160243.913069-3-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50da4b9d07 ]
Design intent of teql is that it is only supposed to be used as root qdisc.
We need to check for that constraint.
Although not important, I will describe the scenario that unearthed this
issue for the curious.
GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows:
ROOT qdisc 1:0 (QFQ)
├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s
└── class 1:2 (weight=1, lmax=1514) teql
GangMin sends a packet which is enqueued to 1:1 (netem).
Any invocation of dequeue by QFQ from this class will not return a packet
until after 6.4s. In the meantime, a second packet is sent and it lands on
1:2. teql's enqueue will return success and this will activate class 1:2.
Main issue is that teql only updates the parent visible qlen (sch->q.qlen)
at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's
peek always returns NULL), dequeue will never be called and thus the qlen
will remain as 0. With that in mind, when GangMin updates 1:2's lmax value,
the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's
qlen was not incremented, qfq fails to deactivate the class, but still
frees its pointers from the aggregate. So when the first packet is
rescheduled after 6.4 seconds (netem's delay), a dangling pointer is
accessed causing GangMin's causing a UAF.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: GangMin Kim <km.kim1503@gmail.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260114160243.913069-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab9b218a15 ]
The RX flowid programming initializes the TCAM mask to all ones, but
then overwrites it when clearing the MAC DA mask bits. This results
in losing the intended initialization and may affect other match fields.
Update the code to clear the MAC DA bits using an AND operation, making
the handling of mask[0] consistent with mask[1], where the field-specific
bits are cleared after initializing the mask to ~0ULL.
Fixes: 57d00d4364 ("octeontx2-pf: mcs: Match macsec ethertype along with DMAC")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20260116164724.2733511-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3ba321624 ]
Make the addrs_lock be per port, not per ipvlan dev.
Initial code seems to be written in the assumption,
that any address change must occur under RTNL.
But it is not so for the case of IPv6. So
1) Introduce per-port addrs_lock.
2) It was needed to fix places where it was forgotten
to take lock (ipvlan_open/ipvlan_close)
This appears to be a very minor problem though.
Since it's highly unlikely that ipvlan_add_addr() will
be called on 2 CPU simultaneously. But nevertheless,
this could cause:
1) False-negative of ipvlan_addr_busy(): one interface
iterated through all port->ipvlans + ipvlan->addrs
under some ipvlan spinlock, and another added IP
under its own lock. Though this is only possible
for IPv6, since looks like only ipvlan_addr6_event() can be
called without rtnl_lock.
2) Race since ipvlan_ht_addr_add(port) is called under
different ipvlan->addrs_lock locks
This should not affect performance, since add/remove IP
is a rare situation and spinlock is not taken on fast
paths.
Fixes: 8230819494 ("ipvlan: use per device spinlock to protect addrs list updates")
Signed-off-by: Dmitry Skorodumov <skorodumov.dmitry@huawei.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20260112142417.4039566-2-skorodumov.dmitry@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63faf32666 ]
The sizeof_wfhw field wasn't populated in max7360_pwm_ops so it was set
to 0 by default.
While this is ok for now because:
sizeof(struct max7360_pwm_waveform) < PWM_WFHWSIZE
in the future, if struct max7360_pwm_waveform grows, it could lead to
stack corruption.
Fixes: d93a75d94b ("pwm: max7360: Add MAX7360 PWM support")
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://patch.msgid.link/20260113163907.368919-1-richard.genoud@bootlin.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c198b7773c ]
copy_to_user() returns the number of bytes not copied, thus if there is
a problem a positive number. However the ioctl callback is supposed to
return a negative error code on error.
This error is a unfortunate as strictly speaking it became ABI with the
introduction of pwm character devices. However I never saw the issue in
real life -- I found this by code inspection -- and it only affects an
error case where readonly memory is passed to the ioctls or the address
mapping changes while the ioctl is active. Also there are already error
cases returning negative values, so the calling code must be prepared to
see such values already.
Fixes: 9c06f26ba5 ("pwm: Add support for pwmchip devices for faster and easier userspace access")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260119151325.571857-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b47adaab8b ]
In veth_get_ethtool_stats(), some statistics protected by
u64_stats_sync, are read and accumulated in ignorance of possible
u64_stats_fetch_retry() events. These statistics, peer_tq_xdp_xmit and
peer_tq_xdp_xmit_err, are already accumulated by veth_xdp_xmit(). Fix
this by reading them into a temporary buffer first.
Fixes: 5fe6e56776 ("veth: rely on peer veth_rq for ndo_xdp_xmit accounting")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260114122450.227982-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a9bc9e3f4 ]
fou_udp_recv() has the same problem mentioned in the previous
patch.
If FOU_ATTR_IPPROTO is set to 0, skb is not freed by
fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu().
Let's forbid 0 for FOU_ATTR_IPPROTO.
Fixes: 23461551c0 ("fou: Support for foo-over-udp RX path")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260115172533.693652-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c158f985cf ]
On the receive path, packet can be damaged because of buffer
overflow in Rx FIFO. Avoid misleading per-packet error log when
packet->errors is set, this can flood the log. Instead, rely on the
standard rtnl_link_stats64 stats.
Fixes: c5aa9e3b81 ("amd-xgbe: Initial AMD 10GbE platform driver")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260114163037.2062606-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a80c9d945a ]
A null-ptr-deref was reported in the SCTP transmit path when SCTP-AUTH key
initialization fails:
==================================================================
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 0 PID: 16 Comm: ksoftirqd/0 Tainted: G W 6.6.0 #2
RIP: 0010:sctp_packet_bundle_auth net/sctp/output.c:264 [inline]
RIP: 0010:sctp_packet_append_chunk+0xb36/0x1260 net/sctp/output.c:401
Call Trace:
sctp_packet_transmit_chunk+0x31/0x250 net/sctp/output.c:189
sctp_outq_flush_data+0xa29/0x26d0 net/sctp/outqueue.c:1111
sctp_outq_flush+0xc80/0x1240 net/sctp/outqueue.c:1217
sctp_cmd_interpreter.isra.0+0x19a5/0x62c0 net/sctp/sm_sideeffect.c:1787
sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
sctp_do_sm+0x1a3/0x670 net/sctp/sm_sideeffect.c:1169
sctp_assoc_bh_rcv+0x33e/0x640 net/sctp/associola.c:1052
sctp_inq_push+0x1dd/0x280 net/sctp/inqueue.c:88
sctp_rcv+0x11ae/0x3100 net/sctp/input.c:243
sctp6_rcv+0x3d/0x60 net/sctp/ipv6.c:1127
The issue is triggered when sctp_auth_asoc_init_active_key() fails in
sctp_sf_do_5_1C_ack() while processing an INIT_ACK. In this case, the
command sequence is currently:
- SCTP_CMD_PEER_INIT
- SCTP_CMD_TIMER_STOP (T1_INIT)
- SCTP_CMD_TIMER_START (T1_COOKIE)
- SCTP_CMD_NEW_STATE (COOKIE_ECHOED)
- SCTP_CMD_ASSOC_SHKEY
- SCTP_CMD_GEN_COOKIE_ECHO
If SCTP_CMD_ASSOC_SHKEY fails, asoc->shkey remains NULL, while
asoc->peer.auth_capable and asoc->peer.peer_chunks have already been set by
SCTP_CMD_PEER_INIT. This allows a DATA chunk with auth = 1 and shkey = NULL
to be queued by sctp_datamsg_from_user().
Since command interpretation stops on failure, no COOKIE_ECHO should been
sent via SCTP_CMD_GEN_COOKIE_ECHO. However, the T1_COOKIE timer has already
been started, and it may enqueue a COOKIE_ECHO into the outqueue later. As
a result, the DATA chunk can be transmitted together with the COOKIE_ECHO
in sctp_outq_flush_data(), leading to the observed issue.
Similar to the other places where it calls sctp_auth_asoc_init_active_key()
right after sctp_process_init(), this patch moves the SCTP_CMD_ASSOC_SHKEY
immediately after SCTP_CMD_PEER_INIT, before stopping T1_INIT and starting
T1_COOKIE. This ensures that if shared key generation fails, authenticated
DATA cannot be sent. It also allows the T1_INIT timer to retransmit INIT,
giving the client another chance to process INIT_ACK and retry key setup.
Fixes: 730fc3d05c ("[SCTP]: Implete SCTP-AUTH parameter processing")
Reported-by: Zhen Chen <chenzhen126@huawei.com>
Tested-by: Zhen Chen <chenzhen126@huawei.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/44881224b375aa8853f5e19b4055a1a56d895813.1768324226.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79a6d1bfe1 ]
In commit 7352e1d593 ("can: gs_usb: gs_usb_receive_bulk_callback(): fix
URB memory leak"), the URB was re-anchored before usb_submit_urb() in
gs_usb_receive_bulk_callback() to prevent a leak of this URB during
cleanup.
However, this patch did not take into account that usb_submit_urb() could
fail. The URB remains anchored and
usb_kill_anchored_urbs(&parent->rx_submitted) in gs_can_close() loops
infinitely since the anchor list never becomes empty.
To fix the bug, unanchor the URB when an usb_submit_urb() error occurs,
also print an info message.
Fixes: 7352e1d593 ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20260110223836.3890248-1-kuba@kernel.org/
Link: https://patch.msgid.link/20260116-can_usb-fix-reanchor-v1-1-9d74e7289225@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a74c7a58ca ]
In ucc_geth's .mac_config(), we configure the TBI Serdes block represented by a
struct phy_device that we get from firmware.
While porting to phylink, a check was missed to make sure we don't try
to access the TBI PHY if we can't get it. Let's add it and return early
in case of error
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202601130843.rFGNXA5a-lkp@intel.com/
Fixes: 53036aa8d0 ("net: freescale: ucc_geth: phylink conversion")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260114080247.366252-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f5f148dd7 ]
Currently, the test breaks if the SUT already has a default route
configured for IPv6. Fix by avoiding the use of the default namespace.
Fixes: 4ed591c8ab ("net/ipv6: Allow onlink routes to have a device mismatch if it is the default route")
Suggested-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260113-selftests-net-fib-onlink-v2-1-89de2b931389@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d7dbafefb ]
The SR9700 chip sends more than one packet in a USB transaction,
like the DM962x chips can optionally do, but the dm9601 driver does not
support this mode, and the hardware does not have the DM962x
MODE_CTL register to disable it, so this driver drops packets on SR9700
devices. The sr9700 driver correctly handles receiving more than one
packet per transaction.
While the dm9601 driver could be improved to handle this, the easiest
way to fix this issue in the short term is to remove the SR9700 device
ID from the dm9601 driver so the sr9700 driver is always used. This
device ID should not have been in more than one driver to begin with.
The "Fixes" commit was chosen so that the patch is automatically
included in all kernels that have the sr9700 driver, even though the
issue affects dm9601.
Fixes: c9b37458e9 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support")
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://patch.msgid.link/20260113063924.74464-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0386bd321d ]
vsock/virtio common tries to coalesce buffers in rx queue: if a linear skb
(with a spare tail room) is followed by a small skb (length limited by
GOOD_COPY_LEN = 128), an attempt is made to join them.
Since the introduction of MSG_ZEROCOPY support, assumption that a small skb
will always be linear is incorrect. In the zerocopy case, data is lost and
the linear skb is appended with uninitialized kernel memory.
Of all 3 supported virtio-based transports, only loopback-transport is
affected. G2H virtio-transport rx queue operates on explicitly linear skbs;
see virtio_vsock_alloc_linear_skb() in virtio_vsock_rx_fill(). H2G
vhost-transport may allocate non-linear skbs, but only for sizes that are
not considered for coalescence; see PAGE_ALLOC_COSTLY_ORDER in
virtio_vsock_alloc_skb().
Ensure only linear skbs are coalesced. Note that skb_tailroom(last_skb) > 0
guarantees last_skb is linear.
Fixes: 581512a6dc ("vsock/virtio: MSG_ZEROCOPY flag support")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260113-vsock-recv-coalescence-v2-1-552b17837cf4@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ad1b6c1e6 ]
The previous 7 KB per queue caused TX unit hangs under heavy
timestamping load. Reducing to 5 KB avoids these hangs and matches
the TSN recommendation in I225/I226 SW User Manual Section 7.5.4.
The 8 KB "freed" by this change is currently unused. This reduction
is not expected to impact throughput, as the i226 is PCIe-limited
for small TSN packets rather than TX-buffer-limited.
Fixes: 0d58cdc902 ("igc: optimize TX packet buffer utilization for TSN mode")
Reported-by: Zdenek Bouska <zdenek.bouska@siemens.com>
Closes: https://lore.kernel.org/netdev/AS1PR10MB5675DBFE7CE5F2A9336ABFA4EBEAA@AS1PR10MB5675.EURPRD10.PROD.OUTLOOK.COM/
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6990dc392a ]
The current HW bug workaround checks the TXTT_0 ready bit first,
then reads TXSTMPL_0 twice (before and after reading TXSTMPH_0)
to detect whether a new timestamp was captured by timestamp
register 0 during the workaround.
This sequence has a race: if a new timestamp is captured after
checking the TXTT_0 bit but before the first TXSTMPL_0 read, the
detection fails because both the "old" and "new" values come from
the same timestamp.
Fix by reading TXSTMPL_0 first to establish a baseline, then
checking the TXTT_0 bit. This ensures any timestamp captured
during the race window will be detected.
Old sequence:
1. Check TXTT_0 ready bit
2. Read TXSTMPL_0 (baseline)
3. Read TXSTMPH_0 (interrupt workaround)
4. Read TXSTMPL_0 (detect changes vs baseline)
New sequence:
1. Read TXSTMPL_0 (baseline)
2. Check TXTT_0 ready bit
3. Read TXSTMPH_0 (interrupt workaround)
4. Read TXSTMPL_0 (detect changes vs baseline)
Fixes: c789ad7cbe ("igc: Work around HW bug causing missing timestamps")
Suggested-by: Avi Shalev <avi.shalev@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41a9a6826f ]
The Multi-queue Priority (MQPRIO) and Earliest TxTime First (ETF) offloads
utilize the Time Sensitive Networking (TSN) Tx mode. This mode is always
coupled to IEEE 802.1Qbv time aware shaper (Qbv). Therefore, the driver
sets a default Qbv schedule of all gates opened and a cycle time of
1s. This schedule is set during probe.
However, the following sequence of events lead to Tx issues:
- Boot a dual core system
igc_probe():
igc_tsn_clear_schedule():
-> Default Schedule is set
Note: At this point the driver has allocated two Tx/Rx queues, because
there are only two CPUs.
- ethtool -L enp3s0 combined 4
igc_ethtool_set_channels():
igc_reinit_queues()
-> Default schedule is gone, per Tx ring start and end time are zero
- tc qdisc replace dev enp3s0 handle 100 parent root mqprio \
num_tc 4 map 3 3 2 2 0 1 1 1 3 3 3 3 3 3 3 3 \
queues 1@0 1@1 1@2 1@3 hw 1
igc_tsn_offload_apply():
igc_tsn_enable_offload():
-> Writes zeros to IGC_STQT(i) and IGC_ENDQT(i), causing Tx to stall/fail
Therefore, restore the default Qbv schedule after changing the number of
channels.
Furthermore, add a restriction to not allow queue reconfiguration when
TSN/Qbv is enabled, because it may lead to inconsistent states.
Fixes: c814a2d2d4 ("igc: Use default cycle 'start' and 'end' values for queues")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01139a2ce5 ]
The commit 5f6df173f9 ("ice: implement and use rd32_poll_timeout for
ice_sq_done timeout") converted ICE_CTL_Q_SQ_CMD_TIMEOUT from jiffies
to microseconds.
But the ice_release_res() function was missed, and its logic still
treats ICE_CTL_Q_SQ_CMD_TIMEOUT as a jiffies value.
So correct the issue by usecs_to_jiffies().
Found by inspection of the DDP downloading process.
Compile and modprobe tested only.
Fixes: 5f6df173f9 ("ice: implement and use rd32_poll_timeout for ice_sq_done timeout")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9d45c22ed ]
When the user issues an administrative down to an interface that is the
primary for an aggregate bond, the prune lists are being purged. This
breaks communication to the secondary interface, which shares a prune
list on the main switch block while bonded together.
For the primary interface of an aggregate, avoid deleting these prune
lists during stop, and since they are hardcoded to specific values for
the default vlan and QinQ vlans, the attempt to re-add them during the
up phase will quietly fail without any additional problem.
Fixes: 1e0f9881ef ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8439016c3b ]
The u64_stats_sync structure is empty on 64-bit systems. However, on 32-bit
systems it contains a seqcount_t which needs to be initialized. While the
memory is zero-initialized, a lack of u64_stats_init means that lockdep
won't get initialized properly. Fix this by adding u64_stats_init() calls
to the rings just after allocation.
Fixes: 2b245cb294 ("ice: Implement transmit and NAPI support")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3170757210 ]
Wrong P2P device link id value of 0 was introduced in ath12k_mac_op_tx() by [1].
During the P2P negotiation process, there is only one scan vdev with link ID 15.
Currently, the device link ID is incorrectly set to 0 in ath12k_mac_op_tx()
during the P2P negotiation process, which leads to TX failures.
Set the correct P2P device link ID to 15 to fix the TX failure issue.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: 648a121baf ("wifi: ath12k: ath12k_mac_op_tx(): MLO support") # [1]
Signed-off-by: Yingying Tang <yingying.tang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Cc: linux-next@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://patch.msgid.link/20260113054636.2620035-1-yingying.tang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
[ Upstream commit f88e9fc30a ]
Commit [1] converted the management transmission work item into a
wiphy work. Since a wiphy work can only run under wiphy lock
protection, a race condition happens in below scenario:
1. a management frame is queued for transmission.
2. ath12k_mac_op_flush() gets called to flush pending frames associated
with the hardware (i.e, vif being NULL). Then in ath12k_mac_flush()
the process waits for the transmission done.
3. Since wiphy lock has been taken by the flush process, the transmission
work item has no chance to run, hence the dead lock.
>From user view, this dead lock results in below issue:
wlp8s0: authenticate with xxxxxx (local address=xxxxxx)
wlp8s0: send auth to xxxxxx (try 1/3)
wlp8s0: authenticate with xxxxxx (local address=xxxxxx)
wlp8s0: send auth to xxxxxx (try 1/3)
wlp8s0: authenticated
wlp8s0: associate with xxxxxx (try 1/3)
wlp8s0: aborting association with xxxxxx by local choice (Reason: 3=DEAUTH_LEAVING)
ath12k_pci 0000:08:00.0: failed to flush mgmt transmit queue, mgmt pkts pending 1
The dead lock can be avoided by invoking wiphy_work_flush() to proactively
run the queued work item. Note actually it is already present in
ath12k_mac_op_flush(), however it does not protect the case where vif
being NULL. Hence move it ahead to cover this case as well.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: 56dcbf0b52 ("wifi: ath12k: convert struct ath12k::wmi_mgmt_tx_work to struct wiphy_work") # [1]
Reported-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220959
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260113-ath12k-fix-dead-lock-while-flushing-v1-1-9713621f3a0f@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
