This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-9-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-8-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-7-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-6-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-5-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-4-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Add fstat(), fstatat() and lstat(). All of them use the existing implementation
based on statx().
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-3-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The %m format can be used to format the current errno.
It is non-standard but supported by other commonly used libcs like glibc and
musl, so applications do rely on them.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-2-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-1-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The UAPI headers already provide definitions for these symbols.
Using them makes the code shorter, more robust and compatible with
applications using linux/poll.h directly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250430-poll-v1-2-44b5ceabdeee@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is the location regular userspace expects the definition.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250430-poll-v1-1-44b5ceabdeee@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Add nolibc support for m68k. Should be helpful for nommu where
linking libc can bloat even hello world to the point where you get
an OOM just trying to load it.
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Link: https://lore.kernel.org/r/20250426224738.284874-1-daniel@0x0f.com
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Inclusion of any nolibc header file should also bring all other headers.
On the other hand it should also be possible to include any nolibc header
files
in any order.
Currently this is implemented by including the catch-all nolibc.h after the
headers own definitions.
This is problematic if one nolibc header depends on another one.
The first header has to include the other one before defining any symbols.
That in turn will include the rest of nolibc while the current header has
not defined anything yet. If any other part of nolibc depends on
definitions from the current header, errors are encountered.
This is already the case today. Effectively nolibc can only be included in
the order of nolibc.h.
Restructure the way "nolibc.h" is included.
Move it to the beginning of the header files and before the include guards.
Now any header will behave exactly like "nolibc.h" while the include
guards prevent any duplicate definitions.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250424-nolibc-header-check-v1-2-011576b6ed6f@linutronix.de
Each nolibc header should be valid for inclusion irrespective of any
special ordering requirements.
Add a new make target, based on the old kbuild "make header_check" target
to validate this requirement.
For now the check fails, but the following commits will fix the issues.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250424-nolibc-header-check-v1-1-011576b6ed6f@linutronix.de
SBAT is a mechanism which improves SecureBoot revocations of UEFI binaries
by introducing a generation-based technique. Compromised or vulnerable UEFI
binaries can be prevented from booting by bumping the minimal required
generation for the specific component in the bootloader. More information
on the SBAT can be obtained here:
https://github.com/rhboot/shim/blob/main/SBAT.md
Upstream Linux kernel does not currently participate in any way in SBAT as
there's no existing policy in how SBAT generation number should be
defined. Keep the status quo and provide a mechanism for distro vendors and
anyone else who signs their kernel for SecureBoot to include their own SBAT
data. This leaves the decision on the policy to the vendor. Basically, each
distro implementing SecureBoot today, will have an option to inject their
own SBAT data during kernel build and before it gets signed by their
SecureBoot CA. Different distro do not need to agree on the common SBAT
component names or generation numbers as each distro ships its own 'shim'
with their own 'vendor_cert'/'vendor_db'
Implement support for embedding SBAT data for architectures using
zboot (arm64, loongarch, riscv). Put '.sbat' section in between '.data' and
'.text' as the former also covers '.bss' and thus must be the last one.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Adjust the enabling/disabling steps of the DP audio SDP splitting
according to a recent Bspec update. This moves the enabling to the audio
codec enable sequence after the transcoder is enabled and disables SDP
splitting explicitly during the audio disable sequence.
Bspec requires waiting for a vblank event after the transcoder is
enabled and before SDP splitting is enabled. There is no need for an
explicit wait for this, since after the transcoder is enabled this
vblank event is guaranteed to have happened via a flip done wait (see
intel_atomic_commit_tail() -> drm_atomic_helper_wait_for_flip_done()).
The bspec update is for LNL+ only, but the HW team clarified that this
has been always the intended sequence on all platforms and bspec will be
updated everywhere accordingly.
The way SDP splitting was originally enabled matched the version of
bspec at that time. Adding here the Fixes: line still, since this
change fixes a FIFO underrun on PTL during output enabling when DSC is
enabled.
Bspec: 49283, 68943
Fixes: 8853750dba ("drm/i915: Enable SDP split for DP2.0")
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250520142219.1688401-1-imre.deak@intel.com
The ROHM BD79100G is a 12-bit ADC which can be read over SPI. Device has
no MOSI pin. ADC results can be read from MISO by clocking in 16 bits.
The 4 leading bits will be zero, last 12 containig the data.
Device has only VCC supply pin, which acts also as a VFS, determining the
voltage for full 12-bits. Specifying it is mandatory.
This seems identical to the ti,ads7866.
Support ROHM BU79100G using ti,ads7866 as a fallback.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/4907a096eee1f54afae834213cf721b551382d4e.1747203712.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add Nuvoton NCT7201/NCT7202 system voltage monitor 12-bit ADC driver
NCT7201/NCT7202 supports up to 12 analog voltage monitor inputs and up
to 4 SMBus addresses by ADDR pin. Meanwhile, ALERT# hardware event pins
for independent alarm signals, and all the threshold values could be set
for system protection without any timing delay. It also supports reset
input RSTIN# to recover system from a fault condition.
Currently, only single-edge mode conversion and threshold events are
supported.
Signed-off-by: Eason Yang <j2anfernee@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250512083156.3300006-3-j2anfernee@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a binding specification for the Nuvoton NCT7201/NCT7202 up to 12-bit
ADCs with I2C interface.
Signed-off-by: Eason Yang <j2anfernee@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250512083156.3300006-2-j2anfernee@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for the DFRobot SEN0322 oxygen sensor.
To instantiate (assuming device is connected to I2C-2):
echo 'sen0322 0x73' > /sys/class/i2c-dev/i2c-2/device/new_device
To get the oxygen concentration (assuming device is iio:device0) multiply
the values read from:
/sys/bus/iio/devices/iio:device0/in_concentration_raw
/sys/bus/iio/devices/iio:device0/in_concentration_scale
Datasheet: https://wiki.dfrobot.com/Gravity_I2C_Oxygen_Sensor_SKU_SEN0322
Signed-off-by: Tóth János <gomba007@gmail.com>
Link: https://patch.msgid.link/20250506-iio-chemical-sen0322-v4-2-1465ac8dc190@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove kernel.h since it adds a lot of unnecessary dependencies.
Add specific headers to ensure all functions and macros used in the driver
are directly declared.
Suggested-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/1f7677d31a0165cb30d7eb3b4d613e1337937f9a.1746662899.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The variable ret is being assigned a return value and non-zero error
return paths are taken at all stages. At the end of the function ret
is always zero, so the ternary operator checking for zero ret is
redundant and can be replaced with just len instead.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507134502.254736-1-colin.i.king@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use IIO_DECLARE_BUFFER_WITH_TS() to declare the buffer that gets used
with iio_push_to_buffers_with_ts(). This makes the code a bit easier to
read and understand.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-7-4aee1b9f1b89@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use IIO_DECLARE_BUFFER_WITH_TS() to declare the buffer that gets used
with iio_push_to_buffers_with_ts(). This makes the code a bit easier to
read and understand.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-6-4aee1b9f1b89@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use IIO_DECLARE_DMA_BUFFER_WITH_TS() to declare the buffer that gets
used with iio_push_to_buffers_with_ts(). This makes the code a bit
easier to read and understand.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-5-4aee1b9f1b89@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Rename AD4695_MAX_CHANNELS to AD4695_MAX_VIN_CHANNELS. It has been a
point of confusion that this macro is only the voltage input channels
and not all channels.
Reviewed-by: Trevor Gamblin <tgamblin@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-4-4aee1b9f1b89@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use IIO_DECLARE_DMA_BUFFER_WITH_TS() to declare the buffer that gets
used with iio_push_to_buffers_with_ts(). This makes the code a bit
easier to read and understand.
Reviewed-by: Trevor Gamblin <tgamblin@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-3-4aee1b9f1b89@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add new macros to help with the common case of declaring a buffer that
is safe to use with iio_push_to_buffers_with_ts(). This is not trivial
to do correctly because of the alignment requirements of the timestamp.
This will make it easier for both authors and reviewers.
To avoid double __align() attributes in cases where we also need DMA
alignment, add a 2nd variant IIO_DECLARE_DMA_BUFFER_WITH_TS().
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-2-4aee1b9f1b89@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a condition to ensure that IIO_DMA_MINALIGN is at least 8 bytes.
On some 32-bit architectures, IIO_DMA_MINALIGN is 4. In many cases,
drivers are using this alignment for buffers that include a 64-bit
timestamp that is used with iio_push_to_buffers_with_ts(), which expects
the timestamp to be aligned to 8 bytes. To handle this, we can just make
IIO_DMA_MINALIGN at least 8 bytes.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-1-4aee1b9f1b89@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove setting bits_per_word = 8 from the zpa2326 driver. This is the
default value for SPI transfers, so it is not necessary to explicitly
set it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-14-341f85fcfe11@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove setting bits_per_word = 8 from the ms5611 driver. This is the
default value for SPI transfers, so it is not necessary to explicitly
set it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-13-341f85fcfe11@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove setting bits_per_word = 8 from the bmp280 driver. This is the
default value for SPI transfers, so it is not necessary to explicitly
set it.
Since no other SPI settings are changed, we can also remove the call to
spi_setup().
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-12-341f85fcfe11@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove setting bits_per_word = 8 from the rm3100 driver. This is the
default value for SPI transfers, so it is not necessary to explicitly
set it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-11-341f85fcfe11@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove setting bits_per_word = 8 from the hmc5843 driver. This is the
default value for SPI transfers, so it is not necessary to explicitly
set it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-10-341f85fcfe11@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove setting bits_per_word = 8 from the adis driver. This is the
default value for SPI transfers, so it is not necessary to explicitly
set it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-9-341f85fcfe11@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove setting bits_per_word = 8 from the adxrs450 driver. This is the
default value for SPI transfers, so it is not necessary to explicitly
set it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-8-341f85fcfe11@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove setting bits_per_word = 8 from the ltc2688 driver. This is the
default value for SPI transfers, so it is not necessary to explicitly
set it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-7-341f85fcfe11@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove setting bits_per_word = 8 from the ad5791 driver. This is the
default value for SPI transfers, so it is not necessary to explicitly
set it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-6-341f85fcfe11@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove setting bits_per_word = 8 from the ad5766 driver. This is the
default value for SPI transfers, so it is not necessary to explicitly
set it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-5-341f85fcfe11@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove setting bits_per_word = 8 from the ad5761 driver. This is the
default value for SPI transfers, so it is not necessary to explicitly
set it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-4-341f85fcfe11@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove setting bits_per_word = 8 from the bme680 driver. This is the
default value for SPI transfers, so it is not necessary to explicitly
set it.
Since no other SPI settings are changed, we can also remove the call to
spi_setup().
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-3-341f85fcfe11@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove setting bits_per_word = 8 from the ti-tsc2046 driver. This is the
default value for SPI transfers, so it is not necessary to explicitly
set it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-2-341f85fcfe11@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove setting bits_per_word = 8 from the ad4030 driver. This is the
default value for SPI transfers, so it is not necessary to explicitly
set it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-1-341f85fcfe11@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
