- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmgcsdUACgkQ+mJfZA7r
E8rYqAf/citknZ0aTAOw7+O8581v6/27BsmRYO8T2JvhHWr3RIOeowgyEQ9M3m6y
jBM5qIsGH0JOrDMVDjvuVlfm+JAPRxVABo3GXTpUIu94xszwco+5iQNnHBui0NrP
AnAauh/MZC6YKmTzNVBHW35N+JQJ9clmK6Rf5Bzb8pVP1bPRwRFSpgefHBeimRRY
qeQlqEVfvst5gkQiTe2b/5ydErPB7WfBY4WHGrgykBPt0+3t7Zln3Dqbdm9vB7+p
zEHXQNvX75KGFimUgCf7mU2Hoov0LI1/cazeG1dbv6gczXOUySwIKRIuqKNJ6XsG
PSV0X8Hc1ppL4Sp1Oe/WAdwE2k/xxw==
=rvsI
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2025-05-08' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Non-display related:
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aByyL3bEufPu79OM@intel.com
The use of the demangle-ocaml APIs means we don't detect if a different
demangler is used before the OCaml one for the case that matters to
perf.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Ariel Ben-Yehuda <ariel.byd@gmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Bill Wendling <morbo@google.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20250430004128.474388-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The use of the demangle-java APIs means we don't detect if a different
demangler is used before the Java one for the case that matters to
perf.
Remove the return types from the demangled names as dso__demangle_sym()
removes those.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Ariel Ben-Yehuda <ariel.byd@gmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Bill Wendling <morbo@google.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20250430004128.474388-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test cases are listed examples in:
https://doc.rust-lang.org/rustc/symbol-mangling/v0.html
This test was previously part of a different Rust v0 demangler:
https://lore.kernel.org/lkml/20250129193037.573431-1-irogers@google.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Ariel Ben-Yehuda <ariel.byd@gmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Bill Wendling <morbo@google.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20250430004128.474388-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding link info test for ref_ctr_offset retrieval for both
uprobe and uretprobe probes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20250509153539.779599-3-jolsa@kernel.org
Adding support to retrieve ref_ctr_offset for uprobe perf link,
which got somehow omitted from the initial uprobe link info changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20250509153539.779599-2-jolsa@kernel.org
Use the demangle-rust-v0 APIs to see if symbol is Rust mangled and
demangle if so.
The API requires a pre-allocated output buffer, some estimation and
retrying are added for this.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Ariel Ben-Yehuda <ariel.byd@gmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Bill Wendling <morbo@google.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20250430004128.474388-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Imported at commit 80e40f57d99f ("add comment about finding latest
version of code") from:
https://github.com/rust-lang/rustc-demangle/blob/main/crates/native-c/src/demangle.chttps://github.com/rust-lang/rustc-demangle/blob/main/crates/native-c/include/demangle.h
There is discussion of this issue motivating the import in:
https://github.com/rust-lang/rust/issues/60705https://lore.kernel.org/lkml/20250129193037.573431-1-irogers@google.com/
The SPDX lines reflect the dual license Apache-2 or MIT in:
https://github.com/rust-lang/rustc-demangle/blob/main/README.md
Following Migual Ojeda's suggestion comments were added on copyright and
keeping the code in sync with upstream.
The files are renamed as perf supports multiple demanglers and so
demangle as a name would be overloaded.
The work here was done by Ariel Ben-Yehuda <ariel.byd@gmail.com> and I
am merely importing it as discussed in the rust-lang issue.
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Ariel Ben-Yehuda <ariel.byd@gmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Bill Wendling <morbo@google.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20250430004128.474388-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add ROCK 5B+, which is an improved version of the ROCK 5B with the
following changes:
* Memory LPDDR4X -> LPDDR5
* HDMI input connector size
* eMMC socket -> onboard
* M.2 E-Key is replaced by onboard RTL8852BE WLAN/BT
* M.2 M-Key 1x4 lanes is replaced by 2x2 lanes
* Added M.2 B-Key for USB connected WWAN modules (untested)
* Add second camera port (not yet supported in upstream Linux)
* Add dedicated USB-C port for device power (no impact in DT;
the existing port has not been changed and the new port is
handled by CH224D standalone chip)
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250508-rock5bp-for-upstream-v2-4-677033cc1ac2@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Radxa ROCK 5B+ is an improved version of the ROCK 5B.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250508-rock5bp-for-upstream-v2-3-677033cc1ac2@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Radxa released some more boards, which are based on the original
Rock 5B. Move its board description into an include file to avoid
unnecessary duplication.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250508-rock5bp-for-upstream-v2-1-677033cc1ac2@kernel.org
Link: https://lore.kernel.org/r/20250508-rock5bp-for-upstream-v2-2-677033cc1ac2@kernel.org
[The original submission was split into two elements, renaming the file
and then moving some nodes around. This was done to make review easier
due to the diff being smaller. This commit is a squash of both of them
to facilitate bisectability and was also intended by the original author]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RK3576 uses Rockchip SAI for audio output. Meanwhile, the Sige5
board, which uses the RK3576 and is supported by mainline, uses an
ES8388 codec over I2C with the ES8328 driver implementing support for
this codec.
Enable both in the defconfig.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250506-rk3576-sai-v4-5-a8b5f5733ceb@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
drm:
- Fix overflow when generating wedged event
ttm:
- Fix documentation
- Remove struct ttm_backup
panel:
- simple: Fix timings for AUO G101EVN010
amdgpu:
- DC FP fixes
- Freesync fix
- DMUB AUX fixes
- VCN fix
- Hibernation fixes
- HDP fixes
xe:
- Prevent PF queue overflow
- Hold all forcewake during mocs test
- Remove GSC flush on reset path
- Fix forcewake put on error path
- Fix runtime warning when building without svm
i915:
- Fix oops on resume after disconnecting DP MST sinks during suspend
- Fix SPLC num_waiters refcounting
ivpu:
- Increase timeouts
- Fix deadlock in cmdq ioctl
- Unlock mutices in correct order
v3d:
- Avoid memory leak in job handling
-----BEGIN PGP SIGNATURE-----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=50os
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-05-10' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, bit bigger than last week, but overall amdgpu/xe
with some ivpu bits and a random few fixes, and dropping the
ttm_backup struct which wrapped struct file and was recently
frowned at.
drm:
- Fix overflow when generating wedged event
ttm:
- Fix documentation
- Remove struct ttm_backup
panel:
- simple: Fix timings for AUO G101EVN010
amdgpu:
- DC FP fixes
- Freesync fix
- DMUB AUX fixes
- VCN fix
- Hibernation fixes
- HDP fixes
xe:
- Prevent PF queue overflow
- Hold all forcewake during mocs test
- Remove GSC flush on reset path
- Fix forcewake put on error path
- Fix runtime warning when building without svm
i915:
- Fix oops on resume after disconnecting DP MST sinks during suspend
- Fix SPLC num_waiters refcounting
ivpu:
- Increase timeouts
- Fix deadlock in cmdq ioctl
- Unlock mutices in correct order
v3d:
- Avoid memory leak in job handling"
* tag 'drm-fixes-2025-05-10' of https://gitlab.freedesktop.org/drm/kernel: (32 commits)
drm/i915/dp: Fix determining SST/MST mode during MTP TU state computation
drm/xe: Add config control for svm flush work
drm/xe: Release force wake first then runtime power
drm/xe/gsc: do not flush the GSC worker from the reset path
drm/xe/tests/mocs: Hold XE_FORCEWAKE_ALL for LNCF regs
drm/xe: Add page queue multiplier
drm/amdgpu/hdp7: use memcfg register to post the write for HDP flush
drm/amdgpu/hdp6: use memcfg register to post the write for HDP flush
drm/amdgpu/hdp5.2: use memcfg register to post the write for HDP flush
drm/amdgpu/hdp5: use memcfg register to post the write for HDP flush
drm/amdgpu/hdp4: use memcfg register to post the write for HDP flush
drm/amdgpu: fix pm notifier handling
Revert "drm/amd: Stop evicting resources on APUs in suspend"
drm/amdgpu/vcn: using separate VCN1_AON_SOC offset
drm/amd/display: Fix wrong handling for AUX_DEFER case
drm/amd/display: Copy AUX read reply data whenever length > 0
drm/amd/display: Remove incorrect checking in dmub aux handler
drm/amd/display: Fix the checking condition in dmub aux handling
drm/amd/display: Shift DMUB AUX reply command if necessary
drm/amd/display: Call FP Protect Before Mode Programming/Mode Support
...
With the hdmi_sound node added to the base RK3576 SoC tree, we can now
enable it on the Sige5 SBC.
Do this, and also enable the corresponding SAI6 audio controller node.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250506-rk3576-sai-v4-4-a8b5f5733ceb@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The ArmSoM Sige5 board features an Everest ES8388 codec to provide
analog stereo audio output, as well as analog audio input. The codec
hangs off the i2c2 bus and responds to address 0x10. It is connected to
the SAI1 audio controller of the RK3576, with one SDO (output) lane and
one SDI (input) lane.
The codec has two sets of outputs. One set, LOUT1/ROUT1, is connected
through a set of 22uF non-polarised coupling capacitors to a 3-position
connector that appears to be a clone of the JST BM03B-SURS-TF header,
and is capable of mating with a JST 03SUR-32S (or JST 03SUR-36L if you
prefer lemon-lime) or compatible clone connector. The right headphone
output is the one closest to the Type-C DC input connector, the left
headphone output is the one in the middle, and the third position, the
one closest to the USB3 Type-A host connector, is puzzingly labelled as
"HP_GND" in the schematic but is in fact connected to the codecs RIN1
input through a 1uF non-plarised coupling capacitor.
LOUT2 and ROUT2 are routed to 1mm test pads T36 and T37 respectively.
These are located on the bottom of the board, and do not go through any
coupling capacitor. For use as line out, the ES8388 datasheet recommends
adding 1uF coupling capacitor if one wishes to use it as a line-level
output.
There is also a pair of inputs for a stereo microphone, going from two
1mm testpads T34 and T35, which are decoupled with a 100pF capacitor and
pulled to 3.3v and ground respectively. These inputs then go through 1uF
capacitors each and end up in the LINPUT2 and RINPUT2 pins of the
ES8388 codec.
The codec's power inputs are routed to receive 3.3V for both its analog
and digital inputs, though from different supplies.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250506-rk3576-sai-v4-3-a8b5f5733ceb@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RK3576 SoC now has upstream support for HDMI.
Add an HDMI audio node, which uses SAI6 as its audio controller
according to downstream.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250506-rk3576-sai-v4-2-a8b5f5733ceb@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RK3576 SoC has 10 SAI controllers in total. Five of them are in the
video output power domains, and are used for digital audio output along
with the video signal of those, e.g. HDMI audio.
The other five, SAI0 through SAI4, are exposed externally. SAI0 and SAI1
are capable of 8-channel audio, whereas SAI2, SAI3 and SAI4 are limited
to two channels. These five are in the audio power domain.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250506-rk3576-sai-v4-1-a8b5f5733ceb@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK3528 features two SDIO controllers and one SD/MMC controller, describe
them in devicetree. Since their sample and drive clocks are located in
the VO and VPU GRFs, corresponding syscons are added to make these
clocks available.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250508234829.27111-3-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A single call to einj_get_available_error_type() in init function is
sufficient to save the return value in a global variable to be used
later in various places in the code.
This change has no functional impact, but only removes unnecessary
redundant function calls.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Zaid Alali <zaidal@os.amperecomputing.com>
Link: https://patch.msgid.link/20250506213814.2365788-5-zaidal@os.amperecomputing.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add the TUXEDO InfinityBook Pro AMD Gen9 to the acpi_ec_no_wakeup[]
quirk list to prevent spurious wakeups.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20250508111625.12149-1-wse@tuxedocomputers.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are applications that have it hard coded to write into the top level
trace_marker instance (/sys/kernel/tracing/trace_marker). This can be
annoying if a profiler is using that instance for other work, or if it
needs all writes to go into a new instance.
A new option is created called "copy_trace_marker". By default, the top
level has this set, as that is the default buffer that writing into the
top level trace_marker file will go to. But now if an instance is created
and sets this option, all writes into the top level trace_marker will also
be written into that instance buffer just as if an application were to
write into the instance's trace_marker file.
If the top level instance disables this option, then writes to its own
trace_marker and trace_marker_raw files will not go into its buffer.
If no instance has this option set, then the write will return an error
and errno will contain ENODEV.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250508095639.39f84eda@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a helper function called handle_dereference_arg() to replace the logic
that is identical in two locations of test_event_printk().
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250507191703.5dd8a61d@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's several functions that have "goto out;" where the label out is just:
out:
return ret;
Simplify the code by just doing the return in the location and removing
all the out labels and jumps.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://lore.kernel.org/20250507145456.121186494@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
According to trigger_data_alloc() doc, trigger_data_free() should be
used to free an event_trigger_data object. This fixes a mismatch introduced
when kzalloc was replaced with trigger_data_alloc without updating
the corresponding deallocation calls.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://lore.kernel.org/20250507145455.944453325@goodmis.org
Link: https://lore.kernel.org/20250318112737.4174-1-linmq006@gmail.com
Fixes: e1f187d09e ("tracing: Have existing event_command.parse() implementations use helpers")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
[ SDR: Changed event_trigger_alloc/free() to trigger_data_alloc/free() ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function event_trigger_alloc() creates an event_trigger_data
descriptor and states that it needs to be freed via event_trigger_free().
This is incorrect, it needs to be freed by trigger_data_free() as
event_trigger_free() adds ref counting.
Rename event_trigger_alloc() to trigger_data_alloc() and state that it
needs to be freed via trigger_data_free(). This naming convention
was introducing bugs.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://lore.kernel.org/20250507145455.776436410@goodmis.org
Fixes: 86599dbe2c ("tracing: Add helper functions to simplify event_command.parse() callback handling")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The trace_array_cpu had a "buffer_page" field that was originally going to
be used as a backup page for the ring buffer. But the ring buffer has its
own way of reusing pages and this field was never used.
Remove it.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212236.738849456@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The irqsoff tracer uses the per CPU "disabled" field to prevent corruption
of the accounting when it starts to trace interrupts disabled, but there's
a slight race that could happen if for some reason it was called twice.
Use atomic_inc_return() instead.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212236.567884756@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The per CPU "disabled" counter is used for the latency tracers and stack
tracers to make sure that their accounting isn't messed up by an NMI or
interrupt coming in and affecting the same CPU data. But the counter is an
atomic_t type. As it only needs to synchronize against the current CPU,
switch it over to local_t type.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212236.394925376@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The branch tracer currently checks the per CPU "disabled" field to know if
tracing is enabled or not for the CPU. As the "disabled" value is not used
anymore to turn of tracing generically, use tracing_tracer_is_on_cpu()
instead.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212236.224658526@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add the function ring_buffer_record_is_on_cpu() that returns true if the
ring buffer for a give CPU is writable and false otherwise.
Also add tracer_tracing_is_on_cpu() to return if the ring buffer for a
given CPU is writeable for a given trace_array.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212236.059853898@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The per CPU "disabled" value was the original way to disable tracing when
the tracing subsystem was first created. Today, the ring buffer
infrastructure has its own way to disable tracing. In fact, things have
changed so much since 2008 that many things ignore the disable flag.
Do not bother setting the per CPU disabled flag of the array_buffer data
to use to determine what CPUs can write to the buffer and only rely on the
ring buffer code itself to disabled it.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212235.885452497@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The per CPU "disabled" value was the original way to disable tracing when
the tracing subsystem was first created. Today, the ring buffer
infrastructure has its own way to disable tracing. In fact, things have
changed so much since 2008 that many things ignore the disable flag.
Do not bother disabling the function graph tracer if the per CPU disabled
field is set. Just record as normal. If tracing is disabled in the ring
buffer it will not be recorded.
Also, when tracing is enabled again, it will not drop the return call of
the function.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212235.715752008@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The per CPU "disabled" value was the original way to disable tracing when
the tracing subsystem was first created. Today, the ring buffer
infrastructure has its own way to disable tracing. In fact, things have
changed so much since 2008 that many things ignore the disable flag.
The kdb_ftdump() function iterates over all the current tracing CPUs and
increments the "disabled" counter before doing the dump, and decrements it
afterward.
As the disabled flag can be ignored, doing this today is not reliable.
Instead, simply call tracer_tracing_off() and then tracer_tracing_on() to
disable and then enabled the entire ring buffer in one go!
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Thompson <danielt@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/20250505212235.549033722@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The per CPU "disabled" value was the original way to disable tracing when
the tracing subsystem was first created. Today, the ring buffer
infrastructure has its own way to disable tracing. In fact, things have
changed so much since 2008 that many things ignore the disable flag.
The ftrace_dump_one() function iterates over all the current tracing CPUs and
increments the "disabled" counter before doing the dump, and decrements it
afterward.
As the disabled flag can be ignored, doing this today is not reliable.
Instead use the new tracer_tracing_disable() that calls into the ring
buffer code to do the disabling.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212235.381188238@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Allow a tracer to disable writing to its buffer for a temporary amount of
time and re-enable it.
The tracer_tracing_disable() will disable writing to the trace array
buffer, and requires a tracer_tracing_enable() to re-enable it.
The difference between tracer_tracing_disable() and tracer_tracing_off()
is that the disable version can nest, and requires as many enable() calls
as disable() calls to re-enable the buffer. Where as the off() function
can be called multiple times and only requires a singe tracer_tracing_on()
to re-enable the buffer.
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Thompson <danielt@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/20250505212235.210330010@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
TRACE_syscall.ptrace.negative_ENOSYS and TRACE_syscall.seccomp.negative_ENOSYS
on arm32 are being reported as failures instead of skipping.
The teardown_trace_fixture function sets the test to KSFT_FAIL in case of a
non 0 return value from the tracer process.
Due to _metadata now being shared between the forked processes the tracer is
returning the KSFT_SKIP value set by the tracee which is non 0.
Remove the setting of the _metadata.exit_code in teardown_trace_fixture.
Fixes: 24cf65a622 ("selftests/harness: Share _metadata between forked processes")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Link: https://lore.kernel.org/r/20250509115622.64775-1-terry.tritton@linaro.org
Signed-off-by: Kees Cook <kees@kernel.org>
The ACPI specification requires that battery rate is always positive,
but the kernel ABI for POWER_SUPPLY_PROP_CURRENT_NOW
(Documentation/ABI/testing/sysfs-class-power) specifies that it should
be negative when a battery is discharging. When reporting CURRENT_NOW,
massage the value to match the documented ABI.
This only changes the sign of `current_now` and not `power_now` because
documentation doesn't describe any particular meaning for `power_now` so
leaving `power_now` unchanged is less likely to confuse userspace
unnecessarily, whereas becoming consistent with the documented ABI is
worth potentially confusing clients that read `current_now`.
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Link: https://patch.msgid.link/20250508024146.1436129-1-pmarheine@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
tclock_gettime() is a wrapper around clock_gettime().
The first parameter of clock_gettime() is of type "clockid_t",
not "clock_t".
Use the correct type instead.
Link: https://lore.kernel.org/r/20250502-selftests-timens-fixes-v1-3-fb517c76f04d@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
These functions are never used outside their defining compilation unit and
can be made static.
Link: https://lore.kernel.org/r/20250502-selftests-timens-fixes-v1-2-fb517c76f04d@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The TAP specification requires that the output begins with a header line.
These headers lines are missing in the timens tests.
Print such a line.
Link: https://lore.kernel.org/r/20250502-selftests-timens-fixes-v1-1-fb517c76f04d@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
