Use TAP output for easier automated testing.
Suggested-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20250517151455.1065363-3-bigeasy@linutronix.de
Use TAP output for easier automated testing.
Suggested-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20250517151455.1065363-2-bigeasy@linutronix.de
The commit dfa0a574cb ("sched/uclamg: Handle delayed dequeue")
has add the sched_delayed check to prevent double uclamp_dec/inc.
However, it put the uclamp_rq_inc() after enqueue_task().
This may lead to the following issues:
When a task with uclamp goes through enqueue_task() and could trigger
cpufreq update, its uclamp won't even be considered in the cpufreq
update. It is only after enqueue will the uclamp be added to rq
buckets, and cpufreq will only pick it up at the next update.
This could cause a delay in frequency updating. It may affect
the performance(uclamp_min > 0) or power(uclamp_max < 1024).
So, just like util_est, put the uclamp_rq_inc() before enqueue_task().
And as for the sched_delayed_task, same as util_est, using the
sched_delayed flag to prevent inc the sched_delayed_task's uclamp,
using the ENQUEUE_DELAYED flag to allow inc the sched_delayed_task's uclamp
which is being woken up.
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20250417043457.10632-3-xuewen.yan@unisoc.com
To prevent double enqueue/dequeue of the util-est for sched_delayed tasks,
commit 729288bc68 ("kernel/sched: Fix util_est accounting for DELAY_DEQUEUE")
added the corresponding check. This check excludes double en/dequeue during
task migration and priority changes.
In fact, these conditions can be simplified.
For util_est_dequeue, we know that sched_delayed flag is set in dequeue_entity.
When the task is sleeping, we need to call util_est_dequeue to subtract
util-est from the cfs_rq. At this point, sched_delayed has not yet been set.
If we find that sched_delayed is already set, it indicates that this task
has already called dequeue_task_fair once. In this case, there is no need to
call util_est_dequeue again. Therefore, simply checking the sched_delayed flag
should be sufficient to prevent unnecessary util_est updates during the dequeue.
For util_est_enqueue, our goal is to add the util_est to the cfs_rq
when task enqueue. However, we don't want to add the util_est of a
sched_delayed task to the cfs_rq because the task is sleeping.
Therefore, we can exclude the util_est_enqueue for sched_delayed tasks
by checking the sched_delayed flag. However, when waking up a delayed task,
the sched_delayed flag is cleared after util_est_enqueue. As a result,
if we only check the sched_delayed flag, we would miss the util_est_enqueue.
Since waking up a sched_delayed task calls enqueue_task with the ENQUEUE_DELAYED flag,
we can determine whether to call util_est_enqueue by checking if the
enqueue_flag contains ENQUEUE_DELAYED.
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20250417043457.10632-2-xuewen.yan@unisoc.com
Delayed dequeued feature keeps a sleeping task enqueued until its
lag has elapsed. As a result, it stays also visible in rq->nr_running.
So when in wake_affine_idle(), we should use the real running-tasks
in rq to check whether we should place the wake-up task to
current cpu.
On the other hand, add a helper function to return the nr-delayed.
Fixes: 152e11f6df ("sched/fair: Implement delayed dequeue")
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-and-tested-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250303105241.17251-2-xuewen.yan@unisoc.com
Remove all unnecessary braces for single-statement blocks in
`os_dep/recv_linux.c` to conform to code style rules.
Warnings reported by checkpatch.pl:
* WARNING: braces {} are not necessary for single statement blocks
* WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: David Tadokoro <davidbtadokoro@usp.br>
Link: https://lore.kernel.org/r/20250521075831.485199-1-davidbtadokoro@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GPIB secondary addresses have valid values between 0 and 31
inclusive. The Make Secondary Address function MSA, used to form
the protocol byte, was using the gpib_address_restrict function
erroneously restricting the address range to 0 through 30.
Remove the call to gpib_address_restrict and simply trim the
address to 5 bits.
Fixes: 2da03e7e31 ("staging: gpib: Add user api include files")
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250520155100.5808-1-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When gpib_user.h was renamed to gpio.h the include guard name was
not changed accordingly.
Change the include guard name to correspond with the file name
and cleanup the comments after the #endif.
Fixes: c7184cbf55 ("staging: gpib: Rename common include file")
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250509113014.9105-1-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This addresses a warning produced by make W=1 with the configuration
parameter CONFIG_GPIB_PCMCIA=y
ines/ines_gpib.c:1115:28: warning: variable 'dev' set but not used [-Wunused-but-set-variable]
Remove the declaration and assignment of the unused variable.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250502072150.32714-4-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many of this driver's entry points were unecessarily not declared
static.
Remove the declarations from the include file.
Make the declarations static in the .c file.
Remove an uneccessary forward declaration in the .c file.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250502072150.32714-3-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCMCIA config identifier in the ines_exit_module function
was never changed because it was misspelled in the original commit.
Update the config parameter to use the correct identifier from
gpib/Kconfig
Fixes: bb1bd92fa0 ("staging: gpib: Add ines GPIB driver")
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250502072150.32714-2-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The console dimension and cursor position are available through the
/dev/vcsa interface already. However the /dev/vcsa header format uses
single-byte fields therefore those values are clamped to 255.
As surprizing as this may seem, some people do use 240-column 67-row
screens (a 1920x1080 monitor with 8x16 pixel fonts) which is getting
close to the limit. Monitors with higher resolution are not uncommon
these days (3840x2160 producing a 480x135 character display) and it is
just a matter of time before someone with, say, a braille display using
the Linux VT console and BRLTTY on such a screen reports a bug about
missing and oddly misaligned screen content.
Let's add VT_GETCONSIZECSRPOS for the retrieval of console size and cursor
position without byte-sized limitations. The actual console size limit as
encoded in vt.c is 32767x32767 so using a short here is appropriate. Then
this can be used to get the cursor position when /dev/vcsa reports 255.
The screen dimension may already be obtained using TIOCGWINSZ and adding
the same information to VT_GETCONSIZECSRPOS might be redundant. However
applications that care about cursor position also care about display
size and having 2 separate system calls to obtain them separately is
wasteful. Also, the cursor position can be queried by writing "\e[6n" to
a tty and reading back the result but that may be done only by the actual
application using that tty and not a sideline observer.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250520171851.1219676-3-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is comprised of 3 aspects:
- Take note of when applications advertise bracketed paste support via
"\e[?2004h" and "\e[?2004l".
- Insert bracketed paste markers ("\e[200~" and "\e[201~") around pasted
content in paste_selection() when bracketed paste is active.
- Add TIOCL_GETBRACKETEDPASTE to return bracketed paste status so user
space daemons implementing cut-and-paste functionality (e.g. gpm,
BRLTTY) may know when to insert bracketed paste markers.
Link: https://en.wikipedia.org/wiki/Bracketed-paste
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250520171851.1219676-2-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the new API for allocating DRM bridges.
The devm lifetime management of this driver is peculiar. The underlying
device for the panel_bridge is the panel, and the devm lifetime is tied the
panel device (panel->dev). However the panel_bridge allocation is not
performed by the panel driver, but rather by a separate entity (typically
the previous bridge in the encoder chain).
Thus when that separate entity is destroyed, the panel_bridge is not
removed automatically by devm, so it is rather done explicitly by calling
drm_panel_bridge_remove(). This is the function that does devm_kfree() the
panel_bridge in current code, so update it as well to put the bridge
reference instead.
This is a temporary solution until the panel lifetime is reworked, which
should make this workaround unnecessary, so add a comment to clarify that.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-21-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Bridges obtained via devm_drm_bridge_alloc(dev, ...) will be put when the
requesting device (@dev) is removed.
However drivers which obtained them may need to put the obtained reference
explicitly. One such case is if they bind the devm removal action to a
different device than the one implemented by the driver itself and which
might be removed at a different time, such as bridge/panel.c.
Add devm_drm_put_bridge() to manually release a devm-obtained bridge in
such cases.
This function is considered only a temporary workaround until the panel
bridge is reworked and should be removed afterwards.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-20-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This is the new API for allocating DRM bridges.
This driver has a peculiar structure. zynqmp_dpsub.c is the actual driver,
which delegates to a submodule (zynqmp_dp.c) the allocation of a
sub-structure embedding the drm_bridge and its initialization, however it
does not delegate the drm_bridge_add(). Hence, following carefully the code
flow, it is correct to change the allocation function and .funcs assignment
in the submodule, while the drm_bridge_add() is not in that submodule.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-17-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This is the new API for allocating DRM bridges.
This driver allocates the DRM bridge separately from the main driver
private struct, which prevents using the new devm_drm_bridge_alloc()
API. Simplify the code by replacing the struct drm_bridge pointer with an
embedded struct drm_bridge inside the private struct, to make use of the
new API with the same code flow.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-16-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This is the new API for allocating DRM bridges.
Switching from a non-devm to a devm allocation allows removing the kfree()
in the remove function and in the probe error management code, and as a
consequence to simplify the code flow by removing now unnecessary gotos.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-13-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This is the new API for allocating DRM bridges.
Switching from a non-devm to a devm allocation allows removing the kfree()
in the remove function and in the probe error management code, and as a
consequence to simplify the code flow by removing now unnecessary gotos.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-12-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This is the new API for allocating DRM bridges.
Switching from a non-devm to a devm allocation allows removing the kfree()
in the remove function and in the probe error management code, and as a
consequence to simplify the code flow by removing now unnecessary gotos.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-11-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This is the new API for allocating DRM bridges.
Switching from a non-devm to a devm allocation allows removing the kfree()
in the remove function and in the probe error management code, and as a
consequence to simplify the code flow by removing now unnecessary gotos.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-10-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
They are listed amon those cmd values that "treat 'arg' as an integer"
which is wrong. They should instead fall into the default case. Probably
nobody ever relied on that code since 2009 but still.
Fixes: e92166517e ("tty: handle VT specific compat ioctls in vt driver")
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/pr214s15-36r8-6732-2pop-159nq85o48r7@syhkavp.arg
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The generated table maps complex characters to their simpler fallback
forms for a terminal display when corresponding glyphs are unavailable.
A page-based approach is used to reduce compiled binary footprint.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250507141535.40655-6-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The generated table maps complex characters to their simpler fallback
forms for a terminal display when corresponding glyphs are unavailable.
This includes diacritics, symbols as well as many drawing characters.
Fallback characters aren't perfect replacements, obviously. But they are
still far more useful than a bunch of squared question marks.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250507141535.40655-5-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
And to do so we ensure the Unicode screen buffer is initialized when
double-width characters are encountered.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250507141535.40655-3-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The in_range() helper accepts a start and a length, not a start and
an end.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250507141535.40655-2-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
