It can be removed since svc_fill_write_vector already has the
same WARN_ON_ONCE.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NFSD currently has two separate code paths for handling read
requests. One uses page splicing; the other is a traditional read
based on an iov iterator.
Because most Linux file systems support splice read, the latter
does not get nearly the same test experience as splice reads.
To force the use of vectored reads for testing and benchmarking,
introduce the ability to disable splice reads for all NFS READ
operations.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Create a small sandbox under /sys/kernel/debug for experimental NFS
server feature settings. There is no API/ABI compatibility guarantee
for these settings.
The only documentation for such settings, if any documentation exists,
is in the kernel source code.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
As of now nfsd calls create_proc_exports_entry() at start of init_nfsd
and cleanup by remove_proc_entry() at last of exit_nfsd.
Which causes kernel OOPs if there is race between below 2 operations:
(i) exportfs -r
(ii) mount -t nfsd none /proc/fs/nfsd
for 5.4 kernel ARM64:
CPU 1:
el1_irq+0xbc/0x180
arch_counter_get_cntvct+0x14/0x18
running_clock+0xc/0x18
preempt_count_add+0x88/0x110
prep_new_page+0xb0/0x220
get_page_from_freelist+0x2d8/0x1778
__alloc_pages_nodemask+0x15c/0xef0
__vmalloc_node_range+0x28c/0x478
__vmalloc_node_flags_caller+0x8c/0xb0
kvmalloc_node+0x88/0xe0
nfsd_init_net+0x6c/0x108 [nfsd]
ops_init+0x44/0x170
register_pernet_operations+0x114/0x270
register_pernet_subsys+0x34/0x50
init_nfsd+0xa8/0x718 [nfsd]
do_one_initcall+0x54/0x2e0
CPU 2 :
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
PC is at : exports_net_open+0x50/0x68 [nfsd]
Call trace:
exports_net_open+0x50/0x68 [nfsd]
exports_proc_open+0x2c/0x38 [nfsd]
proc_reg_open+0xb8/0x198
do_dentry_open+0x1c4/0x418
vfs_open+0x38/0x48
path_openat+0x28c/0xf18
do_filp_open+0x70/0xe8
do_sys_open+0x154/0x248
Sometimes it crashes at exports_net_open() and sometimes cache_seq_next_rcu().
and same is happening on latest 6.14 kernel as well:
[ 0.000000] Linux version 6.14.0-rc5-next-20250304-dirty
...
[ 285.455918] Unable to handle kernel paging request at virtual address 00001f4800001f48
...
[ 285.464902] pc : cache_seq_next_rcu+0x78/0xa4
...
[ 285.469695] Call trace:
[ 285.470083] cache_seq_next_rcu+0x78/0xa4 (P)
[ 285.470488] seq_read+0xe0/0x11c
[ 285.470675] proc_reg_read+0x9c/0xf0
[ 285.470874] vfs_read+0xc4/0x2fc
[ 285.471057] ksys_read+0x6c/0xf4
[ 285.471231] __arm64_sys_read+0x1c/0x28
[ 285.471428] invoke_syscall+0x44/0x100
[ 285.471633] el0_svc_common.constprop.0+0x40/0xe0
[ 285.471870] do_el0_svc_compat+0x1c/0x34
[ 285.472073] el0_svc_compat+0x2c/0x80
[ 285.472265] el0t_32_sync_handler+0x90/0x140
[ 285.472473] el0t_32_sync+0x19c/0x1a0
[ 285.472887] Code: f9400885 93407c23 937d7c27 11000421 (f86378a3)
[ 285.473422] ---[ end trace 0000000000000000 ]---
It reproduced simply with below script:
while [ 1 ]
do
/exportfs -r
done &
while [ 1 ]
do
insmod /nfsd.ko
mount -t nfsd none /proc/fs/nfsd
umount /proc/fs/nfsd
rmmod nfsd
done &
So exporting interfaces to user space shall be done at last and
cleanup at first place.
With change there is no Kernel OOPs.
Co-developed-by: Shubham Rana <s9.rana@samsung.com>
Signed-off-by: Shubham Rana <s9.rana@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
With rpc_status netlink support, unregister of register_filesystem()
was missed in case of genl_register_family() fails.
Correcting it by making new label.
Fixes: bd9d6a3efa ("NFSD: add rpc_status netlink support")
Cc: stable@vger.kernel.org
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When cache cleanup runs concurrently with cache entry removal, a race
condition can occur that leads to incorrect nextcheck times. This can
delay cache cleanup for the cache_detail by up to 1800 seconds:
1. cache_clean() sets nextcheck to current time plus 1800 seconds
2. While scanning a non-empty bucket, concurrent cache entry removal can
empty that bucket
3. cache_clean() finds no cache entries in the now-empty bucket to update
the nextcheck time
4. This maybe delays the next scan of the cache_detail by up to 1800
seconds even when it should be scanned earlier based on remaining
entries
Fix this by moving the hash_lock acquisition earlier in cache_clean().
This ensures bucket emptiness checks and nextcheck updates happen
atomically, preventing the race between cleanup and entry removal.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The cache_detail structure uses a "nextcheck" field to control hash table
scanning intervals. When a table scan begins, nextcheck is set to current
time plus 1800 seconds. During scanning, if cache_detail is not empty and
a cache entry's expiry time is earlier than the current nextcheck, the
nextcheck is updated to that expiry time.
This mechanism ensures that:
1) Empty cache_details are scanned every 1800 seconds to avoid unnecessary
scans
2) Non-empty cache_details are scanned based on the earliest expiry time
found
However, when adding a new cache entry to an empty cache_detail, the
nextcheck time was not being updated, remaining at 1800 seconds. This
could delay cache cleanup for up to 1800 seconds, potentially blocking
threads(such as nfsd) that are waiting for cache cleanup.
Fix this by updating the nextcheck time whenever a new cache entry is
added.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Help the client resolve the race between the reply to an
asynchronous COPY reply and the associated CB_OFFLOAD callback by
planting the session, slot, and sequence number of the COPY in the
CB_SEQUENCE contained in the CB_OFFLOAD COMPOUND.
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The slot index number of the current COMPOUND has, until now, not
been needed outside of nfsd4_sequence(). But to record the tuple
that represents a referring call, the slot number will be needed
when processing subsequent operations in the COMPOUND.
Refactor the code that allocates a new struct nfsd4_slot to ensure
that the new sl_index field is always correctly initialized.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
We have yet to implement a mechanism in NFSD for resolving races
between a server's reply and a related callback operation. For
example, a CB_OFFLOAD callback can race with the matching COPY
response. The client will not recognize the copy state ID in the
CB_OFFLOAD callback until the COPY response arrives.
Trond adds:
> It is also needed for the same kind of race with delegation
> recalls, layout recalls, CB_NOTIFY_DEVICEID and would also be
> helpful (although not as strongly required) for CB_NOTIFY_LOCK.
RFC 8881 Section 20.9.3 describes referring call lists this way:
> The csa_referring_call_lists array is the list of COMPOUND
> requests, identified by session ID, slot ID, and sequence ID.
> These are requests that the client previously sent to the server.
> These previous requests created state that some operation(s) in
> the same CB_COMPOUND as the csa_referring_call_lists are
> identifying. A session ID is included because leased state is tied
> to a client ID, and a client ID can have multiple sessions. See
> Section 2.10.6.3.
Introduce the XDR infrastructure for populating the
csa_referring_call_lists argument of CB_SEQUENCE. Subsequent patches
will put the referring call list to use.
Note that cb_sequence_enc_sz estimates that only zero or one rcl is
included in each CB_SEQUENCE, but the new infrastructure can
manage any number of referring calls.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Try not to prolong the wait for completion of a COPY or COPY_NOTIFY
operation.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Update the status of an async COPY operation when it has been
stopped. OFFLOAD_STATUS needs to indicate that the COPY is no longer
running.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The v6.15 PR contained the transition to "qcom,calibration-variant" and
was not accepted due to the risk of breaking bisection support. Merge
the arm32-for-6.15 tag in order to bring these patches into v6.16.
Enable the Focaltech FT8719 touchscreen controller used in the Poco F1
(EBBG) panel variant.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Link: https://lore.kernel.org/r/20250506-pocof1-touchscreen-support-v4-4-bfb53da52945@joelselvaraj.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the Novatek NT36672A touchscreen controller used in the Poco F1
(Tianma) panel variant.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Link: https://lore.kernel.org/r/20250506-pocof1-touchscreen-support-v4-3-bfb53da52945@joelselvaraj.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable qupv3_id_1 and gpi_dma1 as they are required for configuring
touchscreen. Also add pinctrl configurations needed for touchscreen.
These are common for both the tianma and ebbg touchscreen variant.
In the subsequent patches, we will enable support for the Novatek NT36672a
touchscreen and FocalTech FT8719 touchscreen that are used in the Poco F1
Tianma and EBBG panel variant respectively. This is done in preparation
for that.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Link: https://lore.kernel.org/r/20250506-pocof1-touchscreen-support-v4-2-bfb53da52945@joelselvaraj.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the unique ID for Qualcomm SM8750 SoC.
This value is used to differentiate the SoC across qcom targets.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250508134635.1627031-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some comments in Rust files use raw URLs (http://example.com) rather
than Markdown autolinks <URL>. This inconsistency makes the
documentation less uniform and harder to maintain.
This patch converts all remaining raw URLs in Rust code comments to use
the Markdown autolink format, maintaining consistency with the rest of
the codebase which already uses this style.
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1153
Signed-off-by: Xizhe Yin <xizheyin@smail.nju.edu.cn>
Link: https://lore.kernel.org/r/509F0B66E3C1575D+20250407033441.5567-1-xizheyin@smail.nju.edu.cn
[ Used From form for Signed-off-by. Sorted tags. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
We track the details of which Rust features we use at our usual "live
list" [1] (and its sub-lists), but in light of a discussion in the LWN
article [2], it would help to clarify it in the source code.
In particular, we are very close to rely only on stable Rust language-wise
-- essentially only two language features remain (including the `kernel`
crate).
Thus add some details in both the feature list of the `kernel` crate as
well as the list of allowed features.
This does not over every single feature, and there are quite a few
non-language features that we use too. To have the full picture, please
refer to [1].
Link: https://github.com/Rust-for-Linux/linux/issues/2 [1]
Link: https://lwn.net/Articles/1015409/ [2]
Suggested-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250327211302.286313-1-ojeda@kernel.org
[ Improved comments with suggestions from the list. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `kernel` prelude brings `Result` and the error codes; and the prelude
itself is already available in the examples automatically.
In addition, `Result` already defaults to `T = ()`.
Thus simplify.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250429151445.438977-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add an optional panic message to the `static_assert!` macro.
The panic message doesn't support argument formatting, because the
`assert!` macro only supports formatting in non-const contexts.
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1149
Signed-off-by: Altan Ozlu <altan@ozlu.eu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20250326202520.1176162-2-altan@ozlu.eu
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Sometimes kernel developers use `//` for documenting private items,
since those do not get rendered at the moment.
That is reasonable, but the intention behind `///` (and `//!`) vs. `//`
is to convey the distinction between documentation and other kinds of
comments, such as implementation details or TODOs.
It also increases consistency with the public items and thus e.g. allows
to change visibility of an item with less changes involved.
It is not just useful for human readers, but also tooling. For instance,
we may want to eventually generate documentation for private items
(perhaps as a toggle in the HTML UI). On top of that, `rustdoc` lints
as usual for those, too, so we may want to do it even if we do not use
the result.
Thus document this explicitly.
Link: https://lore.kernel.org/rust-for-linux/CANiq72n_C7exSOMe5yf-7jKKnhSCv+a9QcD=OE2B_Q2UFBL3Xg@mail.gmail.com/
Link: https://github.com/Rust-for-Linux/linux/issues/1157
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20250416112454.2503872-1-ojeda@kernel.org
[ Fixed typo. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When build the kernel using the llvm-18.1.3-rust-1.85.0-x86_64
with ARCH=arm64, the following symbols are generated:
$nm vmlinux | grep ' _R'.*Page | rustfilt
ffff8000805b6f98 T <kernel::page::Page>::alloc_page
ffff8000805b715c T <kernel::page::Page>::fill_zero_raw
ffff8000805b720c T <kernel::page::Page>::copy_from_user_slice_raw
ffff8000805b6fb4 T <kernel::page::Page>::read_raw
ffff8000805b7088 T <kernel::page::Page>::write_raw
ffff8000805b72fc T <kernel::page::Page as core::ops::drop::Drop>::drop
These Rust symbols(alloc_page and drop) are trivial wrappers around the C
functions alloc_pages and __free_pages. It doesn't make sense to go
through a trivial wrapper for these functions, so mark them inline.
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Kunwu Chan <kunwu.chan@hotmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250321080124.484647-1-kunwu.chan@linux.dev
[ Removed spurious colon in title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Back when display support was added initially to CRD, and we used to have
two separate compatibles for eDP and DP, it was supposed to override the
DP compatible with the eDP one in the board specific devicetree. Since
then, the DP driver has been reworked to figure out the eDP/DP at runtime
while only DP compatible remained in the end.
Even though the override does nothing basically, drop it to avoid
further confusion. Drop it from all X Elite based platforms.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250509-x1e80100-dts-drop-useless-dp-compatible-override-v2-1-126db05cb70a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
After some digging in downstream sources, it was found that the vddio_disp
regulator's output voltage is 1.8V. This is further confirmed by the
troubleshooting guide. Specify its output voltage as such.
While at it, add a comment specifying the IC, which according to the
schematic is the TI TPS22902.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/6143603464a65aebbed281fe6c6164316dd07269.1746711762.git.stano.jakubek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
After some digging in downstream sources, it was found that the TPS65132
outputs are fixed to +5.4V and -5.4V respectively. This is further confirmed
on runtime through debugfs, the troubleshooting guide confirms this as well.
Specify these limits as such.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/b67ed6c7813fa52cf00b473dded9b5042102f593.1746711762.git.stano.jakubek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
While the currently supported hardware works fine with the default clock
frequencies of 100000 on both I2C2 and I2C3, downstream sources list the
frequencies as 100000 for I2C2 and 400000 for I2C3. Update them as such.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/5a8191e3758e0df78b4213102f25ceadc28cd427.1746711762.git.stano.jakubek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use a single DRIVER_VERSION for the plat, hsmp and acpi modules,
as all these modules are connected to a common functionality.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20250506101542.200811-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Clang warns (or errors with CONFIG_WERROR=y):
drivers/platform/mellanox/nvsw-sn2201.c:531:32: error: variable 'nvsw_sn2201_busbar_items' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
531 | static struct mlxreg_core_item nvsw_sn2201_busbar_items[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~
nvsw_sn2201_busbar_items is only used in ARRAY_SIZE(), which uses
sizeof(), so this variable is only used at compile time. It appears that
this may be a copy and paste issue, so use nvsw_sn2201_busbar_items as
the .items member in nvsw_sn2201_busbar_hotplug, clearing up the
warning.
Fixes: 56b0bb7f90 ("platform: mellanox: nvsw-sn2200: Add support for new system flavour")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250509-nvsw-sn2200-fix-items-busbar-hotplug-v1-1-8844fff38dc8@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
* Avoid use of uninitialized memcache pointer in user_mem_abort()
* Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts
to be taken while TGE=0 and fixing an ugly bug on AmpereOne that
occurs when taking an interrupt while clearing the xMO bits
(AC03_CPU_36)
* Prevent VMMs from hiding support for AArch64 at any EL virtualized by
KVM
* Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
* Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
* Add missing reset of smstateen CSRs
x86:
* Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid causing
problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to sanitize the
VMCB as its state is undefined after SHUTDOWN, emulating INIT is the
least awful choice).
* Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
* Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a stale
root.
* When dumping GHCB state, use KVM's snapshot instead of the raw GHCB page
to print state, so that KVM doesn't print stale/wrong information.
* When changing memory attributes (e.g. shared <=> private), add potential
hugepage ranges to the mmu_invalidate_range_{start,end} set so that KVM
doesn't create a shared/private hugepage when the the corresponding
attributes will become mixed (the attributes are commited *after* KVM
finishes the invalidation).
* Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM has at
least one active VM. Effectively BP_SPEC_REDUCE when KVM is loaded led
to very measurable performance regressions for non-KVM workloads.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmgfbqAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNAywf+J9Ux+RccM8K2my3REQn7Z6WwMevX
CYgvdYBGt79AG8mjMKMfISzRDo3PrTi9wr+mEHfCpJ1F7CZTec/qdGY61tIjOhnE
86A5EoJcaoWhZcl4ubtQwRc//ENapwb6qI5uy10Nt30KTqS1S38M7FcZLvTYBYBx
A1Xehcnc8NOsOvXMyHvnsAi/X+yvj/wUfzETfzt5CFg8s9MHnmEFWlP+oOgNggbR
TKJVIvD0CTQR8lmdEcJYDrgWfhUsRq8qZyPAO37SoAn1tWfYAcpUUHEH2t2C6waW
shqmRx0HLshhbIWgySU2AdRx6Q3iyMIPSmTvzUhATEhEzM/IDk/DZstOyQ==
=aJFD
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing
interrupts to be taken while TGE=0 and fixing an ugly bug on
AmpereOne that occurs when taking an interrupt while clearing the
xMO bits (AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized
by KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
- Add missing reset of smstateen CSRs
x86:
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid
causing problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to
sanitize the VMCB as its state is undefined after SHUTDOWN,
emulating INIT is the least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a
stale root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB
page to print state, so that KVM doesn't print stale/wrong
information.
- When changing memory attributes (e.g. shared <=> private), add
potential hugepage ranges to the mmu_invalidate_range_{start,end}
set so that KVM doesn't create a shared/private hugepage when the
the corresponding attributes will become mixed (the attributes are
commited *after* KVM finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM
has at least one active VM. Effectively BP_SPEC_REDUCE when KVM is
loaded led to very measurable performance regressions for non-KVM
workloads"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Set/clear SRSO's BP_SPEC_REDUCE on 0 <=> 1 VM count transitions
KVM: arm64: Fix memory check in host_stage2_set_owner_locked()
KVM: arm64: Kill HCRX_HOST_FLAGS
KVM: arm64: Properly save/restore HCRX_EL2
KVM: arm64: selftest: Don't try to disable AArch64 support
KVM: arm64: Prevent userspace from disabling AArch64 support at any virtualisable EL
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort()
KVM: x86/mmu: Prevent installing hugepages when mem attributes are changing
KVM: SVM: Update dump_ghcb() to use the GHCB snapshot fields
KVM: RISC-V: reset smstateen CSRs
KVM: x86/mmu: Check and free obsolete roots in kvm_mmu_reload()
KVM: x86: Check that the high 32bits are clear in kvm_arch_vcpu_ioctl_run()
KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ibsn
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix a boot regression on very old x86 CPUs without CPUID support"
* tag 'x86-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Consolidate the loader enablement checking
- Fix time keeping bugs in CLOCK_MONOTONIC_COARSE clocks
- Work around absolute relocations into vDSO code that
GCC erroneously emits in certain arm64 build environments
- Fix a false positive lockdep warning in the i8253 clocksource
driver
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ndox
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc timers fixes from Ingo Molnar:
- Fix time keeping bugs in CLOCK_MONOTONIC_COARSE clocks
- Work around absolute relocations into vDSO code that GCC erroneously
emits in certain arm64 build environments
- Fix a false positive lockdep warning in the i8253 clocksource driver
* tag 'timers-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/i8253: Use raw_spinlock_irqsave() in clockevent_i8253_disable()
arm64: vdso: Work around invalid absolute relocations from GCC
timekeeping: Prevent coarse clocks going backwards
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell
Precision M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaCBDmQAKCRBAj56VGEWX
nA13AQCmVOo2PAJU2CtMxqwEVZMat0id/fk0Ro8aiW8JBzyzuwD/as/hMtOkAGyI
pUsaxLp7SlOUMq9YFlkbC/Ffe2GH2QQ=
=yrk/
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes
* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
Input: xpad - fix two controller table values
Input: hisi_powerkey - enable system-wakeup for s2idle
Input: synaptics - enable InterTouch on Dell Precision M3800
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Input: mtk-pmic-keys - fix possible null pointer dereference
Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
Input: cyttsp5 - fix power control issue on wakeup
MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
Input: stmpe-ts - use module alias instead of device table
Input: cyttsp5 - ensure minimum reset pulse width
Input: sparcspkr - avoid unannotated fall-through
input/joystick: magellan: Mark __nonstring look-up table
* Mark set_high_memory() as __init to fix section mismatch
* Accept memory allocated in memblock_double_array() to mitigate crash of SNP
guests
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmggNRQQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kXrCCACyy+Q+LakMWEeq4hzbYJUtyEGzSAZgYm4j
YX/fW1zgxiYgQHeYJI0fFt9RGMpbT62KWF/43sAS9HnucNWwVZKGVPct00JKe2Eb
aDMmU3HuoILuTxF1D1h3eFzX3yyM9bVIUZBOiJqzVlYH5i6NHydGhBaGFL4EZWV5
65z2pA/6nS3pNFc564T25su3gK/J/i5aYXpqhn6MHwY7QIbQhPndNu5k+UuoIQI+
Cbk0dxgx5hvJZJ45SpGuTzCx/Di6GWMRGl4XJD7VX3uJi4FrDjPEfyT6j39qtpLx
RsuiS/9iG4Y0ew1bAnQrCNlTTS/HInWJ6yV4ggdy/Cu2j/Qv7kLr
=CLPd
-----END PGP SIGNATURE-----
Merge tag 'fixes-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
- Mark set_high_memory() as __init to fix section mismatch
- Accept memory allocated in memblock_double_array() to mitigate crash
of SNP guests
* tag 'fixes-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Accept allocated memory before use in memblock_double_array()
mm,mm_init: Mark set_high_memory as __init
As described, the analogix-dp controller on rk3588 only supports 2 clocks
and the edp0 node handles that correctly.
The edp1 node on the other hand seems to have a dangling 3rd clock called
spdif, that probably only exists in the vendor-tree.
As that is not handled at all, remove it for now so that we adhere to the
binding.
Fixes: a481bb0b1a ("arm64: dts: rockchip: Add eDP1 dt node for rk3588")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250509152329.2004073-1-heiko@sntech.de
RK3562 is a SoC from Rockchip, which embedded with quad
ARM Cortex-A53.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Link: https://lore.kernel.org/r/20250509102308.761424-5-kever.yang@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
s/devince/device/
It's used only internally, so no any behavior changes.
Fixes: 37e0e14128 ("ALSA: ump: Support UMP Endpoint and Function Block parsing")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250511141147.10246-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
