Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Constify timbgpio_irqchip, flag the irq_chip as IRQCHIP_IMMUTABLE,
add the new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-8-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Constify xgene_gpio_sb_irq_chip, flag the irq_chip as IRQCHIP_IMMUTABLE,
add the new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-7-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Constify gpio_irqchip, flag the irq_chip as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-6-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use "struct davinci_gpio_controller *chips" as irq chip data to prepare
for immutable irq chip, then it will be easy to get gpio_chip pointer in
irq mask/unmask.
No functional change.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-5-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Flag the irq_chip as IRQCHIP_IMMUTABLE, add the new helper functions,
and call the appropriate gpiolib functions.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-4-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Constify lpc18xx_gpio_pin_ic, flag the irq_chip as IRQCHIP_IMMUTABLE,
add the new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-3-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Constify grgpio_irq_chip, flag the irq_chip as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-2-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpiolib is moving to make irq_chip immutable, otherwise
there is warning: "not an immutable chip, please consider fixing it!"
The bcm_gpio_irq_chip already has irq hooks configured correctly,
bcm_kona_gpio_irq_mask/bcm_kona_gpio_irq_unmask calls gpiochip_disable_irq/
gpiochip_enable_irq, and bcm_kona_gpio_irq_reqres/irq_release_resources
calls gpiochip_reqres_irq/gpiochip_relres_irq.
So just need to flag it as IRQCHIP_IMMUTABLE.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-1-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
drivers/pinctrl/pinctrl-at91.c uses struct gpio_chip::base to find out
which bit to set in a register:
dev_dbg(npct->dev, "enable pin %u as GPIO\n", offset);
mask = 1 << (offset - chip->base);
This adds a non-obvious dependency on the global numberspace from the
GPIO driver itself, even if all consumers use the descriptor API.
More such instances may exist and will need to be fixed in the quest for
removal of the global numberspace, so add a reminder about it to the
TODO list.
Link: https://lore.kernel.org/all/1d00c056-3d61-4c22-bedd-3bae0bf1ddc4@pengutronix.de/
Suggested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20250507-gpio-chip-base-readback-v1-1-ade56e38480b@pengutronix.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver is susceptible to a form of the bug explained in commit
c26a2c2ddc ("gianfar: Fix TX timestamping with a stacked DSA driver")
and in Documentation/networking/timestamping.rst section "Other caveats
for MAC drivers", specifically it timestamps any skb which has
SKBTX_HW_TSTAMP, and does not consider if timestamping has been enabled
in adapter->hwtstamp_config.tx_type.
Evaluate the proper TX timestamping condition only once on the TX
path (in tsnep_xmit_frame_ring()) and store the result in an additional
TX entry flag. Evaluate the new TX entry flag in the TX confirmation path
(in tsnep_tx_poll()).
This way SKBTX_IN_PROGRESS is set by the driver as required, but never
evaluated. SKBTX_IN_PROGRESS shall not be evaluated as it can be set
by a stacked DSA driver and evaluating it would lead to unwanted
timestamps.
Fixes: 403f69bbdb ("tsnep: Add TSN endpoint Ethernet MAC driver")
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250514195657.25874-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
i.MX GPIO numbering has been deterministic since commit 7e6086d9e5
("gpio/mxc: specify gpio base for device tree probe"), a year after
device tree support was first added back in 2011.
Reverting to dynamically allocated GPIO base now would break most
systems making use of the sysfs API. These systems will be eventually
broken by the removal of the sysfs API, but that would result in GPIO
scripts not working instead of essentially toggling at random according
to probe order, which would happen if we unconditionally set base to -1.
Yet, the warning is annoying and has resulted in many rejected attempts
to remove it over the years[1][2][3].
As the i.MX GPIO driver is device tree only, GPIO_SYSFS is the only
consumer of the deterministic GPIO numbering. Let's therefore restrict the
static base and the warning that comes with it to configurations
with CONFIG_GPIO_SYSFS enabled.
[1]: https://lore.kernel.org/all/20230226205319.1013332-1-dario.binacchi@amarulasolutions.com/
[2]: https://lore.kernel.org/all/20230506085928.933737-2-haibo.chen@nxp.com/
[3]: https://lore.kernel.org/all/20241121145515.3087855-1-catalin.popescu@leica-geosystems.com/
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250507-b4-imx-gpio-base-warning-v2-1-d43d09e2c6bf@pengutronix.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Dunno why we still have .require_force_probe=1 on DG1 after
all this time. I'm not aware of any real problems with DG1,
so get rid of the force_probe requirement.
Generally the difficulty with DG1 is that it requires a
4GiB BAR for the local memory, and that's not something
that works on every system.
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250411144313.11660-3-ville.syrjala@linux.intel.com
The intel-media-driver is currently broken on DG1 because
it uses EXEC_CAPTURE with recovarable contexts. Relax the
check to allow that.
I've also submitted a fix for the intel-media-driver:
https://github.com/intel/media-driver/pull/1920
Cc: stable@vger.kernel.org # v6.0+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Testcase: igt/gem_exec_capture/capture-invisible
Fixes: 71b1669ea9 ("drm/i915/uapi: tweak error capture on recoverable contexts")
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250411144313.11660-2-ville.syrjala@linux.intel.com
Affinity-managed interrupts can be shut down and restarted during CPU
hotunplug/plug. Thereby the interrupt may be left in an unexpected state.
Specifically:
1. Interrupt is affine to CPU N
2. disable_irq() -> depth is 1
3. CPU N goes offline
4. irq_shutdown() -> depth is set to 1 (again)
5. CPU N goes online
6. irq_startup() -> depth is set to 0 (BUG! driver expects that the interrupt
still disabled)
7. enable_irq() -> depth underflow / unbalanced enable_irq() warning
This is only a problem for managed interrupts and CPU hotplug, all other
cases like request()/free()/request() truly needs to reset a possibly stale
disable depth value.
Provide a startup function, which takes the disable depth into account, and
invoked it for the managed interrupts in the CPU hotplug path.
This requires to change irq_shutdown() to do a depth increment instead of
setting it to 1, which allows to retain the disable depth, but is harmless
for the other code paths using irq_startup(), which will still reset the
disable depth unconditionally to keep the original correct behaviour.
A kunit tests will be added separately to cover some of these aspects.
[ tglx: Massaged changelog ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250514201353.3481400-2-briannorris@chromium.org
Use to_delayed_work() instead of open-coding it.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250514072419.2707578-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We cannot set frag_list to NULL pointer when alloc_page failed.
It will be used in tls_strp_check_queue_ok when the next time
tls_strp_read_sock is called.
This is because we don't reset full_len in tls_strp_flush_anchor_copy()
so the recv path will try to continue handling the partial record
on the next call but we dettached the rcvq from the frag list.
Alternative fix would be to reset full_len.
Unable to handle kernel NULL pointer dereference
at virtual address 0000000000000028
Call trace:
tls_strp_check_rcv+0x128/0x27c
tls_strp_data_ready+0x34/0x44
tls_data_ready+0x3c/0x1f0
tcp_data_ready+0x9c/0xe4
tcp_data_queue+0xf6c/0x12d0
tcp_rcv_established+0x52c/0x798
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Signed-off-by: Pengtao He <hept.hept.hept@gmail.com>
Link: https://patch.msgid.link/20250514132013.17274-1-hept.hept.hept@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GCC is not happy about a sprintf() call on a buffer that might be too small
for the given formatting string.
kernel/irq/debugfs.c:233:26: warning: 'sprintf' may write a terminating nul past the end of the destination [-Wformat-overflow=]
Fix this by bumping the size of the local variable for sprintf().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250515085516.2913290-1-andriy.shevchenko@linux.intel.com
Closes: https://lore.kernel.org/oe-kbuild-all/202505151057.xbyXAbEn-lkp@intel.com/
On multi-node GICv4.1 system, VSGI senders always use one certain 4_1 ITS,
because find_4_1_its() returns the first its_node in the list, regardless of
which node the VSGI sender is on. This brings guest VSGI performance drop
when VM is not running on the same node as this returned ITS.
On a 2-socket environment, each with one ITS and 32 cpu, GICv4.1 enabled,
4U8G guest, 4 vcpu is running on same socket.
When the VM is on socket0, kvm-unit-tests ipi_hw result is 850ns.
When the VM is on socket1, it is 750ns.
The reason is that the VSGI sender always uses the last reported ITS (that
on socket1) to inject VSGI. The access from a CPU to a other-socket ITS
will cost 100ns more compared to an access to the local ITS.
Using the local ITS results in a 12% reduction in IPI latency.
Modify find_4_1_its() to return the first per-CPU local_4_1_its, which is
initialized when the VPE table is inherited from the ITS or from another
CPU. If it fails to find a local 4_1 ITS, it returns any 4_1 ITS like
before.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250515145359.2795959-1-tangnianyao@huawei.com
Error recovery, PCIe AER, resume, and TX timeout will invoke bnxt_open()
with netdev_lock only. This will cause RTNL assert failure in
netif_set_real_num_tx_queues(), netif_set_real_num_tx_queues(),
and netif_set_real_num_tx_queues().
Example error recovery assert:
RTNL: assertion failed at net/core/dev.c (3178)
WARNING: CPU: 3 PID: 3392 at net/core/dev.c:3178 netif_set_real_num_tx_queues+0x1fd/0x210
Call Trace:
<TASK>
? __pfx_bnxt_msix+0x10/0x10 [bnxt_en]
__bnxt_open_nic+0x1ef/0xb20 [bnxt_en]
bnxt_open+0xda/0x130 [bnxt_en]
bnxt_fw_reset_task+0x21f/0x780 [bnxt_en]
process_scheduled_works+0x9d/0x400
For now, bring back rtnl_lock() in all these code paths that can invoke
bnxt_open(). In the bnxt_queue_start() error path, we don't have
rtnl_lock held so we just change it to call netif_close() instead of
bnxt_reset_task() for simplicity. This error path is unlikely so it
should be fine.
Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250514062908.2766677-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver only offloads neighbors that are constructed on top of net
devices registered by it or their uppers (which are all Ethernet). The
device supports GRE encapsulation and decapsulation of forwarded
traffic, but the driver will not offload dummy neighbors constructed on
top of GRE net devices as they are not uppers of its net devices:
# ip link add name gre1 up type gre tos inherit local 192.0.2.1 remote 198.51.100.1
# ip neigh add 0.0.0.0 lladdr 0.0.0.0 nud noarp dev gre1
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 NOARP
(Note that the neighbor is not marked with 'offload')
When the driver is reloaded and the existing configuration is replayed,
the driver does not perform the same check regarding existing neighbors
and offloads the previously added one:
# devlink dev reload pci/0000:01:00.0
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 offload NOARP
If the neighbor is later deleted, the driver will ignore the
notification (given the GRE net device is not its upper) and will
therefore keep referencing freed memory, resulting in a use-after-free
[1] when the net device is deleted:
# ip neigh del 0.0.0.0 lladdr 0.0.0.0 dev gre1
# ip link del dev gre1
Fix by skipping neighbor replay if the net device for which the replay
is performed is not our upper.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x1ea/0x200
Read of size 8 at addr ffff888155b0e420 by task ip/2282
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
mlxsw_sp_neigh_entry_update+0x1ea/0x200
mlxsw_sp_router_rif_gone_sync+0x2a8/0x440
mlxsw_sp_rif_destroy+0x1e9/0x750
mlxsw_sp_netdevice_ipip_ol_event+0x3c9/0xdc0
mlxsw_sp_router_netdevice_event+0x3ac/0x15e0
notifier_call_chain+0xca/0x150
call_netdevice_notifiers_info+0x7f/0x100
unregister_netdevice_many_notify+0xc8c/0x1d90
rtnl_dellink+0x34e/0xa50
rtnetlink_rcv_msg+0x6fb/0xb70
netlink_rcv_skb+0x131/0x360
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x121/0x1b0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 8fdb09a767 ("mlxsw: spectrum_router: Replay neighbours when RIF is made")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/c53c02c904fde32dad484657be3b1477884e9ad6.1747225701.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When starting the local sync timer to synchronize the state of a remote
CPU it should be added on the CPU to be synchronized, not the initiating
CPU. This results in interrupt delivery being delayed until the timer
eventually runs (due to another mask/unmask/migrate operation) on the
target CPU.
Fixes: 0f67911e82 ("irqchip/riscv-imsic: Separate next and previous pointers in IMSIC vector")
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/all/20250514171320.3494917-1-abrestic@rivosinc.com
Improve code readability by using bdev_is_zone_aligned() and
bdev_offset_from_zone_start() where applicable. No functionality
has been changed.
This patch is a reworked version of a patch from Pankaj Raghav.
See also https://lore.kernel.org/linux-block/20220923173618.6899-11-p.raghav@samsung.com/.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The function get_volume_page_protected may place a request on
a queue for another thread to process asynchronously. When this
happens, the volume should not read the request from the original
thread. This can not currently cause problems, due to the way
request processing is handled, but it is not safe in general.
Reviewed-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
If blk-throttle is enabled but blktrace is not, then the compiler will
notice that the following two variables are unused:
../block/blk-throttle.c: In function 'throtl_pending_timer_fn':
../block/blk-throttle.c:1153:30: warning: unused variable 'bio_cnt_w' [-Wunused-variable]
1153 | unsigned int bio_cnt_w = sq_queued(sq, WRITE);
| ^~~~~~~~~
../block/blk-throttle.c:1152:30: warning: unused variable 'bio_cnt_r' [-Wunused-variable]
1152 | unsigned int bio_cnt_r = sq_queued(sq, READ);
| ^~~~~~~~~
Silence that my annotating them with __maybe_unused.
Fixes: 28ad83b774 ("blk-throttle: Split the service queue")
Link: https://lore.kernel.org/all/20250515130830.9671-1-aishwarya.tcv@arm.com/
Reported-by: Aishwarya <aishwarya.tcv@arm.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 58d9a38f6f ("PCI: Skip attaching driver in device_add()"),
PCI enumeration is split into two steps: In the first step, all devices
are published in sysfs with device_add(). In the second step, drivers are
bound to the devices with device_attach(). To delay driver binding until
the second step, a "bool match_driver" in struct pci_dev is used.
Instead of a bool, use a bit in the "unsigned long priv_flags" to shrink
struct pci_dev a little and prevent use of the bool outside the PCI core
(as has happened with commit cbbc00be2c ("iommu/amd: Prevent binding
other PCI drivers to IOMMU PCI devices")).
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://patch.msgid.link/d22a9e5b81d6bd8dd1837607d6156679b3b1199c.1745572340.git.lukas@wunner.de
Commit 991de2e590 ("PCI, x86: Implement pcibios_alloc_irq() and
pcibios_free_irq()") changed IRQ handling on PCI driver probing.
It inadvertently broke resume from system sleep on AMD platforms:
https://lore.kernel.org/r/20150926164651.GA3640@pd.tnic/
This was fixed by two independent commits:
* 8affb487d4 ("x86/PCI: Don't alloc pcibios-irq when MSI is enabled")
* cbbc00be2c ("iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices")
The breaking change and one of these two fixes were subsequently reverted:
* fe25d07887 ("Revert "x86/PCI: Don't alloc pcibios-irq when MSI is enabled"")
* 6c777e8799 ("Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()"")
This rendered the second fix unnecessary, so revert it as well. It used
the match_driver flag in struct pci_dev, which is internal to the PCI core
and not supposed to be touched by arbitrary drivers.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://patch.msgid.link/9a3ddff5cc49512044f963ba0904347bd404094d.1745572340.git.lukas@wunner.de
rds_page_remainder is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Add a local_lock_t to the data structure and use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Cc: Allison Henderson <allison.henderson@oracle.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-16-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
rds_page_remainder_alloc() obtains the current CPU with get_cpu() while
disabling preemption. Then the CPU number is used to access the per-CPU
data structure via per_cpu().
This can be optimized by relying on local_bh_disable() to provide a
stable CPU number/ avoid migration and then using this_cpu_ptr() to
retrieve the data structure.
Cc: Allison Henderson <allison.henderson@oracle.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-15-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
rds_page_remainder_alloc() is invoked from a preemptible context or a
tasklet. There is no need to disable interrupts for locking.
Use local_bh_disable() instead of local_irq_save() for locking.
Cc: Allison Henderson <allison.henderson@oracle.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-14-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mptcp_delegated_actions is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT this data
structure requires explicit locking.
Add a local_lock_t to the data structure and use local_lock_nested_bh() for
locking. This change adds only lockdep coverage and does not alter the
functional behaviour for !PREEMPT_RT.
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Mat Martineau <martineau@kernel.org>
Cc: Geliang Tang <geliang@kernel.org>
Cc: mptcp@lists.linux.dev
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-13-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
sch_frag_data_storage is a per-CPU variable and relies on disabled BH
for its locking. Without per-CPU locking in local_bh_disable() on
PREEMPT_RT this data structure requires explicit locking.
Add local_lock_t to the struct and use local_lock_nested_bh() for locking.
This change adds only lockdep coverage and does not alter the functional
behaviour for !PREEMPT_RT.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-12-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mirred_nest_level is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Move mirred_nest_level to struct netdev_xmit as u8, provide wrappers.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/20250512092736.229935-11-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ovs_frag_data_storage is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Move ovs_frag_data_storage into the struct ovs_pcpu_storage which already
provides locking for the structure.
Cc: Aaron Conole <aconole@redhat.com>
Cc: Eelco Chaudron <echaudro@redhat.com>
Cc: Ilya Maximets <i.maximets@ovn.org>
Cc: dev@openvswitch.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250512092736.229935-10-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ovs_pcpu_storage is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
The data structure can be referenced recursive and there is a recursion
counter to avoid too many recursions.
Add a local_lock_t to the data structure and use
local_lock_nested_bh() for locking. Add an owner of the struct which is
the current task and acquire the lock only if the structure is not owned
by the current task.
Cc: Aaron Conole <aconole@redhat.com>
Cc: Eelco Chaudron <echaudro@redhat.com>
Cc: Ilya Maximets <i.maximets@ovn.org>
Cc: dev@openvswitch.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250512092736.229935-9-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
exec_actions_level is a per-CPU integer allocated at compile time.
action_fifos and flow_keys are per-CPU pointer and have their data
allocated at module init time.
There is no gain in splitting it, once the module is allocated, the
structures are allocated.
Merge the three per-CPU variables into ovs_pcpu_storage, adapt callers.
Cc: Aaron Conole <aconole@redhat.com>
Cc: Eelco Chaudron <echaudro@redhat.com>
Cc: Ilya Maximets <i.maximets@ovn.org>
Cc: dev@openvswitch.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250512092736.229935-8-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nat_keepalive_sk_ipv[46] is a per-CPU variable and relies on disabled BH
for its locking. Without per-CPU locking in local_bh_disable() on
PREEMPT_RT this data structure requires explicit locking.
Use sock_bh_locked which has a sock pointer and a local_lock_t. Use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-7-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
system_page_pool is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Make a struct with a page_pool member (original system_page_pool) and a
local_lock_t and use local_lock_nested_bh() for locking. This change
adds only lockdep coverage and does not alter the functional behaviour
for !PREEMPT_RT.
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-6-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hmac_storage is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Add a local_lock_t to the data structure and use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-5-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The statistics are incremented with raw_cpu_inc() assuming it always
happens with bottom half disabled. Without per-CPU locking in
local_bh_disable() on PREEMPT_RT this is no longer true.
Use this_cpu_inc() on PREEMPT_RT for the increment to not worry about
preemption.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-4-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
dst_cache::cache is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Add a local_lock_t to the data structure and use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-3-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With preemptible softirq and no per-CPU locking in local_bh_disable() on
PREEMPT_RT the consumer can be preempted while a skb is returned.
Avoid the race by disabling the recycle into the cache on PREEMPT_RT.
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-2-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With a u32 type, there's no need to check which one is greater: the
current is always the latest and if it's less than the previous, it's
because it wrapped: just do the unsigned calculation that will lead to
the same result, or better the correct one. It fixes an off-by-one in
the wrapped calculation, however that doesn't really matter for the
timeout calculation.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250513-time-wrap-v1-1-fba9a69a65c8@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
With the goal of reducing the need for drivers to touch (and dereference)
fence->ops, we change the prototype of __dma_fence_is_later() to take
fence instead of fence->ops.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250515095004.28318-2-tvrtko.ursulin@igalia.com
Signed-off-by: Christian König <christian.koenig@amd.com>
The NanoPi R5S has 4 GPIO LEDs, a RED one for SYStem power and 3 green
LEDs meant to indicate that a cable is connected to either of the
2.5GbE LAN ports or the 1GbE WAN port.
In the NanoPi R5S schematic (2204; page 19) as well as on the PCB and on
the case, SYS is used and not POWER. So replace 'power' with 'sys'.
But keep the 'power_led' label/phandle even though the kernel doesn't
use it, but it may be used outside of it.
The SYStem LED already had "heartbeat" as its default-trigger.
Set the default-trigger to "netdev" for the NICs so they will show when
LAN1/LAN2/WAN is connected and set their default-state to "off".
Also assign labels as close as possible to the labels on the case, while
still being descriptive enough in their own right.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250513170056.96259-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The newly added GRF types introduced kzalloc usage into the rk3528.
At least for the similar rk3576 driver, the kernel-test-robot reported the
missing prototype, which warranted adding a slab.h include.
While it did not complain about the rk3528, so the header might be included
"accidentially" right now, add a real include to make sure we keep it
included in the future.
Fixes: 306d2f5dda ("clk: rockchip: rk3528: Add SD/SDIO tuning clocks in GRF region")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250515082652.2503063-2-heiko@sntech.de
PP1516 are Touchscreen devices built around the PX30 SoC and companion
devices to PX30-Cobra, again with multiple display options.
The devices feature an EMMC, OTG port and a 720x1280 display with a
touchscreen and camera
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250514150745.2437804-7-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
