Move the `debug_exception_enter()` and `debug_exception_exit()`
functions from mm/fault.c, as they are needed to split
the debug exceptions entry paths from the current unified one.
Make them externally visible in include/asm/exception.h until
the caller in mm/fault.c is cleaned up.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-7-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Remove all infrastructure for the dynamic registration previously used by
software breakpoints and stepping handlers.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-6-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Software stepping checks for the correct handler by iterating over a list
of dynamically registered handlers and calling all of them until one
handles the exception.
This is the only generic way to handle software stepping handlers in arm64
as the exception does not provide an immediate that could be checked,
contrary to software breakpoints.
However, the registration mechanism is not exported and has only
two current users : the KGDB stepping handler, and the uprobe single step
handler.
Given that one comes from user mode and the other from kernel mode, call
the appropriate one by checking the source EL of the exception.
Add a stand-in that returns DBG_HOOK_ERROR when the configuration
options are not enabled.
Remove `arch_init_uprobes()` as it is not useful anymore and is
specific to arm64.
Unify the naming of the handler to XXX_single_step_handler(), making it
clear they are related.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-5-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Software breakpoints pass an immediate value in ESR ("comment") that can
be used to call a specialized handler (KGDB, KASAN...).
We do so in two different ways :
- During early boot, `early_brk64` statically checks against known
immediates and calls the corresponding handler,
- During init, handlers are dynamically registered into a list. When
called, the generic software breakpoint handler will iterate over
the list to find the appropriate handler.
The dynamic registration does not provide any benefit here as it is not
exported and all its uses are within the arm64 tree. It also depends on an
RCU list, whose safe access currently relies on the non-preemptible state
of `do_debug_exception`.
Replace the list iteration logic in `call_break_hooks` to call
the breakpoint handlers statically if they are enabled, like in
`early_brk64`.
Expose the handlers in their respective headers to be reachable from
`arch/arm64/kernel/debug-monitors.c` at link time.
Unify the naming of the software breakpoint handlers to XXX_brk_handler(),
making it clear they are related and to differentiate from the
hardware breakpoints.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-4-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
`aarch32_break_handler()` is called in `do_el0_undef()` when we
are trying to handle an exception whose Exception Syndrome is unknown.
It checks if the instruction hit might be a 32-bit arm break (be it
A32 or T2), and sends a SIGTRAP to userspace if it is so that it can
be handled.
However, this is badly represented in the naming of the function, and
is not consistent with the other functions called with the same logic
in `do_el0_undef()`.
Rename it `try_handle_aarch32_break()` and change the return value to
a boolean to align with the logic of the other tentative handlers in
`do_el0_undef()`, the previous error code being ignored anyway.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250707114109.35672-3-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Remove the unnecessary boolean which always checks if the handler was found
and return early instead.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250707114109.35672-2-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Document uses only single whitespace after full stop, so fix
inconsistency.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250707095019.66792-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Devicetree bindings are supposed to be specific in terms of compatibles
and other properties. Short "specific" has many implications, so extend
the description to cover them:
1. Mention no family names and avoid generic SoC fallbacks in
compatible. The list grew, mixing DO's and DON'T's, so split it into
multiple items.
2. No properties implied by the compatible.
3. Document desired lack of ABI impact and acceptable solution if such
needs arises: clearly marking it in commit msg.
All above follows established Devicetree bindings maintainers review
practice, so no new rules in practice are introduced here.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250707095019.66792-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
When speaking about compatibles for new devices comparing to "prior
implementations", usually we expect new device to come with more
features, thus logically it is a superset, not subset, of "prior
implementations".
Suggested-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250707095019.66792-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
drm/i915 feature pull #2 for v6.17:
Features and functionality:
- Add drm_panic support for both i915 and xe drivers (Jocelyn Falempe)
- Add initial flip queue implementation, disabled by default, for LNL and PTL
(Ville)
- Add support for Wildcat Lake (WCL) display, version 30.02 (Matt Roper, Matt
Atwood, Dnyaneshwar)
- Extend drm_panel and follower support to DDI eDP (Arun)
Refactoring and cleanups:
- Make all global state objects opaque (Jani)
- Move display works to display specific unordered workqueue (Luca)
- Add and use struct drm_device based pcode interface (Jani, Lucas)
- Use clamp() instead of max()+min() combo (Ankit)
- Simplify wait for power well disable (Jani)
- Various stylistics cleanups and renames (Jani)
Fixes:
- Deal with loss of pipe DMC state (Ville)
- Fix PTL HDCP2 stream status check (Suraj)
- Add workaround for ADL-P DKL PHY DP and HDMI (Nemesa)
- Fix skl_print_wm_changes() stack usage with KMSAN (Arnd Bergmann)
- Fix PCON capability reads on non-branch devices (Chaitanya)
- Fix which platforms have ultra joiner (Ankit)
DRM core changes:
- Add ttm_bo_kmap_try_from_panic() for xe drm_panic support (Jocelyn Falempe)
- Add private pointer to struct drm_scanout buffer for xe/i915 drm_panic support
(Jocelyn Falempe)
Merges:
- Backmerge drm-next for drm_panel and xe changes (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6d728bf6ef23681b00dfbc7da9aeae41042dee02@intel.com
And use bt_file for both bdev and shmem backed buftargs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The extra bdev_ is weird, so drop it. Also improve the comment to make
it clear these are the hardware limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
This function and the helpers used by it duplicate the same logic for AGs
and RTGs. Use the xfs_group_type enum to unify both variants.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Generalize the xfs_group_type helper in the discard code to return a buftarg
and move it to xfs_mount.h, and use the result in xfs_dax_notify_dev_failure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
This extra call is not needed as xfs_alloc_buftarg already calls
sync_blockdev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The initial sb read is always for a device logical block size buffer.
The device logical block size is provided in the bt_logical_sectorsize in
struct buftarg, so use that instead of the confusingly named
xfs_getsize_buftarg buffer that reads it from the bdev.
Update the comments surrounding the code to better describe what is going
on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
This reverts commit f75a2804da.
With all states (whether user or kern) removed from the hashtables
during deletion, there's no need for synchronous destruction of
states. xfrm6_tunnel states still need to have been destroyed (which
will be the case when its last user is deleted (not destroyed)) so
that xfrm6_tunnel_free_spi removes it from the per-netns hashtable
before the netns is destroyed.
This has the benefit of skipping one synchronize_rcu per state (in
__xfrm_state_destroy(sync=true)) when we exit a netns.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The ipcomp fallback tunnels currently get deleted (from the various
lists and hashtables) as the last user state that needed that fallback
is destroyed (not deleted). If a reference to that user state still
exists, the fallback state will remain on the hashtables/lists,
triggering the WARN in xfrm_state_fini. Because of those remaining
references, the fix in commit f75a2804da ("xfrm: destroy xfrm_state
synchronously on net exit path") is not complete.
We recently fixed one such situation in TCP due to defered freeing of
skbs (commit 9b6412e697 ("tcp: drop secpath at the same time as we
currently drop dst")). This can also happen due to IP reassembly: skbs
with a secpath remain on the reassembly queue until netns
destruction. If we can't guarantee that the queues are flushed by the
time xfrm_state_fini runs, there may still be references to a (user)
xfrm_state, preventing the timely deletion of the corresponding
fallback state.
Instead of chasing each instance of skbs holding a secpath one by one,
this patch fixes the issue directly within xfrm, by deleting the
fallback state as soon as the last user state depending on it has been
deleted. Destruction will still happen when the final reference is
dropped.
A separate lockdep class for the fallback state is required since
we're going to lock x->tunnel while x is locked.
Fixes: 9d4139c769 ("netns xfrm: per-netns xfrm_state_all list")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
tc_action_net_exit() got an rtnl exclusion in commit
a159d3c4b8 ("net_sched: acquire RTNL in tc_action_net_exit()")
Since then, commit 16af606739 ("net: sched: implement reference
counted action release") made this RTNL exclusion obsolete for
most cases.
Only tcf_action_offload_del() might still require it.
Move the rtnl locking into tcf_idrinfo_destroy() when
an offload action is found.
Most netns do not have actions, yet deleting them is adding a lot
of pressure on RTNL, which is for many the most contended mutex
in the kernel.
We are moving to a per-netns 'rtnl', so tc_action_net_exit()
will not be able to grab 'rtnl' a single time for a batch of netns.
Before the patch:
perf probe -a rtnl_lock
perf record -e probe:rtnl_lock -a /bin/bash -c 'unshare -n "/bin/true"; sleep 1'
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.305 MB perf.data (25 samples) ]
After the patch:
perf record -e probe:rtnl_lock -a /bin/bash -c 'unshare -n "/bin/true"; sleep 1'
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.304 MB perf.data (9 samples) ]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Buslov <vladbu@nvidia.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://patch.msgid.link/20250702071230.1892674-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jeremy Kerr says:
====================
net: mctp: Add support for gateway routing
This series adds a gateway route type for the MCTP core, allowing
non-local EIDs as the match for a route.
Example setup using the mctp tools:
mctp route add 9 via mctpi2c0
mctp neigh add 9 dev mctpi2c0 lladdr 0x1d
mctp route add 10 gw 9
- will route packets to eid 10 through mctpi2c0, using a dest lladdr
of 0x1d (ie, that of the directly-attached eid 9).
The core change to support this is the introduction of a struct
mctp_dst, which represents the result of a route lookup. Since this
involves a bit of surgery through the routing code, we add a few tests
along the way.
We're introducing an ABI change in the new RTM_{NEW,GET,DEL}ROUTE
netlink formats, with the support for a RTA_GATEWAY attribute. Because
we need a network ID specified to fully-qualify a gateway EID, the
RTA_GATEWAY attribute carries the (net, eid) tuple in full:
struct mctp_fq_addr {
unsigned int net;
mctp_eid_t eid;
}
Of course, any questions, comments etc are most welcome.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
====================
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-0-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a few kunit tests for the gateway routing. Because we have multiple
route types now (direct and gateway), rename mctp_test_create_route to
mctp_test_create_route_direct, and add a _gateway variant too.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-14-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change allows for gateway routing, where a route table entry
may reference a routable endpoint (by network and EID), instead of
routing directly to a netdevice.
We add support for a RTM_GATEWAY attribute for netlink route updates,
with an attribute format of:
struct mctp_fq_addr {
unsigned int net;
mctp_eid_t eid;
}
- we need the net here to uniquely identify the target EID, as we no
longer have the device reference directly (which would provide the net
id in the case of direct routes).
This makes route lookups recursive, as a route lookup that returns a
gateway route must be resolved into a direct route (ie, to a device)
eventually. We provide a limit to the route lookups, to prevent infinite
loop routing.
The route lookup populates a new 'nexthop' field in the dst structure,
which now specifies the key for the neighbour table lookup on device
output, rather than using the packet destination address directly.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-13-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The netlink route parsing functions end up setting a bunch of output
variables from the rt attributes. This will get messy when the routes
become more complex.
So, split the rt parsing into two types: a lookup (returning route
target data suitable for a route lookup, like when deleting a route) and
a populate (setting fields of a struct mctp_route).
In doing this, we need to separate the route allocation from
mctp_route_add, so add some comments on the lifetime semantics for the
latter.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-12-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In upcoming changes, a route may not have a device associated. Since the
route is matched on the (network, eid) tuple, pass the netid itself into
mctp_route_remove.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-11-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Recent changes have modified the extaddr path a little, so add a couple
of kunit tests to af-mctp.c. These check that we're correctly passing
lladdr data between sendmsg/recvmsg and the routing layer.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-9-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Upcoming tests will check semantics of hardware addressing, which
require a dev with ->addr_len != 0. Add a constructor to create a
MCTP interface using a physically-addressed bus type.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-5-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we have the dst->haddr populated by sendmsg (when extended
addressing is in use), we no longer need to stash the link-layer address
in the skb->cb.
Instead, only use skb->cb for incoming lladdr data.
While we're at it: remove cb->src, as was never used.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-4-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change adds a struct mctp_dst, representing the result of a routing
lookup. This decouples the struct mctp_route from the actual
implementation of a routing operation.
This will allow for future routing changes which may require more
involved lookup logic, such as gateway routing - which may require
multiple traversals of the routing table.
Since we only use the struct mctp_route at lookup time, we no longer
hold routes over a routing operation, as we only need it to populate the
dst. However, we do hold the dev while the dst is active.
This requires some changes to the route test infrastructure, as we no
longer have a mock route to handle the route output operation, and
transient dsts are created by the routing code, so we can't override
them as easily.
Instead, we use kunit->priv to stash a packet queue, and a custom
dst_output function queues into that packet queue, which we can use for
later expectations.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-3-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In our input_cloned_frag test, we currently allocate our test buffers
arbitrarily-sized at 100 bytes.
We only expect to receive a max of 15 bytes from the socket, so reduce
to a more appropriate size. There are some upcoming changes to the
routing code which hit a frame-size limit on s390, so reduce the usage
before that lands.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-2-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the output path, only check the skb->cb data when we know it's from
a local socket; input packets will have source address information there
instead.
In order to detect when we're forwarding, set skb->pkt_type on
input/output.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-1-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On some models supported by ideapad-laptop, the HW/FW can remember the
state of keyboard backlight among boots. However, it is always turned
off while shutting down, as a side effect of the LED class device
unregistering sequence.
This is inconvenient for users who always prefer turning on the
keyboard backlight. Thus, set LED_RETAIN_AT_SHUTDOWN on the LED class
device so that the state of keyboard backlight gets remembered, which
also aligns with the behavior of manufacturer utilities on Windows.
Fixes: 503325f84b ("platform/x86: ideapad-laptop: add keyboard backlight control support")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250707163808.155876-3-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On devices supported by ideapad-laptop, the HW/FW can remember the
FnLock state among boots. However, since the introduction of the FnLock
LED class device, it is turned off while shutting down, as a side effect
of the LED class device unregistering sequence.
Many users always turn on FnLock because they use function keys much
more frequently than multimedia keys. The behavior change is
inconvenient for them. Thus, set LED_RETAIN_AT_SHUTDOWN on the LED class
device so that the FnLock state gets remembered, which also aligns with
the behavior of manufacturer utilities on Windows.
Fixes: 07f48f668f ("platform/x86: ideapad-laptop: add FnLock LED class device")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250707163808.155876-2-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Expanded Serial Peripheral Interface (XSPI) clock DT binding definitions
for the Renesas RZ/V2N (R9A09G056) and RZ/V2H (R9A09G057) SoCs, shared
by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaGV+YgAKCRCKwlD9ZEnx
cJ6pAQDjh4Bffd3ycrQvr02Ra/tBXMI+Vpdyk/AtZV60gecNNQD5AXgJ063OZa44
/wVWQV+r6bRx0N6aDANKpwkpqvJZ5Q4=
=wJ5M
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a09g057-dt-binding-defs-tag4' into renesas-dts-for-v6.17
Renesas RZ/V2N and RZ/V2H XSPI Clock DT Binding Definitions
Expanded Serial Peripheral Interface (XSPI) clock DT binding definitions
for the Renesas RZ/V2N (R9A09G056) and RZ/V2H (R9A09G057) SoCs, shared
by driver and DT source files.
Renesas Kconfig is using "SoC serial number" for CONFIG symbol, but is
using "SoC chip name" for menu description. Because of it, it looks
random order when we run "make menuconfig".
commit 6d5aded8d5 ("soc: renesas: Sort driver description title")
sorted Renesas Kconfig by menu description title order, but it makes
confusable to add new config.
Let's unify "ARMxx Platform support for ${CHIP_NUMBER} (${CHIP_NAME}),
and sort it again.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/877c0xhk3z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use memcpy() in place of strncpy() in __xfs_xattr_put_listent().
The length is known and a null byte is added manually.
No functional change intended.
Signed-off-by: Pranav Tyagi <pranav.tyagi03@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
RZ/G3E SMARC EVK has 3 user buttons called USER_SW1, USER_SW2 and
USER_SW3 and SLEEP button with NMI support. Add a DT node in device tree
to instantiate the gpio-keys driver for these buttons.
The system can enter into STR state by pressing the sleep button and
wakeup from STR is done by pressing power button. The USER_SW{1,2,3}
configured as wakeup-source, so it can wakeup the system during s2idle.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250702092755.70847-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
If MSTOP is not added for both clocks in a coupled pair, and the clocks
are not disabled in the reverse order of their enable sequence, the MSTOP
may remain enabled when disabling the clocks.
This happens because rzg2l_mod_clock_endisable() executes for coupled
clocks only when a single clock from the pair is enabled. If one clock has
no MSTOP defined, it can result in the MSTOP configuration being left
active when the clocks are disabled out of order (i.e., not in the reverse
order of enabling).
Fixes: c496959527 ("clk: renesas: r9a08g045: Drop power domain instantiation")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250704134328.3614317-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add clock and reset entries for the Gigabit Ethernet Interfaces (GBETH 0-1)
IPs found on the RZ/G3E SoC. This includes various PLLs, dividers, and mux
clocks needed by these two GBETH IPs.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250702005706.1200059-2-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
