Add const qualifier to struct ad7091r_init_info ad7091r*_init_info. This
is read-only data so it can be made const.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250628-iio-const-data-4-v1-1-4e0f93c9cf83@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add const qualifier to struct ad7091r_init_info ad7091r5_init_info. This
is read-only data so it can be made const.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250628-iio-const-data-3-v1-1-13d3f0af5f3f@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Allow clocks property to fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dtb: adc@40048000 (nxp,lpc3220-adc): 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250624201302.2515391-1-Frank.Li@nxp.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for 3-wire configuration within the driver.
By default 4-wire configuration is used.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250626104024.8645-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use devm_clk_get_enabled() instead of devm_clk_get(),
clk_prepare_enable(), devm_add_action_or_reset() to simplify the
code as it effectively does the same thing.
We can also drop ext_clk from struct ad7173_state since it is not used
anywhere else.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250620-iio-adc-ad7173-simplify-clock-enable-disable-v1-1-8bc693b190ec@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for generating events when the step counter reaches the
configurable watermark.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Link: https://patch.msgid.link/20250616-bmi270-events-v3-2-16e37588604f@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a channel for enabling/disabling the step counter, reading the
number of steps and resetting the counter.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Link: https://patch.msgid.link/20250616-bmi270-events-v3-1-16e37588604f@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
sys_futex_wait() expects a struct __kernel_timespec pointer for the
timeout, but the provided struct timespec pointer is of type struct
old_timespec32 when compiled for 32-bit architectures, unless they use
64-bit timespecs already.
Make it work for all variants by converting the provided timespec value
into a local struct __kernel_timespec and provide a pointer to it to the
syscall. This is a pointless operation for 64-bit, but this is not a
hotpath operation, so keep it simple.
This fix is based off [1]
Originally-by: Wei Gao <wegao@suse.com>
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250704190234.14230-1-terry.tritton@linaro.org
Link: https://lore.kernel.org/all/20231203235117.29677-1-wegao@suse.com/ [1]
When an error is encountered by printf() it needs to be reported.
errno() is already set by the callback.
sprintf() is different, but that keeps working and is already tested.
Also add a new test.
Fixes: 7e4346f4a3 ("tools/nolibc/stdio: add a minimal [vf]printf() implementation")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250704-nolibc-printf-error-v1-2-74b7a092433b@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20250704075455.3222438-1-sakari.ailus@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20250704075500.3222950-1-sakari.ailus@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make several autosuspend functions mark last busy stamp and update
the documentation accordingly (Sakari Ailus).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmhjrvQSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1aigIAKypscFSfd/WsAlP4orLtd4xiLi7KQHa
NrOYv7sZBVHgx4S9BGqHavYM3qhOBH5qCg+yBtqb8v6vp/TIlJjF2v3+C8uAXAnl
9GI5Gc6sZp/lMhf5Vb4Ibf58/P9lg4A7mIvM+LtfeEUMTlRrp47Q/RQ0ah7S4tDj
rFyC92QmBnkDLoyQp5IbCWkdjlqGgyTZzz/+XnfV9fWwX1aiXqaB4EZ2nXSAlyBx
awvA4/t662SWlHsdQqll9vS/+ZB39LEWwa1jJ7XGIK8t6GSH+TTys3S9/PHR/ua3
Dlcd+14plDGlSOy97hY+z6NdSgxH/qcpRgFduu5KwVqEwo2fqNkeV9Q=
=pFYw
-----END PGP SIGNATURE-----
Merge tag 'pm-runtime-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into for-next
Runtime PM updates related to autosuspend for 6.17
Make several autosuspend functions mark last busy stamp and update
the documentation accordingly (Sakari Ailus).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
add firmware information in the .modinfo section, so that userspace
tools can find out firmware required by cs35l41/cs35l56 kernel module
Signed-off-by: GalaxySnail <me@glxys.nl>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250624101716.2365302-2-me@glxys.nl
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Device name start from bus name, as we use strstarts()
to do compare, need add it for TXNW2781 device.
Fixes: b2904df0a3 ("ALSA: hda/tas2781: Add compatible for hardware id TIAS2781 and TXNW2781")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250705025333.24346-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
futex_numa was never added to the .gitignore file.
Add it.
Fixes: 9140f57c1c ("futex,selftests: Add another FUTEX2_NUMA selftest")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/all/20250704103749.10341-1-terry.tritton@linaro.org
hns_roce_clear_extdb_list_info() will eventually do some HW
configurations through FW, and they need to be cleared by
calling hns_roce_function_clear() when the initialization
fails.
Fixes: 7e78dd816e ("RDMA/hns: Clear extended doorbell info before using")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250703113905.3597124-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Enable compilation of the new rtw89_8852bu module.
Tested mostly in station mode, and a little bit in AP mode.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/627e9e92-6f10-45de-a340-19b10d7bad82@gmail.com
This is the entry point for the new rtw89_8852bu module.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/bac25b31-8146-4738-b8f2-eba66c51f3d8@gmail.com
"hfc" means "hci fc" which is "Host Control Interface Flow Control".
These are some parameters needed for RTL8852BU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/40dd1597-27d8-4316-ac3b-4bf7ff9f3e2f@gmail.com
"dle" could be "Data Link Engine" or "Double Link Engine". These are
some parameters needed for RTL8852BU.
In this case the same parameters are used for USB 2 and USB 3.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/7224021b-4fb5-44bc-aeb1-3a6fd3625f2a@gmail.com
There are a few differences in the power on/off functions between PCIE
and USB. The changes in the power off function in particular are needed
for the RTL8832BU to be able to power on again after it's powered off.
While the RTL8832BU appears to work without the changes in the power on
function, it's probably best to implement them, in case they are needed
in some situations.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/c12da54f-88e6-4b11-8587-36f9cac13bf3@gmail.com
Make __rtw8852bx_read_efuse() accept USB devices and load the MAC
address from the correct offset.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/1f58d168-67a9-4d86-9e6a-73789c7a59f4@gmail.com
-----BEGIN PGP SIGNATURE-----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=rrCJ
-----END PGP SIGNATURE-----
Merge tag 'v6.16-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Two reconnect fixes including one for a reboot/reconnect race
- Fix for incorrect file type that can be returned by SMB3.1.1 POSIX
extensions
- tcon initialization fix
- Fix for resolving Windows symlinks with absolute paths
* tag 'v6.16-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix native SMB symlink traversal
smb: client: fix race condition in negotiate timeout by using more precise timing
cifs: all initializations for tcon should happen in tcon_info_alloc
smb: client: fix warning when reconnecting channel
smb: client: fix readdir returning wrong type with POSIX extensions
When driver is built with either CONFIG_DRM_I2C_ADV7511_AUDIO or
CONFIG_DRM_I2C_ADV7511_CEC disabled, drm_bridge_connector_init() is
expected to fail with -EINVAL. That is because all required audio (or
CEC) related callbacks in adv7511_bridge_funcs ended up being NULL.
Set DRM_BRIDGE_OP_HDMI_AUDIO and DRM_BRIDGE_OP_HDMI_CEC_ADAPTER bridge
ops only when the aforementioned kernel config options have been
enabled.
Fixes: ae01d3183d ("drm/bridge: adv7511: switch to the HDMI connector helpers")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250704-adv7511-bridge-ops-fix-v1-1-c1385922066e@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Correct the kernel-doc comment for DRM_BRIDGE_OP_HDMI_CEC_ADAPTER member
of enum drm_bridge_ops. This seems to be just a copy-paste artifact
from DRM_BRIDGE_OP_HDMI_CEC_NOTIFIER above.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250704-drm-bridge-kdoc-fix-v1-1-b08c67212851@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
KMS-only drivers should only allocate dumb buffers. The driver custom
ioctls are only meant for the usermode gpu driver (mesa), and not for
general consumption, so they don't make sense for standalone KMS
drivers.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662598/
Avoid the possibility of missing features between the split and unified
drm driver cases by defining DRIVER_FEATURES_GPU / KMS and using those
in the drm_driver initializations.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662595/
Fix btree node read retries after validate errors:
__btree_err() is the wrong place to flag a topology error: that is done
by btree_lost_data().
Additionally, some calls to bch2_bkey_pick_read_device() were not
updated in the 6.16 rework for improved log messages; we were failing to
signal that we still had a retry.
Cc: Nikita Ofitserov <himikof@gmail.com>
Cc: Alan Huang <mmpgouride@gmail.com>
Reported-and-tested-by: Edoardo Codeglia <bcachefs@404.blue>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, btree node scan used the btree node cache to check if btree
nodes were readable, but this is subject to interference from threads
scanning different devices trying to read the same node - and more
critically, nodes that we already attempted and failed to read before
kicking off scan.
Instead, we now allocate a 'struct btree' that does not live in the
btree node cache, and call bch2_btree_node_read_done() directly.
Cc: Nikita Ofitserov <himikof@gmail.com>
Reviewed-by: Nikita Ofitserov <himikof@gmail.com>
Reported-and-tested-by: Edoardo Codeglia <bcachefs@404.blue>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There are cases when we want to have separate DRM devices for GPU and
display pipelines.
One example is development, when it is beneficial to be able to bind the
GPU driver separately, without the display pipeline (and without the
hacks adding "amd,imageon" to the compatible string).
Another example is some of Qualcomm platforms, which have two MDSS
units, but only one GPU. With current approach it is next to impossible
to support this usecase properly, while separate binding allows users to
have three DRM devices: two for MDSS units and a single headless GPU.
Add kernel param msm.separate_gpu_kms, which if set to true forces
creation of separate display and GPU DRM devices. Mesa supports this
setup by using the kmsro wrapper.
The param is disabled by default, in order to be able to test userspace
for the compatibility issues. Simple clients are able to handle this
setup automatically.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662590/
[Rob: renamed the modparam to separate_gpu_kms, and add missing
DRIVER_GEM_GPUVA]
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Currently the msm driver creates an extra interim platform device for
Imageon GPUs. This is not ideal, as the device doesn't have
corresponding OF node. If the headless mode is used for newer GPUs, then
the msm_use_mmu() function can not detect corresponding IOMMU devices.
Also the DRM device (although it's headless) is created with modesetting
flags being set.
To solve all these issues, rework the way the Imageon devices are bound.
Remove the interim device, don't register a component and instead use a
cut-down version of the normal functions to probe or remove the driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662584/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Move symbol selection to be more fine grained: select DP helpers only if
DP driver is also enabled, move KMS and display helpers to the newly
introduced DRM_MSM_KMS.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662589/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
