Function msm_ioctl_gem_info_set_metadata() now checks for krealloc
failure and returns -ENOMEM, avoiding potential NULL pointer dereference.
Explicitly avoids __GFP_NOFAIL due to deadlock risks and allocation constraints.
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Patchwork: https://patchwork.freedesktop.org/patch/661235/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Add support for Adreno X1-45 GPU present Snapdragon X1P42100
series of compute chipsets. This GPU is a smaller version of
X1-85 GPU with lower core count and smaller internal memories.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Tested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> # x1-26-100
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660217/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
In some cases, an OPP may have multiple variants to describe the
differences in the resources between SKUs. As an example, we may
want to vote different peak bandwidths in different SKUs for the
same frequency and the OPP node names can have an additional
integer suffix to denote this difference like below:
opp-666000000-0 {
opp-hz = /bits/ 64 <666000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
opp-peak-kBps = <8171875>;
qcom,opp-acd-level = <0xa82d5ffd>;
opp-supported-hw = <0xf>;
};
/* Only applicable for SKUs which has 666Mhz as Fmax */
opp-666000000-1 {
opp-hz = /bits/ 64 <666000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
opp-peak-kBps = <16500000>;
qcom,opp-acd-level = <0xa82d5ffd>;
opp-supported-hw = <0x10>;
};
Update the regex to allow this usecase.
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> # x1-26-100
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660213/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Update the RPMH level definitions to include TURBO_L5 corner.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/661840/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Add the speedbin table to the X1-85's entry in the catalogue to
enable SKU detection.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/661837/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Pull in igt updates that are a dependency for VM_BIND, and will reduce
msm_mapping flakes.
Skip msm_mapping@memptrs on sc7180 (the test should be checking for
preemption support, and skipping if it is not supported).
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/77
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662524/
Make fscrypt no longer use Crypto API drivers for non-inline crypto
engines, even when the Crypto API prioritizes them over CPU-based code
(which unfortunately it often does). These drivers tend to be really
problematic, especially for fscrypt's workload. This commit has no
effect on inline crypto engines, which are different and do work well.
Specifically, exclude drivers that have CRYPTO_ALG_KERN_DRIVER_ONLY or
CRYPTO_ALG_ALLOCATES_MEMORY set. (Later, CRYPTO_ALG_ASYNC should be
excluded too. That's omitted for now to keep this commit backportable,
since until recently some CPU-based code had CRYPTO_ALG_ASYNC set.)
There are two major issues with these drivers: bugs and performance.
First, these drivers tend to be buggy. They're fundamentally much more
error-prone and harder to test than the CPU-based code. They often
don't get tested before kernel releases, and even if they do, the crypto
self-tests don't properly test these drivers. Released drivers have
en/decrypted or hashed data incorrectly. These bugs cause issues for
fscrypt users who often didn't even want to use these drivers, e.g.:
- https://github.com/google/fscryptctl/issues/32
- https://github.com/google/fscryptctl/issues/9
- https://lore.kernel.org/r/PH0PR02MB731916ECDB6C613665863B6CFFAA2@PH0PR02MB7319.namprd02.prod.outlook.com
These drivers have also similarly caused issues for dm-crypt users,
including data corruption and deadlocks. Since Linux v5.10, dm-crypt
has disabled most of them by excluding CRYPTO_ALG_ALLOCATES_MEMORY.
Second, these drivers tend to be *much* slower than the CPU-based code.
This may seem counterintuitive, but benchmarks clearly show it. There's
a *lot* of overhead associated with going to a hardware driver, off the
CPU, and back again. To prove this, I gathered as many systems with
this type of crypto engine as I could, and I measured synchronous
encryption of 4096-byte messages (which matches fscrypt's workload):
Intel Emerald Rapids server:
AES-256-XTS:
xts-aes-vaes-avx512 16171 MB/s [CPU-based, Vector AES]
qat_aes_xts 289 MB/s [Offload, Intel QuickAssist]
Qualcomm SM8650 HDK:
AES-256-XTS:
xts-aes-ce 4301 MB/s [CPU-based, ARMv8 Crypto Extensions]
xts-aes-qce 73 MB/s [Offload, Qualcomm Crypto Engine]
i.MX 8M Nano LPDDR4 EVK:
AES-256-XTS:
xts-aes-ce 647 MB/s [CPU-based, ARMv8 Crypto Extensions]
xts(ecb-aes-caam) 20 MB/s [Offload, CAAM]
AES-128-CBC-ESSIV:
essiv(cbc-aes-caam,sha256-lib) 23 MB/s [Offload, CAAM]
STM32MP157F-DK2:
AES-256-XTS:
xts-aes-neonbs 13.2 MB/s [CPU-based, ARM NEON]
xts(stm32-ecb-aes) 3.1 MB/s [Offload, STM32 crypto engine]
AES-128-CBC-ESSIV:
essiv(cbc-aes-neonbs,sha256-lib)
14.7 MB/s [CPU-based, ARM NEON]
essiv(stm32-cbc-aes,sha256-lib)
3.2 MB/s [Offload, STM32 crypto engine]
Adiantum:
adiantum(xchacha12-arm,aes-arm,nhpoly1305-neon)
52.8 MB/s [CPU-based, ARM scalar + NEON]
So, there was no case in which the crypto engine was even *close* to
being faster. On the first three, which have AES instructions in the
CPU, the CPU was 30 to 55 times faster (!). Even on STM32MP157F-DK2
which has a Cortex-A7 CPU that doesn't have AES instructions, AES was
over 4 times faster on the CPU. And Adiantum encryption, which is what
actually should be used on CPUs like that, was over 17 times faster.
Other justifications that have been given for these non-inline crypto
engines (almost always coming from the hardware vendors, not actual
users) don't seem very plausible either:
- The crypto engine throughput could be improved by processing
multiple requests concurrently. Currently irrelevant to fscrypt,
since it doesn't do that. This would also be complex, and unhelpful
in many cases. 2 of the 4 engines I tested even had only one queue.
- Some of the engines, e.g. STM32, support hardware keys. Also
currently irrelevant to fscrypt, since it doesn't support these.
Interestingly, the STM32 driver itself doesn't support this either.
- Free up CPU for other tasks and/or reduce energy usage. Not very
plausible considering the "short" message length, driver overhead,
and scheduling overhead. There's just very little time for the CPU
to do something else like run another task or enter low-power state,
before the message finishes and it's time to process the next one.
- Some of these engines resist power analysis and electromagnetic
attacks, while the CPU-based crypto generally does not. In theory,
this sounds great. In practice, if this benefit requires the use of
an off-CPU offload that massively regresses performance and has a
low-quality, buggy driver, the price for this hardening (which is
not relevant to most fscrypt users, and tends to be incomplete) is
just too high. Inline crypto engines are much more promising here,
as are on-CPU solutions like RISC-V High Assurance Cryptography.
Fixes: b30ab0e034 ("ext4 crypto: add ext4 encryption facilities")
Cc: stable@vger.kernel.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250704070322.20692-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since sha256_blocks() is called only with nblocks >= 1, remove
unnecessary checks for nblocks == 0 from the x86 SHA-256 assembly code.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250704023958.73274-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
As I did for sha512_blocks(), reorganize x86's sha256_blocks() to be
just a static_call. To achieve that, for each assembly function add a C
function that handles the kernel-mode FPU section and fallback. While
this increases total code size slightly, the amount of code actually
executed on a given system does not increase, and it is slightly more
efficient since it eliminates the extra static_key. It also makes the
assembly functions be called with standard direct calls instead of
static calls, eliminating the need for ANNOTATE_NOENDBR.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250704023958.73274-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
* kCFI is restricted to clang-17 or newer, as earlier versions have
known bugs.
* sbi_hsm_hart_start is now staticly allocated, to avoid tripping up the
SBI HSM page mapping on sparse systems.
-----BEGIN PGP SIGNATURE-----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=KCl+
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- kCFI is restricted to clang-17 or newer, as earlier versions have
known bugs
- sbi_hsm_hart_start is now staticly allocated, to avoid tripping up
the SBI HSM page mapping on sparse systems.
* tag 'riscv-for-linus-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: cpu_ops_sbi: Use static array for boot_data
riscv: Require clang-17 or newer for kCFI
The BLOCK_HASH_UPDATE_BLOCKS macro is difficult to read. For now, let's
just write the update explicitly in the straightforward way, mirroring
sha512_update(). It's possible that we'll bring back a macro for this
later, but it needs to be properly justified and hopefully a bit more
readable.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-14-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Consolidate the CPU-based SHA-256 code into a single module, following
what I did with SHA-512:
- Each arch now provides a header file lib/crypto/$(SRCARCH)/sha256.h,
replacing lib/crypto/$(SRCARCH)/sha256.c. The header defines
sha256_blocks() and optionally sha256_mod_init_arch(). It is included
by lib/crypto/sha256.c, and thus the code gets built into the single
libsha256 module, with proper inlining and dead code elimination.
- sha256_blocks_generic() is moved from lib/crypto/sha256-generic.c into
lib/crypto/sha256.c. It's now a static function marked with
__maybe_unused, so the compiler automatically eliminates it in any
cases where it's not used.
- Whether arch-optimized SHA-256 is buildable is now controlled
centrally by lib/crypto/Kconfig instead of by
lib/crypto/$(SRCARCH)/Kconfig. The conditions for enabling it remain
the same as before, and it remains enabled by default.
- Any additional arch-specific translation units for the optimized
SHA-256 code (such as assembly files) are now compiled by
lib/crypto/Makefile instead of lib/crypto/$(SRCARCH)/Makefile.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Make the export and import functions for the sha224, sha256,
hmac(sha224), and hmac(sha256) shash algorithms use the same format as
the padlock-sha and nx-sha256 drivers, as required by Herbert.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Like I did for crypto/sha512.c, rework crypto/sha256.c to simply wrap
the normal library functions instead of accessing the low-level arch-
optimized and generic block functions directly. Also add support for
HMAC-SHA224 and HMAC-SHA256, again just wrapping the library functions.
Since the replacement crypto_shash algorithms are implemented using the
(potentially arch-optimized) library functions, give them driver names
ending with "-lib" rather than "-generic". Update crypto/testmgr.c and
a couple odd drivers to take this change in driver name into account.
Besides the above cases which are accounted for, there are no known
cases where the driver names were being depended on. There is
potential for confusion for people manually checking /proc/crypto (e.g.
https://lore.kernel.org/r/9e33c893-2466-4d4e-afb1-966334e451a2@linux.ibm.com/),
but really people just need to get used to the driver name not being
meaningful for the software algorithms. Historically, the optimized
code was disabled by default, so there was some purpose to checking
whether it was enabled or not. However, this is now fixed for all SHA-2
algorithms, and the library code just always does the right thing. E.g.
if the CPU supports SHA-256 instructions, they are used.
This change does also mean that the generic partial block handling code
in crypto/shash.c, which got added in 6.16, no longer gets used. But
that's fine; the library has to implement the partial block handling
anyway, and it's better to do it in the library since the block size and
other properties of the algorithm are all fixed at compile time there,
resulting in more streamlined code.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since HMAC support is commonly needed and is fairly simple, include it
as a first-class citizen of the SHA-256 library.
The API supports both incremental and one-shot computation, and either
preparing the key ahead of time or just using a raw key. The
implementation is much more streamlined than crypto/hmac.c.
I've kept it consistent with the HMAC-SHA384 and HMAC-SHA512 code as
much as possible.
Testing of these functions will be via sha224_kunit and sha256_kunit,
added by a later commit.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-9-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
The previous commit made the SHA-256 compression function state be
strongly typed, but it wasn't propagated all the way down to the
implementations of it. Do that now.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Currently the SHA-224 and SHA-256 library functions can be mixed
arbitrarily, even in ways that are incorrect, for example using
sha224_init() and sha256_final(). This is because they operate on the
same structure, sha256_state.
Introduce stronger typing, as I did for SHA-384 and SHA-512.
Also as I did for SHA-384 and SHA-512, use the names *_ctx instead of
*_state. The *_ctx names have the following small benefits:
- They're shorter.
- They avoid an ambiguity with the compression function state.
- They're consistent with the well-known OpenSSL API.
- Users usually name the variable 'sctx' anyway, which suggests that
*_ctx would be the more natural name for the actual struct.
Therefore: update the SHA-224 and SHA-256 APIs, implementation, and
calling code accordingly.
In the new structs, also strongly-type the compression function state.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a one-shot SHA-224 computation function sha224(), for consistency
with sha256(), sha384(), and sha512() which all already exist.
Similarly, add sha224_update(). While for now it's identical to
sha256_update(), omitting it makes the API harder to use since users
have to "know" which functions are the same between SHA-224 and SHA-256.
Also, this is a prerequisite for using different context types for each.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of having both sha256_blocks_arch() and sha256_blocks_simd(),
instead have just sha256_blocks_arch() which uses the most efficient
implementation that is available in the calling context.
This is simpler, as it reduces the API surface. It's also safer, since
sha256_blocks_arch() just works in all contexts, including contexts
where the FPU/SIMD/vector registers cannot be used. This doesn't mean
that SHA-256 computations *should* be done in such contexts, but rather
we should just do the right thing instead of corrupting a random task's
registers. Eliminating this footgun and simplifying the code is well
worth the very small performance cost of doing the check.
Note: in the case of arm and arm64, what used to be sha256_blocks_arch()
is renamed back to its original name of sha256_block_data_order().
sha256_blocks_arch() is now used for the higher-level dispatch function.
This renaming also required an update to lib/crypto/arm64/sha512.h,
since sha2-armv8.pl is shared by both SHA-256 and SHA-512.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
First, move the declarations of sha224_init/update/final to be just
above the corresponding SHA-256 code, matching the order that I used for
SHA-384 and SHA-512. In sha2.h, the end result is that SHA-224,
SHA-256, SHA-384, and SHA-512 are all in the logical order.
Second, move sha224_block_init() and sha256_block_init() to be just
below crypto_sha256_state. In later changes, these functions as well as
struct crypto_sha256_state will no longer be used by the library
functions. They'll remain just for some legacy offload drivers. This
gets them into a logical place in the file for that.
No code changes other than reordering.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
First, just use sha256() instead of a sequence of sha256_init(),
sha256_update(), and sha256_final(). The result is the same.
Second, use *phN instead of open-coding the conversion of bytes to hex.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Rename hmac_sha256() to ceph_hmac_sha256(), to avoid a naming conflict
with the upcoming hmac_sha256() library function.
This code will be able to use the HMAC-SHA256 library, but that's left
for a later commit.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
A few driver fixes (the GPIO one being potentially nasty, though it has
been there for a while without anyone reporting it), and one core fix
for the rarely used combination of coupled regulators and unbinding.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmhn7SYACgkQJNaLcl1U
h9Dxdgf/VP9GpJzVC+7m4PhUB/TidvtqH+vVTgR71npy+iC9BKh2BeI6KUJPmMGE
eqoeGNU3el11pysWl+qSTo7W5VR5TBtblgAMfy1Z33Y1ThVtpR1VvQSjkYDL9alR
BCvy1pwUjzXiJYV5O4hJZIiOhmHOxANKWehDM2wQC3WJW9AYr8ZinMZtTxCItJa2
gVbx+EeAC2ot0PdEK/atknn/P0rIXSbquSiZ9Vhag4sM5VMA34Iy3Zml5sKdUDZL
Rh65qCndId6FQ4b2oi12JPDRNs2RcRzK+UXlTqAFxxKQmwMIE9M+YlsxixUm7KVo
lrdxwP5+JpwE4KQb369CrlOG20dknA==
=+Ku3
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few driver fixes (the GPIO one being potentially nasty, though it
has been there for a while without anyone reporting it), and one core
fix for the rarely used combination of coupled regulators and
unbinding"
* tag 'regulator-fix-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: gpio: Fix the out-of-bounds access to drvdata::gpiods
regulator: mp886x: Fix ID table driver_data
regulator: sy8824x: Fix ID table driver_data
regulator: tps65219: Fix devm_kmalloc size allocation
regulator: core: fix NULL dereference on unbind due to stale coupling data
As well as a few driver specific fixes we've got a core change here
which raises the hard coded limit on the number of devices we can
support on one SPI bus since some FPGA based systems are running into
the existing limit. This is not a good solution but it's one suitable
for this point in the release cycle, we should dynamically size the
relevant data structures which I hope will happen in the next couple of
merge windows.
We also pull in a MTD fix for the Qualcomm SNAND driver, the two fixes
cover the same issue and merging them together minimises bisection
issues.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmhn61YACgkQJNaLcl1U
h9DcLgf9EAb448AdwWrM7P8KJ+mK8C0GTu/k4h6pO2u2SfQC6IaOfLZ8hwnYx0vv
ONzVLbbPIV2MFUPr/AZOjhIr16642qv0ddh3d11yX63BcapkiacL4RNvrMPHuCUT
ir3waPdOIrW/HgbLkxSeZOEhcROjGWv/A0a6tunseQwpcOkQqKyh4VtNIHhiXVqQ
KD/b6xXp0SG7IMQwEv+fWa/Bj5aVkkpEX/q/bKWDlXRd/YgsNhVLgSycsSt5eI4J
6K3kxM58x9NtHd1B/jYtHwREDNoIu4QmjzuTC4AoaKGzG41ct7sH91IOABduAE4m
k1KHWxyBh2bIVbWWGE7qrnzuDoHa5A==
=hOXU
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"As well as a few driver specific fixes we've got a core change here
which raises the hard coded limit on the number of devices we can
support on one SPI bus since some FPGA based systems are running into
the existing limit. This is not a good solution but it's one suitable
for this point in the release cycle, we should dynamically size the
relevant data structures which I hope will happen in the next couple
of merge windows.
We also pull in a MTD fix for the Qualcomm SNAND driver, the two fixes
cover the same issue and merging them together minimises bisection
issues"
* tag 'spi-fix-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: fix cleanup of rx_chan on failure paths
spi: spi-fsl-dspi: Clear completion counter before initiating transfer
spi: Raise limit on number of chip selects to 24
mtd: nand: qpic_common: prevent out of bounds access of BAM arrays
spi: spi-qpic-snand: reallocate BAM transactions
PMU drivers should set .suppress_bind_attrs so that userspace is denied
the opportunity to pull the driver out from underneath an in-use PMU
(with predictably unpleasant consequences). Somehow both the CMN and NI
drivers have managed to miss this; put that right.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/acd48c341b33b96804a3969ee00b355d40c546e2.1751465293.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Arnd reports that Clang's aggressive inlining of arm_cmn_discover() can
lead to stack frame size warnings, and while we could simply prevent
such inlining to hide the issue, it seems more productive to actually
heed the warning and do something about the overall stack footprint.
The xp_region array is already rather large, and CMN_MAX_XPS might only
grow larger in future, however it only serves as a convenience to save
repeating the first level's worth of register reads in the second pass
of discovery. There's no performance concern here, and it only takes a
small tweak to the flow to re-extract the offsets instead of stashing
them, so let's just do that and save several hundred bytes of stack.
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/e7dd41bf0f1b098e2e4b01ef91318a4b272abff8.1751046159.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Don't populate the read-only array mask on the stack at run time,
instead make it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250611133917.170888-1-colin.i.king@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Fixes and New HW Support
- amd/isp4: Improve swnode graph (new driver exception)
- asus-nb-wmi: Use duo keyboard quirk for Zenbook Duo UX8406CA
- dell-lis3lv02d: Add Latitude 5500 accelerometer address
- dell-wmi-sysman: Fix WMI data block retrieval and class dev unreg
- hp-bioscfg: Fix class device unregistration
- i2c: piix4: Re-enable on non-x86 + move FCH header under platform_data/
- intel/hid: Wildcat Lake support
- mellanox:
- mlxbf-pmc: Fix duplicate event ID
- mlxbf-tmfifo: Fix vring_desc.len assignment
- mlxreg-lc: Fix bit-not-set logic check
- nvsw-sn2201: Fix bus number in error message & spelling errors
- portwell-ec: Move watchdog device under correct platform hierarchy
- think-lmi: Error handling fixes (sysfs, kset, kobject, class dev unreg)
- thinkpad_acpi: Handle HKEY 0x1402 event (2025 Thinkpads)
- wmi: Fix WMI event enablement
The following is an automated shortlog grouped by driver:
asus-nb-wmi:
- add DMI quirk for ASUS Zenbook Duo UX8406CA
dell-lis3lv02d:
- Add Latitude 5500
dell-wmi-sysman:
- Fix class device unregistration
- Fix WMI data block retrieval in sysfs callbacks
hp-bioscfg:
- Fix class device unregistration
i2c:
- Re-enable piix4 driver on non-x86
intel/hid:
- Add Wildcat Lake support
mellanox:
- Fix spelling and comment clarity in Mellanox drivers
mlxbf-pmc:
- Fix duplicate event ID for CACHE_DATA1
mlxbf-tmfifo:
- fix vring_desc.len assignment
mlxreg-lc:
- Fix logic error in power state check
Move FCH header to a location accessible by all archs:
- Move FCH header to a location accessible by all archs
nvsw-sn2201:
- Fix bus number in adapter error message
portwell-ec:
- Move watchdog device under correct platform hierarchy
think-lmi:
- Create ksets consecutively
- Fix class device unregistration
- Fix kobject cleanup
- Fix sysfs group cleanup
thinkpad_acpi:
- handle HKEY 0x1402 event
Update swnode graph for amd isp4:
- Update swnode graph for amd isp4
wmi:
- Fix WMI event enablement
- Update documentation of WCxx/WExx ACPI methods
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaGfkwwAKCRBZrE9hU+XO
MVK1AQCK3C21auqcEbiZrx67hr5ir6VwTAZ9S6IR8R2FKqw8YwEAinUOcHSbmP6a
eXV0v5xVRPxZV7JBO5aN7FESqVHpBQ4=
=uxUH
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Mostly a few lines fixed here and there except amd/isp4 which improves
swnodes relationships but that is a new driver not in any stable
kernels yet. The think-lmi driver changes also look relatively large
but there are just many fixes to it.
The i2c/piix4 change is a effectively a revert of the commit
7e173eb82a ("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on
CONFIG_X86") but that required moving the header out from arch/x86
under include/linux/platform_data/
Summary:
- amd/isp4: Improve swnode graph (new driver exception)
- asus-nb-wmi: Use duo keyboard quirk for Zenbook Duo UX8406CA
- dell-lis3lv02d: Add Latitude 5500 accelerometer address
- dell-wmi-sysman: Fix WMI data block retrieval and class dev unreg
- hp-bioscfg: Fix class device unregistration
- i2c: piix4: Re-enable on non-x86 + move FCH header under platform_data/
- intel/hid: Wildcat Lake support
- mellanox:
- mlxbf-pmc: Fix duplicate event ID
- mlxbf-tmfifo: Fix vring_desc.len assignment
- mlxreg-lc: Fix bit-not-set logic check
- nvsw-sn2201: Fix bus number in error message & spelling errors
- portwell-ec: Move watchdog device under correct platform hierarchy
- think-lmi: Error handling fixes (sysfs, kset, kobject, class dev unreg)
- thinkpad_acpi: Handle HKEY 0x1402 event (2025 Thinkpads)
- wmi: Fix WMI event enablement"
* tag 'platform-drivers-x86-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (22 commits)
platform/x86: think-lmi: Fix sysfs group cleanup
platform/x86: think-lmi: Fix kobject cleanup
platform/x86: think-lmi: Create ksets consecutively
platform/mellanox: mlxreg-lc: Fix logic error in power state check
i2c: Re-enable piix4 driver on non-x86
Move FCH header to a location accessible by all archs
platform/x86/intel/hid: Add Wildcat Lake support
platform/x86: dell-wmi-sysman: Fix class device unregistration
platform/x86: think-lmi: Fix class device unregistration
platform/x86: hp-bioscfg: Fix class device unregistration
platform/x86: Update swnode graph for amd isp4
platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacks
platform/x86: wmi: Update documentation of WCxx/WExx ACPI methods
platform/x86: wmi: Fix WMI event enablement
platform/mellanox: nvsw-sn2201: Fix bus number in adapter error message
platform/mellanox: Fix spelling and comment clarity in Mellanox drivers
platform/mellanox: mlxbf-pmc: Fix duplicate event ID for CACHE_DATA1
platform/x86: thinkpad_acpi: handle HKEY 0x1402 event
platform/x86: asus-nb-wmi: add DMI quirk for ASUS Zenbook Duo UX8406CA
platform/x86: dell-lis3lv02d: Add Latitude 5500
...
The current MODULE_DESCRIPTION only mentions CMN-600, but this driver
now supports several Arm mesh interconnects including CMN-650, CMN-700,
CI-700, and CMN-S3.
Update the MODULE_DESCRIPTION to reflect the expanded scope.
Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn>
Link: https://lore.kernel.org/r/20250522032122.949373-1-daizhiyuan@phytium.com.cn
Signed-off-by: Will Deacon <will@kernel.org>
Here are some USB driver fixes for 6.16-rc5. I originally wanted this
to get into -rc4, but there were some regressions that had to be handled
first. Now all looks good. Included in here are the following fixes:
- cdns3 driver fixes
- xhci driver fixes
- typec driver fixes
- USB hub fixes (this is what took the longest to get right)
- new USB driver quirks added
- chipidea driver fixes
All of these have been in linux-next for a while and now we have no more
reported problems with them.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaGfkTw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymMBACg0lqiO2KPRY0J/46eJ/a0MTPDdOUAnRAtilDA
mv/7Mvm/vnkLMKgK06Vu
=QYvp
-----END PGP SIGNATURE-----
Merge tag 'usb-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB driver fixes for 6.16-rc5. I originally wanted this
to get into -rc4, but there were some regressions that had to be
handled first. Now all looks good. Included in here are the following
fixes:
- cdns3 driver fixes
- xhci driver fixes
- typec driver fixes
- USB hub fixes (this is what took the longest to get right)
- new USB driver quirks added
- chipidea driver fixes
All of these have been in linux-next for a while and now we have no
more reported problems with them"
* tag 'usb-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
usb: hub: Fix flushing of delayed work used for post resume purposes
xhci: dbc: Flush queued requests before stopping dbc
xhci: dbctty: disable ECHO flag by default
xhci: Disable stream for xHC controller with XHCI_BROKEN_STREAMS
usb: xhci: quirk for data loss in ISOC transfers
usb: dwc3: gadget: Fix TRB reclaim logic for short transfers and ZLPs
usb: hub: Fix flushing and scheduling of delayed work that tunes runtime pm
usb: typec: displayport: Fix potential deadlock
usb: typec: altmodes/displayport: do not index invalid pin_assignments
usb: cdnsp: Fix issue with CV Bad Descriptor test
usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach
Revert "usb: xhci: Implement xhci_handshake_check_state() helper"
usb: xhci: Skip xhci_reset in xhci_resume if xhci is being removed
usb: gadget: u_serial: Fix race condition in TTY wakeup
Revert "usb: gadget: u_serial: Add null pointer check in gs_start_io"
usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume
usb: acpi: fix device link removal
usb: hub: fix detection of high tier USB3 devices behind suspended hubs
Logitech C-270 even more broken
usb: dwc3: Abort suspend on soft disconnect failure
...
- support for Acer NGR 200 Controller added to xpad driver
- xpad driver will no longer log errors about URBs at sudden disconnect
- a fix for potential NULL dereference in cs40l50-vibra driver
- several drivers have been switched to using scnprintf() to suppress
warnings about potential output truncation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaGdm4wAKCRBAj56VGEWX
nJJxAPwMafYOIr+aW1+taLorp3FRyoFuh9Q4IZk9n3J2Dx/HGwD8CUpXDytgE+n7
BRMjXB7PPF9b35FjmKT8kTIHZxiTHAc=
=w9vL
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for Acer NGR 200 Controller added to xpad driver
- xpad driver will no longer log errors about URBs at sudden disconnect
- a fix for potential NULL dereference in cs40l50-vibra driver
- several drivers have been switched to using scnprintf() to suppress
warnings about potential output truncation
* tag 'input-for-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cs40l50-vibra - fix potential NULL dereference in cs40l50_upload_owt()
Input: alps - use scnprintf() to suppress truncation warning
Input: iqs7222 - explicitly define number of external channels
Input: xpad - support Acer NGR 200 Controller
Input: xpad - return errors from xpad_try_sending_next_out_packet() up
Input: xpad - adjust error handling for disconnect
Input: apple_z2 - drop default ARCH_APPLE in Kconfig
Input: Fully open-code compatible for grepping
dt-bindings: HID: i2c-hid: elan: Introduce Elan eKTH8D18
Input: psmouse - switch to use scnprintf() to suppress truncation warning
Input: lifebook - switch to use scnprintf() to suppress truncation warning
Input: alps - switch to use scnprintf() to suppress truncation warning
Input: atkbd - switch to use scnprintf() to suppress truncation warning
Input: fsia6b - suppress buffer truncation warning for phys
Input: iqs626a - replace snprintf() with scnprintf()
dma-buf:
- fix timeout handling
gem:
- fix framebuffer object references
sched:
- fix spsc queue job count race
bridge:
- fix aux hpd bridge of node
- panel: move missing flag handling
- samsung-dsim: fix %pK usage to %p
panel:
- fix problem with simple panel lookup
ttm:
- fix error path handling
amdgpu:
- SDMA 5.x reset fix
- Add missing firmware declaration
- Fix leak in amdgpu_ctx_mgr_entity_fini()
- Freesync fix
- OLED backlight fix
amdkfd:
- mtype fix for ext coherent system memory
- MMU notifier fix
- gfx7/8 fix
xe:
- Fix chunking the PTE updates and overflowing the maximum number of
dwords with with MI_STORE_DATA_IMM
- Move WA BB to the LRC BO to mitigate hangs on context switch
- Fix frequency/flush WAs for BMG
- Fix kconfig prompt title and description
- Do not require kunit
- Extend 14018094691 WA to BMG
- Fix wedging the device on signal
i915:
- Make mei interrupt top half irq disabled to fix RT builds
- Fix timeline left held on VMA alloc error
- Fix NULL pointer deref in vlv_dphy_param_init()
- Fix selftest mock_request() to avoid NULL deref
exynos:
- switch to using %p instead of %pK
- fix vblank NULL ptr race
- fix lockup on samsung peach-pit/pi chromebooks
vesadrm:
- NULL ptr fix
vmwgfx:
- fix encrypted memory allocation bug
v3d:
- fix irq enabled during reset
-----BEGIN PGP SIGNATURE-----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=mTVZ
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-07-04' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, bit of a bumper crop, the usual amdgpu/xe/i915
suspects, then there is a large scattering of fixes across core and
drivers. I think the simple panel lookup fix is probably the largest,
the sched race fix is also fun, but I don't see anything standing out
too badly.
dma-buf:
- fix timeout handling
gem:
- fix framebuffer object references
sched:
- fix spsc queue job count race
bridge:
- fix aux hpd bridge of node
- panel: move missing flag handling
- samsung-dsim: fix %pK usage to %p
panel:
- fix problem with simple panel lookup
ttm:
- fix error path handling
amdgpu:
- SDMA 5.x reset fix
- Add missing firmware declaration
- Fix leak in amdgpu_ctx_mgr_entity_fini()
- Freesync fix
- OLED backlight fix
amdkfd:
- mtype fix for ext coherent system memory
- MMU notifier fix
- gfx7/8 fix
xe:
- Fix chunking the PTE updates and overflowing the maximum number of
dwords with with MI_STORE_DATA_IMM
- Move WA BB to the LRC BO to mitigate hangs on context switch
- Fix frequency/flush WAs for BMG
- Fix kconfig prompt title and description
- Do not require kunit
- Extend 14018094691 WA to BMG
- Fix wedging the device on signal
i915:
- Make mei interrupt top half irq disabled to fix RT builds
- Fix timeline left held on VMA alloc error
- Fix NULL pointer deref in vlv_dphy_param_init()
- Fix selftest mock_request() to avoid NULL deref
exynos:
- switch to using %p instead of %pK
- fix vblank NULL ptr race
- fix lockup on samsung peach-pit/pi chromebooks
vesadrm:
- NULL ptr fix
vmwgfx:
- fix encrypted memory allocation bug
v3d:
- fix irq enabled during reset"
* tag 'drm-fixes-2025-07-04' of https://gitlab.freedesktop.org/drm/kernel: (41 commits)
drm/xe: Do not wedge device on killed exec queues
drm/xe: Extend WA 14018094691 to BMG
drm/v3d: Disable interrupts before resetting the GPU
drm/gem: Acquire references on GEM handles for framebuffers
drm/sched: Increment job count before swapping tail spsc queue
drm/xe: Allow dropping kunit dependency as built-in
drm/xe: Fix kconfig prompt
drm/xe/bmg: Update Wa_22019338487
drm/xe/bmg: Update Wa_14022085890
drm/xe: Split xe_device_td_flush()
drm/xe/xe_guc_pc: Lock once to update stashed frequencies
drm/xe/guc_pc: Add _locked variant for min/max freq
drm/xe: Make WA BB part of LRC BO
drm/xe: Fix out-of-bounds field write in MI_STORE_DATA_IMM
drm/i915/gsc: mei interrupt top half should be in irq disabled context
drm/i915/gt: Fix timeline left held on VMA alloc error
drm/vmwgfx: Fix guests running with TDX/SEV
drm/amd/display: Don't allow OLED to go down to fully off
drm/amd/display: Added case for when RR equals panel's max RR using freesync
drm/amdkfd: add hqd_sdma_get_doorbell callbacks for gfx7/8
...
-----BEGIN PGP SIGNATURE-----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=1VG9
-----END PGP SIGNATURE-----
Merge tag 'block-6.16-20250704' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe fixes via Christoph:
- fix incorrect cdw15 value in passthru error logging (Alok Tiwari)
- fix memory leak of bio integrity in nvmet (Dmitry Bogdanov)
- refresh visible attrs after being checked (Eugen Hristev)
- fix suspicious RCU usage warning in the multipath code (Geliang Tang)
- correctly account for namespace head reference counter (Nilay Shroff)
- Fix for a regression introduced in ublk in this cycle, where it would
attempt to queue a canceled request.
- brd RCU sleeping fix, also introduced in this cycle. Bare bones fix,
should be improved upon for the next release.
* tag 'block-6.16-20250704' of git://git.kernel.dk/linux:
brd: fix sleeping function called from invalid context in brd_insert_page()
ublk: don't queue request if the associated uring_cmd is canceled
nvme-multipath: fix suspicious RCU usage warning
nvme-pci: refresh visible attrs after being checked
nvmet: fix memory leak of bio integrity
nvme: correctly account for namespace head reference counter
nvme: Fix incorrect cdw15 value in passthru error logging
designware: initialise msg_write_idx during transfer
microchip: check return value from core xfer call
realtek: add 'reg' property constraint to the device tree
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCaGd7ehYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uEDIA/1YXjT/uySv/asAt6V8Koihi4SDp
OALBLwjbZPwd9e3HAQDvShB1yYB2ZsgqNwk09xEavR0Bw4UKfmWgH5IedevfCg==
=jSeW
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.16-rc5
designware: initialise msg_write_idx during transfer
microchip: check return value from core xfer call
realtek: add 'reg' property constraint to the device tree
-----BEGIN PGP SIGNATURE-----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=b+3P
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2025-07-03' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"The 'opts.casefold_disabled' patch is non critical, but would be a
6.15 backport; it's to address the casefolding + overlayfs
incompatibility that was discovvered late.
It's late because I was hoping that this would be addressed on the
overlayfs side (and will be in 6.17), but user reports keep coming in
on this one (lots of people are using docker these days)"
* tag 'bcachefs-2025-07-03' of git://evilpiepirate.org/bcachefs:
bcachefs: opts.casefold_disabled
bcachefs: Work around deadlock to btree node rewrites in journal replay
bcachefs: Fix incorrect transaction restart handling
bcachefs: fix btree_trans_peek_prev_journal()
bcachefs: mark invalid_btree_id autofix
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaGeHBAAKCRCRxhvAZXjc
omJNAQCnHIDuiscCUFeevb5sMNqws6td2kexX8reLxbdzzTrFgEAwAKxy5BVhNlg
NusCZ2taYmenAK+HjI3JEw6c/3IKqwE=
=NxGx
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.16-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a regression caused by the anonymous inode rework. Making them
regular files causes various places in the kernel to tip over
starting with io_uring.
Revert to the former status quo and port our assertion to be based on
checking the inode so we don't lose the valuable VFS_*_ON_*()
assertions that have already helped discover weird behavior our
outright bugs.
- Fix the the upper bound calculation in fuse_fill_write_pages()
- Fix priority inversion issues in the eventpoll code
- Make secretmen use anon_inode_make_secure_inode() to avoid bypassing
the LSM layer
- Fix a netfs hang due to missing case in final DIO read result
collection
- Fix a double put of the netfs_io_request struct
- Provide some helpers to abstract out NETFS_RREQ_IN_PROGRESS flag
wrangling
- Fix infinite looping in netfs_wait_for_pause/request()
- Fix a netfs ref leak on an extra subrequest inserted into a request's
list of subreqs
- Fix various cifs RPC callbacks to set NETFS_SREQ_NEED_RETRY if a
subrequest fails retriably
- Fix a cifs warning in the workqueue code when reconnecting a channel
- Fix the updating of i_size in netfs to avoid a race between testing
if we should have extended the file with a DIO write and changing
i_size
- Merge the places in netfs that update i_size on write
- Fix coredump socket selftests
* tag 'vfs-6.16-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
anon_inode: rework assertions
netfs: Update tracepoints in a number of ways
netfs: Renumber the NETFS_RREQ_* flags to make traces easier to read
netfs: Merge i_size update functions
netfs: Fix i_size updating
smb: client: set missing retry flag in cifs_writev_callback()
smb: client: set missing retry flag in cifs_readv_callback()
smb: client: set missing retry flag in smb2_writev_callback()
netfs: Fix ref leak on inserted extra subreq in write retry
netfs: Fix looping in wait functions
netfs: Provide helpers to perform NETFS_RREQ_IN_PROGRESS flag wangling
netfs: Fix double put of request
netfs: Fix hang due to missing case in final DIO read result collection
eventpoll: Fix priority inversion problem
fuse: fix fuse_fill_write_pages() upper bound calculation
fs: export anon_inode_make_secure_inode() and fix secretmem LSM bypass
selftests/coredump: Fix "socket_detect_userspace_client" test failure
Merge series from Sakari Ailus <sakari.ailus@linux.intel.com>:
Late last year I posted a set to switch to __pm_runtime_mark_last_busy()
and gradually get rid of explicit pm_runtime_mark_last_busy() calls in
drivers, embedding them in the appropriate pm_runtime_*autosuspend*()
calls. The overall feedback I got at the time was that this is an
unnecessary intermediate step, and removing the
pm_runtime_mark_last_busy() calls can be done after adding them to the
relevant Runtime PM autosuspend related functions. The latter part has
been done and is present in Rafael's tree at the moment, also see
<URL:https://lore.kernel.org/linux-pm/CAJZ5v0g7-8UWp6ATOy+=oGdxDaCnfKHBG_+kbiTr+
+VeuXZsUFQ@mail.gmail.com/>:
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git \
pm-runtime-6.17-rc1
An update for the MAINTAINERS file, plus a number of small driver
specific fixes and device quirks.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmhn7fgACgkQJNaLcl1U
h9ASmAf+J5Wo5QIvuO7FwvNZAId2f21FQSH2PuXC/Pq7RQz2t74u4WdTx19qCU7D
PbduQwzizElKiYHrtvNBGeOHk0LZer1yyI74G5ziRE8gPwQUFK2gKLqGE8dbGhZp
0YjXMK4Yps0br+zJt5UC6zAzPIddYcv43VHb/YJr0dFV3G3vjHQbvyrHHVCgla/u
r1wCdHLqXsHF85OSoc/BIVSwgaDEztAs1bq4jXBw8upVbc0nmi8glJ7gYaRB4Ggv
U5llRHFOgCRWor4yNBXCF8Os9m90khk1/DQqdVBMsXX4R2npbnmPhIu73NarQ49/
F6mTSK4f7jfGBGxpZR16kPHkiwi2fQ==
=ConA
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.16-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
An update for the MAINTAINERS file, plus a number of small driver
specific fixes and device quirks.
Register X0 contains PIE_E1_ASM and should not be written into REG_TCR2_EL1
which could have an adverse impact otherwise. This has remained undetected
till now probably because current value for PIE_E1_ASM (0xcc880e0ac0800000)
clears TCR2_EL1 which again gets set subsequently with 'tcr2' after testing
for FEAT_TCR2.
Drop this unwarranted 'msr' which is a stray change from an earlier commit.
This line got re-introduced when rebasing on top of the commit 926b66e2eb
("arm64: setup: name 'tcr2' register").
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Fixes: 7052e808c4 ("arm64/sysreg: Get rid of the TCR2_EL1x SysregFields")
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250704063812.298914-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
We do not currently issue an ISB after updating POR_EL0 when
context-switching it, for instance. The rationale is that if the old
value of POR_EL0 is more restrictive and causes a fault during
uaccess, the access will be retried [1]. In other words, we are
trading an ISB on every context-switching for the (unlikely)
possibility of a spurious fault. We may also miss faults if the new
value of POR_EL0 is more restrictive, but that's considered
acceptable.
However, as things stand, a spurious Overlay fault results in
uaccess failing right away since it causes fault_from_pkey() to
return true. If an Overlay fault is reported, we therefore need to
double check POR_EL0 against vma_pkey(vma) - this is what
arch_vma_access_permitted() already does.
As it turns out, we already perform that explicit check if no
Overlay fault is reported, and we need to keep that check (see
comment added in fault_from_pkey()). Net result: the Overlay ISS2
bit isn't of much help to decide whether a pkey fault occurred.
Remove the check for the Overlay bit from fault_from_pkey() and
add a comment to try and explain the situation. While at it, also
add a comment to permission_overlay_switch() in case anyone gets
surprised by the lack of ISB.
[1] https://lore.kernel.org/linux-arm-kernel/ZtYNGBrcE-j35fpw@arm.com/
Fixes: 160a8e13de ("arm64: context switch POR_EL0 register")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20250619160042.2499290-2-kevin.brodsky@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
We have a number of hwcaps for various SME subfeatures enumerated via
ID_AA64SMFR0_EL1. Currently we advertise these without cross checking
against the main SME feature, advertised in ID_AA64PFR1_EL1.SME which
means that if the two are out of sync userspace can see a confusing
situation where SME subfeatures are advertised without the base SME
hwcap. This can be readily triggered by using the arm64.nosme override
which only masks out ID_AA64PFR1_EL1.SME, and there have also been
reports of VMMs which do the same thing.
Fix this as we did previously for SVE in 064737920b ("arm64: Filter
out SVE hwcaps when FEAT_SVE isn't implemented") by filtering out the
SME subfeature hwcaps when FEAT_SME is not present.
Fixes: 5e64b862c4 ("arm64/sme: Basic enumeration support")
Reported-by: Yury Khrustalev <yury.khrustalev@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250620-arm64-sme-filter-hwcaps-v1-1-02b9d3c2d8ef@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
For really large values of CONFIG_NR_CPUS, a CPU mask value should
not be put on the stack:
arch/arm64/kernel/smp.c:1188:1: error: the frame size of 8544 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
This could be achieved using alloc_cpumask_var(), which makes it
depend on CONFIG_CPUMASK_OFFSTACK, but as this function is already
serialized and can only run on one CPU, making the variable 'static'
is easier.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250620111045.3364827-1-arnd@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The GPU hard reset sequence calls pm_runtime_force_suspend() and
pm_runtime_force_resume(), which according to their documentation should
only be used during system-wide PM transitions to sleep states.
The main issue though is that depending on some internal runtime PM
state as seen by pm_runtime_force_suspend() (whether the usage count is
<= 1), pm_runtime_force_resume() might not resume the device unless
needed. If that happens, the runtime PM resume callback
pvr_power_device_resume() is not called, the GPU clocks are not
re-enabled, and the kernel crashes on the next attempt to access GPU
registers as part of the power-on sequence.
Replace calls to pm_runtime_force_suspend() and
pm_runtime_force_resume() with direct calls to the driver's runtime PM
callbacks, pvr_power_device_suspend() and pvr_power_device_resume(),
to ensure clocks are re-enabled and avoid the kernel crash.
Fixes: cc1aeedb98 ("drm/imagination: Implement firmware infrastructure and META FW support")
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://lore.kernel.org/r/20250624-fix-kernel-crash-gpu-hard-reset-v1-1-6d24810d72a6@imgtec.com
Cc: stable@vger.kernel.org
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
For performance reasons (minimizing the number of cache lines accessed
in the hot path), we store the "canceling" state redundantly - there is
one flag in the device, which can be considered the source of truth, and
per-queue copies of that flag. This redundancy can cause confusion, and
opens the door to bugs where the state is set inconsistently. Try to
guard against these bugs by introducing a ublk_set_canceling helper
which is the sole mutator of both the per-device and per-queue canceling
state. This helper always sets the state consistently. Use the helper in
all places where we need to modify the canceling state.
No functional changes are expected.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250703-ublk_too_many_quiesce-v2-2-3527b5339eeb@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Recently, we've observed a few cases where a ublk server is able to
complete restart more quickly than the driver can process the exit of
the previous ublk server. The new ublk server comes up, attempts
recovery of the preexisting ublk devices, and observes them still in
state UBLK_S_DEV_LIVE. While this is possible due to the asynchronous
nature of io_uring cleanup and should therefore be handled properly in
the ublk server, it is still preferable to make ublk server exit
handling faster if possible, as we should strive for it to not be a
limiting factor in how fast a ublk server can restart and provide
service again.
Analysis of the issue showed that the vast majority of the time spent in
handling the ublk server exit was in calls to blk_mq_quiesce_queue,
which is essentially just a (relatively expensive) call to
synchronize_rcu. The ublk server exit path currently issues an
unnecessarily large number of calls to blk_mq_quiesce_queue, for two
reasons:
1. It tries to call blk_mq_quiesce_queue once per ublk_queue. However,
blk_mq_quiesce_queue targets the request_queue of the underlying ublk
device, of which there is only one. So the number of calls is larger
than necessary by a factor of nr_hw_queues.
2. In practice, it calls blk_mq_quiesce_queue _more_ than once per
ublk_queue. This is because of a data race where we read
ubq->canceling without any locking when deciding if we should call
ublk_start_cancel. It is thus possible for two calls to
ublk_uring_cmd_cancel_fn against the same ublk_queue to both call
ublk_start_cancel against the same ublk_queue.
Fix this by making the "canceling" flag a per-device state. This
actually matches the existing code better, as there are several places
where the flag is set or cleared for all queues simultaneously, and
there is the general expectation that cancellation corresponds with ublk
server exit. This per-device canceling flag is then checked under a
(new) lock (addressing the data race (2) above), and the queue is only
quiesced if it is cleared (addressing (1) above). The result is just one
call to blk_mq_quiesce_queue per ublk device.
To minimize the number of cache lines that are accessed in the hot path,
the per-queue canceling flag is kept. The values of the per-device
canceling flag and all per-queue canceling flags should always match.
In our setup, where one ublk server handles I/O for 128 ublk devices,
each having 24 hardware queues of depth 4096, here are the results
before and after this patch, where teardown time is measured from the
first call to io_ring_ctx_wait_and_kill to the return from the last
ublk_ch_release:
before after
number of calls to blk_mq_quiesce_queue: 6469 256
teardown time: 11.14s 2.44s
There are still some potential optimizations here, but this takes care
of a big chunk of the ublk server exit handling delay.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250703-ublk_too_many_quiesce-v2-1-3527b5339eeb@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
During EL2 setup if GCS is advertised in the ID registers we will reset the
GCS control registers GCSCR_EL1 and GCSCRE0_EL1 to known values in order to
ensure it is disabled. This is done without taking into account overrides
supplied on the command line, meaning that if the user has configured
arm64.nogcs we will still access these GCS specific registers. If this was
done because EL3 does not enable GCS this results in traps to EL3 and a
failed boot which is not what users would expect from having set that
parameter.
Move the writes to these registers to finalise_el2_state where we can pay
attention to the command line overrides. For simplicity we leave the
updates to the traps in HCRX_EL2 and the FGT registers in place since these
should only be relevant for KVM guests and KVM will manage them itself for
guests. This follows the existing practice for other similar traps for
overridable features such as those for TPIDR2_EL0 and SMPRI_EL1.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250619-arm64-fix-nogcs-v1-1-febf2973672e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
