commit 5d92c3b41f upstream.
INTEL_MEI_GSC depends on either i915 or Xe
and can be present when either of above is present.
Cc: stable <stable@kernel.org>
Fixes: 87a4c85d3a ("drm/xe/gsc: add gsc device support")
Tested-by: Baoli Zhang <baoli.zhang@intel.com>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251109153533.3179787-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6dab2f61d upstream.
mei_register() fails to release the device reference in error paths
after device_initialize(). During normal device registration, the
reference is properly handled through mei_deregister() which calls
device_destroy(). However, in error handling paths (such as cdev_alloc
failure, cdev_add failure, etc.), missing put_device() calls cause
reference count leaks, preventing the device's release function
(mei_device_release) from being called and resulting in memory leaks
of mei_device.
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 7704e6be4e ("mei: hook mei_device on class device")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251104020133.5017-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d5925b667 upstream.
intel_th_output_open() calls bus_find_device_by_devt() which
internally increments the device reference count via get_device(), but
this reference is not properly released in several error paths. When
device driver is unavailable, file operations cannot be obtained, or
the driver's open method fails, the function returns without calling
put_device(), leading to a permanent device reference count leak. This
prevents the device from being properly released and could cause
resource exhaustion over time.
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 39f4034693 ("intel_th: Add driver infrastructure for Intel(R) Trace Hub devices")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20251112091723.35963-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d4e746aa9 upstream.
Fix below warnings generated dt_bindings_check for examples in the
bindings.
Documentation/devicetree/bindings/slimbus/slimbus.example.dtb:
slim@28080000 (qcom,slim-ngd-v1.5.0): 'audio-codec@1,0' does not match
any of the regexes: '^pinctrl-[0-9]+$', '^slim@[0-9a-f]+$'
from schema $id:
http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
Documentation/devicetree/bindings/slimbus/slimbus.example.dtb:
slim@28080000 (qcom,slim-ngd-v1.5.0): #address-cells: 1 was expected
from schema $id:
http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
Documentation/devicetree/bindings/slimbus/slimbus.example.dtb:
slim@28080000 (qcom,slim-ngd-v1.5.0): 'dmas' is a required property
from schema $id:
http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
Documentation/devicetree/bindings/slimbus/slimbus.example.dtb:
slim@28080000 (qcom,slim-ngd-v1.5.0): 'dma-names' is a required
property
from schema $id:
http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
Fixes: 7cbba32a2d ("slimbus: qcom: remove unused qcom controller driver")
Cc: stable <stable@kernel.org>
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20251114110505.143105-1-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82d12088c2 upstream.
Discovered by Atuin - Automated Vulnerability Discovery Engine.
In ac_ioctl, the validation of IndexCard and the check for a valid
RamIO pointer are skipped when cmd is 6. However, the function
unconditionally executes readb(apbs[IndexCard].RamIO + VERS) at the
end.
If cmd is 6, IndexCard may reference a board that does not exist
(where RamIO is NULL), leading to a NULL pointer dereference.
Fix this by skipping the readb access when cmd is 6, as this
command is a global information query and does not target a specific
board context.
Signed-off-by: Tianchu Chen <flynnnchen@tencent.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20251128155323.a786fde92ebb926cbe96fcb1@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1003aa7ec upstream.
On some platforms, switching USB roles from host to device can trigger
controller faults due to premature PHY power-down. This occurs when the
PHY is disabled too early during teardown, causing synchronization
issues between the PHY and controller.
Keep susphy enabled during dwc3_host_exit() and dwc3_gadget_exit()
ensures the PHY remains in a low-power state capable of handling
required commands during role switch.
Cc: stable <stable@kernel.org>
Fixes: 6d73572206 ("usb: dwc3: core: Prevent phy suspend during init")
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Udipto Goswami <udipto.goswami@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251126054221.120638-1-udipto.goswami@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 782be79e45 upstream.
A recent change fixing a device reference leak introduced a clock
imbalance by reusing an error path so that the clock may be disabled
before having been enabled.
Note that the clock framework allows for passing in NULL clocks so there
is no risk for a NULL pointer dereference.
Also drop the bogus I2C client NULL check added by the offending commit
as the pointer has already been verified to be non-NULL.
Fixes: c84117912b ("USB: lpc32xx_udc: Fix error handling in probe")
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4b64fda4d upstream.
A recent change fixing a device reference leak in a UDC driver
introduced a potential use-after-free in the non-OF case as the
isp1301_get_client() helper only increases the reference count for the
returned I2C device in the OF case.
Increment the reference count also for non-OF so that the caller can
decrement it unconditionally.
Note that this is inherently racy just as using the returned I2C device
is since nothing is preventing the PHY driver from being unbound while
in use.
Fixes: c84117912b ("USB: lpc32xx_udc: Fix error handling in probe")
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 41ca62e3e2 upstream.
The delayed work item otg_event is initialized in fsl_otg_conf() and
scheduled under two conditions:
1. When a host controller binds to the OTG controller.
2. When the USB ID pin state changes (cable insertion/removal).
A race condition occurs when the device is removed via fsl_otg_remove():
the fsl_otg instance may be freed while the delayed work is still pending
or executing. This leads to use-after-free when the work function
fsl_otg_event() accesses the already freed memory.
The problematic scenario:
(detach thread) | (delayed work)
fsl_otg_remove() |
kfree(fsl_otg_dev) //FREE| fsl_otg_event()
| og = container_of(...) //USE
| og-> //USE
Fix this by calling disable_delayed_work_sync() in fsl_otg_remove()
before deallocating the fsl_otg structure. This ensures the delayed work
is properly canceled and completes execution prior to memory deallocation.
This bug was identified through static analysis.
Fixes: 0807c500a1 ("USB: add Freescale USB OTG Transceiver driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/20251205034831.12846-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c84117912b upstream.
lpc32xx_udc_probe() acquires an i2c_client reference through
isp1301_get_client() but fails to release it in both error handling
paths and the normal removal path. This could result in a reference
count leak for the I2C device, preventing proper cleanup and potentially
leading to resource exhaustion. Add put_device() to release the
reference in the probe failure path and in the remove function.
Calling path: isp1301_get_client() -> of_find_i2c_device_by_node() ->
i2c_find_device_by_fwnode(). As comments of i2c_find_device_by_fwnode()
says, 'The user must call put_device(&client->dev) once done with the
i2c client.'
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 24a28e4283 ("USB: gadget driver for LPC32xx")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20251215020931.15324-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d14cd998e6 upstream.
Selecting DRM_AUX_HPD_BRIDGE is not possible from a built-in driver when
CONFIG_DRM=m:
WARNING: unmet direct dependencies detected for DRM_AUX_HPD_BRIDGE
Depends on [m]: HAS_IOMEM [=y] && DRM [=m] && DRM_BRIDGE [=y] && OF [=y]
Selected by [y]:
- UCSI_HUAWEI_GAOKUN [=y] && USB_SUPPORT [=y] && TYPEC [=y] && TYPEC_UCSI [=y] && EC_HUAWEI_GAOKUN [=y] && DRM_BRIDGE [=y] && OF [=y]
Add the same dependency we have in similar drivers to work around this.
Fixes: 00327d7f2c ("usb: typec: ucsi: add Huawei Matebook E Go ucsi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251204101111.1035975-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 356d1924b9 upstream.
Platform drivers can be probed after their init sections have been
discarded (e.g. on probe deferral or manual rebind through sysfs) so the
probe function and match table must not live in init.
Fixes: 783f6d3dcf ("phy: bcm63xx-usbh: Add BCM63xx USBH driver")
Cc: stable@vger.kernel.org # 5.9
Cc: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251017054537.6884-1-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be440980ea upstream.
The pvr2_trace message is reporting an error about control read
transfers, however it is using the incorrect variable write_len
instead of read_lean. Fix this by using the correct variable
read_len.
Fixes: d855497edb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18")
Cc: stable@vger.kernel.org
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b91e6aafe8 upstream.
rlen value is a user-controlled value, but dtv5100_i2c_msg() does not
check the size of the rlen value. Therefore, if it is set to a value
larger than sizeof(st->data), an out-of-bounds vuln occurs for st->data.
Therefore, we need to add proper range checking to prevent this vuln.
Fixes: 60688d5e6e ("V4L/DVB (8735): dtv5100: replace dummy frontend by zl10353")
Cc: stable@vger.kernel.org
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0831269b5f upstream.
We cannot determine which models require the NO_ATA_1X and
IGNORE_RESIDUE quirks aside from the EL-R12 optical drive device.
Fixes: 955a48a535 ("usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.")
Signed-off-by: Chen Changcheng <chenchangcheng@kylinos.cn>
Link: https://patch.msgid.link/20251218012318.15978-1-chenchangcheng@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ea6190f42 upstream.
The MPTCP protocol usually schedule the retransmission timer only
when there is some chances for such retransmissions to happen.
With a notable exception: __mptcp_push_pending() currently schedule
such timer unconditionally, potentially leading to unnecessary rtx
timer expiration.
The issue is present since the blamed commit below but become easily
reproducible after commit 27b0e701d3 ("mptcp: drop bogus optimization
in __mptcp_check_push()")
Fixes: 33d41c9cd7 ("mptcp: more accurate timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-3-9e4781a6c1b8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29f4801e9c upstream.
This validates the previous commit: the userspace can set unknown flags
-- the 7th bit is currently unused -- without errors, but only the
supported ones are printed in the endpoints dumps.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-2-9e4781a6c1b8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ace3297a7 upstream.
Before this patch, the kernel was saving any flags set by the userspace,
even unknown ones. This doesn't cause critical issues because the kernel
is only looking at specific ones. But on the other hand, endpoints dumps
could tell the userspace some recent flags seem to be supported on older
kernel versions.
Instead, ignore all unknown flags when parsing them. By doing that, the
userspace can continue to set unsupported flags, but it has a way to
verify what is supported by the kernel.
Note that it sounds better to continue accepting unsupported flags not
to change the behaviour, but also that eases things on the userspace
side by adding "optional" endpoint types only supported by newer kernel
versions without having to deal with the different kernel versions.
A note for the backports: there will be conflicts in mptcp.h on older
versions not having the mentioned flags, the new line should still be
added last, and the '5' needs to be adapted to have the same value as
the last entry.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-1-9e4781a6c1b8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f35040de5 upstream.
Currently, kvfree_rcu_barrier() flushes RCU sheaves across all slab
caches when a cache is destroyed. This is unnecessary; only the RCU
sheaves belonging to the cache being destroyed need to be flushed.
As suggested by Vlastimil Babka, introduce a weaker form of
kvfree_rcu_barrier() that operates on a specific slab cache.
Factor out flush_rcu_sheaves_on_cache() from flush_all_rcu_sheaves() and
call it from flush_all_rcu_sheaves() and kvfree_rcu_barrier_on_cache().
Call kvfree_rcu_barrier_on_cache() instead of kvfree_rcu_barrier() on
cache destruction.
The performance benefit is evaluated on a 12 core 24 threads AMD Ryzen
5900X machine (1 socket), by loading slub_kunit module.
Before:
Total calls: 19
Average latency (us): 18127
Total time (us): 344414
After:
Total calls: 19
Average latency (us): 10066
Total time (us): 191264
Two performance regression have been reported:
- stress module loader test's runtime increases by 50-60% (Daniel)
- internal graphics test's runtime on Tegra234 increases by 35% (Jon)
They are fixed by this change.
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Fixes: ec66e0d599 ("slab: add sheaf support for batching kfree_rcu() operations")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mm/1bda09da-93be-4737-aef0-d47f8c5c9301@suse.cz
Reported-and-tested-by: Daniel Gomez <da.gomez@samsung.com>
Closes: https://lore.kernel.org/linux-mm/0406562e-2066-4cf8-9902-b2b0616dd742@kernel.org
Reported-and-tested-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/linux-mm/e988eff6-1287-425e-a06c-805af5bbf262@nvidia.com
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20251207154148.117723-1-harry.yoo@oracle.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31b931bebd upstream.
After commit a50f7456f8 ("dma-mapping: Allow use of DMA_BIT_MASK(64) in
global scope"), the DMA_BIT_MASK() macro is broken when passed non trivial
statements for the value of 'n'. This is caused by the new version missing
parenthesis around 'n' when evaluating 'n'.
One example of this breakage is the IPU6 driver now crashing due to
it getting DMA-addresses with address bit 32 set even though it has
tried to set a 32 bit DMA mask.
The IPU6 CSI2 engine has a DMA mask of either 31 or 32 bits depending
on if it is in secure mode or not and it sets this masks like this:
mmu_info->aperture_end =
(dma_addr_t)DMA_BIT_MASK(isp->secure_mode ?
IPU6_MMU_ADDR_BITS :
IPU6_MMU_ADDR_BITS_NON_SECURE);
So the 'n' argument here is "isp->secure_mode ? IPU6_MMU_ADDR_BITS :
IPU6_MMU_ADDR_BITS_NON_SECURE" which gets expanded into:
isp->secure_mode ? IPU6_MMU_ADDR_BITS : IPU6_MMU_ADDR_BITS_NON_SECURE - 1
With the -1 only being applied in the non secure case, causing
the secure mode mask to be one 1 bit too large.
Fixes: a50f7456f8 ("dma-mapping: Allow use of DMA_BIT_MASK(64) in global scope")
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251207184756.97904-1-johannes.goede@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit adc15829fb upstream.
With the generic crashkernel reservation, the kernel emits the following
warning on powerpc:
WARNING: CPU: 0 PID: 1 at arch/powerpc/mm/mem.c:341 add_system_ram_resources+0xfc/0x180
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-auto-12607-g5472d60c129f #1 VOLUNTARY
Hardware name: IBM,9080-HEX Power11 (architected) 0x820200 0xf000007 of:IBM,FW1110.01 (NH1110_069) hv:phyp pSeries
NIP: c00000000201de3c LR: c00000000201de34 CTR: 0000000000000000
REGS: c000000127cef8a0 TRAP: 0700 Not tainted (6.17.0-auto-12607-g5472d60c129f)
MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 84000840 XER: 20040010
CFAR: c00000000017eed0 IRQMASK: 0
GPR00: c00000000201de34 c000000127cefb40 c0000000016a8100 0000000000000001
GPR04: c00000012005aa00 0000000020000000 c000000002b705c8 0000000000000000
GPR08: 000000007fffffff fffffffffffffff0 c000000002db8100 000000011fffffff
GPR12: c00000000201dd40 c000000002ff0000 c0000000000112bc 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 c0000000015a3808
GPR24: c00000000200468c c000000001699888 0000000000000106 c0000000020d1950
GPR28: c0000000014683f8 0000000081000200 c0000000015c1868 c000000002b9f710
NIP [c00000000201de3c] add_system_ram_resources+0xfc/0x180
LR [c00000000201de34] add_system_ram_resources+0xf4/0x180
Call Trace:
add_system_ram_resources+0xf4/0x180 (unreliable)
do_one_initcall+0x60/0x36c
do_initcalls+0x120/0x220
kernel_init_freeable+0x23c/0x390
kernel_init+0x34/0x26c
ret_from_kernel_user_thread+0x14/0x1c
This warning occurs due to a conflict between crashkernel and System RAM
iomem resources.
The generic crashkernel reservation adds the crashkernel memory range to
/proc/iomem during early initialization. Later, all memblock ranges are
added to /proc/iomem as System RAM. If the crashkernel region overlaps
with any memblock range, it causes a conflict while adding those memblock
regions as iomem resources, triggering the above warning. The conflicting
memblock regions are then omitted from /proc/iomem.
For example, if the following crashkernel region is added to /proc/iomem:
20000000-11fffffff : Crash kernel
then the following memblock regions System RAM regions fail to be inserted:
00000000-7fffffff : System RAM
80000000-257fffffff : System RAM
Fix this by not adding the crashkernel memory to /proc/iomem on powerpc.
Introduce an architecture hook to let each architecture decide whether to
export the crashkernel region to /proc/iomem.
For more info checkout commit c40dd2f766 ("powerpc: Add System RAM
to /proc/iomem") and commit bce074bdbc ("powerpc: insert System RAM
resource to prevent crashkernel conflict")
Note: Before switching to the generic crashkernel reservation, powerpc
never exported the crashkernel region to /proc/iomem.
Link: https://lkml.kernel.org/r/20251016142831.144515-1-sourabhjain@linux.ibm.com
Fixes: e3185ee438 ("powerpc/crash: use generic crashkernel reservation").
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/all/90937fe0-2e76-4c82-b27e-7b8a7fe3ac69@linux.ibm.com/
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Baoquan he <bhe@redhat.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bda1cbf73c upstream.
tpm2_read_public() has some rudimentary range checks but the function does
not ensure that the response buffer has enough bytes for the full TPMT_HA
payload.
Re-implement the function with necessary checks and validation, and return
name and name size for all handle types back to the caller.
Cc: stable@vger.kernel.org # v6.10+
Fixes: d0a25bb961 ("tpm: Add HMAC session name/handle append")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e9722e9a7 upstream.
'name_size' does not have any range checks, and it just directly indexes
with TPM_ALG_ID, which could lead into memory corruption at worst.
Address the issue by only processing known values and returning -EINVAL for
unrecognized values.
Make also 'tpm_buf_append_name' and 'tpm_buf_fill_hmac_session' fallible so
that errors are detected before causing any spurious TPM traffic.
End also the authorization session on failure in both of the functions, as
the session state would be then by definition corrupted.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 1085b8276b ("tpm: Add the rest of the session HMAC API")
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a1351cd41 upstream.
We add pmd folio into ds_queue on the first page fault in
__do_huge_pmd_anonymous_page(), so that we can split it in case of memory
pressure. This should be the same for a pmd folio during wp page fault.
Commit 1ced09e033 ("mm: allocate THP on hugezeropage wp-fault") miss to
add it to ds_queue, which means system may not reclaim enough memory in
case of memory pressure even the pmd folio is under used.
Move deferred_split_folio() into map_anon_folio_pmd() to make the pmd
folio installation consistent.
Link: https://lkml.kernel.org/r/20251008095453.18772-2-richard.weiyang@gmail.com
Fixes: 1ced09e033 ("mm: allocate THP on hugezeropage wp-fault")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Acked-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 082b86919b upstream.
Commit cbd9463da1 ("media: v4l2-mem2mem: Avoid calling .device_run in
v4l2_m2m_job_finish") deferred calls to .device_run() to a work queue to
avoid recursive calls when a job is finished right away from
.device_run(). It failed to update the v4l2_m2m_job_finish()
documentation that still states the function must not be called from
.device_run(). Fix it.
Fixes: cbd9463da1 ("media: v4l2-mem2mem: Avoid calling .device_run in v4l2_m2m_job_finish")
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 590c03ca6a upstream.
Patch series "ksm: fix exec/fork inheritance", v2.
This series fixes exec/fork inheritance. See the detailed description of
the issue below.
This patch (of 2):
Background
==========
commit d7597f59d1 ("mm: add new api to enable ksm per process")
introduced MMF_VM_MERGE_ANY for mm->flags, and allowed user to set it by
prctl() so that the process's VMAs are forcibly scanned by ksmd.
Subsequently, the 3c6f33b727 ("mm/ksm: support fork/exec for prctl")
supported inheriting the MMF_VM_MERGE_ANY flag when a task calls execve().
Finally, commit 3a9e567ca4 ("mm/ksm: fix ksm exec support for prctl")
fixed the issue that ksmd doesn't scan the mm_struct with MMF_VM_MERGE_ANY
by adding the mm_slot to ksm_mm_head in __bprm_mm_init().
Problem
=======
In some extreme scenarios, however, this inheritance of MMF_VM_MERGE_ANY
during exec/fork can fail. For example, when the scanning frequency of
ksmd is tuned extremely high, a process carrying MMF_VM_MERGE_ANY may
still fail to pass it to the newly exec'd process. This happens because
ksm_execve() is executed too early in the do_execve flow (prematurely
adding the new mm_struct to the ksm_mm_slot list).
As a result, before do_execve completes, ksmd may have already performed a
scan and found that this new mm_struct has no VM_MERGEABLE VMAs, thus
clearing its MMF_VM_MERGE_ANY flag. Consequently, when the new program
executes, the flag MMF_VM_MERGE_ANY inheritance missed.
Root reason
===========
commit d7597f59d1 ("mm: add new api to enable ksm per process") clear
the flag MMF_VM_MERGE_ANY when ksmd found no VM_MERGEABLE VMAs.
Solution
========
Firstly, Don't clear MMF_VM_MERGE_ANY when ksmd found no VM_MERGEABLE
VMAs, because perhaps their mm_struct has just been added to ksm_mm_slot
list, and its process has not yet officially started running or has not
yet performed mmap/brk to allocate anonymous VMAS.
Secondly, recheck MMF_VM_MERGEABLE again if a process takes
MMF_VM_MERGE_ANY, and create a mm_slot and join it into ksm_scan_list
again.
Link: https://lkml.kernel.org/r/20251007182504440BJgK8VXRHh8TD7IGSUIY4@zte.com.cn
Link: https://lkml.kernel.org/r/20251007182821572h_SoFqYZXEP1mvWI4n9VL@zte.com.cn
Fixes: 3c6f33b727 ("mm/ksm: support fork/exec for prctl")
Fixes: d7597f59d1 ("mm: add new api to enable ksm per process")
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Wang Yaxin <wang.yaxin@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 935a20d1be upstream.
Freezing the request queue from inside sysfs store callbacks may cause a
deadlock in combination with the dm-multipath driver and the
queue_if_no_path option. Additionally, freezing the request queue slows
down system boot on systems where sysfs attributes are set synchronously.
Fix this by removing the blk_mq_freeze_queue() / blk_mq_unfreeze_queue()
calls from the store callbacks that do not strictly need these callbacks.
Add the __data_racy annotation to request_queue.rq_timeout to suppress
KCSAN data race reports about the rq_timeout reads.
This patch may cause a small delay in applying the new settings.
For all the attributes affected by this patch, I/O will complete
correctly whether the old or the new value of the attribute is used.
This patch affects the following sysfs attributes:
* io_poll_delay
* io_timeout
* nomerges
* read_ahead_kb
* rq_affinity
Here is an example of a deadlock triggered by running test srp/002
if this patch is not applied:
task:multipathd
Call Trace:
<TASK>
__schedule+0x8c1/0x1bf0
schedule+0xdd/0x270
schedule_preempt_disabled+0x1c/0x30
__mutex_lock+0xb89/0x1650
mutex_lock_nested+0x1f/0x30
dm_table_set_restrictions+0x823/0xdf0
__bind+0x166/0x590
dm_swap_table+0x2a7/0x490
do_resume+0x1b1/0x610
dev_suspend+0x55/0x1a0
ctl_ioctl+0x3a5/0x7e0
dm_ctl_ioctl+0x12/0x20
__x64_sys_ioctl+0x127/0x1a0
x64_sys_call+0xe2b/0x17d0
do_syscall_64+0x96/0x3a0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
task:(udev-worker)
Call Trace:
<TASK>
__schedule+0x8c1/0x1bf0
schedule+0xdd/0x270
blk_mq_freeze_queue_wait+0xf2/0x140
blk_mq_freeze_queue_nomemsave+0x23/0x30
queue_ra_store+0x14e/0x290
queue_attr_store+0x23e/0x2c0
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3b2/0x630
vfs_write+0x4fd/0x1390
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x276/0x17d0
do_syscall_64+0x96/0x3a0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Nilay Shroff <nilay@linux.ibm.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Benjamin Marzinski <bmarzins@redhat.com>
Cc: stable@vger.kernel.org
Fixes: af28141498 ("block: freeze the queue in queue_attr_store")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40a71b53d5 upstream.
jbd2 journal handling code doesn't want jbd2_might_wait_for_commit()
to be placed between start_this_handle() and stop_this_handle(). So it
marks the region with rwsem_acquire_read() and rwsem_release().
However, the annotation is too strong for that purpose. We don't have
to use more than try lock annotation for that.
rwsem_acquire_read() implies:
1. might be a waiter on contention of the lock.
2. enter to the critical section of the lock.
All we need in here is to act 2, not 1. So trylock version of
annotation is sufficient for that purpose. Now that dept partially
relies on lockdep annotaions, dept interpets rwsem_acquire_read() as a
potential wait and might report a deadlock by the wait.
Replace it with trylock version of annotation.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Message-ID: <20251024073940.1063-1-byungchul@sk.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c11c56eb3 upstream.
Kernel commit 0a6ce20c15 ("ext4: verify orphan file size is not too big")
limits the maximum supported orphan file size to 8 << 20.
However, in e2fsprogs, the orphan file size is set to 32–512 filesystem
blocks when creating a filesystem.
With 64k block size, formatting an ext4 fs >32G gives an orphan file bigger
than the kernel allows, so mount prints an error and fails:
EXT4-fs (vdb): orphan file too big: 8650752
EXT4-fs (vdb): mount failed
To prevent this issue and allow previously created 64KB filesystems to
mount, we updates the maximum allowed orphan file size in the kernel to
512 filesystem blocks.
Fixes: 0a6ce20c15 ("ext4: verify orphan file size is not too big")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251120134233.2994147-1-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f7a79d05c upstream.
When the MB_CHECK_ASSERT macro is enabled, an assertion failure can
occur in __mb_check_buddy when checking preallocated blocks (pa) in
a block group:
Assertion failure in mb_free_blocks() : "groupnr == e4b->bd_group"
This happens when a pa at the very end of a block group (e.g.,
pa_pstart=32765, pa_len=3 in a group of 32768 blocks) becomes
exhausted - its pa_pstart is advanced by pa_len to 32768, which
lies in the next block group. If this exhausted pa (with pa_len == 0)
is still in the bb_prealloc_list during the buddy check, the assertion
incorrectly flags it as belonging to the wrong group. A possible
sequence is as follows:
ext4_mb_new_blocks
ext4_mb_release_context
pa->pa_pstart += EXT4_C2B(sbi, ac->ac_b_ex.fe_len)
pa->pa_len -= ac->ac_b_ex.fe_len
__mb_check_buddy
for each pa in group
ext4_get_group_no_and_offset
MB_CHECK_ASSERT(groupnr == e4b->bd_group)
To fix this, we modify the check to skip block group validation for
exhausted preallocations (where pa_len == 0). Such entries are in a
transitional state and will be removed from the list soon, so they
should not trigger an assertion. This change prevents the false
positive while maintaining the integrity of the checks for active
allocations.
Fixes: c9de560ded ("ext4: Add multi block allocator for ext4")
Signed-off-by: Yongjian Sun <sunyongjian1@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251106060614.631382-2-sunyongjian@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4091c8206c upstream.
i_state_flags used on 32-bit archs, need to clear this flag when
alloc inode.
Find this issue when umount ext4, sometimes track the inode as orphan
accidently, cause ext4 mesg dump.
Fixes: acf943e976 ("ext4: fix checks for orphan inodes")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251104-ext4-v1-1-73691a0800f9@nxp.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b97cb7d6a0 upstream.
If ext4_get_inode_loc() fails (e.g. if it returns -EFSCORRUPTED),
iloc.bh will remain set to NULL. Since ext4_xattr_inode_dec_ref_all()
lacks error checking, this will lead to a null pointer dereference
in ext4_raw_inode(), called right after ext4_get_inode_loc().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c8e008b604 ("ext4: ignore xattrs past end")
Cc: stable@kernel.org
Signed-off-by: Karina Yankevich <k.yankevich@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Message-ID: <20251022093253.3546296-1-k.yankevich@omp.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3db63d2c2d upstream.
params.mount_opts may come as potentially non-NUL-term string. Userspace
is expected to pass a NUL-term string. Add an extra check to ensure this
holds true. Note that further code utilizes strscpy_pad() so this is just
for proper informing the user of incorrect data being provided.
Found by Linux Verification Center (linuxtesting.org).
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251101160430.222297-2-pchelkin@ispras.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee5a977b4e upstream.
strscpy_pad() can't be used to copy a non-NUL-term string into a NUL-term
string of possibly bigger size. Commit 0efc5990bc ("string.h: Introduce
memtostr() and memtostr_pad()") provides additional information in that
regard. So if this happens, the following warning is observed:
strnlen: detected buffer overflow: 65 byte read of buffer size 64
WARNING: CPU: 0 PID: 28655 at lib/string_helpers.c:1032 __fortify_report+0x96/0xc0 lib/string_helpers.c:1032
Modules linked in:
CPU: 0 UID: 0 PID: 28655 Comm: syz-executor.3 Not tainted 6.12.54-syzkaller-00144-g5f0270f1ba00 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:__fortify_report+0x96/0xc0 lib/string_helpers.c:1032
Call Trace:
<TASK>
__fortify_panic+0x1f/0x30 lib/string_helpers.c:1039
strnlen include/linux/fortify-string.h:235 [inline]
sized_strscpy include/linux/fortify-string.h:309 [inline]
parse_apply_sb_mount_options fs/ext4/super.c:2504 [inline]
__ext4_fill_super fs/ext4/super.c:5261 [inline]
ext4_fill_super+0x3c35/0xad00 fs/ext4/super.c:5706
get_tree_bdev_flags+0x387/0x620 fs/super.c:1636
vfs_get_tree+0x93/0x380 fs/super.c:1814
do_new_mount fs/namespace.c:3553 [inline]
path_mount+0x6ae/0x1f70 fs/namespace.c:3880
do_mount fs/namespace.c:3893 [inline]
__do_sys_mount fs/namespace.c:4103 [inline]
__se_sys_mount fs/namespace.c:4080 [inline]
__x64_sys_mount+0x280/0x300 fs/namespace.c:4080
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x64/0x140 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Since userspace is expected to provide s_mount_opts field to be at most 63
characters long with the ending byte being NUL-term, use a 64-byte buffer
which matches the size of s_mount_opts, so that strscpy_pad() does its job
properly. Return with error if the user still managed to provide a
non-NUL-term string here.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 8ecb790ea8 ("ext4: avoid potential buffer over-read in parse_apply_sb_mount_options()")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251101160430.222297-1-pchelkin@ispras.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66e7c1e0ee upstream.
With commit ("printk: Avoid scheduling irq_work on suspend") the
implementation of printk_get_console_flush_type() was modified to
avoid offloading when irq_work should be blocked during suspend.
Since printk uses the returned flush type to determine what
flushing methods are used, this was thought to be sufficient for
avoiding irq_work usage during the suspend phase.
However, vprintk_emit() implements a hack to support
printk_deferred(). In this hack, the returned flush type is
adjusted to make sure no legacy direct printing occurs when
printk_deferred() was used.
Because of this hack, the legacy offloading flushing method can
still be used, causing irq_work to be queued when it should not
be.
Adjust the vprintk_emit() hack to also consider
@console_irqwork_blocked so that legacy offloading will not be
chosen when irq_work should be blocked.
Link: https://lore.kernel.org/lkml/87fra90xv4.fsf@jogness.linutronix.de
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Fixes: 26873e3e7f ("printk: Avoid scheduling irq_work on suspend")
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d01ff281bd upstream.
Currently printk_trigger_flush() only triggers legacy offloaded
flushing, even if that may not be the appropriate method to flush
for currently registered consoles. (The function predates the
NBCON consoles.)
Since commit 6690d6b527 ("printk: Add helper for flush type
logic") there is printk_get_console_flush_type(), which also
considers NBCON consoles and reports all the methods of flushing
appropriate based on the system state and consoles available.
Update printk_trigger_flush() to use
printk_get_console_flush_type() to appropriately flush registered
consoles.
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/stable/20251113160351.113031-2-john.ogness%40linutronix.de
Tested-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://patch.msgid.link/20251113160351.113031-2-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 222047f68e upstream.
The freeze_all_ptr check in filesystems_freeze_callback() introduced by
commit a3f8f86627 ("power: always freeze efivarfs") is reverse which
quite confusingly causes all file systems to be frozen when
filesystem_freeze_enabled is false.
On my systems it causes the WARN_ON_ONCE() in __set_task_frozen() to
trigger, most likely due to an attempt to freeze a file system that is
not ready for that.
Add a logical negation to the check in question to reverse it as
appropriate.
Fixes: a3f8f86627 ("power: always freeze efivarfs")
Cc: 6.18+ <stable@vger.kernel.org> # 6.18+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12788397.O9o76ZdvQC@rafael.j.wysocki
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit faf07e611d upstream.
tpm2_get_pcr_allocation() does not cap any upper limit for the number of
banks. Cap the limit to eight banks so that out of bounds values coming
from external I/O cause on only limited harm.
Cc: stable@vger.kernel.org # v5.10+
Fixes: bcfff8384f ("tpm: dynamically allocate the allocated_banks array")
Tested-by: Lai Yi <yi1.lai@linux.intel.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3042cbe84 upstream.
The error path of copying the old config used the wrong variable in the
error message:
$ mkdir /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad
$ chmod 0 /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad good
cp /tmp/build//.config config-good.tmp ... [0 seconds] FAILED!
Use of uninitialized value $config in concatenation (.) or string at ./tools/testing/ktest/config-bisect.pl line 744.
failed to copy to config-good.tmp
When it should have shown:
failed to copy /tmp/build//.config to config-good.tmp
Cc: stable@vger.kernel.org
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Fixes: 0f0db06599 ("ktest: Add standalone config-bisect.pl program")
Link: https://patch.msgid.link/20251203180924.6862bd26@gandalf.local.home
Reported-by: "John W. Krahn" <jwkrahn@shaw.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 801f614ba2 upstream.
Some NTFS volumes failed to mount because sparse data runs were not
handled correctly during runlist unpacking. The code performed arithmetic
on the special SPARSE_LCN64 marker, leading to invalid LCN values and
mount errors.
Add an explicit check for the case described above, marking the run as
sparse without applying arithmetic.
Fixes: 736fc7bf5f ("fs: ntfs3: Fix integer overflow in run_unpack()")
Cc: stable@vger.kernel.org
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3f9f42232 upstream.
Currently when the length of a symbol is longer than 0x7f characters,
its type shown in /proc/kallsyms can be incorrect.
I found this issue when reading the code, but it can be reproduced by
following steps:
1. Define a function which symbol length is 130 characters:
#define X13(x) x##x##x##x##x##x##x##x##x##x##x##x##x
static noinline void X13(x123456789)(void)
{
printk("hello world\n");
}
2. The type in vmlinux is 't':
$ nm vmlinux | grep x123456
ffffffff816290f0 t x123456789x123456789x123456789x12[...]
3. Then boot the kernel, the type shown in /proc/kallsyms becomes 'g'
instead of the expected 't':
# cat /proc/kallsyms | grep x123456
ffffffff816290f0 g x123456789x123456789x123456789x12[...]
The root cause is that, after commit 73bbb94466 ("kallsyms: support
"big" kernel symbols"), ULEB128 was used to encode symbol name length.
That is, for "big" kernel symbols of which name length is longer than
0x7f characters, the length info is encoded into 2 bytes.
kallsyms_get_symbol_type() expects to read the first char of the
symbol name which indicates the symbol type. However, due to the
"big" symbol case not being handled, the symbol type read from
/proc/kallsyms may be wrong, so handle it properly.
Cc: stable@vger.kernel.org
Fixes: 73bbb94466 ("kallsyms: support "big" kernel symbols")
Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com>
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20241011143853.3022643-1-zhengyejian@huaweicloud.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4dffc9bbff upstream.
The original implementation of memcpy_sglist() was broken because it
didn't handle scatterlists that describe exactly the same memory, which
is a case that many callers rely on. The current implementation is
broken too because it calls the skcipher_walk functions which can fail.
It ignores any errors from those functions.
Fix it by replacing it with a new implementation written from scratch.
It always succeeds. It's also a bit faster, since it avoids the
overhead of skcipher_walk. skcipher_walk includes a lot of
functionality (such as alignmask handling) that's irrelevant here.
Reported-by: Colin Ian King <coking@nvidia.com>
Closes: https://lore.kernel.org/r/20251114122620.111623-1-coking@nvidia.com
Fixes: 131bdceca1 ("crypto: scatterwalk - Add memcpy_sglist")
Fixes: 0f8d42bf12 ("crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82d2048102 upstream.
For years I wondered why the floppy driver does not just work on
sparc64, e.g:
root@SUNW_375_0066:# disktype /dev/fd0
disktype: Can't open /dev/fd0: No such device or address
[ 525.341906] disktype: attempt to access beyond end of device
fd0: rw=0, sector=0, nr_sectors = 16 limit=8
[ 525.341991] floppy: error 10 while reading block 0
Turns out floppy.c __floppy_read_block_0 tries to read one page for
the first test read to determine the disk size and thus fails if that
is greater than 4k. Adjust minimum MAX_DISK_SIZE to PAGE_SIZE to fix
floppy on sparc64 and likely all other PAGE_SIZE != 4KB configs.
Cc: stable@vger.kernel.org
Signed-off-by: René Rebe <rene@exactco.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
