Deletes the second initialization as the value stored to 'dev' during
its initialization (struct device *dev = &idxd->pdev->dev;) is
sufficient.
../drivers/dma/idxd/init.c:988:17: warning: Value stored to 'dev' during
its initialization is never read [deadcode.DeadStores]
988 | struct device *dev = &idxd->pdev->dev;
| ^~~ ~~~~~~~~~~~~~~~~
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250521231331.889204-1-anil.s.keshavamurthy@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This was fixed and re-introduced. 'type' is an enum, thus cast of
pointer on 64-bit compile test with W=1 causes:
mmp_tdma.c:644:9: error: cast to smaller integer type 'enum mmp_tdma_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Fixes: a67ba97dfb ("dmaengine: Use device_get_match_data()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250525-dma-fixes-v1-5-89d06dac9bcb@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document '__reserved2' and 'cmd' fields of 'struct fsl_qdma_format' to
fix W=1 warnings:
fsl-qdma.c:169 struct member '__reserved2' not described in 'fsl_qdma_format'
fsl-qdma.c:169 struct member 'cmd' not described in 'fsl_qdma_format'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250525-dma-fixes-v1-4-89d06dac9bcb@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250618-restricted-pointers-dma-v2-1-bc39dafc201d@linutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DMA operates in Double Buffer Mode (DBM) when the transfer is cyclic and
there are at least two periods.
When DBM is enabled, the DMA toggles between two memory targets (SxM0AR and
SxM1AR), indicated by the SxSCR.CT bit (Current Target).
There is no need to update the next memory address if two periods are
configured, as SxM0AR and SxM1AR are already properly set up before the
transfer begins in the stm32_dma_start_transfer() function.
This avoids unnecessary updates to SxM0AR/SxM1AR, thereby preventing
potential Transfer Errors. Specifically, when the channel is enabled,
SxM0AR and SxM1AR can only be written if SxSCR.CT=1 and SxSCR.CT=0,
respectively. Otherwise, a Transfer Error interrupt is triggered, and the
stream is automatically disabled.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250624-stm32_dma_dbm_fix-v1-1-337c40d6c93e@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Recently it uses llvm and capstone to speed up annotation or disassembly
of instructions. But they don't support source code view yet. Until it
fixed, we can force to use objdump for source code annotation.
To prevent performance loss, it's disabled by default and turned it on
when user requests it in TUI by pressing 's' key.
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250625230339.702610-1-namhyung@kernel.org
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
smp_call_function_any() tries to make a local call as it's the cheapest
option, or switches to a CPU in the same node. If it's not possible, the
algorithm gives up and searches for any CPU, in a numerical order.
Instead, it can search for the best CPU based on NUMA locality, including
the 2nd nearest hop (a set of equidistant nodes), and higher.
sched_numa_find_nth_cpu() does exactly that, and also helps to drop most
of the housekeeping code.
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250623000010.10124-2-yury.norov@gmail.com
Extend the Rust sample platform driver to probe using device/driver name
matching, OF ID table matching, or ACPI ID table matching.
Signed-off-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://lore.kernel.org/r/20250620154552.299932-1-igor.korotin.linux@gmail.com
[ Use 'LNUXBEEF' as ACPI ID. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Extend the `platform::Driver` trait to support ACPI device matching by
adding the `ACPI_ID_TABLE` constant.
This allows Rust platform drivers to define ACPI match tables alongside
their existing OF match tables. These changes mirror the existing OF
support and allow Rust platform drivers to match devices based on ACPI
identifiers.
Signed-off-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://lore.kernel.org/r/20250620154334.298320-1-igor.korotin.linux@gmail.com
[ Use 'LNUXBEEF' as ACPI ID. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Provide a default value of `None` for `Driver::OF_ID_TABLE` to simplify
driver implementations.
Drivers that do not require OpenFirmware matching no longer need to
import the `of` module or define the constant explicitly.
This reduces unnecessary boilerplate and avoids pulling in unused
dependencies.
Signed-off-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://lore.kernel.org/r/20250620154124.297158-1-igor.korotin.linux@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Extend the `Adapter` trait to support ACPI device identification.
This mirrors the existing Open Firmware (OF) support (`of_id_table`) and
enables Rust drivers to match and retrieve ACPI-specific device data
when `CONFIG_ACPI` is enabled.
To avoid breaking compilation, a stub implementation of `acpi_id_table()`
is added to the Platform adapter; the full implementation will be provided
in a subsequent patch.
Signed-off-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://lore.kernel.org/r/20250620153914.295679-1-igor.korotin.linux@gmail.com
[ Fix clippy warning if #[cfg(not(CONFIG_OF))]; fix checkpatch.pl line
length warnings. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Refactor the `of_id_info` methods in the `Adapter` trait to reduce
duplication. Previously, the method had two versions selected
via `#[cfg(...)]` and `#[cfg(not(...))]`. This change merges them into a
single method by using `#[cfg]` blocks within the method body.
Suggested-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://lore.kernel.org/r/20250620153656.294468-1-igor.korotin.linux@gmail.com
[ Fix clippy warning if #[cfg(not(CONFIG_OF))]; fix checkpatch.pl line
length warnings. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
`acpi::DeviceId` is an abstraction around `struct acpi_device_id`.
Enable drivers to build ACPI device ID tables, to be consumed by the
corresponding bus abstractions, such as platform or I2C.
Signed-off-by: Igor Korotin <igor.korotin.linux@gmail.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20250620152425.285683-1-igor.korotin.linux@gmail.com
[ Always inline DeviceId::new() and use &'static CStr; slightly reword
commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
According to Bspec, bits 0~9 of MI_STORE_DATA_IMM must not exceed 0x3FE.
The macro MI_SDI_NUM_QW(x) evaluates to 2 * x + 1, which means the
condition 2 * x + 1 <= 0x3FE must be satisfied. Therefore, the maximum
valid value for x is 0x1FE, not 0x1FF.
v2
- Replace 0x1fe with macro MAX_PTE_PER_SDI (Auld, Matthew & Patelczyk, Maciej)
v3
- Change macro MAX_PTE_PER_SDI from 0x1fe to 0x1feU (De Marchi, Lucas)
Bspec: 60246
Fixes: 9c44fd5f6e ("drm/xe: Add migrate layer functions for SVM support")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Brian3 Nguyen <brian3.nguyen@intel.com>
Cc: Alex Zuo <alex.zuo@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Suggested-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Jia Yao <jia.yao@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Link: https://lore.kernel.org/r/20250612224620.161105-1-jia.yao@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Clean up error handling by using devm functions and dev_err_probe(). This
should make it easier to add new code, as we can eliminate the "goto
ladder" in sun4i_dma_probe().
Suggested-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20250625085450.154280-2-csokas.bence@prolan.hu
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add check to proceed handling SoundWire interrupts when valid
status is reported in any one of the status registers.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250620102617.73437-2-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
To clear the valid result status, 1 should be written to
ACP_SDW_IMM_CMD_STS register. Update the ACP_SW_IMM_CMD_STS register value
as 1.
Fixes: d8f48fbdfd ("soundwire: amd: Add support for AMD Manager driver")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250620102617.73437-1-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Works:
* Both speakers
* Both MICs
* Headphones jack, L/R channels
* Headphones jack, MIC
Now working/untested:
* Sound over DisplayPort
* Sound over HDMI
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250623113709.21184-3-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It appears not the latest version of the patch was merged. Align with
latest upstreamed version by correcting GPU enable location and typo
in GPU firmware path for x1p42100 variant.
Fixes: 6516961352 ("arm64: dts: qcom: Add support for X1-based Asus Zenbook A14")
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250623113709.21184-2-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
rt721 has wake capability. Add it to the wake_capable_list.
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20250626060937.405978-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DisCo properties should be mipi-sdw-paging-supported and
mipi-sdw-bank-delay-supported, with an 'ed' on the end. Correct the
property names used in sdw_slave_read_prop().
The internal flag bank_delay_support is currently unimplemented, so that
being read wrong does not currently affect anything. The two existing
users for this helper and the paging_support flag rt1320-sdw.c and
rt721-sdca-sdw.c both manually set the flag in their slave properties,
thus are not affected by this bug either.
Fixes: 56d4fe31af ("soundwire: Add MIPI DisCo property helpers")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250624125507.2866346-1-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When a PCIe device detects an error, it logs the error locally and issues
an error Message routed to the Root Complex (PCIe r6.0, sec 6.2.5). If the
Root Port or RCEC supports AER and Linux has enabled the AER interrupt,
aer_isr() traverses the relevant devices and adds those with AER errors
logged to the aer_err_info.dev[] array for error logging and recovery.
If aer_isr() finds more than AER_MAX_MULTI_ERR_DEVICES devices with AER
errors logged, it silently ignores them, and those extra devices are not
included in the recovery flow.
Emit an error message if we find more than AER_MAX_MULTI_ERR_DEVICES
devices with AER errors logged.
Testing details at link below.
Signed-off-by: Akshay Jindal <akshayaj.lkd@gmail.com>
[bhelgaas: commit log, join error message]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250619185041.73240-1-akshayaj.lkd@gmail.com
It feels to me like load is closer to the intention than init_hw.
It makes the init calls slightly less confusing to me. :)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250619104858.418440-24-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
xe_uc_init_hw() is called multiple times from xe_gt.c,
and that makes the name xe_uc_fini_hw(), called for a different
reason in xe_guc.c confusing.
Remove it and inline the xe_uc_sanitize_reset into xe_guc.c directly.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250619104858.418440-23-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Now that all previous allocations are gone, ensure no new allocations
will ever be done before xe_display_init_early(), by moving the call
that allows allocations downwards.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250619104858.418440-21-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Now that we added the separate step of initialising GUC in
xe_gt_init_early, it should be ok to initialise the minimum during early
init, and the rest after allocations are allowed.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250619104858.418440-20-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
s/gt_fw_domain_init/gt_init_with_gt_forcewake()/
s/all_fw_domain_init/gt_init_with_all_forcewake()/
Clarify that the functions are the part of gt_init() that are called
with the respective power domains held. all_domain() of course only
works after discovering and initialisation of force_wake on all engines,
that's why the split is needed in the first place.
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250619104858.418440-19-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
After discussion with Lucas De Marchi, it turns out that is the
specific caller requiring a dump. This allows us to cleanup
gt_init in a bit.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250619104858.418440-18-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
After mcr_init_early, we need to be able to do VRAM and CCS probing
without hwconfig probe. Fortunately the relevant registers are all
instance 0, which fortunately means no dependencies on further initialization
is required.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250619104858.418440-17-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Add a 2-stage GuC init. An early one for everything that is needed
for VF, and a full one that loads GuC and is allowed to do allocations.
Link: https://lore.kernel.org/r/20250619104858.418440-16-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
We want to split up GUC init to an alloc and noalloc part to keep the
init path the same for VF and !VF as much as possible.
Everything in vf_guc_init should be done as early as possible, otherwise
VRAM probing becomes impossible.
Also move xe_gt_mmio_init to the end of xe_gt_init_early(), cleaning up
the init in xe_device slightly.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250619104858.418440-15-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
memirqs require allocations into GGTT, which we cannot use until
after display is enabled.
Now that the initialisation of interrupts is postponed, move memirq
init too.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ilia Levi <ilia.levi@intel.com>
Link: https://lore.kernel.org/r/20250619104858.418440-14-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
- Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were
applied for nios2, but never sent upstream.
- Fix extra '/' in fsl,ls1028a-reset '$id' path
- Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref.
-----BEGIN PGP SIGNATURE-----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=ppJ5
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were
applied for nios2, but never sent upstream.
- Fix extra '/' in fsl,ls1028a-reset '$id' path
- Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref.
* tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: serial: Convert altr,uart-1.0 to DT schema
dt-bindings: serial: Convert altr,juart-1.0 to DT schema
dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id
dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings
Octal permissions are preferred over the symbolics ones
for readbility. This ceases warning message pointed by checkpatch.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250612201321.3536493-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace ternary (condition ? "enabled" : "disabled") with
str_enabled_disabled() from string_choices.h to improve readability,
maintain uniform string usage, and reduce binary size through linker
deduplication.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250612201321.3536493-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With `make W=1` build we get a warning:
drivers/acpi/proc.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
Fix it by removing unused inclusion.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250612201321.3536493-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The format string in acpi_system_wakeup_device_seq_show() uses incorrect
specifier along with explicit (unneeded) casting. Drop the latter and
update the former.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250612201321.3536493-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Early in kernel boot pointers can't be used and so %p shows up
incorrectly:
```
extrace-0138 ex_trace_point : Method Begin [0x(____ptrval____):\M460] execution.
```
Later in the boot %p works, but it's not really actually useful when
the pathname can resolve properly.
Adjust the debug print so that if the Pathname resolves that the pointer
isn't also printed:
```
extrace-0138 ex_trace_point : Method Begin [\M460] execution.
```
Link: https://github.com/acpica/acpica/pull/1013
Link: bdc2a4e646
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250609032839.525087-1-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
