[ Upstream commit 2b94b054ac ]
dwc2 on most platforms needs phy controller, clock and power supply.
All of them must be enabled/activated to properly operate. If dwc2
is configured as peripheral mode, then all the above three hardware
resources are disabled at the end of the probe:
/* Gadget code manages lowlevel hw on its own */
if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
dwc2_lowlevel_hw_disable(hsotg);
But the dwc2_suspend() tries to read the dwc2's reg to check whether
is_device_mode or not, this would result in hang during suspend if dwc2
is configured as peripheral mode.
Fix this hang by bypassing suspend/resume if lowlevel hw isn't
enabled.
Fixes: 09a75e8577 ("usb: dwc2: refactor common low-level hw code to platform.c")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20251104002503.17158-3-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6ebcfdcac ]
dwc2 on most platforms needs phy controller, clock and power supply.
All of them must be enabled/activated to properly operate. If dwc2
is configured as peripheral mode, then all the above three hardware
resources are disabled at the end of the probe:
/* Gadget code manages lowlevel hw on its own */
if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
dwc2_lowlevel_hw_disable(hsotg);
But dwc2_driver_shutdown() tries to disable the interrupts on HW IP
level. This would result in hang during shutdown if dwc2 is configured
as peripheral mode.
Fix this hang by only disable and sync irq when lowlevel hw is enabled.
Fixes: 4fdf228cdf ("usb: dwc2: Fix shutdown callback in platform")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20251104002503.17158-2-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2fa8a12e6 ]
A failure to take a lock with O_NONBLOCK needs to result
in -EAGAIN. Change it.
Fixes: 66e3e59189 ("usb: Add driver for Altus Metrum ChaosKey device (v2)")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20251030093918.2248104-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 738c9738e6 ]
In ima_match_rules(), if ima_filter_rule_match() returns -ENOENT due to
the rule being NULL, the function incorrectly skips the 'if (!rc)' check
and sets 'result = true'. The LSM rule is considered a match, causing
extra files to be measured by IMA.
This issue can be reproduced in the following scenario:
After unloading the SELinux policy module via 'semodule -d', if an IMA
measurement is triggered before ima_lsm_rules is updated,
in ima_match_rules(), the first call to ima_filter_rule_match() returns
-ESTALE. This causes the code to enter the 'if (rc == -ESTALE &&
!rule_reinitialized)' block, perform ima_lsm_copy_rule() and retry. In
ima_lsm_copy_rule(), since the SELinux module has been removed, the rule
becomes NULL, and the second call to ima_filter_rule_match() returns
-ENOENT. This bypasses the 'if (!rc)' check and results in a false match.
Call trace:
selinux_audit_rule_match+0x310/0x3b8
security_audit_rule_match+0x60/0xa0
ima_match_rules+0x2e4/0x4a0
ima_match_policy+0x9c/0x1e8
ima_get_action+0x48/0x60
process_measurement+0xf8/0xa98
ima_bprm_check+0x98/0xd8
security_bprm_check+0x5c/0x78
search_binary_handler+0x6c/0x318
exec_binprm+0x58/0x1b8
bprm_execve+0xb8/0x130
do_execveat_common.isra.0+0x1a8/0x258
__arm64_sys_execve+0x48/0x68
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x44/0x200
el0t_64_sync_handler+0x100/0x130
el0t_64_sync+0x3c8/0x3d0
Fix this by changing 'if (!rc)' to 'if (rc <= 0)' to ensure that error
codes like -ENOENT do not bypass the check and accidentally result in a
successful match.
Fixes: 4af4662fa4 ("integrity: IMA policy")
Signed-off-by: Zhao Yipeng <zhaoyipeng5@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddb6e42494 ]
When running rtla as
`rtla <timerlat|osnoise> <top|hist> -t custom_file.txt -a 100`
-a options override trace output filename specified by -t option.
Running the command above will create <timerlat|osnoise>_trace.txt file
instead of custom_file.txt. Fix this by making sure that -a option does
not override trace output filename even if it's passed after trace
output filename is specified.
Fixes: 173a3b0148 ("rtla/timerlat: Add the automatic trace option")
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/b6ae60424050b2c1c8709e18759adead6012b971.1762186418.git.ipravdin.official@gmail.com
[ use capital letter in subject, as required by tracing subsystem ]
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34c170ae5c ]
osnoise test "top stop at failed action" is calling timerlat instead of
osnoise by mistake.
Fix it so that it calls the correct RTLA subcommand.
Fixes: 05b7e10687 ("tools/rtla: Add remaining support for osnoise actions")
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251007095341.186923-3-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d649e9f04c ]
In non-BPF mode, it takes up to 1 second for RTLA to notice that tracing
has been stopped. That means that action tests cannot have a 1 second
duration, as the SIGALRM will be racing with the threshold overflow.
Previously, non-BPF mode actions were buggy and always executed
the action, even when stopping on duration or SIGINT, preventing
this issue from manifesting. Now that this has been fixed, the tests
have become flaky, and this has to be adjusted.
Fixes: 4e26f84abf ("rtla/tests: Add tests for actions")
Fixes: 05b7e10687 ("tools/rtla: Add remaining support for osnoise actions")
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251007095341.186923-2-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05954511b7 ]
The ARM processor CPER record was added in UEFI v2.6 and remained
unchanged up to v2.10.
Yet, the original arm_event trace code added by
e9279e83ad ("trace, ras: add ARM processor error trace event")
is incomplete, as it only traces some fields of UAPI 2.6 table N.16, not
exporting any information from tables N.17 to N.29 of the record.
This is not enough for the user to be able to figure out what has
exactly happened or to take appropriate action.
According to the UEFI v2.9 specification chapter N2.4.4, the ARM
processor error section includes:
- several (ERR_INFO_NUM) ARM processor error information structures
(Tables N.17 to N.20);
- several (CONTEXT_INFO_NUM) ARM processor context information
structures (Tables N.21 to N.29);
- several vendor specific error information structures. The
size is given by Section Length minus the size of the other
fields.
In addition, it also exports two fields that are parsed by the GHES
driver when firmware reports it, e.g.:
- error severity
- CPU logical index
Report all of these information to userspace via a the ARM tracepoint so
that userspace can properly record the error and take decisions related
to CPU core isolation according to error severity and other info.
The updated ARM trace event now contains the following fields:
====================================== =============================
UEFI field on table N.16 ARM Processor trace fields
====================================== =============================
Validation handled when filling data for
affinity MPIDR and running
state.
ERR_INFO_NUM pei_len
CONTEXT_INFO_NUM ctx_len
Section Length indirectly reported by
pei_len, ctx_len and oem_len
Error affinity level affinity
MPIDR_EL1 mpidr
MIDR_EL1 midr
Running State running_state
PSCI State psci_state
Processor Error Information Structure pei_err - count at pei_len
Processor Context ctx_err- count at ctx_len
Vendor Specific Error Info oem - count at oem_len
====================================== =============================
It should be noted that decoding of tables N.17 to N.29, if needed, will
be handled in userspace. That gives more flexibility, as there won't be
any need to flood the kernel with micro-architecture specific error
decoding.
Also, decoding the other fields require a complex logic, and should be
done for each of the several values inside the record field. So, let
userspace daemons like rasdaemon decode them, parsing such tables and
having vendor-specific micro-architecture-specific decoders.
[mchehab: modified description, solved merge conflicts and fixed coding style]
Signed-off-by: Jason Tian <jason@os.amperecomputing.com>
Co-developed-by: Shengwei Luo <luoshengwei@huawei.com>
Signed-off-by: Shengwei Luo <luoshengwei@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Daniel Ferguson <danielf@os.amperecomputing.com> # rebased
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Fixes: e9279e83ad ("trace, ras: add ARM processor error trace event")
Link: https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#arm-processor-error-section
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b647d2574e ]
The rtl8187_rx_cb() calculates the rx descriptor header address
by subtracting its size from the skb tail pointer.
However, it does not validate if the received packet
(skb->len from urb->actual_length) is large enough to contain this
header.
If a truncated packet is received, this will lead to a buffer
underflow, reading memory before the start of the skb data area,
and causing a kernel panic.
Add length checks for both rtl8187 and rtl8187b descriptor headers
before attempting to access them, dropping the packet cleanly if the
check fails.
Fixes: 6f7853f3cb ("rtl8187: change rtl8187_dev.c to support RTL8187B (part 2)")
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251118013258.1789949-2-eeodqql09@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23b2d2fb13 ]
When booting with KASAN enabled the following splat is
encountered during probe of the k1 clock driver:
UBSAN: array-index-out-of-bounds in drivers/clk/spacemit/ccu-k1.c:1044:16
index 0 is out of range for type 'clk_hw *[*]'
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.0-rc5+ #1 PREEMPT(lazy)
Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2022.10spacemit 10/01/2022
Call Trace:
[<ffffffff8002b628>] dump_backtrace+0x28/0x38
[<ffffffff800027d2>] show_stack+0x3a/0x50
[<ffffffff800220c2>] dump_stack_lvl+0x5a/0x80
[<ffffffff80022100>] dump_stack+0x18/0x20
[<ffffffff800164b8>] ubsan_epilogue+0x10/0x48
[<ffffffff8099034e>] __ubsan_handle_out_of_bounds+0xa6/0xa8
[<ffffffff80acbfa6>] k1_ccu_probe+0x37e/0x420
[<ffffffff80b79e6e>] platform_probe+0x56/0x98
[<ffffffff80b76a7e>] really_probe+0x9e/0x350
[<ffffffff80b76db0>] __driver_probe_device+0x80/0x138
[<ffffffff80b76f52>] driver_probe_device+0x3a/0xd0
[<ffffffff80b771c4>] __driver_attach+0xac/0x1b8
[<ffffffff80b742fc>] bus_for_each_dev+0x6c/0xc8
[<ffffffff80b76296>] driver_attach+0x26/0x38
[<ffffffff80b759ae>] bus_add_driver+0x13e/0x268
[<ffffffff80b7836a>] driver_register+0x52/0x100
[<ffffffff80b79a78>] __platform_driver_register+0x28/0x38
[<ffffffff814585da>] k1_ccu_driver_init+0x22/0x38
[<ffffffff80023a8a>] do_one_initcall+0x62/0x2a0
[<ffffffff81401c60>] do_initcalls+0x170/0x1a8
[<ffffffff81401e7a>] kernel_init_freeable+0x16a/0x1e0
[<ffffffff811f7534>] kernel_init+0x2c/0x180
[<ffffffff80025f56>] ret_from_fork_kernel+0x16/0x1d8
[<ffffffff81205336>] ret_from_fork_kernel_asm+0x16/0x18
---[ end trace ]---
This is bogus and is simply a result of KASAN consulting the
`.num` member of the struct for bounds information (as it should
due to `__counted_by`) and finding 0 set by kzalloc() because it
has not been initialized before the loop that fills in the array.
The easy fix is to just move the line that sets `num` to before
the loop that fills the array so that KASAN has the information
it needs to accurately conclude that the access is valid.
Fixes: 1b72c59db0 ("clk: spacemit: Add clock support for SpacemiT K1 SoC")
Tested-by: Yanko Kaneti <yaneti@declera.com>
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1bcaed1e3 ]
Currently, the check for whether a partition is populated does not
account for tasks in the cpuset of attaching. This is a corner case
that can leave a task stuck in a partition with no effective CPUs.
The race condition occurs as follows:
cpu0 cpu1
//cpuset A with cpu N
migrate task p to A
cpuset_can_attach
// with effective cpus
// check ok
// cpuset_mutex is not held // clear cpuset.cpus.exclusive
// making effective cpus empty
update_exclusive_cpumask
// tasks_nocpu_error check ok
// empty effective cpus, partition valid
cpuset_attach
...
// task p stays in A, with non-effective cpus.
To fix this issue, this patch introduces cs_is_populated, which considers
tasks in the attaching cpuset. This new helper is used in validate_change
and partition_is_populated.
Fixes: e2d59900d9 ("cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bccaf1fe08 ]
Value CRSM_SFT_PD written to Software Power-Down Control Register
(CRSM_SFT_PD_CNTRL) is 0x01 and therefor different to value
CRSM_SFT_PD_RDY (0x02) read from System Status Register (CRSM_STAT) for
confirmation powerdown has been reached.
The condition could have only worked when disabling powerdown
(both 0x00), but never when enabling it (0x01 != 0x02).
Result is a timeout, like so:
$ ifdown eth0
macb f802c000.ethernet eth0: Link is Down
ADIN1100 f802c000.ethernet-ffffffff:01: adin_set_powerdown_mode failed: -110
ADIN1100 f802c000.ethernet-ffffffff:01: adin_set_powerdown_mode failed: -110
Fixes: 7eaf913299 ("net: phy: adin1100: Add initial support for ADIN1100 industrial PHY")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20251119124737.280939-2-ada@thorsis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d088da9042 ]
subtest_kmem_cache_iter_check_slabinfo() fundamentally compares slab
cache names parsed out from /proc/slabinfo against those stored within
struct kmem_cache_result. The current problem is that the slab cache
name within struct kmem_cache_result is stored within a bounded
fixed-length array (sized to SLAB_NAME_MAX(32)), whereas the name
parsed out from /proc/slabinfo is not. Meaning, using ASSERT_STREQ()
can certainly lead to test failures, particularly when dealing with
slab cache names that are longer than SLAB_NAME_MAX(32)
bytes. Notably, kmem_cache_create() allows callers to create slab
caches with somewhat arbitrarily sized names via its __name identifier
argument, so exceeding the SLAB_NAME_MAX(32) limit that is in place
now can certainly happen.
Make subtest_kmem_cache_iter_check_slabinfo() more reliable by only
checking up to sizeof(struct kmem_cache_result.name) - 1 using
ASSERT_STRNEQ().
Fixes: a496d0cdc8 ("selftests/bpf: Add a test for kmem_cache_iter")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/20251118073734.4188710-1-mattbobrowski@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3508311f2e ]
The property name is "mipi-sdca-RxUMP-ownership-transition-max-delay",
with a dash between max and delay. Add the missing dash.
Fixes: 13ef21dffe ("ASoC: SDCA: add support for HIDE entity properties and HID descriptor/report")
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-3-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8daaced9f5 ]
Due to its relatively low frequency, a noise stemming from the 24MHz PLL
reference clock may traverse the low-pass loop filter of ROPLL, which
could potentially generate some HDMI flash artifacts.
Reduce ROPLL loop bandwidth in an attempt to mitigate the problem.
Fixes: 553be2830c ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver")
Co-developed-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251028-phy-hdptx-fixes-v1-2-ecc642a59d94@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72126e9623 ]
When making use of the clock provider functionality, the output clock
does normally match the TMDS character rate, which is what the PHY PLL
gets configured to.
However, this is only applicable for default color depth of 8 bpc. For
higher depths, the output clock is further divided by the hardware
according to the formula:
output_clock_rate = tmds_char_rate * 8 / bpc
Since the existence of the clock divider wasn't taken into account when
support for high bpc has been introduced, make the necessary adjustments
to report the correct clock rate.
Fixes: 9d0ec51d7c ("phy: rockchip: samsung-hdptx: Add high color depth management")
Reported-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251028-phy-hdptx-fixes-v1-1-ecc642a59d94@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be866e6896 ]
When PCIe link enters L1 PM substates, the PHY will turn off its
PLL for power-saving. However, it turns off the PLL too fast which
leads the PHY to be broken. According to the PHY document, we need
to delay PLL turnoff time.
Fixes: f13bff2516 ("phy: rockchip-naneng-combo: Support rk3562")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/1763459526-35004-2-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2a18e5da6 ]
When PCIe link enters L1 PM substates, the PHY will turn off its
PLL for power-saving. However, it turns off the PLL too fast which
leads the PHY to be broken. According to the PHY document, we need
to delay PLL turnoff time.
Fixes: bbcca4fac8 ("phy: rockchip: naneng-combphy: Add RK3528 support")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/1763459526-35004-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 662bb179d3 ]
If an error occurs after the reset_control_deassert(),
reset_control_assert() must be called, as already done in the remove
function.
Use devm_add_action_or_reset() to add the missing call and simplify the
.remove() function accordingly.
While at it, drop struct rcar_gen3_chan::rstc as it is not used aymore.
[claudiu.beznea: removed "struct reset_control *rstc = data;" from
rcar_gen3_reset_assert(), dropped struct rcar_gen3_chan::rstc]
Fixes: 4eae163753 ("phy: renesas: rcar-gen3-usb2: Add support to initialize the bus")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251023135810.1688415-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 072cd5f458 ]
The PWM signal from the LPG channel can be routed to PMIC GPIOs with
proper GPIO configuration, and it is not necessary to enable the
TRILED channel in that case. This also applies to the LPG channels
that mapped to TRILED channels. Additionally, enabling the TRILED
channel unnecessarily would cause a voltage increase in its power
supply. Hence remove it.
Fixes: 24e2d05d1b ("leds: Add driver for Qualcomm LPG")
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251119-lpg_triled_fix-v3-2-84b6dbdc774a@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c85da64ce2 ]
When reading the fdt_size value, the argument passed to dt_mem_next_cell()
is dt_root_addr_cells, but it should be dt_root_size_cells.
The same issue occurs when reading the scratch_size value.
Use a helper function to simplify the code and fix these issues.
Fixes: 274cdcb1c0 ("arm64: add KHO support")
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Link: https://patch.msgid.link/20251115134753.179931-5-yuntao.wang@linux.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 463942de13 ]
The len value is in bytes, while `dt_root_addr_cells + dt_root_size_cells`
is in cells (4 bytes per cell). Modulo calculation between them is
incorrect, the units must be converted first.
Use helper functions to simplify the code and fix this issue.
Fixes: fb319e77a0 ("of: fdt: Add memory for devices by DT property "linux,usable-memory-range"")
Fixes: 2af2b50acf ("of: fdt: Add generic support for handling usable memory range property")
Fixes: 8f579b1c4e ("arm64: limit memory regions based on DT property, usable-memory-range")
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Link: https://patch.msgid.link/20251115134753.179931-4-yuntao.wang@linux.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bec5f6092b ]
The len value is in bytes, while `dt_root_addr_cells + dt_root_size_cells`
is in cells (4 bytes per cell). Comparing them directly is incorrect.
Use a helper function to simplify the code and address this issue.
Fixes: f7e7ce93aa ("of: fdt: Add generic support for handling elf core headers property")
Fixes: e62aaeac42 ("arm64: kdump: provide /proc/vmcore file")
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Link: https://patch.msgid.link/20251115134753.179931-3-yuntao.wang@linux.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8278cb72c6 ]
Currently, there are many pieces of nearly identical code scattered across
different places. Consolidate the duplicate code into helper functions to
improve maintainability and reduce the likelihood of errors.
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Link: https://patch.msgid.link/20251115134753.179931-2-yuntao.wang@linux.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Stable-dep-of: bec5f6092b ("of/fdt: Fix the len check in early_init_dt_check_for_elfcorehdr()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 384bd58bf7 ]
If devm_request_threaded_irq() fails after irq_domain_add_linear()
succeeds in mt6358_irq_init(), the function returns without removing
the created IRQ domain, leading to a resource leak.
Call irq_domain_remove() in the error path after a successful
irq_domain_add_linear() to properly release the IRQ domain.
Fixes: 2b91c28f2a ("mfd: Add support for the MediaTek MT6358 PMIC")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251118121427.583-1-vulab@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4b1bd1f33 ]
If devm_request_threaded_irq() fails after irq_domain_create_linear()
succeeds in mt6397_irq_init(), the function returns without removing
the created IRQ domain, leading to a resource leak.
Call irq_domain_remove() in the error path after a successful
irq_domain_create_linear() to properly release the IRQ domain.
Fixes: a4872e80ce ("mfd: mt6397: Extract IRQ related code from core driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251118121500.605-1-vulab@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 417bd0d502 ]
Commit 8d933d5c89 ("rtla/timerlat: Add continue action") moved the
code performing on-threshold actions (enabled through --on-threshold
option) to inside the RTLA main loop.
The condition in the loop does not check whether the threshold was
actually exceeded or if stop tracing was requested by the user through
SIGINT or duration. This leads to a bug where on-threshold actions are
always performed, even when the threshold was not hit.
(BPF mode is not affected, since it uses a different condition in the
while loop.)
Add a condition that checks for !stop_tracing before executing the
actions. Also, fix incorrect brackets in hist_main_loop to match the
semantics of top_main_loop.
Fixes: 8d933d5c89 ("rtla/timerlat: Add continue action")
Fixes: 2f3172f9dd ("tools/rtla: Consolidate code between osnoise/timerlat and hist/top")
Reviewed-by: Crystal Wood <crwood@redhat.com>
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251007095341.186923-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4275b2301 ]
In recently introduced timerlat_free(),
the variable 'nr_cpus' is not assigned.
Assign it with sysconf(_SC_NPROCESSORS_CONF) as done elsewhere.
Remove the culprit: -Wno-maybe-uninitialized. The rest of the
code is clean.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Fixes: 2f3172f9dd ("tools/rtla: Consolidate code between osnoise/timerlat and hist/top")
Link: https://lore.kernel.org/r/20251002170846.437888-1-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 353cda30d3 ]
The called hash functions could fail thus we should check return values.
Fixes: 26717828b7 ("mac80211: aes-cmac: switch to shash CMAC driver")
Signed-off-by: Chien Wong <m@xv97.com>
Link: https://patch.msgid.link/20251113140511.48658-2-m@xv97.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b38a108ee ]
Invalidation hint (ih) in the function 'qi_desc_iotlb' is initialized
to zero and never used. It is embedded in the 0th bit of the 'addr'
parameter. Get the correct 'ih' value from there.
Fixes: f701c9f36b ("iommu/vt-d: Factor out invalidation descriptor composition")
Signed-off-by: Aashish Sharma <aashish@aashishsharma.net>
Link: https://lore.kernel.org/r/20251009010903.1323979-1-aashish@aashishsharma.net
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb3db5a39e ]
INTEL_IOMMU_FLOPPY_WA workaround was introduced to create direct mappings
for first 16MB for floppy devices as the floppy drivers were not using
dma apis. We need not do this direct map if floppy driver is not
enabled.
INTEL_IOMMU_FLOPPY_WA is generally not a good idea. Iommu will be
mapping pages in this address range while kernel would also be
allocating from this range(mostly on memory stress). A misbehaving
device using this domain will have access to the pages that the
kernel might be actively using. We noticed this while running a test
that was trying to figure out if any pages used by kernel is in iommu
page tables.
This patch reduces the scope of the above issue by disabling the
workaround when floppy driver is not enabled. But we would still need to
fix the floppy driver to use dma apis so that we need not do direct map
without reserving the pages. Or the other option is to reserve this
memory range in firmware so that kernel will not use the pages.
Fixes: d850c2ee5f ("iommu/vt-d: Expose ISA direct mapping region via iommu_get_resv_regions")
Fixes: 49a0429e53 ("Intel IOMMU: Iommu floppy workaround")
Signed-off-by: Vineeth Pillai (Google) <vineeth@bitbyteword.org>
Link: https://lore.kernel.org/r/20251002161625.1155133-1-vineeth@bitbyteword.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e982441ba ]
The control flow in rtl8211f_config_init() has some pitfalls which were
probably unintended. Specifically it has an early return:
switch (phydev->interface) {
...
default: /* the rest of the modes imply leaving delay as is. */
return 0;
}
which exits the entire config_init() function. This means it also skips
doing things such as disabling CLKOUT or disabling PHY-mode EEE.
For the RTL8211FS, which uses PHY_INTERFACE_MODE_SGMII, this might be a
problem. However, I don't know that it is, so there is no Fixes: tag.
The issue was observed through code inspection.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251117234033.345679-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78b1a242fe ]
In qla2xxx_process_purls_iocb(), an item is allocated via
qla27xx_copy_multiple_pkt(), which internally calls
qla24xx_alloc_purex_item().
The qla24xx_alloc_purex_item() function may return a pre-allocated item
from a per-adapter pool for small allocations, instead of dynamically
allocating memory with kzalloc().
An error handling path in qla2xxx_process_purls_iocb() incorrectly uses
kfree() to release the item. If the item was from the pre-allocated
pool, calling kfree() on it is a bug that can lead to memory corruption.
Fix this by using the correct deallocation function,
qla24xx_free_purex_item(), which properly handles both dynamically
allocated and pre-allocated items.
Fixes: 875386b988 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251113151246.762510-1-zilin@seu.edu.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0ee72db91 ]
This fixes the dme-reset failed when doing recovery. Because device
reset is not enough, we could occasionally see the error below:
ufshcd-rockchip 2a2d0000.ufs: uic cmd 0x14 with arg3 0x0 completion timeout
ufshcd-rockchip 2a2d0000.ufs: dme-reset: error code -110
ufshcd-rockchip 2a2d0000.ufs: DME_RESET failed
ufshcd-rockchip 2a2d0000.ufs: ufshcd_host_reset_and_restore: Host init failed -110
Fix this by resetting the controller on PRE_CHANGE stage of hce enable
notify.
Fixes: d3cbe455d6 ("scsi: ufs: rockchip: Initial support for UFS")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/1763009575-237552-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cda323dbda ]
The .free callback cleared among others the enable bit PWENx in the
control register. When the PWM is requested later again this bit isn't
restored but the core assumes the PWM is enabled and thus skips a
request to configure the same state as before.
To fix that don't touch the hardware configuration in .free(). For
symmetry also drop .request() and configure the mode completely in
.apply().
Fixes: e5a06dc5ac ("pwm: Add BCM2835 PWM driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251118174303.1761577-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33e1fffea4 ]
The operation subclass is extracted from bits [7..1] of the payload.
Since bit [0] is not parsed, there is no chance to match the memset type
(0x25). As a result, the memset payload is never parsed successfully.
Instead of extracting a unified bit field, change to extract the
specific bits for each operation subclass.
Fixes: 34fb60400e ("perf arm-spe: Add raw decoding for SPEv1.3 MTE and MOPS load/store")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f72514b3c5 ]
When an IPv6 Router Advertisement (RA) is received for a prefix, the
kernel creates the corresponding on-link route with flags RTF_ADDRCONF
and RTF_PREFIX_RT configured and RTF_EXPIRES if lifetime is set.
If later a user configures a static IPv6 address on the same prefix the
kernel clears the RTF_EXPIRES flag but it doesn't clear the RTF_ADDRCONF
and RTF_PREFIX_RT. When the next RA for that prefix is received, the
kernel sees the route as RA-learned and wrongly configures back the
lifetime. This is problematic because if the route expires, the static
address won't have the corresponding on-link route.
This fix clears the RTF_ADDRCONF and RTF_PREFIX_RT flags preventing that
the lifetime is configured when the next RA arrives. If the static
address is deleted, the route becomes RA-learned again.
Fixes: 14ef37b6d0 ("ipv6: fix route lookup in addrconf_prefix_rcv()")
Reported-by: Garri Djavadyan <g.djavadyan@gmail.com>
Closes: https://lore.kernel.org/netdev/ba807d39aca5b4dcf395cc11dca61a130a52cfd3.camel@gmail.com/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20251115095939.6967-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9813cd23d ]
The previous code initialized the 'reg' value with specific bus-width
values (BUS_WIDTH_2_BIT and BUS_WIDTH_4_BIT), which introduces ambiguity.
Replace them with BUS_WIDTH_MASK to express the intention clearly.
Fixes: de16c322ee ("spi: sophgo: add SG2044 SPI NOR controller driver")
Signed-off-by: Longbin Li <looong.bin@gmail.com>
Link: https://patch.msgid.link/20251117090559.78288-1-looong.bin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca04ce7a2f ]
Current logic assumes that the voltage corners in both MxG and MxA are
always same. This is not true for recent targets. So, rework the rpmh init
sequence to probe and calculate the votes with the respective rails, ie,
GX rails should use MxG as secondary rail and Cx rail should use MxA as
the secondary rail.
Fixes: d6225e0cd0 ("drm/msm/adreno: Add support for X185 GPU")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689014/
Message-ID: <20251118-kaana-gpu-support-v4-12-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff7a6de043 ]
Correct the register offset and enable this workaround for all A7x
and newer GPUs to match the recommendation. Also, downstream does this
w/a after moving the fence to allow mode. So do the same.
Fixes: dbfbb376b5 ("drm/msm/a6xx: Add A621 support")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/688997/
Message-ID: <20251118-kaana-gpu-support-v4-3-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 180349b840 ]
As per the recommendation, A7x and newer GPUs should flush the LRZ cache
before switching the pagetable. Update a6xx_set_pagetable() to do this.
While we are at it, sync both BV and BR before issuing a
CP_RESET_CONTEXT_STATE command, to match the downstream sequence.
Fixes: af66706acc ("drm/msm/a6xx: Add skeleton A7xx support")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/688995/
Message-ID: <20251118-kaana-gpu-support-v4-2-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20ac36b71c ]
if matrixbit is 11,
The range of color matrix is from 0 to (BIT(12) - 1).
Values from 0 to (BIT(11) - 1) represent positive numbers,
values from BIT(11) to (BIT(12) - 1) represent negative numbers.
For example, -1 need converted to 8191.
so convert S31.32 to HW Q2.11 format by drm_color_ctm_s31_32_to_qm_n,
and set int_bits to 2.
Fixes: 738ed4156f ("drm/mediatek: Add matrix_bits private data for ccorr")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jay Liu <jay.liu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250921055416.25588-2-jay.liu@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccc4e86d1c ]
If a rb node with the same ino already exists in the rb tree, the newly
alloced mft_inode in ni_add_subrecord() will not have its memory cleaned
up, which leads to the memory leak issue reported by syzbot.
The best option to avoid this issue is to put the newly alloced mft node
when a rb node with the same ino already exists in the rb tree and return
the rb node found in the rb tree to the parent layer.
syzbot reported:
BUG: memory leak
unreferenced object 0xffff888110bef280 (size 128):
backtrace (crc 126a088f):
ni_add_subrecord+0x31/0x180 fs/ntfs3/frecord.c:317
ntfs_look_free_mft+0xf0/0x790 fs/ntfs3/fsntfs.c:715
BUG: memory leak
unreferenced object 0xffff888109093400 (size 1024):
backtrace (crc 7197c55e):
mi_init+0x2b/0x50 fs/ntfs3/record.c:105
mi_format_new+0x40/0x220 fs/ntfs3/record.c:422
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Reported-by: syzbot+3932ccb896e06f7414c9@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d78d1173a ]
After ntfs_look_free_mft() executes successfully, all subsequent code
that fails to execute must put mi.
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9db257236 ]
When the "rx-vlan-filter" feature is enabled on a network device, the 8021q
module automatically adds a VLAN 0 hardware filter when the device is
brought administratively up.
For stmmac, this causes vlan_add_hw_rx_fltr() to create a new entry for
VID 0 in the mac_device_info->vlan_filter array, in the following format:
VLAN_TAG_DATA_ETV | VLAN_TAG_DATA_VEN | vid
Here, VLAN_TAG_DATA_VEN indicates that the hardware filter is enabled for
that VID.
However, on the delete path, vlan_del_hw_rx_fltr() searches the vlan_filter
array by VID only, without verifying whether a VLAN entry is enabled. As a
result, when the 8021q module attempts to remove VLAN 0, the function may
mistakenly match a zero-initialized slot rather than the actual VLAN 0
entry, causing incorrect deletions and leaving stale entries in the
hardware table.
Fix this by verifying that the VLAN entry's enable bit (VLAN_TAG_DATA_VEN)
is set before matching and deleting by VID. This ensures only active VLAN
entries are removed and avoids leaving stale entries in the VLAN filter
table, particularly for VLAN ID 0.
Fixes: ed64639bc1 ("net: stmmac: Add support for VLAN Rx filtering")
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20251113112721.70500-2-ovidiu.panait.rb@renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eae40a6da6 ]
HPTE format was changed since Power9 (ISA 3.0) onwards. While dumping
kernel hash page tables, nothing gets printed on powernv P9+. This patch
utilizes the helpers added in the patch tagged as fixes, to convert new
format to old format and dump the hptes. This fix is only needed for
native_find() (powernv), since pseries continues to work fine with the
old format.
Fixes: 6b243fcfb5 ("powerpc/64: Simplify adaptation to new ISA v3.00 HPTE format")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/4c2bb9e5b3cfbc0dd80b61b67cdd3ccfc632684c.1761834163.git.ritesh.list@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17b45ccf09 ]
When HV=0 & IR/DR=0, the Hash MMU is said to be in Virtual Real
Addressing Mode during early boot. During this, we should ensure that
memory region allocations for stress_hpt_struct should happen from
within RMA region as otherwise the boot might get stuck while doing
memset of this region.
History behind why do we have RMA region limitation is better explained
in these 2 patches [1] & [2]. This patch ensures that memset to
stress_hpt_struct during early boot does not cross ppc64_rma_size
boundary.
[1]: https://lore.kernel.org/all/20190710052018.14628-1-sjitindarsingh@gmail.com/
[2]: https://lore.kernel.org/all/87wp54usvj.fsf@linux.vnet.ibm.com/
Fixes: 6b34a099fa ("powerpc/64s/hash: add stress_hpt kernel boot option to increase hash faults")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/ada1173933ea7617a994d6ee3e54ced8797339fc.1761834163.git.ritesh.list@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dc211c115 ]
Syzkaller triggers an invalid memory access issue following fault
injection in update_effective_progs. The issue can be described as
follows:
__cgroup_bpf_detach
update_effective_progs
compute_effective_progs
bpf_prog_array_alloc <-- fault inject
purge_effective_progs
/* change to dummy_bpf_prog */
array->items[index] = &dummy_bpf_prog.prog
---softirq start---
__do_softirq
...
__cgroup_bpf_run_filter_skb
__bpf_prog_run_save_cb
bpf_prog_run
stats = this_cpu_ptr(prog->stats)
/* invalid memory access */
flags = u64_stats_update_begin_irqsave(&stats->syncp)
---softirq end---
static_branch_dec(&cgroup_bpf_enabled_key[atype])
The reason is that fault injection caused update_effective_progs to fail
and then changed the original prog into dummy_bpf_prog.prog in
purge_effective_progs. Then a softirq came, and accessing the members of
dummy_bpf_prog.prog in the softirq triggers invalid mem access.
To fix it, skip updating stats when stats is NULL.
Fixes: 492ecee892 ("bpf: enable program stats")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20251115102343.2200727-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
