In target mode, extra interrupts can be received between the end of a
transfer and halting the module if the host continues sending more data.
If the interrupt from this occurs after the reinit_completion() then the
completion counter is left at a non-zero value. The next unrelated
transfer initiated by userspace will then complete immediately without
waiting for the interrupt or writing to the RX buffer.
Fix it by resetting the counter before the transfer so that lingering
values are cleared. This is done after clearing the FIFOs and the
status register but before the transfer is initiated, so no interrupts
should be received at this point resulting in other race conditions.
Fixes: 4f5ee75ea1 ("spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250627-james-nxp-spi-dma-v4-1-178dba20c120@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The common QPIC code does not do any boundary checking when it handles
the command elements and scatter gater list arrays of a BAM transaction,
thus it allows to access out of bounds elements in those.
Although it is the responsibility of the given driver to allocate enough
space for all possible BAM transaction variations, however there can be
mistakes in the driver code which can lead to hidden memory corruption
issues which are hard to debug.
This kind of problem has been observed during testing the 'spi-qpic-snand'
driver. Although the driver has been fixed with a preceding patch, but it
still makes sense to reduce the chance of having such errors again later.
In order to prevent such errors, change the qcom_alloc_bam_transaction()
function to store the number of elements of the arrays in the
'bam_transaction' strucutre during allocation. Also, add sanity checks to
the qcom_prep_bam_dma_desc_{cmd,data}() functions to avoid using out of
bounds indices for the arrays.
Tested-by: Lakshmi Sowjanya D <quic_laksd@quicinc.com> # on SDX75
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250618-qpic-snand-avoid-mem-corruption-v3-2-319c71296cda@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using the mtd_nandbiterrs module for testing the driver occasionally
results in weird things like below.
1. swiotlb mapping fails with the following message:
[ 85.926216] qcom_snand 79b0000.spi: swiotlb buffer is full (sz: 4294967294 bytes), total 512 (slots), used 0 (slots)
[ 85.932937] qcom_snand 79b0000.spi: failure in mapping desc
[ 87.999314] qcom_snand 79b0000.spi: failure to write raw page
[ 87.999352] mtd_nandbiterrs: error: write_oob failed (-110)
Rebooting the board after this causes a panic due to a NULL pointer
dereference.
2. If the swiotlb mapping does not fail, rebooting the board may result
in a different panic due to a bad spinlock magic:
[ 256.104459] BUG: spinlock bad magic on CPU#3, procd/2241
[ 256.104488] Unable to handle kernel paging request at virtual address ffffffff0000049b
...
Investigating the issue revealed that these symptoms are results of
memory corruption which is caused by out of bounds access within the
driver.
The driver uses a dynamically allocated structure for BAM transactions,
which structure must have enough space for all possible variations of
different flash operations initiated by the driver. The required space
heavily depends on the actual number of 'codewords' which is calculated
from the pagesize of the actual NAND chip.
Although the qcom_nandc_alloc() function allocates memory for the BAM
transactions during probe, but since the actual number of 'codewords'
is not yet know the allocation is done for one 'codeword' only.
Because of this, whenever the driver does a flash operation, and the
number of the required transactions exceeds the size of the allocated
arrays the driver accesses memory out of the allocated range.
To avoid this, change the code to free the initially allocated BAM
transactions memory, and allocate a new one once the actual number of
'codewords' required for a given NAND chip is known.
Fixes: 7304d19090 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Reviewed-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250618-qpic-snand-avoid-mem-corruption-v3-1-319c71296cda@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In probe(), two arrays of structs are allocated with the devm_kmalloc()
function, but the memory size of the allocations were given as the arrays'
length (pmic->common_irq_size for the first call and pmic->dev_irq_size for
the second devm_kmalloc call). The memory size should have been the total
memory needed.
This led to a heap overflow when the struct array was used. The issue was
first discovered with the PocketBeagle2 and BeaglePlay. The common and
device-specific structs are now allocated one at a time within the loop.
Fixes: 38c9f98db2 ("regulator: tps65219: Add support for TPS65215 Regulator IRQs")
Reported-by: Dhruva Gole <d-gole@ti.com>
Closes: https://lore.kernel.org/all/20250619153526.297398-1-d-gole@ti.com/
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://patch.msgid.link/20250620154541.2713036-1-s-ramamoorthy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Failing to reset coupling_desc.n_coupled after freeing coupled_rdevs can
lead to NULL pointer dereference when regulators are accessed post-unbind.
This can happen during runtime PM or other regulator operations that rely
on coupling metadata.
For example, on ridesx4, unbinding the 'reg-dummy' platform device triggers
a panic in regulator_lock_recursive() due to stale coupling state.
Ensure n_coupled is set to 0 to prevent access to invalid pointers.
Signed-off-by: Alessandro Carminati <acarmina@redhat.com>
Link: https://patch.msgid.link/20250626083809.314842-1-acarmina@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When __regmap_init() is called from __regmap_init_i2c() and
__regmap_init_spi() (and their devm versions), the bus argument
obtained from regmap_get_i2c_bus() and regmap_get_spi_bus(), may be
allocated using kmemdup() to support quirks. In those cases, the
bus->free_on_exit field is set to true.
However, inside __regmap_init(), buf is not freed on any error path.
This could lead to a memory leak of regmap_bus when __regmap_init()
fails. Fix that by freeing bus on error path when free_on_exit is set.
Fixes: ea030ca688 ("regmap-i2c: Set regmap max raw r/w from quirks")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Link: https://patch.msgid.link/20250626172823.18725-1-abdun.nihaal@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Matches should go from more specific to less specific, correct the
ordering of two cs42l43 entries.
Fixes: c052406765 ("ASoC: Intel: soc-acpi: arl: Add match entries for new cs42l43 laptops")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250626141841.77780-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some of the codec drivers like wcd939x are missing in the MAINTAINERS
which is resulting in incorrect list from get_maintainers script.
Fix this by using wildcard matching on both wcd93* and wsa88* codec and
bindings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250627160329.442795-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On an imx8mm platform with an external clock provider, when running the
receiver (arecord) and triggering an xrun with xrun_injection, we see a
channel swap/offset. This happens sometimes when running only the
receiver, but occurs reliably if a transmitter (aplay) is also
concurrently running.
It seems that the SAI loses track of frame sync during the trigger stop
-> trigger start cycle that occurs during an xrun. Doing just a FIFO
reset in this case does not suffice, and only a software reset seems to
get it back on track.
This looks like the same h/w bug that is already handled for the
producer case, so we now do the reset unconditionally on config disable.
Signed-off-by: Arun Raghavan <arun@asymptotic.io>
Reported-by: Pieterjan Camerlynck <p.camerlynck@televic.com>
Fixes: 3e3f8bd569 ("ASoC: fsl_sai: fix no frame clk in master mode")
Cc: stable@vger.kernel.org
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20250626130858.163825-1-arun@arunraghavan.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The helpers that are provided by SND_SOC_ACPI_INTEL_MATCH
(soc-acpi-intel-ssp-common) are used in SND_SOC_INTEL_SOF_BOARD_HELPERS
(sof_board_helpers).
SND_SOC_ACPI_INTEL_MATCH is selected by machine drivers. When
skl_hda_dsp_generic uses the board helpers, it select
SND_SOC_INTEL_SOF_BOARD_HELPERS only but not SND_SOC_ACPI_INTEL_MATCH
which initroduce the undefined symbol errors. However, it makes more
sense that SND_SOC_INTEL_SOF_BOARD_HELPERS select
SND_SOC_ACPI_INTEL_MATCH itself.
Fixes: b28b23dea3 ("ASoC: Intel: skl_hda_dsp_generic: use common module for DAI links")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506141543.dN0JJyZC-lkp@intel.com/
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20250626064420.450334-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When USRC=0, there is underrun issue for the non-ideal ratio mode;
according to the reference mannual, the internal measured ratio can be
used with USRC=1 and IDRC=0.
Fixes: d0250cf4f2 ("ASoC: fsl_asrc: Add an option to select internal ratio mode")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250625020504.2728161-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In Rust Binder I need to be able to determine whether a red/black tree
is empty. Thus, add a method for that operation to replace
rbtree.iter().next().is_none()
This is terrible, so add a method for this purpose. We do not add a
RBTree::len method because computing the number of elements requires
iterating the entire tree, but checking whether it is empty can be done
cheaply.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250616-rbtree-is-empty-v1-1-61f7cfb012e3@google.com
[ Adjusted title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The match pattern for a optional trailing comma in the list of generics
is erroneously repeated in the code block resulting in following error:
| error: attempted to repeat an expression containing no syntax variables matched as repeating at this depth
| --> rust/kernel/init.rs:301:73
| |
| 301 | ::pin_init::try_pin_init!($(&$this in)? $t $(::<$($generics),* $(,)?>)? {
| | ^^^
Remove "$(,)?" from all code blocks in the try_init! and try_pin_init!
definitions.
Cc: stable@vger.kernel.org
Fixes: 578eb8b6db ("rust: pin-init: move the default error behavior of `try_[pin_]init`")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250628-rust_init_trailing_comma-v1-1-2d162ae1a757@jannau.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Here is a single staging driver fix for 6.16-rc4. It resolves a build
error in the rtl8723bs driver for some versions of clang on arm64 when
checking the frame size with -Wframe-larger-than.
It has been in linux-next for a while now with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaGEwLA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl1CACglnFMp3D+vkjNwDiDvYY4KhJCejkAoMwLpSdr
lDh2mnQSJ/5aY7pHe9CZ
=8Brn
-----END PGP SIGNATURE-----
Merge tag 'staging-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 6.16-rc4. It resolves a build
error in the rtl8723bs driver for some versions of clang on arm64 when
checking the frame size with -Wframe-larger-than.
It has been in linux-next for a while now with no reported issues"
* tag 'staging-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: Avoid memset() in aes_cipher() and aes_decipher()
Here are 5 small serial and tty and vt fixes for 6.16-rc4. Included in
here are:
- kerneldoc fixes for vt recent changes
- imx serial driver fix
- of_node sysfs fix for a regression
- vt missing notification fix
- 8250 dt bindings fix
All of these have been in linux-next for a while with no reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaGExmw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yntSQCZAc5lq73ZU4Fchhl6pzYPkqDjUboAoIQwQN6a
WsV/qlgO+vAL4edKai3t
=7xRK
-----END PGP SIGNATURE-----
Merge tag 'tty-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are five small serial and tty and vt fixes for 6.16-rc4. Included
in here are:
- kerneldoc fixes for recent vt changes
- imx serial driver fix
- of_node sysfs fix for a regression
- vt missing notification fix
- 8250 dt bindings fix
All of these have been in linux-next for a while with no reported issues"
* tag 'tty-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
dt-bindings: serial: 8250: Make clocks and clock-frequency exclusive
serial: imx: Restore original RXTL for console to fix data loss
serial: core: restore of_node information in sysfs
vt: fix kernel-doc warnings in ucs_get_fallback()
vt: add missing notification when switching back to text mode
In the current implementation of ad3530r_set_dac_powerdown() function,
the macro AD3530R_OP_MODE_CHAN_MSK(chan->channel) is used to generate
the bitmask for the operating mode of a specific channel. However, this
macro does not account for channels 4-7, which map to the second
register AD3530R_OUTPUT_OPERATING_MODE_1 for the 8 channeled device. As
a result, the bitmask is incorrectly calculated for these channels,
leading to improper configuration of the powerdown mode. Resolve this
issue by adjusting the channel index for channels 4-7 by subtracting 4
before applying the macro. This ensures that the correct bitmask is
generated for the second register.
Fixes: 93583174a3 ("iio: dac: ad3530r: Add driver for AD3530R and AD3531R")
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250626-bug_fix-v1-1-eb3c2b370f10@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Change the data type of the "adi,gain-milli" property from u32 to u16.
The devicetree binding specifies it as uint16, so we need to read it as
such to avoid an -EOVERFLOW error when parsing the property.
Fixes: c904e6dcf4 ("iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250619-iio-adc-ad7380-fix-adi-gain-milli-parsing-v1-1-4c27fb426860@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
fxls8962af_fifo_flush() uses indio_dev->active_scan_mask (with
iio_for_each_active_channel()) without making sure the indio_dev
stays in buffer mode.
There is a race if indio_dev exits buffer mode in the middle of the
interrupt that flushes the fifo. Fix this by calling
synchronize_irq() to ensure that no interrupt is currently running when
disabling buffer mode.
Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read
[...]
_find_first_bit_le from fxls8962af_fifo_flush+0x17c/0x290
fxls8962af_fifo_flush from fxls8962af_interrupt+0x80/0x178
fxls8962af_interrupt from irq_thread_fn+0x1c/0x7c
irq_thread_fn from irq_thread+0x110/0x1f4
irq_thread from kthread+0xe0/0xfc
kthread from ret_from_fork+0x14/0x2c
Fixes: 79e3a5bdd9 ("iio: accel: fxls8962af: add hw buffered sampling")
Cc: stable@vger.kernel.org
Suggested-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250603-fxlsrace-v2-1-5381b36ba1db@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AXP717 ADC channel maps is missing a sentinel entry at the end. This
causes a KASAN warning.
Add the missing sentinel entry.
Fixes: 5ba0cb9258 ("iio: adc: axp20x_adc: add support for AXP717 ADC")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20250607135627.2086850-1-wens@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The mpu3050 datasheet describes that this IC only supports one INT pin,
which means one item with two cells inside binding.
Change max to match this description.
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Fixes: 749787477a ("dt-bindings:iio:gyro:invensense,mpu3050: txt to yaml format conversion.")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250527215818.13000-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Throughout the various probe functions &indio_dev->dev is used before it
is initialized. This caused a kernel panic in st_sensors_power_enable()
when the call to devm_regulator_bulk_get_enable() fails and then calls
dev_err_probe() with the uninitialized device.
This seems to only cause a panic with dev_err_probe(), dev_err(),
dev_warn() and dev_info() don't seem to cause a panic, but are fixed
as well.
The issue is reported and traced here: [1]
Link: https://lore.kernel.org/all/AM7P189MB100986A83D2F28AF3FFAF976E39EA@AM7P189MB1009.EURP189.PROD.OUTLOOK.COM/ [1]
Cc: stable@vger.kernel.org
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://... [1]
Link: https://patch.msgid.link/20250527-st_iio_fix-v4-1-12d89801c761@gocontroll.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Mask the value read before returning it. The value read over the
parallel bus via the AXI ADC IP block contains both the address and
the data, but callers expect val to only contain the data.
axi_adc_raw_write() takes a u32 parameter, so addr was the wrong type.
This wasn't causing any issues but is corrected anyway since we are
touching the same line to add a new variable.
Cc: stable@vger.kernel.org
Fixes: 79c47485e4 ("iio: adc: adi-axi-adc: add support for AD7606 register writing")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250530-iio-adc-adi-axi-adc-fix-ad7606_bus_reg_read-v2-1-ad2dfc0694ce@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix following dt_schema warning when offload is used:
DTC [C] arch/arm/boot/dts/xilinx/zynq-zed-adv7511-ad7606.dtb
/home/angelo/dev-baylibre/linux-iio/arch/arm/boot/dts/xilinx/zynq-zed-adv7511-ad7606.dtb: adc@0: 'oneOf' conditional failed, one must be fixed:
'interrupts' is a required property
'io-backends' is a required property
from schema $id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml#
There isn't any reason that we couldn't have interrupts wired up at the
same time we are using io-backends or SPI offload, so dropping off the
related "oneOf" block entirely.
Fixes: 81fe5529e8 ("dt-bindings: iio: adc: adi,ad7606: add SPI offload properties")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250526-wip-bl-ad7606-dtschema-fixes-v2-1-9bd56d039489@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
get the correct total memory size of the system
-----BEGIN PGP SIGNATURE-----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=K5/s
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Consider secondary address mask registers in amd64_edac in order to
get the correct total memory size of the system
* tag 'edac_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Fix size calculation for Non-Power-of-Two DIMMs
accidentally cleared, leading to misconfigurations
-----BEGIN PGP SIGNATURE-----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=fjgT
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure DR6 and DR7 are initialized to their architectural values
and not accidentally cleared, leading to misconfigurations
* tag 'x86_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Initialize DR7 by writing its architectural reset value
x86/traps: Initialize DR6 by writing its architectural reset value
-----BEGIN PGP SIGNATURE-----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=yQqt
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Make sure an AUX perf event is really disabled when it overruns
* tag 'perf_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Fix pending disable flow when the AUX ring buffer overruns
avoid a double-free
-----BEGIN PGP SIGNATURE-----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=ZynV
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Make sure the new futex phash is not copied during fork in order to
avoid a double-free
* tag 'locking_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Initialize futex_phash_new during fork().
There is inconvenient for maintainers and maintainership to have
some quirks under architectural code. Move it to the specific quirk
file like other 8250-compatible drivers do.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250627182743.1273326-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'struct lpuart_soc_data' are not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security.
This also makes the code more consistent.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
172668 23470 128 196266 2feaa drivers/tty/serial/fsl_lpuart.o
After:
=====
text data bss dec hex filename
172924 23214 128 196266 2feaa drivers/tty/serial/fsl_lpuart.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/93dc860a06f92236db283c71be0640cc477b7291.1751092467.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow clock 'uartclk' and 'reg' for nxp,lpc1850-uart to align existed
driver and dts. It is really old platform. Keep the same restriction for
others.
Allow dmas and dma-names property, which allow maxItems 4 because very old
platform (arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi) use duplicate "tx", "rx",
"tx", "rx" as dma-names.
Fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: serial@40081000 (nxp,lpc1850-uart): clock-names: ['uartclk', 'reg'] is too long
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250602142745.942568-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiko Carstens says:
===================
A rather large series which is supposed to fix the crash below[1], which was
seen when running the memop kernel kvm selftest.
Problem is that cmpxchg_user_key() is executing code with a non-default
key. If a system is IPL'ed with "LOAD NORMAL", and in addition the previous
system used storage keys where the fetch-protection bit is set for some pages,
and the cmpxchg_user_key() is located within such page a protection exception
will happen when executing such code.
Idea of this series is to register all code locations running with a
non-default key at compile time. All functions, which run with a non-default
key, then must explicitly call an init function which initializes the storage
key of all pages containing such code locations with default key, which
prevents such protection exceptions.
Furthermore all functions containing code which may be executed with a
non-default access key must be marked with __kprobes to prevent out-of-line
execution of any instruction of such functions, which would result in the same
problem.
By default the kernel will not issue any storage key changing instructions
like before, which will preserve the keyless-subset mode optimizations in
hosts.
Other possible implementations which I discarded:
- Moving the code to an own section. This would require an s390 specific
change to modpost.c, which complains about section mismatches (EX_TABLE
entries in non-default text section). No other architecture has something
similar, so let's keep this architecture specific hack local.
- Just apply the default storage key to the whole kprobes text
section. However this would add special s390 semantics to the kprobes text
section, which no other architecture has. History has shown that such hacks
fire back sooner or later.
Furthermore, and to keep this whole stuff quite simple, this only works for
code locations in core kernel code, not within modules. After this series
there is no module code left with such code, and as of now I don't see any new
kernel code which runs with a non-default access key.
Note: the original crash can be reproduced by replacing
page_set_storage_key(real, PAGE_DEFAULT_KEY, 1);
with
page_set_storage_key(real, 8, 1);
in arch/s390/kernel/skey.c:__skey_regions_initialize()
And then run tools/testing/selftests/kvm/s390/memop from the kernel selftests.
[1]:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 000000000000080b
Fault in home space mode while using kernel ASCE.
AS:0000000002528007 R3:00000001ffffc007 S:00000001ffffb801 P:000000000000013d
Oops: 0004 ilc:1 [#1]SMP
Modules linked in:
CPU: 3 UID: 0 PID: 791 Comm: memop Not tainted 6.16.0-rc1-00006-g3b568201d0a6-dirty #11 NONE
Hardware name: IBM 3931 A01 704 (z/VM 7.4.0)
Krnl PSW : 0794f00180000000 000003ffe0f4d91e (__cmpxchg_user_key1+0xbe/0x190)
R:0 T:1 IO:1 EX:1 Key:9 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3
Krnl GPRS: 070003ffdfbf6af0 0000000000070000 0000000095b5a300 0000000000000000
00000000f1000000 0000000000000000 0000000000000090 0000000000000000
0000000000000040 0000000000000018 000003ff9b23d000 0000037fe0ef7bd8
000003ffdfbf7500 00000000962e4000 0000037f00ffffff 0000037fe0ef7aa0
Krnl Code: 000003ffe0f4d912: ad03f0a0 stosm 160(%r15),3
000003ffe0f4d916: a7780000 lhi %r7,0
#000003ffe0f4d91a: b20a6000 spka 0(%r6)
>000003ffe0f4d91e: b2790100 sacf 256
000003ffe0f4d922: a56f0080 llill %r6,128
000003ffe0f4d926: 5810a000 l %r1,0(%r10)
000003ffe0f4d92a: 141e nr %r1,%r14
000003ffe0f4d92c: c0e7ffffffff xilf %r14,4294967295
Call Trace:
[<000003ffe0f4d91e>] __cmpxchg_user_key1+0xbe/0x190
[<000003ffe0189c6e>] cmpxchg_guest_abs_with_key+0x2fe/0x370
[<000003ffe016d28e>] kvm_s390_vm_mem_op_cmpxchg+0x17e/0x350
[<000003ffe0173284>] kvm_arch_vm_ioctl+0x354/0x6f0
[<000003ffe015fedc>] kvm_vm_ioctl+0x2cc/0x6e0
[<000003ffe05348ae>] vfs_ioctl+0x2e/0x70
[<000003ffe0535e70>] __s390x_sys_ioctl+0xe0/0x100
[<000003ffe0f40f06>] __do_syscall+0x136/0x340
[<000003ffe0f4cb2e>] system_call+0x6e/0x90
Last Breaking-Event-Address:
[<000003ffe0f4d896>] __cmpxchg_user_key1+0x36/0x190
===================
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The inline assemblies for __cmpxchg_user_key1() and __cmpxchg_user_key2()
are identical. Get rid of the duplication and provide a common helper
function.
Suggested-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Code regions within cmpxchg_user_key() functions may be executed with a
non-default access key, which may lead to a protection exception if the
corresponding page has the fetch-protection bit enabled.
There is code in place which initializes the storage keys of such pages
when needed. However there is also the possibility of out-of-line execution
of such code in case a kprobe is set within such a region.
To avoid this problem prevent that any kprobe can be set within the
cmpxchg_user_key() functions.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The current assumption is that kernel code is always executed with access
key zero, which means that storage key protection does not apply.
However this assumption is not correct: cmpxchg_user_key() may be executed
with a non-zero key; if then the storage key of the page which belongs to
the cmpxchg_user_key() code contains a key with fetch-protection enabled
the result is a protection exception.
For several performance optimizations storage keys are not initialized on
system boot. To keep these optimizations add infrastructure which allows to
define code ranges within functions which are executed with a non-default
key. When such code is executed such functions must explicitly call
skey_regions_initialize().
This will initialize all storage keys belonging to such code ranges in a
way that no protection exceptions happen when the code is executed with a
non-default access key.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Move cmpxchg_user_key() handling to uaccess library code. The generated
code is large in any case so that there is hardly any benefit if it is
inlined.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Add memory clobbers to the page_set_storage_key() inline assemblies. This
allows for data dependencies from other code, which is important to prevent
the compiler from reordering instructions if required.
Note that this doesn't fix a bug in existing code; this is just a
prerequisite for upcoming code changes.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Add extra lines, indentations, and symbolic names for operands in
order to make the two page_set_storage_key() inline assemblies a bit
more readable.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The error code was intended to be -EINVAL here, but it was accidentally
changed to returning success. Set the error code.
Fixes: e53ee4acb2 ("octeontx2-af: CN20k basic mbox operations and structures")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on my friend's Victus 15-fb2xxx Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250627203415.56785-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add codec IDs for several NVIDIA products with HDA controllers to the
snd_hda_id_hdmi[] patch table.
Signed-off-by: Daniel Dadap <ddadap@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/aF24rqwMKFWoHu12@ddadap-lakeline.nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Commit c9b1150a68 ("drm/atomic-helper: Re-order bridge chain pre-enable
and post-disable") changed the call sequence to the CRTC enable/disable
and bridge pre_enable/post_disable methods, so those bridge methods are
now called when CRTC is not yet enabled.
This causes a lockup observed on Samsung Peach-Pit/Pi Chromebooks. The
source of this lockup is a call to fimd_dp_clock_enable() function, when
FIMD device is not yet runtime resumed. It worked before the mentioned
commit only because the CRTC implemented by the FIMD driver was always
enabled what guaranteed the FIMD device to be runtime resumed.
This patch adds runtime PM guards to the fimd_dp_clock_enable() function
to enable its proper operation also when the CRTC implemented by FIMD is
not yet enabled.
Fixes: 196e059a8a ("drm/exynos: convert clock_enable crtc callback to pipeline clock")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
If there's support for another console device (such as a TTY serial),
the kernel occasionally panics during boot. The panic message and a
relevant snippet of the call stack is as follows:
Unable to handle kernel NULL pointer dereference at virtual address 000000000000000
Call trace:
drm_crtc_handle_vblank+0x10/0x30 (P)
decon_irq_handler+0x88/0xb4
[...]
Otherwise, the panics don't happen. This indicates that it's some sort
of race condition.
Add a check to validate if the drm device can handle vblanks before
calling drm_crtc_handle_vblank() to avoid this.
Cc: stable@vger.kernel.org
Fixes: 96976c3d9a ("drm/exynos: Add DECON driver")
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
