Add enum dpll_feature_state for control over features.
Add dpll device level attribute:
DPLL_A_PHASE_OFFSET_MONITOR - to allow control over a phase offset monitor
feature. Attribute is present and shall return current state of a feature
(enum dpll_feature_state), if the device driver provides such capability,
otherwie attribute shall not be present.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250612152835.1703397-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve the .set_clk_tx_rate() method error message to include the
PHY interface mode along with the speed, which will be helpful to
the RK implementations.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1uPjjx-0049r5-NN@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve the rgmii_clock() documentation to indicate that it can also
be used for MII, GMII and RMII modes as well as RGMII as the required
clock rates are identical, but note that it won't error out for 1G
speeds for MII and RMII.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uPjjk-0049pI-MD@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The field is spelled "message_priprity" in the big-endian bit-field
definition. Nothing in-tree currently references the member, so the
typo does not break kernel builds, but it is clearly incorrect.
Signed-off-by: RubenKelevra <rubenkelevra@gmail.com>
Link: https://patch.msgid.link/20250612145012.185321-1-rubenkelevra@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel says:
====================
dp83tg720: Reduce link recovery
This patch series improves the link recovery behavior of the TI
DP83TG720 PHY driver.
Previously, we introduced randomized reset delay logic to avoid reset
collisions in multi-PHY setups. While this approach was functional, it
had notable drawbacks: unpredictable behavior, longer and more variable
link recovery times, and overall higher complexity in link handling.
With this new approach, we replace the randomized delay with
deterministic, role-specific delays in the PHY reset logic. This enables
us to:
- Remove the redundant empirical 600 ms delay in read_status()
- Drop the random polling interval logic
- Introduce a clean, adaptive polling strategy with consistent
behavior and improved responsiveness
As a result, the PHY is now able to recover link reliably in under
1000_ms
====================
Link: https://patch.msgid.link/20250612104157.2262058-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the PHY reset logic includes a role-specific asymmetric delay
to avoid synchronized reset deadlocks, the previously used randomized
polling intervals are no longer necessary.
This patch removes the get_random_u32_below()-based logic and introduces
an adaptive polling strategy:
- Fast polling for a short time after link-down
- Slow polling if the link remains down
- Slower polling when the link is up
This balances CPU usage and responsiveness while avoiding reset
collisions. Additionally, the driver still relies on polling for
all link state changes, as interrupt support is not implemented,
and link-up events are not reliably signaled by the PHY.
The polling parameters are now documented in the updated top-of-file
comment.
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250612104157.2262058-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that dp83tg720_soft_reset() introduces role-specific delays to avoid
reset synchronization deadlocks, the fixed 600ms post-reset delay in
dp83tg720_read_status() is no longer needed.
The new logic provides both the required MDC timing and link stabilization,
making the old empirical delay redundant and unnecessarily long.
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250612104157.2262058-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a .soft_reset callback for the DP83TG720 PHY that issues a hardware
reset followed by an asymmetric post-reset delay. The delay differs
based on the PHY's master/slave role to avoid synchronized reset
deadlocks, which are known to occur when both link partners use
identical reset intervals.
The delay includes:
- a fixed 1ms wait to satisfy MDC access timing per datasheet, and
- an empirically chosen extra delay (97ms for master, 149ms for slave).
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250612104157.2262058-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simplify the scheduler by making formerly SMP-only primitives and data
structures unconditional.
tj: Updated subject for clarity.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Simplify the scheduler by making formerly SMP-only primitives and data
structures unconditional.
tj: Updated subject for clarity. Fixed stray #else block which wasn't
removed causing build failure.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Simplify the scheduler by making formerly SMP-only primitives and data
structures unconditional.
tj: Updated subject for clarity. Replace #if defined() with #ifdef.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Simplify the scheduler by making formerly SMP-only primitives and data
structures unconditional.
tj: Updated subject for clarity.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The source and destination of some strcpy operations was the same.
Split out the part of the operations that needed to be done for those
particular calls so the unnecessary copy wasn't done.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506140756.EFXXvIP4-lkp@intel.com/
Signed-off-by: Corey Minyard <corey@minyard.net>
All fixes for drivers. The core change in the error handler is simply
to translate an ALUA specific sense code into a retry the ALUA
components can handle and won't impact any other devices.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCaEyPIiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishVXlAPoCGJTL
EhMVta96mQGEBK2YfgBQGh87cMSNi7u3f04xawEA84UrOhakLtsVYp9Rua7k0VzL
blmQtDCoujlsPAasaQg=
=0N8r
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All fixes for drivers.
The core change in the error handler is simply to translate an ALUA
specific sense code into a retry the ALUA components can handle and
won't impact any other devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: error: alua: I/O errors for ALUA state transitions
scsi: storvsc: Increase the timeouts to storvsc_timeout
scsi: s390: zfcp: Ensure synchronous unit_add
scsi: iscsi: Fix incorrect error path labels for flashnode operations
scsi: mvsas: Fix typos in per-phy comments and SAS cmd port registers
scsi: core: ufs: Fix a hang in the error handler
Heiner Kallweit says:
====================
net: phy: improve mdio-boardinfo handling
This series includes smaller improvements to mdio-boardinfo handling.
====================
Link: https://patch.msgid.link/6ae7bda0-c093-468a-8ac0-50a2afa73c45@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using a direct assignment instead of memcpy reduces the text segment
size from 0x273 bytes to 0x19b bytes in my case.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/af371f2a-42f3-4d94-80b9-3420380a3f6f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's no need to include phy.h and mutex.h in mdio-boardinfo.h.
However mdio-boardinfo.c included phy.h indirectly this way so far,
include it explicitly instead. Whilst at it, sort the included
headers properly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/86b7a1d6-9f9c-4d22-b3d8-5abdef0bb39a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Struct mdio_board_entry isn't used outside mdio-boardinfo.c, so remove
the definition from the header file.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/0afe52d0-6fe6-434a-9881-3979661ff7b0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Move declaration of variable bi into list_for_each_entry_safe()
- The return value of cb() effectively isn't used, this allows to simplify
the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/f6bbe242-b43d-4c2b-8c51-2cb2cefbaf59@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vc4:
- Fix infinite EPROBE_DEFER loop in vc4 probing.
amdxdna:
- Fix amdxdna firmware size.
meson:
- modesetting fixes
sitronix:
- Kconfig fix for st7171-i2c.
dma-buf:
- Fix -EBUSY WARN_ON_ONCE in dma-buf
udmabuf:
- Use dma_sync_sgtable_for_cpu in udmabuf.
xe:
- Fix regression disallowing 64K SVM migration
- Use a bounce buffer for WA BB
-----BEGIN PGP SIGNATURE-----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=VNUR
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-06-14' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Quiet week, only two pull requests came my way, xe has a couple of
fixes and then a bunch of fixes across the board, vc4 probably fixes
the biggest problem:
vc4:
- Fix infinite EPROBE_DEFER loop in vc4 probing
amdxdna:
- Fix amdxdna firmware size
meson:
- modesetting fixes
sitronix:
- Kconfig fix for st7171-i2c
dma-buf:
- Fix -EBUSY WARN_ON_ONCE in dma-buf
udmabuf:
- Use dma_sync_sgtable_for_cpu in udmabuf
xe:
- Fix regression disallowing 64K SVM migration
- Use a bounce buffer for WA BB"
* tag 'drm-fixes-2025-06-14' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/lrc: Use a temporary buffer for WA BB
udmabuf: use sgtable-based scatterlist wrappers
dma-buf: fix compare in WARN_ON_ONCE
drm/sitronix: st7571-i2c: Select VIDEOMODE_HELPERS
drm/meson: fix more rounding issues with 59.94Hz modes
drm/meson: use vclk_freq instead of pixel_freq in debug print
drm/meson: fix debug log statement when setting the HDMI clocks
drm/vc4: fix infinite EPROBE_DEFER loop
drm/xe/svm: Fix regression disallowing 64K SVM migration
accel/amdxdna: Fix incorrect PSP firmware size
This patch removes duplicated code.
Eduard points out [1]:
Same cleanup cycles are done in push_stack() and push_async_cb(),
both functions are only reachable from do_check_common() via
do_check() -> do_check_insn().
Hence, I think that cur state should not be freed in push_*()
functions and pop_stack() loop there is not needed.
This would also fix the 'symptom' for [2], but the issue also has a
simpler fix which was sent separately. This fix also makes sure the
push_*() callers always return an error for which
error_recoverable_with_nospec(err) is false. This is required because
otherwise we try to recover and access the stale `state`.
Moving free_verifier_state() and pop_stack(..., pop_log=false) to happen
after the bpf_vlog_reset() call in do_check_common() is fine because the
pop_stack() call that is moved does not call bpf_vlog_reset() with the
pop_log=false parameter.
[1] https://lore.kernel.org/all/b6931bd0dd72327c55287862f821ca6c4c3eb69a.camel@gmail.com/
[2] https://lore.kernel.org/all/68497853.050a0220.33aa0e.036a.GAE@google.com/
Reported-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/all/b6931bd0dd72327c55287862f821ca6c4c3eb69a.camel@gmail.com/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Link: https://lore.kernel.org/r/20250613090157.568349-2-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We can't expose direct access to the internal Revocable, since this
allows users to directly revoke the internal Revocable without Devres
having the chance to synchronize with the devres callback -- we have to
guarantee that the internal Revocable has been fully revoked before
the device is fully unbound.
Hence, remove the corresponding Deref implementation and, instead,
provide indirect accessors for the internal Revocable.
Note that we can still support Devres::revoke() by implementing the
required synchronization (which would be almost identical to the
synchronization in Devres::drop()).
Fixes: 76c01ded72 ("rust: add devres abstraction")
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250611174827.380555-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
In Devres::drop() we first remove the devres action and then drop the
wrapped device resource.
The design goal is to give the owner of a Devres object control over when
the device resource is dropped, but limit the overall scope to the
corresponding device being bound to a driver.
However, there's a race that was introduced with commit 8ff656643d
("rust: devres: remove action in `Devres::drop`"), but also has been
(partially) present from the initial version on.
In Devres::drop(), the devres action is removed successfully and
subsequently the destructor of the wrapped device resource runs.
However, there is no guarantee that the destructor of the wrapped device
resource completes before the driver core is done unbinding the
corresponding device.
If in Devres::drop(), the devres action can't be removed, it means that
the devres callback has been executed already, or is still running
concurrently. In case of the latter, either Devres::drop() wins revoking
the Revocable or the devres callback wins revoking the Revocable. If
Devres::drop() wins, we (again) have no guarantee that the destructor of
the wrapped device resource completes before the driver core is done
unbinding the corresponding device.
CPU0 CPU1
------------------------------------------------------------------------
Devres::drop() { Devres::devres_callback() {
self.data.revoke() { this.data.revoke() {
is_available.swap() == true
is_available.swap == false
}
}
// [...]
// device fully unbound
drop_in_place() {
// release device resource
}
}
}
Depending on the specific device resource, this can potentially lead to
user-after-free bugs.
In order to fix this, implement the following logic.
In the devres callback, we're always good when we get to revoke the
device resource ourselves, i.e. Revocable::revoke() returns true.
If Revocable::revoke() returns false, it means that Devres::drop(),
concurrently, already drops the device resource and we have to wait for
Devres::drop() to signal that it finished dropping the device resource.
Note that if we hit the case where we need to wait for the completion of
Devres::drop() in the devres callback, it means that we're actually
racing with a concurrent Devres::drop() call, which already started
revoking the device resource for us. This is rather unlikely and means
that the concurrent Devres::drop() already started doing our work and we
just need to wait for it to complete it for us. Hence, there should not
be any additional overhead from that.
(Actually, for now it's even better if Devres::drop() does the work for
us, since it can bypass the synchronize_rcu() call implied by
Revocable::revoke(), but this goes away anyways once I get to implement
the split devres callback approach, which allows us to first flip the
atomics of all registered Devres objects of a certain device, execute a
single synchronize_rcu() and then drop all revocable objects.)
In Devres::drop() we try to revoke the device resource. If that is *not*
successful, it means that the devres callback already did and we're good.
Otherwise, we try to remove the devres action, which, if successful,
means that we're good, since the device resource has just been revoked
by us *before* we removed the devres action successfully.
If the devres action could not be removed, it means that the devres
callback must be running concurrently, hence we signal that the device
resource has been revoked by us, using the completion.
This makes it safe to drop a Devres object from any task and at any point
of time, which is one of the design goals.
Fixes: 76c01ded72 ("rust: add devres abstraction")
Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://lore.kernel.org/lkml/aD64YNuqbPPZHAa5@google.com/
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250612121817.1621-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Return a boolean from Revocable::revoke() and Revocable::revoke_nosync()
to indicate whether the data has been revoked already.
Return true if the data hasn't been revoked yet (i.e. this call revoked
the data), false otherwise.
This is required by Devres in order to synchronize the completion of the
revoke process.
Reviewed-by: Benno Lossin <lossin@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250612121817.1621-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement a minimal abstraction for the completion synchronization
primitive.
This initial abstraction only adds complete_all() and
wait_for_completion(), since that is what is required for the subsequent
Devres patch.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250612121817.1621-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
In preparation for needing to shift NVMe passthrough to always use
task_work for polled IO completions, ensure that those are suitably
run at exit time. See commit:
9ce6c9875f ("nvme: always punt polled uring_cmd end_io work to task_work")
for details on why that is necessary.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently NVMe uring_cmd completions will complete locally, if they are
polled. This is done because those completions are always invoked from
task context. And while that is true, there's no guarantee that it's
invoked under the right ring context, or even task. If someone does
NVMe passthrough via multiple threads and with a limited number of
poll queues, then ringA may find completions from ringB. For that case,
completing the request may not be sound.
Always just punt the passthrough completions via task_work, which will
redirect the completion, if needed.
Cc: stable@vger.kernel.org
Fixes: 585079b6e4 ("nvme: wire up async polling for io passthrough commands")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Update the faux device handling code in the driver core and address
an ACPI APEI error injection driver failure that started to occur
after switching it over to using a faux device on top of that (Dan
Williams).
- Update data types of variables passed as arguments to
mwait_idle_with_hints() in the ACPI PAD (processor aggregator device)
driver to match the function definition after recent changes (Uros
Bizjak).
- Fix a NULL pointer dereference in the ACPI CPPC library that occurs
when nosmp is passed to the kernel in the command line (Yunhui Cui).
- Ignore ECDT tables with an invalid ID string to prevent using an
incorrect GPE for signaling events on some systems (Armin Wolf).
- Add a new IRQ override quirk for MACHENIKE 16P (Wentao Guan).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmhMhWMSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO11QwIAJauSuEZ6CMSB+ntXZ0WO+Sx62EKn1/w
sC8auAtfmp7H31m1YjqJllt/n2tadJO2ZMAzMuHeVp+1LIxHnNPR6e97+8z+Xj3m
224NUki1kG7EyEYEwtZnHVOQBue1nKxNZqQ4NHuuwIXIj2dE4GgsCEqT+vrZVmI+
JLZWo8pMH2puAakdBkPtsdqWzTNq7lOAsigkoDvbO4Azz2GCPilgrgzOeqdOlFw8
URwM7qhk6Wd77Zr9kyzQIRBt8LVwKIF6i13eR4CXCNzp+5O0qYlci1dBYErL/oWU
u2D5ebQMCCKqBnNHowBr9ChM4QwmHB9YdTnx574z7kUKCjrgQOrC7hQ=
=Jx0s
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI APEI error injection driver failure that started to
occur after switching it over to using a faux device, address an EC
driver issue related to invalid ECDT tables, clean up the usage of
mwait_idle_with_hints() in the ACPI PAD driver, add a new IRQ override
quirk, and fix a NULL pointer dereference related to nosmp:
- Update the faux device handling code in the driver core and address
an ACPI APEI error injection driver failure that started to occur
after switching it over to using a faux device on top of that (Dan
Williams)
- Update data types of variables passed as arguments to
mwait_idle_with_hints() in the ACPI PAD (processor aggregator
device) driver to match the function definition after recent
changes (Uros Bizjak)
- Fix a NULL pointer dereference in the ACPI CPPC library that occurs
when nosmp is passed to the kernel in the command line (Yunhui Cui)
- Ignore ECDT tables with an invalid ID string to prevent using an
incorrect GPE for signaling events on some systems (Armin Wolf)
- Add a new IRQ override quirk for MACHENIKE 16P (Wentao Guan)"
* tag 'acpi-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Use IRQ override on MACHENIKE 16P
ACPI: EC: Ignore ECDT tables with an invalid ID string
ACPI: CPPC: Fix NULL pointer dereference when nosmp is used
ACPI: PAD: Update arguments of mwait_idle_with_hints()
ACPI: APEI: EINJ: Do not fail einj_init() on faux_device_create() failure
driver core: faux: Quiet probe failures
driver core: faux: Suppress bind attributes
- Implement CpuId Rust abstraction and use it to fix doctest failure
related to the recently introduced cpumask abstraction (Viresh Kumar).
- Do minor cleanups in the `# Safety` sections for cpufreq abstractions
added recently (Viresh Kumar).
- Unbreak cpupower systemd service units installation on some systems
by adding a unitdir variable for specifying the location to install
them (Francesco Poli).
- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
elimination during the 6.16 merge window due to a problem with
handling "dead" SMT siblings, but this time prevent leaving them in
C1 after initialization by taking them online and back offline when
a proper cpuidle driver for the platform has been registered (Rafael
Wysocki).
- Update data types of variables passed as arguments to
mwait_idle_with_hints() to match the function definition
after recent changes (Uros Bizjak).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmhMgawSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1dA0H/j7V4sfA383pZfWwegRC4MQeiW4EVdIx
2G6d33Gsfv+zEzTSsPvtKghR4eUIldTdco04bqusMcI+qIfgdWIEBpi2tQhJU2Tt
Bgc24Kya0n85KKNLHs60xm0WXhkAyu3TFad+4yTGXRZEmAD+O6lyUPjum+mn+gbx
HuLE6KE9D/qzzYOU03kjCsJExBf7vv0bBNIqGqNyuFLYOaoqZd5rLhNhhxm2AkYi
hZ5wmYBY+2SJRzwryNNHQKKmZ1jk9HGapnIVrxQ2Pjc0AhX+tRW7FI5lDDvUWtW+
RN/226Y3OQ3JHXAj4S0K64t0ZEpiEKS2oPatjGzosNmdyI0f+CRACQs=
=OcND
-----END PGP SIGNATURE-----
Merge tag 'pm-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the cpupower utility installation, fix up the recently added
Rust abstractions for cpufreq and OPP, restore the x86 update
eliminating mwait_play_dead_cpuid_hint() that has been reverted during
the 6.16 merge window along with preventing the failure caused by it
from happening, and clean up mwait_idle_with_hints() usage in
intel_idle:
- Implement CpuId Rust abstraction and use it to fix doctest failure
related to the recently introduced cpumask abstraction (Viresh
Kumar)
- Do minor cleanups in the `# Safety` sections for cpufreq
abstractions added recently (Viresh Kumar)
- Unbreak cpupower systemd service units installation on some systems
by adding a unitdir variable for specifying the location to install
them (Francesco Poli)
- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
elimination during the 6.16 merge window due to a problem with
handling "dead" SMT siblings, but this time prevent leaving them in
C1 after initialization by taking them online and back offline when
a proper cpuidle driver for the platform has been registered
(Rafael Wysocki)
- Update data types of variables passed as arguments to
mwait_idle_with_hints() to match the function definition after
recent changes (Uros Bizjak)"
* tag 'pm-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
rust: cpu: Add CpuId::current() to retrieve current CPU ID
rust: Use CpuId in place of raw CPU numbers
rust: cpu: Introduce CpuId abstraction
intel_idle: Update arguments of mwait_idle_with_hints()
cpufreq: Convert `/// SAFETY` lines to `# Safety` sections
cpupower: split unitdir from libdir in Makefile
Reapply "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
ACPI: processor: Rescan "dead" SMT siblings during initialization
intel_idle: Rescan "dead" SMT siblings during initialization
x86/smp: PM/hibernate: Split arch_resume_nosmt()
intel_idle: Use subsys_initcall_sync() for initialization
Merge assorted ACPI updates for 6.16-rc2:
- Update data types of variables passed as arguments to
mwait_idle_with_hints() in the ACPI PAD (processor aggregator device)
driver to match the function definition after recent changes (Uros
Bizjak).
- Fix a NULL pointer dereference in the ACPI CPPC library that occurs
when nosmp is passed to the kernel in the command line (Yunhui Cui).
- Ignore ECDT tables with an invalid ID string to prevent using an
incorrect GPE for signaling events on some systems (Armin Wolf).
- Add a new IRQ override quirk for MACHENIKE 16P (Wentao Guan).
* acpi-pad:
ACPI: PAD: Update arguments of mwait_idle_with_hints()
* acpi-cppc:
ACPI: CPPC: Fix NULL pointer dereference when nosmp is used
* acpi-ec:
ACPI: EC: Ignore ECDT tables with an invalid ID string
* acpi-resource:
ACPI: resource: Use IRQ override on MACHENIKE 16P
4d4c10f763 ("PCI: Explicitly put devices into D0 when initializing")
intended to put PCI devices into D0, but in doing so unintentionally
changed runtime PM initialization not to occur on devices that don't
support PCI PM. This caused a regression in vfio-pci due to an imbalance
with its use.
Adjust the logic in pci_pm_init() so that even if PCI PM isn't supported
runtime PM is still initialized.
Fixes: 4d4c10f763 ("PCI: Explicitly put devices into D0 when initializing")
Reported-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Closes: https://lore.kernel.org/linux-pci/20250424043232.1848107-1-superm1@kernel.org/T/#m7e8929d6421690dc8bd6dc639d86c2b4db27cbc4
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Closes: https://lore.kernel.org/linux-pci/20250424043232.1848107-1-superm1@kernel.org/T/#m40d277dcdb9be64a1609a82412d1aa906263e201
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Link: https://patch.msgid.link/20250611233117.61810-1-superm1@kernel.org
Merge cpuidle updates for 6.16-rc2:
- Update data types of variables passed as arguments to
mwait_idle_with_hints() to match the function definition
after recent changes (Uros Bizjak).
- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
elimination during the merge window due to a problem with handling
"dead" SMT siblings, but this time prevent leaving them in C1 after
initialization by taking them online and back offline when a proper
cpuidle driver for the platform has been registered (Rafael Wysocki).
* pm-cpuidle:
intel_idle: Update arguments of mwait_idle_with_hints()
Reapply "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
ACPI: processor: Rescan "dead" SMT siblings during initialization
intel_idle: Rescan "dead" SMT siblings during initialization
x86/smp: PM/hibernate: Split arch_resume_nosmt()
intel_idle: Use subsys_initcall_sync() for initialization
Merge a cpupower utility fix for 6.16-rc2 that unbreaks systemd service
units installation on some sysems (Francesco Poli).
* pm-tools:
cpupower: split unitdir from libdir in Makefile
A test case to check if both branches of jset are explored when
computing program CFG.
At 'if r1 & 0x7 ...':
- register 'r2' is computed alive only if jump branch of jset
instruction is followed;
- register 'r0' is computed alive only if fallthrough branch of jset
instruction is followed.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250613175331.3238739-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_JSET is a conditional jump and currently verifier.c:can_jump()
does not know about that. This can lead to incorrect live registers
and SCC computation.
E.g. in the following example:
1: r0 = 1;
2: r2 = 2;
3: if r1 & 0x7 goto +1;
4: exit;
5: r0 = r2;
6: exit;
W/o this fix insn_successors(3) will return only (4), a jump to (5)
would be missed and r2 won't be marked as alive at (3).
Fixes: 14c8552db6 ("bpf: simple DFA-based live registers analysis")
Reported-by: syzbot+a36aac327960ff474804@syzkaller.appspotmail.com
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250613175331.3238739-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A collection of driver specific fixes, most minor apart from the OMAP
ones which disable some recent performance optimisations in some
non-standard cases where we could start driving the bus incorrectly.
The change to the stm32-ospi driver to use the newer reset APIs is a fix
for interactions with other IP sharing the same reset line in some SoCs.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmhMXiEACgkQJNaLcl1U
h9DfLwf9F7yAsLh7eGYPCqjDB365LaAuroOWuM5hB74cTFis9WJpcEI1pk9GdaD0
m7TAkc+cxo0KBvpe0/t0+oqSBkUdcZ4ASXZp4zYnsj9dGhBcmlS0szHIOZWknMxZ
E2pzHWj6p4/+zntWa+CCiiVGHz0PV3I9Oq3V1kI1EqyAZXc9uf5hj0hITVulJ4ih
8+Y+927MpJ2dis8CaHeubDfNxnwJlCLS5GFwZaEhTXWp6IttxjH5KmeZu2Wtahdw
ZcqUDLPYxdzoirDoGvdGBTHc0NMF843WD9wFWb29BzuyPLZYGAwGXDhGtHqSaGAo
6HB5529nuKDAC1XNyRN6NA4bQosMaw==
=ShaP
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A collection of driver specific fixes, most minor apart from the OMAP
ones which disable some recent performance optimisations in some
non-standard cases where we could start driving the bus incorrectly.
The change to the stm32-ospi driver to use the newer reset APIs is a
fix for interactions with other IP sharing the same reset line in some
SoCs"
* tag 'spi-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-pci1xxxx: Drop MSI-X usage as unsupported by DMA engine
spi: stm32-ospi: clean up on error in probe()
spi: stm32-ospi: Make usage of reset_control_acquire/release() API
spi: offload: check offload ops existence before disabling the trigger
spi: spi-pci1xxxx: Fix error code in probe
spi: loongson: Fix build warnings about export.h
spi: omap2-mcspi: Disable multi-mode when the previous message kept CS asserted
spi: omap2-mcspi: Disable multi mode when CS should be kept asserted after message
One minor fix for a leak in the DT parsing code in the max20086 driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmhMXpMACgkQJNaLcl1U
h9DxfAf/Sk4lxMl2JHbjk+TYXz5Q+Y04fpGYMCnV1u64kq9yxB2NKBjMomS6YysY
qsueW1caCJM/D/8MUqkU6mbQxGCt6V8eKWjVxcjfPOEM/lWCP+FfsMOdu9rXij1s
bhR4fI7jmaDYNjwaDCnyK7F0/TxUj5GiOPV3d+5C3gQ6VXFB+wTs1jzalvszP7WP
3doM/U8NZH7gg7zztvKW8l89d8OWCc7L83dW/ecrAAMX+jbi6JC8qT5VTbKkdSfs
Y1dPrTloRIj+z1n72YY6RLsqD8qO5P5KW2wy1qbnqFEZx82s0xFcAgcCkkeK3lnG
He8R+qqfZvjL1o+shdlCHthr+R82Bw==
=bJgB
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One minor fix for a leak in the DT parsing code in the max20086 driver"
* tag 'regulator-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max20086: Fix refcount leak in max20086_parse_regulators_dt()
If an exiting non-autoreaping task has already passed exit_notify() and
calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent
or debugger right after unlock_task_sighand().
If a concurrent posix_cpu_timer_del() runs at that moment, it won't be
able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or
lock_task_sighand() will fail.
Add the tsk->exit_state check into run_posix_cpu_timers() to fix this.
This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because
exit_task_work() is called before exit_notify(). But the check still
makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail
anyway in this case.
Cc: stable@vger.kernel.org
Reported-by: Benoît Sevens <bsevens@google.com>
Fixes: 0bdd2ed413 ("sched: run_posix_cpu_timers: Don't check ->exit_state, use lock_task_sighand()")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Do not free "head" variable in filter_free_subsystem_filters()
The first error path jumps to "free_now" label but first frees the newly
allocated "head" variable. But the "free_now" code checks this variable,
and if it is not NULL, it will iterate the list. As this list variable
was already initialized, the "free_now" code will not do anything as it
is empty. But freeing it will cause a UAF bug. The error path should
simply jump to the "free_now" label and leave the "head" variable alone.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaExH8RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qs+DAQDWBAAmviDcMb+e+9uZi8rR8+Aj+j5S
efPe/g4D2otl5QD/T7u5TZFrSOZfl4Gv9Z1ZWhKj+xfw3FiphODrzHdcsgo=
=eP9r
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
- Do not free "head" variable in filter_free_subsystem_filters()
The first error path jumps to "free_now" label but first frees the
newly allocated "head" variable. But the "free_now" code checks this
variable, and if it is not NULL, it will iterate the list. As this
list variable was already initialized, the "free_now" code will not
do anything as it is empty. But freeing it will cause a UAF bug.
The error path should simply jump to the "free_now" label and leave
the "head" variable alone.
* tag 'trace-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Do not free "head" on error path of filter_free_subsystem_filters()
Eduard Zingerman says:
====================
veristat: memory accounting for bpf programs
When working on the verifier, it is sometimes interesting to know how a
particular change affects memory consumption. This patch-set modifies
veristat to provide such information. As a collateral, kernel needs an
update to make allocations reachable from BPF program load accountable
in memcg statistics.
Here is a sample output:
Program Peak states Peak memory (MiB)
--------------- ----------- -----------------
lavd_select_cpu 2153 43
lavd_enqueue 1982 41
lavd_dispatch 3480 28
Technically, this is implemented by creating and entering a new cgroup
at the start of veristat execution. The difference between values from
cgroup "memory.peak" file before and after bpf_object__load() is used
as a metric.
To minimize measurements jitter data is collected in megabytes.
Changelog:
v2: https://lore.kernel.org/bpf/20250612130835.2478649-1-eddyz87@gmail.com/
v2 -> v3:
- bpf_verifier_state->jmp_history and
bpf_verifier_env->explored_states allocations are switched from
GFP_USER to GFP_KERNEL_ACCOUNT (Andrii, Alexei);
- veristat.c:STR macro removed, PATH_MAX-1 == 4095 is hard-coded in
scanf format strings (Andrii);
- env->{orig,stat}_cgroup size changed to PATH_MAX (Andrii);
- snprintf_trunc() is removed, flag -Wno-format-truncation
is added to CFLAGS for veristat.o when compiled with gcc;
v1: https://lore.kernel.org/bpf/20250605230609.1444980-1-eddyz87@gmail.com/
v1 -> v2:
- a single cgroup, created at the beginning of execution, is now used
for measurements (Andrii, Mykyta);
- cgroup namespace is not created, as it turned out to be useless
(Andrii);
- veristat no longer mounts cgroup fs or changes subtree_control,
instead it looks for an existing mount point and reports an error if
memory.peak file can't be opened (Andrii, Alexei);
- if 'mem_peak' statistics is not enabled, veristat skips cgroup
setup;
- code sharing with cgroup_helpers.c was considered but was decided
against to simplify veristat github sync.
====================
Link: https://patch.msgid.link/20250613072147.3938139-1-eddyz87@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This commit adds a new field mem_peak / "Peak memory (MiB)" field to a
set of gathered statistics. The field is intended as an estimate for
peak verifier memory consumption for processing of a given program.
Mechanically stat is collected as follows:
- At the beginning of handle_verif_mode() a new cgroup is created
and veristat process is moved into this cgroup.
- At each program load:
- bpf_object__load() is split into bpf_object__prepare() and
bpf_object__load() to avoid accounting for memory allocated for
maps;
- before bpf_object__load():
- a write to "memory.peak" file of the new cgroup is used to reset
cgroup statistics;
- updated value is read from "memory.peak" file and stashed;
- after bpf_object__load() "memory.peak" is read again and
difference between new and stashed values is used as a metric.
If any of the above steps fails veristat proceeds w/o collecting
mem_peak information for a program, reporting mem_peak as -1.
While memcg provides data in bytes (converted from pages), veristat
converts it to megabytes to avoid jitter when comparing results of
different executions.
The change has no measurable impact on veristat running time.
A correlation between "Peak states" and "Peak memory" fields provides
a sanity check for gathered statistics, e.g. a sample of data for
sched_ext programs:
Program Peak states Peak memory (MiB)
------------------------ ----------- -----------------
lavd_select_cpu 2153 44
lavd_enqueue 1982 41
lavd_dispatch 3480 28
layered_dispatch 1417 17
layered_enqueue 760 11
lavd_cpu_offline 349 6
lavd_cpu_online 349 6
lavd_init 394 6
rusty_init 350 5
layered_select_cpu 391 4
...
rusty_stopping 134 1
arena_topology_node_init 170 0
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250613072147.3938139-3-eddyz87@gmail.com
This commit adds __GFP_ACCOUNT flag to verifier induced memory
allocations. The intent is to account for all allocations reachable
from BPF_PROG_LOAD command, which is needed to track verifier memory
consumption in veristat. This includes allocations done in verifier.c,
and some allocations in btf.c, functions in log.c do not allocate.
There is also a utility function bpf_memcg_flags() which selectively
adds GFP_ACCOUNT flag depending on the `cgroup.memory=nobpf` option.
As far as I understand [1], the idea is to remove bpf_prog instances
and maps from memcg accounting as these objects do not strictly belong
to cgroup, hence it should not apply here.
(btf_parse_fields() is reachable from both program load and map
creation, but allocated record is not persistent as is freed as soon
as map_check_btf() exits).
[1] https://lore.kernel.org/all/20230210154734.4416-1-laoar.shao@gmail.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250613072147.3938139-2-eddyz87@gmail.com
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Change the firmware filename format on SoundWire systems to
directly tie it to the physical amp it applies to. This is mainly
to decouple it from the ALSA prefix strings to avoid complications
when the SoundWire machine driver starts creating dailinks based on
SDCA Disco info instead of hardcoded match tables. It also avoids
errors from having to rename firmware files from a hardware-address
to a ALSA-prefix naming for Linux publication. There are already
published firmware files for the L56 B0 silicon so that has a fallback
scheme for backward compatibility which has been separated into its
own patch on top of the main change.
We'd like to get this into 6.16 so that the L63 support starts "clean"
with this new naming and we don't have to support one kernel version
with L63 using the old naming. Unfortunately we didn't manage to get
these patches through internal review and testing before the merge
window opened.
The Kconfig option `CONFIG_DRM_VKMS_KUNIT_TESTS` does not exist. However,
the VKMS format tests use such an option for compilation, meaning that
they are not compiled at all.
Use the Kconfig option `CONFIG_DRM_VKMS_KUNIT_TEST` to compile all VKMS
KUnit tests.
Fixes: 3e897853de ("drm/vkms: Create KUnit tests for YUV conversions")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20250611205704.334527-1-mcanal@igalia.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
x86:
- Make KVM_PRE_FAULT_MEMORY stricter for TDX, allowing userspace to pass
only the "untouched" addresses and flipping the shared/private bit
in the implementation.
- Disable SEV-SNP support on initialization failure
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmhMVEQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNCYwgAoqYz+RTcIx6EwHD/kN/9maUcQVl1
MMmXqfF2jQYmTvk7ocEW1qwx/SV0kB+H9LOThV8SWTvVxDbNqAaUWRDz+wcz3zaO
6/sUwz4dtU4XaTgxYhhB82lsPtJHyM+FM+bNL4rFFnrA1tZ93wRsMEeryZ5h960V
C1Bc+PLBdpj+S3gQGvxeMxnG/n0oOAcecUqQa3ViIOKSfZEc/11+BjjvfvkYqExq
s206faKSqor8xVXUbgtOk3LZreIExj/mD+pwMiUBvG0H0g4wnaG7Arc41QCFMowF
4l4sQVMWFZiKQvQZSfdQOeNsXcepWw0qISK7UeoWpLnpM78uUfCS6iG1rA==
=Hc3G
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
x86:
- Make KVM_PRE_FAULT_MEMORY stricter for TDX, allowing userspace to
pass only the "untouched" addresses and flipping the shared/private
bit in the implementation.
- Disable SEV-SNP support on initialization failure
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Reject direct bits in gpa passed to KVM_PRE_FAULT_MEMORY
KVM: x86/mmu: Embed direct bits into gpa for KVM_PRE_FAULT_MEMORY
KVM: SEV: Disable SEV-SNP support on initialization failure
KVM: arm64: selftests: Determine effective counter width in arch_timer_edge_cases
KVM: arm64: selftests: Fix xVAL init in arch_timer_edge_cases
KVM: arm64: selftests: Fix thread migration in arch_timer_edge_cases
KVM: arm64: selftests: Fix help text for arch_timer_edge_cases
KVM: arm64: Make __vcpu_sys_reg() a pure rvalue operand
KVM: arm64: Don't use __vcpu_sys_reg() to get the address of a sysreg
KVM: arm64: Add RMW specific sysreg accessor
KVM: arm64: Add assignment-specific sysreg accessor
