[ Upstream commit a8b38d1985 ]
The new platform uses the QCA2066 chip along with a new board ID, which
requires a dedicated firmware file to ensure proper initialization.
Without this entry, the driver cannot locate and load the correct
firmware, resulting in Bluetooth bring-up failure.
This patch adds a new entry to the firmware table for QCA2066 so that
the driver can correctly identify the board ID and load the appropriate
firmware from 'qca/QCA2066/' in the linux-firmware repository.
Signed-off-by: Shuai Zhang <quic_shuaz@quicinc.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 991f8a79db ]
ksmbd maintains delete-on-close and pending-delete state in
ksmbd_inode->m_flags. In vfs_cache.c this field is accessed under
inconsistent locking: some paths read and modify m_flags under
ci->m_lock while others do so without taking the lock at all.
Examples:
- ksmbd_query_inode_status() and __ksmbd_inode_close() use
ci->m_lock when checking or updating m_flags.
- ksmbd_inode_pending_delete(), ksmbd_set_inode_pending_delete(),
ksmbd_clear_inode_pending_delete() and ksmbd_fd_set_delete_on_close()
used to read and modify m_flags without ci->m_lock.
This creates a potential data race on m_flags when multiple threads
open, close and delete the same file concurrently. In the worst case
delete-on-close and pending-delete bits can be lost or observed in an
inconsistent state, leading to confusing delete semantics (files that
stay on disk after delete-on-close, or files that disappear while still
in use).
Fix it by:
- Making ksmbd_query_inode_status() look at m_flags under ci->m_lock
after dropping inode_hash_lock.
- Adding ci->m_lock protection to all helpers that read or modify
m_flags (ksmbd_inode_pending_delete(), ksmbd_set_inode_pending_delete(),
ksmbd_clear_inode_pending_delete(), ksmbd_fd_set_delete_on_close()).
- Keeping the existing ci->m_lock protection in __ksmbd_inode_close(),
and moving the actual unlink/xattr removal outside the lock.
This unifies the locking around m_flags and removes the data race while
preserving the existing delete-on-close behaviour.
Reported-by: Qianchang Zhao <pioooooooooip@gmail.com>
Reported-by: Zhitong Liu <liuzhitong1993@gmail.com>
Signed-off-by: Qianchang Zhao <pioooooooooip@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b39a1833cc ]
Under high concurrency, A tree-connection object (tcon) is freed on
a disconnect path while another path still holds a reference and later
executes *_put()/write on it.
Reported-by: Qianchang Zhao <pioooooooooip@gmail.com>
Reported-by: Zhitong Liu <liuzhitong1993@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 269df046c1 ]
__process_request() will not print error messages if smb2_ioctl()
always returns 0.
Fix this by returning the correct value at the end of function.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dff1fb6d8b ]
Commit e4a8b5481c ("gfs2: Switch to wait_event in gfs2_quotad") broke
cyclic statfs syncing, so the numbers reported by "df" could easily get
completely out of sync with reality. Fix this by reverting part of
commit e4a8b5481c for now.
A follow-up commit will clean this code up later.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64c10ed927 ]
When a node tries to delete an inode, it first requests exclusive access
to the iopen glock. This triggers demote requests on all remote nodes
currently holding the iopen glock. To satisfy those requests, the
remote nodes evict the inode in question, or they poke the corresponding
inode glock to signal that the inode is still in active use.
This behavior doesn't depend on whether or not a filesystem is
read-only, so remove the incorrect read-only check.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f04ee216b ]
The xfstests' test-case generic/101 leaves HFS+ volume
in corrupted state:
sudo ./check generic/101
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.17.0-rc1+ #4 SMP PREEMPT_DYNAMIC Wed Oct 1 15:02:44 PDT 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/101 _check_generic_filesystem: filesystem on /dev/loop51 is inconsistent
(see XFSTESTS-2/xfstests-dev/results//generic/101.full for details)
Ran: generic/101
Failures: generic/101
Failed 1 of 1 tests
sudo fsck.hfsplus -d /dev/loop51
** /dev/loop51
Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
Executing fsck_hfs (version 540.1-Linux).
** Checking non-journaled HFS Plus Volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
Invalid volume free block count
(It should be 2614350 instead of 2614382)
Verify Status: VIStat = 0x8000, ABTStat = 0x0000 EBTStat = 0x0000
CBTStat = 0x0000 CatStat = 0x00000000
** Repairing volume.
** Rechecking volume.
** Checking non-journaled HFS Plus Volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume untitled was repaired successfully.
This test executes such steps: "Test that if we truncate a file
to a smaller size, then truncate it to its original size or
a larger size, then fsyncing it and a power failure happens,
the file will have the range [first_truncate_size, last_size[ with
all bytes having a value of 0x00 if we read it the next time
the filesystem is mounted.".
HFS+ keeps volume's free block count in the superblock.
However, hfsplus_file_fsync() doesn't store superblock's
content. As a result, superblock contains not correct
value of free blocks if a power failure happens.
This patch adds functionality of saving superblock's
content during hfsplus_file_fsync() call.
sudo ./check generic/101
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.18.0-rc3+ #96 SMP PREEMPT_DYNAMIC Wed Nov 19 12:47:37 PST 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/101 32s ... 30s
Ran: generic/101
Passed all 1 tests
sudo fsck.hfsplus -d /dev/loop51
** /dev/loop51
Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
Executing fsck_hfs (version 540.1-Linux).
** Checking non-journaled HFS Plus Volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume untitled appears to be OK.
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20251119223219.1824434-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54df8b80cc ]
[BUG]
When a scrub failed immediately without any byte scrubbed, the returned
btrfs_scrub_progress::last_physical will always be 0, even if there is a
non-zero @start passed into btrfs_scrub_dev() for resume cases.
This will reset the progress and make later scrub resume start from the
beginning.
[CAUSE]
The function btrfs_scrub_dev() accepts a @progress parameter to copy its
updated progress to the caller, there are cases where we either don't
touch progress::last_physical at all or copy 0 into last_physical:
- last_physical not updated at all
If some error happened before scrubbing any super block or chunk, we
will not copy the progress, leaving the @last_physical untouched.
E.g. failed to allocate @sctx, scrubbing a missing device or even
there is already a running scrub and so on.
All those cases won't touch @progress at all, resulting the
last_physical untouched and will be left as 0 for most cases.
- Error out before scrubbing any bytes
In those case we allocated @sctx, and sctx->stat.last_physical is all
zero (initialized by kvzalloc()).
Unfortunately some critical errors happened during
scrub_enumerate_chunks() or scrub_supers() before any stripe is really
scrubbed.
In that case although we will copy sctx->stat back to @progress, since
no byte is really scrubbed, last_physical will be overwritten to 0.
[FIX]
Make sure the parameter @progress always has its @last_physical member
updated to @start parameter inside btrfs_scrub_dev().
At the very beginning of the function, set @progress->last_physical to
@start, so that even if we error out without doing progress copying,
last_physical is still at @start.
Then after we got @sctx allocated, set sctx->stat.last_physical to
@start, this will make sure even if we didn't get any byte scrubbed, at
the progress copying stage the @last_physical is not left as zero.
This should resolve the resume progress reset problem.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8e5a110c0 ]
The Acer A1 840 tablet contains quite generic names in the sys_vendor and
product_name DMI strings, without this patch brcmfmac will try to load:
brcmfmac43340-sdio.Insyde-BayTrail.txt as nvram file which is a bit
too generic.
Add a DMI quirk so that a unique and clearly identifiable nvram file name
is used on the Acer A1 840 tablet.
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20251103100314.353826-1-hansg@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 066f417be5 ]
Set the MT76_STATE_MCU_RUNNING bit only after mt7921_load_clc()
has successfully completed. Previously, the MCU_RUNNING state
was set before loading CLC, which could cause conflict between
chip mcu_init retry and mac_reset flow, result in chip init fail
and chip abnormal status. By moving the state set after CLC load,
firmware initialization becomes robust and resolves init fail issue.
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Reviewed-by: druth@chromium.org
Link: https://patch.msgid.link/19ec8e4465142e774f17801025accd0ae2214092.1763465933.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a27b73943 ]
When changing the interface type, all activity on the interface has
to be stopped first. This was done independent of existing code in
cfg80211_leave(), so didn't handle e.g. background radar detection.
Use cfg80211_leave() to handle it the same way.
Note that cfg80211_leave() behaves slightly differently for IBSS in
wireless extensions, it won't send an event in that case. We could
handle that, but since nl80211 was used to change the type, IBSS is
rare, and wext is already a corner case, it doesn't seem worth it.
Link: https://patch.msgid.link/20251121174021.922ef48ce007.I970c8514252ef8a864a7fbdab9591b71031dee03@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f33477b9a ]
If an interface is set down or, per the previous patch, changes
type, radar detection for it should be cancelled. This is done
for AP mode in mac80211 (somewhat needlessly, since cfg80211 can
do it, but didn't until now), but wasn't handled for mesh, so if
radar detection was started and then the interface set down or
its type switched (the latter sometimes happning in the hwsim
test 'mesh_peer_connected_dfs'), radar detection would be around
with the interface unknown to the driver, later leading to some
warnings around chanctx usage.
Link: https://patch.msgid.link/20251121174021.290120e419e3.I2a5650c9062e29c988992dd8ce0d8eb570d23267@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5511ba3de4 ]
Flip the response rate subchannel. It was backwards, causing low
speeds when using 40 MHz channel width. "iw dev ... station dump"
showed a low RX rate, 11M or less.
Also fix the channel width field of RF6052_REG_MODE_AG.
Tested only with RTL8192CU, but these settings are identical for
RTL8723AU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/1f46571d-855b-43e1-8bfc-abacceb96043@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b2ae190ea ]
Ensure fsync() returns -EIO when the ntfs3 filesystem is in forced
shutdown, instead of silently succeeding via generic_file_fsync().
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24e17a29cf ]
The xfstests' test-case generic/073 leaves HFS+ volume
in corrupted state:
sudo ./check generic/073
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.17.0-rc1+ #4 SMP PREEMPT_DYNAMIC Wed Oct 1 15:02:44 PDT 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/073 _check_generic_filesystem: filesystem on /dev/loop51 is inconsistent
(see XFSTESTS-2/xfstests-dev/results//generic/073.full for details)
Ran: generic/073
Failures: generic/073
Failed 1 of 1 tests
sudo fsck.hfsplus -d /dev/loop51
** /dev/loop51
Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
Executing fsck_hfs (version 540.1-Linux).
** Checking non-journaled HFS Plus Volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
Invalid directory item count
(It should be 1 instead of 0)
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
Verify Status: VIStat = 0x0000, ABTStat = 0x0000 EBTStat = 0x0000
CBTStat = 0x0000 CatStat = 0x00004000
** Repairing volume.
** Rechecking volume.
** Checking non-journaled HFS Plus Volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume untitled was repaired successfully.
The test is doing these steps on final phase:
mv $SCRATCH_MNT/testdir_1/bar $SCRATCH_MNT/testdir_2/bar
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir_1
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
So, we move file bar from testdir_1 into testdir_2 folder. It means that HFS+
logic decrements the number of entries in testdir_1 and increments number of
entries in testdir_2. Finally, we do fsync only for testdir_1 and foo but not
for testdir_2. As a result, this is the reason why fsck.hfsplus detects the
volume corruption afterwards.
This patch fixes the issue by means of adding the
hfsplus_cat_write_inode() call for old_dir and new_dir in
hfsplus_rename() after the successful ending of
hfsplus_rename_cat(). This method makes modification of in-core
inode objects for old_dir and new_dir but it doesn't save these
modifications in Catalog File's entries. It was expected that
hfsplus_write_inode() will save these modifications afterwards.
However, because generic/073 does fsync only for testdir_1 and foo
then testdir_2 modification hasn't beed saved into Catalog File's
entry and it was flushed without this modification. And it was
detected by fsck.hfsplus. Now, hfsplus_rename() stores in Catalog
File all modified entries and correct state of Catalog File will
be flushed during hfsplus_file_fsync() call. Finally, it makes
fsck.hfsplus happy.
sudo ./check generic/073
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.18.0-rc3+ #93 SMP PREEMPT_DYNAMIC Wed Nov 12 14:37:49 PST 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/073 32s ... 32s
Ran: generic/073
Passed all 1 tests
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20251112232522.814038-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 152af11428 ]
When sync() and link() are called concurrently, both threads may
enter hfs_bnode_find() without finding the node in the hash table
and proceed to create it.
Thread A:
hfsplus_write_inode()
-> hfsplus_write_system_inode()
-> hfs_btree_write()
-> hfs_bnode_find(tree, 0)
-> __hfs_bnode_create(tree, 0)
Thread B:
hfsplus_create_cat()
-> hfs_brec_insert()
-> hfs_bnode_split()
-> hfs_bmap_alloc()
-> hfs_bnode_find(tree, 0)
-> __hfs_bnode_create(tree, 0)
In this case, thread A creates the bnode, sets refcnt=1, and hashes it.
Thread B also tries to create the same bnode, notices it has already
been inserted, drops its own instance, and uses the hashed one without
getting the node.
```
node2 = hfs_bnode_findhash(tree, cnid);
if (!node2) { <- Thread A
hash = hfs_bnode_hash(cnid);
node->next_hash = tree->node_hash[hash];
tree->node_hash[hash] = node;
tree->node_hash_cnt++;
} else { <- Thread B
spin_unlock(&tree->hash_lock);
kfree(node);
wait_event(node2->lock_wq,
!test_bit(HFS_BNODE_NEW, &node2->flags));
return node2;
}
```
However, hfs_bnode_find() requires each call to take a reference.
Here both threads end up setting refcnt=1. When they later put the node,
this triggers:
BUG_ON(!atomic_read(&node->refcnt))
In this scenario, Thread B in fact finds the node in the hash table
rather than creating a new one, and thus must take a reference.
Fix this by calling hfs_bnode_get() when reusing a bnode newly created by
another thread to ensure the refcount is updated correctly.
A similar bug was fixed in HFS long ago in commit
a9dc087fd3 ("fix missing hfs_bnode_get() in __hfs_bnode_create")
but the same issue remained in HFS+ until now.
Reported-by: syzbot+005d2a9ecd9fbf525f6a@syzkaller.appspotmail.com
Signed-off-by: Yang Chenzhi <yang.chenzhi@vivo.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20250829093912.611853-1-yang.chenzhi@vivo.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed490f36f4 ]
The xfstests' test-case generic/070 leaves HFS+ volume
in corrupted state:
sudo ./check generic/070
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.17.0-rc1+ #4 SMP PREEMPT_DYNAMIC Wed Oct 1 15:02:44 PDT 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/070 _check_generic_filesystem: filesystem on /dev/loop50 is inconsistent
(see xfstests-dev/results//generic/070.full for details)
Ran: generic/070
Failures: generic/070
Failed 1 of 1 tests
sudo fsck.hfsplus -d /dev/loop50
** /dev/loop50
Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
Executing fsck_hfs (version 540.1-Linux).
** Checking non-journaled HFS Plus Volume.
The volume name is test
** Checking extents overflow file.
Unused node is not erased (node = 1)
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
Verify Status: VIStat = 0x0000, ABTStat = 0x0000 EBTStat = 0x0004
CBTStat = 0x0000 CatStat = 0x00000000
** Repairing volume.
** Rechecking volume.
** Checking non-journaled HFS Plus Volume.
The volume name is test
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume test was repaired successfully.
It is possible to see that fsck.hfsplus detected not
erased and unused node for the case of extents overflow file.
The HFS+ logic has special method that defines if the node
should be erased:
bool hfs_bnode_need_zeroout(struct hfs_btree *tree)
{
struct super_block *sb = tree->inode->i_sb;
struct hfsplus_sb_info *sbi = HFSPLUS_SB(sb);
const u32 volume_attr = be32_to_cpu(sbi->s_vhdr->attributes);
return tree->cnid == HFSPLUS_CAT_CNID &&
volume_attr & HFSPLUS_VOL_UNUSED_NODE_FIX;
}
However, it is possible to see that this method works
only for the case of catalog file. But debugging of the issue
has shown that HFSPLUS_VOL_UNUSED_NODE_FIX attribute has been
requested for the extents overflow file too:
catalog file
kernel: hfsplus: node 4, num_recs 0, flags 0x10
kernel: hfsplus: tree->cnid 4, volume_attr 0x80000800
extents overflow file
kernel: hfsplus: node 1, num_recs 0, flags 0x10
kernel: hfsplus: tree->cnid 3, volume_attr 0x80000800
This patch modifies the hfs_bnode_need_zeroout() by checking
only volume_attr but not the b-tree ID because node zeroing
can be requested for all HFS+ b-tree types.
sudo ./check generic/070
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.18.0-rc3+ #79 SMP PREEMPT_DYNAMIC Fri Oct 31 16:07:42 PDT 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/070 33s ... 34s
Ran: generic/070
Passed all 1 tests
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20251101001229.247432-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1693a7d5a ]
When mounting, sb->s_blocksize is used to read the boot_block without
being defined or validated. Set a dummy blocksize before attempting to
read the boot_block.
The issue can be triggered with the following syz reproducer:
mkdirat(0xffffffffffffff9c, &(0x7f0000000080)='./file1\x00', 0x0)
r4 = openat$nullb(0xffffffffffffff9c, &(0x7f0000000040), 0x121403, 0x0)
ioctl$FS_IOC_SETFLAGS(r4, 0x40081271, &(0x7f0000000980)=0x4000)
mount(&(0x7f0000000140)=@nullb, &(0x7f0000000040)='./cgroup\x00',
&(0x7f0000000000)='ntfs3\x00', 0x2208004, 0x0)
syz_clone(0x88200200, 0x0, 0x0, 0x0, 0x0, 0x0)
Here, the ioctl sets the bdev block size to 16384. During mount,
get_tree_bdev_flags() calls sb_set_blocksize(sb, block_size(bdev)),
but since block_size(bdev) > PAGE_SIZE, sb_set_blocksize() leaves
sb->s_blocksize at zero.
Later, ntfs_init_from_boot() attempts to read the boot_block while
sb->s_blocksize is still zero, which triggers the bug.
Reported-by: syzbot+f4f84b57a01d6b8364ad@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f4f84b57a01d6b8364ad
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
[almaz.alexandrovich@paragon-software.com: changed comment style, added
return value handling]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af61da281f ]
When building out-of-tree modules with CONFIG_MODULE_SIG_FORCE=y,
module signing fails because the private key path uses $(srctree)
while the public key path uses $(objtree). Since signing keys are
generated in the build directory during kernel compilation, both
paths should use $(objtree) for consistency.
This causes SSL errors like:
SSL error:02001002:system library:fopen:No such file or directory
sign-file: /kernel-src/certs/signing_key.pem
The issue occurs because:
- sig-key uses: $(srctree)/certs/signing_key.pem (source tree)
- cmd_sign uses: $(objtree)/certs/signing_key.x509 (build tree)
But both keys are generated in $(objtree) during the build.
This complements commit 25ff08aa43 ("kbuild: Fix signing issue for
external modules") which fixed the scripts path and public key path,
but missed the private key path inconsistency.
Fixes out-of-tree module signing for configurations with separate
source and build directories (e.g., O=/kernel-out).
Signed-off-by: Mikhail Malyshev <mike.malyshev@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251015163452.3754286-1-mike.malyshev@gmail.com
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5180138604 ]
Before it used an unsigned 64-bit type, which prevented proper handling
of timestamps earlier than 1970-01-01. Switch to a signed 64-bit type to
support pre-epoch timestamps. The issue was caught by xfstests.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fc6290117 ]
PCI device 0x115A is similar to pspv5, except it doesn't have platform
access mailbox support.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 139560e8b9 ]
When there is only one function of the same name, old_sympos of 0 and 1
are logically identical. Match them in klp_find_func().
This is to avoid a corner case with different toolchain behavior.
In this specific issue, two versions of kpatch-build were used to
build livepatch for the same kernel. One assigns old_sympos == 0 for
unique local functions, the other assigns old_sympos == 1 for unique
local functions. Both versions work fine by themselves. (PS: This
behavior change was introduced in a downstream version of kpatch-build.
This change does not exist in upstream kpatch-build.)
However, during livepatch upgrade (with the replace flag set) from a
patch built with one version of kpatch-build to the same fix built with
the other version of kpatch-build, livepatching fails with errors like:
[ 14.218706] sysfs: cannot create duplicate filename 'xxx/somefunc,1'
...
[ 14.219466] Call Trace:
[ 14.219468] <TASK>
[ 14.219469] dump_stack_lvl+0x47/0x60
[ 14.219474] sysfs_warn_dup.cold+0x17/0x27
[ 14.219476] sysfs_create_dir_ns+0x95/0xb0
[ 14.219479] kobject_add_internal+0x9e/0x260
[ 14.219483] kobject_add+0x68/0x80
[ 14.219485] ? kstrdup+0x3c/0xa0
[ 14.219486] klp_enable_patch+0x320/0x830
[ 14.219488] patch_init+0x443/0x1000 [ccc_0_6]
[ 14.219491] ? 0xffffffffa05eb000
[ 14.219492] do_one_initcall+0x2e/0x190
[ 14.219494] do_init_module+0x67/0x270
[ 14.219496] init_module_from_file+0x75/0xa0
[ 14.219499] idempotent_init_module+0x15a/0x240
[ 14.219501] __x64_sys_finit_module+0x61/0xc0
[ 14.219503] do_syscall_64+0x5b/0x160
[ 14.219505] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 14.219507] RIP: 0033:0x7f545a4bd96d
...
[ 14.219516] kobject: kobject_add_internal failed for somefunc,1 with
-EEXIST, don't try to register things with the same name ...
This happens because klp_find_func() thinks somefunc with old_sympos==0
is not the same as somefunc with old_sympos==1, and klp_add_object_nops
adds another xxx/func,1 to the list of functions to patch.
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
[pmladek@suse.com: Fixed some typos.]
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ade9b9576e ]
When running kernel-doc over multiple documents, it emits
one error message per file with is not what we want:
$ python3.6 scripts/kernel-doc.py . --none
...
Warning: ./include/trace/events/swiotlb.h:0 Python 3.7 or later is required for correct results
Warning: ./include/trace/events/iommu.h:0 Python 3.7 or later is required for correct results
Warning: ./include/trace/events/sock.h:0 Python 3.7 or later is required for correct results
...
Change the logic to warn it only once at the library:
$ python3.6 scripts/kernel-doc.py . --none
Warning: Python 3.7 or later is required for correct results
Warning: ./include/cxl/features.h:0 Python 3.7 or later is required for correct results
When running from command line, it warns twice, but that sounds
ok.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <68e54cf8b1201d1f683aad9bc710a99421910356.1758196090.git.mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca8313fd83 ]
Fix section mismatch warning reported by modpost:
.text:early_parse_cmdline() -> .init.data:boot_command_line
The function early_parse_cmdline() is only called during init and accesses
init data, so mark it __init to match its usage.
[ bp: This happens only when the toolchain fails to inline the function and
I haven't been able to reproduce it with any toolchain I'm using. Patch is
obviously correct regardless. ]
Signed-off-by: Yu Peng <pengyu@kylinos.cn>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/all/20251030123757.1410904-1-pengyu@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07d8157012 ]
On virtualized PowerPC (pseries) systems, where only one polling state
(Snooze) and one deep state (CEDE) are available, selecting CEDE when
the predicted idle duration is less than the target residency of CEDE
state can hurt performance. In such cases, the entry/exit overhead of
CEDE outweighs the power savings, leading to unnecessary state
transitions and higher latency.
Menu governor currently contains a special-case rule that prioritizes
the first non-polling state over polling, even when its target residency
is much longer than the predicted idle duration. On PowerPC/pseries,
where the gap between the polling state (Snooze) and the first non-polling
state (CEDE) is large, this behavior causes performance regressions.
Refine that special case by adding an extra requirement: the first
non-polling state can only be chosen if its target residency is below
the defined RESIDENCY_THRESHOLD_NS. If this condition is not satisfied,
polling is allowed instead, avoiding suboptimal non-polling state
entries.
This change is limited to the single special-case rule for the first
non-polling state. The general non-polling state selection logic in the
menu governor remains unchanged.
Performance improvement observed with pgbench on PowerPC (pseries)
system:
+---------------------------+------------+------------+------------+
| Metric | Baseline | Patched | Change (%) |
+---------------------------+------------+------------+------------+
| Transactions/sec (TPS) | 495,210 | 536,982 | +8.45% |
| Avg latency (ms) | 0.163 | 0.150 | -7.98% |
+---------------------------+------------+------------+------------+
CPUIdle state usage:
+--------------+--------------+-------------+
| Metric | Baseline | Patched |
+--------------+--------------+-------------+
| Total usage | 12,735,820 | 13,918,442 |
| Above usage | 11,401,520 | 1,598,210 |
| Below usage | 20,145 | 702,395 |
+--------------+--------------+-------------+
Above/Total and Below/Total usage percentages:
+------------------------+-----------+---------+
| Metric | Baseline | Patched |
+------------------------+-----------+---------+
| Above % (Above/Total) | 89.56% | 11.49% |
| Below % (Below/Total) | 0.16% | 5.05% |
| Total cpuidle miss (%) | 89.72% | 16.54% |
+------------------------+-----------+---------+
The results indicate that restricting CEDE selection to cases where
its residency matches the predicted idle time reduces mispredictions,
lowers unnecessary state transitions, and improves overall throughput.
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
[ rjw: Changelog edits, rebase ]
Link: https://patch.msgid.link/20251006013954.17972-1-aboorvad@linux.ibm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2de5cb9606 ]
In function `s5pv210_cpu_init`, a possible refcount inconsistency has
been identified, causing a resource leak.
Why it is a bug:
1. For every clk_get, there should be a matching clk_put on every
successive error handling path.
2. After calling `clk_get(dmc1_clk)`, variable `dmc1_clk` will not be
freed even if any error happens.
How it is fixed: For every failed path, an extra goto label is added to
ensure `dmc1_clk` will be freed regardlessly.
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e00f7a4bb ]
Some firmware implementations use the "Ones" ASL opcode to produce
an integer with all bits set in order to indicate missing speed or
power readings. This however only works when using 32-bit integers,
as the ACPI spec requires a 32-bit integer (0xFFFFFFFF) to be
returned for missing speed/power readings. With 64-bit integers the
"Ones" opcode produces a 64-bit integer with all bits set, violating
the ACPI spec regarding the placeholder value for missing readings.
Work around such buggy firmware implementation by also checking for
64-bit integers with all bits set when reading _FST.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
[ rjw: Typo fix in the changelog ]
Link: https://patch.msgid.link/20251007234149.2769-3-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d010473cd ]
Calling fwnode_get_next_child_node() in ACPI implementation of the fwnode
property API is somewhat problematic as the latter is used in the
impelementation of the former. Instead of using
fwnode_get_next_child_node() in acpi_graph_get_next_endpoint(), call
acpi_get_next_subnode() directly instead.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251001104320.1272752-3-sakari.ailus@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d6c58dae8 ]
Although commit 0c9992315e ("ACPICA: Avoid walking the ACPI Namespace
if it is not there") fixed the situation when both start_node and
acpi_gbl_root_node are NULL, the Linux kernel mainline now still crashed
on Honor Magicbook 14 Pro [1].
That happens due to the access to the member of parent_node in
acpi_ns_get_next_node(). The NULL pointer dereference will always
happen, no matter whether or not the start_node is equal to
ACPI_ROOT_OBJECT, so move the check of start_node being NULL
out of the if block.
Unfortunately, all the attempts to contact Honor have failed, they
refused to provide any technical support for Linux.
The bad DSDT table's dump could be found on GitHub [2].
DMI: HONOR FMB-P/FMB-P-PCB, BIOS 1.13 05/08/2025
Link: 1c1b57b9eb
Link: https://gist.github.com/Cryolitia/a860ffc97437dcd2cd988371d5b73ed7 [1]
Link: https://github.com/denis-bb/honor-fmb-p-dsdt [2]
Signed-off-by: Cryolitia PukNgae <cryolitia.pukngae@linux.dev>
Reviewed-by: WangYuli <wangyl5933@chinaunicom.cn>
[ rjw: Subject adjustment, changelog edits ]
Link: https://patch.msgid.link/20251125-acpica-v1-1-99e63b1b25f8@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fe4002cf7 ]
A KASAN build bloats these single load/store helpers such that
it fails to inline them:
vmlinux.o: error: objtool: irqentry_exit+0x5e8: call to instruction_pointer_set() with UACCESS enabled
Make sure the compiler isn't allowed to do stupid.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20251031105435.GU4068168@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d206fbad93 ]
Many people reported regressions on their database workloads due to:
155213a2ae ("sched/fair: Bump sd->max_newidle_lb_cost when newidle balance fails")
For instance Adam Li reported a 6% regression on SpecJBB.
Conversely this will regress schbench again; on my machine from 2.22
Mrps/s down to 2.04 Mrps/s.
Reported-by: Joseph Salisbury <joseph.salisbury@oracle.com>
Reported-by: Adam Li <adamli@os.amperecomputing.com>
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Chris Mason <clm@meta.com>
Link: https://lkml.kernel.org/r/20250626144017.1510594-2-clm@fb.com
Link: https://lkml.kernel.org/r/006c9df2-b691-47f1-82e6-e233c3f91faf@oracle.com
Link: https://patch.msgid.link/20251107161739.406147760@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 382748c05e ]
Commit 16b269436b ("sched/deadline: Modify cpudl::free_cpus
to reflect rd->online") introduced the cpudl_set/clear_freecpu
functions to allow the cpu_dl::free_cpus mask to be manipulated
by the deadline scheduler class rq_on/offline callbacks so the
mask would also reflect this state.
Commit 9659e1eeee ("sched/deadline: Remove cpu_active_mask
from cpudl_find()") removed the check of the cpu_active_mask to
save some processing on the premise that the cpudl::free_cpus
mask already reflected the runqueue online state.
Unfortunately, there are cases where it is possible for the
cpudl_clear function to set the free_cpus bit for a CPU when the
deadline runqueue is offline. When this occurs while a CPU is
connected to the default root domain the flag may retain the bad
state after the CPU has been unplugged. Later, a different CPU
that is transitioning through the default root domain may push a
deadline task to the powered down CPU when cpudl_find sees its
free_cpus bit is set. If this happens the task will not have the
opportunity to run.
One example is outlined here:
https://lore.kernel.org/lkml/20250110233010.2339521-1-opendmb@gmail.com
Another occurs when the last deadline task is migrated from a
CPU that has an offlined runqueue. The dequeue_task member of
the deadline scheduler class will eventually call cpudl_clear
and set the free_cpus bit for the CPU.
This commit modifies the cpudl_clear function to be aware of the
online state of the deadline runqueue so that the free_cpus mask
can be updated appropriately.
It is no longer necessary to manage the mask outside of the
cpudl_set/clear functions so the cpudl_set/clear_freecpu
functions are removed. In addition, since the free_cpus mask is
now only updated under the cpudl lock the code was changed to
use the non-atomic __cpumask functions.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff5c046648 ]
The run_readelf() function reads the entire output of readelf into a
single shell variable. For large object files with extensive debug
information, the size of this variable can exceed the system's
command-line argument length limit.
When this variable is subsequently passed to sed via `echo "${out}"`, it
triggers an "Argument list too long" error, causing the script to fail.
Fix this by redirecting the output of readelf to a temporary file
instead of a variable. The sed commands are then modified to read from
this file, avoiding the argument length limitation entirely.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d875e0eef ]
The end position to start truncating from may be at an offset into a
block, which under the current logic would result in overtruncation.
Adjust the calculation to account for unaligned end offsets.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20251111193658.3495942-3-joannelkoong@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7aa6bc3e87 ]
iomap_adjust_read_range() assumes that the position and length passed in
are block-aligned. This is not always the case however, as shown in the
syzbot generated case for erofs. This causes too many bytes to be
skipped for uptodate blocks, which results in returning the incorrect
position and length to read in. If all the blocks are uptodate, this
underflows length and returns a position beyond the folio.
Fix the calculation to also take into account the block offset when
calculating how many bytes can be skipped for uptodate blocks.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1b4c6a583 ]
maple_tree insertions can fail if we are seriously short on memory;
simple_offset_rename() does not recover well if it runs into that.
The same goes for simple_offset_rename_exchange().
Moreover, shmem_whiteout() expects that if it succeeds, the caller will
progress to d_move(), i.e. that shmem_rename2() won't fail past the
successful call of shmem_whiteout().
Not hard to fix, fortunately - mtree_store() can't fail if the index we
are trying to store into is already present in the tree as a singleton.
For simple_offset_rename_exchange() that's enough - we just need to be
careful about the order of operations.
For simple_offset_rename() solution is to preinsert the target into the
tree for new_dir; the rest can be done without any potentially failing
operations.
That preinsertion has to be done in shmem_rename2() rather than in
simple_offset_rename() itself - otherwise we'd need to deal with the
possibility of failure after successful shmem_whiteout().
Fixes: a2e459555c ("shmem: stable directory offsets")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37343524f0 ]
If the call to btrfs_delalloc_reserve_metadata() fails we jump to the
'out_noreserve' label and there we never free the extent_changeset
allocated by the previous call to btrfs_check_data_free_space() (if
qgroups are enabled). Fix this by calling extent_changeset_free() under
the 'out_noreserve' label.
Fixes: 6599716de2 ("btrfs: fix -ENOSPC mmap write failure on NOCOW files/extents")
Reported-by: syzbot+2f8aa76e6acc9fce6638@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/693a635a.a70a0220.33cd7b.0029.GAE@google.com/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b57f2ddd28 ]
In open_seed_devices(), when find_fsid() fails and we're in DEGRADED
mode, a new fs_devices is allocated via alloc_fs_devices() but is never
added to the seed_list before returning. This contrasts with the normal
path where fs_devices is properly added via list_add().
If any error occurs later in read_one_dev() or btrfs_read_chunk_tree(),
the cleanup code iterates seed_list to free seed devices, but this
orphaned fs_devices is never found and never freed, causing a memory
leak. Any devices allocated via add_missing_dev() and attached to this
fs_devices are also leaked.
Fix this by adding the newly allocated fs_devices to seed_list in the
degraded path, consistent with the normal path.
Fixes: 5f37583569 ("Btrfs: move the missing device to its own fs device list")
Reported-by: syzbot+eadd98df8bceb15d7fed@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=eadd98df8bceb15d7fed
Tested-by: syzbot+eadd98df8bceb15d7fed@syzkaller.appspotmail.com
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac44dcc788 ]
Commit 37cce22dbd ("bpf: verifier: Refactor helper access type
tracking") started distinguishing read vs write accesses performed by
helpers.
The second argument of bpf_d_path() is a pointer to a buffer that the
helper fills with the resulting path. However, its prototype currently
uses ARG_PTR_TO_MEM without MEM_WRITE.
Before 37cce22dbd, helper accesses were conservatively treated as
potential writes, so this mismatch did not cause issues. Since that
commit, the verifier may incorrectly assume that the buffer contents
are unchanged across the helper call and base its optimizations on this
wrong assumption. This can lead to misbehaviour in BPF programs that
read back the buffer, such as prefix comparisons on the returned path.
Fix this by marking the second argument of bpf_d_path() as
ARG_PTR_TO_MEM | MEM_WRITE so that the verifier correctly models the
write to the caller-provided buffer.
Fixes: 37cce22dbd ("bpf: verifier: Refactor helper access type tracking")
Co-developed-by: Zesen Liu <ftyg@live.com>
Signed-off-by: Zesen Liu <ftyg@live.com>
Co-developed-by: Peili Gao <gplhust955@gmail.com>
Signed-off-by: Peili Gao <gplhust955@gmail.com>
Co-developed-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Shuran Liu <electronlsr@gmail.com>
Reviewed-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20251206141210.3148-2-electronlsr@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 234483565d ]
If there is a large number (hundreds) of dmabufs allocated, the text
output generated from dmabuf_iter_seq_show can exceed common user buffer
sizes (e.g. PAGE_SIZE) necessitating multiple start/stop cycles to
iterate through all dmabufs. However the dmabuf iterator currently
returns NULL in dmabuf_iter_seq_start for all non-zero pos values, which
results in the truncation of the output before all dmabufs are handled.
After dma_buf_iter_begin / dma_buf_iter_next, the refcount of the buffer
is elevated so that the BPF iterator program can run without holding any
locks. When a stop occurs, instead of immediately dropping the reference
on the buffer, stash a pointer to the buffer in seq->priv until
either start is called or the iterator is released. This also enables
the resumption of iteration without first walking through the list of
dmabufs based on the pos value.
Fixes: 76ea955349 ("bpf: Add dmabuf iterator")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Link: https://lore.kernel.org/r/20251204000348.1413593-1-tjmercier@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 189e5deb94 ]
Analogically to the x86 commit 881a9c9cb7 ("bpf: Do not audit
capability check in do_jit()"), change the capable() call to
ns_capable_noaudit() in order to avoid spurious SELinux denials in audit
log.
The commit log from that commit applies here as well:
"""
The failure of this check only results in a security mitigation being
applied, slightly affecting performance of the compiled BPF program. It
doesn't result in a failed syscall, an thus auditing a failed LSM
permission check for it is unwanted. For example with SELinux, it causes
a denial to be reported for confined processes running as root, which
tends to be flagged as a problem to be fixed in the policy. Yet
dontauditing or allowing CAP_SYS_ADMIN to the domain may not be
desirable, as it would allow/silence also other checks - either going
against the principle of least privilege or making debugging potentially
harder.
Fix it by changing it from capable() to ns_capable_noaudit(), which
instructs the LSMs to not audit the resulting denials.
"""
Fixes: f300769ead ("arm64: bpf: Only mitigate cBPF programs loaded by unprivileged users")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Link: https://lore.kernel.org/r/20251204125916.441021-1-omosnace@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 313ef70a9f ]
Inside print_data_reloc_error(), if extent_from_logical() failed we
return immediately.
However there are the following cases where extent_from_logical() can
return error but still holds a path:
- btrfs_search_slot() returned 0
- No backref item found in extent tree
- No flags_ret provided
This is not possible in this call site though.
So for the above two cases, we can return without releasing the path,
causing extent buffer leaks.
Fixes: b9a9a85059 ("btrfs: output affected files when relocation fails")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5630f7557d ]
When we are logging a directory and the log context indicates that we
are logging a new name for some other file (that is or was inside that
directory), we skip logging the inodes for new dentries in the directory.
This is ok most of the time, but if after the rename or link operation
that triggered the logging of that directory, we have an explicit fsync
of that directory without the directory inode being evicted and reloaded,
we end up never logging the inodes for the new dentries that we found
during the new name logging, as the next directory fsync will only process
dentries that were added after the last time we logged the directory (we
are doing an incremental directory logging).
So make sure we always log new dentries for a directory even if we are
in a context of logging a new name.
We started skipping logging inodes for new dentries as of commit
c48792c6ee ("btrfs: do not log new dentries when logging that a new name
exists") and it was fine back then, because when logging a directory we
always iterated over all the directory entries (for leaves changed in the
current transaction) so a subsequent fsync would always log anything that
was previously skipped while logging a directory when logging a new name
(with btrfs_log_new_name()). But later support for incrementally logging
a directory was added in commit dc2872247e ("btrfs: keep track of the
last logged keys when logging a directory"), to avoid checking all dir
items every time we log a directory, so the check to skip dentry logging
added in the first commit should have been removed when the incremental
support for logging a directory was added.
A test case for fstests will follow soon.
Reported-by: Vyacheslav Kovalevsky <slava.kovalevskiy.2014@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/84c4e713-85d6-42b9-8dcf-0722ed26cb05@gmail.com/
Fixes: dc2872247e ("btrfs: keep track of the last logged keys when logging a directory")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
