Prevent other bits of mailbox power limit from being overwritten with 0.
This issue was due to a missing read and modify of current power limit,
before setting a requested mailbox power limit, which is added in this
patch.
v2:
- Improve commit message. (Anshuman)
v3:
- Rebase.
- Rephrase commit message. (Riana)
- Add read-modify-write variant of xe_hwmon_pcode_write_power_limit()
i.e. xe_hwmon_pcode_rmw_power_limit(). (Badal)
- Use xe_hwmon_pcode_rmw_power_limit() to set mailbox power limits.
- Remove xe_hwmon_pcode_write_power_limit() as all mailbox power limits
writes use xe_hwmon_pcode_rmw_power_limit() only.
v4:
- Use PWR_LIM in place of (PWR_LIM_EN | PWR_LIM_VAL) wherever
applicable. (Riana)
Fixes: 25a2aa779f ("drm/xe/hwmon: Add support to manage power limits though mailbox")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://lore.kernel.org/r/20250617120030.612819-1-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8aa7306631)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
I thought array declaration might be done in the same line as assigning the value
to it.
Hence, getting rid of extra steps of reiterating the array name.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Link: https://lore.kernel.org/r/20250611100256.31089-1-unixbhaskar@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
perl is not universal on all machines and should be replaced with awk,
which is much more common.
Before:
$ perf test "probe libc's inet_pton & backtrace it with ping" -v
--- start ---
test child forked, pid 145431
grep: Perl matching not supported in a --disable-perl-regexp build
FAIL: could not add event
---- end(-1) ----
121: probe libc's inet_pton & backtrace it with ping : FAILED!
After:
$ perf test "probe libc's inet_pton & backtrace it with ping" -v
121: probe libc's inet_pton & backtrace it with ping : Ok
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250620174034.819894-1-ctshao@google.com
[ fold James' suggestion not to escape _ in the event pattern. ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Remove the use of `Ktime` from the hrtimer code, which was originally
introduced as a temporary workaround. The hrtimer has now been fully
converted to use the `Instant` and `Delta` types instead.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250610132823.3457263-6-fujita.tomonori@gmail.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Add a `TimerMode` associated type to the `HasHrTimer` trait to
represent the operational mode of the timer, such as absolute or
relative expiration. This new type must implement the `HrTimerMode`
trait, which defines how expiration values are interpreted.
Update the `start()` method to accept an `expires` parameter of type
`<Self::TimerMode as HrTimerMode>::Expires` instead of the fixed `Ktime`.
This enables different timer modes to provide strongly typed expiration
values, such as `Instant<C>` or `Delta`.
The `impl_has_hr_timer` macro is also extended to allow specifying the
`HrTimerMode`. In the following example, it guarantees that the
`start()` method for `Foo` only accepts `Instant<Monotonic>`. Using a
`Delta` or an `Instant` with a different clock source will result in a
compile-time error:
struct Foo {
#[pin]
timer: HrTimer<Self>,
}
impl_has_hr_timer! {
impl HasHrTimer<Self> for Foo {
mode : AbsoluteMode<Monotonic>,
field : self.timer
}
}
This design eliminates runtime mismatches between expires types and
clock sources, and enables stronger type-level guarantees throughout
hrtimer.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250610132823.3457263-5-fujita.tomonori@gmail.com
[ changed conversion method names to `as_*` - Andreas ]
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Introduce the `HrTimerExpires` trait to represent types that can be
used as expiration values for high-resolution timers. Define a
required method, `into_nanos()`, which returns the expiration time as a
raw nanosecond value suitable for use with C's hrtimer APIs.
Also extend the `HrTimerMode` to use the `HrTimerExpires` trait.
This refactoring is a preparation for enabling hrtimer code to work
uniformly with both absolute and relative expiration modes.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250610132823.3457263-4-fujita.tomonori@gmail.com
[ changed conversion method names to `as_*` - Andreas ]
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Only need the flush for DPT host updates here. Normal GGTT updates don't
need special flush.
Fixes: 01570b4469 ("drm/xe/bmg: implement Wa_16023588340")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606104546.1996818-4-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Flushing l2 is only needed after all data has been written.
Fixes: 01570b4469 ("drm/xe/bmg: implement Wa_16023588340")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250606104546.1996818-3-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
A missed evsel__close before evsel__delete was the source of leaking
perf events due to a hybrid test. Add asserts in debug builds so that
this shouldn't happen in the future. Add puts missing on the cpu map
and thread maps.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250617223356.2752099-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Caught by leak sanitizer running "perf trace BTF general tests". Make
the ordered_events initialization unconditional and early so that
trace__exit cleanup is simple - ordered_events__init doesn't allocate
and just sets up 4 values and inits 3 list heads.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250617223356.2752099-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When processing the perf data file generated with multiple events,
the flamegraph script will count all the events regardless of
different event names.
This patch tries to add a -e option to specify the event name that
the flamegraph will be generated accordingly. If the -e option omitted,
the behavior remains unchanged.
Signed-off-by: Tianyou Li <tianyou.li@intel.com>
Reviewed-by: Pan Deng <pan.deng@intel.com>
Reviewed-by: Zhiguo Zhou <zhiguo.zhou@intel.com>
Reviewed-by: Wangyang Guo <wangyang.guo@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20250610040536.2390060-2-tianyou.li@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If specify the perf data file with -i option, the script will try to
read the header information regardless of the file name specified,
instead it will try to access the perf.data. This simple patch use the
file name from -i option for command perf report --header-only to read
the header.
Signed-off-by: Tianyou Li <tianyou.li@intel.com>
Reviewed-by: Pan Deng <pan.deng@intel.com>
Reviewed-by: Zhiguo Zhou <zhiguo.zhou@intel.com>
Reviewed-by: Wangyang Guo <wangyang.guo@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20250610040536.2390060-1-tianyou.li@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The STRARRAY macro is to print values in a pre-defined array. But
sometimes it hides the value because it's 0. The value of 0 can have a
meaning in this case so set 'show_zero' field.
For example, it can show CREATE_MAP cmd in the bpf syscall.
Acked-by: Howard Chu <howardchu95@gmail.com>
Link: https://lore.kernel.org/r/20250502204056.973977-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Without the change `perf `hangs up on charaster devices. On my system
it's enough to run system-wide sampler for a few seconds to get the
hangup:
$ perf record -a -g --call-graph=dwarf
$ perf report
# hung
`strace` shows that hangup happens on reading on a character device
`/dev/dri/renderD128`
$ strace -y -f -p 2780484
strace: Process 2780484 attached
pread64(101</dev/dri/renderD128>, strace: Process 2780484 detached
It's call trace descends into `elfutils`:
$ gdb -p 2780484
(gdb) bt
#0 0x00007f5e508f04b7 in __libc_pread64 (fd=101, buf=0x7fff9df7edb0, count=0, offset=0)
at ../sysdeps/unix/sysv/linux/pread64.c:25
#1 0x00007f5e52b79515 in read_file () from /<<NIX>>/elfutils-0.192/lib/libelf.so.1
#2 0x00007f5e52b25666 in libdw_open_elf () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#3 0x00007f5e52b25907 in __libdw_open_file () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#4 0x00007f5e52b120a9 in dwfl_report_elf@@ELFUTILS_0.156 ()
from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#5 0x000000000068bf20 in __report_module (al=al@entry=0x7fff9df80010, ip=ip@entry=139803237033216, ui=ui@entry=0x5369b5e0)
at util/dso.h:537
#6 0x000000000068c3d1 in report_module (ip=139803237033216, ui=0x5369b5e0) at util/unwind-libdw.c:114
#7 frame_callback (state=0x535aef10, arg=0x5369b5e0) at util/unwind-libdw.c:242
#8 0x00007f5e52b261d3 in dwfl_thread_getframes () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#9 0x00007f5e52b25bdb in get_one_thread_cb () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#10 0x00007f5e52b25faa in dwfl_getthreads () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#11 0x00007f5e52b26514 in dwfl_getthread_frames () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#12 0x000000000068c6ce in unwind__get_entries (cb=cb@entry=0x5d4620 <unwind_entry>, arg=arg@entry=0x10cd5fa0,
thread=thread@entry=0x1076a290, data=data@entry=0x7fff9df80540, max_stack=max_stack@entry=127,
best_effort=best_effort@entry=false) at util/thread.h:152
#13 0x00000000005dae95 in thread__resolve_callchain_unwind (evsel=0x106006d0, thread=0x1076a290, cursor=0x10cd5fa0,
sample=0x7fff9df80540, max_stack=127, symbols=true) at util/machine.c:2939
#14 thread__resolve_callchain_unwind (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, sample=0x7fff9df80540,
max_stack=127, symbols=true) at util/machine.c:2920
#15 __thread__resolve_callchain (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, evsel@entry=0x7fff9df80440,
sample=0x7fff9df80540, parent=parent@entry=0x7fff9df804a0, root_al=root_al@entry=0x7fff9df80440, max_stack=127, symbols=true)
at util/machine.c:2970
#16 0x00000000005d0cb2 in thread__resolve_callchain (thread=<optimized out>, cursor=<optimized out>, evsel=0x7fff9df80440,
sample=<optimized out>, parent=0x7fff9df804a0, root_al=0x7fff9df80440, max_stack=127) at util/machine.h:198
#17 sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=parent@entry=0x7fff9df804a0,
evsel=evsel@entry=0x106006d0, al=al@entry=0x7fff9df80440, max_stack=max_stack@entry=127) at util/callchain.c:1127
#18 0x0000000000617e08 in hist_entry_iter__add (iter=iter@entry=0x7fff9df80480, al=al@entry=0x7fff9df80440, max_stack_depth=127,
arg=arg@entry=0x7fff9df81ae0) at util/hist.c:1255
#19 0x000000000045d2d0 in process_sample_event (tool=0x7fff9df81ae0, event=<optimized out>, sample=0x7fff9df80540,
evsel=0x106006d0, machine=<optimized out>) at builtin-report.c:334
#20 0x00000000005e3bb1 in perf_session__deliver_event (session=0x105ff2c0, event=0x7f5c7d735ca0, tool=0x7fff9df81ae0,
file_offset=2914716832, file_path=0x105ffbf0 "perf.data") at util/session.c:1367
#21 0x00000000005e8d93 in do_flush (oe=0x105ffa50, show_progress=false) at util/ordered-events.c:245
#22 __ordered_events__flush (oe=0x105ffa50, how=OE_FLUSH__ROUND, timestamp=<optimized out>) at util/ordered-events.c:324
#23 0x00000000005e1f64 in perf_session__process_user_event (session=0x105ff2c0, event=0x7f5c7d752b18, file_offset=2914835224,
file_path=0x105ffbf0 "perf.data") at util/session.c:1419
#24 0x00000000005e47c7 in reader__read_event (rd=rd@entry=0x7fff9df81260, session=session@entry=0x105ff2c0,
--Type <RET> for more, q to quit, c to continue without paging--
quit
prog=prog@entry=0x7fff9df81220) at util/session.c:2132
#25 0x00000000005e4b37 in reader__process_events (rd=0x7fff9df81260, session=0x105ff2c0, prog=0x7fff9df81220)
at util/session.c:2181
#26 __perf_session__process_events (session=0x105ff2c0) at util/session.c:2226
#27 perf_session__process_events (session=session@entry=0x105ff2c0) at util/session.c:2390
#28 0x0000000000460add in __cmd_report (rep=0x7fff9df81ae0) at builtin-report.c:1076
#29 cmd_report (argc=<optimized out>, argv=<optimized out>) at builtin-report.c:1827
#30 0x00000000004c5a40 in run_builtin (p=p@entry=0xd8f7f8 <commands+312>, argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0)
at perf.c:351
#31 0x00000000004c5d63 in handle_internal_command (argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0) at perf.c:404
#32 0x0000000000442de3 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:448
#33 main (argc=<optimized out>, argv=0x7fff9df844b0) at perf.c:556
The hangup happens because nothing in` perf` or `elfutils` checks if a
mapped file is easily readable.
The change conservatively skips all non-regular files.
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250505174419.2814857-1-slyich@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
These are leftovers noticed while updating a build container.
We don't need those so that test-all.c can build and thus speed up the
feature detection.
Test for those features only if the user asks for BUILD_NONDISTRO=1 to
build with libbfd.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250620212435.93846-4-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Just to follow the pattern with other devel packages.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250620212435.93846-3-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Just tidying up the suggestion to pick the latest and not some specific
version.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250620212435.93846-2-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When building the kernel using the llvm-18.1.3-rust-1.85.0-x86_64
toolchain provided by kernel.org, the following symbols are generated:
$ nm vmlinux | grep ' _R'.*Task | rustfilt
... T <kernel::task::Task>::get_pid_ns
... T <kernel::task::Task>::tgid_nr_ns
... T <kernel::task::Task>::current_pid_ns
... T <kernel::task::Task>::signal_pending
... T <kernel::task::Task>::uid
... T <kernel::task::Task>::euid
... T <kernel::task::Task>::current
... T <kernel::task::Task>::wake_up
... T <kernel::task::Task as kernel::types::AlwaysRefCounted>::dec_ref
... T <kernel::task::Task as kernel::types::AlwaysRefCounted>::inc_ref
These Rust symbols are trivial wrappers around the C functions. It
doesn't make sense to go through a trivial wrapper for these functions,
so mark them inline.
[boqun: Capitalize the title, reword a bit to avoid listing all the C
functions as the code already shows them and remove the addresses of the
symbols in the commit log as they are different from build to build.]
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Panagiotis Foliadis <pfoliadis@posteo.net>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250315-inline-c-wrappers-v3-1-048e43fcef7d@posteo.net
When building the kernel using the llvm-18.1.3-rust-1.85.0-x86_64
with ARCH=arm64, the following symbols are generated:
$nm vmlinux | grep ' _R'.*PollCondVar | rustfilt
... T <kernel::sync::poll::PollCondVar as kernel::init::PinnedDrop>::drop
...
This Rust symbol is trivial wrappers around the C functions
__wake_up_pollfree() and synchronize_rcu(). It doesn't make sense to go
through a trivial wrapper for its functions, so mark it inline.
[boqun: Reword the commit title and re-format the commit log per tip
tree's requirement, remove unnecessary information from "nm vmlinux"
result.]
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Kunwu Chan <kunwu.chan@hotmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250317025205.2366518-1-kunwu.chan@linux.dev
When build the kernel using the llvm-18.1.3-rust-1.85.0-x86_64
with ARCH=arm64, the following symbols are generated:
$nm vmlinux | grep ' _R'.*CondVar | rustfilt
... T <kernel::sync::condvar::CondVar>::notify_all
... T <kernel::sync::condvar::CondVar>::notify_one
... T <kernel::sync::condvar::CondVar>::notify_sync
...
These notify_*() symbols are trivial wrappers around the C functions
__wake_up() and __wake_up_sync(). It doesn't make sense to go through
a trivial wrapper for these functions, so mark them inline.
[boqun: Reword the commit title for consistency and reformat the commit
log.]
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Co-developed-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Kunwu Chan <kunwu.chan@hotmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250324061835.1693125-1-kunwu.chan@linux.dev
Limit GT max frequency to 2600MHz and wait for frequency to reduce
before proceeding with a transient flush. This is really only needed for
the transient flush: if L2 flush is needed due to 16023588340 then
there's no need to do this additional wait since we are already using
the bigger hammer.
v2: Use generic names, ensure user set max frequency requests wait
for flush to complete (Rodrigo)
v3:
- User requests wait via wait_var_event_timeout (Lucas)
- Close races on flush + user requests (Lucas)
- Fix xe_guc_pc_remove_flush_freq_limit() being called on last gt
rather than root gt (Lucas)
v4:
- Only apply the freq reducing part if a TDF is needed: L2 flush trumps
the need for waiting a lower frequency
Fixes: aaa08078e7 ("drm/xe/bmg: Apply Wa_22019338487")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-4-b888388477f2@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
xe_device_td_flush() has 2 possible implementations: an entire L2 flush
or a transient flush, depending on WA 16023588340. Make this clear by
splitting the function so it calls each of them.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-3-b888388477f2@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
pc_set_mert_freq_cap() currently lock()/unlock() the mutex multiple times
to stash the current frequencies. It's not a problem since
xe_guc_pc_restore_stashed_freq() is guaranteed to be called only later
in the init sequence. However, now that we have _locked() variants for
this functions, use them and avoid potential issues when called from
other places or using the same pattern.
While at it, prefer and early return for the WA check to reduce
indentation.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-2-b888388477f2@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
There are places in which the getters/setters are called one after the
other causing a multiple lock()/unlock(). These are not currently a
problem since they are all happening from the same thread, but there's a
race possibility as calls are added outside of the early init when the
max/min and stashed values need to be correlated.
Add the _locked() variants to prepare for that.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-1-b888388477f2@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Trace events can take up to 5K each when they are defined, regardless if
they are used or not. The binder lock events: binder_lock, binder_locked
and binder_unlock are no longer used.
Remove them.
Fixes: a60b890f60 ("binder: remove global binder lock")
Signed-off-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20250612093408.3b7320fa@batman.local.home
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "pid:tid" format is used consistently throughout the driver's logs
with the exception of this one place where the arguments are reversed.
Let's fix that. Also, collapse a multi-line comment into a single line.
Cc: Steven Moreland <smoreland@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250605141930.1069438-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
misc_init() returns -EIO for __register_chrdev() invocation failure, but:
- -EIO is for I/O error normally, but __register_chrdev() does not do I/O.
- -EIO can not cover various error codes returned by __register_chrdev().
Fix by returning error code of __register_chrdev().
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250620-fix_mischar-v1-3-6c2716bbf1fa@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Header miscdevice.h includes linux/device.h which has definations for
below two forward declarations directly or indirectly:
struct device;
struct attribute_group;
Remove these redundant forward declarations from miscdevice.h
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250620-fix_mischar-v1-1-6c2716bbf1fa@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add test cases for static and dynamic minor number allocation and
deallocation.
While at it, improve description and test suite name.
Some of the cases include:
- that static and dynamic allocation reserved the expected minors.
- that registering duplicate minors or duplicate names will fail.
- that failing to create a sysfs file (due to duplicate names) will
deallocate the dynamic minor correctly.
- that dynamic allocation does not allocate a minor number in the static
range.
- that there are no collisions when mixing dynamic and static allocations.
- that opening devices with various minor device numbers work.
- that registering a static number in the dynamic range won't conflict with
a dynamic allocation.
This last test verifies the bug fixed by commit 6d04d2b554 ("misc:
misc_minor_alloc to use ida for all dynamic/misc dynamic minors") has not
regressed.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20250612-misc-dynrange-v5-1-6f35048f7273@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for the Realtek RTS5264 Version B
card reader controller.
To support this chip revision, the driver introduces specific
initialization logic to handle the hardware requirements of
Version B. The probe flow is updated to detect this version
and apply the necessary register configurations.
Additionally, the initialization sequence for Version B has
been optimized to improve robustness and ensure proper device
setup during power-on.
These changes ensure correct operation and compatibility with
systems using RTS5264 Version B.
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20250620071325.1887017-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace scnprintf() with sysfs_emit() in sysfs show functions.
These helpers are preferred in sysfs callbacks because they automatically
handle buffer size and improve safety and readability.
Signed-off-by: Ankit Chauhan <ankitchauhan2065@gmail.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20250620024705.11321-1-ankitchauhan2065@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vmci_qpair_dequeue(), vmci_qpair_enqueue() and vmci_qpair_peek()
were added in 2013 by
commit 06164d2b72 ("VMCI: queue pairs implementation.")
but have remained unused.
Remove them.
(The iov version of those functions is used)
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250614010344.636076-4-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vmci_doorbell_notify() was added in 2013 by
commit 83e2ec765b ("VMCI: doorbell implementation.")
but has remained unused.
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250614010344.636076-3-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vmci_ctx_dbell_destroy_all() and vmci_ctx_pending_datagrams()
were added in 2013 by
commit 28d6692cd8 ("VMCI: context implementation.")
but have remained unused.
Remove them.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250614010344.636076-2-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Like s390 and the jailhouse hypervisor, LoongArch's PCI architecture allows
passing isolated PCI functions to a guest OS instance. So it is possible
that there is a multi-function device without function 0 for the host or
guest.
Allow probing such functions by adding a IS_ENABLED(CONFIG_LOONGARCH) case
in the hypervisor_isolated_pci_functions() helper.
This is similar to commit 189c6c33ff ("PCI: Extend isolated function
probing to s390").
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250624062927.4037734-1-chenhuacai@loongson.cn
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().
So use the dev_fwnode() helper.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250611104348.192092-14-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The binary attribute const changes recently for the sram driver were
made in a way that hid the fact that we would be casting a const pointer
to a non-const one. So explicitly make the cast so that it is obvious
and preserve the const pointer in the sram_reserve_cmp() function.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Fixes: c3b8c358c4 ("misc: sram: constify 'struct bin_attribute'")
Link: https://lore.kernel.org/r/2025052125-squid-sandstorm-a418@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It already depends on X86_32, but that's also set for ARCH=um.
Recent changes made UML no longer have IO port access since
it's not needed, but this driver uses it. Build it only for
HAS_IOPORT. This is pretty much the same as depending on X86,
but on the off-chance that HAS_IOPORT will ever be optional
on x86 HAS_IOPORT is the real prerequisite.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506060742.XR3HcxWA-lkp@intel.com/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250606071255.7722-2-johannes@sipsolutions.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vendor `st,spi-midi-ns` property is no longer needed and
has been deprecated in favor of a generic solution.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250616-spi-upstream-v1-6-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The `st,spi-midi-ns` property, which was used to set a nanosecond delay
between transferred words, is now deprecated.
This functionality is now supported by the SPI framework through the
`spi_transfer` struct's `word_delay` variable.
Therefore, the private `st,spi-midi-ns` property is no longer needed and
has been deprecated in favor of the generic solution.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250616-spi-upstream-v1-5-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The STM32 DMA doesn't have the ability to generate convenient burst
transfer on the DDR, ensuring the best load of the AXI & DDR.
To avoid this bad load of the AXI & DDR, STM32 MDMA can be used to transfer
data to the DDR, being triggered by STM32 DMA channel transfer
completion.
An SRAM buffer is used between DMA and MDMA. So the MDMA always does
MEM_TO_MEM transfers (from/to SRAM to/from DDR), and the DMA uses SRAM
instead of DDR with DEV_TO_MEM transfers.
SPI RX DMA (DEV_TO_MEM) becomes:
SPI RX FIFO ==DMA==> SRAM ==MDMA==> DDR
In RX (DEV_TO_MEM), EOT interrupt is used to pause the DMA channel (which
will raise a transfer complete) to trigger the MDMA to flush the SRAM (when
transfer length is not aligned on SRAM period).
TX remains on the former implementation.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250616-spi-upstream-v1-4-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The stm32_spi_probe function now includes a check to ensure that the
pointer returned by of_device_get_match_data is not NULL before
accessing its members. This resolves a warning where a potential NULL
pointer dereference could occur when accessing cfg->has_device_mode.
Before accessing the 'has_device_mode' member, we verify that 'cfg' is
not NULL. If 'cfg' is NULL, an error message is logged.
This change ensures that the driver does not attempt to access
configuration data if it is not available, thus preventing a potential
system crash due to a NULL pointer dereference.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310191831.MLwx1c6x-lkp@intel.com/
Fixes: fee681646f ("spi: stm32: disable device mode with st,stm32f4-spi compatible")
Link: https://patch.msgid.link/20250616-spi-upstream-v1-2-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The spi ready functionality is supported by our peripheral in host and
target modes on STM32MP2x SoCs.
Update our spi controller driver to allow devices to use this
functionality.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250616-spi-upstream-v1-1-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Having PM put sync in remove function is causing PM underflow during
remove operation. This is caused by the function, runtime_pm_get_sync,
not being called anywhere during the op. Ensure that calls to
pm_runtime_enable()/pm_runtime_disable() and
pm_runtime_get_sync()/pm_runtime_put_sync() match.
echo 108d2000.spi > /sys/bus/platform/drivers/cadence-qspi/unbind
[ 49.644256] Deleting MTD partitions on "108d2000.spi.0":
[ 49.649575] Deleting u-boot MTD partition
[ 49.684087] Deleting root MTD partition
[ 49.724188] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
Continuous bind/unbind will result in an "Unbalanced pm_runtime_enable" error.
Subsequent unbind attempts will return a "No such device" error, while bind
attempts will return a "Resource temporarily unavailable" error.
[ 47.592434] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
[ 49.592233] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128)
[ 53.232309] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
[ 55.828550] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128)
[ 57.940627] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
[ 59.912490] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128)
[ 61.876243] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
[ 61.883000] platform 108d2000.spi: Unbalanced pm_runtime_enable!
[ 532.012270] cadence-qspi 108d2000.spi: probe with driver cadence-qspi failed1
Also, change clk_disable_unprepare() to clk_disable() since continuous
bind and unbind operations will trigger a warning indicating that the clock is
already unprepared.
Fixes: 4892b374c9 ("mtd: spi-nor: cadence-quadspi: Add runtime PM support")
cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/4e7a4b8aba300e629b45a04f90bddf665fbdb335.1749601877.git.khairul.anuar.romli@altera.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All ath drivers:
Add "#include <linux/export.h>" to all files that use EXPORT_SYMBOL()
to fix a newly introduced 'make W=1' check. Note that check has
subsequently been changed to only test when W=2, but keep the fixes to
suppress the warning for 'make W=2'.
ath12k:
Properly handle scan requests on multi-radio wiphy devices.
Perform the usual set of bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCaFq4qwAKCRAsFbugiYzL
e9nKAQC0wQ9QR53BFLGVu3TpR2hbaVaJmYlxCtf+DbrEUbOe1gEAgp2Cz0NdjUaQ
IABFyUquZS/ZAkqytpjXMvoilyDawAg=
=bBFE
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20250624' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git patches for v6.17
All ath drivers:
Add "#include <linux/export.h>" to all files that use EXPORT_SYMBOL()
to fix a newly introduced 'make W=1' check. Note that check has
subsequently been changed to only test when W=2, but keep the fixes to
suppress the warning for 'make W=2'.
ath12k:
Properly handle scan requests on multi-radio wiphy devices.
Perform the usual set of bug fixes and cleanups.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
