Platforms that do not support SLPC are exempted from the GuC PC support.
The GuC PC does not get initialized, and neither do its BOs get created.
This causes a problem because the GuC PC debugfs file is still being
created. Whenever the file is attempted to read, it causes a NULL
pointer dereference on the supposed BO of the GuC PC.
So, make the creation of SLPC debugfs files conditional to when SLPC
features are supported.
Fixes: aaab5404b1 ("drm/xe: Introduce GuC PC debugfs")
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com>
Link: https://lore.kernel.org/r/20250516141902.5614-1-aradhya.bhatia@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
In cxlctl_get_supported_features(), there is a code block that handles
the case where the requested is equal to 0. But the code following the
code block can also handle this situation. So the code block is not
needed.
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20250516143220.35302-1-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
idpf_features_check is used to validate the TX packet. skb header
length is compared with the hardware supported value received from
the device control plane. The value is stored in the adapter structure
and to access it, vport pointer is used. During reset all the vports
are released and the vport pointer that the netdev private structure
points to is NULL.
To avoid null-ptr-deref, store the max header length value in netdev
private structure. This also helps to cache the value and avoid
accessing adapter pointer in hot path.
BUG: kernel NULL pointer dereference, address: 0000000000000068
...
RIP: 0010:idpf_features_check+0x6d/0xe0 [idpf]
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x154/0x520
? exc_page_fault+0x76/0x190
? asm_exc_page_fault+0x26/0x30
? idpf_features_check+0x6d/0xe0 [idpf]
netif_skb_features+0x88/0x310
validate_xmit_skb+0x2a/0x2b0
validate_xmit_skb_list+0x4c/0x70
sch_direct_xmit+0x19d/0x3a0
__dev_queue_xmit+0xb74/0xe70
...
Fixes: a251eee621 ("idpf: add SRIOV support and other ndo_ops")
Reviewed-by: Madhu Chititm <madhu.chittim@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If an aggregate has the following conditions:
- The SRIOV LAG DDP package has been enabled
- The bond is in 802.3ad LACP mode
- The bond is disqualified from supporting SRIOV VF LAG
- Both interfaces were added simultaneously to the bond (same command)
Then there is a chance that the two interfaces will be assigned different
LACP Aggregator ID's. This will cause a failure of the LACP control over
the bond.
To fix this, we can detect if the primary interface for the bond (as
defined by the driver) is not in switchdev mode, and exit the setup flow
if so.
Reproduction steps:
%> ip link add bond0 type bond mode 802.3ad miimon 100
%> ip link set bond0 up
%> ifenslave bond0 eth0 eth1
%> cat /proc/net/bonding/bond0 | grep Agg
Check for Aggregator IDs that differ.
Fixes: ec5a6c5f79 ("ice: process events created by lag netdev event handler")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_vc_repr_add_mac() function indicates that it does not store the MAC
address filters in the firmware. However, it still increments vf->num_mac.
This is incorrect, as vf->num_mac should represent the number of MAC
filters currently programmed to firmware.
Indeed, we only perform this increment if the requested filter is a unicast
address that doesn't match the existing vf->hw_lan_addr. In addition,
ice_vc_repr_del_mac() does not decrement the vf->num_mac counter. This
results in the counter becoming out of sync with the actual count.
As it turns out, vf->num_mac is currently only used in legacy made without
port representors. The single place where the value is checked is for
enforcing a filter limit on untrusted VFs.
Upcoming patches to support VF Live Migration will use this value when
determining the size of the TLV for MAC address filters. Fix the
representor mode function to stop incrementing the counter incorrectly.
Fixes: ac19e03ef7 ("ice: allow process VF opcodes in different ways")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Throughout the verifier's logic, there are multiple checks for
inconsistent states that should never happen and would indicate a
verifier bug. These bugs are typically logged in the verifier logs and
sometimes preceded by a WARN_ONCE.
This patch reworks these checks to consistently emit a verifier log AND
a warning when CONFIG_DEBUG_KERNEL is enabled. The consistent use of
WARN_ONCE should help fuzzers (ex. syzkaller) expose any situation
where they are actually able to reach one of those buggy verifier
states.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/aCs1nYvNNMq8dAWP@mail.gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit introduces a debugfs interface to display the contents of the
VGIC Interrupt Translation Service (ITS) tables.
The ITS tables map Device/Event IDs to Interrupt IDs and target processors.
Exposing this information through debugfs allows for easier inspection and
debugging of the interrupt routing configuration.
The debugfs interface presents the ITS table data in a tabular format:
Device ID: 0x0, Event ID Range: [0 - 31]
EVENT_ID INTID HWINTID TARGET COL_ID HW
-----------------------------------------------
0 8192 0 0 0 0
1 8193 0 0 0 0
2 8194 0 2 2 0
Device ID: 0x18, Event ID Range: [0 - 3]
EVENT_ID INTID HWINTID TARGET COL_ID HW
-----------------------------------------------
0 8225 0 0 0 0
1 8226 0 1 1 0
2 8227 0 3 3 0
Device ID: 0x10, Event ID Range: [0 - 7]
EVENT_ID INTID HWINTID TARGET COL_ID HW
-----------------------------------------------
0 8229 0 3 3 1
1 8230 0 0 0 1
2 8231 0 1 1 1
3 8232 0 2 2 1
4 8233 0 3 3 1
The output is generated using the seq_file interface, allowing for efficient
handling of potentially large ITS tables.
This interface is read-only and does not allow modification of the ITS
tables. It is intended for debugging and informational purposes only.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20250220224247.2017205-1-jingzhangos@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Update the documentation to reflect the migration of the following
architectures to the centralized syscall table format:
arc, arm64, csky, hexagon, loongarch, nios2, openrisc, riscv
As of commit 3db80c999d ("riscv: convert to generic syscall table"),
these architectures no longer rely on include/uapi/asm-generic/unistd.h.
Instead, syscall table headers (syscall_table_{32,64}.h) are generated by
scripts/syscalltbl.sh based on entries in scripts/syscall.tbl, with ABIs
specified in arch/*/kernel/Makefile.syscalls.
For the convenience of developers working with older kernel versions, the
original documentation is fully retained, with new sections added to
cover the scripts/syscall.tbl approach.
Verified with `make htmldocs`.
Signed-off-by: Jesung Yang <y.j3ms.n@gmail.com>
Link: https://lore.kernel.org/lkml/20240704143611.2979589-1-arnd@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250506194841.1567737-1-y.j3ms.n@gmail.com>
Fix 'peace' to 'piece' in the ntb documentation
Signed-off-by: Utkarsh Tiwari <utkarsh02t@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250519080248.648971-1-utkarsh02t@gmail.com>
When the procfs content is generated for a bcm_op which is in the process
to be removed the procfs output might show unreliable data (UAF).
As the removal of bcm_op's is already implemented with rcu handling this
patch adds the missing rcu_read_lock() and makes sure the list entries
are properly removed under rcu protection.
Fixes: f1b4e32aca ("can: bcm: use call_rcu() instead of costly synchronize_rcu()")
Reported-by: Anderson Nascimento <anderson@allelesecurity.com>
Suggested-by: Anderson Nascimento <anderson@allelesecurity.com>
Tested-by: Anderson Nascimento <anderson@allelesecurity.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20250519125027.11900-2-socketcan@hartkopp.net
Cc: stable@vger.kernel.org # >= 5.4
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The CAN broadcast manager (CAN BCM) can send a sequence of CAN frames via
hrtimer. The content and also the length of the sequence can be changed
resp reduced at runtime where the 'currframe' counter is then set to zero.
Although this appeared to be a safe operation the updates of 'currframe'
can be triggered from user space and hrtimer context in bcm_can_tx().
Anderson Nascimento created a proof of concept that triggered a KASAN
slab-out-of-bounds read access which can be prevented with a spin_lock_bh.
At the rework of bcm_can_tx() the 'count' variable has been moved into
the protected section as this variable can be modified from both contexts
too.
Fixes: ffd980f976 ("[CAN]: Add broadcast manager (bcm) protocol")
Reported-by: Anderson Nascimento <anderson@allelesecurity.com>
Tested-by: Anderson Nascimento <anderson@allelesecurity.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20250519125027.11900-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The nfs inodes for referral anchors that have not yet been followed have
their filehandles zeroed out.
Attempting to call getxattr() on one of these will cause the nfs client
to send a GETATTR to the nfs server with the preceding PUTFH sans
filehandle. The server will reply NFS4ERR_NOFILEHANDLE, leading to -EIO
being returned to the application.
For example:
$ strace -e trace=getxattr getfattr -n system.nfs4_acl /mnt/t/ref
getxattr("/mnt/t/ref", "system.nfs4_acl", NULL, 0) = -1 EIO (Input/output error)
/mnt/t/ref: system.nfs4_acl: Input/output error
+++ exited with 1 +++
Have the xattr handlers return -ENODATA instead.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
These are long-held references to the netns, so make sure the refcount
tracker is aware of them.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
RFC2203 requires that retransmitted messages use a new gss sequence
number, but the same XID. This means that if the server is just slow
(e.x. overloaded), the client might receive a response using an older
seqno than the one it has recorded.
Currently, Linux's client immediately retransmits in this case. However,
this leads to a lot of wasted retransmits until the server eventually
responds faster than the client can resend.
Client -> SEQ 1 -> Server
Client -> SEQ 2 -> Server
Client <- SEQ 1 <- Server (misses, expecting seqno = 2)
Client -> SEQ 3 -> Server (immediate retransmission on miss)
Client <- SEQ 2 <- Server (misses, expecting seqno = 3)
Client -> SEQ 4 -> Server (immediate retransmission on miss)
... and so on ...
This commit makes it so that we ignore messages with bad checksums
due to seqnum mismatch, and rely on the usual timeout behavior for
retransmission instead of doing so immediately.
Signed-off-by: Nikhil Jha <njha@janestreet.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
This implements a sequence number cache of the last three (right now
hardcoded) sent sequence numbers for a given XID, as suggested by the
RFC.
From RFC2203 5.3.3.1:
"Note that the sequence number algorithm requires that the client
increment the sequence number even if it is retrying a request with
the same RPC transaction identifier. It is not infrequent for
clients to get into a situation where they send two or more attempts
and a slow server sends the reply for the first attempt. With
RPCSEC_GSS, each request and reply will have a unique sequence
number. If the client wishes to improve turn around time on the RPC
call, it can cache the RPCSEC_GSS sequence number of each request it
sends. Then when it receives a response with a matching RPC
transaction identifier, it can compute the checksum of each sequence
number in the cache to try to match the checksum in the reply's
verifier."
Signed-off-by: Nikhil Jha <njha@janestreet.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
To pick up changes for other tools/ libraries used by perf and for
header synchronization with the kernel sources originals.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add Epoch Subsystem (EPSS) L3 provider support on SA8775P SoCs.
Current interconnect framework is based on static IDs for creating node
and registering with framework. This becomes a limitation for topologies
where there are multiple instances of same interconnect provider.
Modified interconnect framework APIs to create and link icc node with
dynamic IDs, this will help to overcome the dependency on static IDs.
* icc-sa8775p
dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
interconnect: core: Add dynamic id allocation support
interconnect: qcom: Add multidev EPSS L3 support
interconnect: qcom: icc-rpmh: Add dynamic icc node id support
interconnect: qcom: sa8775p: Add dynamic icc node id support
Link: https://lore.kernel.org/r/20250415095343.32125-1-quic_rlaggysh@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The mc_virt & clk_virt nodes are virtual and doesn't have associated registers,
thus the regmap config will fail with:
qnoc-sm8650 interconnect-0: error -EINVAL: invalid resource (null)
Remove the regmap config since QoS will never be applied to those virtual
nodes.
Reported-by: Pengyu Luo <mitltlatltl@gmail.com>
Fixes: 40ef9b6b77 ("interconnect: qcom: sm8650: enable QoS configuration")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250519-topic-sm8650-upstream-icc-qos-fix-v1-1-6ace779250aa@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Introduction paragraph to the ioctl numbers table states that only
ioctls in up to ancient Linux kernel version (v2.6.31) for x86 arch are
listed. This is inaccurate as the table also lists ioctls from non-x86
archs and the kernel is continously developed (currently in v6.x).
Update the paragraph accordingly.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250508005838.8381-2-bagasdotme@gmail.com>
Since commit 5e25b972a2 ("docs: changes: update Python minimal version"),
the minimal Sphinx version is 3.4.3.
Drop support for older versions from the config file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250507121117.317810-1-mchehab+huawei@kernel.org>
Add the kernel-doc comments from lib/kobject_uevent.c to the
"Kernel objects manipulation" section of driver API Basics.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250509005538.685678-1-rdunlap@infradead.org>
Cleanup some punctuation, capital letter, and a missing word
in relay.rst.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250512023233.107582-1-rdunlap@infradead.org>
Corrects a spelling mistake in Documentation/trace/coresight/panic.rst
where "incase" was used instead of "in case".
Signed-off-by: Hendrik Hamerlinck <hendrik.hamerlinck@hammernet.be>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250513110931.15072-1-hendrik.hamerlinck@hammernet.be>
pcim_request_region_exclusive() was only needed for redirecting the
relatively exotic exclusive request functions in pci.c in case of them
operating in managed mode.
The managed nature has been removed from those functions and no one else
uses pcim_request_region_exclusive().
Remove pcim_request_region_exclusive().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20250519112959.25487-5-phasta@kernel.org
pcim_enable_device() is not related anymore to switching the mode of
operation of any functions. It merely sets up a devres callback for
automatically disabling the PCI device on driver detach.
Adjust the function's documentation.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250519112959.25487-4-phasta@kernel.org
All functions based on __pci_request_region() and its release counter
part support "hybrid mode", where the functions become managed if the
PCI device was enabled with pcim_enable_device().
Removing this undesirable feature requires to remove all users who
activated their device with that function and use one of the affected
request functions.
These users were:
ASoC
alsa
cardreader
cirrus
i2c
mmc
mtd
mtd
mxser
net
spi
vdpa
vmwgfx
all of which have been ported to always-managed pcim_ functions by now.
The hybrid nature can, thus, be removed from the aforementioned PCI
functions.
Remove all function guards and documentation in pci.c related to the
hybrid redirection. Adjust the visibility of pcim_release_region().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20250519112959.25487-3-phasta@kernel.org
Merge the mmc fixes for v6.15-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.16.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add a new struct for platform data for the ti,am62-sdhci compatible to
apply additional quirks, namely "SDHCI_QUIRK2_SUPPRESS_V1P8_ENA", to
host controllers with am62 compatible.
Note, the fix was originally introduced by commit 941a7abd46
("mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch") but was
found to be applied too broadly and had to be reverted.
This fixes MMC init failures seen across am62x boards.
Fixes: ac5a41b472 ("Revert "mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch"")
Fixes: 941a7abd46 ("mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch")
Cc: stable@vger.kernel.org
Suggested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250516203121.3736379-1-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add X86 and SPI_MEM as dependencies for the spi_amd driver to ensure it is
built only on relevant platforms and with the required SPI memory
framework.
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20250516100658.585654-4-Raju.Rangoju@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SPI index mode has hardware limitation of transferring only 64 bytes per
transaction due to fixed number of FIFO registers. This constraint leads to
performance issues when reading/writing data to/from NAND/NOR flash
devices, as the controller must issue multiple requests to read/write
64-byte chunks, even if the slave can transfer up to 2 or 4 KB in a single
transaction.
The AMD HID2 SPI controller supports DMA mode, allowing for reading/writing
up to 4 KB of data in a single transaction. The existing spi_amd driver
already supports HID2 DMA read operations.
This patch introduces changes to implement HID2 DMA single mode basic write
support for the HID2 SPI controller.
Co-developed-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Signed-off-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20250516100658.585654-3-Raju.Rangoju@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add changes to replace the usage of read{q,b} MMIO accessors with direct
memory copy logic for reading data from DMA buffer.
Co-developed-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Signed-off-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20250516100658.585654-2-Raju.Rangoju@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "$id" value must match the relative path under bindings/ and is
missing the "net" sub-directory.
Fixes: 09328600c2 ("dt-bindings: can: convert microchip,mcp251x.txt to yaml")
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250507154201.1589542-1-robh@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Current suspend/resume logic has one issue. In suspend, will config
register when call sdhci_suspend_host(), but at this time, can't
guarantee host in runtime resume state. If not, the per clock is gate
off, access register will hang.
In sdhci_esdhc_suspend/sdhci_esdhc_resume, remove sdhci_suspend_host()
and sdhci_resume_host(), all are handled in runtime PM callbacks except
the wakeup irq setting. For wakeup irq setting, use pm_runtime_get_sync()
in sdhci_esdhc_suspend() to make sure clock gate on.
Remove pinctrl_pm_select_default_state() in sdhci_esdhc_resume, because
pm_runtime_force_resume() already config the pinctrl state according to
ios timing, and here config the default pinctrl state again is wrong for
SDIO3.0 device if it keep power in suspend.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250514094903.1771642-2-ziniu.wang_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Export the sdhci_enable_irq_wakeups() and sdhci_disable_irq_wakeups,
so other driver can use them.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250514094903.1771642-1-ziniu.wang_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On AmpereOne AC04, updates to HCR_EL2 can rarely corrupt simultaneous
translations for data addresses initiated by load/store instructions.
Only instruction initiated translations are vulnerable, not translations
from prefetches for example. A DSB before the store to HCR_EL2 is
sufficient to prevent older instructions from hitting the window for
corruption, and an ISB after is sufficient to prevent younger
instructions from hitting the window for corruption.
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250513184514.2678288-1-scott@os.amperecomputing.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The SDHCI controller found in SpacemiT K1 SoC features SD,
SDIO, eMMC support, such as:
- Compatible for 4-bit SDIO 3.0 UHS-I protocol, up to SDR104
- Compatible for 4-bit SD 3.0 UHS-I protocol, up to SDR104
- Compatible for 8bit eMMC5.1, up to HS400
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250509-20-k1-sdhci-v3-2-526c35feaa20@gentoo.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for the SD/eMMC Host Controller found in SpacemiT K1 SoC,
The controller supports data transmission of MMC, SDIO, SD protocol.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250509-20-k1-sdhci-v3-1-526c35feaa20@gentoo.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
- Drop CONFIG_PRIME_NUMBERS=m (auto-modular since commit
313b38a6ec ("lib/prime_numbers: convert self-test to KUnit")),
- Drop CONFIG_TEST_PRINTF=m (Replaced by auto-modular
CONFIG_PRINTF_KUNIT_TEST in commit 7a79e7daa8 ("printf:
convert self-test to KUnit")),
- Drop CONFIG_TEST_SCANF=m (Replaced by auto-modular
CONFIG_SCANF_KUNIT_TEST in commit 97c1f302f2 ("scanf: convert
self-test to KUnit")),
- Drop CONFIG_TEST_BLACKHOLE_DEV=m (replaced by auto-modular
CONFIG_BLACKHOLE_DEV_KUNIT_TEST in commit b341f6fd45
("blackhole_dev: convert self-test to KUnit")).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/e7d9ff0ef58efaa3e0adcb7207e6b44d948caa25.1744615371.git.geert@linux-m68k.org
Correct pin-point to pinpoint, If that the case to If that is the case,
and its only slightly modified to it's only slightly modified in
Documentation/admin-guide/reporting-issues.rst for proper spelling and grammar.
Signed-off-by: Shivam Sharma <10sharmashivam@gmail.com>
Acked-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250518172658.6983-1-10sharmashivam@gmail.com>
It appears that some vendors provision the boot areas with valid part
tables (GPT) in order to have identifiable partitions for device and
firmware specific data, such has the qualcomm CDT (Qualcomm Config
Data Table). Additionally, these boot areas can be utilized to host
device-specific IDs, calibration data, and other critical information.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250507134538.575912-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
