Simplify the scheduler by making CONFIG_SMP=y primitives and data
structures unconditional.
Introduce transitory wrappers for functionality not yet converted to SMP.
Note that this patch is pretty large, because there's no clear separation
between various aspects of the SMP scheduler, it's basically a huge block
of #ifdef CONFIG_SMP. A fair amount of it has to be switched on for it to
boot and work on UP systems.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250528080924.2273858-21-mingo@kernel.org
Simplify the scheduler by making CONFIG_SMP=y primitives and data
structures unconditional.
Unconditionally build kernel/sched/topology.c and the main sched-domains
locking primitives.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250528080924.2273858-20-mingo@kernel.org
Set GT min frequency to 1200Mhz once driver load is complete.
v2: Review comments (Rodrigo)
v3: Apply Wa earlier so user_req_min is not clobbered.
v4: Apply to all GTs (Lucas)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250612-wa-14022085890-v4-3-94ba5dcc1e30@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Messaging to GuC may get canceled when device is wedged. Don't
flag this as an error in xe_guc_pc code.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250612-wa-14022085890-v4-1-94ba5dcc1e30@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The PCIe controller on the SG2044 is Designware based with custom app
registers.
Add binding document for SG2044 PCIe host controller.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250504004420.202685-2-inochiama@gmail.com
Nested file systems, that is those which invoke call_mmap() within their
own f_op->mmap() handlers, may encounter underlying file systems which
provide the f_op->mmap_prepare() hook introduced by commit c84bf6dd2b
("mm: introduce new .mmap_prepare() file callback").
We have a chicken-and-egg scenario here - until all file systems are
converted to using .mmap_prepare(), we cannot convert these nested
handlers, as we can't call f_op->mmap from an .mmap_prepare() hook.
So we have to do it the other way round - invoke the .mmap_prepare() hook
from an .mmap() one.
in order to do so, we need to convert VMA state into a struct vm_area_desc
descriptor, invoking the underlying file system's f_op->mmap_prepare()
callback passing a pointer to this, and then setting VMA state accordingly
and safely.
This patch achieves this via the compat_vma_mmap_prepare() function, which
we invoke from call_mmap() if f_op->mmap_prepare() is specified in the
passed in file pointer.
We place the fundamental logic into mm/vma.h where VMA manipulation
belongs. We also update the VMA userland tests to accommodate the
changes.
The compat_vma_mmap_prepare() function and its associated machinery is
temporary, and will be removed once the conversion of file systems is
complete.
We carefully place this code so it can be used with CONFIG_MMU and also
with cutting edge nommu silicon.
[akpm@linux-foundation.org: export compat_vma_mmap_prepare tp fix build]
[lorenzo.stoakes@oracle.com: remove unused declarations]
Link: https://lkml.kernel.org/r/ac3ae324-4c65-432a-8c6d-2af988b18ac8@lucifer.local
Link: https://lkml.kernel.org/r/20250609165749.344976-1-lorenzo.stoakes@oracle.com
Fixes: c84bf6dd2b ("mm: introduce new .mmap_prepare() file callback").
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Closes: https://lore.kernel.org/linux-mm/CAG48ez04yOEVx1ekzOChARDDBZzAKwet8PEoPM4Ln3_rk91AzQ@mail.gmail.com/
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The events xdp_cpumap_kthread, xdp_cpumap_enqueue and xdp_devmap_xmit are
only called when CONFIG_BPF_SYSCALL is defined. As each event can take up
to 5K regardless if they are used or not, it's best not to define them
when they are not used. Add #ifdef around these events when they are not
used.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20250612182023.78397b76@batman.local.home
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Each TRACE_EVENT() defined can take up around 5K of text and meta data
regardless if they are used or not. New code is being developed that will
warn when a tracepoint is defined but not used.
The trace events xdp_redirect_map and xdp_redirect_map_err are defined but
not used, but there's also a comment that states these are kept around for
backward compatibility. Which is interesting because since they are not
used, any old BPF program that expects them to exist will get incorrect
data (no data) when they use them. It's worse than not working, it's
silently failing.
Remove them as they will soon cause warnings, or if they really need to
stick around, then code needs to be added to use them.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20250611155615.0c2cf61c@batman.local.home
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If readlink() fails, len will be -1, which can cause negative indexing
and undefined behavior. This patch ensures that len is set to 0 on
readlink failure, preventing such issues.
Signed-off-by: Ruslan Semchenko <uncleruc2075@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250612131816.1870-1-uncleruc2075@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On arm64 with 64KB page size, the selftest xdp_do_redirect failed like
below:
...
test_xdp_do_redirect:PASS:pkt_count_tc 0 nsec
test_max_pkt_size:PASS:prog_run_max_size 0 nsec
test_max_pkt_size:FAIL:prog_run_too_big unexpected prog_run_too_big: actual -28 != expected -22
With 64KB page size, the xdp frame size will be much bigger so
the existing test will fail.
Adjust various parameters so the test can also work on 64K page size.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250612035042.2208630-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When running BPF selftests on arm64 with a 64K page size, I encountered
the following two test failures:
sockmap_basic/sockmap skb_verdict change tail:FAIL
tc_change_tail:FAIL
With further debugging, I identified the root cause in the following
kernel code within __bpf_skb_change_tail():
u32 max_len = BPF_SKB_MAX_LEN;
u32 min_len = __bpf_skb_min_len(skb);
int ret;
if (unlikely(flags || new_len > max_len || new_len < min_len))
return -EINVAL;
With a 4K page size, new_len = 65535 and max_len = 16064, the function
returns -EINVAL. However, With a 64K page size, max_len increases to
261824, allowing execution to proceed further in the function. This is
because BPF_SKB_MAX_LEN scales with the page size and larger page sizes
result in higher max_len values.
Updating the new_len parameter in both tests based on actual kernel
page size resolved both failures.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250612035037.2207911-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow failed on
arm64 with 64KB page:
xdp_adjust_tail/xdp_adjust_frags_tail_grow:FAIL
In bpf_prog_test_run_xdp(), the xdp->frame_sz is set to 4K, but later on
when constructing frags, with 64K page size, the frag data_len could
be more than 4K. This will cause problems in bpf_xdp_frags_increase_tail().
To fix the failure, the xdp->frame_sz is set to be PAGE_SIZE so kernel
can test different page size properly. With the kernel change, the user
space and bpf prog needs adjustment. Currently, the MAX_SKB_FRAGS default
value is 17, so for 4K page, the maximum packet size will be less than 68K.
To test 64K page, a bigger maximum packet size than 68K is desired. So two
different functions are implemented for subtest xdp_adjust_frags_tail_grow.
Depending on different page size, different data input/output sizes are used
to adapt with different page size.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250612035032.2207498-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Starting with commit e6ef4f8ede ("gpio: vf610: make irq_chip immutable")
gpio-vf610 supports locking GPIO being used for IRQ. This already prevents
configuring the GPIO as output, so there is no need for a GPIO hog.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMa9352 is only using LPDDR4X, so the BUCK2 regulator should be fixed
at 600MV.
Fixes: d2858e6bd3 ("arm64: dts: freescale: imx93-tqma9352: Add PMIC node")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().
So use the dev_fwnode() helper.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20250611104348.192092-15-jirislaby@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document support for the GBETH IP found on the Renesas RZ/G3E (R9A09G047) SoC.
The GBETH block on RZ/G3E is equivalent in functionality to the GBETH found on
RZ/V2H(P) (R9A09G057).
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250611061204.15393-1-john.madieu.xa@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Select BT_HCIUART_BCM so that Bluetooth can work by default on a
imx7s-warp board with a BCM43455 Wifi/Bluetooth chip.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
GPIO5_10 is connected to the BCM43455 WL_REG_ON pin and it is better
descrbed via mmc-pwrseq-simple.yaml.
Also improve the Wifi devicetree description by passing a compatible
string that describes the BCM43455 presence as per brcm,bcm4329-fmac.yaml.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
GPIO5_17 is connected to the BCM43455 BT_REG_ON pin.
Improve the Bluetooth devicetree description by using a more accurate
description of the hardware as per brcm,bluetooth.yaml.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Make use of the return value from napi_complete_done(). This allows
users to use the gro_flush_timeout and napi_defer_hard_irqs sysfs
attributes for configuring software interrupt coalescing.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250611212730.252342-2-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No driver should spam the kernel log when merely being loaded.
The message in hclge_init() is clearly a debug message.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jijie Shao<shaojijie@huawei.com>
Link: https://patch.msgid.link/c2ac6f20f85056e7b35bd56d424040f996d32109.1749657070.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simplify the arguments passed to phy_get_internal_delay() - the "dev"
argument is always &phydev->mdio.dev, and as the phydev is passed in,
there's no need to also pass in the struct device, especially when this
function is the only reason for the caller to have a local "dev"
variable.
Remove the redundant "dev" argument, and update the callers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1uPLwB-003VzR-4C@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
genphy_c45_read_status() is exported, so we can move definition of
genphy_c45_driver to phy_device.c and make it static. This helps
to clean up phy.h a little.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/ead3ab17-22d0-4cd3-901c-3d493ab851e6@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hash based multicast filtering is an optional feature. Currently,
driver overrides the value of multicast_filter_bins based on the hash
table size. If the feature is not supported, hash table size reads 0
however the value of multicast_filter_bins remains set to default
HASH_TABLE_SIZE which is incorrect. Let's extend the use of the property
snps,multicast-filter-bins to xgmac so it can be set to 0 via devicetree
to indicate multicast filtering is not supported.
Signed-off-by: Nikunj Kela <nikunj.kela@sima.ai>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Link: https://patch.msgid.link/20250610200411.3751943-1-nikunj.kela@sima.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In NC-SI spec v1.2 section 8.4.44.2, the firmware name doesn't
need to be null terminated while its size occupies the full size
of the field. Fix the buffer overflow issue by adding one
additional byte for null terminator.
Signed-off-by: Hari Kalavakunta <kalavakunta.hari.prasad@gmail.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Link: https://patch.msgid.link/20250610193338.1368-1-kalavakunta.hari.prasad@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
