For supporting dynamic MSI-X vector allocation by PCI controllers, enabling
the flag MSI_FLAG_PCI_MSIX_ALLOC_DYN is not enough, msix_prepare_msi_desc()
to prepare the MSI descriptor is also needed.
Export pci_msix_prepare_desc() to allow PCI controllers to support dynamic
MSI-X vector allocation.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250612-apple-kconfig-defconfig-v1-9-0e6f9cb512c1@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Sophgo CV18XX/SG200X use DW AXI CORE with a multiplexer for remapping
its request lines. The multiplexer supports at most 8 request lines.
Add driver for Sophgo CV18XX/SG200X DMA multiplexer.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250611081000.1187374-3-inochiama@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DMA IP of Sophgo CV18XX/SG200X is based on a DW AXI CORE, with
an additional channel remap register located in the top system control
area. The DMA channel is exclusive to each core.
In addition, the DMA multiplexer is a subdevice of system controller,
so this binding only contains necessary properties for the multiplexer
itself.
Add the dmamux binding for CV18XX/SG200X series SoC.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250611081000.1187374-2-inochiama@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The device bo is allocated from the device heap memory. (a trunk of
memory dedicated to device)
Rename amdxdna_gem_insert_node_locked to amdxdna_gem_heap_alloc
and move related sanity checks into it.
Add amdxdna_gem_dev_obj_free and move device bo free code into it.
Calculate the kernel virtual address of device bo by the device
heap memory address and offset.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250616091418.2605476-1-lizhi.hou@amd.com
The SBI specification clearly states that SBI HFENCE calls should
return SBI_ERR_NOT_SUPPORTED when one of the target hart doesn’t
support hypervisor extension (aka nested virtualization in-case
of KVM RISC-V).
Fixes: c7fa3c48de ("RISC-V: KVM: Treat SBI HFENCE calls as NOPs")
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20250605061458.196003-3-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
As-per the SBI specification, an SBI remote fence operation applies
to the entire address space if either:
1) start_addr and size are both 0
2) size is equal to 2^XLEN-1
>From the above, only #1 is checked by SBI SFENCE calls so fix the
size parameter check in SBI SFENCE calls to cover #2 as well.
Fixes: 13acfec2db ("RISC-V: KVM: Add remote HFENCE functions based on VCPU requests")
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20250605061458.196003-2-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Rather than relying/assuming that the tools generating the firmware
places the program headers immediately following the ELF header, use
e_phoff as intended to find the program headers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250610-mdt-loader-validation-and-fixes-v2-3-f7073e9ab899@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The function checks if a program header refers to a PT_LOAD segment,
that isn't a hash segment (which should be PT_LOAD in the first place),
andwith non-zero size. That's not the definition of "valid", but rather
if it's "loadable".
Rename the function to reflect what it does.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250610-mdt-loader-validation-and-fixes-v2-2-f7073e9ab899@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When the MDT loader is used in remoteproc, the ELF header is sanitized
beforehand, but that's not necessary the case for other clients.
Validate the size of the firmware buffer to ensure that we don't read
past the end as we iterate over the header. e_phentsize and e_shentsize
are validated as well, to ensure that the assumptions about step size in
the traversal are valid.
Fixes: 2aad40d911 ("remoteproc: Move qcom_mdt_loader into drivers/soc/qcom")
Cc: stable@vger.kernel.org
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250610-mdt-loader-validation-and-fixes-v2-1-f7073e9ab899@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Uniquely, this driver supports only the SET operation. It does not
support GET at all. The SET callback also always returns 0, even
tho it checks a bunch of conditions, and if my quick reading is
right, expects the user to insert filtering rules for given flow
type first? Long story short it seems too convoluted to easily
add the GET as part of the conversion.
Link: https://patch.msgid.link/20250613172751.3754732-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit says:
====================
net: phy: remove phy_driver_is_genphy and phy_driver_is_genphy_10g
Replace phy_driver_is_genphy() and phy_driver_is_genphy_10g()
with a new flag in struct phy_device.
====================
Link: https://patch.msgid.link/5778e86e-dd54-4388-b824-6132729ad481@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove now unused function phy_driver_is_genphy_10g().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/49b0589a-9604-4ee9-add5-28fbbbe2c2f3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use new flag phydev->is_genphy_driven to simplify this function.
Note that this includes a minor functional change:
Now this function returns true if ANY of the genphy drivers
is bound to the PHY device.
We have only one user in DSA driver mt7530, and there the
functional change doesn't matter.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/c9ac3a7d-262a-425d-9153-97fe3ca6280a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to get rid of phy_driver_is_genphy() and
phy_driver_is_genphy_10g(), as first step add and use a flag
phydev->is_genphy_driven.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/3f3ad6dc-402e-4915-8d5a-2306b6d5562b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
eth: intel: migrate to new RXFH callbacks
Migrate Intel drivers to the recently added dedicated .get_rxfh_fields
and .set_rxfh_fields ethtool callbacks.
Note that I'm deleting all the boilerplate kdoc from the affected
functions in the more recent drivers. If the maintainers feel strongly
I can respin and add it back, but it really feels useless and undue
burden for refactoring. No other vendor does this.
v1: https://lore.kernel.org/20250613010111.3548291-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250614180907.4167714-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
I'm deleting all the boilerplate kdoc from the affected functions.
It is somewhere between pointless and incorrect, just a burden for
people refactoring the code.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250614180907.4167714-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
I'm deleting all the boilerplate kdoc from the affected functions.
It is somewhere between pointless and incorrect, just a burden for
people refactoring the code.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250614180907.4167714-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
I'm deleting all the boilerplate kdoc from the affected functions.
It is somewhere between pointless and incorrect, just a burden for
people refactoring the code.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250614180907.4167714-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
.get callback moves out of the switch and set_rxnfc disappears
as ETHTOOL_SRXFH as the only functionality.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250614180907.4167714-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250614180907.4167714-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250614180907.4167714-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250614180907.4167714-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
This driver's RXFH config is read only / fixed so the conversion
is trivial.
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250614180638.4166766-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
This driver's RXFH config is read only / fixed and it's the only
get_rxnfc sub-command the driver supports. So convert the get_rxnfc
handler into a get_rxfh_fields handler.
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250614180638.4166766-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
This driver's RXFH config is read only / fixed so the conversion
is purely factoring out the handling into a helper.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250614180638.4166766-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
This driver's RXFH config is read only / fixed so the conversion
is purely factoring out the handling into a helper.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250614180638.4166766-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
This driver's RXFH config is read only / fixed so the conversion
is trivial.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250614180638.4166766-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Subbaraya Sundeep says:
====================
CN20K silicon with mbox support
CN20K is the next generation silicon in the Octeon series with various
improvements and new features.
Along with other changes the mailbox communication mechanism between RVU
(Resource virtualization Unit) SRIOV PFs/VFs with Admin function (AF) has
also gone through some changes.
Some of those changes are
- Separate IRQs for mbox request and response/ack.
- Configurable mbox size, default being 64KB.
- Ability for VFs to communicate with RVU AF instead of going through
parent SRIOV PF.
Due to more memory requirement due to configurable mbox size, mbox memory
will now have to be allocated by
- AF (PF0) for communicating with other PFs and all VFs in the system.
- PF for communicating with it's child VFs.
On previous silicons mbox memory was reserved and configured by firmware.
This patch series add basic mbox support for AF (PF0) <=> PFs and
PF <=> VFs. AF <=> VFs communication and variable mbox size support will
come in later.
Patch #1 Supported co-existance of bit encoding PFs and VFs in 16-bit
hardware pcifunc format between CN20K silicon and older octeon
series. Also exported PF,VF masks and shifts present in mailbox
module to all other modules.
Patch #2 Added basic mbox operation APIs and structures to support both
CN20K and previous version of silicons.
Patch #3 This patch adds support for basic mbox infrastructure
implementation for CN20K silicon in AF perspective. There are
few updates w.r.t MBOX ACK interrupt and offsets in CN20k.
Patch #4 Added mbox implementation between NIC PF and AF for CN20K.
Patch #5 Added mbox communication support between AF and AF's VFs.
Patch #6 This patch adds support for MBOX communication between NIC PF and
its VFs.
====================
Link: https://patch.msgid.link/1749639716-13868-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch implements the CN20k MBOX communication between PF and
it's VFs. CN20K silicon got extra interrupt of MBOX response for trigger
interrupt. Also few of the CSR offsets got changed in CN20K against
prior series of silicons.
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1749639716-13868-7-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch implements the CN20k MBOX communication between AF and
AF's VFs. This implementation uses separate trigger interrupts
for request, response messages against using trigger message data in CN10K.
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1749639716-13868-6-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This implementation uses separate trigger interrupts for request,
response messages against using trigger message data in CN10K.
This patch adds support for basic mbox implementation for CN20K
from NIC PF side.
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1749639716-13868-5-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This implementation uses separate trigger interrupts for request,
response MBOX messages against using trigger message data in CN10K.
This patch adds support for basic mbox implementation for CN20K
from AF side.
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1749639716-13868-4-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds basic mbox operation APIs and structures to add support
for mbox module on CN20k silicon. There are few CSR offsets, interrupts
changed between CN20k and prior Octeon series of devices.
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1749639716-13868-3-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Number of RVU PFs on CN20K silicon have increased to 96 from maximum
of 32 that were supported on earlier silicons. Every RVU PF and VF is
identified by HW using a 16bit PF_FUNC value. Due to the change in
Max number of PFs in CN20K, the bit encoding of this PF_FUNC has changed.
This patch handles the change by using helper functions(using silicon
check) to use PF,VF masks and shifts to support both new silicon CN20K,
OcteonTx series. These helper functions are used in different modules.
Also moved the NIX AF register offset macros to other files which
will be posted in coming patches.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/1749639716-13868-2-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can only pass negative error codes to bch2_err_str(); if it's a
positive integer it's not an error and we trip an assert.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-gpu-v1-1-ac0a21e74b71@linaro.org
The auxiliary device creation of this driver is simple enough to
use the available auxiliary device creation helper.
Use it and remove some boilerplate code.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250218-aux-device-create-helper-v4-3-c3d7dfdea2e6@baylibre.com
Commit 704d3d60fe ("drm/etnaviv: don't block scheduler when GPU is still
active") ensured that active jobs are returned to the pending list when
extending the timeout. However, it didn't use the pending list's lock to
manipulate the list, which causes a race condition as the scheduler's
workqueues are running.
Hold the lock while manipulating the scheduler's pending list to prevent
a race.
Cc: stable@vger.kernel.org
Fixes: 704d3d60fe ("drm/etnaviv: don't block scheduler when GPU is still active")
Reported-by: Philipp Stanner <phasta@kernel.org>
Closes: https://lore.kernel.org/dri-devel/964e59ba1539083ef29b06d3c78f5e2e9b138ab8.camel@mailbox.org/
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250602132240.93314-1-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
A path exists in a particular snapshot: we should do the pathwalk in the
snapshot ID of the inode we started from, _not_ change snapshot ID as we
walk inodes and dirents.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When we find a directory connectivity problem, we should do the repair
in the oldest snapshot that has the issue - so that we don't end up
duplicating work or making a real mess of things.
Oldest snapshot IDs have the highest integer value, so - just walk
inodes in reverse order.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch_subvolume.fs_path_parent needs to be updated as well, it should
match inode.bi_parent_subvol.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The bch2_subvolume_get_snapshot() call needs to happen before the dirent
lookup - the dirent is in the parent subvolume.
Also, check for loops.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
