AFAIU always returning -1 from lockdep's compare function
basically disables checking of dependencies between given
locks. Try to be a little more precise about what guarantees
that instance locks won't deadlock.
Right now we only nest them under protection of rtnl_lock.
Mostly in unregister_netdevice_many() and dev_close_many().
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250517200810.466531-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cover three recent cases:
1. missing ops locking for the lowers during netdev_sync_lower_features
2. missing locking for dev_set_promiscuity (plus netdev_ops_assert_locked
with a comment on why/when it's needed)
3. rcu lock during team_change_rx_flags
Verified that each one triggers when the respective fix is reverted.
Not sure about the placement, but since it all relies on teaming,
added to the teaming directory.
One ugly bit is that I add NETIF_F_LRO to netdevsim; there is no way
to trigger netdev_sync_lower_features without it.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250516232205.539266-1-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the pattern of calling and validating kzalloc then
fbnic_fw_init_cmpl with a single function, fbnic_fw_alloc_cmpl.
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250516164804.741348-1-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using random mac address is not an error since the driver continues to
function, it should be informative that the system has not assigned
a MAC address. This is inline with other drivers such as ax88796c,
dm9051 etc. Drop the error level to info level.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250516122655.442808-1-nm@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sky Huang says:
====================
Add built-in 2.5G ethernet phy support on MT7988
From: Sky Huang <skylake.huang@mediatek.com>
This patchset adds support for built-in 2.5Gphy on MT7988, sort file
and config sequence in related Kconfig and Makefile.
====================
Link: https://patch.msgid.link/20250516102327.2014531-1-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for internal 2.5Gphy on MT7988. This driver will load
necessary firmware and add appropriate time delay to make sure
that firmware works stably. The firmware loading procedure takes
about 11ms in this driver.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250516102327.2014531-3-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sort config and file names in Kconfig and Makefile in
drivers/net/phy/mediatek/ in alphabetical order.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250516102327.2014531-2-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Function __sctp_write_space() doesn't set poll key, which leads to
ep_poll_callback() waking up all waiters, not only these waiting
for the socket being writable. Set the key properly using
wake_up_interruptible_poll(), which is preferred over the sync
variant, as writers are not woken up before at least half of the
queue is available. Also, TCP does the same.
Signed-off-by: Petr Malat <oss@malat.biz>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250516081727.1361451-1-oss@malat.biz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RTL8127-internal PHY is RTL8261C which is a integrated 10Gbps PHY with ID
0x001cc890. It follows the code path of RTL8125/RTL8126 internal NBase-T
PHY.
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250516055622.3772-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current implementation of per-pdev frequency range updates assumes that
each pdev supports only a single band. As a result in ath12k_regd_update(),
bands are handled using an if-else structure, which limits updates to only
one of the band per pdev. This assumption does not hold for all chipsets.
For example, the WCN7850 supports multiple bands within a single pdev.
Hence to accommodate such cases, update the logic to account for all band
cases by handling each band in a separate if conditions instead of the
previous if-else structure.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 13324cecbb ("wifi: ath12k: Update frequency range if reg rules changes")
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250520-fix_freq_range_update-v1-1-e061fd147b87@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The function calls bitmap_empty() just before find_first_bit(). Both
functions are O(N). Because find_first_bit() returns >= nbits in case of
empty bitmap, the bitmap_empty() test may be avoided.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://patch.msgid.link/20250326155200.39895-1-yury.norov@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Fix the handling of err_wq_init and err_reg_netdev paths in
enetc4_pf_netdev_create() function.
Fixes: 6c5bafba34 ("net: enetc: add MAC filtering for i.MX95 ENETC PF")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250516052734.3624191-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow to inherit valid properties from the dsi-controller. This fixes the
following warning when adding a panel property:
rzg2lc.dtb: dsi@10850000: '#address-cells', '#size-cells', 'panel@0' do not
match any of the regexes: 'pinctrl-[0-9]+'
from schema $id:
http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
Also add a panel property to the example.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250520151112.3278569-1-hugo@hugovil.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add sgx,vz89te part number since it is similar to sgx,vz89x,
which is documented in trivial-devices.yaml.
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250515000225.79239-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Alan Maguire says:
====================
libbpf: support multi-split BTF
In discussing handling of inlines in BTF [1], one area which we may need
support for in the future is multiple split BTF, where split BTF sits
atop another split BTF which sits atop base BTF. This two-patch series
fixes one issue discovered when testing multi-split BTF and extends the
split BTF test to cover multi-split BTF also.
[1] https://lore.kernel.org/dwarves/20250416-btf_inline-v1-0-e4bd2f8adae5@meta.com/
====================
Link: https://patch.msgid.link/20250519165935.261614-1-alan.maguire@oracle.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Extend split BTF test to cover case where we create split BTF on top of
existing split BTF and add info to it; ensure that such BTF can be
created and handled by searching within it, dumping/comparing to expected.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250519165935.261614-3-alan.maguire@oracle.com
libbpf handling of split BTF has been written largely with the
assumption that multiple splits are possible, i.e. split BTF on top of
split BTF on top of base BTF. One area where this does not quite work
is string handling in split BTF; the start string offset should be the
base BTF string section length + the base BTF string offset. This
worked in the past because for a single split BTF with base the start
string offset was always 0.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250519165935.261614-2-alan.maguire@oracle.com
As discussed in the thread containing
https://lore.kernel.org/linux-crypto/20250510053308.GB505731@sol/, the
Power10-optimized Poly1305 code is currently not safe to call in softirq
context. Disable it for now. It can be re-enabled once it is fixed.
Fixes: ba8f8624fd ("crypto: poly1305-p10 - Glue code for optmized Poly1305 implementation for ppc64le")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 3ef9f710ef ("pinctrl: mediatek: Add EINT support for multiple
addresses") introduced an access to the 'soc' field of struct
mtk_pinctrl in mtk_eint_do_init() and for that an include of
pinctrl-mtk-common-v2.h.
However, pinctrl drivers relying on the v1 common driver include
pinctrl-mtk-common.h instead, which provides another definition of
struct mtk_pinctrl that does not contain an 'soc' field.
Since mtk_eint_do_init() can be called both by v1 and v2 drivers, it
will now try to dereference an invalid pointer when called on v1
platforms. This has been observed on Genio 350 EVK (MT8365), which
crashes very early in boot (the kernel trace can only be seen with
earlycon).
In order to fix this, since 'struct mtk_pinctrl' was only needed to get
a 'struct mtk_eint_pin', make 'struct mtk_eint_pin' a parameter
of mtk_eint_do_init() so that callers need to supply it, removing
mtk_eint_do_init()'s dependency on any particular 'struct mtk_pinctrl'.
Fixes: 3ef9f710ef ("pinctrl: mediatek: Add EINT support for multiple addresses")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/20250520-genio-350-eint-null-ptr-deref-fix-v2-1-6a3ca966a7ba@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Rewrite the ADV7511 driver to use implementation provided by the DRM
HDMI connector framework, including the Audio and CEC bits. Drop the
in-bridge connector support and use drm_bridge_connector if the host
requires the connector to be provided by the bridge.
Note: currently only AVI InfoFrames are supported. Existing driver
doesn't support programming any other InfoFrames directly and Audio
InfoFrame seems to be programmed using individual bits and pieces rather
than programming it directly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-10-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Allow HDMI DRM bridges to create CEC notifier. Physical address is
handled automatically by drm_atomic_helper_connector_hdmi_hotplug()
being called from .detect() path.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-8-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add generic CEC helpers to be used by HDMI drivers. Both notifier and
and adapter are supported for registration. Once registered, the driver
can call common set of functions to update physical address, to
invalidate it or to unregister CEC data. Unlike drm_connector_cec_funcs
(which provides interface common to all implementations, including, but
not limited to the CEC adapter, CEC notifier, CEC pin-based adapter,
etc) the struct drm_connector_hdmi_cec_adapter_ops provides callbacks
specific to the CEC adapter implementations.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-5-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
THe Kconfig symbol DRM_DISPLAY_DP_AUX_CEC is a boolean which simply
toggles whether DP_AUX_CEC support should be built into the
drm_display_helper (which can be eithera module or built-in into the
kernel). If DRM_DISPLAY_DP_AUX_CEC is selected, then CEC_CORE is
selected to be built-in into the kernel even if DRM_DISPLAY_HELPER is
selected to be built as a module. Move CEC_CORE selection to the latter
symbol in order to allow it to be built as a module.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-4-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
As a preparation to adding HDMI CEC helper code, add CEC-related fields
to the struct drm_connector. The callbacks abstract CEC infrastructure
in order to support CEC adapters and CEC notifiers in a universal way.
CEC data is a void pointer as it allows us to make CEC data
helper-specific. For example, currently it will be either cec_notifier
or cec_adapter + drm_connector_hdmi_cec_funcs. Later cec-pin might store
platform callbacks here. DP CEC might need to store AUX pointer, etc.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-3-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
By default HDMI codec registers all formats supported on the I2S bus.
Allow bridges (and connectors) to limit the list of the PCM formats
supported by the HDMI codec.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-2-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
WHen adding HDMI fields I didn't notice the private: declaration for HPD
fields. Move private fields to the end of the struct drm_bride to have
clear distinction between private and public fields.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-1-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Error-handling paths in msm_pinctrl_probe() don't call
a function required to unroll restart handler registration,
unregister_restart_handler(). Instead of adding calls to this function,
switch the msm pinctrl code into using devm_register_sys_off_handler().
Fixes: cf1fc18762 ("pinctrl: qcom: use restart_notifier mechanism for ps_hold")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-2-249999af0fc1@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On Qualcomm platforms if the board uses GPIO hogs msm_pinmux_request()
calls gpiochip_line_is_valid(). After commit 8015443e24 ("gpio: Hide
valid_mask from direct assignments") gpiochip_line_is_valid() uses
gc->gpiodev, which is NULL when GPIO hog pins are being processed.
Thus after this commit using GPIO hogs causes the following crash. In
order to fix this, verify that gc->gpiodev is not NULL.
Note: it is not possible to reorder calls (e.g. by calling
msm_gpio_init() before pinctrl registration or by splitting
pinctrl_register() into _and_init() and pinctrl_enable() and calling the
latter function after msm_gpio_init()) because GPIO chip registration
would fail with EPROBE_DEFER if pinctrl is not enabled at the time of
registration.
pc : gpiochip_line_is_valid+0x4/0x28
lr : msm_pinmux_request+0x24/0x40
sp : ffff8000808eb870
x29: ffff8000808eb870 x28: 0000000000000000 x27: 0000000000000000
x26: 0000000000000000 x25: ffff726240f9d040 x24: 0000000000000000
x23: ffff7262438c0510 x22: 0000000000000080 x21: ffff726243ea7000
x20: ffffab13f2c4e698 x19: 0000000000000080 x18: 00000000ffffffff
x17: ffff726242ba6000 x16: 0000000000000100 x15: 0000000000000028
x14: 0000000000000000 x13: 0000000000002948 x12: 0000000000000003
x11: 0000000000000078 x10: 0000000000002948 x9 : ffffab13f50eb5e8
x8 : 0000000003ecb21b x7 : 000000000000002d x6 : 0000000000000b68
x5 : 0000007fffffffff x4 : ffffab13f52f84a8 x3 : ffff8000808eb804
x2 : ffffab13f1de8190 x1 : 0000000000000080 x0 : 0000000000000000
Call trace:
gpiochip_line_is_valid+0x4/0x28 (P)
pin_request+0x208/0x2c0
pinmux_enable_setting+0xa0/0x2e0
pinctrl_commit_state+0x150/0x26c
pinctrl_enable+0x6c/0x2a4
pinctrl_register+0x3c/0xb0
devm_pinctrl_register+0x58/0xa0
msm_pinctrl_probe+0x2a8/0x584
sdm845_pinctrl_probe+0x20/0x88
platform_probe+0x68/0xc0
really_probe+0xbc/0x298
__driver_probe_device+0x78/0x12c
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x208/0x5e8
worker_thread+0x1b4/0x35c
kthread+0x144/0x220
ret_from_fork+0x10/0x20
Code: b5fffba0 17fffff2 9432ec27 f9400400 (f9428800)
Fixes: 8015443e24 ("gpio: Hide valid_mask from direct assignments")
Reported-by: Doug Anderson <dianders@chromium.org>
Closes: https://lore.kernel.org/r/CAD=FV=Vg8_ZOLgLoC4WhFPzhVsxXFC19NrF38W6cW_W_3nFjbw@mail.gmail.com
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-1-249999af0fc1@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pinctrl drivers are not enabled in defconfig. Instead of listing
each driver in the defconfig, enable then by default if the platform/soc
support is enabled as well.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/20250514131342.755840-2-alexander.stein@ew.tq-group.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Although the driver itself does not depend on OF itself, it selects
PINCTRL_IMX which depends on OF. So only select PINCTRL_IMX if OF is
already selected to ensure dependencies are met.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/20250514131342.755840-1-alexander.stein@ew.tq-group.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is no user of this member anymore. We can remove it.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
No client sets 'of_node' anymore, so we don't need to handle the case in
the core anymore.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
'of_node' in i2c_boardinfo is deprecated in favor of 'fwnode'. The I2C
core handles them equally, so simply convert this driver to fwnode.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
io_uring_cmd_import_fixed_vec() is declared in both
include/linux/io_uring/cmd.h and io_uring/uring_cmd.h. The declarations
are identical (if redundant) for CONFIG_IO_URING=y. But if
CONFIG_IO_URING=N, include/linux/io_uring/cmd.h declares the function as
static inline while io_uring/uring_cmd.h declares it as extern. This
causes linker errors if the declaration in io_uring/uring_cmd.h is used.
Remove the declaration in io_uring/uring_cmd.h to avoid linker errors
and prevent the declarations getting out of sync.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: ef49027529 ("io_uring/cmd: introduce io_uring_cmd_import_fixed_vec")
Link: https://lore.kernel.org/r/20250520193337.1374509-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update the allowed_cpus selftest to include a check to validate the
behavior of scx_bpf_select_cpu_and() when invoked via a BPF test_run
call.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Allow scx_bpf_select_cpu_and() to be used from an unlocked context, in
addition to ops.enqueue() or ops.select_cpu().
This enables schedulers, including user-space ones, to implement a
consistent idle CPU selection policy and helps reduce code duplication.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Validate locking correctness when accessing p->nr_cpus_allowed and
p->cpus_ptr inside scx_bpf_select_cpu_and(): if the rq lock is held,
access is safe; otherwise, require that p->pi_lock is held.
This allows to catch potential unsafe calls to scx_bpf_select_cpu_and().
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Relocate the scx_kf_allowed_if_unlocked(), so it can be used from other
source files (e.g., ext_idle.c).
No functional change.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Axel Forsman <axfo@kvaser.com> says:
This patch series fixes a couple of race conditions in the
kvaser_pciefd driver surfaced by enabling MSI interrupts and the new
Kvaser PCIe 8xCAN.
Changes since version 2:
* Rebase onto linux-can/main to resolve del_timer()/timer_delete()
merge conflict.
* Reword 2nd commit message slightly.
Changes since version 1:
* Change type of srb_cmd_reg from "__le32 __iomem *" to
"void __iomem *".
* Maintain TX FIFO count in driver instead of querying HW.
* Stop queue at end of .start_xmit() if full.
Link: https://patch.msgid.link/20250520114332.8961-1-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Going bus-off on a channel doing RX could result in dropped packets.
As netif_running() gets cleared before the channel abort procedure,
the handling of any last RDATA packets would see netif_rx() return
non-zero to signal a dropped packet. kvaser_pciefd_read_buffer() dealt
with this "error" by breaking out of processing the remaining DMA RX
buffer.
Only return an error from kvaser_pciefd_read_buffer() due to packet
corruption, otherwise handle it internally.
Cc: stable@vger.kernel.org
Signed-off-by: Axel Forsman <axfo@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250520114332.8961-4-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
