struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250502-gpiochip-set-rv-powerpc-v2-2-488e43e325bf@linaro.org
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250502-gpiochip-set-rv-powerpc-v2-1-488e43e325bf@linaro.org
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series contains
- ACP sof stack improvements
- Add support for ACP7.1 platform.
- Soundwire IO support for ACP7.0 & ACP7.1 platforms
Link: https://github.com/thesofproject/linux/pull/5392
is_midr_in_range_list() reads beyond the end of these arrays.
-----BEGIN PGP SIGNATURE-----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=fddi
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Add missing sentinels to the arm64 Spectre-BHB MIDR arrays, otherwise
is_midr_in_range_list() reads beyond the end of these arrays"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
Commit 32607a332c ("ipv4: prefer multipath nexthop that matches source
address") changed IPv4 nexthop selection to prefer a nexthop whose
nexthop device is assigned the specified source address for locally
generated traffic.
While the selection honors the "fib_multipath_use_neigh" sysctl and will
not choose a nexthop with an invalid neighbour, it does not honor the
"ignore_routes_with_linkdown" sysctl and can choose a nexthop without a
carrier:
$ sysctl net.ipv4.conf.all.ignore_routes_with_linkdown
net.ipv4.conf.all.ignore_routes_with_linkdown = 1
$ ip route show 198.51.100.0/24
198.51.100.0/24
nexthop via 192.0.2.2 dev dummy1 weight 1
nexthop via 192.0.2.18 dev dummy2 weight 1 dead linkdown
$ ip route get 198.51.100.1 from 192.0.2.17
198.51.100.1 from 192.0.2.17 via 192.0.2.18 dev dummy2 uid 0
Solve this by skipping over nexthops whose assigned hash upper bound is
minus one, which is the value assigned to nexthops that do not have a
carrier when the "ignore_routes_with_linkdown" sysctl is set.
In practice, this probably does not matter a lot as the initial route
lookup for the source address would not choose a nexthop that does not
have a carrier in the first place, but the change does make the code
clearer.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
max8971 is written to work with or without extcon, but it fails
to link when built-in when the extcon subsystem is in a loadable
module:
x86_64-linux-ld: drivers/power/supply/max8971_charger.o: in function `max8971_probe':
max8971_charger.c:(.text+0x2ab): undefined reference to `extcon_find_edev_by_node'
Add the appropriate dependency that allows the working cases but
prevents the link failure.
Fixes: 60cd40eee4 ("power: supply: Add support for Maxim MAX8971 charger")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250503140431.438727-1-arnd@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
A bunch of small fixes. Mostly driver specific.
- An OOB access fix in core UMP rawmidi conversion code
- Fix for ASoC DAPM hw_params widget sequence
- Make retry of usb_set_interface() errors for flaky devices
- Fix redundant USB MIDI name strings
- Quirks for various HP and ASUS models with HD-audio, and
Jabra Evolve 65 USB-audio
- Cirrus Kunit test fixes
- Various fixes for ASoC Intel, stm32, renesas, imx-card, and
simple-card
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmgWIxcOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE+mNxAAor5bPSJZqFJSH5JV1MKPPqSpw37LZY6ia7vY
ieeDtFvQlaAn5gOfuwertTYtbPqsUG9npBKeB//mxqA9JAEgjfup5jKfgQiBJAOB
jwFy1fPQFVJqfZzS6FZVy3UF+jBJZMPe7GqlLxeELVxw0QY81KquDc15aeMmUR+k
XY8C19c98DX95/VaIzo8m9CQmYnTz+wujc2D7yMbiYkK9US+tuL4tKjPwu5i1b3R
74cfFF+LGU0BOZ+6X7bnUj0SYGs9jCKCZD2L4L2HnqQ1DvgYumTRtScrN8lVJeyv
GEg9OC/VR55myurd3lYcAQYkW4lm6d9MK8UmOl1o+6+FymRBRH+7wtnKRARdxcKL
DKhKIfKRtb2CivzGit6mScgoQI8xh/ZXPHRrQ9OPfqomYl6ez5WNdZREKV/1/f+W
8lHjcFkOvn0PHPhdKDVY8Fhfsb4eaMzcJGrhHOZD6CtvCNLT9oAwZxlzMFlNf1gp
E3J1HYDjrzYArUVwRw8KTx4eRss5uUFxxLie29b6asSiLlaOIOZUxwC6VhbPbxjm
3xXGGMC5IItH+UH4HV0TidLnaA7DhycvT6B9BU4RivDVC76ZVUw98RL0RbI/ljk+
Wf1oPTsrbQYdaNjodVW0LukGrLGCs0MT7v+oC0KK65F1yyblwrecpdOHml1Q1tOC
9T9uZNw=
=sF2D
-----END PGP SIGNATURE-----
Merge tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bunch of small fixes. Mostly driver specific.
- An OOB access fix in core UMP rawmidi conversion code
- Fix for ASoC DAPM hw_params widget sequence
- Make retry of usb_set_interface() errors for flaky devices
- Fix redundant USB MIDI name strings
- Quirks for various HP and ASUS models with HD-audio, and
Jabra Evolve 65 USB-audio
- Cirrus Kunit test fixes
- Various fixes for ASoC Intel, stm32, renesas, imx-card, and
simple-card"
* tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ASoC: amd: ps: fix for irq handler return status
ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction
ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers
ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers
ASoC: stm32: sai: add a check on minimal kernel frequency
ASoC: stm32: sai: skip useless iterations on kernel rate loop
ALSA: hda/realtek - Add more HP laptops which need mute led fixup
ALSA: hda/realtek: Fix built-mic regression on other ASUS models
ASoC: Intel: catpt: avoid type mismatch in dev_dbg() format
ALSA: usb-audio: Fix duplicated name in MIDI substream names
ALSA: ump: Fix buffer overflow at UMP SysEx message conversion
ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-df1xxx
ALSA: hda: Apply volume control on speaker+lineout for HP EliteStudio AIO
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013
ASoC: amd: acp: Fix devm_snd_soc_register_card(acp-pdm-mach) failure
ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot
ASoC: amd: acp: Fix NULL pointer deref on acp resume path
ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS()
ASoC: soc-acpi-intel-ptl-match: add empty item to ptl_cs42l43_l3[]
...
Test the basic functionality for the NUMA and MPOL flags:
- FUTEX2_NUMA should take the NUMA node which is after the uaddr
and use it.
- Only update the node if FUTEX_NO_NODE was set by the user
- FUTEX2_MPOL should use the memory based on the policy. I attempted to
set the node with mbind() and then use this with MPOL but this fails
and futex falls back to the default node for the current CPU.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-22-bigeasy@linutronix.de
Test the basic functionality of the private hash:
- Upon start, with no threads there is no private hash.
- The first thread initializes the private hash.
- More than four threads will increase the size of the private hash if
the system has more than 16 CPUs online.
- Once the user sets the size of private hash, auto scaling is disabled.
- The user is only allowed to use numbers to the power of two.
- The user may request the global or make the hash immutable.
- Once the global hash has been set or the hash has been made immutable,
further changes are not allowed.
- Futex operations should work the whole time. It must be possible to
hold a lock, such a PI initialised mutex, during the resize operation.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-21-bigeasy@linutronix.de
Add the -b/ --buckets argument to specify the number of hash buckets for
the private futex hash. This is directly passed to
prctl(PR_FUTEX_HASH, PR_FUTEX_HASH_SET_SLOTS, buckets, immutable)
and must return without an error if specified. The `immutable' is 0 by
default and can be set to 1 via the -I/ --immutable argument.
The size of the private hash is verified with PR_FUTEX_HASH_GET_SLOTS.
If PR_FUTEX_HASH_GET_SLOTS failed then it is assumed that an older
kernel was used without the support and that the global hash is used.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-20-bigeasy@linutronix.de
Extend the futex2 interface to be aware of mempolicy.
When FUTEX2_MPOL is specified and there is a MPOL_PREFERRED or
home_node specified covering the futex address, use that hash-map.
Notably, in this case the futex will go to the global node hashtable,
even if it is a PRIVATE futex.
When FUTEX2_NUMA|FUTEX2_MPOL is specified and the user specified node
value is FUTEX_NO_NODE, the MPOL lookup (as described above) will be
tried first before reverting to setting node to the local node.
[bigeasy: add CONFIG_FUTEX_MPOL, add MPOL to FUTEX2_VALID_MASK, write
the node only to user if FUTEX_NO_NODE was supplied]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-18-bigeasy@linutronix.de
Extend the futex2 interface to be numa aware.
When FUTEX2_NUMA is specified for a futex, the user value is extended
to two words (of the same size). The first is the user value we all
know, the second one will be the node to place this futex on.
struct futex_numa_32 {
u32 val;
u32 node;
};
When node is set to ~0, WAIT will set it to the current node_id such
that WAKE knows where to find it. If userspace corrupts the node value
between WAIT and WAKE, the futex will not be found and no wakeup will
happen.
When FUTEX2_NUMA is not set, the node is simply an extension of the
hash, such that traditional futexes are still interleaved over the
nodes.
This is done to avoid having to have a separate !numa hash-table.
[bigeasy: ensure to have at least hashsize of 4 in futex_init(), add
pr_info() for size and allocation information. Cast the naddr math to
void*]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-17-bigeasy@linutronix.de
My initial testing showed that:
perf bench futex hash
reported less operations/sec with private hash. After using the same
amount of buckets in the private hash as used by the global hash then
the operations/sec were about the same.
This changed once the private hash became resizable. This feature added
an RCU section and reference counting via atomic inc+dec operation into
the hot path.
The reference counting can be avoided if the private hash is made
immutable.
Extend PR_FUTEX_HASH_SET_SLOTS by a fourth argument which denotes if the
private should be made immutable. Once set (to true) the a further
resize is not allowed (same if set to global hash).
Add PR_FUTEX_HASH_GET_IMMUTABLE which returns true if the hash can not
be changed.
Update "perf bench" suite.
For comparison, results of "perf bench futex hash -s":
- Xeon CPU E5-2650, 2 NUMA nodes, total 32 CPUs:
- Before the introducing task local hash
shared Averaged 1.487.148 operations/sec (+- 0,53%), total secs = 10
private Averaged 2.192.405 operations/sec (+- 0,07%), total secs = 10
- With the series
shared Averaged 1.326.342 operations/sec (+- 0,41%), total secs = 10
-b128 Averaged 141.394 operations/sec (+- 1,15%), total secs = 10
-Ib128 Averaged 851.490 operations/sec (+- 0,67%), total secs = 10
-b8192 Averaged 131.321 operations/sec (+- 2,13%), total secs = 10
-Ib8192 Averaged 1.923.077 operations/sec (+- 0,61%), total secs = 10
128 is the default allocation of hash buckets.
8192 was the previous amount of allocated hash buckets.
- Xeon(R) CPU E7-8890 v3, 4 NUMA nodes, total 144 CPUs:
- Before the introducing task local hash
shared Averaged 1.810.936 operations/sec (+- 0,26%), total secs = 20
private Averaged 2.505.801 operations/sec (+- 0,05%), total secs = 20
- With the series
shared Averaged 1.589.002 operations/sec (+- 0,25%), total secs = 20
-b1024 Averaged 42.410 operations/sec (+- 0,20%), total secs = 20
-Ib1024 Averaged 740.638 operations/sec (+- 1,51%), total secs = 20
-b65536 Averaged 48.811 operations/sec (+- 1,35%), total secs = 20
-Ib65536 Averaged 1.963.165 operations/sec (+- 0,18%), total secs = 20
1024 is the default allocation of hash buckets.
65536 was the previous amount of allocated hash buckets.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20250416162921.513656-16-bigeasy@linutronix.de
The mm_struct::futex_hash_lock guards the futex_hash_bucket assignment/
replacement. The futex_hash_allocate()/ PR_FUTEX_HASH_SET_SLOTS
operation can now be invoked at runtime and resize an already existing
internal private futex_hash_bucket to another size.
The reallocation is based on an idea by Thomas Gleixner: The initial
allocation of struct futex_private_hash sets the reference count
to one. Every user acquires a reference on the local hash before using
it and drops it after it enqueued itself on the hash bucket. There is no
reference held while the task is scheduled out while waiting for the
wake up.
The resize process allocates a new struct futex_private_hash and drops
the initial reference. Synchronized with mm_struct::futex_hash_lock it
is checked if the reference counter for the currently used
mm_struct::futex_phash is marked as DEAD. If so, then all users enqueued
on the current private hash are requeued on the new private hash and the
new private hash is set to mm_struct::futex_phash. Otherwise the newly
allocated private hash is saved as mm_struct::futex_phash_new and the
rehashing and reassigning is delayed to the futex_hash() caller once the
reference counter is marked DEAD.
The replacement is not performed at rcuref_put() time because certain
callers, such as futex_wait_queue(), drop their reference after changing
the task state. This change will be destroyed once the futex_hash_lock
is acquired.
The user can change the number slots with PR_FUTEX_HASH_SET_SLOTS
multiple times. An increase and decrease is allowed and request blocks
until the assignment is done.
The private hash allocated at thread creation is changed from 16 to
16 <= 4 * number_of_threads <= global_hash_size
where number_of_threads can not exceed the number of online CPUs. Should
the user PR_FUTEX_HASH_SET_SLOTS then the auto scaling is disabled.
[peterz: reorganize the code to avoid state tracking and simplify new
object handling, block the user until changes are in effect, allow
increase and decrease of the hash].
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-15-bigeasy@linutronix.de
The futex hash is system wide and shared by all tasks. Each slot
is hashed based on futex address and the VMA of the thread. Due to
randomized VMAs (and memory allocations) the same logical lock (pointer)
can end up in a different hash bucket on each invocation of the
application. This in turn means that different applications may share a
hash bucket on the first invocation but not on the second and it is not
always clear which applications will be involved. This can result in
high latency's to acquire the futex_hash_bucket::lock especially if the
lock owner is limited to a CPU and can not be effectively PI boosted.
Introduce basic infrastructure for process local hash which is shared by
all threads of process. This hash will only be used for a
PROCESS_PRIVATE FUTEX operation.
The hashmap can be allocated via:
prctl(PR_FUTEX_HASH, PR_FUTEX_HASH_SET_SLOTS, num);
A `num' of 0 means that the global hash is used instead of a private
hash.
Other values for `num' specify the number of slots for the hash and the
number must be power of two, starting with two.
The prctl() returns zero on success. This function can only be used
before a thread is created.
The current status for the private hash can be queried via:
num = prctl(PR_FUTEX_HASH, PR_FUTEX_HASH_GET_SLOTS);
which return the current number of slots. The value 0 means that the
global hash is used. Values greater than 0 indicate the number of slots
that are used. A negative number indicates an error.
For optimisation, for the private hash jhash2() uses only two arguments
the address and the offset. This omits the VMA which is always the same.
[peterz: Use 0 for global hash. A bit shuffling and renaming. ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-13-bigeasy@linutronix.de
Factor out the futex_hash_bucket initialisation into a helpr function.
The helper function will be used in a follow up patch implementing
process private hash buckets.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-12-bigeasy@linutronix.de
futex_lock_pi() and __fixup_pi_state_owner() acquire the
futex_q::lock_ptr without holding a reference assuming the previously
obtained hash bucket and the assigned lock_ptr are still valid. This
isn't the case once the private hash can be resized and becomes invalid
after the reference drop.
Introduce futex_q_lockptr_lock() to lock the hash bucket recorded in
futex_q::lock_ptr. The lock pointer is read in a RCU section to ensure
that it does not go away if the hash bucket has been replaced and the
old pointer has been observed. After locking the pointer needs to be
compared to check if it changed. If so then the hash bucket has been
replaced and the user has been moved to the new one and lock_ptr has
been updated. The lock operation needs to be redone in this case.
The locked hash bucket is not returned.
A special case is an early return in futex_lock_pi() (due to signal or
timeout) and a successful futex_wait_requeue_pi(). In both cases a valid
futex_q::lock_ptr is expected (and its matching hash bucket) but since
the waiter has been removed from the hash this can no longer be
guaranteed. Therefore before the waiter is removed and a reference is
acquired which is later dropped by the waiter to avoid a resize.
Add futex_q_lockptr_lock() and use it.
Acquire an additional reference in requeue_pi_wake_futex() and
futex_unlock_pi() while the futex_q is removed, denote this extra
reference in futex_q::drop_hb_ref and let the waiter drop the reference
in this case.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-11-bigeasy@linutronix.de
To support runtime resizing of the process private hash, it's required
to not use the obtained hash bucket once the reference count has been
dropped. The reference will be dropped after the unlock of the hash
bucket.
The amount of waiters is decremented after the unlock operation. There
is no requirement that this needs to happen after the unlock. The
increment happens before acquiring the lock to signal early that there
will be a waiter. The waiter can avoid blocking on the lock if it is
known that there will be no waiter.
There is no difference in terms of ordering if the decrement happens
before or after the unlock.
Decrease the waiter count before the unlock operation.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-10-bigeasy@linutronix.de
futex_wait_multiple_setup() changes task_struct::__state to
!TASK_RUNNING and then enqueues on multiple futexes. Every
futex_q_lock() acquires a reference on the global hash which is
dropped later.
If a rehash is in progress then the loop will block on
mm_struct::futex_hash_bucket for the rehash to complete and this will
lose the previously set task_struct::__state.
Acquire a reference on the local hash to avoiding blocking on
mm_struct::futex_hash_bucket.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-9-bigeasy@linutronix.de
Create explicit scopes for hb variables; almost pure re-indent.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-6-bigeasy@linutronix.de
Getting the hash bucket and queuing it are two distinct actions. In
light of wanting to add a put hash bucket function later, untangle
them.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-5-bigeasy@linutronix.de
futex_wait_setup() has a weird calling convention in order to return
hb to use as an argument to futex_queue().
Mostly such that requeue can have an extra test in between.
Reorder code a little to get rid of this and keep the hb usage inside
futex_wait_setup().
[bigeasy: fixes]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-4-bigeasy@linutronix.de
To enable node specific hash-tables using huge pages if possible.
[bigeasy: use __vmalloc_node_range_noprof(), add nommu bits, inline
vmalloc_huge]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250416162921.513656-3-bigeasy@linutronix.de
rcuref_read() returns the number of references that are currently held.
If 0 is returned then it is not safe to assume that the object ca be
scheduled for deconstruction because it is marked DEAD. This happens if
the return value of rcuref_put() is ignored and assumptions are made.
If 0 is returned then the counter transitioned from 0 to RCUREF_NOREF.
If rcuref_put() did not return to the caller then the counter did not
yet transition from RCUREF_NOREF to RCUREF_DEAD. This means that there
is still a chance that the counter will transition from RCUREF_NOREF to
0 meaning it is still valid and must not be deconstructed. In this brief
window rcuref_read() will return 0.
Provide rcuref_is_dead() to determine if the counter is marked as
RCUREF_DEAD.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-2-bigeasy@linutronix.de
The panel can be connected to via graph nodes, so allow the port property.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250430082850.244199-3-heiko@sntech.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The panel can be connected to via graph nodes, so allow the port property.
This fixes dtc checker warnings like:
>> arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-haikou-video-demo.dtb: panel@0 (leadtek,ltk050h3148w): 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/panel/leadtek,ltk050h3146w.yaml#
arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-haikou-video-demo.dtb: /edp@fdec0000: failed to match any schema with compatible: ['rockchip,rk3588-edp']
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504300218.VDqQqGTT-lkp@intel.com/
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250430082850.244199-2-heiko@sntech.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Ever since commit f5f80e32de ("ipv6: remove hard coded limitation on
ipv6_pinfo") that protocols stopped using the old "obj_size -
sizeof(struct ipv6_pinfo)" way of grabbing ipv6_pinfo, that severely
restricted struct layout and caused fun, hard to see issues.
However, mptcp_inet6_sk wasn't fixed (unlike tcp_inet6_sk). Do so.
The non-cloned sockets already do the right thing using
ipv6_pinfo_offset + the generic IPv6 code.
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250430154541.1038561-1-pfalcato@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: replace speed_mode_2500() method
This series replaces the speed_mode_2500() method with a new method
that is more flexible, allowing the platform glue driver to populate
phylink's supported_interfaces and set the PHY-side interface mode.
The only user of this method is currently dwmac-intel, which we
update to use this new method.
====================
Link: https://patch.msgid.link/aBNe0Vt81vmqVCma@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the speed_mode_2500() platform method which is no longer used
or necessary, being superseded by the more flexible get_interfaces()
method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uASM3-0021R3-2B@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TGL platforms support either SGMII or 2500BASE-X, which is determined
by reading a SERDES register.
Thus, plat->phy_interface (and phylink's supported_interfaces) depend
on this. Use the new .get_interfaces() method to set both
plat->phy_interface and the supported_interfaces bitmap.
This removes the only user of the .speed_mode_2500() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uASLx-0021Qs-Uz@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the initialisation of plat->phy_interface to tgl_common_data()
as all callers set this same interface mode. This moves it to a
single location to make the change to get_interfaces() more obvious.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uASLs-0021Qk-Qt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a get_interfaces() platform method to allow platforms to indicate
to phylink which interface modes they support - which then allows
phylink to validate on initialisation that the configured PHY interface
mode is actually supported.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uASLn-0021Qd-Mi@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid using a local variable for priv->plat->phy_interface as this
may be modified in the .get_interfaces() method added in a future
commit.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uASLi-0021QX-HG@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use a local variable for priv->phylink_config in stmmac_phy_setup()
which makes the code a bit easier to read, allowing some lines to be
merged.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uASLd-0021QR-Cu@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable/disable seems to be racy on SMP, consider the following scenario:
CPU0 CPU1
interrupt_cnt_enable_write(true)
{
if (priv->enabled == enable)
return 0;
if (enable) {
priv->enabled = true;
interrupt_cnt_enable_write(false)
{
if (priv->enabled == enable)
return 0;
if (enable) {
priv->enabled = true;
enable_irq(priv->irq);
} else {
disable_irq(priv->irq)
priv->enabled = false;
}
enable_irq(priv->irq);
} else {
disable_irq(priv->irq);
priv->enabled = false;
}
The above would result in priv->enabled == false, but IRQ left enabled.
Protect both write (above race) and read (to propagate the value on SMP)
callbacks with a mutex.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Fixes: a55ebd47f2 ("counter: add IRQ or GPIO based counter")
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250331163642.2382651-1-alexander.sverdlin@siemens.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
A fairly small pile of fixes, plus one new compatible string addition to
the Synopsis driver for a new platform. The most notable thing is the
fix for divide by zeros in spi-mem if an operation has no dummy bytes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmgVU+4ACgkQJNaLcl1U
h9DtiQf/WFONuTRhVXKO7yn3W3ZPP0zWi9RjKH/n8ZW7R6My7y3XwYraPKHsCYvf
xr856tK0hsY2k8Gg7zvE0oCAu+K4kSSV6IXumbj55MMWameermAL8WXgFl/yhFvT
nuU6Rp7EgOY1sl+UUChggb1Kr1xz5MMbrnuECKynFpzxx0RGNymrLNHcC2pl2yF/
nSBwMu2pWTh8SZUoxxDqfH3PQvpyq6i7V28zZ/J9XHz7GhfVwjA6U1xZlXjUuqyq
zP4oABUmktqCaySgRM3aj5mhoIfG/Ywxz8jAt9+hE/Bpo7a5tpxMBVzhBfbPYT3g
x7vYsAJ9yMw9DIdOykuyZ/pcuKPbdg==
=kk6A
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A fairly small pile of fixes, plus one new compatible string addition
to the Synopsis driver for a new platform.
The most notable thing is the fix for divide by zeros in spi-mem if an
operation has no dummy bytes"
* tag 'spi-fix-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: tegra114: Don't fail set_cs_timing when delays are zero
spi: spi-qpic-snand: fix NAND_READ_LOCATION_2 register handling
spi: spi-mem: Add fix to avoid divide error
spi: dt-bindings: snps,dw-apb-ssi: Add compatible for SOPHGO SG2042 SoC
spi: dt-bindings: snps,dw-apb-ssi: Merge duplicate compatible entry
spi: spi-qpic-snand: propagate errors from qcom_spi_block_erase()
spi: stm32-ospi: Fix an error handling path in stm32_ospi_probe()
Enable SoundWire host wake interrupt mask during acp init
sequence based on wake enable checks for each SoundWire manager
instance for ACP7.0 & ACP7.1 platforms.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250502154445.3008598-8-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
