Plugging in a "Blue snowball" microphone always shows the
error 'No inputs registered, leaving', but the device functions as
intended.
When a HID device is started using the function hid_hw_start() and
the argument HID_CONNECT_DEFAULT it will try all various hid connect
requests. Not all devices will create an input device and so the
message is needlessly noisy. Decrease it to debug instead.
[jkosina@suse.com: edit shortlog]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C)
report a HID sensor interface that is not actually implemented.
Attempting to access this non-functional sensor via iio_info causes
system hangs as runtime PM tries to wake up an unresponsive sensor.
Add these 2 devices to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace.
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When detecting an invalid list->hdev, the process needs to manually set
its state to TASK_RUNNING and exit. In the original code,
set_current_state() (which includes a memory barrier) is used here, but
it is immediately followed by a mutex_unlock() call. Since
mutex_unlock() internally includes a memory barrier, this ensures that
all modifications within the critical section (including the process
state) are visible to other CPUs. Therefore, replacing it with
__set_current_state() (without an implicit barrier) avoids redundant
memory barriers.
Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Two 'static inline' TDX helper functions (sc_retry() and
sc_retry_prerr()) take function pointer arguments which refer to
assembly functions. Normally, the compiler inlines the TDX helper,
realizes that the function pointer targets are completely static --
thus can be resolved at compile time -- and generates direct call
instructions.
But, other times (like when CONFIG_CC_OPTIMIZE_FOR_SIZE=y), the
compiler declines to inline the helpers and will instead generate
indirect call instructions.
Indirect calls to assembly functions require special annotation (for
various Control Flow Integrity mechanisms). But TDX assembly
functions lack the special annotations and can only be called
directly.
Annotate both the helpers as '__always_inline' to prod the compiler
into maintaining the direct calls. There is no guarantee here, but
Peter has volunteered to report the compiler bug if this assumption
ever breaks[1].
Fixes: 1e66a7e275 ("x86/virt/tdx: Handle SEAMCALL no entropy error in common code")
Fixes: df01f5ae07 ("x86/virt/tdx: Add SEAMCALL error printing for module initialization")
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/20250605145914.GW39944@noisy.programming.kicks-ass.net/ [1]
Link: https://lore.kernel.org/all/20250606130737.30713-1-kai.huang%40intel.com
Fixes blank line warning from checkpatch.pl script
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Fixes chechpatch.pl warning about missing blank line
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some third party trackpad replacements like that of HAWSON may have a
different PID than the stock trackpad. This commit adds one such trackpad
to hid-apple, available for MacBookPro15,1
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
While the T2 devices have been added to hid_mouse_ignore_list, no
driver exists outside the HID subsystem for their trackpads. So,
remove them and let the trackpad be at least used without the
gestures. This patch will also enable using hid-magicmouse for
these trackpads later, which is currently wip downstream.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The kernel now has a dedicated driver for Touch Bar on Macs. Since
function keys can now be accessed via the Touch Bar, emulating them
using non standard ways like Fn+1=F1 should be avoided.
This patch adds an fnmode=4 which ignores only the Function key
translation, and is enabled by default on MacBook Pros with a Touch
Bar.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add Apple Magic Keyboard 2024 with Touch ID and Numeric Keypad device ID
(05ac:0322) to those recognized by the hid-apple driver. Keyboard is
otherwise compatible with the existing implementation for its earlier
2021 model.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add Apple Magic Keyboard 2024 with Touch ID device ID (05ac:0321) to
those recognized by the hid-apple driver. Keyboard is otherwise
compatible with the existing implementation for its earlier 2021 model.
Signed-off-by: Grigorii Sokolik <g.sokol99@g-sokol.info>
Co-developed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The APPLE_IGNORE_MOUSE quirk was not used anywhere in this driver, so can
be removed.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There has been a continuous increase in the number of devices requiring
hid-apple driver during the last few years. Moreover, unlike previous
releases, the PIDs of the newer devices released cannot be combined in a
specific range, thus filling up the if else if statements with individual
device IDs. For such large table, its now more suitable to use switch case
instead of if else if for improved readability.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The apple_backlight_config_report and apple_backlight_set_report structs
were incorrectly placed between the translation tables. Fix this.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch call THC helper functions to enable Wake-on-Touch (WoT)
during driver initialization and disable it when driver is removed.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch call THC helper functions to enable Wake-on-Touch (WoT)
during driver initialization and disable it when driver is removed.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Wake-on-Touch (WoT) feature gives system the capability to wake from
sleep state by user touch event, it requires platform providing wake
GPIO through ACPI resource.
Intel UEFI provides a user setting to enable or disable THC device WoT
feature. If it's enabled, UEFI assigns an additional wake GPIO resource
to THC device ACPI configuration, facilitating system wakeup.
This patch provides helper APIs for THC device driver to query wake
GPIO resource, enable WoT feature and unconfigure WoT.
APIs added:
- thc_wot_config(): Query and configure wake-on-touch feature.
- thc_wot_unconfig(): Unconfig wake-on-touch feature.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
During customer board enabling, it was found: some touch devices
prepared reset response, but either forgot sending interrupt or
THC missed reset interrupt because of timing issue. THC QuickI2C
driver depends on interrupt to read reset response, in this case,
it will cause driver waiting timeout.
This patch enhances the flow by adding manually reset response
reading after waiting for reset interrupt timeout.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Fixes: 66b59bfce6 ("HID: intel-thc-hid: intel-quicki2c: Complete THC QuickI2C driver")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
On Panther Lake platform (PTL), THC hardware introduces two new features
for I2C subsystem:
- Input max input size control
- Input interrupt delay
This patch adds above new advanced features into QuickI2C driver, and
enables max input size control feature on PTL to improve QuickI2C
driver compatibility.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch defines driver data structure and adds it into QuickI2C
device structure. Changes PCI ID table to use PCI_DEVICE_DATA() to
pass platform specific driver data into driver, let driver has
capability to enable different hardware features according to
different platform driver data.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Align capitalization of the first characters for all code comments and
refine some descriptions.
Signed-off-by: Even Xu <even.xu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch adds support for a new feature, named "Interrupt Delay",
allowing driver to set a specific delay time for next interrupt
detection. It gives driver a capability to control THC waiting time for
the next interrupt, to reduce the likelihood of spurious readings.
APIs added:
- thc_i2c_set_rx_int_delay(): Set I2C Rx input interrupt delay value
- thc_i2c_rx_int_delay_enable(): Enable or disable I2C Rx interrupt delay
As this interrupt delay feature is only applicable to RxDMA and must
remain disabled during SWDMA operations, it also involves a change
in SWDMA code to record the max input size control feature state
before SWDMA and restore the state after SWDMA.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch adds support for a new feature, named "Max Input Size
Control", allowing driver to set a maximum input size for RxDMA. This
enhancement aims to prevent RxDMA buffer overruns caused by data
corruption on the I2C bus, thereby improving overall system stability.
APIs added:
- thc_i2c_set_rx_max_size(): Set the maximum input size for I2C RxDMA.
- thc_i2c_rx_max_size_enable(): Enable or disable the max input size
control.
As this max input size control feature is only applicable to RxDMA
and must remain disabled during SWDMA operations, it also involves
a change in SWDMA code to record the max input size control feature
state before SWDMA and restore the state after SWDMA.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Align capitalization of the first characters for THC structure
definition comments in header files.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Convert thc_dma_content structure comments format into kernel doc
format, let it can be included into kernel doc.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Ensure we don't stall or panic the kernel when using bluetooth-connected
controllers. This was reported as an issue on android devices using
kernel 6.6 due to the resume hook which had been added for usb joycons.
First, set a new state value to JOYCON_CTLR_STATE_SUSPENDED in a
newly-added nintendo_hid_suspend. This makes sure we will not stall out
the kernel waiting for input reports during led classdev suspend. The
stalls could happen if connectivity is unreliable or lost to the
controller prior to suspend.
Second, since we lose connectivity during suspend, do not try
joycon_init() for bluetooth controllers in the nintendo_hid_resume path.
Tested via multiple suspend/resume flows when using the controller both
in USB and bluetooth modes.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When sysfs_create_files() fails in wacom_initialize_remotes() the error
is returned and the cleanup action will not have been registered yet.
As a result the kobject???s refcount is never dropped, so the
kobject can never be freed leading to a reference leak.
Fix this by calling kobject_put() before returning.
Fixes: 83e6b40e2d ("HID: wacom: EKR: have the wacom resources dynamically allocated")
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When sysfs_create_files() fails during wacom_initialize_remotes() the
fifo buffer is not freed leading to a memory leak.
Fix this by calling kfifo_free() before returning.
Fixes: 83e6b40e2d ("HID: wacom: EKR: have the wacom resources dynamically allocated")
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
During wacom_initialize_remotes() a fifo buffer is allocated
with kfifo_alloc() and later a cleanup action is registered
during devm_add_action_or_reset() to clean it up.
However if the code fails to create a kobject and register it
with sysfs the code simply returns -ENOMEM before the cleanup
action is registered leading to a memory leak.
Fix this by ensuring the fifo is freed when the kobject creation
and registration process fails.
Fixes: 83e6b40e2d ("HID: wacom: EKR: have the wacom resources dynamically allocated")
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Commit a17b37a3f4 ("x86/idle: Change arguments of mwait_idle_with_hints()
to u32") changed the type of arguments of mwait_idle_with_hints() from
unsigned long to u32.
Change the type of variables in the call to mwait_idle_with_hints() to
unsigned int to follow the change.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://patch.msgid.link/20250609063528.48715-1-ubizjak@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On the MSI Modern 14 C5M the ECDT table contains invalid data:
UID : 00000000
GPE Number : 00 /* Invalid, 03 would be correct */
Namepath : "" /* Invalid, "\_SB.PCI0.SBRG.EC" would
* be correct
*/
This slows down the EC access as the wrong GPE event is used for
communication. Additionally the ID string is invalid.
Ignore such faulty ECDT tables by verifying that the ID string has
a valid format.
Tested-by: glpnk@proton.me
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20250529235310.540530-1-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With nosmp in cmdline, other CPUs are not brought up, leaving
their cpc_desc_ptr NULL. CPU0's iteration via for_each_possible_cpu()
dereferences these NULL pointers, causing panic.
Panic backtrace:
[ 0.401123] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b8
...
[ 0.403255] [<ffffffff809a5818>] cppc_allow_fast_switch+0x6a/0xd4
...
Kernel panic - not syncing: Attempted to kill init!
Fixes: 3cc30dd00a ("cpufreq: CPPC: Enable fast_switch")
Reported-by: Xu Lu <luxu.kernel@bytedance.com>
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://patch.msgid.link/20250604023036.99553-1-cuiyunhui@bytedance.com
[ rjw: New subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit a17b37a3f4 ("x86/idle: Change arguments of mwait_idle_with_hints()
to u32") changed the type of arguments of mwait_idle_with_hints() from
unsigned long to u32.
Change the type of variables in the call to mwait_idle_with_hints() to
unsigned int to follow the change.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://patch.msgid.link/20250609064235.49146-1-ubizjak@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix a compile error in the `impl_has_hr_timer!` macro as follows:
error[E0599]: no method named cast_mut found for raw pointer *mut Foo in the current scope
The `container_of!` macro already returns a mutable pointer when used
in a `*mut T` context so the `.cast_mut()` method is not available.
[ We missed this one because there is no caller yet and it is
a macro. - Miguel ]
Fixes: 74d6a606c2 ("rust: retain pointer mut-ness in `container_of!`")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250606020505.3186533-1-fujita.tomonori@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Camera PLLs on X1E80100 require both MMCX and MXC rails to be kept ON
to configure the PLLs properly. Hence move runtime power management,
PLL configuration and enabling critical clocks to qcom_cc_really_probe()
which ensures all required power domains are in enabled state before
configuring the PLLs or enabling the clocks.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # Dell Inspiron
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Link: https://lore.kernel.org/r/20250530-videocc-pll-multi-pd-voting-v5-12-02303b3a582d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Camera PLLs on SM8650 require both MMCX and MXC rails to be kept ON
to configure the PLLs properly. Hence move runtime power management,
PLL configuration and enabling critical clocks to qcom_cc_really_probe()
which ensures all required power domains are in enabled state before
configuring the PLLs or enabling the clocks.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250530-videocc-pll-multi-pd-voting-v5-11-02303b3a582d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Camera PLLs on SM8550 require both MMCX and MXC rails to be kept ON to
configure the PLLs properly. Hence move runtime power management, PLL
configuration and enabling critical clocks to qcom_cc_really_probe() which
ensures all required power domains are in enabled state before configuring
the PLLs or enabling the clocks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250530-videocc-pll-multi-pd-voting-v5-10-02303b3a582d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
